[ROM][6.0.1_r81] LineageOS 13 [STABLE]?[Rom SPL 2019-03-05, Kernel SPL 2020-01-05] - Xiaomi Redmi Note 3 [Snapdragon] ROMs, Kernels, Re

[ROM][6.0.1_r81] LineageOS 13 [STABLE]?[Rom SPL 2019-03-05, Kernel SPL 2020-01-05] - Xiaomi Redmi Note 3 [Snapdragon] ROMs, Kernels, Re

Firmware
Note: Before proceeding, make sure that you are permitted to officially unlock your bootloader.
The bellow firmwares are based on MM bootloader and there are two ways to go:
Flash a miui rom that has MM bootloader. Unlock the bootloader officially. Flash firmware and rom.
Flash firmware. If all is ok, it means that you are on officially unlocked MM bootloader. If you get
a bootloop, it means that you were on LP bootloader and the MM one is now (re)locked. To solve this, boot
into fastboot (you will be unable to boot into recovery) and use the official tool to unlock it.
You are supposed to be on a firmware from this post. If this is not the case, please do not report bugs.
kenzo: firmware_kenzo_8.2.4.0.zip
kate: firmware_kate_8.2.4.0.zip
FAQ
- What are the default kernel settings on the latest build?
Governor:performance interactive, Swappines:40, VFS Cache Pressure:100, IO Scheduler:fiops, Display:~6400k, Charging Rate: 2000mAh, Touch Boost:on, Adreno Boost:on, Adreno Idler:off, DT2W:on-no vibration FSYNC:on , ZRAM:512MB, Speaker Boost: +7, Wakelocks:disabled.
- I have a slow download speed issue while downloading from play store.
This issue was introduced in gapps at a previous time point and continues affecting all cm-13.0 based roms. The only workaround so far is the use of a VPN server.
- I am unable to use my goodix fingerprint sensor.
After flashing rom and before first boot, flash this patch and then kernel zip (choose goodix in installer).
- I want to unroot the rom.
All builds come pre-rooted. To unroot, download and flash this zip through recovery.
- My device soft reboots whenever I try to uninstall an app and settings force close whenever I try to set the lock screen.
Starting from 20170614 build and on, these issues are absent. In case you wish to use a previous build along with the discontinued stock kernel, then use this firmware. Note that this firmware is based on LP bootloader.
- VoLTE does not work.
This ROM does not support VoLTE . However, it was reported that this solution works. You can try it, but do not ask me for support.
- I am unable not watch purchased content such as movies from google play.
This is because google widevine modular DRM is missing. Download this and flash it through recovery.
- Does this ROM support microG?
Yes.
- Is there any modded google camera app with HDR+ for MM?
Yes. Check this post .
Changelog
Code:
[B]20190503[/B]
ROM:
- ROM Security Patch Level 2019-02-01, 2019-03-01.
- Synchronized repository.
Kernel (v6.1.19->v6.1.22):
- Kernel Security Patch Level 2019-02-05, 2019-03-05, 2019-04-05.
- Updated WireGuard kernel module (v0.0.20190123->v0.0.20190406).
- Major under the hood update: Added 126 patches.
[B]20190204[/B]
ROM:
- ROM Security Patch Level 2019-01-01.
- Synchronized repository.
[B]20190124[/B]
ROM:
- ROM Security Patch Level 2018-11-01, 2018-12-01.
- Synchronized repository.
Kernel (v6.1.17->v6.1.19):
- Kernel Security Patch Level 2018-12-05, 2019-01-05.
- Updated WireGuard kernel module (v0.0.20181119->v0.0.20190123).
- Added 7 patches.
[B]20181121[/B]
ROM:
- ROM Security Patch Level 2018-10-01.
- Synchronized repository.
Kernel (v6.1.16->v6.1.17):
- Kernel Security Patch Level 2018-11-05.
- Updated WireGuard kernel module (v0.0.20181007->v0.0.20181119).
- Added 2 patches.
[B]20181019[/B]
ROM:
- ROM Security Patch Level 2018-09-01.
- Settings/DeviceInfo - Provide "patch level" explanation and disclaimer.
- Synchronized repository.
Kernel (v6.1.13->v6.1.16):
- Kernel Security Patch Level 2018-09-05, 2018-10-05.
- Patched against Spectre-V1.
- Updated prima WLAN driver to LA.BR.1.3.6_rb1.19.
- Updated WireGuard kernel module (v0.0.20180809->v0.0.20181018).
- Added 37 patches.
[B]20180828[/B]
ROM:
- ROM Security Patch Level 2018-07-01, 2018-08-01.
- Updated System Webview to v67.0.3396.87.
- Reduced radio logging.
- Synchronized repository.
Kernel (v6.1.11->v6.1.13):
- Kernel Security Patch Level 2018-07-05, 2018-08-05.
- Updated WireGuard kernel module (v0.0.20180625->v0.0.20180809).
- Added 22 patches.
[B]20180614[/B]
ROM:
- ROM Security Patch Level 2018-06-01.
- Synchronized repository.
Kernel (v6.1.10->v6.1.11):
- Kernel Security Patch Level 2018-06-05.
- Updated WireGuard kernel module (v0.0.20180420->v0.0.20180613).
- Added 5 patches.
[B]20180514[/B]
ROM:
- ROM Security Patch Level 2018-05-01.
- Synchronized repository.
Kernel (v6.1.9>v6.1.10):
- Kernel Security Patch Level 2018-05-05.
- Added and enabled WireGuard.
- Added 9 patches.
[B]20180423[/B]
ROM:
- ROM Security Patch Level 2018-04-01.
- Switched to a secure gps connection.
Kernel (v6.1.8>v6.1.9):
- Kernel Security Patch Level 2018-04-05.
- Added KSPL date to kernel version info.
- Added 7 patches.
[B]20180312[/B]
ROM:
- ROM security patch level 2018-03-01.
- Fixed BlueBorne related changes from September 2017 ASB.
Device:
- Set default heaphone gain to +7.
Kernel (v6.1.6>v6.1.8):
- Kernel security patch level 2018-03-05.
- Added 10 patches.
- Reworked gesture options in aroma installer (DT2W,S2W,S2S).
- Set default heaphone gain to +7.
[B]20180209[/B]
ROM:
- ROM security patch level 2018-02-01.
- Synchronized repository.
Kernel (v6.1.5>v6.1.6):
- Kernel security patch level 2018-02-05.
- Added 14 patches.
[B]20180121[/B]
ROM:
- ROM security patch level 2018-01-01.
- Synchronized repository.
Kernel (v6.1.1>v6.1.5):
- Kernel security patch level 2018-01-05.
- Added but reverted "Boeffla wakelock blocker" due to alarm issue.
- Added 5 patches.
- Updated the list of security vulnerabilities.
[B]20171215[/B]
ROM:
- ROM security patch level 2017-12-01.
- Fixed "app crash/cause bootloop when build with aapt2" issue.
Device:
- Updated default kernel config.
Kernel (v6.0.1>v6.1.1):
- Kernel security patch level 2017-12-05.
- Radon v6.1 changes.
- Added 32 patches.
- Updated the list of security vulnerabilities.
[B]20171113[/B]
ROM:
- ROM security patch level 2017-11-01, 2017-11-06 (KRACK).
Device:
- Updated default kernel config.
Kernel (v5.8.1->v6.0.1):
- Kernel security patch level 2017-11-05.
- Radon v5.9, v6.0 changes.
- Added 19 patches.
- Updated the list of security vulnerabilities.
[B]20171021[/B]
ROM:
- Patched against KRACK (Key Reinstallation AttaCK) vulnerability.
- Fixed "install button is disabled for some apps" issue.
- Removed gecko and added jelly (from los 14.1) as the default browser.
- Updated chromium-webview (Android System Webview) to 60.0.3112.78 (from los 14.1).
- Updated chromium-libpac and V8 javascript engine (from aosp 7.1.2_r33).
Kernel (v5.7.1->v5.8.1):
- Radon v5.8 changes.
- Added 3 patches.
- Updated the list of security vulnerabilities.
[B]20171015[/B]
Device:
- Updated default kernel config.
Kernel (v5.6.7->v5.7.1):
- Radon v5.7 changes.
- Rebranded to SecuRadon.
- Added SecuRadon splash screen.
- Updated the list of security vulnerabilities.
- Built using aarch64-linux-android-4.9-android-6.0.1_r81 toolchain.
[B]20171007[/B]
ROM:
- ROM security patch level 2017-10-01.
- Android 6.0.1_r81.
- Build id MOI10E.
Device:
- Removed default "+3 headphone/aux boost").
Kernel (v5.6.1->v5.6.7):
- Kernel security patch level 2017-10-05.
[B]20170922[/B]
ROM:
- Android 6.0.1_r80.
- Build id MOB31Z.
- Synchronized repository.
[B]20170919[/B]
ROM:
- Added signature spoofing permission capability. It can be enabled in
Settings>Apps>Advanced(gear icon)>App Permissions>Spoof package signature.
Kernel (v5.5.5->v5.6.1):
- Radon v5.6 changes.
- Added some missing patches.
[B]20170915[/B]
ROM:
- ROM security patch level 2017-09-01.
- Removed updater.
Device:
- Updated default kernel settings (speaker boost +7, headphone/aux boost +3).
Kernel (v5.3.2->v5.5.5):
- Kernel security patch level 2017-09-05.
- Further memory tuning improvement for 2gb users.
- Fixed "wrong 0.00B values in ram management" issue.
- Switched to flar2 sound control (supported in kernel adiutor >=0.9.72).
- Increased maximum charging current from 1500mAh to 2000mAh.
- Added option for old thermal engine to deal with possible slow charging issues.
- Increased max brightness.
- Disabled bcl hotplug.
[B]20170812[/B]
Kernel:
- Updated to SecureRadon v5.3.2.
- Added adrenoboost parameter.
- Tuned adrenoboost.
- Added display state awareness (adreno idler related).
- Declared display_on correctly (adreno idler related).
- Renamed "gaming config" to "performance config".
- Added a warning regarding possible device damage because of 2400mA charging.
- Added some security patches.
[B]20170810[/B]
ROM:
- 2017-08-05 security patch level.
Device:
- Updated default kernel settings.
Kernel:
- Updated to SecureRadon v5.3.1.
- Based on radon-cm-rebase.
- Kernel security patch level 2017-08-05.
- Switched back to sysfs3 sound control.
- "Not booting when selecting goodix" issue fixed.
- Some random function related patches.
- Fixed wrong "case_therm" thermal values.
[B]20170712[/B]
Rom:
- Added 2017-07-05 security patch level.
- Synchronized repository.
Kernel:
- Added 2017-07-05 security patches.
[B]20170630[/B]
ROM:
- Synchronized repository.
Device:
- Used MIUI stable build "V8.2.4.0.MHOMIDL" fingerprint.
- Added net_raw to ril daemon services.
- Added support for top-app cpuset.
- Set proper CPU variants.
- Cleaned up kernel cmdline.
- Synced with f/w native heap values.
- Enabled HW Acceleration on all aspect.
- Tweaked dex2oat.
- Better optimized 32bit blobs.
- Start qseecomd on post-fs.
- Added missing ANT+ permission.
- Enabled 24bit offload.
- Snap camera improvements.
- Made 1080p as default video size.
- Removed real time face beautification.
- Added highspeed recording profiles
(120fps @ 720p, 60fps @ 1080p).
- Disabled fluence on voicerec (Fixes oK google).
- Disabled mobile data on first boot.
Kernel:
- Updated security patched radon to 5.1.
- ARM64: configs: Set CONFIG_HZ to 300.
- Updated default radon settings (check FAQ).
[B]20170623[/B]
Device:
- Fixed "greenify shallow hibernation not working" issue introduced in 20170614 build.
- Set defaullt aux/headphones volume to +7.
[B]20170619[/B]
Device:
- Reverted "Tweaked screen (auto)brightness values".
- Included radon.sh.
Kernel:
- Updated security patched radon to 5.0.
[B]20170614[/B]
ROM:
- Added 2017-06-05 security patch level.
- Synchronized repository.
Device:
- Switched to LineageOS 14.1 audio configs.
- Updated GPS configs.
- Added VSYNC offsets.
- Ported: Add VR support.
- Fixed Wi-Fi Direct/P2P.
- Enabled Wi-Fi Display.
- Added miracast support.
- Tweaked screen (auto)brightness values.
- Faster app installation (using 6 cores instead of 4).
- Enabled boot dexpreopt. (faster 1st boot time)
- Did not make gello (gecko for now, probably jelly in the future).
- Added 'misc' entry in fstab.qcom .
- Added KeyDisabler.
- Built missing IPV6, audio and media packages.
- Removed auto-power-save mode overlay.
- Added eMMC Trim/Discard support.
- Included and updated init.radon.rc.
- Updated sec_config.
- Updated BoardConfig.mk
- Stopped the QC-QMI message spam.
Kernel:
- Changed the default kernel to security patched radon 4.9.
[B]20170529[/B]
Device:
- Revert "Switched to LineageOS 14.1 audio configs".
Kernel:
- ARM64: configs: Set CONFIG_HZ to 300
[B]20170525[/B]
Device:
- Silenced "qcom powerhal: Failed to acquire lock" logcat spamming message.
- Updated giflib to 5.1.4.
Kernel:
- Fix potential refcount leak in su check
[B]20170524[/B]
Device:
- Updated power configs.
- Enabled some audio features.
- Enabled BOARD_HAVE_QCOM_FM.
- Use Snapdragon LLVM toolchain.
Kernel:
- Only expose su when daemon is running.
[B]20170519:[/B]
- Switched to LineageOS 14.1 audio configs.
- Fixed "wifi not turning on" issue introduced in 20170513 build.
[B]20170505:[/B]
- Added 2017-05-05 security patch level.
- Synchronized repository.
[B]20170428:[/B]
- Lineage trebuchet launcher icon.
- Synchronized repository.
[B]20170415:[/B]
- Switched to LineageOS fork of freetype in order to apply a patch that fixes a security issue.
[B]20170411:[/B]
- android-6.0.1_r79
- MOB31T
- Synchronized repository.
[B]20170406:[/B]
- Added 2017-04-05 security patch level.
- Fixed "blue blinking screen after mi logo" issue (Thanks Umang96).
- Synchronized repository.
[B]20170329:[/B]
- Synchronized repository.
[B]20170323:[/B]
- Synchronized repository.
[B]20170314:[/B]
- Unified twrp recovery can now be flashed on kate devices
without getting an error.
- Fixed "-2%" battery percentage decrease rate issue.
- Faster device boot.
- Enabled correct HAL sensor.
- Fixed a53 cores max frequency.
- Synchronized repository.
[B]20170310:[/B]
- Added 2017-03-05 security patch level.
- Synchronized repository.
[B]20170306:[/B]
- Added ov16880_f16v01a, ov16880_omida05 and s5k5e8_yx13 camera sensor blobs.
- Reverted "Add widewine modular DRM support".
- Synchronized repository.
[B]20170301:[/B]
- Added s5k5e8_yx13 and s5k3p_f16s01c camera sensors support.
- Fixed s5k3p3_f3p3man camera sensor support.
- Added google widevine modular DRM.
[B]20170227:[/B]
- Synchronized repository.
[B]20170220:[/B]
- A few kernel fixes.
- Synchronized repository.
[B]20170214:[/B]
- Reverted 'Updated device audio configs to the ones from official LineageOS 14.1'.
- Synchronized repository.
[B]20170213:[/B]
- Added 2017-02-05 security patch level.
- Synchronized repository.
[B]20170204:[/B]
- Updated device audio configs to the ones from official LineageOS 14.1.
- android-6.0.1_r78
- Some other minor changes.
- Synchronized repository.
[B]20170202:[/B]
- Fixed "same for all" bluetooth address issue.
- Tweaked autobrightness values.
- Synchronized repository.
[B]20170127:[/B]
- Added s5k5e8_z5e8yab front camera sensor missing blobs.
- Synchronized repository.
[B]20170123:[/B]
- Fixed headphones hissing sound issue.
- Synchronized repository.
[B]20170120:[/B]
- Added missing patches to the kernel so that it complies with 2016-08-05 security patch level.
- Synchronized repository.
[B]20170118:[/B]
- Lineage boot animation.
- Enabled built-in SU.
- Added missing patches to the kernel so that it complies with 2016-07-05 security patch level.
- Synchronized repository.
[B]20170113:[/B]
- Rebranded kernel and device to lineage.
- Synchronized repository.
[B]20170108:[/B]
- Added 2017-01-05 security patch level.
- Synchronized repository.

