Im waiting for cm14.1 for our redmi 4 prime.
Is there any links?
==================
NEW from @wsydgx
==================
ReUploaded m13 19-01-2017
https://drive.google.com/file/d/0BzNLclqMCVhgRlJhZ2QxcHhUZmM/view
____
@xiaobai112220 ported CM13 onto Redmi 4 Prime (625 ONLY)
Here is the original thread (in Chinese)
http://www.miui.com/thread-6365009-1-1.html
I've downloaded ROM from the Chinese site and re-uploaded to Google Drive for faster download.
https://drive.google.com/open?id=0Bz...HUyMm8yZ19UbVU
NOTE: BEFORE flashing this ROM you need to unlock the bootloader and flash TWRP recovery made by Cofface
No one will be responsible for any damage it may occur your device and all credit goes to @xiaobai112220 and @cofface
I have not come cross by any cm versions yet. I'll bet we are awaiting kernel sources to be released by xiaomi before we have any developers working on this device.
krestean said:
awaiting kernel sources to be released by xiaomi before we have any developers working on this device.
Click to expand...
Click to collapse
I did a bit of searching and on the mi5 they waited more than 5 months to released the kernel source and they release the MIUI 7 kernel source as they rolled out the MIUI 8 update. I want to buy this phone so badly, but I am holding my breath for now. Anyone know more about the time that xiaomi usually takes to release the kernel sources?
I saw someone wrote "xiaomi is the blackberry of the east" LOL. I hope that was just a troll, I really want to buy the redmi 4 prime.
yep... CM14.1 would be nice or CM13 at least.
But you are right about the kernel sources
on Redmi 3S brave developers had built their own kernel for CM13 and it's working pretty stable
Maybe we have luck and there's a nice, brave developer for our Redmi 4 Pro ?
Fingers Crossed!
@xiaobai112220 ported CM13 onto Redmi 4 Prime (625 ONLY)
Here is the original thread (in Chinese)
http://www.miui.com/thread-6365009-1-1.html
I've downloaded ROM from the Chinese site and re-uploaded to Google Drive for faster download.
https://drive.google.com/open?id=0Bzzy8W2VPrH7THUyMm8yZ19UbVU
NOTE: BEFORE flashing this ROM you need to unlock the bootloader and flash TWRP recovery made by Cofface
No one will be responsible for any damage it may occur your device and all credit goes to @xiaobai112220 and @cofface
wsydgx said:
@xiaobai112220 ported CM13 onto Redmi 4 Prime (625 ONLY)
Here is the original thread (in Chinese)
I've downloaded ROM from the Chinese site and re-uploaded to Google Drive for faster download.
NOTE: BEFORE flashing this ROM you need to unlock the bootloader and flash TWRP recovery made by Cofface
No one will be responsible for any damage it may occur your device and all credit goes to @xiaobai112220 and @cofface
Click to expand...
Click to collapse
Whoa, thanks for the info and reupload!
Just got my bootloader unlock permission yesterday but still stuck at 50% unlocking process
EDIT : Got my device unlocked
wsydgx said:
@xiaobai112220 ported CM13 onto Redmi 4 Prime (625 ONLY)
Here is the original thread (in Chinese)
http://www.miui.com/thread-6365009-1-1.html
I've downloaded ROM from the Chinese site and re-uploaded to Google Drive for faster download.
https://drive.google.com/open?id=0Bzzy8W2VPrH7THUyMm8yZ19UbVU
NOTE: BEFORE flashing this ROM you need to unlock the bootloader and flash TWRP recovery made by Cofface
No one will be responsible for any damage it may occur your device and all credit goes to @xiaobai112220 and @cofface
Click to expand...
Click to collapse
Thanks! I've overseen this
Anyone tested yet ? My google translater tells me something about LED Notification bug ?
EDIT: I flashed it and I'm using it for 4 hours now - it's completely stable until now, the only bug is that the soft touch buttons are not reconfigurable.. and the LED Flash isn't working...
d3s4nn said:
Thanks! I've overseen this
Anyone tested yet ? My google translater tells me something about LED Notification bug ?
EDIT: I flashed it and I'm using it for 4 hours now - it's completely stable until now, the only bug is that the soft touch buttons are not reconfigurable.. and the LED Flash isn't working...
Click to expand...
Click to collapse
Mine flashed and running for about 8 hours and yes, it's quite stable.
My LED Flash working just fine either in camera or as Flashlight.
Also, I solved soft touch bug with temporary fix using GravityBox via Xposed.
ilhamazdi said:
Mine flashed and running for about 8 hours and yes, it's quite stable.
My LED Flash working just fine either in camera or as Flashlight.
Also, I solved soft touch bug with temporary fix using GravityBox via Xposed.
Click to expand...
Click to collapse
Sorry I meant the Notification LED xD it's not working
With Gravity Box it's possible ? Cool I'll try
EDIT: Another big problem is the chinese bloatware, which reinstalls every reboot - it's annoying, reflashed my MIUI backup
Can you guys post some screenshots???
d3s4nn said:
Sorry I meant the Notification LED xD it's not working
With Gravity Box it's possible ? Cool I'll try
EDIT: Another big problem is the chinese bloatware, which reinstalls every reboot - it's annoying, reflashed my MIUI backup
Click to expand...
Click to collapse
Yep, notification led only works for charging indicator.
Those chinese bloatware doesn't reinstall in my case. But it does auto startup and takes about ~100MB of RAM which is quite annoying.
