Related
Hi!
I got my kindle fire hd today (german edition) and tried to root my device. So i watched the guide on *** and read several articles and forum threads to be prepared rooting the kindle fire. Ok first of all: i might have damaged the screen, although i have no clue how this happened. One of the corner led doesn't work properly anymore. The effect is like heavy clouding on led tvs.
I followed exactly the tutorial on ****. After the first step, the processor starts to heat up and the tablet slows a bit down. After the second reboot the tablet gets really hot and significantly slows down. The screen starts to flicker and the tablet needs about 10 seconds to execute a command. After a reset to factory defaults everything works like charm except the clouding. I changed the usb port, reinstalled the android sdk and even used qemuroot. Nothing works. I am going to send my kindle back and buy another one, but i wont try to root it without solving this problem. Does anyone have an idea??
/edit as a new member i can't post any urls. The first *** is reverendkyle.c*m and the second is an article on redmondpie
Sounds like you received a defective device. Send it back.
Maybe the "German Edition" versions were those that didn't make the first round of quality control checks.
soupmagnet said:
Sounds like you received a defective device. Send it back.
Maybe the "German Edition" versions were those that didn't make the first round of quality control checks.
Click to expand...
Click to collapse
I only mentioned it because my firmware version isn't 7.21 (sorry my fault) but 7.20. Never heard of it, maybe the eu version somehow differs from the us version.
noskill123 said:
I only mentioned it because my firmware version isn't 7.21 (sorry my fault) but 7.20. Never heard of it, maybe the eu version somehow differs from the us version.
Click to expand...
Click to collapse
7.20 is on the 32GB that I just received today.
soupmagnet said:
Sounds like you received a defective device. Send it back..
Click to expand...
Click to collapse
yup, it's the right advice. don't try to force any root, send the device back instead and have a new try with the next one.
The root will work for both 7.2.0 and 7.2.1, barring any anomalies with your specific device. I would use the automated root found on this forum when you try rooting next time, since it'll eliminate any possible mistakes (not saying you made any). Either way, everyone else is definitely right in saying you got a defective device. Luckily, Amazon's pretty good about replacements when you're under warranty. My own device's CPU was running so hot, it smelled like things were melting. Got it replaced with no fuss, and no extra charges.
noskill123 said:
Hi!
I got my kindle fire hd today (german edition) and tried to root my device. So i watched the guide on *** and read several articles and forum threads to be prepared rooting the kindle fire. Ok first of all: i might have damaged the screen, although i have no clue how this happened. One of the corner led doesn't work properly anymore. The effect is like heavy clouding on led tvs.
I followed exactly the tutorial on ****. After the first step, the processor starts to heat up and the tablet slows a bit down. After the second reboot the tablet gets really hot and significantly slows down. The screen starts to flicker and the tablet needs about 10 seconds to execute a command. After a reset to factory defaults everything works like charm except the clouding. I changed the usb port, reinstalled the android sdk and even used qemuroot. Nothing works. I am going to send my kindle back and buy another one, but i wont try to root it without solving this problem. Does anyone have an idea??
/edit as a new member i can't post any urls. The first *** is reverendkyle.c*m and the second is an article on redmondpie
Click to expand...
Click to collapse
That’s exactly what happen to me about 10 days ago my KFHD
Get hot and speed is unbelievable slow down but I do manage to reset to factory setting
http://forum.xda-developers.com/showthread.php?p=32866304#post32866304
But finally I manage to root my KFHD and switch off upgrade option because I don’t want
The same problem occurs to me again.
My mistake at the first time is I mix up the method using manually method by reverendkjr
And on half way using script giving by sparkym3, so on the second attempt I only use
manually method by reverendkjr doing exactly what he is done and I get my KFHD rooted
I hope this will help you
NB
Even I uncheck automatic update they still updated my KFHD now I am with 7.21
and became unroot yes will start allover again.:fingers-crossed:
Hi guys, i am kinda new here, hope i am on the right spot.
