Hello
I tried to install different Rom from different sites but every time I apply the update from the Recovery menu, the installation hangs for error Error in / tmp / sideload / ... (status 0)
I also tried to format the SD card but the error persists ... I also installed cwm ...
I seem to have tried one of these 2 ROM:
...needrom.com/mobile/galaxy-ace-s5830
...needrom.com/mobile/s5830-galaxy-ace
Currently there is Android 2.3.6 and if I install updates, the cel says it is updated
you must install cwm and then at cwm install zip from sdcard and not aplly update
tethering
graineeg said:
you must install cwm and then at cwm install zip from sdcard and not aplly update
Click to expand...
Click to collapse
Now it's works: Now there's cyanogenmod (ANDROID 4.2.1).
The only thing that doesn't works is tethering (and wifi hotspot).
I have vodafone...
Thanks
Stefano
I download this roms
-Resurrection Remix V.5.4.4
And also download this.
V.5.7 Remix -Resurrection
Download the gapps and did the normal procedure for installation.
what happens is that after attempting to install the ROM. I get this error.
(Enclose all text that I no longer like spending a capture)
Installing: Storage - sd card1-Resurrecction Remix_Lp_v.5.4.4
finding update package
opening update
installing Update
Detected Fylesystem ext4 for /Dev/block/plataform/msm_sdcc.l/by-name/system
mount: Failed to mount /dev/block/plataform/msm_sdcc.l/by-name/system at / system: Invalid argument
unmouunt of / system failed: no such volume
patching system unconditionally
E: error in /storage/sdcard1/REsurrectionRemix_Lp_v5.4.4-20150511
(Status 0)
instalation aborted
This is me 2 rom mentioned.
after that the micro sd is disabled and must be reintroduced to recognize it the team
Try installing the ROM CM By beto, and is not installed not simply do nothing and pass the phone around two hours in the instalalcion and never proceeded
Now my phone does not pass the logo of motorola
help-'
Did you perform a „factory reset” wipe? Changing ROMs kind of requires you to - a factory reset wipes the old sd-ext, and you still have it.
And are you sure you downloaded the right ROM? I can't access the RR site now, but they don't have ROMs for Thea.
What phone do you have, actually?
FCorvin said:
Did you perform a „factory reset” wipe? Changing ROMs kind of requires you to - a factory reset wipes the old sd-ext, and you still have it.
And are you sure you downloaded the right ROM? I can't access the RR site now, but they don't have ROMs for Thea.
What phone do you have, actually?
Click to expand...
Click to collapse
I have xt1045 4g
I've done all the procedures to install the rom .
but gave those mistakes.
try putting on a rom 5.1 stock xt1045 according to what I found here on xda but I do not install it .
the phone did not stay at the logo and not as most do.
Then you need to flash this ROM: CM Peregrine
Or this one: RR Peregrine
See the ROM's discussion thread here.
You are also on the wrong part of this forum - you'll get better advice here: Moto G
iam currently using lenovo a7000 turbo on marshmallow and midway on rooting process as i installed twrp2.8.7 through fastboot....but i cannot use usb otg to make backup. so i want to update twrp to 3.0.2 . how can i update twrp .plz help .iam a beginner and i fear bricking my phone..plz help:crying::crying::crying:
tips:
-download the twrp version that you like in .img format
-there will be an alternative option in the twrp to install image/zip choose image(by default its zip)
-select the recovery that u downloaded and select recovery option when asking which to mount
-thats it.
hit thanks if i helped got any queries,dont hesitate i will help you if i know
cheers,happy flashing
aswinp222 said:
tips:
-download the twrp version that you like in .img format
-there will be an alternative option in the twrp to install image/zip choose image(by default its zip)
-select the recovery that u downloaded and select recovery option when asking which to mount
-thats it.
hit thanks if i helped got any queries,dont hesitate i will help you if i know
cheers,happy flashing
Click to expand...
Click to collapse
will any twrp image work
Yea,sure.it will show error if it's corrupted don't worry
When I put TWRP.img on my sdcard and boot into TWRP. it doesn't show up in TWRP.