Another bug is Video Recording (idk if this is CM13 bug or ROM port bug), so when you record a video whether using Stock Camera app or third party app, video result is freezing but the sound play just fine.
fforward72 said:
Can you guys post some screenshots???
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
look at this guys!
http://www.miui.com/thread-6549643-1-1.html
ilhamazdi said:
Whoa, thanks for the info and reupload!
Just got my bootloader unlock permission yesterday but still stuck at 50% unlocking process
Click to expand...
Click to collapse
Did you have try unlock without sim card, it working on me.. :fingers-crossed:
Nethill said:
Did you have try unlock without sim card, it working on me.. :fingers-crossed:
Click to expand...
Click to collapse
I did unlock my phone using this method
Code:
http://en.miui.com/forum.php?mod=redirect&goto=findpost&ptid=425058&pid=7967588
has anybody tried that CM14 Rom? ( http://www.miui.com/thread-6549643-1-1.html )
angelgf90 said:
has anybody tried that CM14 Rom? ( http://www.miui.com/thread-6549643-1-1.html )
Click to expand...
Click to collapse
I think it's not yet released.
But, there is another CM13 ROM for our china friends.
Loading it right now, will post a link to GDrive later.
Here it is. testing right meow.
It installs a s***load of bloatware. Also, xposed dont work.
tl;dr dont install it.
alexeius said:
I think it's not yet released.
But, there is another CM13 ROM for our china friends.
Loading it right now, will post a link to GDrive later.
Here it is. testing right meow.
It installs a s***load of bloatware. Also, xposed dont work.
tl;dr dont install it.
Click to expand...
Click to collapse
Hmmm thank you for testing!
Any bugs discovered ? everything working ?
I hate those chinese bloatware
d3s4nn said:
Hmmm thank you for testing!
Any bugs discovered ? everything working ?
I hate those chinese bloatware
Click to expand...
Click to collapse
As in the previous CM13 build, camera does'not work in video mode, buttons virbation is low, and the recents button is working like a menu button.
Oh, and notification light is not working.
This is a pointless build, the previous one mentioned in the thread has only 2 chinese apps and basically is the same rom.
is not possible to install xposed in this rom?
Nethill said:
Did you have try unlock without sim card, it working on me.. :fingers-crossed:
Click to expand...
Click to collapse
Here are things to check for you:
Oem unlock on your dev settings: must be on
USB debugging on your sev settings: must be on
Drivers on your PC: must be updated/ok
Log in MIUI account your device: must be logged in
X send reply: ?
---------- Post added at 11:33 PM ---------- Previous post was at 11:31 PM ----------
ilhamazdi said:
Whoa, thanks for the info and reupload!
Just got my bootloader unlock permission yesterday but still stuck at 50% unlocking process
Click to expand...
Click to collapse
Here are things to check for you:
Oem unlock on your dev settings: must be on
USB debugging on your sev settings: must be on
Drivers on your PC: must be updated/ok
Log in MIUI account your device: must be logged in
Related
Hello everyone,
Today we just got something super cool, a custom kernel for our desire 510. Its only working on vm and sprint models but basically this is just a stock kernel for now with no goodies other than write protect being removed.
[Disclaimer]I'm not responsible for anything that happens as a result of this pending flash. Do not cry to me if your phone goes up in flames or if your wife leaves you due to you being addicted to your phone.
I take no credit for the actual kernel build or anything like that. All credit goes to rbheromax. The kernel is currently being edited and uploaded. ETA is about an hour or so.
Instructions:
Pull the battery and put it back in then press and hold vol - and pwr.
When in hboot navigate to the fastboot option and click the pwr button.
When in fastboot connect your phone and on your pc press and hold shift and right click your downloads folder. Then click open command prompt here.
Next type fastboot flash boot b.img and tap enter.
Done!!!
Screenies:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Downloads: https://www.mediafire.com/?2yq87z9yetb371d
After this is uploaded my rom will be finished and uploaded soon too. Thank you.
XDA:DevDB Information
Stock Kernel Write Protection Removed, Kernel for the HTC Desire 510
Contributors
CurbThePain, rbheromax (android forums)
Source Code: http://androidforums.com/threads/virgin-sprint-kernel-desire-510-write-protection-removed.885145/
Kernel Special Features: Write Protection Removed, maybe oc soon, and tap htc logo to wake.
Version Information
Status: Testing
Created 2014-12-01
Last Updated 2014-12-01
Can a moderator please move this thread to the android development section i forgot to change the section before i posted.
It works!
And here is rbheromax's kernel. working on Boost Mobile Desire 510!
LarryBoyG said:
And here is rbheromax's kernel. working on Boost Mobile Desire 510!
Click to expand...
Click to collapse
Hey man. Try not to quote the op XD yes its definitely working.
CurbThePain said:
Hey man. Try not to quote the op XD yes its definitely working.
Click to expand...
Click to collapse
oops sorry about that.
Works as advertised. Great job OP
already have recovery, root, superuser, busybox installed... Followed instructions and worked like a charm, Already deleting bloatware as we speak... Now to figure out which HTC bull**** is safe to remove..
Since BOOST is via Sprint can anyone confirm success with BOOST?
I have boost, it works.
Sent from my 0PCV1 using XDA Free mobile app
LarryBoyG said:
I have boost, it works.
Sent from my 0PCV1 using XDA Free mobile app
Click to expand...
Click to collapse
Sweet, I figured it would, flashing now.
Another confirmation, VM.
Can i use it without root and recovery?
