Database Develop

[ROM][CM12.1][N801x][N8000][BETA][27/10/2015] lollipop

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.0, which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community.
It can be used without any need to have any Google application installed.
CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
STATUS: BETA
This is a preview build, do not install it if you want a stable ROM.
This is a preview of what is going down on CM12.1
Rom is in beta state so many bugs are to be expected!
All the source code is available on my Github.
I do this on my free time and unfortunately I don't have much.
Any help is a appreciated!
I don't own N8000 device, so all RIL is untested, some may find it works, other may find it does not.
LINKS IN SECOND POST
Source code: https://github.com/lirokoa
CREDITS:
The whole Cyanogenmod team
Special thanks @dhiru1602 for his awesome work on exynos 4
All people who works on the Exynos 4 SOC, they desserve it
XDA:DevDB Information
CM12.1 N8013/N8010/N8000, ROM for the Samsung Galaxy Note 10.1
Contributors
lirokoa
Source Code: https://github.com/lirokoa
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.0.x
Version Information
Status: No Longer Updated
Created 2015-04-13
Last Updated 2015-12-30

DOWNLOAD LINKS:
-27/10/2015:
N8013/N8010: http://forum.xda-developers.com/devdb/project/dl/?id=14927
N8000: http://forum.xda-developers.com/devdb/project/dl/?id=14928
Changelog:
- Kernel: Many fix, check github for full list
- Display: Refresh rate is now 60htz (was 55 htz)
- io scheduler is now BFQ by default (should improve multitasking)
- Fix chromecast screen mirroring
- Updated audio HAL
- Reworked SELinux
- SKIA hardware optimisation
- Upstream CM changes.
Old releases :
-24/09/2015:
N8013/N8010: http://forum.xda-developers.com/devdb/project/dl/?id=14521
N8000: http://forum.xda-developers.com/devdb/project/dl/?id=14533
Changelog:
- Kernel: Rebased on N8010 kitkat official samsung source (before was based on n7100 kernel)
- Kernel: Updated lowmemory killer
- Kernel: Updated binder
- Kernel: Added BFQ io scheduler (not really stable, be aware if you decide to use it)
- Netflix should be fixed once again
- Enable dex-preoptimization to speed up first boot sequence
- Removed timeout in dex2oat
- Upstream CM changes.
-28/08/2015:
N8013: http://forum.xda-developers.com/devdb/project/dl/?id=14203
N8000: http://forum.xda-developers.com/devdb/project/dl/?id=14210
Changelog:
- Upstream CM changes.
-03/06/2015:
N8013: http://forum.xda-developers.com/devdb/project/dl/?id=12826&task=get
N8000: http://forum.xda-developers.com/devdb/project/dl/?id=12829&task=get
Changelog:
- Netflix fix
- Miracast / chromecast screen casting speed improvement
- Seeking video in web browser working
- Misc changes
- RIL (N8000), some try to fix call / networking scanning
- Upstream CM changes.
-08/05/2015:
N8013: http://forum.xda-developers.com/devdb/project/dl/?id=12375
N8000: http://forum.xda-developers.com/devdb/project/dl/?id=12377
Changelog:
- Misc. bug fixes
- Upstream CM changes.
-23/04/2015:
Before installing read carefully this post
N8013: http://forum.xda-developers.com/devdb/project/dl/?id=12106
N8000: http://forum.xda-developers.com/devdb/project/dl/?id=12108
Changelog:
- Android 5.1.1
- SELinux set to enforcing
- Fixed crash when screen timeout is set to 30 min.
- Upstream CM changes.
-17/04/2015:
N8000: https://mega.co.nz/#!qQ1TVJYZ!1CS7UxGw_ntbd-bT9J0xnH0MyAmqJwneD4ZkqX23bBY
Changelog:
- Initial release (call seems to be not working)
-13/04/2015:
N8013: https://mega.co.nz/#!CUcTCAJB!YzWpI6XWkMGCwTPjT9-G7ZCiM7zF6tVYwAVGQfLujhU
Changelog:
- Initial release

FAQ:
Which Gapps to use? the one officially supported by Cyanogenmod, you can get them here
After installing ROM + Gapss, GApps keep crashing: Just update your recovery with the provided twrp.
Keyboard does not work: enable hardware keyboard in settings.
Google chrome got graphics glitches: just disable #enable-gpu-rasterization in chrome://flags
If you don't want to see cursor while using S-Pen, you can disable it it in settings / inputs
If you have trouble with video playback you can try to disable NuPlayer in developer settings
KNOWN BUGS:
N8000: scan network
Enabled NON PIE executable to be executed (needed for GPS)
I probably forget many

Tried to upload few times this evening, and xda servers keep crashing, will try again tomorrow morning.

What about N8000?

mysarasaid said:
What about N8000?
Click to expand...
Click to collapse
lirokoa said:
FAQ:
[*] N8000 will be added when N801x is in good shape.
Click to expand...
Click to collapse
---------- Post added at 09:04 PM ---------- Previous post was at 09:03 PM ----------
Can you tell me if I can just overwrite my CM12 with this CM12.1 and do Wipe Cache? (I know I can't report bugs without all wipes, I just want to know if I can do that or it won't boot)

Build is up, but I had to up it on mega...
Enjoy

Smoother than BlissPop V2.3 ... Love it ...
Thx a lot ^_^ ...