VoLTE?

Finally for users still using cm13 get latest updates. Thanks dev and will dual sim card works fine on this rom? Because last time using cm13 my sim1 can't detect .
Only on cm14 my dual sim works fine because there is global network preference on cm14 and cm13 doesnt have "global" preference network. Does this rom will have global network type? Can you make sure it dev? Thanks
Ps. My sim card on sim1 only works on global prefered network and only cm14.1 variant rom have it. If cm13 have it i want to test it.

zilan said:
Finally for users still using cm13 get latest updates. Thanks dev and will dual sim card works fine on this rom? Because last time using cm13 my sim1 can't detect .
Only on cm14 my dual sim works fine because there is global network preference on cm14 and cm13 doesnt have "global" preference network. Does this rom will have global network type? Can you make sure it dev? Thanks
Ps. My sim card on sim1 only works on global prefered network and only cm14.1 variant rom have it. If cm13 have it i want to test it.
Click to expand...
Click to collapse
Which firmware do you use?

gismoO said:
Which firmware do you use?
Click to expand...
Click to collapse
When on cm 13 im using the strix firmware and now im on cm14 using psy firmware because the strix cm14 firmware re lock bootloader.
Does your lineageos have this type prefered network? Only global network will works for my sim1. Thanks
Ps. Does your lineage support cmte/oms?

What About VOLTE??

Clean Flashed rom on top of xenonhd Nougat rom. Even after flashing strix firmware, network didnt get detected. Restored efs and firmware of miui dev rom. Now everything working fine.
Awesome rom, thanks for keeping cm13 alive in the form of LOS.
Can you give an update with Jan'17 android security patch in coming days?
Sent from my Redmi Note 3 using XDA Labs

There is something in the changelog like " FORCE ENABLE VOLTE"....will this rom supports volte..???

zilan said:
When on cm 13 im using the strix firmware and now im on cm14 using psy firmware because the strix cm14 firmware re lock bootloader.
Does your lineageos have this type prefered network? Only global network will works for my sim1. Thanks
Ps. Does your lineage support cmte/oms?
Click to expand...
Click to collapse
TheStrix cm13 firmware is old, use a newer one to see if it fixes your dual sim problems. I don't use dual sim. No, It does not have global network mode. Yes, It does support cmte.

Can we dirty flash on top of CM13? Can anyone PLEASE tell me if Google play movies is playing purchased content?

Sameerjavedchd said:
What About VOLTE??
Click to expand...
Click to collapse
KakaRrottt said:
VoLTE?
Click to expand...
Click to collapse
kiran G. said:
There is something in the changelog like " FORCE ENABLE VOLTE"....will this rom supports volte..???
Click to expand...
Click to collapse
OMFG, plz read first post and stop idiot question........
VoLTE Support: No

gismoO said:
TheStrix cm13 firmware is old, use a newer one to see if it fixes your dual sim problems. I don't use dual sim. No, It does not have global network mode. Yes, It does support cmte.
Click to expand...
Click to collapse
I remember i also have try newest cm13 firmware shared by xda member here but it also doesn't support global network.
But strange on N based rom mostly it detect global network. Does it not related on rom?
Which firmware you suggest it?

bluetooth address fixed ?

KakaRrottt said:
VoLTE?
Click to expand...
Click to collapse
See Version Information...
---------- Post added at 08:33 PM ---------- Previous post was at 08:31 PM ----------
Sameerjavedchd said:
What About VOLTE??
Click to expand...
Click to collapse
See Version Information...
---------- Post added at 09:02 PM ---------- Previous post was at 08:33 PM ----------
I'm currently on a Kenzo with Goodix FP, ZCX TWRP 3.02-X, SuperSU 2.79 and MIUI 8.1.1, patiently waiting for the CM/LOS issues to subside first.
So, for me to install LOS for the first time, are these the appropriate steps?
1. Boot to Recovery.
2. Reset phone.
3. Flash latest firmware ZIP suggested by gismoO (https://www.androidfilehost.com/?fid=673368273298921859)
4. Flash LineageOS 13.0 20170106 ZIP (https://www.androidfilehost.com/?fid=673368273298921688)
5. Flash Goodix fix (no idea which one to install among so many links scattered all over XDA)
6. Reboot.
Can somebody help me with this?
Also, lots of Kenzo CM 13.0 users complained over camera issues. Are they still there?
It would be good to have a bug list.
Great job @gismoO and thanks in advance.

gismoO said:
TheStrix cm13 firmware is old, use a newer one to see if it fixes your dual sim problems. I don't use dual sim. No, It does not have global network mode. Yes, It does support cmte.
Click to expand...
Click to collapse
Where to download latest cm13 firmware?

exodius48 said:
Where to download latest cm13 firmware?
Click to expand...
Click to collapse
Just restore miui dev rom efs and firmware if you have backuped
Sent from my Redmi Note 3 using XDA Labs

bozarjoska said:
OMFG, plz read first post and stop idiot question........
VoLTE Support: No
Click to expand...
Click to collapse
Chill dude, I asked that just after 1 minute of creating OP, before he edited post about VoLTE.
Take into other perspectives before calling something an "idiot question"....

Siddk007 said:
Just restore miui dev rom efs and firmware if you have backuped
Sent from my Redmi Note 3 using XDA Labs
Click to expand...
Click to collapse
Then the cm14 firmware by strix will work with this rom?

[email protected] said:
Then the cm14 firmware by strix will work with this rom?
Click to expand...
Click to collapse
No need for flashing firmware
Sent from my Redmi Note 3 using XDA Labs

Related

[ABANDONED][Z][ROM][5.1.1] Resurrection Remix [UNOFFICIAL]