Working for me as well, thank you! Now to remove HTC's and VM's crap! What we need now is a list of things we can remove without bricking the phone :silly:
Seriously, this is awesome. Thank you.
can you link me EU stock kernel pls? I installed this kernel and i got bootloop,my phone no boot :/ only can go to hboot
vwadam said:
can you link me EU stock kernel pls? I installed this kernel and i got bootloop,my phone no boot :/ only can go to hboot
Click to expand...
Click to collapse
Not sure if this is what you wanted. but heres a link: htcdev.com/devcenter/downloads
---------- Post added at 09:45 AM ---------- Previous post was at 09:40 AM ----------
CurbThePain said:
Hello everyone,
Today we just got something super cool, a custom kernel for our desire 510. Its only working on vm and sprint models but basically this is just a stock kernel for now with no goodies other than write protect being removed.
[Disclaimer]I'm not responsible for anything that happens as a result of this pending flash. Do not cry to me if your phone goes up in flames or if your wife leaves you due to you being addicted to your phone.
I take no credit for the actual kernel build or anything like that. All credit goes to rbheromax. The kernel is currently being edited and uploaded. ETA is about an hour or so.
Instructions:
Pull the battery and put it back in then press and hold vol - and pwr.
When in hboot navigate to the fastboot option and click the pwr button.
When in fastboot connect your phone and on your pc press and hold shift and right click your downloads folder. Then click open command prompt here.
Next type fastboot flash boot b.img and tap enter.
Done!!!
Screenies:
Downloads: https://www.mediafire.com/?2yq87z9yetb371d
After this is uploaded my rom will be finished and uploaded soon too. Thank you.
XDA:DevDB Information
Stock Kernel Write Protection Removed, Kernel for the HTC Desire 510
Contributors
CurbThePain, rbheromax (android forums)
Source Code: http://androidforums.com/threads/virgin-sprint-kernel-desire-510-write-protection-removed.885145/
Kernel Special Features: Write Protection Removed, maybe oc soon, and tap htc logo to wake.
Version Information
Status: Testing
Created 2014-12-01
Last Updated 2014-12-01
Can a moderator please move this thread to the android development section i forgot to change the section before i posted.
Click to expand...
Click to collapse
Will this work on Cricket phone?? Thank you
aaron74 said:
Not sure if this is what you wanted. but heres a link: htcdev.com/devcenter/downloads
Click to expand...
Click to collapse
I have alredy found it,but its sources and i dont know how to use it on phone..I need a stock kernel in img file
vwadam said:
can you link me EU stock kernel pls? I installed this kernel and i got bootloop,my phone no boot :/ only can go to hboot
Click to expand...
Click to collapse
Ill put in the description its only for the US version of the Desire 510 so no one makes the mistake of flashing this kernel on the wrong device.
rainbowtuba said:
Working for me as well, thank you! Now to remove HTC's and VM's crap! What we need now is a list of things we can remove without bricking the phone :silly:
Seriously, this is awesome. Thank you.
Click to expand...
Click to collapse
A few things you CAN remove are the voicemail app, Mobile ID, Htc Mobile Guide, KeyVPN, Lumen Toolbar, Polaris Office and i believe thats all. Im not to sure about the qualcomm app. I would keep it just to be safe.
CurbThePain said:
Ill put in the description its only for the US version of the Desire 510 so no one makes the mistake of flashing this kernel on the wrong device.
Click to expand...
Click to collapse
Ok thank you.
So,this is mean i can get back my phone and its boot or i never will get it boot again?
Sorry for bad english...
Apps I have removed without issues.
I actually uninstalled the qulacomm app and phone still works just fine. I also removed, HTC guide, HTC gallery, HTC dot view, HTC service pack, HTC blink feed, Messaging Plus, Lumen Toolbar, Stock internet browser, Anything involving google besides framework and play store (redownloaded apps to let them be a user app to move to SD card.)... A few others I can't remember as well, But what is interesting is that after removing all of that bloat... I really don't have that much internal space available still.......... Getting sick of phones with storage issues.. A smartphone can only be as smart as the apps installed on it.. But yet after my crucial 25 apps I have no storage space to install anything else. :/
vwadam said:
Ok thank you.
So,this is mean i can get back my phone and its boot or i never will get it boot again?
Sorry for bad english...
Click to expand...
Click to collapse
Its alright . And if you can download the eu source and build the stock kernel sure. If you dont know how to you might have to wait till someone picks up the eu model and makes a custom kernel for that your model. I dont currently have that model. Let me ask my buddy if he can build you a stock eu kernel.
CurbThePain said:
Its alright . And if you can download the eu source and build the stock kernel sure. If you dont know how to you might have to wait till someone picks up the eu model and makes a custom kernel for that your model. I dont currently have that model. Let me ask my buddy if he can build you a stock eu kernel.
Click to expand...
Click to collapse
I can't build stock kernel from source
So i need wait for Eu recovery and Eu kernel too for get my phone back from bootloop :/
Alright,thanks.
Hey there! I'm just a builder who want to share with all of you the compiled sources of Paranoid (Credits to the team for all the work and gerrit patches I've used).
It's an alpha, so it doesn't have many features:
- It has an advanced power menu with options to reboot (recovery, bootloader, reboot), screenshots, etc.
- Head-up notifications have been improve (using Hover sources I guess)
- Ambient Display has been added for our device too (replacing peek at this moment)
- Quick unlock is enabled.
- Quicksettings' tiles reorder
- Inmersion mode with tile support
- OnTheSpot is now implemented, but there isn't any example of it.
