Database Develop

[FIX] FastBoot Mode without using a Factory Cable. [TWRP BootLoop]

Recently while updating my Kindle Fire HD 7, my device went into a bootloop where it would boot into TWRP and the TWRP logo kept blinking, I live at a place where it is impossible to procure a factory cable. After numerous failed attempts on making one myself i gave up on factory cables. I however wasn't satisfied enough by my failures so i went the hard way and out of curiosity connected my Kindle to my Laptop and did an ADB device lookup. VOILA ! It was there but now i was wondering how to get it into the fastboot mode from there. After crashing my head several times and punching a few commands my device booted into the orange heaven for a hacker. "The FASTBOOT Mode." So if you are in the same situation i hope this guide will be able to help you unbrick your device.
Steps:
1. Power on your device until the dreadful TWRP LOGO starts flashing.
2. Connect your kindle with your PC.
3. Type in "adb devices" and check if your device is available.
4. If your device shows up in ADB Devices List, Proceed to the next step.
5. Type in "adb reboot bootloader"
6. Now the device will boot into the fastboot mode.
7. Download TWRP from here
8. cd to the folder where your twrp image has been downloaded and type "fastboot -i 0x1949 flash recovery kfhd7-twrp-2.8.7.0-recovery.img" to flash it

TWRP downloading from the link indicated installs a Trojan on your PC. Caution

ancestrale59 said:
TWRP downloading from the link indicated installs a Trojan on your PC. Caution
Click to expand...
Click to collapse
This version TWRP has been uploaded by @Hashcode , Kindly use the second button to download (BlueColor) and not the 1st one.

Title
Do you want me to test it? I will be able to do so in about 1-2 months because I have the same problem. I'm gonna save this page in favorites until then.
Sent by my kfhd7 with BeanStalk-4.4.4065-20141002-tate and Twrp 2.8.7.0

Okay, I've put in the last command, and now it says it is waiting for any device. It doesn't seem to want to detect my device, any ideas?
EDIT: Nevermind, just had to set it to the adb composite driver!

device never booted into fastboot mode
sxrmafia said:
Recently while updating my Kindle Fire HD 7, my device went into a bootloop where it would boot into TWRP and the TWRP logo kept blinking, I live at a place where it is impossible to procure a factory cable. After numerous failed attempts on making one myself i gave up on factory cables. I however wasn't satisfied enough by my failures so i went the hard way and out of curiosity connected my Kindle to my Laptop and did an ADB device lookup. VOILA ! It was there but now i was wondering how to get it into the fastboot mode from there. After crashing my head several times and punching a few commands my device booted into the orange heaven for a hacker. "The FASTBOOT Mode." So if you are in the same situation i hope this guide will be able to help you unbrick your device.
Steps:
1. Power on your device until the dreadful TWRP LOGO starts flashing.
2. Connect your kindle with your PC.
3. Type in "adb devices" and check if your device is available.
4. If your device shows up in ADB Devices List, Proceed to the next step.
5. Type in "adb reboot bootloader"
6. Now the device will boot into the fastboot mode.
7. Download TWRP from here
8. cd to the folder where your twrp image has been downloaded and type "fastboot -i 0x1949 flash recovery kfhd7-twrp-2.8.7.0-recovery.img" to flash it
Click to expand...
Click to collapse
I've done all the steps the device is recognized but unauthorized, it doesn't boot into fastboot mode at all. I'm stuck here so many headaches i've had from this

movemaker said:
I've done all the steps the device is recognized but unauthorized, it doesn't boot into fastboot mode at all. I'm stuck here so many headaches i've had from this
Click to expand...
Click to collapse
I am encountering the same issue.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Root mi5

Hi I've been trying to root this phone all day and I'm getting to the stage were this phone might fly out my window if i can get this sorted soon so I'm asking for some help with the issues I'm having i managed to unlock the phone i can boot into fast boot but i cant boot into twrp i have read numerous guides but I'm still stuck and Iv never really used command prompt either so I'm lost with that if anyone can talk me through this
Sent from my MI 5 using Tapatalk

Are you on miui MM or N?