I recently bought a HTC One in the Netherlands. Its a beautiful phone! Already like it more then my rooted Xperia Z.
Today (The first day) i started installing my phone. Setted up some random things, untill i came at the Google account set-up. I already had one, so i chose that option. Then the first crash occured. The phone sent me to the screen i started 1 minute ago, the "Select language" screen.
I ignored that, and choose to set that up on an other moment.
When I tried to open Facebook, it showed me the logo, the logo moved up, but then it crashed and closed the application.
1 minute later, i tried to pull down the notification bar, but then my whole phone crashed! It rebooted.
I tried to update the phone software, didnt work. I also tried to do a hard reset, didnt work either.
The summary:
I cant set up an existing Google account, it crashes.
I cant open facebook, it crashed.
Sometimes, when i pull down the notification bar, it crashes.
Can someone help me out?
Excuse me for my grammer/typo's.
Lots of love.
Richard.
Richurdt said:
Hi guys, i am kinda new here, hope i am on the right spot.
I recently bought a HTC One in the Netherlands. Its a beautiful phone! Already like it more then my rooted Xperia Z.
Today (The first day) i started installing my phone. Setted up some random things, untill i came at the Google account set-up. I already had one, so i chose that option. Then the first crash occured. The phone sent me to the screen i started 1 minute ago, the "Select language" screen.
I ignored that, and choose to set that up on an other moment.
When I tried to open Facebook, it showed me the logo, the logo moved up, but then it crashed and closed the application.
1 minute later, i tried to pull down the notification bar, but then my whole phone crashed! It rebooted.
I tried to update the phone software, didnt work. I also tried to do a hard reset, didnt work either.
The summary:
I cant set up an existing Google account, it crashes.
I cant open facebook, it crashed.
Sometimes, when i pull down the notification bar, it crashes.
Can someone help me out?
Excuse me for my grammer/typo's.
Lots of love.
Richard.
Click to expand...
Click to collapse
If you can get past the setup screens, do a full reset of the phone. But it sounds to me like the phone may have a manufacturing problem and needs to be returned for an exchange.
stevedebi said:
If you can get past the setup screens, do a full reset of the phone. But it sounds to me like the phone may have a manufacturing problem and needs to be returned for an exchange.
Click to expand...
Click to collapse
i can pass the setup screens. The reset didnt work.
I think returning it to the shop will be the only option i have left. Dont wanna lose my phone for 4 more weeks! haha.
Thanks for trying.
curious....
Richurdt said:
i can pass the setup screens. The reset didnt work.
I think returning it to the shop will be the only option i have left. Dont wanna lose my phone for 4 more weeks! haha.
Thanks for trying.
Click to expand...
Click to collapse
Hey Richurdt.
I know you're HTC One's issue was long resolved already. I wanna know how you fixed your issue. Because I have a very similar issue to yours before. I'm afraid that mine might be a hardware problem. I used my HTC One for almost 4mos then I had the same issues as yours came up.
I hope mine doesn't need to be returned to the store.
Hey all, I recently got my nexus 6, and out of the box it worked fine. I started trying it out, and realized things were crashing quite often, like google play, and gmail. Then it prompted me to install the Android 5.1 update, which is when all this started.
Upon finishing the upgrade my nexus 6 cannot get past the Optimizing Apps screen, as soon as it gets onto the "Starting Apps" state, it will simply crash, and start over, booting again. This has been very frustrating since I just got this device and want to enjoy it. I have not rooted it, I have not tampered with it and the bootloader is locked. I tried cleaning the cache partition but that didn't help. So is anyone else experiencing this with their nexus 6? I really need a way to fix this, and if I have to flash the stock image onto it, then I will. But since the bootloader is locked is that even possible?
Please help me, I don't want to send it back in and wait another eternity.
