Database Develop

[Q] Navbar Refuses to Hide on Lockscreen (WidgetLocker)

Hi,
I am currently using WidgetLocker as my default lockscreen and it is working well, stock lockscreen isn't showing at all etc., but one MAJOR drawback. I can't get the Navbar (softkeys?) to minimize on the lockscreen. Its probably just an easy fix and I'm somehow missing it, any ideas?

Have you disabled it in the settings? If I remember correctly, there's 2 places in the settings to do that.... which is weird.
Try:
Settings > Buttons & Gestures
Also try:
Settings > Look & Feel
As for the Nav bar/softkeys .... I dunno.
Good Luck.

Temp Fix.
Krsmqn said:
Have you disabled it in the settings? If I remember correctly, there's 2 places in the settings to do that.... which is weird.
Try:
Settings > Buttons & Gestures
Also try:
Settings > Look & Feel
As for the Nav bar/softkeys .... I dunno.
Good Luck.
Click to expand...
Click to collapse
I found a temporary fix. For some reason if you select allow home on the lock screen it minimizes on the lockscreen...
If you swipe up from the bottom though, you can go home without unlocking.

[Q] Remove navigation bar in Paranoid Android 3.15

It seems there's a nonav fix that can be installed via CWM somewhere, but I wasn't able t locate the file.
Edit: Right then, never mind.
It's settings => hybrid properties => swipe right => interface => set bav. bar to 0%.

dude1001 said:
It seems there's a nonav fix that can be installed via CWM somewhere, but I wasn't able t locate the file.
Edit: Right then, never mind.
It's settings => hybrid properties => swipe right => interface => set bav. bar to 0%.
Click to expand...
Click to collapse
hello, im using the PACman rom in tablet mode but the navigation bar is there, is there any way to remove the navigation buttons but keep the status bar?

Cuzmanbro said:
hello, im using the PACman rom in tablet mode but the navigation bar is there, is there any way to remove the navigation buttons but keep the status bar?
Click to expand...
Click to collapse
The person you quoted has written the answer as well
#Galaxtus#

Galaxtus said:
The person you quoted has written the answer as well
#Galaxtus#
Click to expand...
Click to collapse
Yeah, but if ur in tablet mode, you cant change the nav bar size

I developed an app that can do this in stock rom and I just added Paranoid Android support. Would be nice if someone could try it and confirm that it works or report bugs: GMD Hide Soft Keys.
Benefits for PA:
1) you can turn on Notification with switch control to hide/show navigation bar from anywhere.
2) Quick NavBar can be displayed with swipe from bottom (similar way to Pie)
3) Quick NavBar has button to toggle Extended Mode (full screen).
More features coming :fingers-crossed:.

Cuzmanbro said:
hello, im using the PACman rom in tablet mode but the navigation bar is there, is there any way to remove the navigation buttons but keep the status bar?
Click to expand...
Click to collapse
There is no navigation bar in the tablet mode, those are just the navigation keys in the Tablet mode on the common status cum navigation bar, the tablet mode makes your phone into a tablet and as tablets don't have a capacitive back key like the phone, tablet interfaces will have those keys and you can't get them away unless there is some MOD for it which you can search in themes and apps forum.

Missing application options with P10 off-screen navigation

Hi all,
I have couple of apps that shows its application options on the navigation bar (on screen). But when I enable P10's off screen navigation option, I no longer can access this options menu. Is there a way to do this with off screen navigation ?
remove spaces and use the link to see screenshot image
https : //ibb.co/fMtaTR
Thanks,
Harshana

Is there a way to have flashlight shortcut on the lock screen? Ideally by button press.

