Related
You can help to find a ROM upgrade for HTC P3600 (Trinity) in Spanish language? better i-mate and qtek.
Thank you very much.
... to see if they remember us, spain is diferent
un saludo
hello, coleguitas. I´m waiting too...
Many of us are waiting, but I'm afraid there's no way.
WWE versions are, normally, better and better supported than other languages ones, so it is sensible to move to WWE.
Saludos, colegas.
Hello!
I installed the english ROM and yerterday I realized that in the keyboard there isn´t letter "Ñ". Is there any way to have this letter?
Thx
Ranob
ranob said:
Hello!
I installed the english ROM and yerterday I realized that in the keyboard there isn´t letter "Ñ". Is there any way to have this letter?
Thx
Ranob
Click to expand...
Click to collapse
It's available via "block recognizer" typping mode...
install "resco keyboard"... it have this character.
cetrespeo said:
It's available via "block recognizer" typping mode...
Click to expand...
Click to collapse
I can´t find that option. Where is it?
por ej:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
But with the letter recognizer, ¿is it possible?
Thx again
Soy de la opinion de que en este foro tendriamos que crear un hilo para nuestras Trinity con ROM en Español.
Saludos
Y yo, pero el problema es que mi ROM ya no está en español jeje
yo tb me apunto al post, ademas aporto la idea de traducir la rom en ingles al español, yo tengo la rom ya cambiada por lo del gps en ingles, y en mis intentos de ponerla en español intente esto:
http://foro.todopocketpc.com/showthread.php?t=130759&highlight=traducir
me lo traduce absolutamente todo, el único problema que tiene es que no funciona el configurador de wifi pero si funciona el wifi, y tampoco funcionan los iconos en la configuracion de la energia y la memoria, y el icono del usb a pc, por lo demas, que hubiese probado todo bien, serie interesante adaptar esa traduccion a la htc 3600 pero yo no se hacerlo, si conoces de alguien que sepa hacerlo o que me pueda orientar lo intentaria, y asi podriamos tenerla traducida al español, ya que merece tener la rom con el gps integrado, un saludo
yo tambien lo intenté jajaja algo habrá que hacer
Soy el primero en sentirme orgulloso de mi lengua y mi cultura pero no puedo apoyar la idea de generar un "hilo español" dentro del foro XDA. Es un foro en inglés y debemos respetar las reglas. Hay gente de todo el mundo poniendo sus contribuciones en inglés aunque no sean sus lenguas nativas.
-----------------------------------------------------------------------
I am the first being proud of my language and my culture but, certainly, I cannot fully support the idea of generating a 'Spanish thread' within the XDA forum. This is an English-speaking forum and we must adhere to the rules. People from allover the world are putting their contributions in English even not being their mother tongues.
With respect to the thread on the Spanish version of Windows mobile, I do support the idea, even when it is my intention to move into the LVSW English version, which makes me feel is the best option even unsigned.
In particular, in my current version, I am experiencing problems with bluetooth, shared connection (conexión compartida) and wifi connection:
Bluetooth does not work properly when exchanging files with Nokia phones. It does Trinity to Nokia but does not the other way.
Shared Connection always 'hangs down' after pressing connect when my Trinity is properly linked to the PC. I will try in a different PC other than my office one.
Wifi does properly work but the application 'Wireless LAN' (LAN inalámbrica) does not. It does not show proper information.
Also, I have problems with the duplication of the equivalent to the 'Storage Card' directory, named 'Tarjeta de almacenamiento'. It prevents me the proper use of the mini SD storage card for installing applications.
And finally, the one that concerns me more. I use Bluefire VPN client to connect to my company. When used over a 3G connection (Movistar), there is no problem at all. When used over Telefónica ADSL at home there is no possibility to connect. The tunnel is correctly open, but there is no data exchange. For that purpose I use as a side help ID Dashboard (which I recommend you by the way to keep track of all your connections). There is something I do not understand because I can access my company over the same IDSL using Nortel Networks Contivity VPN client.
