I want to disable any kind tracking fitness activity as not being useful for me and doing that will see better battery life.
I try trough settings but didn't find any option for that.
Anyone know how to disable it?
Thanks.
Sent from my iPad using Tapatalk
In the Settings, go into Permissions and disable sensor access for at least ZenFit and Google Fit as well as Google Play-Services.
That should give you much more battery life as step counting alone can be very energy consuming.
Ok thanks.
I've only disable the first two not google services as I'm afraid not having any multifunction with various app or notification.
Sent from my iPad using Tapatalk
paatha13 said:
Ok thanks.
I've only disable the first two not google services as I'm afraid not having any multifunction with various app or notification.
Sent from my iPad using Tapatalk
Click to expand...
Click to collapse
I was about to say the same thing, if you disable google services then
you will no longer get gmail and other notifications.
If you guys want to really save a lot of battery life simply disable wifi
and change it from automatic to OFF, that's the one thing which I
have found which noticeably saves battery longevity.
The wifi is intended as a backup services for notifications only.
I don't mind loosing bluetooth connection for a few seconds once
in a great while, so far I have not even noticed any difference
in my notifications with wifi in auto-mode or disabled.
Seems like Zenfit app keeps tracking even if body sensor permission is revoked? Is Android wear itself bugged or because it's special kind of bloatware from Asus?
Block it from access to watch.
Gesendet von meinem ONEPLUS A3003 mit Tapatalk
how?
If a message from fit appears on the screen swype to the left until "block app" appears.
Gesendet von meinem ONEPLUS A3003 mit Tapatalk
Der-Knuffi said:
If a message from fit appears on the screen swype to the left until "block app" appears.
Gesendet von meinem ONEPLUS A3003 mit Tapatalk
Click to expand...
Click to collapse
Doesn't that just block the message? it doesn't stop the app from tracking...
Then have a look under settings - > authorisations (don't know exactly the term used in englisch settings).
Gesendet von meinem ONEPLUS A3003 mit Tapatalk
Der-Knuffi said:
Then have a look under settings - > authorisations (don't know exactly the term used in englisch settings).
Gesendet von meinem ONEPLUS A3003 mit Tapatalk
Click to expand...
Click to collapse
Ah, yes, looks like you are correct. Settings / Permissions / Zen Fit, then turn of sensor access.
TheKaz said:
Ah, yes, looks like you are correct. Settings / Permissions / Zen Fit, then turn of sensor access.
Click to expand...
Click to collapse
Even if you turn that off, Zenfit app still keeps tracking your steps.
Then delete zen fit
Gesendet von meinem ONEPLUS A3003 mit Tapatalk
Der-Knuffi said:
Then delete zen fit
Gesendet von meinem ONEPLUS A3003 mit Tapatalk
Click to expand...
Click to collapse
You can't delete it.
Uninstall it on your phone?
Gesendet von meinem ONEPLUS A3003 mit Tapatalk
Der-Knuffi said:
Uninstall it on your phone?
Gesendet von meinem ONEPLUS A3003 mit Tapatalk
Click to expand...
Click to collapse
It's a system app
Do you have an Asus Phone? Otherwise it shouldn't be a system app.
Gesendet von meinem ONEPLUS A3003 mit Tapatalk
Der-Knuffi said:
Do you have an Asus Phone? Otherwise it shouldn't be a system app.
Gesendet von meinem ONEPLUS A3003 mit Tapatalk
Click to expand...
Click to collapse
It's a system app in your watch...
Remove it via TWRP https://forum.xda-developers.com/zenwatch-3/how-to/guide-reboot-recovery-fastboot-unlock-t3546743
Related
My Z1 gets on my nerves with its constant energy saving tips spam. It does have a "click here if you don't want this anymore" below every message, it's just that this seems to do zilch ... nothing happens. I could not find an option in the energy options of the system preferences to disable this message nusiance, either.
Any ideas?
It should do, click on the option so its ticked then click OK
That's the prob, it doesnt get ticked... Odd.
Gesendet von meinem SGP312 mit Tapatalk 4
voon said:
That's the prob, it doesnt get ticked... Odd.
Gesendet von meinem SGP312 mit Tapatalk 4
Click to expand...
Click to collapse
I've got the same problem.
Same problem here
Sent from my C6903 using Tapatalk
Hey folk i wonder if someone could made an Smooth Scrolling mod for the New euphoria OS marshmallow rom ? It would be awesome
Gesendet von meinem Nexus 6 mit Tapatalk
CroW_D said:
Hey folk i wonder if someone could made an Smooth Scrolling mod for the New euphoria OS marshmallow rom ? It would be awesome
Gesendet von meinem Nexus 6 mit Tapatalk
Click to expand...
Click to collapse
adjust your governor/scheduler, no need for a "mod". i use ondemand(sampling rate of 13500, up threshold of 98)/deadline.
simms22 said:
adjust your governor/scheduler, no need for a "mod".