If you had problems (like myself) with installing custom roms via twrp where the system would stuck in a bootloop and the recovery would return "No OS Installed" error, here's the solution to how to fix it:
1. Enter TWRP
2. Go to Wipe - Format Data
3. Restart recovery
4. Copy the rom to internal storage and install custom rom
Enjoy!
vulgaran said:
If you had problems (like myself) with installing custom roms via twrp where the system would stuck in a bootloop and the recovery would return "No OS Installed" error, here's the solution to how to fix it:
1. Enter TWRP
2. Go to Wipe - Format Data
3. Restart recovery
4. Copy the rom to sd card and install custom rom
Enjoy!
Click to expand...
Click to collapse
Thanks for the useful info. :highfive:
evanB70 said:
Thanks for the useful info. :highfive:
Click to expand...
Click to collapse
Whoops, forgot it doesn't have the sd card slot I've edited the first post.
Apparently, when you change rom type (for example, from official stable to xiaomi.eu weekly), you have to do this complete device wipe. For updating to a new version only wiping dalvik and cache should do.
not work on me
Thanks but didn't work for me either. After following your instructions, the phone booted into TWRP again. It no longer says there's no OS, but it won't boot. Just stalls into boot animation for a while and then goes into twrp recovery... Bummer!
Hello, help would be amazing as this is my 2nd day trying to root my xPeria XZ Premium!
I've finally flashed twrp , I'm trying to install this rom:
https://forum.xda-developers.com/xz-premium/development/kernel-sony-xz-premium-5-2018-t3784669
But I'm getting stuck when trying to install magisk, OR move any zip files from my SD card to my Internal Storage.
Could anyone guide me through how to resolve this? :crying:
Have unlocked boot loader?
Need to format data first
xStatiZx said:
Hello, help would be amazing as this is my 2nd day trying to root my xPeria XZ Premium!
I've finally flashed twrp , I'm trying to install this rom:
https://forum.xda-developers.com/xz-premium/development/kernel-sony-xz-premium-5-2018-t3784669
But I'm getting stuck when trying to install magisk, OR move any zip files from my SD card to my Internal Storage.
Could anyone guide me through how to resolve this? :crying:
Click to expand...
Click to collapse
Hey my dude follow these steps, in twrp select wipe->format data (You'll lose all your files) now try flash the rom, you should find a custom kernel for your device as well and install it after the rom. If the Kernel doesnt install magisk now would be a good time to do it :highfive:
Matthewwwww1998 said:
Hey my dude follow these steps, in twrp select wipe->format data (You'll lose all your files) now try flash the rom, you should find a custom kernel for your device as well and install it after the rom. If the Kernel doesnt install magisk now would be a good time to do it :highfive:
Click to expand...
Click to collapse
This isn't necessary. Just extract boot.img from whatever rom.zip you're using, flash that in recovery, reboot to recovery again and magisk should install.
murph187 said:
This isn't necessary. Just extract boot.img from whatever rom.zip you're using, flash that in recovery, reboot to recovery again and magisk should install.
Click to expand...
Click to collapse
You're a GOD. Thank You!!!!!
updater process ended with error: 1
I was able to install magisk but after that if i try to install nethunter I get this same error. I am using redmi 4(santoni). have installed lineage OS 15.1
Can someone please help me?
logs
I had similar error shown below while installing a custom ROM:
Error applying update: 7 (ErrorCode:: kInstallDeviceOpenError )Updater process ended with ERROR: 1 Error installing zip file
Solved by using slightly older version of TWRP
i try and didnt work how to extract boot image in steps ??
magicstep said:
I had similar error shown below while installing a custom ROM:
Error applying update: 7 (ErrorCode:: kInstallDeviceOpenError )Updater process ended with ERROR: 1 Error installing zip file
Solved by using slightly older version of TWRP
Click to expand...
Click to collapse
which version you use
murph187 said:
This isn't necessary. Just extract boot.img from whatever rom.zip you're using, flash that in recovery, reboot to recovery again and magisk should install.
Click to expand...
Click to collapse
Hi, which option may i have to choose? there are 4 options
magicstep said:
I had similar error shown below while installing a custom ROM:
Error applying update: 7 (ErrorCode:: kInstallDeviceOpenError )Updater process ended with ERROR: 1 Error installing zip file
Solved by using slightly older version of TWRP
Click to expand...
Click to collapse
3.2.2 worked for me.
In my case unmounting all the partitions fixed it for me, the boot.img method didn't work.
magicstep said:
I had similar error shown below while installing a custom ROM:
Error applying update: 7 (ErrorCode:: kInstallDeviceOpenError )Updater process ended with ERROR: 1 Error installing zip file
Solved by using slightly older version of TWRP
Click to expand...