Code:
*** Disclamer
Since you are here, I hope you already know that flashing custom ROMs (including unlocking the bootloader)
will VOID YOUR WARRANTY and is a chance to BRICK your device if you're inexperienced.
Do as you think is best, on your own responsibility.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Introduction
This is a continuation of the great work done by @Alx31[/user]TLse on RR 5.0.2
The builds are going to be unofficial and experimental, so there may be bugs.
Click to expand...
Click to collapse
About Resurrection Remix
Resurrection Remix the ROM has been based on CM, Slim, Omni and original Remix ROM builds, this creates an awesome combination of performance, customization, power and the most new features, brought directly to your Device
Many things that in previous versions were tweaked with mods, are now included by default in the ROM so, please enjoy!
Special thanks to, the CM team, OMNI team, SLIMROMS and of course to all the supporters!
Click to expand...
Click to collapse
Official Site:
You can find all the information about Resurrection Remix on their official site:
http://www.resurrectionremix.com/
Click to expand...
Click to collapse
Installation instructions
Fresh install:
- Download the latest build
- Download Gapps & SuperSU
- Take a nandroid backup
- Recommended - Full wipe and factory reset
- Flash ROM using latest ClockworkMod or TWRP recovery (this one is recommended)
- Flash Gapps
- Flash SuperSU
- Reboot.
- Enjoy!
Update:
- Download the latest build of Resurrection ROM
- Take a nandroid backup
- Flash ROM using recovery
- Wipe cache
- Wipe dalvik cache
- Reboot
- Enjoy!
Click to expand...
Click to collapse
Download
until build 04/29 and from build 05/20
Android File Host
Resurrection Remix Folder
builds 05/03 through 05/15
Basketbuild
Resurrection Remix Folder
Click to expand...
Click to collapse
Suggested Gapps:
Banks Gapps
Delta Gapps
Click to expand...
Click to collapse
SuperSU
(make sure you enable SuperSU addon.d support (SuperSU -> Settings -> Custom ROM -> Install SuperSU backup script) in order to have it preserved after updating ROM)
Changelog
https://gist.github.com/westcripp/8874051
Click to expand...
Click to collapse
Unofficial Build changelog:
20150405
- First build
20150408
- Using .293 blobs
20150409
- Updated to Resurrection Remix 5.4.1
20150411
- Reverted to a bit older blobs (.283) to introduce better stability
- updated the device trees with latest commits related to 5.1
- synced with latest RR ad CM commits
20150415
- (experimental) f2fs support
- (experimental) GPU OC to 487MHz
- various kernel improvements
- updated to new LP build 5.1.0_r5
20150417
- fixed GPS
- fixed addon.d script backup/restore functions
- fixed MultiROM TWRP OTA survival (if installed in FOTAkernel)
20150424
- RR is updated to 5.4.2
- unofficial update to LP 5.1.1_r1
- new kernel source code, an unofficial mix of KMA kernel base while keeping EvoMix features.-
- new kernel features:
- kernel version 3.4.107 - kma branch
- several new CPU governors and one new I/O scheduler, keeping all of EvoMix ones
- Intelli-Thermal as an option to thermald
- Power Suspend - a new and improved Kernel Power Management Driver
- Conservative GPU governor
- PRIMA wi-fi driver built from a different source base
- removed Simple GPU governor, incompatible with the new kernel code.
20150425
- fixed reboots by switching to fixed prima driver
- fixed maximum sleep frequency control
Kernel Update 20150427
- Using newer and better Adreno (graphics) kernel driver
- Re-added Simple GPU Governor, replacing Conservative
- lowest GPU frequency back to 27 MHz
- Added ElementalX CPU governor as per EvoMix's newest commits and changes
20140429
- updated RR to 5.4.3
- LP officially updated to 5.1.1
- (kernel) updated prima to CAF sources and synced with latest patches (LA.AF.1.1_rb1.17)
- (kernel) synced with latest security-related and other patches (details here: https://github.com/airlessproject/kernel_apq8064/commits/evo+kma)
- (kernel) using intelli-thermal as default thermal monitor
- (kernel) removed the Android Logger driver (no longer required)
- (device) changed default DPI from 480 to 445 (generally smoother and more natural)
*note - if you have problems with apps malfunctioning due to changed DPI, just erase that app's data and reboot
20140503
- RR synced with latest 5.4.3 / LP 5.1.1 / CM 12.1 commits
- (kernel) XZ Kernel compression
- (kernel) Kernel now compiled with latest Linaro ARM-optimized toolchain, using -O3 and other optimization flags (credits: @Christopher83)
- (kernel) Much logspam taken down
- (kernel) Switched prima to another CAF source
- (kernel) kgsl patches from mako for graphics improvement
- (kernel) Added new ARM-optimized SHA2 encryption
- (kernel) Removed a lot of unneeded CPU governors
- (kernel/ROM) Reverted to Intelli-Thermal not being a default thermal manager
- (ROM/GPS) Now using Google's NTP server (time1.google.com) instead of gpsonextra.net's
20150507
- RR updated to 5.4.4
- RR/CM/LP synced with latest (05/07) commits
- (device/GPS) Use slightly modified gps.conf
- (device/ROM) Out-of-the-box init.d hopefully fixed
- (device/Telephony) Updated RIL libraries
- (ROM/sepolicy) Some denial fixes
- (kernel) Added FSync Control
- (kernel) Added s2w
- (kernel) Many improvement and optimization patches related to many kernel aspects, like: CPU Frequency regulation driver/governors, SMP, Filesystem, I/O, GPU drivers (2D and 3D), Wireless and more
Build 20150507 Direct download
20150511
- RR oficially updated to 5.4.4
- RR/CM/LP sources synced with latest commits
- (ROM) ( finally ) Fixed native init.d support
- (ROM) Temporarily reverted the Gesture Lockscreen patch (should fix frozen lockscreen issue when dt2w is on)
- (kernel/CPU) Disabled multi-core power savings by default
- (kernel/GPU) Disabled GPU overclock (should fix heat/frequency throttle/lag on high-demanding 3D apps/games)
- (kernel/modem) Fixed delayed carrier registration / SIM activation on boot
- (kernel/fs) Updated f2fs driver
- (kernel/log) Reduced some log output
Build 20150511 Direct download
20150515
- RR/CM/LP sources synced with latest commits
- (ROM) Small fixes for init.d support
- (kernel) Disable some unneeded drivers, modules, etc. This will reduce the ROM boot time
- (kernel) Enable dynamic & async FSYNC
- (kernel) Optimize memcpy for Cortex-A15
- (kernel) Add support for TCP Small Queues and TCP Automatic Corking
Build 20150515 Direct download
20150520
- RR updated to 5.4.5
- LP updated to 5.1.1_r2
- RR/CM/LP sources synced with latest commits (05/20)
- (kernel) Updated S2W/DT2W code
- (kernel) Decreased the lowest minimum brightness
- (kernel) Disabled some unneeded drivers, modules, etc.
- (kernel) Added some optimization flags to Makefile
Build 20150520 AFH Download
20150525
- LP updated to 5.1.1_r3
- RR/CM/LP sources synced with latest commits (05/25)
- (ROM) Reverted some erroneous code for setting charging/notification LED color.
- (ROM/device) Hopefully fixed external storage (USB OTG) - not yet tested due to lack of needed hardware.
- (kernel) Imported the shiny new bootlogo from Sony stock LP FW.
- (kernel) Switched to -Ofast instead of -O3 build optimization flag.
- (kernel) Rewrote the algorithm for decreasing the value of Auto Brightness. See here for details/how-to.
- (kernel) Made all remaining kernel modules built-in.
Build 20150525 AFH Download
20150530
- RR updated to 5.4.6
- RR/CM/LP sources synced with latest commits (05/30)
- (ROM/device) Adreno: changed blobs from Mako to Sony (.454)
- (ROM) Fixed setting Vibration Intensity in RR settings
- (kernel) Added support for storage with NTFS/FAT FS and refined support for VFAT/exFAT ones
- (kernel) Reverted patch for Sharp panel's gamma calibration
- (kernel) Removed FSync/Asynchronous FSync/Dynamic Fsync Control
- (kernel) Removed buggy and dated intellidemand governor.
- (kernel) Modified code of the end of the procedures to ARMv6+ recommendations. More about this here
Build 20150530 AFH Download
20150608
- RR/CM/LP sources synced with latest commits (06/08)
- (kernel) merged .454 kernel sources
- (kernel) switched to stock adreno driver to improve compatibility with .454 adreno blobs
- (kernel) CPU governor cleanup
- (kernel) added Sioplus I/O scheduler, updated Zen to v2
- (kernel) removed Simple GPU Governor due to incompatibility with new driver
- (kernel) introducing new simplified thermal driver
- (kernel) introducing new hotplug, apq_hotplug
Build 20150608 AFH Download
20150611
- RR updated to 5.4.7
- (kernel) fixed thermal driver & CPU OC: now there's proper setting/restoring of maximum (OC and non-OC) CPU frequency
- (kernel) updated apq_hotplug driver
Build 20150611 AFH Download
20150616
- (ROM) RR/CM/LP sources synced with latest (06/16) commits
- (kernel) updated to reworked and fixed apq_hotplug driver (Thanks @Tommy-Geenexus)
- (kernel) introduce Power Efficient CPU Workqueue
- (kernel) updated BFQ I/O scheduler
- (kernel) improvement patches in various areas
Build 20150616 AFH Download
20150618
- (ROM) RR/CM/LP sources synced with latest (06/18) commits
- (kernel) changed toolchain to SaberMod 5.1.1
- (kernel) reverted back to AutoSMP hotplug
- (kernel) added GPU OC and UV
- (kernel) Makefile: added OpenMP support
- (kernel) some other improvements; interested folks can always check out github
build 20150618 AFH Download
20150623
- RR updated to 5.4.8
- (ROM) RR/CM/LP sources synced with latest (06/23) commits
- (kernel) updated to Linux 3.4.108
- (kernel) fixed restoring of max freq after sleep
- (kernel) Makefile: added cache info
- (kernel) Makefile: enabled the memory leak detector sanitizer
- (kernel) various improvements, check github for details
build 20150623 AFH Download
20150624
- (ROM) RR/CM/LP sources synced with latest (06/24) commits
- (ROM) made some ramdisk optimization
- (kernel) encreased reboot speed by disabling modem ramdumps
- (kernel) disabled AutoSMP
- (kernel) disabled apq_hotplug
- (kernel) enabled msm-sleeper 4.0 (CPU hotplug driver)
- (kernel) added fsync on/off support
- (kernel) fixed restoring of max freq after sleep/thermal throttling after moving to msm-sleeper 4.0
- (kernel) various improvements, check github for details
Build 20150624 AFH Download
20150708
- RR 5.5.0
changes:
ROM: https://gist.github.com/westcripp/8874051
Kernel: https://github.com/airlessproject/kernel_apq8064
Build 20150708 AFH Download
20150906
- RR 5.5.5
changes:
ROM: https://gist.github.com/westcripp/8874051
Kernel: https://github.com/airlessproject/kernel_apq8064
Build 20150907 AFH Download
Known Bugs:
ROM/device Issues
- Live Display optimization slows down graphics performance. Turn it off in Settings->Display. Use Gamma/kcal control if you need to calibrate screen colors.
Recovery Issues
- Common CM recovery issues
Kernel Issues
- f2fs-formatted /data and /cache can sometimes cause a small delay before boot animation, but this doesn't negatively affect ROM performance after a boot has been completed.
Other (RR/CM/misc)
- Users sometimes get a black screen followed by a UI restart and return to lock screen. This is apparently present in all CM-based ROMs and currently nothing much can be done about it.
- Logcat is currently not working due to Logd hanging ROM boot because of sepolicy denials. Fixing this is work in progress.
- Minor app issues (not ROM/device related)
- Common RR / LP 5.1.x / CM 12.1 issues
Kernel:
Since build 20150424 the kernel used with this ROM is based on a mix of KMA and EvoMix kernels, updated with my own work with the unselfish help and time devoted into this by @BrateloSlava.
Sources to that are here.
Until then the kernel used was EvoMix, whose sources can be found here.
Special thanks to:
Code:
[B]Alex, Oli & Joe[/B] (Team VALIDUS, AOSPAL, OmniROM, TeamEOS,
Tesla Project) for kindly providing and improving the source code for
the kernel and device trees.
XDA:DevDB Information
Resurrection Remix Unofficial, ROM for the Sony Xperia Z
Contributors
airlessproject, @Alx31TLse, westcrip, @BrateloSlava
Source Code: https://github.com/ResurrectionRemix
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Unlocked Bootloader
Based On: CyanogenMod, AOSP
Version Information
Status: Testing
Current Beta Version: 5.5.5
Beta Release Date: 2015-09-07
Created 2015-04-06
Last Updated 2015-09-07

Some Screenshots by the author
My own screenshots in DevDB

Reserved

Really love this ROM!!! AWESOME ROM EVER for me.. BTW Thanks for ur work Bro..

BohArie said:
Really love this ROM!!! AWESOME ROM EVER for me.. BTW Thanks for ur work Bro..
Click to expand...
Click to collapse
welcome
Feel free to report how it's gonna work for you

airlessproject said:
welcome
Feel free to report how it's gonna work for you
Click to expand...
Click to collapse
Sure bro, So far so good.. no harm done.. battery life is good too.. Charging yesterday at 9.00 am.. been using it with wifi on almost 24 hour now.. battery drop at 50%..

@airlessproject :
So nice!
I see at OP: ROM Kernel: Linux 3.0.x
Is that right?

uncomment said:
@airlessproject :
So nice!
I see at OP: ROM Kernel: Linux 3.0.x
Is that right?
Click to expand...
Click to collapse
Bad choice from dropdown menu corrected to 3.4.x
EvoMix is 3.4.0 as seen here: http://forum.xda-developers.com/attachment.php?attachmentid=3247676&stc=1&d=1428299007
Thanks for noticing!

nice thread

Alx31TLse said:
nice thread
Click to expand...
Click to collapse
Yea, but it wouldn't exist tho without your help and previous work on this :highfive:

anytime man...open sources+share FTW =)

Just downloading and flashing... can't wait to see the results!

One thing I'm curious about, where did the use of a circular button with an X in it instead of the three staggered lines for close all in recents originate?
I'm seeing that in more and more ROMs, in terms of size it looks about right on my 10.1" tablet but strikes me as a little large on a phone. It would be nice to be able to theme it back to the three lines.

@Nameless One simply install a CM12 theme that changes the icon.

Nameless One said:
One thing I'm curious about, where did the use of a circular button with an X in it instead of the three staggered lines for close all in recents originate?
Click to expand...
Click to collapse
It seems to have originated here: https://android.googlesource.com/platform/frameworks/base/+/2915b9d as a part of the Lollipop framework.
I think @golfgtiedition30 's solution is the only way to change it at the moment.

airlessproject said:
Bad choice from dropdown menu corrected to 3.4.x
EvoMix is 3.4.0 as seen here: http://forum.xda-developers.com/attachment.php?attachmentid=3247676&stc=1&d=1428299007
Thanks for noticing!
Click to expand...
Click to collapse
Really nice on ur screenshot.. how to make it transparent tho??

BohArie said:
Really nice on ur screenshot.. how to make it transparent tho??
Click to expand...
Click to collapse
Just search "CM12 Theme transparent" on Play Store.. few themes will pop up.. but beware as the new CM theming system is in early stages of development and bugs and unexpected things can happen, bootloops being the worst.

Thanks
U mean we can change system setting theme room?
Can u prepare a stock system ui?

mostafaz said:
Thanks
U mean we can change system setting theme room?
Can u prepare a stock system ui?
Click to expand...
Click to collapse
Didn't quite get you (I'm not a themer to be able to prepare UIs) but if you mean getting Sony Xperia stock look and feel on this ROM, try searching "xperia cm12" on the same store
There are a few paid but also some free themes.. try as you wish..

airlessproject said:
Just search "CM12 Theme transparent" on Play Store.. few themes will pop up.. but beware as the new CM theming system is in early stages of development and bugs and unexpected things can happen, bootloops being the worst.
Click to expand...
Click to collapse
Great.. thanks a lot bro..

LineageOS 15.1 (Android 8.1.0) for S7 Edge build 53 18.20.2020.