Rotation Issue
Great 5.1 ROM to kick off. Thanks
The screen rotation will only disable into landscape mode. It is does not seem possible to disable rotate into portrait mode only.
Did I miss something?
Thanks

Installed just now. Rom feels a lot more snappy and much smoother animations than before. I have a bad habbit now of opening and closing the notification bar now just on how silky smooth it is. Great work

Sylheti said:
Great 5.1 ROM to kick off. Thanks
The screen rotation will only disable into landscape mode. It is does not seem possible to disable rotate into portrait mode only.
Did I miss something?
Thanks
Click to expand...
Click to collapse
Nop, it's probably a bug in CM. Keep in mind that cm12.1 did not reach nightly build yet. So those build are a kind of preview.
Sent from my GT-P5110 using XDA Free mobile app

Using camera may cause system reboot.
The first time reboot when I used build-in camera app. (almost no other apps installed except gapps)
The second time reboot when I used google camera installed from google play market.
Bluetooth audio may cause sound glitch.
It seems CM12's problem. Changing performance option to Performace may reduce bluetooth sound problem.
BTW, use 5G WIFI seems also reduce bluetooth sound problem.

So far good, it is a keeper for now ?

One bug
Configuration crashs when I try to raise screen timeout to 30 minutes.

Does HDMI work?
I tried once unsuccessfully.
I am a n8010 user

Added link for N8000 in 2nd post.
This is early build, and call seems to be not working but 3G is.
Please report with logcat and radio logcat if you get some trouble (especially for phone call).

lirokoa said:
Added link for N8000 in 2nd post.
This is early build, and call seems to be not working but 3G is.
Please report with logcat and radio logcat if you get some trouble (especially for phone call).
Click to expand...
Click to collapse
thank you very much
Need Full Wipe to install over the CM12?

juniorhxcx said:
thank you very much
Need Full Wipe to install over the CM12?
Click to expand...
Click to collapse
You should be able to update without wiping.

lirokoa said:
You should be able to update without wiping.
Click to expand...
Click to collapse
I did not Update Full Wipe and starts normally.
However, I believe the Gapps he had used in CM12 (used PA GAAP) was incompatible with the CM12.1. For some App have forced closure beyond the keyboard does not appear.
So I performed a clean installation, with GAAP basis 20150417 and everything works great. Thank you!

juniorhxcx said:
I did not Update Full Wipe and starts normally.
However, I believe the Gapps he had used in CM12 (used PA GAAP) was incompatible with the CM12.1. For some App have forced closure beyond the keyboard does not appear.
So I performed a clean installation, with GAAP basis 20150417 and everything works great. Thank you!
Click to expand...
Click to collapse
Yes, gapps need to be updated.
Sent from my Nexus 4 using XDA Free mobile app

[UNOFFICIAL][OMS][ROM] LineageOS 14.1 for Grand Prime [SM-S920L|G530MU/FZ/P/T/T1/W]