Is there a way to have flashlight shortcut on the lock screen? Ideally by button press.
One of the most used function is missing on this phone

Draw a "V" on the screen whilst it's turned off and the flashlight will turn on/off

dnaswitcher said:
Draw a "V" on the screen whilst it's turned off and the flashlight will turn on/off
Click to expand...
Click to collapse
This doesn't work on X5 pro that I have

Did you activate the feature as described on the Oppo-site that appears after you click on my link?
It works on mine after doing so:
Go to [Settings] > [Gesture & Motion] > [Screen-off Gestures] > toggle to enable or disable [Screen-off Gestures].
You can also have more Screen-off Gestures by tapping [Add a Screen-off Gesture].
There are 7 more gestures to choose from.

dnaswitcher said:
Did you activate the feature as described on the Oppo-site that appears after you click on my link?
It works on mine after doing so:
Go to [Settings] > [Gesture & Motion] > [Screen-off Gestures] > toggle to enable or disable [Screen-off Gestures].
You can also have more Screen-off Gestures by tapping [Add a Screen-off Gesture].
There are 7 more gestures to choose from.
Click to expand...
Click to collapse
Working now. Many thanks

Themes / Apps / Mods [App] Fix of buggy proximity sensor - Locking screen from being pressed during phone call

Note: app compatible with any phone with 1080x2400 screen or lower. Probably higher too, try it. Also it's impossible to make such block when talking in messengers (more precisely, it's difficult). App won't work without gapps, rare case.
Instead of classic reliable optical sensor we have sucky ultrasonic one.
Sometimes it does not turn off the screen while phone call and something is pressed with ear or cheek up to dropping call.
Popular workaround is app "Call Proximity Sensor Fix" which automatically turns off the screen. Or you can press the power button immediately after the answer.
But IMHO this is inconvenient because if you need to look at something on the screen it will not turn on by itself which is so familiar.
My simple application makes screen insensitive to taps. And unlike analogs soft buttons and status bar are blocked too (but not gestures).
On screen will be translucent button that disables lock if you need to use the phone:
– Long tap on button - unlock (button will turn green)
– Short tap when unlocked - lock again
– Long tap when unlocked - remove button at all so as not to interfere with e.g. for entering text
When second call comes in screen will automatically unlock so you can easily answer or hang up. Then it blocks again.
When manually launching the application there will be a question whether to enable 4 seconds delay for an outgoing call. So you able to choose SIM card.
Made by powerful Tasker, the project was exported as standalone application via App Factory. Implemented via scenes with new full-screen blocking type.
Location of button adapted for default AOSP / Google Dialer. It can be misplaced for third-party dialers and / or interface scale. It's impossible to cover all possible variants. So if it really bothers you, install Tasker and project below. Then change coordinates of the buttons.
Installation
Follow manual carefully, otherwise nothing will work.
Application is safe and doesn't have internet access.
1. Download APK below this post
2. Install it via file manager and launch
3. Answer the question about delay, decision can be changed later by launching app again
4. Open Settings > Apps & Notifications > In-Call Screen Lock
5. In "Notifications" turn off them all completely, otherwise they will be annoy you
6. In "Permissions" enable everything: Contacts, Call List and Phone
7. MIUI: right there in application settings enable "Autostart"
8. MIUI: and in "Background" select "No restrictions"
9. Custom: Settings > Apps & Notifications > Advanced > Special app access > Battery optimization > All apps > In-Call Screen Lock > Don't optimize
10. Custom: Settings > Apps & Notifications > Advanced > Special app access > Display over other apps > In-Call Screen Lock > Allow display over other apps
11. MIUI: Settings > Privacy > Management > Special app access > Display over other apps > In-Call Screen Lock > Allow display over other apps
12. Settings > [MIUI: Advanced settings] > Accessibility > In-Call Screen Lock > enable "Use In-Call Screen Lock"
If you using Tasker
1. Download ZIP archive below this post
2. Extract file from it to phone/Tasker/projects
3. Tap on "House" icon at the bottom > Import Project > In-Call_Screen_Lock
4. If you don't need a delay on an outgoing call: delete / disable action #3 ("Wait") from the "In-Call Lock Start" task
5. Custom: Settings > Apps & Notifications > Advanced > Special app access > Display over other apps > Tasker > Allow display over other apps
6. MIUI: Settings > Privacy > Management > Special app access > Display over other apps > Tasker > Allow display over other apps
7. Settings > [MIUI: Advanced settings] > Accessibility > Tasker > enable "Use Tasker"
UPD: files updated, fixed small bug.

does this affect battery life

shakeelbirmani said:
does this affect battery life
Click to expand...
Click to collapse
No.