- ParanoidOTA comes with the rom, but isn't functional right now.
- Another smalls changes and improvements.
- CM12 Theme Engine
- Linked volumes and expandable volume panel
- Added a standalone File Manager
If you want to check all the new stuff of every build please visit gerrit. It works fine with TWRP and also multirom.
All the builds like build 4 or newer, will be compile from sources, without adding any feature, so they will be clean builds. I will try to get new ones every month until the team release their own ones, so enjoy them, and if you like my work, click Thanks #StayParanoid
Links
ROM(build 5): https://goo.gl/AvVlwz
GERRIT(changelog): http://goo.gl/wZamJf
GAPPS: http://goo.gl/kNcpB7
ROOT:http://goo.gl/DUhWyI
Installation
- Download the rom, the gapps you prefer and the root zip.
- Do a factory wipe in recovery (if you are updating from a previus paranoid 5.1 build just wipe dalvik&cache).
- Flash the three zips in the same order as above.
- Reboot and enjoy the rom!
Old Builds
Build 1 (11/01): http://goo.gl/kRMTBV
Build 2 (18/01): http://goo.gl/Xd6XXS
Build 3 (1/02): http://goo.gl/kLx10r
Build 4 (26/05): https://goo.gl/eaZg0O
Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
One of my favorite ROMs since I moved to Android! Flashing for sure later! Moving to this ASAP xD
Sent from my Nexus 4 using XDA Free mobile app
damn, wont flash with twrp 2.8.3.2 ....
DJ_Uro_UE said:
damn, wont flash with twrp 2.8.3.2 ....
Click to expand...
Click to collapse
What's the problem?
Thanks bud!
Wooohooooo!!! It's finally coming!! :cyclops: Thanks for the build
many many MANY bugs with this...rotation does not work...even messes with rotation apps. Reboot menu only has reboot...no recovery or bootloader option. LTE 100% does not work...switch it on and loose data altogether. Rom will not flash in TWRP 2840...something about symlinks.
That's all I found before I got fed up and restored my factory backup. Seriously, thank you for taking the time to build and share this...I'm appreciative of that, believe me. This is just as far from usable for a daily rom as I've seen in a long time is all.
hp420 said:
many many MANY bugs with this...rotation does not work...even messes with rotation apps. Reboot menu only has reboot...no recovery or bootloader option. LTE 100% does not work...switch it on and loose data altogether. Rom will not flash in TWRP 2840...something about symlinks.
That's all I found before I got fed up and restored my factory backup. Seriously, thank you for taking the time to build and share this...I'm appreciative of that, believe me. This is just as far from usable for a daily rom as I've seen in a long time is all.
Click to expand...
Click to collapse
It's a shame that it has all this problems, but you have to remind that this is an alpha version , and for example you can find in gerrit patches for LTE that are in state of review, so if you want I can cherrypick them in next build.
About the powermenu options, you have to enable developer-settings, and there you will find an option to enable advanced reboot menu.
Finally with the build I will compile this saturday I will see what de can do to avoid the errors with the recovery, and also I will check the rotation.
yaymalaga said:
It's a shame that it has all this problems, but you have to remind that this is an alpha version , and for example you can find in gerrit patches for LTE that are in state of review, so if you want I can cherrypick them in next build.
About the powermenu options, you have to enable developer-settings, and there you will find an option to enable advanced reboot menu.
Finally with the build I will compile this saturday I will see what de can do to avoid the errors with the recovery, and also I will check the rotation.
Click to expand...
Click to collapse
Thank you. I totally understand it's a first build in early stages. I wasn't trying to beat you up...the problems could be in the source. I just wanted to let everyone know this shouldn't be expected to be a daily just yet, so they don't go in with high hopes and have them killed when all these things start going wrong. There are some builds that are definitely suitable as daily drivers as first-draft alpha builds, so it wouldn't be that surprising to find this one to be one of them, but unfortunately it's just not.
hp420 said:
Thank you. I totally understand it's a first build in early stages. I wasn't trying to beat you up...the problems could be in the source. I just wanted to let everyone know this shouldn't be expected to be a daily just yet, so they don't go in with high hopes and have them killed when all these things start going wrong. There are some builds that are definitely suitable as daily drivers as first-draft alpha builds, so it wouldn't be that surprising to find this one to be one of them, but unfortunately it's just not.
Click to expand...
Click to collapse
I must say that i'm running it without any problems at all.
Flashed successfully using TWRP.
Rotation is working fine.
So I would say go go go to all hesitating to update....
Thulin said:
I must say that i'm running it without any problems at all.
Flashed successfully using TWRP.
Rotation is working fine.
So I would say go go go to all hesitating to update....
Click to expand...
Click to collapse
Can you give us some screenshots please
Thulin said:
I must say that i'm running it without any problems at all.
Flashed successfully using TWRP.
Rotation is working fine.
So I would say go go go to all hesitating to update....
Click to expand...
Click to collapse
That's good to hear...would you please tell us what version of twrp you used? I tried 2840 and got the symlink error. I reverted back to 2820 since that's the newest I had stored on my pc and it flashed.....but with all these bugs I listed. Maybe it's not flashing properly still???