Yes it's possible. However. Try a factory reset from recovery first.
graydiggy said:
Yes it's possible. However. Try a factory reset from recovery first.
Click to expand...
Click to collapse
I've done that a zillion times. It's not working, my phone refuses to get past the "Android starting..." screen. So if you could walk me through how to flash, since I couldn't find a guide online.
I called google support, and they want to replace it. So I'm gonna do exactly that.
I'm now on my third phone from google and they all do this. easily the worst customer service experience I've ever had in my entire life.
[email protected] said:
I'm now on my third phone from google and they all do this. easily the worst customer service experience I've ever had in my entire life.
Click to expand...
Click to collapse
third? that makes it seem as you are the one thats not doing something right. just saying. one, ok, it happens. two, chances are very slim, but it can happen, mist likely wont. three, you are doung something wrong. if you factory reset, then it boots without android is upgrading. when you add apps, change apps, or change things in your system, or wipe dalvik, then android is upgrading happens.
[email protected] said:
I'm now on my third phone from google and they all do this. easily the worst customer service experience I've ever had in my entire life.
Click to expand...
Click to collapse
DEFINATELY operator error...
they don't "all do this", otherwise the THOUSANDS of us here on XDA who flash things constantly without issue every day would be experiencing the same thing..
I purchased my first Samsung tablet today after a long, loving relationship with Asus Transformers (wanting something smaller). To my surprise OEM Unlocking was not available in Dev Mode. Having not owned a Samsung device since my S5 I searched high and low on Google and nothing worked. Tons of suggestions for S8's/9's but nothing for my new little SM-T380. I tried variations of everything I found and when none of them worked, started back at the top of the list. I FINALLY GOT LUCKY.
TL;DR - Today's date is 12/1/2018, time was 9:32pm (central).
I toggled my date/time to manual.
I manually set my date to 11/1/17. (YES, ONE YEAR AND ONE MONTH EARLIER)
Before wifi had time to reconnect after the date change I manually checked for updates and it errored out.
Without pressing anything else, I held the power button and restarted.
After restart I checked to see if OEM Unlocking was there and it wasn't.
I then adjusted the date back farther to a random interval. (Ended up being 03/1/17)
Manually check for updates again.
Selected dev options on the left again and OEM Unlocking finally appeared!!!!!1
Notes:
SM-T380
7.1.1
ARB3 build
B1G7r33! said:
I purchased my first Samsung tablet today after a long, loving relationship with Asus Transformers (wanting something smaller). To my surprise OEM Unlocking was not available in Dev Mode. Having not owned a Samsung device since my S5 I searched high and low on Google and nothing worked. Tons of suggestions for S8's/9's but nothing for my new little SM-T380. I tried variations of everything I found and when none of them worked, started back at the top of the list. I FINALLY GOT LUCKY.
TL;DR - Today's date is 12/1/2018, time was 9:32pm (central).
I toggled my date/time to manual.
I manually set my date to 11/1/17. (YES, ONE YEAR AND ONE MONTH EARLIER)
Before wifi had time to reconnect after the date change I manually checked for updates and it errored out.
Without pressing anything else, I held the power button and restarted.
After restart I checked to see if OEM Unlocking was there and it wasn't.
I then adjusted the date back farther to a random interval. (Ended up being 03/1/17)
Manually check for updates again.
Selected dev options on the left again and OEM Unlocking finally appeared!!!!!1
Notes:
SM-T380
7.1.1
ARB3 build
Click to expand...
Click to collapse
What's the REAL difference between what you did today and what we did days ago.? Is the same thing we came up with 3 days ago.. Just your version of the same thing..
Three days ago?
This didn't work for me. Neither have any of the other similar date-spoofing methods people have suggested or linked to on this forum. I'd be happy to be wrong, but there doesn't seem to be a legitimate way to trick this tablet into letting you bypass the 7 day wait for OEM Unlock to appear.