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS 15.1 for hero2lte
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Working:
- Camera
- Camcorder
- Wifi
- Sound
- mali drivers
- USB tethering
- Video Playback
- Fingerprint Sensor
- Ril (Mobile data,calls, sms and stuff)
- Sensors
- Buttons and their backlight
- Bluetooth
- Wifi HotSpot
- MTP
- 2D and 3D gpu acceleration
- Stuff I didn't test yet
- HW encoding/decoding
- Charging with device powered off
- HWcomposer (HWC)
- GPS
- Screen cast
- Bluetooth in call audio
Not working
-
DO NOT POST BUG REPORTS WITHOUT LOGCAT OR STEPS TO REPRODUCE BUG
(some bugs also require dmesg and/or (last_)kmsg and/or /data/tombstones/*)
Install gapps right after installing the rom itself dont try to boot to system before that
Downloads:
Google Drive
Mega.nz
MD5: 1a864a2487da8df0bcf18f28d17afe88
OpenGapps
MindTheGapps
Root
15.0 Build and gapps
WARNING THOSE BUILD HAVE BUGS AND SHOULD NOT BE USED, THEY ARE HERE JUST FOR REFERENCE
Mega.nz
Google Drive
MD5: 3862B94FDE06F4DF904CBF502B210940
gapps:OpenGapps
If you can't boot phone up after installing OpenGapps please use A-GAPPS
I do this in my free time so bear that in mind when you notice I didn't fix known bug in next available build, Currently i work on this alone and i am not one of those kangers that just copy source and claim it as their own work,
if you want to support the project feel free to buy me some coffee paypal.me/ivanmeler
Feel free to join telegram group with early builds progress updates and some off topic stuff Join
Based On Android 8.1.0 Oreo
Changelog
18.02.2020.
- Merged february 2020 security update
- Synced with LOS source
03.12.2019.
- Merged december security update
- Misc performance and stability updates
13.06.2019.
- upstreamed kernel to 3.18.140
- Updated to June 2019 security update
- Updated to May 2019 vendor (samsung side) security update
- bsp side performance updates
30.04.2019.
- Updated kernel to 3.18.138
- Synced with april security update
- Enabled quota support on /data partition
- Synced with LOS source
17.03.2019.
- Updated to march security pattch
- Added aptx and aptxhd codecs for bt audio
- Added HealthServices and permissions (Heart rate monitor is reported by the app now but it still needs to be granted missing permissions
Ill resolve issues with that in next release hopefully)
- Misc performance and stability updates
- Synced with los source
04.03.2019.
- Merged February security update related to samsung source
- Added 2 more missing macloader mappings
(if you continue having issues send me first half of /efs/wifi/.mac.info)
- Fixed Bluetooth issues introduced with february security update
(if you continue having issues send me first half of /efs/bluetooth/bt_addr)
- merged FXXU3ERL3 source to kernel
- Updated kernel to 3.18.136
- Misc performance and stability updates
- Synced with LOS source
13.02.2019.
- Updated kernel to 3.18.134
- merged February 2019. security update
- Added another missing mac oui
*(If you are still having wifi issues send me first half of your /efs/wifi/.mac.info)
- Audio: Improved handling of ril_set_call_clock_sync which would mute calls on some devices
- Audio: Resolved issues where there was race condition when connected to bt listening to navigation and recieving a call would cause call to be muted
- Audio: Fixed call recording (Use external app from play store, Ive tested "Automatic Call Recorder" and it was working fine)
- Audio: Fixed voip over BT headset
- Audio: Fixed audioserver crash on in_get_capture_position()
- Audio : Misc cleanup and stability improvements
- General performance and stability improvements
03.02.2019.
- Updated list of mac addresses
* If you are still having issues send me first half of /efs/wifi/.mac.info, I need it for OUI lookup
- Synced with LOS source
21.01.2019.
- Updated kernel to 3.18.132
- Bumped vendor security level to january
- Added mapping for more mac addresses
*If you are still having issues send me first half of /efs/wifi/.mac.info, I need it for OUI lookup
You shouldnt have any privacy concerns as first half is used to identify wifi chip manufacturer
and this is really only way to handle it (https://en.wikipedia.org/wiki/Organizationally_unique_identifier)
- Misc performance and stability updates
- Synced with los source
10.01.2019.
- Removed old bluetooth and wifi firmwares
- Upstreamed kernel to 3.81.131
- Resolved issue where battery would drop on reboot/shutdown due to max capacity from kernel not being saved in system
- Moved wifi related configs to /data/misc/conn/ from /data/ to comply with new kernel
- Resolved issue where some wifi chips wouldnt gether right firmware on bootup
- Synced with LOS source
20.12.2018.
- Updated vendor blobs to December security patch (FXXU3ERL3)
- Added Sim Toolkit app by default
- Synced with LOS source
13.12.2018.
- Updated kernel to 3.18.128
- Merged XXU3ERJE samsung kernel source
- Added double tap to wake (Can be disabled from settings->Display)
- Moved doze to Settings->Display from main settings page
- Merged December security update
- General performance and stability improvements
- Synced with LOS source
30.11.2018.
- Updated kernel to 3.18.127
- Added missing mac address for new revisions of s7 that had weak signal due to missing mapping
- Synced with LOS source
21.11.2018.
- Updated kernel to 3.18.125
- Fixed potentional crash while in call
- Improved WBS bt handling
- Imported Novender security update blobs from samsung (ril, should imrpove its stability and battery life a bit)
- Synced with LOS source
09.11.2018.
- Merged november security update
- Resolved bluetooth in call audio issues
- fixed issue where NFC wouldn't turn on after being off for too long
- Misc stability and performance improvements
- Synced with LOS source
05.11.2018.
- Imported XXU3ERJ3 vendor blobs
(Camera, OMX, RIL)
- Fixed Emergency Alerts
- Updated Service Provider Name list
- Added thermal hal
- Misc stability and performance improvements
- Synced with LOS source
23.10.2018.
- Resolved issues with USB audio input and output devices
- Moved gps xtra server config to overlay (faster lock time on gps)
- Updated Service provider name list
- Updated to newest vendor security patch (FXXS3ERJ2/October 2018) (ril,camera,gps,wifi/bt.)
- Synced with LOS source
15.10.2018.
- Updated to linux kernel 3.18.124
- Cleaned up kernel source
- General performance and stability improvements
- Synced with LOS source
08.10.2018.
- Resolved call audio quality issues
- Synced with los source
04.10.2018.
- Updated mali drivers to R22P0 from R12P0
* This should improve graphics performance, stability and battery life
- Updated OMX libraries
- Updated gralloc
- Updated camera libraries to oreo
* This drastically improves image quality in proper light conditions
- Removed BT WBS flag that forced it into wideband speach mode
* If you are still having issues with nt calls try setting
audio_hal.force_voice_config=wide or audio_hal.force_voice_config=narrow
in build.prop
- Updated all of the other prebuilt libraries to oreo ones
- Resolved issues where camera wouldnt take video in some apps (gcam)
- General stability, security and performance improvements
- Removed unused prebuilt binaries
- Removed all of the shims that became deprecated due to switch to oreo blobs
- removed camera wrapper (new camera hal works out of the box without manipulation)
- Synced with LOS source
- Take a not that this build also has a lot of changes under the hood that
drastically improve its stability and performance
27.09.2018.
- Updated kernel to 3.18.123
- Disabled force WBS for bluetooth calls (should improve bt calls compatibility with some devices)
- Synced with los source
18.09.2018.
- Upstreamed linux kernel to 3.18.122
- Security updates
- Synced with LOS Source
09.09.2018.
- Updated kernel to 3.18.121
- September security patch merged
- Adjusted Auto brightness values
- Enabled HW mpeg2 decoder (In case app developers really feel like using it)
- Synced with LOS source
29.08.2018
- Merged linux 3.18.120
- Merged new smasung kernel drop ERH1
- Fixed issues on some devices with murata samsung wifi chip (if you are still having issues with low signal send me first half of phones mac address)
- Synced with LOS source
28.08.2018.
- Updated kernel to 3.18.119
- Fixed issues where live display wouldnt persist after locking the device
- Fixed issues with CTS props
- Updated media profiles (OMX performance)
- Reimplemeted color calibration and sunlight enhancements
- Misc stability and performance improvements (See git)
- Synced with los source
20.08.2018.
- Switched to simplified camera wrapper (This will help with camera stability and it will be easier for me to trace down which flags are causing quality issues)
- Updated build fingerprint and description (safetynet)
- Removed flag that enabled ADB by default
- Builds are now signed (No more test keys, and it also makes them more secure as it prevents non signed builds to be installed on top)
- Misc changes (Stability and performance improvements)
- Synced with LOS source
11.08.2018.
- Updated libion memory management
- Removed config that was confliciting with 5GHz wifi networks
- Switched to auto generated hidl manifest
- Removed broken livedisplay implementation (Falls back to aosp one now)
- Merged August Security Patch
- Synced with LOS source
05.08.2018.
- Updated WiFi firmware
- Updated Audio firmware
- Updated Bluetooth Firmware
- More screen cast imporvements
- Updated APN list
- Enabled BT WBS by default
- Enabled BT LE mode
- Switched to 16kHz WBS profile
- Fixed MMS Profiles
- Fixed bug where some UI elements would show that FP sensor is on the back of the device
- LiveDisplay improvements
- Synced with LOS source
04.08.2018.
- Fixed Wireless display (Screen mirroring)
- Fixed Operator name displaying as numbers for some users
- Fixed support for NV12 YUV Pixel format support
- Synced with LOS source
02.08.2018.
- Updated to ERG2 kernel sources
- Imrpoved stability battery life and it shouldnt overheat anymore
- Updated NFC drivers
- This should resolve all remaining nfc issues that were present for some users
- Synced with LOS source
01.08.2018.
- Completely swapped kernel to a new base (ERF4) and upstreamed to 3.18.91
- No more random reboots (No matter which gapps you use either)
- general stability improvements
- performance improvements
- battery life improvements
- Added new mac ranges to macloader algiorithm
- This will ensure people that had weak wifi signal will have better reception as their chip
will get properly detected (If you are still having issues with wifi range feel free to reach me
in PM ill need first half of phones mac address)
- Switched to oreo ril blobs
- This will improve signal strenght
- Battery life
- General ril stack stability (voice/data/sms)
- Fixed Drm content
- New version of netflix app will work so will apps that depend on it
- Added nfc wrapper (this should help with nfc stability)
- Removed kernel is not seandroid enforcing warning
- Fixed GPS
- Updated all of the gps and sensor blobs to ones from oreo ERF4
- This wont help you locate nearby seals tho, they dont want to be seen and will keep hidding from gps
- Synced with LOS source
31.05.2018.
- Added auto build fingerprint/description fixup function (This can replace safetynet fix) (Only works with OREO bootloader)
- Enabled SdcardFS (Improves flash memory read/write speeds, Not only sdcard)
- Revamped audio hal (Stability imporvements with audio/bt audio)
- Added custom livedisplay that looks better than previous one
- Stability improvements
- Synced with LOS source
23.04.2018.
- Updated mali driver prop to 3.20 to advertise new apis and vulkan properly
- Removed AudioFX (It was broken on all non qcom devices)
- Improved sound quality on speaker and earphones
- Switched to local APN list (This should solve issues where some users had to manually sellect their APN)
- Added auto detection in BT settings for device name so flat builds dont show as s7 edge on bluetooth as default anymore, they get properly identified as s7 flat now
- Synced with LOS source
11.04.2018.
- Updated sensor blobs
- Enabled and fixed WiFI display support (miracast,samsung smart tv and such)
- Fixed bug where touch would stay active in call
- Synced with LOS source
07.04.2018.
- Updated OMX blobs
- Switched to prebuilt libExynosOMX_Core and libExynosOMX_Resourcemanager (Should resolve issues where yt audio would start without video and decrease a chance of framedrops)
- Enabled OMX
- switched to open source implementations of :
gralloc
libexynosscaler
libexynosgscaler
libexynosv4l2
(...Insert more changes here...)
- Switched to new (private) BSP source, This should improve general system performance and stability
- Fixed HWC (Improved performance of UI since it uses gpu for it which also improves battery life)
- Synced with LOS source
- Misch changes and improvements (Sorry too lazy for changelog as this build just includes too many changes, Ill try to list them here soon)
28.03.2018.
- Improved stability of front camera in stock camera app
- Stability and performance improvements
- Synced with LineageOS source
26.03.2018.
- Switched to a new camera app
- Added 4k recording profiles for other camera apps
- Stability improvements
- Synced with LOS source
20.03.2018.
- Fixed issues introduced in previous build
19.03.2018.
- Fixed key configuration
- Switched adb to FlashFS interface from legacy
- Fixed issues with accelerometer auto rotation
- even more OMX improvements
- synced kernel defconfig with android-3.18-o-mr1 recommended config
- Improvements to fingerprint sensor hal
- audio and ril improvements (Microphone wont get muted in call anymore) and ril hal has been cleaned up
- Resolved out of memory issues with dalvik/art config which caused around 99% of random reboots
(Note biggest gapps you should ever use with rom are micro there are issues with gapps themselves)
- enabled and fixed sdcardfs (This should improve internal storage rw speed)
04.03.2018.
- Added samsungs sdfat filesystem to support exFAT formated sd cards
03.03.2018.
- Fixed charging with device powered off
- Resolved conflcts with OpenGapps
- Added support for korean device variants
- Improved stability of OMX
- NFC chip firmware now updates to latest provided firmware from drivers
- Imrpovements to audio and ril hal (Check my github if you really want to know)
- system partition now mounts early in boot proces (Should speed up boot a bit)
- Fixed delay when turning on torch
- Fingerpeint sensor doesnt look for fingerprint while screen is off anymore(Moar battery and it was unreliable
- Synced with LOS source
22.02.2018.
- Fixed HW encoding/decoding (finally)
- Fixed most of the remaining random reboot issues
- Updated media profiles and codecs config (More file formats should play now)
- Synced with LOS source
14.02.2018.
- fixed apn for MMS on some dual apn carriers
- Boosted micrphone volume
- Moved from staging/lineage-15.1 to stable branch
- Added lineage overlays for dark UI
- Synced with los source
01.02.2018
- Fixed hardware compass
- added back some HRM sensor permissions
- Added toggle for button backlight
- Fixed key disabler reseting after reboot
- Merged latest LOS source
22.01.2018.
- Audio and bluetooth hal imporovements
- Fixed LED notification light on charging and other events
- Fixed vibrator intensity changing
- Added smart dimming aka Flicker free mode to kernel ( use "echo 1 > /sys/class/lcd/panel/smart_on" to enable it, its disabled by default)
- Added advanced reboot
- Added button settings and button disabled
- Synced with LOS source (Quite a few new features have been added to LOS since last update)
09.01.2018.
- Improvements to bluetooth and audio hal
- Synced with LOS source
02.01.2018.
- Synced with LOS source (few new features are implemented to LOS)
- stability improvements
- Switched to linaro for kernel toolchain
- Misc updates and fixes
16.12.2017.
- Fixed random reboots that were present during first boot
- Enabled home button wakeup
- Added more advanced version of the doze
- Misc stability improvements
11.12.2017.
- Switched to staging/lineage-15.1 branch
- Updated device source to work with 8.1
- Fixed sensor issues 8.1 introduced
- Fixed video playback in portrait modei n stock gallery app
- Misc changes and bug fixes
2.12.2017.
- Fixed all graphical glitches that were present in UI elements (Should also fix setup wiz. in some cases)
- Updates to FP hal
- Device tree cleaned up a bit
- Enabled LTE menu when selecting network type
- Misc changes and improvements
27.11.2017.
- Enabled home button wakeup
- APK's can now be installed from stock file manager
- Fixed ril on Dual sim devices (G93*FD)
- Fixed bug where some apps couldnt access internal storage (Messenger,whtsapp,instagram)
- Misc changes and improvements to general system stability
26.11.2017.
- Fixed senors
- Fixed ril
- Misc changes (See git)
25.11.2017.
- First public release
XDA:DevDB Information
LineageOS 15.1 (Android 8.1.0) for S7 Edge, ROM for the Samsung Galaxy S7 Edge
Contributors
Ivan_Meler
Source Code: https://github.com/ivanmeler/android_kernel_samsung_herolte
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
Version Information
Status: Stable
Current Stable Version: 1.0.R
Stable Release Date: 2020-02-18
Created 2017-11-25
Last Updated 2020-02-18