Click to collapse
I had flashed new version on firmware but forgot to update TWRP recovery that is why I was getting this error. I updated TWRP recovery. also flashed boot.img image then I was able to fix this issue.
guys please help me i have xiaomi mi a2 lite whit twrp 3.5.0_9 installed and unlocked bootloader i downloaded android 11 rom link: https://forum.xda-developers.com/t/rom-11-0-daisy-aosp-11-0.4167961/. When i go to recovery mode i flash the rom and appears this error: Updater process ended whit error: 1 to flash additional zips please reboot recovery to switch to the updated slots. Error installing zip file rom.zip. please help me.
THANKS
samyxy said:
guys please help me i have xiaomi mi a2 lite whit twrp 3.5.0_9 installed and unlocked bootloader i downloaded android 11 rom link: https://forum.xda-developers.com/t/rom-11-0-daisy-aosp-11-0.4167961/. When i go to recovery mode i flash the rom and appears this error: Updater process ended whit error: 1 to flash additional zips please reboot recovery to switch to the updated slots. Error installing zip file rom.zip. please help me.
THANKS
Click to expand...
Click to collapse
I was having the same issue... After hours of research I finely managed to fix it. Try the following:
1 - Install TWRP (I also had the 3.5.0_9 version).
2 - Format data and wipe all the advanced options possible.
3 - Download the program "payload_dumper-win64".
3.1 - Following the payload dumper instructions, I've copied the payload.bin from my custom ROM to the payload_input folder.
3.2 - Execute payload_dumper.exe and wait, a lot!
3.3 - Copy the resulted files (boot.img, system.img, vendor.img) in to the phone.
4 - In TWRP, go to install, select from images, and, one by one, install the images you've just copied.
4.1 - Note that during the install process, you will have to select the correct "slots" to flash the images. In my case, there where to options for system and vendor. I've chosen the "System Image" and "Vendor Image" option.
5 - Restart.
That's it! I didn't had to change slots nor wipe data after the installation... I don't know if this was the correct approach, but after many tries this is what worked for me
Sorry about my bad english...
Sometimes it is caused due to corrupted file. While transferring file through MTP it is likely to corrupt large files. I had the same problem. Then I tried copying file while in TWRP (sure it is also MTP) and it worked.
PendiukG said:
I was having the same issue... After hours of research I finely managed to fix it. Try the following:
1 - Install TWRP (I also had the 3.5.0_9 version).
2 - Format data and wipe all the advanced options possible.
3 - Download the program "payload_dumper-win64".
3.1 - Following the payload dumper instructions, I've copied the payload.bin from my custom ROM to the payload_input folder.
3.2 - Execute payload_dumper.exe and wait, a lot!
3.3 - Copy the resulted files (boot.img, system.img, vendor.img) in to the phone.
4 - In TWRP, go to install, select from images, and, one by one, install the images you've just copied.
4.1 - Note that during the install process, you will have to select the correct "slots" to flash the images. In my case, there where to options for system and vendor. I've chosen the "System Image" and "Vendor Image" option.
5 - Restart.
That's it! I didn't had to change slots nor wipe data after the installation... I don't know if this was the correct approach, but after many tries this is what worked for me
Sorry about my bad english...
Click to expand...
Click to collapse
It's legit procedure. Also you don't need to manage slots here, caz recovery automatically does that for you.
Hello guys, i'm from Russia, sorry for my bad English. I using Poco X3 Pro, and i have some troubles. I wanted to install custom firmware. First ROM
delivered successfully, unlike the second. After clearing all sections except sd cart and otg, I tried to install the original MIUI build, but it didn't work. I downloaded the original MIUI, but still. When installing, it says: "Update process ended with ERROR: 1" The methods from the top didn't help, please help!
Sushanthn94 said:
updater process ended with error: 1
I was able to install magisk but after that if i try to install nethunter I get this same error. I am using redmi 4(santoni). have installed lineage OS 15.1
Can someone please help me?
logs
Click to expand...
Click to collapse
Kali Nethunter on redmi 4x (santoni) is updated here:
Releases · Neternels/android_kernel_xiaomi_msm8937
Redmi 4X (santoni) NetHunter Kernel. Contribute to Neternels/android_kernel_xiaomi_msm8937 development by creating an account on GitHub.
github.com
Follow it and flash firmwares (if needed).