I had native rotation on and it didn't wok, so I downloaded Ultimate Rotation Control ( https://play.google.com/store/apps/details?id=nl.fameit.rotate&hl=en ) which works fine for me on 5.0.1 factory image....it was missing several rotation options with this rom, and the only option that worked was manual, which consists of a notification widget and clicking the angle of rotation you want, in order to change it....and it locks to that position. Like I said, maybe it messed up flashing...it definitely had some real issues. I'll try again and report back
---------- Post added at 10:40 AM ---------- Previous post was at 10:34 AM ----------
SebiC98 said:
Can you give us some screenshots please
Click to expand...
Click to collapse
It's nearly 100% stock AOSP, from the looks of it. It doesn't have any options besides the reboot menu, that I know of.
SebiC98 said:
Can you give us some screenshots please
Click to expand...
Click to collapse
Sceenshots of what, it's pretty much just stock lollipop at the moment. Nothing to show off....
TWRP: 2.8.3.0 was used.....
any one try it in multirom??
is it work??
qzxi said:
any one try it in multirom??
is it work??
Click to expand...
Click to collapse
Yep, I use it to test the builds
Build 2 is up, see gerrit for changes!
yaymalaga said:
Build 2 is up, see gerrit for changes!
Click to expand...
Click to collapse
How's the performance of this? Does it still have the launcher redraws due to memory leak?
Cool, I'm still waiting for some new stuff from PA
Thanks mate That´s what i was waiting for
jer_ying_fd said:
How's the performance of this? Does it still have the launcher redraws due to memory leak?
Click to expand...
Click to collapse
It's almost the same as a clean aosp rom. They have fixed memory leaks, but I don't remeber anyone about the launcher.
This Rom is tested and working on MHA-L29C432 variant only! All others are untested and possibly unsupported!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello all together. Some of you may know me, some may not. I'm mostly active in the Galaxy S7/S7E forums and my Roms are pretty fine there. Since I've gotten the Mate 9 some months ago, many things happened why I couldn't make a Rom for our device. But finally I found the time to create a very basic Rom for you guys, hopefully you will have fun with it. Read the feature list beyond and let me know if that's what you expect!
I returned my Mate 9 if someone wants to continue this project please go ahead!
Rom Features:
- Based on latest L29C432B182 firmware
- Latest B182 kernel
- April security patch
- Prerooted with Phh Superuser
- Rom is fully deodexed!
- Busybox V1.26.2 is included
- Adblocker enabled by default
- Disabled force encryption (TWRP will read /data partition correctly)
- Disabled dm-verity (you will be able to modify /system partition)
- Slightly debloated
- More to come!
Bugs:
- Camera may not work on none L29C432 models
HOW-TO Install the Rom:
0. Make sure you have ticked OEM Unlock and USB Debugging on in Developer Settings!!!!
1. Make sure you have TWRP 3.1.0-0 installed from this thread here: TWRP Mate 9 Recovery Thread (this includes having an unlocked bootloader)
2. After you successfully installed the 3.1.0-0 recovery I'd recommend you to download the Rom and put it onto your external sd card (you will see soon why external)
3. Now it's time to make a backup of your current setup, since we will wipe the whole data partition in order to get rid of encryption
4. After you backed up, connect your phone to a PC. Power it off and hold Power+Volume Up+Volume Down together OR type in adb terminal: adb reboot recovery
5. When TWRP successfully booted up: Click on wipe, format data and type "yes"This will delete all your personal data!
6. Wait until it is finished then click reboot, reboot to recovery
7. Now it's time to install the Rom itself, so install the Rom and wait until it's finished
8. After flashing, hit reboot and wait until it's booted up
9. Congrats! You've successfully flashed my Rom on your device!
Downloads:
Download V1.1!
Saying thanks:
If you enjoy and appreciate my work, I would be very pleased if you hit thanks on this post here, then I'm a very happy guy! If you say you want to do more about it, you can donate me with paypal using this link:
PayPal
I already say thanks to all of you! :highfive:
Credits:
- SuperR for his great unpack kitchen
- Huawei for NOT RELEASING Kernel source code
- phhusson for his Superuser
- osm0sis for his Busybox installer
- and last but not least the great XDA community for making me better and greater each day!
XDA:DevDB Information
Huawei Mate 9 Rom, ROM for the Huawei Mate 9
Contributors
Tkkg1994
ROM OS Version: 7.x Nougat
ROM Firmware Required: TWRP recovery
Based On: Stock Based
Version Information
Status: Stable
Current Stable Version: V1.1
Stable Release Date: 2017-04-19
Created 2017-02-21
Last Updated 2017-04-18
Changelogs:
SHIELD-Rom V1.0:
- Initial release on XDA
SHIELD-Rom V1.1:
- Despite the fact this rom is EOL, here you have an update!
- Updated base to B182
- Includes April 5th security patch (enhanced one)
- Updated phh superuser to r310 (due to this, your boot animation will maybe be stock)
- Fixed GPS not working
- Camera needs to be tested
Reserved
That's mine
Reserved
I'll take anotherone
Reserved
Last one
Initial Release
First version of this rom is now officially online.
Here you go with the download link:
Download V1.0
Nice, our first rom. I'm working on a pre rooted KangVIP Slim for our device as well, you beat me to the punch
ajsmsg78 said:
Nice, our first rom. I'm working on a pre rooted KangVIP Slim for our device as well, you beat me to the punch
Click to expand...
Click to collapse
You could also use my rom as a base to start off your own
Happy to see you deal with Mate 9 after your marvelous ROM for Note7
Tkkg1994 said:
3. Now it's time to make a backup of your current setup, since we will wipe the whole data partition in order to get rid of encryption
Click to expand...