With respect to the GPS, I am not in a hurry to have it because I own a cheap Mio P350.
Finally, a pair of recommendations upon my experience:
- Spb Backup
- Resco File Explorer
- Resco Registry
- and Styletap Platform for those of you moving from Palm. That's a great emulator.
Thanks to you all.
Me parece fenomenal lo que dices, pero desgraciadamente no se Ingles y por eso he comentado lo de tener un hilo en nuestra lengua.
Saludos
I fully see your point but it is my understanding that the proper place for a Spanish thread is a Spanish forum. First of all please accept my apologies but that's my view.
Anyway I will translate my previous message as a deference to you.
Te entiendo perfectamente pero creo que el lugar adecuado para un hilo en español es un foro español. Mis disculpas de antemano, pero es lo que pienso. Te traduzco mi mensaje anterior.
Con respecto al hilo sobre la versión española de Windows mobile, apoyo la idea incluso aunque mi intención es pasar a la versión inglesa de LVSW, que me parece la mejor opción aunque no esté firmada.
En concreto, con mi versión actual (española) tengo problemas con bluetooth, conexión compartida y wifi:
El bluetooth no funciona bien cuando se intercambian ficheros con móviles Nokia. Lo hace en el sentido Trini -> Nokia pero no al revés.
La conexión compartida se me cuelga al pulsar "conectar" con la Trini conectada la PC. Probaré con otro PC distinto al que tengo en la oficina.
WiFi funciona bien pero la aplicación LAN inalámbrica no. No muestra información correcta.
También tengo problemas con la duplicación del directorio 'Tarjeta de almacenamiento'. Me impide usar la mini SD para instalar aplicaciones.
Y, por último, lo que más me preocupa. Uso un cliente Bluefire VPN para conectarme a mi trabajo. Cuando lo uso sobre 3G Movistar no hay problema. Cuando lo uso sobre ADSL de Telefónica en mi casa, no funciona. Se abre correctamente el túnel pero no hay intercambio de datos. Para ese fin uso como ayuda auxlilar el software ID Dashboard (que recomiendo para ver el estado de las comunicaciones). Hay algo que no entiendo porque puedo acceder a mi empresa con el mismo ADSL utilizando un cliente Nortel Networks Contivity VPN client en el PC
Con respecto al GPS, no tengo prisa porque tengo una Mio P350 barata (199€ en Media Markt y Saturn).
Por último unas recomendaciones según mi experiencia:
- Spb Backup
- Resco File Explorer
- Resco Registry
- y Styletap Platform para los que vengan del mundo Palm. Es un emulador muy bueno.
we can create some post in another forum of PPC and take it parallel to this, evolutions, etc
-------------
podemos crear algun post en otro foro de PPC y llevarlo paralelo a este,evoluciones, etc
I suggest this one:
Sugiero éste:
http://foro.todopocketpc.com/showthread.php?t=133793&page=5&highlight=htc+p3600+gps
it does not seem to me bad, we will not have problems at the time of speaking on some subjects? downloads, not if I explain myself ...
-----------------------------
no me parece mal , ¿no tendremos problemas a la hora de hablar sobre algunos asuntos? descargas .. no se si me explico...
Hello this is my first post and I'm desperedo! Today ICS install a ROM http://forum.xda-developers.com/showthread.php?t=1362092
I had the Factory ROM 2.2.1 and had no problems when installing the ICS, then I realized that HD games and thought I shut him a backup but this failed, I gave up and as I was in a ClockWordMod format (wipe) after the phone reboots, the phone is on the screen I have AT&T and I can not access the download mode, and only took 1 week for me to buy it from Amazon.com and I'm crying. Looking on Youtube I found a video of what is happening to me http://www.youtube.com/watch?v=betzMPoTD68
PS: My phone came with a factory default, the button off and on always gets stuck and just what I put the battery is turned on at once. Someone please help me to solve this Bootloop.