Code:
** Disclaimer
I am not responsible if flashing this ROM bricks your
phone or causes thermonuclear war and ends the
world as we know it. You have been warned.
ROM Information
ROM Target Device: Samsung Galaxy Grand Prime SM-S920L | SM-G530MU | SM-G530FZ | SM-G530P | SM-G530T | SM-G530T1 | SM-G530W
ROM Status: Stable
ROM OS: LineageOS 14.1
Project GitHub Repositories: https://github.com/Galaxy-MSM8916
Project Gerrit Review site: https://review.msm8916.com/
Telegram Channel (for ROM build/completion notifications): https://telegram.me/Samsung_MSM89XX
Telegram Group (for Q&A): https://telegram.me/joinchat/AJrZvz_pGY7Pvfis9kzMwA
Bug reports: https://bugs.msm8916.com/
Click to expand...
Click to collapse
Device Names
Verify your device codename before downloading any firmwares or recovery images!
Code:
[B]SM-S920L[/B] - [COLOR="DarkSlateBlue"][B]gprimeltetfnvzw[/B][/COLOR]
[B]SM-G530MU[/B] - [COLOR="DarkSlateBlue"][B]gprimeltezt[/B][/COLOR]
[B]SM-G530FZ[/B] - [COLOR="DarkSlateBlue"][B]gprimeltexx[/B][/COLOR]
[B]SM-G530T/T1/W[/B] - [COLOR="DarkSlateBlue"][B]gprimelte[/B][/COLOR]
[B]SM-G530P[/B] - [COLOR="DarkSlateBlue"][B]gprimeltespr[/B][/COLOR]
Click to expand...
Click to collapse
Download
All builds: https://download.msm8916.com/
Jenkins Builds: https://jenkins.msm8916.com/job/LineageOS_Builds/job/Samsung_Galaxy_GRAND_Prime/
TWRP Builds: https://jenkins.msm8916.com/job/TWRP_Builds/
GApps: http://opengapps.org/?arch=arm&variant=micro&api=7.1
RSS: https://jenkins.msm8916.com/job/LineageOS_Builds/job/Samsung_Galaxy_GRAND_Prime/rssLatest
Click to expand...
Click to collapse
Instructions
If you are completely new to flashing custom ROMs and have no idea how to begin, start by downloading a TWRP image for your device from the links above and flash it using the ODIN tool (see below).
You cannot flash a custom ROM over stock recovery, so downloading a custom recovery is the first thing you will need to do.
Click to expand...
Click to collapse
Installation via recovery (TWRP/LineageOS Recovery)
* Download a recent .zip file from the links above for your device.
* Reboot into recovery mode [Press Power+Volume Up+Home].
* Wipe your data and cache partition (equivalent to doing a Factory Reset)
if you are coming from a stock ROM.
* Either: Plug in your phone into your computer, copy the zip file to a location on your Internal or External Storage on a device, click Install on TWRP on your phone and locate the zip file in the phone, or:
* Plug in your phone into your computer, and open Advanced->ADB Sideload on TWRP on your phone and swipe the slider to enter sideload mode.
Then open a command prompt/terminal on your computer in the folder you put the file by Shift-Clicking (Shift+Right Click) and selecting "Open Command Prompt/Terminal Here" (you will need to have adb installed) and type:
adb sideload name_of_zip.zip
to sideload the file. Replace name_of_zip.zip with the name of the file. If you are running Linux you may need to type adb kill-server and use sudo adb sideload if you get an `Insufficient Permissions` error.
* Download and flash GApps in the same way.
Click to expand...
Click to collapse
How to provide logcats
Under Windows:
Code:
[B]* Install samsung device drivers and then
the adb utils from here:[/B]
[url]https://forum.xda-developers.com/showthread.php?t=2588979[/url]
[b]* Then enable developer mode, connect your phone to usb,
and from [B]cmd[/B] paste this command:[/b]
[I]adb logcat > %userprofile%/Desktop/logcat.txt[/I]
[b]then try to reproduce the bug.[/b]
[b]* The logcat file will be on your desktop.[/b]
Under Linux:
Code:
[b]* Install the adb utils from your distribution's
package manager and execute the command:[/b]
[I]adb logcat > ~/logcat.txt[/I]
[b]then try to reproduce the bug.[/b]
[b]* The logcat file will be on your home directory.[/b]
* Create a bug report at https://bugs.msm8916.com/ and paste the logcat there.
* If you cant connect the device through adb on windows because the drivers, connect the device over wifi, enable adb over network on the quick setting tiles, and type:
Code:
adb connect [ip address here]
And then the adb logcat command for windows.
Click to expand...
Click to collapse
Changelog
For more detailed changelog information, see the changelog on the download or jenkins servers for each specific build.
Code:
[B][U]29/08/2017[/U][/B]
* [B][[COLOR="Red"]NOTE[/COLOR]][/B] [B] Shifted to using a kernel driver for disabling touch devices
when the screen is off instead of a user service for that. [/B]
* [B][[COLOR="Red"]NOTE[/COLOR]][/B] [B] Updated kernel to the latest upstream AOSP and
CAF tags. There should be a noticeable performance boost. [/B]
* [B][[COLOR="Red"]NOTE[/COLOR]][/B] [B] Shifted to using OSS GPS code instead of prebuilt libs.
Location applications should be getting and reporting
satellite fix information properly. [/B]
* [B][[COLOR="Red"]NOTE[/COLOR]][/B] [B] Disabled cpusets support, which was slowing
down the system performance. [/B]
* [B][[COLOR="Red"]FIX[/COLOR]][/B] [B] The auto time zone feature should now be working
proper, (that is, without resetting the time zone
to 0000 UTC).[/B]
* [B][[COLOR="Red"]FIX[/COLOR]][/B] [B] Data should be working fully on all devices. [/B]
Code:
[B][U]22/08/2017[/U][/B]
* [B][[COLOR="Red"]FIX[/COLOR]][/B] [B] SM-G530MU and SM-S920L builds now boot [/B]
Code:
[B][U]08/06/2017[/U][/B]
* [B][[COLOR="Red"]FIX[/COLOR]][/B] [B] Video recording should now be working [/B]
* [B][[COLOR="Red"]FIX[/COLOR]][/B] [B] The "message not sent" bug in text messaging
app(s) should be gone. [/B]
Code:
[B][U]01/06/2017[/U][/B]
* [B][[COLOR="Red"]NOTE[/COLOR]][/B][B] Updated kernel and prima (wifi)
driver to the latest caf branch LA.BR.1.2.9_rb1.18[/B]
* [B][[COLOR="Red"]FIX[/COLOR]][/B] [B] The reboots caused by errors in the
prima kernel driver should be gone.[/B]
* [B][[COLOR="Red"]FIX[/COLOR]][/B] [B] F2FS should work completely now.
Updated F2FS code from upstream kernel sources and enabled
security extended attribute support (for SElinux) to fix
android support.[/B]
Code:
[B][U]15/05/2017[/U][/B]
* [B][[COLOR="Red"]NOTE[/COLOR]][/B][B] Wifi driver is now built-into the kernel again.[/B]
* [B][[COLOR="Red"]FIX[/COLOR]][/B][B] The sleep issue should be fixed in the latest build.
This was due to the failure to set a critical kernel
variable at boot because the kernel init system was