Click to collapse
If i make a backup of my stock Mate 9 with HiSuite on my PC, will i be able to recover my SMS after your ROM is installed ? Same questions for the apps settings since, for the moment, i cannot use Titanium Backup because my Mate 9 ain't rooted.
Thanks.
Tkkg1994 said:
You could also use my rom as a base to start off your own
Click to expand...
Click to collapse
Thanks. I have most of it finished but needed to fine tune a few things. Hopefully we can get these working on all variants.
C636 variant?
Sent from my MHA-L29 using Tapatalk
Wow, fisrt custom and great rom
will is work with Mha-L29C900Bxx?
Hi!!
Thanks for your great job.
L09 check?
Thanks
Future integration of Lon-l29c636?
samnahata said:
Future integration of Lon-l29c636?
Click to expand...
Click to collapse
+1 for that!
Waiting for owning this phone in several weeks. I still remember ur hulk kernel for S4.
Cheers
Enviado desde mi GT-I9505 mediante Tapatalk
MechanteMiette said:
Happy to see you deal with Mate 9 after your maverlous ROM for Note7
If i make a backup of my stock Mate 9 with HiSuite on my PC, will i be able to recover my SMS after your ROM is installed ? Same questions for the apps settings since, for the moment, i cannot use Titanium Backup because my Mate 9 ain't rooted.
Thanks.
Click to expand...
Click to collapse
Note 7 was awesome!!
I'm way too new to huawei to answer this as I haven't even used hisuite till now. Hopefully someone else can help you
DanXbix said:
C636 variant?
Sent from my MHA-L29 using Tapatalk
Click to expand...
Click to collapse
-Zork- said:
Wow, fisrt custom and great rom
will is work with Mha-L29C900Bxx?
Click to expand...
Click to collapse
DjBastard said:
Hi!!
Thanks for your great job.
L09 check?
Thanks
Click to expand...
Click to collapse
samnahata said:
Future integration of Lon-l29c636?
Click to expand...
Click to collapse
I need to work on multi device support or wait for other devs to port it to your device.
I based this rom on the version my phone has so..
Indha Lezzio said:
Waiting for owning this phone in several weeks. I still remember ur hulk kernel for S4.
Cheers
Enviado desde mi GT-I9505 mediante Tapatalk
Click to expand...
Click to collapse
Nice, yeah hulk was awesome but than the s4 just got too old for me that's why I left back than
Sent from my SuperMan powered SM-G930F
Tkkg1994 said:
Note 7 was awesome!!
I'm way too new to huawei to answer this as I haven't even used hisuite till now. Hopefully someone else can help you
I need to work on multi device support or wait for other devs to port it to your device.
I based this rom on the version my phone has so..
Nice, yeah hulk was awesome but than the s4 just got too old for me that's why I left back than
Sent from my SuperMan powered SM-G930F
Click to expand...
Click to collapse
I hope you work on multi device support as you are one of the first ones to get the ball rolling for mate 9 devices! Hoping you'll decide to roll the ball a little bit further to our devices now, ?! If you require files to aid you in this task, please feel free to ask ☺.
Sent from my LON-L29 using Tapatalk
Hi & thanks for your job, could you provide some screenshots ?
Thanks for your first custom rom. We hope for a kernel open source.
Can i flash in C432B138 or i have to update first to B156?
This is not my work. I just shared for you from original http://bbs.ydss.cn thread.
Ask developer on the original place (You can find it at the bottom of this article) if you have any questions.
I am not responsible if you brick your devices or other issues.
Please do some research if you have any concerns about features included in this ROM before flashing it!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Recommended:
Unlocked bootloader
Working TWRP
Skill in flashing
Flashing method:
Clean install with TWRP! Full wipe and factory reset.
Please, before flashing always back up your original system!!!
BUG:
Tell me if you found...
These are works of chinese developers, so these contains a lot of unuseful chinese apps.
But no problem, because these contains built-in SuperSU, so you can uninstall every unuseful things.
These are multilanguage hybrid ROMs without GAPPS
We got last update at the end of last year.
Now the new system has arrived!
Update #8.3.29
http://openrom-dl.flyme.cn/20536413/20180329/1522315963126/flyme_MI-MAX_ycjeson_6.8.3.29R-beta.zip
Changelog:
• System
Fix copy and paste problem
Fix the problem that the virtual buttons are not hidden in full-screen mode
• Settings
Fix Modifying WIFI password cannot call up input method
• Built in SuperSU
security patch is 2018-01-05
Android version updated from 6.x.x to 7.1.2
GOOD NEWS: YCJENSON's version become OFFICIAL!!! You can find weekly versions on the official site!!!
Screenshots:
Flyme 6 features
Origina threads: 木楼V5 and 快乐我期待
Nice will try
So did anyone tried this rom?! Is it usable??!
khaled7mailru said:
So did anyone tried this rom?! Is it usable??!
Click to expand...
Click to collapse
i try for hydrogen everything it's ok but cannot open mobile network
i 'm from thailand
may be another country it's work
Any hydrogen build?
6ebronze said:
i try for hydrogen everything it's ok but cannot open mobile network
i 'm from thailand
may be another country it's work
Click to expand...
Click to collapse
Ok thx. Is it fast?? Stable?? No lags?
khaled7mailru said:
So did anyone tried this rom?! Is it usable??!
Click to expand...
Click to collapse
Of course I was tried before posting.
Everything is working on it. Stable rom.
6ebronze said:
i try for hydrogen everything it's ok but cannot open mobile network
i 'm from thailand
may be another country it's work
Click to expand...