This text was translated with Google Translate
---------------------------
Hola este es mi primer post y ando desperedo!! Hoy instale una ROM ICS http://forum.xda-developers.com/showthread.php?t=1362092
Yo tenia la ROM de Fabrica 2.2.1 y no tenia problemas cuando instale la ICS, despues me di cuenta que los juegos HD se me cerraban y pense hacerle un Backup pero este fallaba, me di por vencido y como estaba en el ClockWordMod hice un formateo (wipe) despues reincie el telefono, el telefono se me queda en la pantalla de AT&T y no puedo acceder al modo descarga, y apenas llevo 1 semana de que me lo compre por Amazon.com y estoy llorando. Buscando en Youtube me encontré con un video de lo que me está pasando http://www.youtube.com/watch?v=betzMPoTD68
PD: Mi telefono vino con un defecto de fabrica, el boton de apagar y prender se queda siempre pegado y apenas a lo que le pongo la bateria este prende de una vez. Alguien que me ayude porfavor para solucionar este Bootloop.
Este texto fue traducido con el Traductor de google
ManuelZRO said:
Hello this is my first post and I'm desperedo! Today ICS install a ROM http://forum.xda-developers.com/showthread.php?t=1362092
I had the Factory ROM 2.2.1 and had no problems when installing the ICS, then I realized that HD games and thought I shut him a backup but this failed, I gave up and as I was in a ClockWordMod format (wipe) after the phone reboots, the phone is on the screen I have AT&T and I can not access the download mode, and only took 1 week for me to buy it from Amazon.com and I'm crying. Looking on Youtube I found a video of what is happening to me http://www.youtube.com/watch?v=betzMPoTD68
PS: My phone came with a factory default, the button off and on always gets stuck and just what I put the battery is turned on at once. Someone please help me to solve this Bootloop.
This text was translated with Google Translate
---------------------------
Hola este es mi primer post y ando desperedo!! Hoy instale una ROM ICS http://forum.xda-developers.com/showthread.php?t=1362092
Yo tenia la ROM de Fabrica 2.2.1 y no tenia problemas cuando instale la ICS, despues me di cuenta que los juegos HD se me cerraban y pense hacerle un Backup pero este fallaba, me di por vencido y como estaba en el ClockWordMod hice un formateo (wipe) despues reincie el telefono, el telefono se me queda en la pantalla de AT&T y no puedo acceder al modo descarga, y apenas llevo 1 semana de que me lo compre por Amazon.com y estoy llorando. Buscando en Youtube me encontré con un video de lo que me está pasando http://www.youtube.com/watch?v=betzMPoTD68
PD: Mi telefono vino con un defecto de fabrica, el boton de apagar y prender se queda siempre pegado y apenas a lo que le pongo la bateria este prende de una vez. Alguien que me ayude porfavor para solucionar este Bootloop.
Este texto fue traducido con el Traductor de google
Click to expand...
Click to collapse
Disconnect your phone from your computer if it's connected and take out the battery. Hold the volume up and down keys, connect your phone to your computer while doing this, and then insert your battery while still holding down volume up and down. This might get you into download mode.
help
1.Disconnect your phone from your computer if it's connected
2.take out the battery
3.Hold the volume up and down keys, connect your phone to your computer while doing this
4.then insert your battery while still holding down volume up and down. This might get you into download mode.
te estoy ttraduciendo lo que puso el miembro sthodupunuri en la descripcion
1.descocecta el telefono de la computadora (si se encuentra conectado)y quita la batteria.
2.presiona los botones del volume arriva-abajo al mismo tiempo(no los sueltes)
3.conecta el usb cable y insierta la bateria eso te pondra en download mode
mucha suerte si nesecitas mas ayuda reply a este mensage
chicanowpride said:
te estoy ttraduciendo lo que puso el miembro sthodupunuri en la descripcion
1.descocecta el telefono de la computadora (si se encuentra conectado)y quita la batteria.