not interpreting a boot command line variable correctly.[/B]
* [B][[COLOR="Red"]FEATURE[/COLOR]][/B][B] OMS/Substratum support is now built into the
ROM.[/B]
* [B][[COLOR="Red"]FIX[/COLOR]][/B] [B] F2FS is enabled in-kernel, so F2FS filesystem
mounting and formatting should be working fully.[/B]
Code:
[B][U]05/05/2017[/U][/B]
* [B][[COLOR="Red"]NOTE[/COLOR]][/B][B] Wifi driver is being built as a module for now,
transitioning to a new kernel somehow broke the ability to build
it into the kernel binary.[/B]
* [B][[COLOR="Red"]NOTE[/COLOR]][/B][B] Transitioned to a new kernel based on T560NU and
J500H MM kernel sources (J500HXXU2BPJ9 and T560NUUES1BPL1). [/B]
* [B][[COLOR="Red"]FIX[/COLOR]][/B] [B] In-call audio should now work fully without having to
toggle the loudspeaker. [/B]
* [B][[COLOR="Red"]NOTE[/COLOR]][/B][B] Updated kernel and wifi driver to LA.BR.1.2.9_rb1.16[/B]
* [B][[COLOR="Red"]FIX[/COLOR]][/B] [B] Vibration should be working for SM-G530MU. The kernel
config now specifies the correct vibration driver. [/B]
Code:
[B][U]14/04/2017[/U][/B]
* [B][[COLOR="Red"]NOTE[/COLOR]][/B][B] Wifi driver is now built into the kernel. Should
(slightly) improve speed of enabling/disabling wifi. [/B]
* [B][[COLOR="Red"]NOTE[/COLOR]][/B][B] Updated kernel and wifi driver to LA.BR.1.2.9_rb1.14[/B]
* [B][[COLOR="Red"]FIX[/COLOR]][/B][B] Updated RIL in-call audio fix, microphone should now
work proper after the regression from last build.[/B]
* [B][[COLOR="Red"]NOTE[/COLOR]][/B][B] Builds now use sdcardfs from Google. This should
result in faster file operations on the sdcard overall
compared to using FUSE as an overlay.[/B]
* [B][[COLOR="Red"]NOTE[/COLOR]][/B][B] There have been several other changes as well,
mostly to the underlying structure of the kernel and device trees.[/B]
Code:
[B][U]01/04/2017[/U][/B]
* [B][[COLOR="Red"]FIX[/COLOR]][/B] [B] LineageOS updater can reboot to recovery properly.[/B]
Code:
[B][U]30/03/2017[/U][/B]
*[B][[COLOR="Blue"]FIX[/COLOR]][/B][B]Data and SMS should be functional on all devices.
You may need to set APN settings again and reboot for data to work.[/B]
Code:
[B][U]28/03/2017[/U][/B]
*[B][[COLOR="Blue"]NOTE[/COLOR]][/B][B]Added SM-G530MU.[/B]
*[B][[COLOR="Blue"]FIX[/COLOR]][/B][B]Data and in-call audio should be functional
on all devices.[/B]
Code:
[B][U]26/03/2017[/U][/B]
*[B][[COLOR="Blue"]NOTE[/COLOR]][/B][B]SM-G530FZ builds *should* be functional.[/B]
Code:
[B][U]09/03/2017[/U][/B]
*[B][[COLOR="Blue"]NOTE[/COLOR]][/B][B] Added SM-G530FZ.[/B]
* [B][[COLOR="Red"]FIXED[/COLOR]][/B] [B] Rear camera view in Snap camera was distorted. Now fixed. [/B]
Code:
[B][U]16/02/2017[/U][/B]
*[B][[COLOR="Blue"]NOTE[/COLOR]][/B][B] Unified the T/T1/W into one image. They are essentially the same device.
This should simplify development on my part and make it easier for everyone to
get the updates. And I can also be absolutely sure about bugs
since we'll be using the same image. [/B]
*[B][[COLOR="Blue"]NOTE[/COLOR]][/B][B] Decreased minimal scaling freq. to 200Mhz.
The previous scaling frequency minimum of 800Mhz was pretty high,
and could quickly cook your phone and kill power on mobile devices.
Lowering to 200Mhz should significantly extend batery life
on the stock scheduler. [/B]
There are a lot more minor tweaks and fixes. I don't have the time to constantly be updating this; I expect you'll read the
changelogs anyways since I take my time to write the commit messages in detail.
Code:
[B][U]12/01/2017[/U][/B]
* [B][[COLOR="Red"]FIX[/COLOR]][/B] [B] Bluetooth is now working across all builds. [/B]
Code:
[B][U]12/01/2017[/U][/B]
*[B][[COLOR="Blue"]NOTE[/COLOR]][/B][B] First images built. [/B]
Code:
[B][U]11/01/2017[/U][/B]
*[B][[COLOR="Blue"]NOTE[/COLOR]][/B][B] Finished merging Qualcomm (CAF) LA.BR.1.2.9_rb1.11 kernel into device kernel. [/B]
Code:
[B][U]10/01/2017[/U][/B]
*[B][[COLOR="Blue"]NOTE[/COLOR]][/B][B] Refactored the project repositories. [/B]
*[B][[COLOR="Blue"]NOTE[/COLOR]][/B][B] Migrated repositories to new GitHub page. [/B]
Code:
[B][U]20/01/2017[/U][/B]
*[B][[COLOR="Blue"]NOTE[/COLOR]][/B][B] Made some substantial changes to our build infrastructure,
which should make my life substantially easier and
using Jenkins and all a more pleasant experience. [/B]
Known Issues
Code:
[COLOR="RoyalBlue"][B]All devices[/B][/COLOR]
* [B][[COLOR="Red"]NOTE[/COLOR]][/B] [B] None[/B]
Features
Code:
* OMS/Substratum theming support.
* The usual LineageOS features.
* All builds support over-the-air updates.
FAQ
Q: Are you taking device requests?
A: If and only if the device is using an msm8916 chip, and you're willing to buy me/donate the device for testing, sure.
Q: But I don't have that kind of money! What else?
A: Alternatively, if you're skilled with Linux and adb, and have an unsupported device, if you're willing to work with me as a tester, that works as well.
Q: Are you accepting feature requests?
A: Unless you're willing to implement it yourself, no.
Q: Can you make XXX ROM as well as LOS?
A: Unless more people donate, no. I simply don't have the time to maintain more than LOS nor money to hold that many ROMs on my already (tiny) struggling server.
Q: Can I throw money at you?
A: Most certainly. Donations are always welcome.
Click to expand...
Click to collapse
You want to help?
We need hardware power to get the builds done.
If you want to help us go faster, send a PM to @kentone or
@vince2678. Your computer will act as a client for our jenkins server.
In a perfect world, that would be all, but unfortunately no. We need money to keep the server running and keep bringing these ROMs.
As always, logcat any problem you find.
Click to expand...
Click to collapse
PLEASE, don't PM @vince2678, as he's busy right now, and your questions can be not answered. PM @kentone instead, write here on the post, or on the telegram group, your questions will be responded as soon as we can Understand that we have family, studies and jobs aside of this project. Thanks for your understanding
XDA:DevDB Information
[UNOFFICIAL][OMS][ROM] LineageOS 14.1 for Grand Prime [SM-S920L|G530MU/FZ/P/T/T1/W], ROM for the Samsung Galaxy Grand Prime
Contributors
kentone, vince2678
Source Code: https://github.com/Galaxy-MSM8916
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: >= 4.4 (KitKat)
Based On: LineageOS
Version Information
Status: Stable
Stable Release Date: 2017-06-08
Created 2017-01-11
Last Updated 2018-08-10