I'm on miui global 8.2|stable 8.2.2.0 (naamieb)
Sent from my MI 5 using Tapatalk

I'm assuming you have usb debugging, adb drivers and all set up.
If you've set any password or pattern lock or PIN, remove it
Download this https://drive.google.com/open?id=0B8rqkXJNwRqLa1JIY1B5TGpkN2M
Extract to your desktop
Download latest twrp 3.1.0-x . Link is available in another thread in this forum
Place the downloaded image on your phone's internal memory
Power off and enter fastboot mode. Connect to your PC
Open the folder you had extracted earlier. Rename the recovery image to twrp.img
Press shift+right click and open command window
Execute this code
fastboot devices (to make sure if phone is being detected properly.)
fastboot boot twrp.img
Now it will boot into the recovery. The recovery is in chinese by default. In the main screen, select the sixth option which is settings, then select the rightmost tab on the next screen and change the language.
Next install the latest twrp image you had placed on phone memory earlier, select "Recovery" and reboot. You will have installed twrp permanently.
Then flash supersu 2.79 and you're set

when I extract the files it dosent create a folder just the files I can just make the folder but what do I name it also theres no recovery image file

casuk said:
when I extract the files it dosent create a folder just the files I can just make the folder but what do I name it also theres no recovery image file
Click to expand...
Click to collapse
Just create a new folder on desktop and extract to it. The file named ZCX-TWR-3.0.2-X... Is the image file which you need to rename to "twrp"

thanks mate I done that when I try to drag n drop the twrp-3.0.2-0-gemini file to my phone it it fails saying the device has either stopped responding or has been disconnected

casuk said:
thanks mate I done that when I try to drag n drop the twrp-3.0.2-0-gemini file to my phone it it fails saying the device has either stopped responding or has been disconnected
Click to expand...
Click to collapse
You're having issue with copying files to your phone storage?
Reinstall the Xaiomi drivers

how do I reinstall the drivers, also when the phone is connected to the pc if I go to the phone it says portable media player and its empty inside.
and when I go to command prompt and type fastboot devices I get a code then fastboot and then I type fastboot boot twrp.img it says could not load twrp.img : no error

I can't get this working i done all in you guide i have downloaded the drivers but still can't get by the phase i posted above what do i do next
Sent from my MI 5 using Tapatalk

It's okay if it shows portable media player but if it's not showing any files inside it, you have a problem. Go to developer options > enable USB debugging and click Revoke USB authorisations. Device drivers install automatically when the device is connected but you can get them seperately as well, just search for mi 5 drivers and install them. Now connect to PC and see if you can access files on your device. If you can, proceed with the guide I've given

When you say device drivers install automatically when the device is connected do you mean they install to the PC
Sent from my HTC One using Tapatalk

I have installed the drivers as far as I'm aware
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my HTC One using Tapatalk

Hi I'm still not able to install/flash twrp so i can root my device i think it's something to do with the device not the pc as phone storage is empty any ideas what i should do
Sent from my MI 5 using Tapatalk

download mi flash http://api.bbs.miui.com/url/MiFlash
install mi flash if you are on windows 8 or above, you need to disable driver singnature enforcement - how to? google it.
during mi flash installation some windows will pop up, just click install this driver anyway. after installation go to c: > xiaomiflash > source > thirdparty > google > android then shift + right click > open command window here. Power off your phone and boot into fastboot then connect to pc. On command window type fastboot devices if xxxxxxx fastboot or something show up on next line, you successfully install fastboot driver.

I have already done that and got f******9 fastboot
then I type fastboot boot twrp.img and I get
cannot load 'twrp.img' = no error
that's exactly what comes up in command prompt and that's as far as I can get also if I boot into recovery I get 3 options reboot, wipe or im assistant so twrp has not installed,
iv been at this for 3 days now and im not any further than I was back then

See if i factory reset my phone and start fresh would i loss my unlocked status
Sent from my MI 5 using Tapatalk

casuk said:
I have already done that and got f******9 fastboot
then I type fastboot boot twrp.img and I get
cannot load 'twrp.img' = no error
that's exactly what comes up in command prompt and that's as far as I can get also if I boot into recovery I get 3 options reboot, wipe or im assistant so twrp has not installed,
iv been at this for 3 days now and im not any further than I was back then
Click to expand...
Click to collapse
Try to install twrp, fastboot flash recovery xxx.img.
And if you want temporarily, fastboot boot recovery xxx.img.
If you are on miui, you must use zcx twrp or else it won't boot.
Good luck.

done as you say still no boot into twrp

casuk said:
done as you say still no boot into twrp
Click to expand...
Click to collapse
I think something is wrong with your twrp.img. Try redownloading. Use latest twrp from twrp.me or zcx from afh.
fastboot flash recovery xxx.img, then disconnect the phone. Press and hold power+vol_up until you see mi logo.