Tested now on my RN10-pro... works just fine! Thank you!

Tested without gapps and it didn't work. I use the standard phone app from Arrow OS. I do all settings from your instruction.
There was no 4 seconds query of the sim card. The and no lock screen button.

Social_Work said:
Tested without gapps and it didn't work.
Click to expand...
Click to collapse
Unfortunately, APK's exported by Tasker always have dependencies from GMS no matter actions it should perform. Sorry, I can't fix that.

I reinstal Arrow with Gapps and Install tasker. IT works great! Thx a lot! Now ist this Phone uesable.

Great application. Tested it via Tasker and works. Thank you so much!
Small question, if you do use the power button while in call to lock the screen and you unlock it again and then use your unlock button, it unlocks but the button disappears so you can't lock it again. How do I get the button back then?

Note: sensors are automatically calibrated and sometimes this creates a problem.
To cleanup and recalibrate the sensors, all you need to do is this:
Bash:
# dd if=/dev/block/by-name/persistbak of=/dev/block/by-name/persist conv=notrunc
For me that solved everything on official MIUI V13.0.12.0 (and previously on V12.5.9.0).

Amazfit User said:
if you do use the power button while in call to lock the screen and you unlock it again and then use your unlock button, it unlocks but the button disappears so you can't lock it again
Click to expand...
Click to collapse
That's strange. I tested as you wrote and button visible, nothing in profile logic should block its appearing. I used clean Android 11 and AOSP dialer.
As possible workaround please test this: Tasker > tab "Scenes" > Lock On > tap on lock icon > tab "Long tap" > action "Show Scene" > tick "Block Overlay+"
Zibri said:
sensors are automatically calibrated and sometimes this creates a problem
Click to expand...
Click to collapse
That's legit for classic sensor, but I'm doubt, that ultrasonic store its calibration data there (if even have it). "Sensor" unreliable just by design.

Bonoboo said:
That's strange. I tested as you wrote and button visible, nothing in profile logic should block its appearing. I used clean Android 11 and AOSP dialer.
As possible workaround please test this: Tasker > tab "Scenes" > Lock On > tap on lock icon > tab "Long tap" > action "Show Scene" > tick "Block Overlay+"
That's legit for classic sensor, but I'm doubt, that ultrasonic store its calibration data there (if even have it). "Sensor" unreliable just by design.
Click to expand...
Click to collapse
Thanks for the information. Tested it and ticking the block overlay + fixes the issue. I guess it's because even though I'm able to tap the icon and other call icons the phone is still locked. I guess the overlay + makes sure that the lock off scene is still visible on the "lock" screen. I'm on Samsung One UI 4.1 with the native Google dialer.
Thanks for the help.

Bonoboo said:
That's strange. I tested as you wrote and button visible, nothing in profile logic should block its appearing. I used clean Android 11 and AOSP dialer.
As possible workaround please test this: Tasker > tab "Scenes" > Lock On > tap on lock icon > tab "Long tap" > action "Show Scene" > tick "Block Overlay+"
That's legit for classic sensor, but I'm doubt, that ultrasonic store its calibration data there (if even have it). "Sensor" unreliable just by design.
Click to expand...
Click to collapse
ultrasonic sensor can be even manually calibrated and the calibration is indeed stored and used.
Also: the ultrasonic sensor works in software, relying also on the position and angle of the phone.
If that measurement fails or is inaccurate, everything is ruined.
Trust me: try to do a fastboot flash of V13.0.12.0 then reset that partition as I said.
Then you can tell me if it improves or not.
For me now it works perfect both in DUO both in the stock dialer and messenger.

You can find the latest stock firmwares here:
Codes and study of the Redmi Note 10 PRO (SWEET) and some findings
code name 76937 com.miui.powerkeeper.cloudcontrol.CloudUpdateReceiver 8437625 com.miui.powerkeeper.thermalconfig.ThermalConfigReceiver 37263 com.miui.powerkeeper.ui.framerate.FrameRateSecretCodeReceiver 2877...
forum.xda-developers.com