Reserved

Great Share ✌ But not for people who have smg531f device I cant buy you one xD instead i would buy a new.

Link to download cm 14?

biga1 said:
Link to download cm 14?
Click to expand...
Click to collapse
They are currently created and building the ROM. It should be out around next months or so. Hope you understand.

Slenderman8090 said:
They are currently created and building the ROM. It should be out around next months or so. Hope you understand.
Click to expand...
Click to collapse
No I don't understand. Please explain.

biga1 said:
No I don't understand. Please explain.
Click to expand...
Click to collapse
Biga1, as the Kernel code for Samsung is outdated somewhat. Nouget is created by hand for this device.

Slenderman8090 said:
Biga1, as the Kernel code for Samsung is outdated somewhat. Nouget is created by hand for this device.
Click to expand...
Click to collapse
OK. I saw the thread with download instructions and like an idiot searched for a link. My bad for reading the OP.

Why does it say 6.0 in the rom os version? Isnt this nougat lol

bassem763 said:
Why does it say 6.0 in the rom os version? Isnt this nougat lol
Click to expand...
Click to collapse
Generally, people do make mistakes. But yes, I agree that is misleading. Dev, if you are able to.. Please change OS Version to 7.0 Nougat.

Slenderman8090 said:
Generally, people do make mistakes. But yes, I agree that is misleading. Dev, if you are able to.. Please change OS Version to 7.0 Nougat.
Click to expand...
Click to collapse
Fixed.

Sorry for bugging but just a question are you guys going to change the sources from cm to lineage os or nah

bassem763 said:
Sorry for bugging but just a question are you guys going to change the sources from cm to lineage os or nah
Click to expand...
Click to collapse
The only difference for now between the two is in name, so no.

vince2678 said:
The only difference for now between the two is in name, so no.
Click to expand...
Click to collapse
True lol

CyanogenMod 14.1 is being uploaded for SM-G530W Currently. Estimated wait, around an hour or so.
UPDATE: SM-G530W has been uploaded and finished.

Fm Radio does not work on mine , getting error msg " FM operation failed. If the problem persists, pls turn off FM and turn it back on" . My Android version shows up as 6.0.1 . "CM version is 13.0-20170118-NIGHTLY-gprimeltetmo" > Could not install pico Gapps version 6.0 or 7.1 getting error that wrong version. So not sure if you have actually fixed the name change to reflect Nougat. Have an sm-g530t

shakazoid said:
Fm Radio does not work on mine , getting error msg " FM operation failed. If the problem persists, pls turn off FM and turn it back on" . My Android version shows up as 6.0.1 . "CM version is 13.0-20170118-NIGHTLY-gprimeltetmo" > Could not install pico Gapps version 6.0 or 7.1 getting error that wrong version. So not sure if you have actually fixed the name change to reflect Nougat. Have an sm-g530t
Click to expand...
Click to collapse
That's CyanogenMod 13.0 you're running there mate, not CYanogenMod 14.1. The only device for which a CM14.1 exists is the G530W at the moment. You'll be alerted when building starts for everything else.

Stuck on Samsung boot screen. Tried three downloads.

vince2678 said:
That's CyanogenMod 13.0 you're running there mate, not CYanogenMod 14.1. The only device for which a CM14.1 exists is the G530W at the moment. You'll be alerted when building starts for everything else.
Click to expand...
Click to collapse
Thanks for the response.

shakazoid said:
Thanks for the response.
Click to expand...
Click to collapse
Shakasoid, I will be announcing updates for various models once they are readily available.
Update: LineageOS 14.1 should be out within 3 weeks.