Cant flash TWRP - error: device '(null)' not found in adb

Hi all.
I would not be writing this topic if everything I did havent failed.
I tried every possible solution to this I was able to find on the internet - nothing has worked so far.
I tried doing this on different PCs - same result.
I flashed Syberia ROM but didnt like it so decided to go with MIUI 9.7.10.12. I already had TWRP at that time but when I flashed MIUI everything erased, I mean everything - data, storage, TWRP everything.
System works fine but I am unable to flash TWRP with constant message: error: device '(null)' not found.
ADB device not found but fastboot works and ADB shows device connected. The phone is authorized with USB debugging turned on, drivers installed on PC, TWRP image file is correct. I am lost :/ dont know what to do.
Please help

there is no need to flash recovery via adb. twrp should be flash from fastboot. turn off your phone, hold volume down and power for few seconds and phone will boot in fastboot mode.
fastboot flash recovery twrp.img
Click to expand...
Click to collapse
and done.

sunilromy said:
there is no need to flash recovery via adb. twrp should be flash from fastboot. turn off your phone, hold volume down and power for few seconds and phone will boot in fastboot mode.
and done.
Click to expand...
Click to collapse
Where should I type in the command if not in ADB?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If I go manually to recovery (vol up + power) the phone reboots to stock recovery so the TWRP is not installed. I tried different versions of TWRP. no progress

Type
Fastboot reboot
and now you can go to twrp recovery by manually .. Power off phone, volume up + power
Or you can also do this

sunilromy said:
Type
Fastboot reboot
and now you can go to twrp recovery by manually .. Power off phone, volume up + power
Or you can also do this
Click to expand...
Click to collapse
fastboot reboot --> phone goes to system
vol up + power --> stock recovery
the problem is TWRP is not flashing :/
it is not USB debugging problem, not USB drivers problem.
The other thing is I can go to fastboot through ADB only when im on CHARGING MODE, it doesnt work on MTP MODE where it should.

brother you just flashed twrp successfully in the screenshot you posted, point is miui, dont let it stick when you boot to system and reboot.
you should, do this. go to fastboot
fastboot flash recovery twrp.img
fastboot boot twrp.img
Click to expand...
Click to collapse
you can flash other modded recovery which will stick. like zcx

sunilromy said:
brother you just flashed twrp successfully in the screenshot you posted, point is miui, dont let it stick when you boot to system and reboot.
you should, do this. go to fastboot
you can flash other modded recovery which will stick. like zcx
Click to expand...
Click to collapse
thx, that command worked

but why I cant go to TWPR using vol up + power?

fastboot boot twrp.img doesn't work for me, after it just black screen with MI logo and "Unlocked" for a long time...
can't enter twrp in any way after success flashing :crying:

Need help with this. Can't sideload with adb fastboot is working fine though.

How can I solve "FAILED (remote: This partition doesn´t exist error)"?

From TWRP > tap Advanced > Terminal > run command: mkdir -p /data/media/0/
Copy the rom to your phone internal storage from pc
Install by finding the transfered rom in the internal storage.

Development ***CLOSED***[RECOVERY] [A11-A12] [UNOFFICIAL] TWRP 3.6.11 RECOVERY M32 4G (SM-M325F/FV)