Click to collapse
These roms created only for helium.
If you want, I upload hydrogen version for you.
Thank you Sir, plz tell me gapps included in this rom? And how is the battery usage compared to miui?
JulianJenner said:
These roms created only for helium.
If you want, I upload hydrogen version for you.
Click to expand...
Click to collapse
thank you if it's can
i try another rom in m.rom.7to.cn
but every rom from flyme i cannot open mobile network
@Hydrogen
khaled7mailru said:
Thank you Sir, plz tell me gapps included in this rom? And how is the battery usage compared to miui?
Click to expand...
Click to collapse
Battery consumption for me on miui
a.m. 6 to p.m. 2 --> 100% to 75%.
Battery consumption on flyme
a.m. 6 to p.m. 2 --> 100% to 80%.
I think it is same.
No. It is not contains built in GAPPS. I used Google Installer apk, successfully.
6ebronze said:
thank you if it's can
i try another rom in m.rom.7to.cn
but every rom from flyme i cannot open mobile network
@Hydrogen
Click to expand...
Click to collapse
Hmmm...maybe your srvice provider...or incorrect baseband...
It is Hydrogen thread: http://bbs.ydss.cn/thread-992258-1-1.html...I am downloading now for you...I think it will be done 6-8 hours later...
HYDROGEN 7.7.21 Flyme 6.0
Everyting works good(helium), except alarm clock.
If someone can, please, fix it
jokai_sor said:
Everyting works good(helium), except alarm clock. If someone can, please, fix it
Click to expand...
Click to collapse
Confirmed. Alarm clock causes continous reboot.
Pasted it to BUG section on first thread.
I inform the developer about this BUG.
Nice to read that flyme works well on our max! Did you try any other alarm android application, or all alarm apps are not working??! And is this rom fast as other custom roms on our max?? How about games, heavy games?? Camera?? Plz answer who can, really want to use flyme os)))
khaled7mailru said:
Nice to read that flyme works well on our max! Did you try any other alarm android application, or all alarm apps are not working??! And is this rom fast as other custom roms on our max?? How about games, heavy games?? Camera?? Plz answer who can, really want to use flyme os)))
Click to expand...
Click to collapse
I was tried Alarmy from Play Store, and the situation same, phone reboot.
No, I think it is not faster. It is same...
Videorecording of own Camera does not work. A better cam, and HD Camera also does not work.
I never play game on my phone, sorry, I do not know.
This rom is fast and fluid.. Better than miui 9 I tested on redmi note 4... Plz try to translate everything in English... This rom can become a daily driver... I think.. As i dont use alarm
---------- Post added at 06:39 AM ---------- Previous post was at 06:37 AM ----------
JulianJenner said:
Battery consumption for me on miui
a.m. 6 to p.m. 2 --> 100% to 75%.
Battery consumption on flyme
a.m. 6 to p.m. 2 --> 100% to 80%.
I think it is same.
No. It is not contains built in GAPPS. I used Google Installer apk, successfully.
Click to expand...
Click to collapse
Wow... What kind of sot.. Do u normally achieve? On any other rom
rsrohit315 said:
This rom is fast and fluid.. Better than miui 9 I tested on redmi note 4... Plz try to translate everything in English... This rom can become a daily driver... I think.. As i dont use alarm
---------- Post added at 06:39 AM ---------- Previous post was at 06:37 AM ----------
Wow... What kind of sot.. Do u normally achieve? On any other rom
Click to expand...
Click to collapse
Didn't you never use camera / video?
Sorry I did not checked SOT time.. and I am on MIUI again.
NEW 7.7.31 build from Happy® : Developer 快乐我期待 build 7.7.31
Alarm clock bug was remained...
Built in Camera - videorecording bug was remained
NEW 7.8.4R build from Happy® : Download Developer 快乐我期待 build 7.8.4R
Happy's changelog:
* Synchronization: Flyme6 adaptation code to 6.7.8.4R
* Alarm: Resume the alarm reset
* Butler: Optimize the virus killing
* Housekeeper: cell phone thin
* Butler: security scan code scan two-dimensional code after the distortion of the problem
* System: Optimize the Flyme system frame layer, smooth and smooth
* System: Optimize extended battery life
UPDATE: I've tested, so Alarm Clock issue have solved.
Hi :laugh:
This is unofficial Miui 10 for Xiaomi Mi Note Virgo LTE ( not pro )
Xiaomi stop update Mi Note and latest official is miui 9 :crying:
This rom is port from MI3/MI4 cancro but all functions Mi Note is fully working ( HIFI audio dual sim and more) :highfive:
The first boot may take from 15 - 20 min, also wait patiently :angel:
Language only English and chinese
I will try with time, port language global version
If you have old twrp Please update TWRP to the latest available version.(at the moment 3.2.3.0)
Screenshot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DOWNLOAD
TWRP:
https://androidfilehost.com/?fid=11410963190603882959
--------------------------------------------------------------------------------------------------
Rom:
https://androidfilehost.com/?fid=11410963190603904906
--------------------------------------------------------------------------------------------------
If you want Magisk and root please install magisk zip
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
For Google services please install gapps from open gapps (i tested variant pico and working fine, if you have bug after login account google please reboot device.
https://opengapps.org/
Dolby Atmos
https://androidfilehost.com/?fid=11410963190603842085
Rom Info
Miui Version - 10.1.1.0(MXDCNFI)
HIFI Audio fully working (Original DAC)
Android Version - Marshmallow 6.0.1 API 23
Kernel Version 3.4.0
Possible to port Cancro AEX Extended Rom over to Virgo too ?