[ROM][ham][7.1.x][OFFICIAL][WEEKLIES] Lineage Android Distribution for ZUK Z1

LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
KNOWN ISSUES
- Report with logs
!!! BUG REPORTS WITHOUT LOGS WILL BE IGNORED !!!
Android: adb logcat
Radio: adb logcat -b radio
Kernel: adb shell dmesg
Full Bugreport: Developer Menu -> Bugreport
HOW TO INSTALL LINEAGEOS
- Make sure your phone is running the firmware last shipped on cm-13.0.
- Download the LineageOS zip(s). (see Downloads)
- Copy the LineageOS zip to internal sdcard.
- Unlock bootloader and install TWRP.
- Boot into TWRP.
- Perform a backup of your current ROM. (Optional)
- IMPORTANT: Do a Factory Reset. (Wipe data & cache)
- Flash LineageOS.
- Optional: Install the Google Apps addon package. (see Downloads)
* * * MODERATOR WARNING: users who violate FORUM RULES in this thread will have their account restricted or disabled without further warning! Please follow Forum Rules when posting * * *
- Reboot
DOWNLOADS
LineageOS:
https://download.lineageos.org/ham
Google Apps:
OpenGApps (recommended: arm, 7.1.1, nano)
SOURCECODE
Device tree: https://github.com/LineageOS/android_device_zuk_ham
Kernel: https://github.com/LineageOS/android_kernel_cyanogen_msm8974
HOW TO CONTRIBUTE
Use our code review system to send patches: https://review.lineageos.org
HOW TO BUILD
- repo init -u ssh://[email protected]/LineageOS/android.git -b cm-14.1
- add local manifest to .repo/local_manifests/
- repo sync -j4
- . build/envsetup.sh
- brunch ham
Local manifest:
Code:
<?xml version="1.0" encoding="UTF-8"?>
<manifest>
<project name="LineageOS/android_device_qcom_common" path="device/qcom/common" remote="github" />
<project name="LineageOS/android_device_zuk_ham" path="device/zuk/ham" remote="github" />
<project name="LineageOS/android_kernel_cyanogen_msm8974" path="kernel/cyanogen/msm8974" remote="github" />
</manifest>
SUPPORT ME
Do you like my work? Consider donating me some beer!
​
XDA:DevDB Information
LineageOS for Ham, ROM for the Lenovo Zuk Z1
Contributors
ashwin007
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
Version Information
Status: Testing
Created 2017-03-07
Last Updated 2017-03-07

Thanks man for your work and also for bringing Official Los 14.1 for this device:victory:

Good job.

Already installed.
Thanks a lot..
Sent from my ZUK Z1 using Tapatalk

needs a fresh install. will not install over unofficial Lineage.

Thanks man!
Inviato dal mio ZUK Z1 utilizzando Tapatalk

Do I need to install CM 13 or would a clean flash over unofficial CM 14.1 work?

Really great to see official LineageOS for ham :good:

ddishu2 said:
Do I need to install CM 13 or would a clean flash over unofficial CM 14.1 work?
Click to expand...
Click to collapse
Clean flash over CM14.1 unofficial.

Finally!! Thanks a lot.

Great. Thanks a lot. Can I try a dirty install over unofficial Lineage 30.1.17?

Thanks a lot.
bug:
ipv6 usb tethering not working.
it possible to add ipv6 USB tethering in this ROM ??
any unofficial patch available?

Thank you @ashwin007 ! Great job, everything is perfect here.
One question, can we make FINGERPRINT UNLOCK without pressing the button? To be able to use touch home button without pressing it.
It was possible on the unofficial rom and as well on official LOS14.1 for Mi5 it's working perfectly.
If it's not possible can you provide separated fix?
Thank you!

At last. Thanks for great job. LOS 14.1.1.

I am getting some error while flashing this ROM.. please check out my screenshot and guide me.

tanmeshn said:
I am getting some error while flashing this ROM.. please check out my screenshot and guide me.
Click to expand...
Click to collapse
Mate you sure you're not directly coming from COS? If you are, you might want to flash MM Firmware first and then try flashing the zip.
This error usually occurs when the present firmware isn't up to date.

I am facing very slow charging rate..

Shivver said:
Thank you @ashwin007 ! Great job, everything is perfect here.
One question, can we make FINGERPRINT UNLOCK without pressing the button? To be able to use touch home button without pressing it.
It was possible on the unofficial rom and as well on official LOS14.1 for Mi5 it's working perfectly.
If it's not possible can you provide separated fix?
Thank you!
Click to expand...
Click to collapse
it doesn't need to press. Just touch.
---------- Post added at 06:27 AM ---------- Previous post was at 06:24 AM ----------
sahu.prashant said:
Mate you sure you're not directly coming from COS? If you are, you might want to flash MM Firmware first and then try flashing the zip.
This error usually occurs when the present firmware isn't up to date.
Click to expand...
Click to collapse
here too. i flashed it after wipe /system /data /cache
so i disabled check zip...

sahu.prashant said:
Mate you sure you're not directly coming from COS? If you are, you might want to flash MM Firmware first and then try flashing the zip.
This error usually occurs when the present firmware isn't up to date.
Click to expand...
Click to collapse
Mate I tried many Roms.. and currently I am using CM13 latest and last official nightly ... Don't know why I am getting that error.

tanmeshn said:
Mate I tried many Roms.. and currently I am using CM13 latest and last official nightly ... Don't know why I am getting that error.
Click to expand...
Click to collapse
Now that's funny.... :silly:
Like @magnet1215 suggested you can try disabling check zip signature in TWRP settings.
If that doesn't work either, I'm sorry I'm outta ideas then.