Reserved
More screenshots https://imgur.com/a/jm5mR Enjoy

Nice work! Thanks

will there be future compilations for the G930F?

NCG-natsu said:
will there be future compilations for the G930F?
Click to expand...
Click to collapse
https://forum.xda-developers.com/galaxy-s7/development/lineageos-15-android-8-0-0-herolte-t3710107#
Sure thing

Is it just me or are the links not working?
Sorry I had adblocker on.

Duck4Cover said:
Is it just me or are the links not working?
Sorry I had adblocker on.
Click to expand...
Click to collapse
Adblock shouldnt have any influence on links, They go directly to google driver/mega

Ivan_Meler said:
Adblock shouldnt have any influence on links, They go directly to google driver/mega
Click to expand...
Click to collapse
It did for some reason. As soon as I turned it off it sorted it.

Awesome work. Error in reading the simcard

peur said:
Awesome work. Error in reading the simcard
Click to expand...
Click to collapse
+1 Same Issue here

shafi31 said:
+1 Same Issue here
Click to expand...
Click to collapse
same here

peur said:
Awesome work. Error in reading the simcard
Click to expand...
Click to collapse
shafi31 said:
+1 Same Issue here
Click to expand...
Click to collapse
majinawaz said:
same here
Click to expand...
Click to collapse
3 of you can read and use google right? Because it seams like you cant do either of those 2 things i am sorry for saying this but come on..
Fir of all right in the bug list what is the first thing you can see?
Not working
- Ril
Dont know what ril is? SImple enough google "What is ril" and find wikipedia article https://en.wikipedia.org/wiki/Radio_Interface_Layer
Oh and other than that i also said something else in OP
DO NOT POST BUG REPORTS WITHOUT LOGCAT OR STEPS TO REPRODUCE BUG
Thank you for not reading OP..

The f*ckin hero you are bro.

On top of already reported:
BT media works
GPS works
Cast works
MTP works
NFC works
LED workd
Capacitive buttons works
Some graphical glitches, but in general smooth,especially in this stage of development.
Good job.
Sent from my SM-G935F using Tapatalk

Ivan_Meler said:
Thank you for not reading OP..
Click to expand...
Click to collapse
That is too funny!!!!

Quick progress update, Fixed issues with rotation sensor and stuff, Still working on ril

Waiting for RIL, ready to test, good work!

Amazing to see oreo roms for the s7 family
Thank you brother, Really! U are the hero of herolte and hero2lte xD
@Ivan_Meler
I made a video about this rom including the installation instructions you can add it to the thread if you want
https://youtu.be/38_oeq-ZYb8

Oh bro Thanks you for your work this is amazing, Good Job <3
Enviado desde mi SM-G955F mediante Tapatalk

Ehm kinda big news here..

[TESTING][NOUGAT] LineageOS 14.1 and other LineageOS-Based Custom ROM's for HERMES

I'm Not even a developer, but a builder bot
Here is a collection of LineageOS 14.1 and other LineageOS 14.1-based Custom ROMS, these Custom are Compiled from me with the source tree of @Dinolek.
His Device Tree uses MIUI lolipop blobs instead of marshmallow alps blobs which we used for Marshmallow before.
------------------------------------------------------------------------------------------------------------------------
Working :
* Adjustable brightness
* Audio
* Auto brightness
* MTP and Mass Storage modes
* Vibration
* Rotation
* RIL
* Video
* Gallery
* Mic
* Wi-Fi
* Bluetooth
* Internet
* GPS
* Hotspot
* Camera rear/front
* SD Card
* IR Blaster
* Built-in Signature Spoofing (for MicroG)
-----------------------------------------------------------------------------------------------------------------------
Broken/Bugs :
* Camera rear/front while trying to record video from stock camera (but you can record from other camera apps too)
* SafetyNet passes only with Offical Kernel source from Micode
------------------------------------------------------------------------------------------------------------------------
I this link I have included these Custom ROMS:
- LineageOS 14.1
- DotOS 1.2
- ViperOS 3.1.1
- Dirty Unicorns 11.7.2 (AOSP-Based, experimental)
- RR 5.8.5
- crDroid
Download Link: https://mega.nz/#F!0ZgiDaCS!1qISJ4mb9jWnA1W2vfUJcg
Source Trees:
Device Tree:
https://github.com/Azizb750/android_device_xiaomi_hermes
Vendor Tree:
https://github.com/Azizb750/android_vendor_xiaomi_hermes
Kernel Tree:
Official: https://github.com/Micode/Xiaomi_Kernel_OpenSource
Upstreamed: https://github.com/Azizb750/Xiaomi_Kernel_OpenSource
Credits:
@Dinolek for his source tree (don't worry I have already took his permission before)
@Smosia for his new hennessy tree and his fixes
@nofearnohappy
@lokjianming
@danielpinto8zz6
@andrea210701
@l7ssha
@Syl157
@daniel_hk (for his updated gps hal)
@ibilux (for his help to fix the bugs)
MiCode for Publishing Finally the hermes/hennessy kernel source!
Thanks to these developers/maintainers for making our device still alive!
NOTE: The ROM's are not fully stable, So I'm not responsible for the bugs which will occur later
_______________________________________________
Troubleshooting
- Some apps are crashing for a reason what's wrong?
- if you use Magisk root some apps are crashing for a reason, to solve this change Mount NameSpace Mode to Global and disable Magisk Hide and reboot (you cn re-enable it later if you want/need it),
I discovered this solution when I used older RR N 5.8.2 and the apps will not crash anymore, another way is to set ro.debuggable to 1 using MagiskHide Props Config module and reboot. But now the custom kernel is not causing this bug anymore, but in case you will meed it.
- SafetyNet fails what to do?
- If you fail Only CTSProfile, you can use this module
https://forum.xda-developers.com/apps/magisk/module-magiskhide-props-config-t3789228
This will help you to Pass CTSProfile using custom build fingerprint from other certified devices.
If you use xposed and want to pass CTSProfile, you can use an xposed module called "No Device Check", but as far I know its impossible to pass BasicIntegrity with xposed installed, but using this module is pretty enough to log in via snapchat and using some apps but not for Pokemon GO
Edit: SafetyNet was failing due of kernel, the kernel source from Micode (or from mine upstreamed) passes it.
-what's MicroG?
- MicroG is an lightweight and opensource re-implementation of Gapps
- how do I install it?
- same as Gapps + you will need to wipe cache/dalvik and grant for signature spoofing
- In self check I see that Phonesky/Play Store has not correct signature, why does it happen?
- you need to grant for signature spoofing manually you can do it by going to Settings->Apps->Gear(in top right corner)->App Permissions-> Spoof package signature/(or signature spoofing, depends on the rom) and giving permissions to spoof signature, you can do the same to GMSCore too in case you did still haven't granted for it before
- I have problems with sign in with my account, what to do?
- this happens mostly when you are Replacing Gapps with MicroG or reinstalling MicroG without sign out, if this happened just go and delete using root explorer this files:
/data/system_ce/0/accounts_ce.db
/data/system_de/0/accounts_de.db
/data/system/sync/accounts.xml and reboot, and now you should have sign in to your account successfully
_______________________________________________
Link for MicroG(ale5000): https://forum.xda-developers.com/android/development/microg-unofficial-installer-t3432360
Link for MicroG(nanodroid): https://forum.xda-developers.com/apps/magisk/module-nanomod-5-0-20170405-microg-t3584928
_______________________________________________
Changelog:
-----------------
25082018 (except DirtyUnicorns and LineageOS*)/26082018 (for DotOS)
- Fixed GPS (credit: @daniel_hk, thanks to @ibilux)
- intergrated V1.P2 modem
* Some Users reported that LineageOS 14.1 2508 does not even boot, so I dropped it temporary
-----------------
27082018 (DotOS and RR)
- integrated Audio fix
- Added some init.mt6795.rc tweaks
- Added some new flags on BoardConfig.mk
-----------------
28082018 (LOS, DotOS and RR)
- same as 27082018 + took some .conf files from MIUI 9.6.3.0 and Disabled HW overlays Permanently
-----------------
29082018 (LOS, DotOS and RR)
Dropped as some users reported Bootloops
You can Download 2808 build instead
-----------------
01092018 (LOS, DotOS and RR)
- Added some lines in ramdisk (for video recording)
- updated BoardConfig.mk
- added new keylayout (Thanks ARTEM)
- added new tweaks in build.prop for [email protected] (thanks @ibilux for help) and removed init.d script
-----------------
03092018 (ViperOS)
- Added some lines in ramdisk (for video recording)
- updated BoardConfig.mk
- added new keylayout (Thanks ARTEM)
- added new tweaks in build.prop for [email protected] (thanks @ibilux for help) and removed init.d script
- edited build.prop to make it debuggable
-----------------
04092018 (LOS, ViperOS, DotOS, RR and crDroid)
- added some lines in ramdisk
- fixed bootloop (on 03092018 ViperOS)
------------------
06092018 (LOS, ViperOS, DotOS, RR and crDroid)
- Patched for built-in signature spoofing support for MicroG (LOS, RR and DotOS only, crDroid and ViperOS have already native support for it)
- tried to fix wakelock issues while playing music
------------------
13092018 (LOS, RR, DotOS, ViperOS and crDroid)
- tried to fix colors on camera (for video recording)
- fixed some codecs (not playing flac files)
------------------
22092018 (RR with custom kernel)
Not working:
Audio (trytofixcamera.zip from older RR may solve the problem)
touch atmel
most of sensors
camera
------------------
01102018 (eelo 0.1)
- First release
- used FM libs from @Smosia's tree (thanks @Dinolek for fixing FM and @Smosia for providing them)
- made some changes in ramdisk (init.mt6795.rc only, if you want spectrum support you can flash it by using a seperate zip)
------------------
07102018 (LOS, RR, ViperOS, DotOS)
- fixed FM Radio for sure now (thanks @Smosia and @ibilux)
- used folders from auroraroms device tree so can compile them from source (credits: )
- added camera_wrapper from @daniel_hk's tree
------------------
17102018 (LOS, RR and crDroid)
- updated some patches and some BoardConfig in the device tree (thanks @Smosia and @Dinolek)
· updated and applied newer patch to disable seccomp filtering (Credit: @Dinolek)
· updated and applied newer patch for hotspot (Credit: @Dinolek)
· applied patch to fix airplane mode bug (thanks @Smosia to adding it to the tree)
- black screen seems to be fixed this time (probably it occured due that forgot to add an flag about seccomp in BoardConfig as it was essential to disable seccomp filtering)
------------------
20/21/22/23/26/27/28102018
- reverted camera_wrapper (it makes things worse about screen recording)
all compiled by @dargonswim
------------------
05/06012019
(05012019 crDroid and ViperOS
06012019 LineageOS, DotOS and RR)
- Moved device-specific libs to Vendor as Part of preparations for Oreo and Pie(Credits: @Dinolek for doing it and @Smosia providing the tree)
- fixed triggering ringtone (credits: @Smosia)
- added a expermintal flag during compilation for VideoRecording bug (thanks: @ibilux)
------------------
16012019 (Ghost Kernel0.1)
- Source from Official Xiaomi Open Source
- everything works well
- Upstreamed kernel to 3.10.108
- added dt2w (on Focaltech only)
- Patched for oreo Binders
- Passes BasicIntegrity (Now is possible to pass CTSProfile with custom fingerprints)
------------------
18012019 (for LOS, RR and DotOS, 19012019 for CrDroid and ViperOS)
- kernel from source (thanks xiaomi for releasing kernel source)
- Upgrade Sepolicy 30
- merged some camera fixes (thanks @Smosia)
- SafetyNet passes BasicIntegry
------------------
22012019
(GhostKernel0.12)
- Added new ioscheds (credits: @andrea2107)
- Made some cherry-picks for selinux improvement
- fixed annoying /proc/self/fd/* bug found in logcat
- kernel source now is more hybris friendly
(GhostKernel0.13)
- added some cherry-pick for wifi from launchpad/ubports (with the hope to fix WiFi reconnections)
- disabled dt2w by default (you can enable it using Kernel adiutor)
(GhostKernel0.14)
- fixed kernel version not updating (probably broke the script accidentally, now it applies to system, so now updates the kernel version)
- made "bfq" io-scheduler as default (I learned that it performs much better than "cfq")
- added local version to the kernel
------------------
25012019 (LOS, RR, DOTOS, VOS, CR)
- Added new governors (Credit: @andrea2107)
- added enabled dt2w function on the kernel for focaltech (on atmel doesn't work), disabled by default, use Kernel Adiutor to enable it
- Merged New fixes and features of Ghost kernel0.14(as I use the source for compile the Rom's kernel too)
- fixed stk3x1x alsps bug
------------------
14022019
- Tried to fix Video Recording (on instagram at least it works as I saw, on camera apps still not)
- Ported codec configs to fix flac audio
- Moved modem path from /etc/firmware to /system/etc/firmware on the kernel
------------------

Well, congrats to us - Redmi Note 2 owners -.
Thanks to all contributors and developers.