***Mod Announcement: Thread has been locked and download links removed due to XDA GPL violations.***
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I would like to thank TeamWin for their amazing work!
I saw that the newer Samsung MediaTek phones were not getting any sort of love, so I bought one myself to kick start the development.
TWRP is the obvious choice as it is reliable and trustworthy with frequent updates and patches.
INSTALLATION:
Odin Method (Windows):
Step 0: Unlock Device Bootloader by toggling the OEM Unlock option in Developer Options. Device will reboot to Odin mode and will prompt you to long press volume up, device will then unlock bootloader and perform a complete factory reset so make sure to backup any data.
Step 1: Download the unofficial TWRP image from the link attached below.
Step 2: Put the device in Odin download mode by holding VolumeUp+VolumeDown and inserting USB cable after the device is completely shut down.
Step 3: Select the downloaded recovery.tar in AP slot and vbmeta_disabled_R.tar in USERDATA slot, connect the device to PC, go to options and untick "Auto-Reboot"
Step 4: Click START and the Device will get flashed, Odin will say SUCESS!.
Step 5. Exit Download mode by holding VolumeDown+PowerButton and then immediately boot
into Recovery mode by pressing VolumeUp+PowerButton.
Step 6: Congratulations, you have installed TWRP latest for your M32 4G, to access the system now, you need to perform some additional steps.
Step 7: Open up TWRP terminal and then type in "multidisabler" and then perform a full factory reset again by going into "Wipe" -> Format Data -> type "yes"
Step 8: Now stock ROM should work fine with TWRP!
Heimdall Method (Linux):
Step 1: Install heimdall tool on linux , google it.
Step 2: Put the device in Odin download mode by holding VolumeUp+VolumeDown and inserting USB cable after the device is completely shut down.
Step 3: Open up terminal in the downloaded TWRP directory, extract twrp image from recovery.tar
Step 4: Enter the command "heimdall flash --RECOVERY recovery.img --no-reboot" where twrp.img is name of the downloaded image
Step 5. Exit Download mode by holding VolumeDown+PowerButton and then immediately boot
into Recovery mode by pressing VolumeUp+PowerButton.
Step 6: Congratulations, you have installed TWRP latest for your M32 4G, to access the system now, you need to perform some additional steps.
Step 7: Open up TWRP terminal and then type in "multidisabler" and then perform a full factory reset again by going into "Wipe" -> Format Data -> type "yes"
Step 8: Now stock ROM should work fine with TWRP!
COMPATIBILITY:
TWRP Recovery is compatible with latest Android 11-12 firmware
tested on:
M325FXXU3AUK1, M325FXXU4AVB1 ,M325FXXU4BVI2 as well
First time you boot into TWRP, don't forget to backup your EFS, Secondary EFS and NVRAM! Go into Backup and select "EFS,", "Secondary EFS" and "NVRAM" and backup to preferably MicroSDcard and copy it to your PC in case you need it if IMEI corrupts.
DON'T IGNORE THIS STEP!
DOWNLOADS:
VBMETA DISABLED FOR R: ***Link Removed***
TWRP TAR: ***Link Removed***
by [email protected] #PruhBootlooper
@cha0scl0wn

[TUTORIAL] Revive your hardbricked M3 and revert back to EMUI 5/ Android 7

WARNING​
This tutorial is only for you who have hardbicked your M3 (BTV-DL09). This is the last option you have. If you still access any method or at least fastboot, please consider to use any other method.
Once again it is the last method to revive your device
As usual DO IT WITH YOUR OWN RISK. I WILL NOT RESPONSIBLE FOR ANY DAMAGE OF YOUR DEVICE
Scenario:
For some reason your device is hardbricked and nothing userfull method suitable to bringging back you device
Tools :
IDT Application can be downloaded here
Board Software can be downloaded here
ADB Software
HUAWEI APP Extractor can be downloaded here
Tools to open your device screen
USB cable
STEP 1:
Revive your device into basic firmware using IDT
Please refer to this tutorial to doing that. Your test point can be found by opening your screen device. please be careful when you open it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This method will bring you to the basic firmware of this device (EMUI 2).
From here, your SIM will be locked. (I'm still dont know how to unlock, but everyting work well)
STEP 2
Update to EMUI 4
To do that you can use one of the following method:
a. Using dload
b. Using fastboot (I use this method because i dont have SD Card or USB OTG ), so i will explain this method.
You can download the firmware here
After downloaded, ectract UPDATE.APP from dload folder using APP Extractor.
Extract following files to your ADB folder:
- BOOT.IMG
- CUST.IMG
- SYSTEM.IMG
- FASTBOOT.IMG
- RECOVERY.IMG
Now we will flash IMG file.
* Boot into fastboot by connecting your device using USB cable
* open CMD then locate to your ADB folder
* type following command
Code:
adb devices
//to check connected devices
adb reboot fastboot
//you rdevice will reboot into fastboot mode
fastboot devices
//check connection
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash fastboot fastboot.img
fastboot reboot
Now disconnect your device. Your device should reboot system and running Android 6 EMUI 4.1
NOTE : First boot will take long time, so be patient
STEP 3
UPDATE TO EMUI 5 ANDROID 7
To do that we need to install TWRP. First you can download this version of TWRP for EMUI 4
You can refer to this tutorial to install TWRP
Download this OEM info
Copy oem info folder to SD Card or USB OTG. Place it in the folder TWRP/BACKUPS/<SERIAL NUMBER>
You can find SERIAL NUMBER on about tablet>>status>>SERIAL NUMBER
Download firmware BTV-DL09C100B307 form here and extract two zip file into SD Card/USB OTG root folder
Put in your SD Card/USB OTG
Now reboot into recovery > restore > locate your OEM info folder > restore.
Install update.zip
Install update_data_full_hw_eu.zip
Wipe
reboot system
First boot will took longer than first boot and you see Huawei logo if success
Congratulation, your device now running Android 7 EMUI 5.0.1
Optional you can install TWRP for android 7 here