[ROM][6.0.1][AOSP][UNOFFICIAL] Slim6

Slim6 for Huawei Nova CAN-L11​
DISCLAIMER:
Code:
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed.
* Please do some research if you have any concerns about features included
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
NOTES - MUST READ
1. All credits goes to @Grarak for making the sources. The kernel, device and vendor sources are using Grarak's sources as base + the changes i've did. Also I've been able to build by using Google Cloud platform since my PC is crap... It took me 1h 30m to build with Google Cloud platform, while with my PC was still building after 7h of building and then got an error regarding my PC (was too slow or out of memory).
2. You dont have to flash root because it is included.
3. Don't use encryption. I don't know why, but Grarak mentioned this on his twitter at the last build for CAN-L01.
4. ROOT is included. Enable it from Settings > Developer Options > Root access.
5. The DPI is set smaller by default. However, you can change that in Settings > Display.
6. SlimRom team has abandoned the development of MM version, so there wont be any other release unless there are fixes / improvements to the sources.
7. Few screenshots are attached at the end of this post.
Click to expand...
Click to collapse
SlimRoms is a custom android operating system. Our main goal is to offer users a slimmed down yet feature rich alternative to other android operating systems.
The entire SlimTeam work together to bring you this tailor-made beauty straight from Android Open Source Project (AOSP) source code.
All of the sources can be publicly viewed through GitHub and you can stop by our public Gerrit to submit patches of any type.
Slim6 is the project name for SlimRoms based on Android 6.0.1 Marshmallow and offers the following original features:
Slim Navbar & Hardware key rebinding
​Single tap action,​​ ​long press action, double tap action!-We’ve got you covered.
Slim Actions & Chamber of secrets
​Customise your device to the fullest​​ ​-You’re a wizard!
SlimRecents
A Faster alternative to stock recents ​-Your device, your choice.
SlimLauncher
​An​ ​Open​ ​source,​ ​feature​ ​filled​ ​launcher!​​ ​-Make yourself at home
Status bar customisations
​Clock and Date? Battery? ​-More​ ​fun​ ​than​ ​you​ ​can​ ​shake​ ​a​ ​stick​ ​at.
Requirements
- Huawei Nova CAN-L11
- EMUI 4.1 (Android 6.0). I've flashed it successfully from EMUI 5 ( Android 7.0) too and I didn't encounter any problems.
- Unlocked bootloader ( here's a guide about how to unlock it)
- TWRP by @Grarak. I don't know if it works with the other TWRP.
Click to expand...
Click to collapse
Installation
Make sure you meet the requirements listed above.
1. Download the ROM and put it on sdcard. If you want GAPPS too, then download Open Gapps too (choose arm64, 6.0 and pico).
2. Reboot in TWRP by pressing all 3 buttons (Volume UP + Volume Down + Power).
3. Wipe system, data, cache and dalvik-cache.
4. Flash the ROM from the directory where you've placed it.
5. Flash GAPPS (OPTIONALLY).
6. Reboot.
Click to expand...
Click to collapse
Download
ANDROIDFILEHOST | MEDIAFIRE
Sources
Device https://github.com/skinzor/android_device_huawei_can/tree/slim6
Vendor: https://github.com/skinzor/proprietary_vendor_huawei/tree/cm13.0
Kernel: https://github.com/skinzor/android_kernel_huawei_msm8953/tree/cm13.0
Click to expand...
Click to collapse
Credits
@Grarak for the sources
@AlaskaLinuxUser for being such a great guy. He not only share his experience and knowledge on his blog, but he also helped me when i have built Slim6 for my previous phone.
@FrozenCow
@franciscofranco
@flar2
@Sultanxda
@ Google for their cloud platform and free trial
@ LineageOS
@ Huawei
XDA:DevDB Information
[ROM][6.0.1][AOSP][UNOFFICIAL] Slim6, ROM for the Huawei Nova/Nova Plus
Contributors
#Henkate, Grarak
Source Code: https://github.com/skinzor/android_kernel_huawei_msm8953/tree/cm13.0
ROM OS Version: 6.0.x Marshmallow
Based On: AOSP
Version Information
Status: Stable
Stable Release Date: 2017-09-16
Created 2017-09-16
Last Updated 2017-09-16

Bugs / Changelog
Bugs
- offline charging / offline charging animation : it seems to show ??/100. Probably i'm missing something. It will be fixed in next build. Offline charging means when phone is charging, but it is turned off.
Same as LOS:
- FM-Radio (at this moment the app isn't even included)
- signal icon becomes empty / gray when you are using 3G, but the network is working
- camera recording / video playback issues (sometimes, when you play the recorded video it gets stuck / frozen)
- camera doesn't work for some people, while for me and others works
If you've found a bug, please report it along with a logcat.
Changelog
16.09.2017
- initial build
Click to expand...
Click to collapse

Some info
I've made following changes to Slim6:
- added microG support
- fixed drag-n-drop for SlimLauncher (paged drawer style). @YAJATapps from github is the one who shared the fix. This bug was left by the team of Slim ROM since the development of Slim6 has stopped.
Click to expand...
Click to collapse
I don't think that i will do other changes (such Substratum or something else) because this rom is meant to be slim, you know..
The following changes were done few days ago and will be available in next build of LOS too, but i won't make a new LOS build just for those changes:
- allow emergency numbers in call log
- enabled extended font support
- enabled TARGET_BOOTANIMATION_HALF_RES to speed up boot: more details here
- init.qcom.usb.rc: removed HiSuite
- unlocked 2160p for YouTube: found this here and the XDA article is here. Test it with this video. If you can't see 2160p resolution, then try to clear data and cache at Youtube app and then reboot. Note that i didn't notice any difference at all, but the XDA article says that there are improvements. If you encounter problems with that resolution (such lags or something), then just don't use it.
Click to expand...
Click to collapse

HI...Just to say ive successfully flashed it on Nova-Plus Mla-l03 with suggested GAPPS...
Followed all instructions and went great
Only thing was,like all other roms,i have while phone on,remove then re-put the SIM card cuz it was not detected...but works perfectly after

Great work Henkate!