Is this new version already fixed GPS and intergrated V1.P2 modem ?

LineageOS 14.1 can not read the SIM Contacts book

sanbox said:
LineageOS 14.1 can not read the SIM Contacts book
Click to expand...
Click to collapse
Yeah, but I don't know how to fix it, it looks mostly like a OS Bug

Thanks

How to save a file to external sdcard

Hi @Azizb750
First I read your post here: https://forum.xda-developers.com/showpost.php?p=77463249&postcount=1312
Coming from current RR Nougat ROM for hermes by Dinolek year ago, then I downloaded and clean installed RR-20180829 build and ended with bootloop
After you updated OP, I installed RR-20180828 build > opengapps (armv7, 7.1, pico) > reboot and system booted as it should be! :good:
So far so good, better than older ROM and it satisfied my requirement for daily driver.
Many thanks bro for keeping old Redmi Note 2 alive, even with Nougat. You;re the man. It will be perfect if Security Patch upgraded at least August 5, 2018.
Current security patch December 5, 2017 is too old!
Again, many thanks Azizb750.
Have a great day!
God bless you!
/***********
Now, current ROM is RR-5.8.5 20180828 build.
Launcher: Microsoft, Poco
Google Assistant, Google Photos, works just fine!
Rooted by Magisk 16.7 (1671). SafetyNet: invalid response.
Theme: Substratum, DNA Dark Project.
SOT: 2h 6m

xu3sno said:
Hi @Azizb750
First I read your post here: https://forum.xda-developers.com/showpost.php?p=77463249&postcount=1312
Coming from current RR Nougat ROM for hermes by Dinolek year ago, then I downloaded and clean installed RR-20180829 build and ended with bootloop
After you updated OP, I installed RR-20180828 build > opengapps (armv7, 7.1, pico) > reboot and system booted as it should be! :good:
So far so good, better than older ROM and it satisfied my requirement for daily driver.
Many thanks bro for keeping old Redmi Note 2 alive, even with Nougat. You;re the man. It will be perfect if Security Patch upgraded at least August 5, 2018.
Current security patch December 5, 2017 is too old!
Again, many thanks Azizb750.
Have a great day!
God bless you!
/***********
Now, current ROM is RR-5.8.5 20180828 build.
Launcher: Microsoft, Poco
Google Assistant, Google Photos, works just fine!
Rooted by Magisk 16.7 (1671). SafetyNet: invalid response.
Theme: Substratum, DNA Dark Project.
SOT: 2h 6m
Click to expand...
Click to collapse
Thanks a lot, BTW, about patches is something that came from the Custom ROM and I can't anything for it

DotOs installed, works perfectly thank you very much! An Oreo version soon? Otherwise it's already exellent to have gone from Lolipop to Nougat ?

VoxiBe said:
DotOs installed, works perfectly thank you very much! An Oreo version soon? Otherwise it's already exellent to have gone from Lolipop to Nougat ?
Click to expand...
Click to collapse
+1
Security patch level February 5, 2018! Newer than RR! :good:
However, I preferred RR 5.8.5 good: D
Thanks Azizb750! Thanks devs!
Have a great day!

Just tried crDroid 20180825 build. I like it so much as it's highly customizable as RR. Apart from that, it applied Security patch level July 5, 2018. :good:
It's most likely I prefer to use it as my daily driver.
However, wait until I give a try the other two hermes ROMs, LineageOS and Viper.
Again, thanks a lot Azizb750 for providing N ROMs for our obsolete device!
Have a great day!

Gave a try LineageOS 14.1 for hermes 20180828 build. Everything works just fine, according to my requirements. Sure, you may vary.
Feeling secured as Security patch from August 5, 2018! :good:
Many thanks to @Azizb750 and other devs! ?
Hope, you keep the security patch updated!
Have a great day!

I did try to install ViperOS 20180825, everything works just fine as described on OP.
Security patch of July 5, 2018.
After tried all available N ROMs as provided by OP, I decided to choose crDroid as my daily driver, based on:
1.Highly and easily customizable
2. Not so old security patch (July 5, 2018). Hopefully, Azizb750 will keep updated!
Have a great day!

xu3sno said:
I did try to install ViperOS 20180825, everything works just fine as described on OP.
Security patch of July 5, 2018.
After tried all available N ROMs as provided by OP, I decided to choose crDroid as my daily driver, based on:
1.Highly and easily customizable
2. Not so old security patch (July 5, 2018). Hopefully, Azizb750 will keep updated!
Have a great day!
Click to expand...
Click to collapse
Thanks a lot
But I will not keep them always updated as I would like to stop compiling for a while due of studies after october
But I would like to work on other roms too

viper OS
i tested viper OS, a better rom, smoothly, IR blaster also work well, but fm radio do not work and i cannot make "adb over wifi" work, i hope that can be fixed,thank u

obama88 said:
i tested viper OS, a better rom, smoothly, IR blaster also work well, but fm radio do not work and i cannot make "adb over wifi" work, i hope that can be fixed,thank u
Click to expand...
Click to collapse
adb over wifi doesnot work in Developer options, but third party app as "wifi adb" works after root

Tried latest updated LineageOS 14.1 20180901 and RR 5.8.5 20180901 build.
Security patch August 5, 2018 and December 5, 2017, respectively.
Workings and bugs as described on OP. However, Contacts can't sync, using both methods.
Reverted to crDroid
Anyway, thanks Azizb750 for keeping ROMs for hermes updated!
Have a great day!

Changelog:
-----------------
01092018 (LOS, DotOS and RR)
- Added some lines in ramdisk (for video recording)
- updated BoardConfig.mk
- added new keylayout (Thanks ARTEM)
- added new tweaks in build.prop for [email protected] (thanks @ibilux for help) and removed init.d script
-----------------
03092018 (ViperOS)
- Added some lines in ramdisk (for video recording)
- updated BoardConfig.mk
- added new keylayout (Thanks ARTEM)
- added new tweaks in build.prop for [email protected] (thanks @ibilux for help) and removed init.d script
- edited build.prop to make it debuggable
Click to expand...
Click to collapse
Feel crDroid left behind bro Azizb750!
Have a great day!

i clear all data and flash 03092018(ViperOS) rom, it's bootloop ,but 25082018(ViperOS) rom work,
flash 25082018(ViperOS) firstly, then donot clear data and flash 03092018(ViperOS) rom ,boot into system, but camera crash and adb over wifi still not work ,so 25082018(ViperOS) rom should be keep,until new rom stable

[ROM][STABLE][Signature Spoofing/MicroG support][OTA updates] LineageOS 18.1 for S7 Edge Exynos