Thanks for Sharing!
takagen said:
Possible to port Cancro AEX Extended Rom over to Virgo too ?
Click to expand...
Click to collapse
Hi, Yes, this is possible.Cancro is very similar like virgo.I think aosp porting should be easier than miui.
The same rom is working but you must porting a few driver's like sim, audio, camera etc.
I will try to do something with this, but i see in thread about this rom from cancro link is dead,so i need mirror.
Regards :good:
INDUSAMEERA said:
Thanks for Sharing!
Click to expand...
Click to collapse
You wlecome :highfive:
Does this helps ? Cancro rom
https://androidfilehost.com/?fid=1322778262904006523
cant install on my virgo. error with signall 11 . help?
takagen said:
Does this helps ? Cancro rom
https://androidfilehost.com/?fid=1322778262904006523
Click to expand...
Click to collapse
Yes I needed this thanks you :good:
Rom is run on Xiaomi Mi Note virgo but no working sim , key navigation , brightness sensor and maybe something else i try port driver from linageos.
But I use xiaomi my dayli phone I do not always have time to do something on the phone, so I can spend some time :angel:
When i will succeed all fixes will be made, i share fully work rom on the new topic
Sorry for my English
Screen from this rom on Mi Note
Vilokio said:
cant install on my virgo. error with signall 11 . help?
Click to expand...
Click to collapse
Hi , what Twrp version you use ? and you have new merge partition or old partition ?
old is Miui 7 Android 4.4
new merge partition Miui 7 Marshmallow 6.0 or latest miui 8 or 9 update
Please info about this and try install rom on twrp from thread and after failed install please reboot to recovery and try again but no wipe.:good:
SebastianWijatyk said:
When i will succeed all fixes will be made, i share fully work rom on the new topic
Click to expand...
Click to collapse
Thanks man. No worries, take all the time you need.
(there's also daily Mokee Oreo build if their drivers are compatible)
interesting, will try this rom, but it's so big, that size is not sexy
Thank you for bringing Miui 10 to Virgo.
Does the sound panel work? timer? I also ported it using mi3 / 4. In my firmware they do not work. Only there are all languages ...
LanoS_cool said:
Does the sound panel work? timer? I also ported it using mi3 / 4. In my firmware they do not work. Only there are all languages ...
Click to expand...
Click to collapse
I think is work:silly:.Currently my phone has damaged the motherboard I have ordered a new one so it's hard for me to answer 100%, but if you needed you can take some scripts or files from this compilation :highfive:
SebastianWijatyk said:
I think is work:silly:.Currently my phone has damaged the motherboard I have ordered a new one so it's hard for me to answer 100%, but if you needed you can take some scripts or files from this compilation :highfive:
Click to expand...
Click to collapse
Need a script for sound panel. Not work silent mod in sound panel. In status bar is ok
UPDATE
This rom version is a port based on first stable version miui 10.1.1
Face unlock is working very fast :good:
Fix some bugs
Crack MIUI themes
All Miui apps upgrade to the latest official version
All features from previous version 8.9.4 like xposed or magisk is Integrated
Separated google services (because not everyone uses it)
If you want google services please install gapps.
https://androidfilehost.com/?fid=11410963190603842086
Rom it's optimized, run fast and i think Stable
Because this is a stable based version I recommend wipe system and data but it is not necessary
Dolby atmos for Miui
https://androidfilehost.com/?fid=11410963190603842085
ROM Download
https://androidfilehost.com/?fid=11410963190603842087
LanoS_cool said:
Need a script for sound panel. Not work silent mod in sound panel. In status bar is ok
Click to expand...
Click to collapse
I think do you maybe must serach in MiuisystemUI.apk and correct or replece some files in xml folder
SebastianWijatyk said:
I think do you maybe must serach in MiuisystemUI.apk and correct or replece some files in xml folder
Click to expand...
Click to collapse
In your ROM sound bar works identically, I also have.:crying:
And what to do with it I don't know
When I try to flash it (using new TWRP) than after reboot it boot to TWRP instead system. When I try to reboot it again it boot to TWRP again. What I am doing wrong? Thanks
matonka007 said:
What I am doing wrong?
Click to expand...
Click to collapse
Instal other twrp.img and reinstall ROM
Napiszę po polsku, żeby było łatwiej zrozumieć. Dzięki w ogóle za rom, uratowałeś mi dupę tym ale zauważyłem, że nawet na najniższym poziomie głośności dzwonka dałoby radę obudzić nim zmarłego. Też tak masz czy tylko u mnie? Jakiś fix do tego planujesz zrobić? Czy rzucasz ten rom? // I'll write in polish so it's easier to explain problem. Firstly thank you for rom, you saved my ass but I noticed that even with lowest ringtone volume you could wake up someone dead. Does it work for you or only for me? Will there be any fix? Or you want to leave this rom?
hello, tested your ROM, battery life is very good after unninstalling lots of unnecesarry apps, could you please port the global ROM instead? This chinese version sends too much analytics data to china and has a lot of bloat people outside china don't use. Other than that, good port, no issues whatsoever.
newbie
Hey, I'm new to this. I have a few questions
is the mi note pro same as mi note and can this rom be used for non pro mi note?
can someone provide me step by step guide to root and flash this rom as I'm a total newb at this (never done any) and don't want to screw or break the phone
thannks in advance