2.presiona los botones del volume arriva-abajo al mismo tiempo(no los sueltes)
3.conecta el usb cable y insierta la bateria eso te pondra en download mode
mucha suerte si nesecitas mas ayuda reply a este mensage
Click to expand...
Click to collapse
Per forum rules please translate this to english and post in your original post alongside the spanish version.
Nothing happened, so no access to the download, it's the same as in the video where you try to access the recovery mode, but this one is like the circle loading and off the screen and turns on again. I'm thinking the USB JIG solution but I have the problem that the phone is turned on you just put the battery and I doubt that I may have the USB method JIG
This text was translated with GoogleTranslate
----------------------------------------------------------------------
No ha pasado nada, no accede al modo descarga, pasa lo mismo como en el video en donde se intenta acceder al modo recovery, pero este se queda como el circulo cargando y se apaga la pantalla y se prende otra vez. Ando pensando en la solucion del USB JIG pero tengo el problema de que el telefono se prende apenas le pongo la bateria y dudo que me sirva el metodo del USB JIG
ManuelZRO said:
Nothing happened, so no access to the download, it's the same as in the video where you try to access the recovery mode, but this one is like the circle loading and off the screen and turns on again. I'm thinking the USB JIG solution but I have the problem that the phone is turned on you just put the battery and I doubt that I may have the USB method JIG
This text was translated with GoogleTranslate
----------------------------------------------------------------------
No ha pasado nada, no accede al modo descarga, pasa lo mismo como en el video en donde se intenta acceder al modo recovery, pero este se queda como el circulo cargando y se apaga la pantalla y se prende otra vez. Ando pensando en la solucion del USB JIG pero tengo el problema de que el telefono se prende apenas le pongo la bateria y dudo que me sirva el metodo del USB JIG
Click to expand...
Click to collapse
Can you try getting into recovery mode? Take the battery out, hold down volume up and volume down buttons. Then put the battery in while still holding the buttons down. Keep holding the buttons until the phone boots into recovery. From there, install a gingerbread rom. An ICS rom will not install with froyo bootloaders.
http://forum.xda-developers.com/show....php?t=1530886
My phone is in a bootload yesterday and found a method, which is with the ADB and Android SDK, I followed a guide I found in Spanish in HTCMania and also a video on YouTube in English, here are the video: http://www.youtube.com/watch?v=oaNM-...layer_embedded
I followed all the steps but at the time to put "adb reboot recovery" tells me "device not found"
IMAGE:
http://img849.imageshack.us/img849/3182/dibujorhx.png
We thank some kind of help please, here is a video that i found in Youtube that shows exactly what is happening to me http://www.youtube.com/watch?v=betzMPoTD68
PD: My phone when you buy it, came with a manufacturing defect, the power button on / off is stuck inside and when the battery put the phone on immediately, as a result of this I can not use the USB method JIG.
This text was translated with GoogleTranslate
-----------------------------------------------------
No puedo entrar al modo recovery ni nada he intentado lo que han dicho y nada.
Investigando en internet consegui un metodo para iniciar el recovery con ADB. Segui los pasos de esta guia
Pero en el momento de poner adb reboot recovery, dice: device not found, intenté instalar los drivers USB otra vez pero no sucede nada no me reconoce el telefono. ¿No sera por la ROM ICS que no me quiere reconocer el telefono?[/QUOTE]
-----------------------------------------------------
No puedo entrar al modo recovery ni nada he intentado lo que han dicho y nada.
Investigando en internet consegui un metodo para iniciar el recovery con ADB. Segui los pasos de esta guia
Pero en el momento de poner adb reboot recovery, dice: device not found, intenté instalar los drivers USB otra vez pero no sucede nada no me reconoce el telefono. ¿No sera por la ROM ICS que no me quiere reconocer el telefono?
ManuelZRO said:
I send a private message with full message links do not let me post
I can not enter recovery mode and nothing I tried what you said and nothing.