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS 18.1 for hero2lte
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Working:
- Wifi
- Sound
- mali drivers
- USB tethering
- HW Backed video Playback
- Ril (Mobile data,calls, sms and stuff)
- Sensors
- Buttons and their backlight
- Bluetooth
- Wifi HotSpot
- MTP
- 2D and 3D gpu acceleration
- HWcomposer (HWC)
- HW encoding/decoding
- Charging with device powered off
- Stuff I didn't test yet
- Camera
- GPS
- Fingerprint Sensor
- Mobicore
- SW codecs
Not Working
-
Take a note that a lot of LineageOS features have not been completed yet this is not a device bug and please do not report those
in this rom thread as you will be reported to moderator also do not post bug reports for known issues or bug reports without proper
a) Logcat
b) proc/last_kmsg (or proc/kmsg)
c) data/tombstones
d) dmesg
Also do not under any circumstances post bug reports if you are using substratum themes or unsupported magisk modules or you have performed any system modifications
Install gapps right after installing the rom itself dont try to boot to system before that if you want to use gapps
NikGapps and BiTgapps were both tested and working
Downloads:
Google Drive
Mega.nz
GitHub releases
MD5: bc0fe8d92234d33414183adac895d773
if you want to support the project feel free to buy me some coffee paypal.me/ivanmeler
BTC: 1Q823BsSbEKP62JFM7BjXiRCgF84qgcFST
ETH(erc20): 0x979a8e42551e62e6994d3762c9d9f0e76b5d87f9
Donations help cover the build server cost and since I do this in my free time, and also cover the coffee for time spent debugging stuff
Feel free to join telegram group with early builds progress updates and some off topic stuff Join
Due to requests from some users I added signature spoofing support to the rom which allows usage of MicroG
you can simply install MinMicroG and grant it needed permissions for signature spoofing to make it work as intended
Based On Android 11/R
Changelog
08.05.2023.
- Merged June 2023. Security update
- Synced with LineageOS source
07.05.2023.
- Merged May 2023. Security update
- Switched to more source built components from new Exynos 850/Linaro BSP
hwcomposer
memtrack
libion_exynos
libGrallocWrapper
gralloc
libcsc
libexynosscaler
libexynosgscaler
libhwjpeg
Whole OMX stack (libOMX.Exynos.*) and stagefrighthw
- Performance, stability and battery life improvements
- Synced with LineageOS source
15.04.2023.
- Merged April 2023. Security update
- Synced with LOS source
21.03.2023.
- Merged March 2023. Security update
- Synced with LOS source
12.02.2023.
- Merged February 2023. Security update
- Synced with LOS source
05.01.2023.
- Merged January 2023. Security update
- Synced with LOS source
08.12.2022.
- Merged December 2022. Security update
- Switched to a new power hal (same one as in 19.1 and 20.0)
- Improved battery life and performance
- Rebased kernel to fix some issues with ipv4 stack
- Synced with LOS source
09.11.2022.
- Merged November 2022. Security update
- Synced with LOS source
06.10.2022.
- Merged October 2022. Security update
- Fixed samsungs bug with gps where it would start acting up over time due to time rollover bug
- Synced with LOS source
08.09.2022.
- Merged September 2022. Security update
- Synced with LOS source
06.08.2022.
- Merged August 2022. Security update
- Synced with LOS source
08.07.2022.
- Merged July 2022. Security update
- Synced with LOS source
09.05.2022.
- Merged June 2022. Security update
- Synced with LOS source
07.05.2022.
- Merged May 2022. Security update
- Synced with LOS source
07.04.2022.
- Drastically speed up app launch time (more info about that here)
- Merged April 2022. Security update
- Imrpoved performance and battery life by disabling some unnecessary logging
- Removed AudioFX which was causing audio issues
- Synced with LOS source
12.03.2022.
- Merged March 2022. Security update
- Implemented OTA updates
- Synced with LOS source
11.02.2022.
- Merged February 2022. security update
- Fixed issue where camera would stop working after prolonged use
- Removed unused custom ld.config.txt that was overriding main one
- Switched to few source built ril related libs
- Added support for changing wireless charging sound
- Misc performance and stability improvements
- Synced with LOS source
09.01.2022.
- Merged January 2022. Security update
- Synced with LOS source
15.12.2021.
- Merged December 2021. Security update
- Removed liboemcrypto which was breaking playback in some apps that use drm
- Synced with LOS source
05.11.2021.
- Merged upstream wireguard kernel changes
- Merged November 2021. Security update
- Synced with LOS source
05.10.2021.
- Merged October security update
- Merged October Kernel upodates to 3.18.x
- Added more advanced burn in protection
- Misc performance and stability updates
- Synced with LOS source
09.09.2021.
- Merged September 2021. Security Update
- Merged September 2021. Security update to kernel
- Fixed WiFi Display (Screen mirroring)
- Resolved few sepolicy issues
- Synced with LOS source
04.08.2021.
- Added battery saver options (settings -> battery)
This allows you to limit phone charging to given percentage
(By default it stops on 75% and starts charging at 25%)
this can be controled by sysfs paths
module/sec_battery/parameters/store_mode_min
and
module/sec_battery/parameters/store_mode_max
In future release there will be a slider for this
- Merged August 2021. Security update
- Merged August 2021. Security update to kernel
- Misc performance and stability improvements
- Synced with LOS source
08.07.2021.
- Merged latest kernel patches from kernel/common android-3.18 branch
- Merged July 2021. security update
- Synced with LOS source
- misc performance and stability improvements
05.07.2021.
- Kernel: Fixed issue where using external sdcard as combined internal storage caused high cpu usage
- Removed leftover aosp charging animations
- mounted cpefs folder on boot
- Added NFC Extended Lenght support
- Fixed power profile swtiching (Better performance/battery life)
- Synced with LOS source
21.06.2021.
- Audio: resewt mixer gains to default values since we have lifevibes working now and handling it
- Audio: Reworked incall audio handling in mixer paths to disable 2nd mic that was picking up noise
- Audio: Reworked voice commands input mixer paths
- Audio: Fixed voip calls not picking up microphone due to wrong paths (e.g. apps telegram, whatsapp)
- Replaced vulkan lib with symlink to mali lib (Like on stock) (This saved some space too)
- Kernel: Merged upstream aosp 3.18 kernel
- Kernel: Merged latest upstream cpufreq (DVFS) patches for dynamic voltage and frequency handling
- Kernel: Enabled CONFIG_HZ_300 for faster interaction handling
- Cleaned up public.libraries.txt
- Resolved few more sepolicy issues
- A lot of perforamnce and stability improvements
- Synced with LOS source
10.06.2021.
- Removed deprecated custom bt hal as AOSP one works too with extra config flag
- removed audio effects from voice_recognition as it caused audio hal to crash/restart
- Merged June 2021. Security update
- Synced with LOS source
06.06.2021.
- kernel: reverted "net: disable netpoll on fresh napis" which caused cpu to lock up at higher frequencies
- removed unsupported audio devices from audio policy config
- Synced with LOS source
03.06.2021.
- sepolicy: Resolved audioserver denial
- sepolicy: Allowed mediaserver to read exported_camera_prop
- Moved volume panel to left side
- Removed invalid media codec config for vc1 decoder
- Removed prop that would try to load non existing vulkan lib
- Updated media profiles to new schema
- kernel: Upstreamed and updated to 3.18.140 with all of the latyest security patches and updates to date
- kernel: enabled vdso32 (https://source.android.com/devices/architecture/kernel/config#vdso32-on-arm64) perf. and battery life improvements
- kernel: fixed issues with obb folder present in rare cases
- kernel: merged latest android kernel/common 3.18 branch
- kernel: updated wireguard
- kernel: merged N935FXXS8CUD1 source drop
- Synced with latest los source
05.05.2021.
- sepolicy: Allowed cbd (Modem daemon) service to read proc_net sysfs
- sepolicy: Allowed gpuservice acces to graphics_config_prop
- sepolicy: improved debugfs handling for mali and ion
- Fixed video recording in a lot of apps (Might require clean flash for some users)
- Updated blobs to N935FXXS8CUD1 (April 2021 security update)
- Fixed edge case where fast charging switch would be ignored because its chwoned too late
- Compiled NFC hal from source (Google released samsung nfc source
(https://android.googlesource.com/platform/hardware/samsung/nfc/), (Should improve stability)
- Upreved livedisplay implementation (to 2.1) with native flicker free support
- Added lifevibes blobs for audio effects and enhancements
- Merged May 2021 security update
- Synced with LOS source
07.04.2021.
- Fixed Vulkan
- Disabled WPA2 to WPA3 auto-upgrade (This caused issues on some wifi networks)
- Rebased AntiFlicker and livedisplay support
- Performance and stability improvements
- Synced April 2021 Security Update
- Synced with LOS source
22.03.2021.
- Added signature spoofing support for MicroG
- Cleaned up codebase
- Misc performance and satbility improvements
- Synced with LOSsource
04.03.2021.
- Fixed Mouse pointer icon when using an external mouse
- Improved swcodec handling
- Performance and stability improvements
- Merged March 2021. security update
- Synced with LOS source
18.02.2021.
- Fixed cover case display states being flipped
- Improved renderscript handling
- Further imrpoved selinux policies and fixed denials
- Fixed binder related vurnability in kernel
- disabled zcache compression which could caue kernel panics
- Misc performance and stability improvements
- Synced with LOS source
05.02.2021.
- Improved HWC handling
- Added always on display
- Fixed issue where some games would show swapped colors
- Rebased sepolicy
- Fixed hwc selinux denials that slowed down UI
- Added support for smart cover cases
- Imrpoved renderscript performance
- Imrpoved offline charging (New animation and it should recognize wireless charger while phone is off now)
- Misc performance and stability improvements (A lot of them, as always you can check github and lineageos gerrit)
- Merged February 2021. security update
- Synced with LineageOS source
24.01.2021.
- Fixed HWC
- Drastically improved performance and battery life
- Added back flicker free dimming and fast charging switch (Now as hiidl interfaces)
- Switched to samsungs DT2W driver used on AOD on stock (Battery life improvements)
- Added custom LiveDisplay modes
- Disabled some excess logging
- Cleaned up codebase
13.01.2021.
- Merged januart 2021 Security Updat
- Fixed issues with fingerprint in 3rd party secure apps (banking apps paypal password managers)
- Updated prebuilt binaries
- Cleaned up mixer paths
- Added neural network drivers
- Disabled p2p mac randomization
- Fixed wifi direct
- Removed unused 32bit drivers
- Improved performance and stability
- A lot more unmder the hood changes
22.12.2020.
- Merged december 2020 security update
- Fixed volume adjustment with audio
- Drastically improved audio quality
- Merged December pixel feature drop
- Fixed noise cancelling in call
- Misc performance and stability improvements
24.11.2020.
- Fixed in call audio (Volume changing in call is still somewhat broken)
- Merged November 2020 security update
- Imrpoved BT audio handling
- Selinux is back in Enforcing mode
- Fixed signal strenght indicator for all network modes (2g/3g/4g)
- Fixed soft buttons backlight handling
- Fixed fingerprint recognition in some apps (Non secure ones for now)
- Fixed glove mode
- Misc performance and stability improvements
- Synced with LOS source
06.10.2020.
- Improved brightness slider range
- Improved microphone input in some voip apps
- Synced with LOS source
05.10.2020.
- Initial release
XDA:DevDB Information
LineageOS 18.0 for S7 Edge, ROM for the Samsung Galaxy S7 Edge
Contributors
Ivan_Meler
Source Code: https://github.com/8890q/android_kernel_samsung_universal8890/tree/lineage-18.1
ROM OS Version: Android 11
ROM Kernel: Linux 3.18.x
Version Information
Status: Stable

Keep in mind this is early build and many los features are not merged yet do not report those as bugs as they are not device specific and will be resolved
Also here are some screenshots
Also big thanks to everyone who supported this and other projects since lineageos 15.1 since i do this in my free time and donations help offset server cost and get me coffee

reserved

Good work :good:

Thank you

Thanks a ton for your work, and for keeping our beloved phone alive, dev! Much love, hoping all the bugs get ironed out and we get a daily drive-able version soon, thanks again

which gapps should be installed? Thank you.

Well it works pretty good no reboots that I had happen. I was able to root it with magisk v21 manager v8. All the modules I use worked and to my shock edxposed Android R 5.06 Yafha worked perfectly. We have never had xposed work when android updates to the latest that is mind blowing. However you know I got 1 complaint. SDcard would not read I wasnt about to reformat a 400gb sdcard with everything on it for a rom I wasnt going to stay on. All in all excellent I had to flash rom, than flash gapps and reboot than flash maigsk v21 after opening up developer options other wise if you just line 1,2,3 zips up it wont work. I want to say I used niks gapps but I downloaded both bit and niks and cant remember.

Thanks for the ROM so early. I don't know if what I'm about to mention is a bug or just an error for me, but has anyone else had an issue with the brightness slider? That's my only problem so far :c

Are the microphone issues (not working for audio messages, echo when calling) fixed in this one? Any chance they will be?

OMG you're the first one to build Android R... I want to build it too, but stuck at libhidltransport stuff and another changes in android R..
I'll try this rom... Thanks for building...

New build is up here is a brief changelog
- Improved brightness slider range
- Improved microphone input in some voip apps
- Synced with LOS source
Big thanks to evryone who supported this project as their donations go towards build server cost and coffee

KeepassDX biometric issue still exists (issue present in 17.1 as well). In 18, the issue is worse: when I go to enable biometric, a pop-up appears stating "Could not start this feature".
Hoping you can update the security patch and vendor patch to LOS16 version, as that was last version that had no issues

Techguy777 said:
Well it works pretty good no reboots that I had happen. I was able to root it with magisk v21 manager v8. All the modules I use worked and to my shock edxposed Android R 5.06 Yafha worked perfectly. We have never had xposed work when android updates to the latest that is mind blowing. However you know I got 1 complaint. SDcard would not read I wasnt about to reformat a 400gb sdcard with everything on it for a rom I wasnt going to stay on. All in all excellent I had to flash rom, than flash gapps and reboot than flash maigsk v21 after opening up developer options other wise if you just line 1,2,3 zips up it wont work. I want to say I used niks gapps but I downloaded both bit and niks and cant remember.
Click to expand...
Click to collapse
Greetings, I have not been able to root it with magisk 20.4 or magisk 21. Could you help me?

peur said:
Greetings, I have not been able to root it with magisk 20.4 or magisk 21. Could you help me?
Click to expand...
Click to collapse
Just install it after setting up the rom.

peur said:
Greetings, I have not been able to root it with magisk 20.4 or magisk 21. Could you help me?
Click to expand...
Click to collapse
The other guy is right you flash rom, flash gapps , and finally flash v21. I use SHRPS recovery 2.3.2 ltehero 2 and hero 1 actaully I have both phones. Maybe thats different. It wont work if you hit plus zip , plus zip , plus zip. You have to do 1 flash let it finish than flash the other I dont know why. For the first release Its super impressive just the sdcard thing otherwise it would be a daily driver except I didnt check sim card.

ROM wants to format mSD card, even tho the same mSD card works fine in 16 and 17.1
that normal?
edit: even after formatting, 18 won't recognise the mSD card - instead, a notification shows, saying there is a error with mSD card and to fix it, it needs to format... which I did.... and then it showed the error again, saying it needs to format again..... so a useless cycle

thank u for this good rom i don't have any problems .thank u again :good::good::good:

@ivanmeler Simply amazing!!!!!!
Was about to post with problem regarding Googleplay signature verification, just cleared storage and all good :good:
Your work is brilliant and greatly appreciated I've never had one problem with any of your builds
Thank you .
---------- Post added at 04:06 AM ---------- Previous post was at 04:01 AM ----------
Techguy777 said:
The other guy is right you flash rom, flash gapps , and finally flash v21. I use SHRPS recovery 2.3.2 ltehero 2 and hero 1 actaully I have both phones. Maybe thats different. It wont work if you hit plus zip , plus zip , plus zip. You have to do 1 flash let it finish than flash the other I dont know why. For the first release Its super impressive just the sdcard thing otherwise it would be a daily driver except I didnt check sim card.
Click to expand...
Click to collapse
Mines worked plus zip plus zip plus zip
rom, nikgapps, magisk 21.0 all together
All good
Also my sdcard is sweet. No problems at all Samsung 16gb class10
Yeah the dude has a talent, excellent work for a first build on A11

Bertonumber1 said:
@ivanmeler Simply amazing!!!!!!
Was about to post with problem regarding Googleplay signature verification, just cleared storage and all good :good:
Your work is brilliant and greatly appreciated I've never had one problem with any of your builds
Thank you .
---------- Post added at 04:06 AM ---------- Previous post was at 04:01 AM ----------
Mines worked plus zip plus zip plus zip
rom, nikgapps, magisk 21.0 all together
All good
Also my sdcard is sweet. No problems at all Samsung 16gb class10
Yeah the dude has a talent, excellent work for a first build on A11
Click to expand...
Click to collapse
Did you had to format your sd card first?