@B1G7r33!, if your method actually works, can you replicate the process and prove it? Can you wipe your data, flash back to stock firmware, go to Settings>About tablet>Status, and take a screenshot that shows the "Up time" of the tablet, go through your suggested date-spoofing method, then if OEM Unlock appears, take another screenshot of your tablet's up time, and one screenshot of your developer options menu.
I'm not calling you a liar, it's just that this and similar methods haven't worked for me and haven't been confirmed as working by anyone else yet. If it actually works, then great, but it's not working for me, so I'd like to pinpoint the problem and solve it.
B1G7r33! said:
Three days ago?
Click to expand...
Click to collapse
actually starting on 14th November 2018, 07:17 PM and ending about 4 days ago.. with ptballers solution.
post 118 was the beginnings of it on the thread: https://forum.xda-developers.com/ga...10-02-2018-t3747564/post78159074#post78159074
but even THAT came from earlier works that weren't detailed enough and reconstructed.
the builds seem to be way different here in the solution, i had luck with what we came up with but have only done that once so far.
I am using build NMF26X.T380DXU1ARB3 myself, what about you?
we need to figure out what ptballer is using and everyone else too as we confirm stuff so we know what to do with tablets based upon builds.
seems there is no single solution yet, and that's what we really need too keep confusion cut down to a minimum.
---------- Post added at 06:16 PM ---------- Previous post was at 06:12 PM ----------
Evul1 said:
This didn't work for me. Neither have any of the other similar date-spoofing methods people have suggested or linked to on this forum. I'd be happy to be wrong, but there doesn't seem to be a legitimate way to trick this tablet into letting you bypass the 7 day wait for OEM Unlock to appear.
@B1G7r33!, if your method actually works, can you replicate the process and prove it? Can you wipe your data, flash back to stock firmware, go to Settings>About tablet>Status, and take a screenshot that shows the "Up time" of the tablet, go through your suggested date-spoofing method, then if OEM Unlock appears, take another screenshot of your tablet's up time, and one screenshot of your developer options menu.
I'm not calling you a liar, it's just that this and similar methods haven't worked for me and haven't been confirmed as working by anyone else yet. If it actually works, then great, but it's not working for me, so I'd like to pinpoint the problem and solve it.
Click to expand...
Click to collapse
did you clear out your storage cache after changing the date and then turn on developer options?
what build are you working with btw.
Trying this on round two after root yielded no results. I also tried the clear cache method from your post I found which has a MUCH more consistent process to follow and still got nothing.
Perhaps starting from the bottom would be beneficial here.
Flash stock with odin --> find method that works --> add to root process.
It adds two more steps but that seems like a small price for consistency.
This is f***ing infuriating.
7r33
capriorn1971ad said:
did you clear out your storage cache after changing the date and then turn on developer options?
what build are you working with btw.
Click to expand...
Click to collapse
Yes, I tried that as well and it didn't work. Are you suggesting that this has worked for you? If so, can you reset your tablet right now and try it again to confirm?
I'm using the same build you are using, NMF26X.T380DXU1ARB3
Evul1 said:
Yes, I tried that as well and it didn't work. Are you suggesting that this has worked for you? If so, can you reset your tablet right now and try it again to confirm?
I'm using the same build you are using, NMF26X.T380DXU1ARB3
Click to expand...
Click to collapse
thats quite a bit of work to do, but yes it worked for me.
I was planning on writing a guide on rooting this and what to do if and when it fails in laymans terms and utilizing this, but if it isn't working for everyone.. if it isn't the cache then what is causing it to show for some and not others?
to do the guide i was going to start from a failed installation so i could write part 2 first and finish with part 1 (the actual initial rooting), which would require me to reset the tablet but if this isn't working right.. then i need to hold off on that idea.
maybe i should just do it and spend my day tearing around on that, sounds fun and all but i have to go to Burbank tomorrow to sign up at Central Casting (they are actually looking for someone like me right now, i am going with inside information) and it will be an all day endeavor, tuesday would be much better for me in truth, that allows me to use that tablet while i wait, and i will have hours to wait, but of course with my luck they will call me wednesday and null and void that.