Researching on the internet I got a method to start the recovery with ADB.
But just to put adb reboot recovery, says: device not found, I tried to install the USB drivers again but nothing happens I do not recognize the phone. Do not be the ICS ROM that I want to recognize the phone?
Click to expand...
Click to collapse
Did you try the 2 button combo? volume up + power button? also did you try changing your drivers from the captivate drivers to say the Galaxy Nexus drivers or the Google drivers? I know that fixed mine a while back
http://forum.xda-developers.com/showthread.php?t=1530886
If I tried to enter the recovery and the download and nothing, as my phone has the button On / Off stuck inside, so when I connect the battery the phone is turned away, just makes me fata press volume buttons and connect the battery to see if it comes to recovery, but not entered, the phone lights up the screen at & t and then goes black screen and returns to the screen at & t and so on, I'm trying with the SDK Manager but I have not solve the problem, I read this guide HTCMania forum http://www.htcmania.com/showthread.php?t=337069, this same guide is also on Youtube http://www.youtube.com/watch?v=betzMPoTD68&feature=related
The problem is I do not recognize the device
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
By manuelzro at 2012-03-05
Reinstall the drivers, install the drivers of Google and nothing happens, even when I connect the phone to USB and the PC does not recognize me the phone, I do not chip or a notice, nothing, something like "device is detected" or a signal, nothing, I'm really desperate any help would be appreciated.
This text was translated with Google Translate
---------------------------------------------------------
Si, intenté entrar al recovery y el Download y nada, como mi telefono tiene el boton On/Off pegado por dentro, y por eso cuando conecto la bateria el telefono se enciende inmediatamente, solo me hace fata presionar los botones de volume y conectar la bateria para ver si entra al recovery, pero no entra, el telefono enciende con la pantalla de at&t y luego se pone la pantalla en negro y vuelve a la pantalla de at&t y asi sucesivamente, ahora estoy intentando con el SDK Manager pero no he conseguido solucionar el problema, lei esta guia en el foro de HTCMania http://www.htcmania.com/showthread.php?t=337069, esta misma guia esta en Youtube tambien http://www.youtube.com/watch?v=betzMPoTD68&feature=related
El problema es que no me reconoce el dispositivo
By manuelzro at 2012-03-05
Reinstale los drivers, instale los drivers de Google y no sucede nada, e incluso cuando conecto el telfono al USB y la PC no me reconoce el telefono, no me salta ni una notificacion, nada, algo asi "Se ha detectado un dispositivo" ni una señal, nada, ando desesperado cualquier ayuda seria realmente apreciada
Have you tried a different cable? Or maybe even another computer? I've read quite a few posts here on XDA that the Samsung USB cable doesn't work with some computers or the computer itself is the problem..
[edit]
I noticed you're using
C:\android-sdk>
try using C:\Users\Yourcompuernamehere (the name you used for your computer ) >
Start -> All Programs -> Accessories -> Command Prompt
It might be trying to find your phone via an emulator or something?
For now I have not tried connecting the phone to another computer, another will try tomorrow to see if at least recognizes the phone.
did u try the USB jig to force it in to Dwd mode ? or there is another method
http://www.youtube.com/watch?v=Rdn5GoRjhn0
bbut i am not sure it will work in ur captivate. I had some problems , but another friend had no issues in this.....
I mean, my phone has the button On / Off stuck, so I can not use the USB method JIG because the battery just put the phone on immediately, the solution would be to repair the button On / Off in my area but I doubt they have support Android, much less this phone is not sold in my country, in addition to the telephony market in my country is invaded by Blackberry (4 of 5 people have a Blackberry). The USB JIG MercadoLibre.com sell it on but I need repair first button on / off
This text was translated with Google Translate
I just tried another USB cable but the PC does not recognize me the phone yet, I'm hoping that me will bring a laptop to see if it recognizes the phone.