LineageOS 19.1 (Android 12L) [Signature Spoofing][OTA updates] for S7 Edge Exynos

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS 19.1 for hero2lte
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Working:
- Wifi
- Sound
- mali drivers
- USB tethering
- HW Backed video Playback
- Ril (Mobile data,calls, sms and stuff)
- Sensors
- Buttons
- Bluetooth
- Wifi HotSpot
- MTP
- 2D and 3D gpu acceleration
- HW encoding/decoding
- HWcomposer (HWC)
- Charging with device powered off
- Stuff I didn't test yet
- Camera
- GPS
- Fingerprint Sensor
- Mobicore
- SW codecs
Not Working
-
Keep in mind that some LineageOS features have not been completed yet this is not a device bug and please do not report those
in this rom thread, also do not post bug reports for known issues or bug reports without proper
a) Logcat
b) proc/last_kmsg (or proc/kmsg)
c) data/tombstones
d) dmesg
Install gapps right after installing the rom itself don't try to boot to system before that if you want to use gapps (Or wipe data before installing them)
Make sure gapps you decide to use support android 12L/12.1/Are targetting api level 32
Also make sure you are using latest official TWRP before installing rom older versions do not have proper android 12 support
If you want to use Magisk use latest Magisk Beta (25.0) or Magisk 24.1, there is bug in 24.3 that was fixed after its release that prevents zygisk from working on some devices with 3.18 kernel
Downloads:
Google Drive
Mega.nz
GitHub Releases
MD5: 00080b65246e4581d46832953e077202
if you want to support the project feel free to buy me some coffee paypal.me/ivanmeler
BTC: 1Q823BsSbEKP62JFM7BjXiRCgF84qgcFST
ETH(erc20): 0x979a8e42551e62e6994d3762c9d9f0e76b5d87f9
Donations help cover the build server cost and since I do this in my free time, and also cover the coffee for time spent debugging stuff
Feel free to join telegram group with early builds progress updates and some off topic stuff Join
Based On Android 12L/S
Changelog
06.06.2023.
- Merged June 2023. Security update
- Synced with LineageOS source
05.05.2023.
- Merged May 2023. Security update
- Misc performance and stability improvements
- Synced with LineageOS source
24.04.2023.
- Switched to more source built components from new Exynos 850/Linaro BSP
hwcomposer
memtrack
libion_exynos
libGrallocWrapper
gralloc
libcsc
libexynosscaler
libexynosgscaler
libhwjpeg
Whole OMX stack (libOMX.Exynos.*) and stagefrighthw
- Performance, stability and battery life improvements
- Synced with LineageOS source
12.04.2023.
- Merged April 2023. Security update
- Synced with LineageOS source
17.03.2023.
- Merged March 2023. Security update
- Synced with LineageOS source
11.02.2023.
- Merged February 2023. Security update
- Synced with LineageOS source
05.01.2023.
- Merged January 2023. Security update
- Misc performance and stability improvements
- Synced with LineageOS source
07.12.2022.
- Merged December 2022. Security update
- Synced with LineageOS source
09.11.2022.
- Merged November 2022. Security update
- Cleaned up patches list
- Synced with LineageOS source
05.10.2022.
- Merged october 2022. Security update
- Fixed samsungs bug with gps where it would start acting up over time due to time rollover bug
- Synced with LineageOS source
07.09.2022.
- Merged September 2022. Security update
- Updated chromium webview to 105.0.5195.79
- Synced with LineageOS source
07.08.2022.
- Merged August 2022. Security update
- Synced with LineageOS source
07.07.2022.
- Merged July 2022. Security update
- Fixed more keystore issues
- Synced with LineageOS source
24.06.2022.
- Fixed issues with keystore present in a lot of bank/secure apps like binance
- Fixed issue where setupwizard would crash when adding fingerprint due to bug in keystore
- Cleaned up patches required for build and removed unneeded ones
- Synced with LineageOS source
07.06.2022.
- Merged June 2022. security update
- Merged June 2022. pixel feature drop (SQ3A.220605.009.A1)
- Improved in-call audio quality drastically
- Addressed few more selinux denials
- Improved general stability and performance
- Cleaned up source
- Synced with LineageOS source
26.05.2022.
- Updated libexynosdisplay from BSP to comply with some android 12 changes
- Removed unused build.prop entries
- Fixed few selinux denials related to hwc props
- Improved UI performance and stability
- Cleaned up source
- Removed more unneeded patches for device support
- Synced with LineageOS source
18.05.2022.
- Added QR code reader quick settings toggle
- Improved device performance and stability
- Added Custom low power mode power profile for cpu
- Improved A-GNSS (A-GPS) Lock speed
- Exposed device hw revision to settings
- Improved fast/slow charger detection
- Synced with LineageOS source
10.05.2022.
- Switched to new libperfmgr power hal which can be configured from /system/vendor/etc/powerhints.json
- Adapted DT2W to new power hal
- Muted phone services gps notif (Thanks google really appreciate you breaking random things for everyone)
- Improved battery life and performance
- Cleaned up all of leftover patches that were used by legacy power hal
- Synced with LineageOS source
07.05.2022.
- Improved battery usage logging for display
- Added QR code reader to camera app (Long hold icon and launch it from context menu)
- Misc performance and stability improvements
- Merged May 2022. security update
- Synced with LineageOS source
27.04.2022.
- Removed libbfqio dependency from hwc since it was dropped from lineageos 19.1
- Misc performance and stability improvements
- Synced with LineageOS source (same base as official builds + some extras)
18.04.2022.
- Fixed bug wehre vibrations were too low on some devices due to inintensity being set to 0
- Fixed bug where apps would show square popup "animation" when launching from icon instead of roudned one
- Cleaned up build patches
- Synced with LineageOS source
15.04.2022.
- Updated sepolicy and merged updated common samsung_slsi sepolicy
- Increased microphone gain while recording media (Camcorder, voice recording etc.)
- Added option to disable vibration feedback on fingerprint auth
- Synced with LineageOS source
08.04.2022.
- Fixed extended volume panel
- Updated icons for few more stock apps
- Cleaned up patches further
- Misc peroformance improvements
- Synced with LineageOS source
06.04.2022.
- Merged April 2022. Security update
- Enabled new LineageOS icons (you might have to clear launcher cache for them to show up)
- Fixed issue where galery app would show black text on black background
- Fixed issue where unlock sound would sometimes play twice
- Misc performance and stability improvements
- Synced with LineageOS source
29.03.2022.
- Drastically speed up app launch time (more info about that here)
- Imrpoved performance and battery life by disabling some unnecessary logging
- Switched to source built camera provider and removed samsung proprietary one
- Upreved camera provider to 2.5
- Fixed few selinux denials related to NFC trying to raad debug props
- Removed floating_feature.xml which is unused on aosp
- Disabled livedisplay by default
- Cleaned up extra dependencies used for compiling
- Synced with LOS source
22.03.2022.
- Added back configurable audio volume panel location
- Speed up unlock with fingerprint
- Updated a lot of apps to MaterialYou design language
- Fixed issue where touch screen area bellow home button would act as a gesture area even while gestures are disabled
- Improved stability of ADB connection
- Implemented new LineageOS setupwizard
- Cleaned up device tree and list of required patches
- Stability and performance improvements
- Pointed Changelog url in updater app to new page
- Synced with LineageOS source
14.03.2022.
- Fixed issue with keystore where apps would crash when invoking it (Security related apps mostly like signal and a lot of work apps)
- Officially rebranded as 19.1
- Updated changelog URL in updater app to point to a valid changelog
- Fixed battery icon styles (Again..)
- Removed invalid zram config.
- Cleaned up source
- Performance and stability improvements
- Updated some stock apps to math with new design
- Synced with LineageOS source
10.03.2022.
- Merged March 2022. security and feature updates (Android 12L)
- Fixed status bar network trafic monitor
- Improved zram performance and enabled zram writeback
- Cleaned up patches needed for build
- Fixed network usage monitoring
- Fixed per app network restrictions
- Removed AudioFX which was causing issues
- Decreased microphone and earpiece gain a bit to mitigate in-call issues
- Updated some device control apps like advanced display settings
- Improved vibrator intensity in new hal
- Imrpoved fp sensor response time
- A lot of 'under the hood' changes
- Performance improvements
- Merged more previously missing los features
- Implemented OTA updates
10.02.2022.
- Merged February 2022. security update
- Removed broken volume button location toggle
- Synced with LOS source
09.02.2022.
- Fixed issue where camera would stop working after prolonged use
- Misc performance and stability improvements
- Merged some more lineageos features that have been posted to gerrit
- Synced with LOS source
28.01.2022.
- Fixed developer options crashing on launch
- Added Bluetooth SBC Dual Channel HD audio mode
- Synced with LOS source
27.01.2022.
- Added back lineageos setup wizard present on clean installs
- Merged some of previously missing features that have been ported over to LineageOS 19
- Performance and stability improvements
- Synced with LOS source
18.01.2022.
- Enabled selinux (Its enforcing now)
- Moved audio hal to vendor
- Fixed confirmation dialog box for button backlight
- Fixed ok button which would go missing for button backlight
- Switched to source built secril_config_svc (used for ds detection)
- Removed obsolete debug.sf.disable_backpressure prop
- Merged latest security updates to kernel from aosp kernel/common
- Cleaned up source
- Cleaned up unused props
- Removed unused custom ld.config.txt that was overriding main one
- Misc performance and stability improvements
- Synced with LOS source
06.01.2022.
- Removed duplicate props in vendor and system
- Cleaned up device tree code
- Switched to source built camera provider lib
- Switched to few source built ril related libs
- Addressed more selinux denials
- Fixed volume panel location settings
- Added button backlight
- Added Advanced Reboot
- Added LiveDisplay entry into settings
- Added system side toggle for navigation bar
- Merged January 2022 Security Update
- Merged most of previously missing LineageOS features
- Misc performance and stability improvements
- Synced with LOS source
20.12.2021.
- Fixed wireless display
- Reduced logspam which should imrpove performance a bit
- Misc performance and stability improvements
- Synced with LOS source
16.12.2021.
- Merged r18 tag of Android 12 (SQ1D.211205.016.A1)
- Removed liboemcrypto which was preventing drm playback in some apps
- Synced with LOS source
13.12.2021.
- Updated Clearkey to 1.4
- Addressed most of selinux denials
- Switched to new AIDL Lights hal
- Upreved audio hal to 7.0
- Switched to new AIDL Vibrator hal
- Disabled configstore which got replaced with props
- Upreved fingerprint hal/service to 1.3
- Removed unused kernel defconfig flag
- Synced with LOS source
09.12.2021.
- Merged December 2021. Security update
- Merged December 2021 pixel feature drop
- Added signature spoofing support which can be used to add microg instead of gapps
- Merged a lot of lineageos features that have been implemented
- Fixed bluetooth sample rate while in call
- Moved device specific ueventd rules to /system/vendor/etc
- Freed up some ram
- performance and stability improvements
30.11.2021.
- Initial release
XDA:DevDB Information
LineageOS 19.0 for S7, ROM for the Samsung Galaxy S7
Contributors
Ivan_Meler
Source Code: https://github.com/8890q/android_kernel_samsung_universal8890/tree/lineage-19.0
ROM OS Version: Android 12L
ROM Kernel: Linux 3.18.x
Version Information
Status: Stable

After a long wait, here it is, Surprisingly smooth android 12 on s7
check out screenshots here
https://imgur.com/a/A6aTCrv
Big thanks to everyone who supported this project so far as they helped cover the build server cost and got me coffee for hours spent debbuging weird issues
enjoy android 12 and stay safe

Very good thanks

Thanks ivan....You are always number one....

Where to get BiTgapps?

Vikturist said:
Where to get BiTgapps?
Click to expand...
Click to collapse
BiTGApps Official - ARM64
Custom GApps Package For Android Platform ARM64.
www.pling.com
Click on Files and Download Android 12 Package

Thank you so much. Just installed your Los 18.1 and works perfect. Gonna flash today

AWESOMENESS!!! THANK YOU SO MUCH!

Sweet, will try it later

Awesome busy downloading. Thanks very much Ivan. will install in the next hour.

Hello.
The build is quite stable with few bugs here and there. However I'm unable to get to twrp and now stuck at ywrp startup screen. Now do I need to reflash twrp or whole stock rom ? Plz help thanks. My device is s7 edge duos.

shakeelbirmani said:
Hello.
The build is quite stable with few bugs here and there. However I'm unable to get to twrp and now stuck at ywrp startup screen. Now do I need to reflash twrp or whole stock rom ? Plz help thanks. My device is s7 edge duos.
Click to expand...
Click to collapse
I confirm, I also have the same

shakeelbirmani said:
Hello.
The build is quite stable with few bugs here and there. However I'm unable to get to twrp and now stuck at ywrp startup screen. Now do I need to reflash twrp or whole stock rom ? Plz help thanks. My device is s7 edge duos.
Click to expand...
Click to collapse
Solved.
Just flashed latest twrp through odin and now booted fine.

Build is surprisingly stable. However I have noticed a few things.
Pure black dark mode doesn't work.
Mobile network speed is showing 0.00.
Wireless screen sharing causes reboot.
Mobile feels warm to touch.
I know those aren't huge bugs but just to point out. These are the ones I have found so far.
Great work developer thanks Keep it up.

shakeelbirmani said:
Build is surprisingly stable. However I have goint few things.
Pure black dark mode doesn't work.
Mobile network speed is showing 0.00.
Wireless screen sharing causes reboot.
Mobile feels warm to touch.
I know those aren't huge bugs but just to point out. These are the ones I have found so far.
Great work developer thanks Keep it up.
Click to expand...
Click to collapse
And gesture navigation also don't seem to work properly

shakeelbirmani said:
Solved.
Just flashed latest twrp through odin and now booted fine.
Click to expand...
Click to collapse
link can be requested

Back and multiwindow buttons do not illuminate, show volume on the left is toggled on but only displays on the right.
24hr time style is greyed out, to get it to work you have to disable locale default, then 24hr format becomes active on toggle.
That is all the bugs I have found so far.
Very impressive for a first build, smooth as silk, got to say, hats off to you Ivan

ewabem5 said:
link can be requested
Click to expand...
Click to collapse
Download twrp-3.6.0_9-0-hero2lte.img.tar
Download page for twrp-3.6.0_9-0-hero2lte.img.tar
dl.twrp.me

shakeelbirmani said:
Download twrp-3.6.0_9-0-hero2lte.img.tar
Download page for twrp-3.6.0_9-0-hero2lte.img.tar
dl.twrp.me
Click to expand...
Click to collapse
Thank you

Database Develop

welcome