B1G7r33! said:
Trying this on round two after root yielded no results. I also tried the clear cache method from your post I found which has a MUCH more consistent process to follow and still got nothing.
Perhaps starting from the bottom would be beneficial here.
Flash stock with odin --> find method that works --> add to root process.
It adds two more steps but that seems like a small price for consistency.
This is f***ing infuriating.
7r33
Click to expand...
Click to collapse
when you flash stock, restart the device and set the date back 2 months, then do a factory reset AFTER that and it will work.
after rooting it DO NOT reboot it until the OEM unlock shows up again, you can't rely on a method to bypass the second 7 days that requires rebooting, it null and voids the rooting by doing such.
this tablet is awefully touchy, i lost root 2 1/2 weeks after rooting and being able to reboot having OEM unlock showing and all.. but i didn't set up magiskhide..
don't know how the tablet detected it and figured it out..
yes it is infuriating, least you have company to work on it with..
capriorn1971ad said:
thats quite a bit of work to do, but yes it worked for me.
I was planning on writing a guide on rooting this and what to do if and when it fails in laymans terms and utilizing this, but if it isn't working for everyone.. if it isn't the cache then what is causing it to show for some and not others?
to do the guide i was going to start from a failed installation so i could write part 2 first and finish with part 1 (the actual initial rooting), which would require me to reset the tablet but if this isn't working right.. then i need to hold off on that idea.
maybe i should just do it and spend my day tearing around on that, sounds fun and all but i have to go to Burbank tomorrow to sign up at Central Casting (they are actually looking for someone like me right now, i am going with inside information) and it will be an all day endeavor, tuesday would be much better for me in truth, that allows me to use that tablet while i wait, and i will have hours to wait, but of course with my luck they will call me wednesday and null and void that.
Click to expand...
Click to collapse
It shouldn't be that much work at all if your method to get OEM Unlock to display actually works, as your bootloader will then be unlocked and you can immediately re-root, re-flash TWRP, and restore a nandroid backup. Rooting this tablet [flashing TWRP and su and/or magisk and/or a nandroid image] is actually quite simple and can be done in 5 minutes once you have OEM Unlock displayed.
You certainly wouldn't need a whole day just to try this. But I understand. Samsung's security nonsense makes the initial root of this tablet rather fragile if you don't know all the potential roadblocks beforehand. And a comprehensive root guide that explains all of this would certainly help people looking to root this tablet, so I don't want to rush you.
capriorn1971ad said:
when you flash stock, restart the device and set the date back 2 months, then do a factory reset AFTER that and it will work.
after rooting it DO NOT reboot it until the OEM unlock shows up again, you can't rely on a method to bypass the second 7 days that requires rebooting, it null and voids the rooting by doing such.
this tablet is awefully touchy, i lost root 2 1/2 weeks after rooting and being able to reboot having OEM unlock showing and all.. but i didn't set up magiskhide..
don't know how the tablet detected it and figured it out..
yes it is infuriating, least you have company to work on it with..
Click to expand...
Click to collapse
I found out the reboot after root no-no the hard way, lol.
After playing with it all day today, I think you're on the right path with it being application based. If we could log which run before and after, the chances of finding it and being able to adb uninstall/disable would be significantly increased.
So what can be used to low-level log WITHOUT root?
B1G7r33! said:
I found out the reboot after root no-no the hard way, lol.
After playing with it all day today, I think you're on the right path with it being application based. If we could log which run before and after, the chances of finding it and being able to adb uninstall/disable would be significantly increased.
So what can be used to low-level log WITHOUT root?
Click to expand...