[ROM][CM14.1][UNOFFICIAL] LineageOS 14.1 for Galaxy S7 Edge (hero2lte)

// Disclaimer
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
// Info
It's unnoficial LineageOS14.1 for Galaxy S7 Edge (hero2lte)
I strongly recommend to perform a backup of your current rom before installation.
LineageOS 14.1 has been closed https://www.lineageoslog.com/build/scheduler
I will continue to give support
Currently LineageOS 14.1 for Galaxy S7 is receiving only minor changes (mostly security fixes).
Regarding going from unofficial builds to official - or official to unofficial builds that can be done by as described here:
https://wiki.lineageos.org/signing_builds.html#test-keys-to-official-or-vice-versa
To migrate from unofficial build to official - or official to unofficial builds:
1. download this script
2. ensure that file has LF (UNIX-style) line endings
3. put it on your phone
4. reboot into recovery
5. make a full backup!
6. go to the folder where script is located
7. run: ./migrate.sh official
8. WARNING! rebooting phone now would end in data corruption!
9. flash the official build now (after flashing official build it is safe to reboot)
10. flash Gapps (and any addons)
11. reboot
you can also stay with my build, will continue to give support
What’s working
Audio
Bootanimation
Brightness
Bluetooth
Camera
Microphone
Fingerprint reader
NFC
Wi-Fi ( do not enable root, otherwise WiFi-Direct does not work)
LED
RIL (calls, sms, microphone, data)
All sensors
GPS
SD Card
- make a full Backup from your device
- Full wipe device (system, data, cache, dalvik)
- Install your Build
- Install Gapps
- Wipe Cache and Art/Dalvik
- Reboot
- Wait for 1st boot
- Enjoy
Update can be downloaded to your mobile phone via lineageos_updates and
if it is not possible to install the update automatically.
(Select in twrp) install/select Storage/internal storage/superordinate folder/data/lineageos_updates.
OTA
https://www.los-legacy.de/14.1/hero2lte
update: Monthly
Telegram Chat for hero2lte and herolte
if ota is not available you can download from here
https://androidfilehost.com/?w=files&flid=272450
Download gapps ama64
https://opengapps.org/​
// Donate Us
PayPal.Me
// Source Code
https://github.com/LineageOS
https://github.com/Exodusnick
// Partners & Friends for German
https://www.los-legacy.de/partners/for German
https://android-freaks.de/forum/thread/46-rom-unofficial-samsung-s7-herolte-hero2lte-lineageos-14-1/
XDA:DevDB Information
[ROM][CM14.1][UNOFFICIAL] LineageOS 14.1 for Galaxy S7 Edge (hero2lte), ROM for the Samsung Galaxy S7 Edge
Contributors
Exodusnick
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 4.x
Based On: LineageOS
Version Information
Status: Stable
Created 2018-06-01
Last Updated 2020-11-06

Reserved

the next build will come today

see OP
Changelog 01.06.2018

you can now update over ota

Is this rom by any chance only for G935F users? I have a G935S and I still get the "Error 7" despite cleanly installing and using the method to fix it.
Even though most roms on this forum work fine, other than this one.

@sambow23
TARGET_OTA_ASSERT_DEVICE := heroltebmc,herolteskt,heroltektt,heroltelgt,heroltexx,herolte
TARGET_OTA_ASSERT_DEVICE := hero2ltebmc,hero2lteskt,hero2ltektt,hero2ltelgt,hero2ltexx,hero2lte
is your device listed ?

Exodusnick said:
@sambow23
TARGET_OTA_ASSERT_DEVICE := heroltebmc,herolteskt,heroltektt,heroltelgt,heroltexx,herolte
TARGET_OTA_ASSERT_DEVICE := hero2ltebmc,hero2lteskt,hero2ltektt,hero2ltelgt,hero2ltexx,hero2lte
is your device listed ?
Click to expand...
Click to collapse
I don't think so.

Info from Dylan:
Ivan is already maintainer for both flat and edge 15.1
He just can't put his builds official until GPS is fixed
Idk when that will be though
For now people need your 14.1 builds I think too .
Thanks for the info Dylan

question: are there problems with my build ?

Working fine for me ???
Fast & reliable ?
Well done, thank you.

Exodusnick said:
question: are there problems with my build ?
Click to expand...
Click to collapse
none at all...
running 3days with microG
build is stable
everything works as listed...

only one question: how is camera's quality?

Everything seems to be good so far.
Only installed the rom last night though.
Battery life seems good.
No crashes or FC

GregoryHouse15 said:
only one question: how is camera's quality?
Click to expand...
Click to collapse
I haven't had a problem. It's fast and good quality. ?

Telegram Chat for hero2lte and herolte

test build Upload to OTA server

test build out now for S7 Edge via OTA
https://www.los-legacy.de/hero2lte after

there's just one thing missing wifi direct and display casting don't work

build 12.06.2018 via Ota
Changelog
Upload to OTA server in 50min.
Create MD5 checksum file
Transfer Rome to database
URL:https://www.los-legacy.de/hero2lte
Filename: lineage-14.1-20180612-UNOFFICIAL-hero2lte.zip
Device: hero2lte
Storage Directory:/data/lineageos_updates
patch_level 2018-06-05
OS Version: 14.1
2018-06-12 03:07:47
Romtype: unofficial
MD5SUM: 57c54870da19bfcfa99c407cadacc7f7
SIZE: 490270547