Click to expand...
Click to collapse
Some recomendations ?
Gesendet von meinem Nexus 6 mit Tapatalk
CroW_D said:
Some recomendations ?
Gesendet von meinem Nexus 6 mit Tapatalk
Click to expand...
Click to collapse
yea, i edited my post. look at it again :angel:
but thats just my preference, other people like it set up differently.
simms22 said:
yea, i edited my post. look at it again :angel:
but thats just my preference, other people like it set up differently.
Click to expand...
Click to collapse
THX i will try
Gesendet von meinem Nexus 6 mit Tapatalk
FYI: "smooth scolling" just means that you have it set up so that the processor cores clock up to high rate sooner and stick there longer. Technically, this results in an increase in power consumption. Personally, I find it more useful to go the reverse route, since battery life is more useful to me than having an absolutely fluid UI.
I'd recommend Blu spark kernel, defaults are giving me the smoothest UI i've seen in a while on Cataclysm rom.
Hello,
I would like to by-pass the Oculus App when I'm connecting my Samsung Galaxy S6 edge + on the VR.
Actually, I try to connect my Easycap but it's impossible to start any application even when I'm using Package Disabler Pro.
I thought about 2 solutions:
- Modify physically the usb by using a switch
- Create an Oculus app which will call apps
Is someone has the same need or has a solution?
Thank you,
someone here did create a thread where he disasambled the gearVR to bypas the MicroUSB. But a switch will not be possible I think.
But why shoulf someone want to do this?
Gesendet von meinem SM-G928F mit Tapatalk
gearVR Teardown http://www.roadtovr.com/consumer-gear-vr-teardown-reveals-easily-replaceable-lenses/
Gesendet von meinem SM-G928F mit Tapatalk
Thank you for your reply.
In order to use it as FPV google.
ahhh ... cool
Gesendet von meinem SM-G928F mit Tapatalk
UP !
You may be better off using Google Glass to try it. Them you won't break the vr only to find out your fatsharks were better?
Sent from my SM-G935V using Tapatalk
I just took delivery of my Zenwatch 3, and was reading about the problems encountered by those who upgraded to Wear 2.0. I also read a review of the ZenFit app which said that, after the 2.0 update, several apps could not be installed to the watch: Zenwatch Manager, Zenwatch Remote Camera and FaceDesign (all of which I would like to use). Since most of what I've read is from 2017 I was wondering whether there were still serious issues with Wear 2.0, and hence whether it would be wise for me to stick with 1.5?
Any views?
IMHO the performance is still worse than 1.5
Gesendet von meinem ONEPLUS A3003 mit Tapatalk
Der-Knuffi said:
IMHO the performance is still worse than 1.5
Click to expand...
Click to collapse
How about the battery life?
Comparable.
Gesendet von meinem ONEPLUS A3003 mit Tapatalk
In what ways do you notice the performance to be worse than 1.5 - is it with specific apps, or is the watch generally more laggy?
Apps and the Google Assistent need ages to start.
Gesendet von meinem ONEPLUS A3003 mit Tapatalk
Just to flip the question around - is there any good reason to upgrade to Wear 2.0? I'm getting prompted repeatedly on the watch to install a software update (presumably to Wear 2.0). Is there any single feature that really sells it?
Hm, tough question...
Security updates?
Wear OS gets updates by Google, not by Asus (they abandoned the watch).
Janjan's OS was faster than default Wear 2. 0, but nowadays it does feel slow again.
I did not install his kernel, to be honest.
Gesendet von meinem ONEPLUS A3003 mit Tapatalk
So in terms of functionality and features, you haven't found anything particularly useful in Wear 2.0?
Nope.
Gesendet von meinem ONEPLUS A3003 mit Tapatalk
Hmmm....looks like I need to find a way of suppressing the software update notification that keeps popping up on the watch...
How to separate ring volume from notifications and system ?
Search for Volume Buttler or set it with tasker
Gesendet von meinem VOG-L29 mit Tapatalk
Did you try it?
Yes both.
Works i am actual using Tasker, sets Notification Volume every time when screen goes of
Gesendet von meinem VOG-L29 mit Tapatalk
Please give the apps links in google play
Volume Buttler must be searched via Google.
Tasker?
Really?
Search for Tasker in Play and here in XDA Board
Gesendet von meinem VOG-L29 mit Tapatalk
Are you using p30 pro ?
Yes
You can see it in the signature
Gesendet von meinem VOG-L29 mit Tapatalk
Did you understand my question?
Still no answer!!!
Any one can help please?
subrban said:
Still no answer!!!
Any one can help please?
Click to expand...
Click to collapse
People have answered, read up and search for the apps yourself
Because I have tried the app (buttler) before I repeated my question again!?
Any one can help simply ??
The answer of Blazerman is not clear !!!