Click to collapse
don't think we can really.
trial and error..
thought i was on the right path earlier, but if it didn't work for you then it isn't the solution, cause the solution will work for everyone.
has to be some small thing were overlooking i would assume.
I worked for Metricom through Verso Technologies back in the late 90's, the first coast to coast wireless provider, had dealings with the big wigs and all, but they always opted for less security and more accessibility in most everything pertaining to networking, always afraid to give up backdoors.
i need to go back to what you said too and see what slight differences there are, did you have any luck this time around? was it repeatable?
sucks to know i am going to have to root to cause a failure to try to bypass and root again only to cause a second failure to verify, and to get it right it is going to take that really, the bypass has to be repeatable, i think setting the date back before the systems restore is key to it, but i could be wrong.
if you would lose root and be able to get it pass the first 7 days OEM unlock then your good, because even if you can't get the second, and something goes wrong to where you need it, your gonna have to wipe anyways, which means you just wipe, set date back and then do the factory reset, not being able to reboot afterwards until the OEM unlock appears and not being able to advance it through the last 7 days means little so long as the root is good and right, funny thing really, took me a while to realize that, there is no real need to rush the second 7 days, only the first 7, but it would be nice to be able to reboot it again afterwards, the same day, and not have to worry about it anymore, but like i said earlier, i got detected somehow and lost root still., wish i knew how.
that's alot of my problem though, i do things and try to document them afterwards rather than as, and i am not 20 years old anymore with a mind like a razor, it's just a serrated steak knife now at almost 50, wish i wasn't like that, because i lose bits and pieces as i go.
so if my tablet auto updates to Oreo 8.1 ... then i'm SOL huh?
Hi!,
I'm a long-time reader of this forum, but this is my first post. In the last few days, something happened (I wish I could pinpoint exactly what) where I ended up restarting my phone and it entered a continuous boot loop. The phone was receiving updates per normal and may have received an update not that long ago that required some kind of restart, but I'm not confident about that. Either way, the phone was restarted and it entered into a permanent boot loop.
Before restarting, I'm confident the "ear sensor" that turns the screen off when I'm on a call as functioning. I'm also confident the auto-rotate functionality of the phone was working perfectly.
After I tried to factory reset the phone from the power-volume reset options, I actually ran into a TON of trouble trying to get the phone to properly reset. It tooks me countless tries to eventually get the phone to start after resetting it over and over again. I was stuck trying to get the phone to actually move through the setup steps. SUPER frustrating. I actually went to sleep while the phone was somewhere in the middle of setting up and when I woke up the phone somehow eventually made it through some setup steps.
I'm now using the phone as I normally would, but it's very odd. The phone is a LOT more unstable. At least 3 of the sensors I had working have just completely stopped working.
The phone is in otherwise perfect condition. I'm genuinely confused about how I should go about trying to resetting this thing to a pure stock configuration and slowly installing apps again to make the experience what I'd want.
And no, I'm not a super power user. I am a strong engineer happy to do crazy things like flashing bootloaders and whatnot, but I'm honestly confused about where to start. I understand other versions of this device may have had corrupted persist partitions during updates -- those problems seem like my problems -- but I don't know how I should go about simply flashing my phone at the lowest level into something stock that I can try to build back from.
And obviously when talking to google support their suggsetion is that I mail them the device and wait 10 days without a phone. I'm confused about how that could EVER be a reasonable way to get a phone repaired, sigh -- phones are not toys, they're pretty critical to the day-to-day work of so many people including myself. I'm pretty disappointing with that approach from Google and I had always considered them much better than that before this experience.
Anyway, I'm really lost and I'd love to understand how to repair the software on my phone.
(You all kick ass!)
aliljet said:
Hi!,
I'm a long-time reader of this forum, but this is my first post. In the last few days, something happened (I wish I could pinpoint exactly what) where I ended up restarting my phone and it entered a continuous boot loop. The phone was receiving updates per normal and may have received an update not that long ago that required some kind of restart, but I'm not confident about that. Either way, the phone was restarted and it entered into a permanent boot loop.