The translations are considered google translator? No great confidence in this translator
As I posted in your other thread, the only thing I can suggest is trying the Nexus S drivers since your phone cannot be recognized.
I have the exact same Issue! My power button it's stuck so every time I put the battery the phone power on by itself... But I know the cause of my issue... I had a bootloop so on CWM I formated /boot later I discover that "/boot" is for bootloader and no for the ROM. So I'm stuck as you!
I don't think the correct drivers will work, because you need to be on download mode for that. I CAN'T get there. ANY HELP!?
BTW: I speak spanish PM if you found a solution.
Have you tried holding the vol up + vol down buttons while plugging in the phone? Or even volume down + power button(you say its stuck so no need to press it) while plugging in the phone?
cOld1 said:
Have you tried holding the vol up + vol down buttons while plugging in the phone? Or even volume down + power button(you say its stuck so no need to press it) while plugging in the phone?
Click to expand...
Click to collapse
Yes I tried that... But I get stuck either on ATT Screen or in the "loading battery charge logo" << just the circle not the battery logo itself, and if I pressed UP and DOWN it get stuck on a bootloop. ATT screen >> Black screen >> Att screen ... etc.
ADB or the jig method? One of those 2 has to work..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Snow Flash Tool!
A tool to flash roms various ways, (fastbootd and super imgs only at the moment)
Requirements:
Windows 64bit
Android Phone with dynamic partitions
Notes: if you notice any bugs, freezes, unexpected problems. Report Back to me here or on telegram @SnowTalking
OR join my group for discussions and releases!!!
https://t.me/snowflashtooldiscussionhttps://t.me/snowflashtoolDisclaimer*** I am not responsible for anything that has happened to your device
Source: https://github.com/SnowTalking/Snow-Flash-Tool
Download: https://androidfilehost.com/?w=files&flid=325135
Reserved
hola tengo un moto g8 fast 2045-1 que no arranca muestra el logo de motorola y no se reinicia hata llegar a decir sobre las ranura a/b ya le creee un flash blank gracias a un tuto pasa el flash blank sin proble inicia el bootloader instalo el firmware pasa el firmware y hace lo mismo probe con muchicimas rom y hace lo mismo alguien me podria ayudar?
Adrianbene said:
hola tengo un moto g8 fast 2045-1 que no arranca muestra el logo de motorola y no se reinicia hata llegar a decir sobre las ranura a/b ya le creee un flash blank gracias a un tuto pasa el flash blank sin proble inicia el bootloader instalo el firmware pasa el firmware y hace lo mismo probe con muchicimas rom y hace lo mismo alguien me podria ayudar?
Click to expand...
Click to collapse
toda via necesitas ayuda con este problema?
Hello, I have already been trying to repair my moto g8 2045-1 for 5 months, as they say, the same thing happens to me, it only restarts until I say slots a/b no matter how many blank flashes I do, it happens, I install the firmware correctly, but it does the same thing, it only restarts and by the way, the imei and the name of the equipment no longer appear
hola si ya tengo 5 meses intentando reparar mi moto g8 2045-1 como dicen me pasa lo mismo solo se reinicia hasta decir de las ranuras a/b por mas blank flash que haga lo pasa instalo el firmware correctamente pero hace lo mismo solo se reinicia y por cierto ya no me aparece el imei ni el nombre del equipo
Ok que modo estás usando cuando haces el flash? Puedes entrar al recovery?
lo flasheo por bootloader osea ap fastboot y si puedo entrar al recovery y ingresar al modo fastbootd pero mi bootloader estas bloqueado
alguna respuesta alguien xfavor
Well what happens is that recently my moto g9 play was updated to the version of android 11 but it turns out that with the passage of a few days it began to present some failures and I started to read a bit and several users had similar problems, apparently my best option was to "downgrade" to android 10, look in some forums for some guides and supposedly everything was correct.