Before restarting, I'm confident the "ear sensor" that turns the screen off when I'm on a call as functioning. I'm also confident the auto-rotate functionality of the phone was working perfectly.
After I tried to factory reset the phone from the power-volume reset options, I actually ran into a TON of trouble trying to get the phone to properly reset. It tooks me countless tries to eventually get the phone to start after resetting it over and over again. I was stuck trying to get the phone to actually move through the setup steps. SUPER frustrating. I actually went to sleep while the phone was somewhere in the middle of setting up and when I woke up the phone somehow eventually made it through some setup steps.
I'm now using the phone as I normally would, but it's very odd. The phone is a LOT more unstable. At least 3 of the sensors I had working have just completely stopped working.
The phone is in otherwise perfect condition. I'm genuinely confused about how I should go about trying to resetting this thing to a pure stock configuration and slowly installing apps again to make the experience what I'd want.
And no, I'm not a super power user. I am a strong engineer happy to do crazy things like flashing bootloaders and whatnot, but I'm honestly confused about where to start. I understand other versions of this device may have had corrupted persist partitions during updates -- those problems seem like my problems -- but I don't know how I should go about simply flashing my phone at the lowest level into something stock that I can try to build back from.
And obviously when talking to google support their suggsetion is that I mail them the device and wait 10 days without a phone. I'm confused about how that could EVER be a reasonable way to get a phone repaired, sigh -- phones are not toys, they're pretty critical to the day-to-day work of so many people including myself. I'm pretty disappointing with that approach from Google and I had always considered them much better than that before this experience.
Anyway, I'm really lost and I'd love to understand how to repair the software on my phone.
(You all kick ass!)
Click to expand...
Click to collapse
I would try flashing the latest factory image via fastboot.
[Guide] Root Pixel 4 XL with Magisk Android 13
[Guide] Root Pixel 4 XL With Magisk Android 13 Android Security Bulletin—Feburary 2023 Pixel Update Bulletin—Feburary 2023 Introduction This Guide is for Pixel 4 XL owners that want to Root their phone, and enjoy the benefits of rooting it. The...
forum.xda-developers.com
https://forum.xda-developers.com/t/guide-unlock-flash-root-for-the-pixel-2-xl-taimen.3702418/ (This is for a Pixel 2 XL but the process is the same. It's basically a condensed version of the one above.)
aliljet said:
Hi!,
I'm a long-time reader of this forum, but this is my first post. In the last few days, something happened (I wish I could pinpoint exactly what) where I ended up restarting my phone and it entered a continuous boot loop. The phone was receiving updates per normal and may have received an update not that long ago that required some kind of restart, but I'm not confident about that. Either way, the phone was restarted and it entered into a permanent boot loop.
Click to expand...
Click to collapse
You did not provide the most important information we need- whether your phone is bootloader unlocked. Probably not, otherwise you would have already flashed it with a full Google image, which returns the phone to "out of the box" condition. You need to determine whether you can unlock your bootloader. If you cannot unlock (allow oem unlock is off and or greyed out in Dev options) then you will not be able to fastboot flash ANYTHING. If that is your case, the next best thing is flashing a full OTA image (sometimes called a rescue OTA) from recovery mode using the OTA via ADB option. This means you need fastboot/adb installed and working on your PC. Instructions on how are on the same Google dev page for OTA's.
So, my phone's bootloader is not unlocked. But I have an update for the crowd that may one day find this. I know your frustration and I can report that my phone is once again fixed.
A day (or two) after I sent this, a set of updates came down to my phone. And WebView was updated. That restored all of my sensors and also restored most of my crashing applications. It was an incredibly odd experience.
My phone once again functions. And the nightmare of owning a Google phone and talking to Google support has ended.