I was testing the installation of android 10 a bit and it seemed that the problems had been solved it was not until I restarted the phone and then "no valid operating system could be found. the device will not boot" then try to "repair using Rescue and Smart Assistant" but at 50 % just get error but after that the mobile just stuck on green android and under says "AP fastboot FLash mode (secure)"
PD- when i try to flash stock firmware fastboot commands just get me access denied something like this
writing 'partition'...
(bootloader) Validating 'gpt.default.xml'
(bootloader) flash permission denied
(bootloader) Cancelling 'gpt.default.xml'
FAILED (remote failure)
there is a possible solution? :S noob here a lot
EDIT: forget mention that i can't enter to SO to enable oem unlock
I'm in the same situation, I think we need to wait for someone to do a blank-flash. I can't log in either and it asks me to enable OEM Unlocking. If you or I find a solution we can communicate here.
Estoy igual no he encontrado una solución
Teyzen18 said:
Estoy igual no he encontrado una solución
Click to expand...
Click to collapse
I think I have seen something, it has been uploaded to lolinet recently, I don't know if it is useful for you.
I haven't tried it because I don't have tools to open my phone, but try it and maybe it will work for you.
https://mirrors.lolinet.com/firmware/moto/guamp/blankflash/blankflash_guamp_RPX31.Q2-58-16.zip
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TheRealDarkness said:
Creo que he visto algo, se ha subido a lolinet recientemente, no sé si es útil para ti.
No lo he probado porque no tengo herramientas para abrir mi teléfono, pero pruébalo y tal vez funcione para ti.
[URL unfurl = "true"] https://mirrors.lolinet.com/firmware/moto/guamp/blankflash/blankflash_guamp_RPX31.Q2-58-16.zip [/ UR
TheRealDarkness said:
Creo que he visto algo, se ha subido a lolinet recientemente, no sé si es útil para ti.
No lo he probado porque no tengo herramientas para abrir mi teléfono, pero pruébalo y tal vez funcione para ti.
[URL unfurl = "true"] https://mirrors.lolinet.com/firmware/moto/guamp/blankflash/blankflash_guamp_RPX31.Q2-58-16.zip [/ URL]
View attachment 5469381
Click to expand...
Click to collapse
Solo me sigue diciendo flash_locked cuando se reinicia en fastboot y me sigue denegando los permisos
Click to expand...
Click to collapse
TheRealDarkness said:
Creo que he visto algo, se ha subido a lolinet recientemente, no sé si es útil para ti.
No lo he probado porque no tengo herramientas para abrir mi teléfono, pero pruébalo y tal vez funcione para ti.
[URL unfurl = "true"] https://mirrors.lolinet.com/firmware/moto/guamp/blankflash/blankflash_guamp_RPX31.Q2-58-16.zip [/ URL]
Click to expand...
Click to collapse
TheRealDarkness said:
Creo que he visto algo, se ha subido a lolinet recientemente, no sé si es útil para ti.
No lo he probado porque no tengo herramientas para abrir mi teléfono, pero pruébalo y tal vez funcione para ti.
[URL unfurl = "true"] https://mirrors.lolinet.com/firmware/moto/guamp/blankflash/blankflash_guamp_RPX31.Q2-58-16.zip [/ URL]
View attachment 5469381
Click to expand...
Click to collapse
Crees que no se hacerlo??
Teyzen18 said:
Crees que no se hacerlo??
Click to expand...
Click to collapse
Oh, so you mean it won't even let you do that for blankflash itself?
TheRealDarkness said:
Oh, entonces ¿quieres decir que ni siquiera te dejará hacer eso para el flash en blanco?
Click to expand...
Click to collapse
no me quedan mas opciones?
Teyzen18 said:
no me quedan mas opciones?
Click to expand...
Click to collapse
As far as I can see, no, blankflash is the only way.
TheRealDarkness said:
Por lo que puedo ver, no, el flash en blanco es la única forma.
Click to expand...
Click to collapse
que es lo que deberiaa hacer el flash en blanco?, por que una ves lo ejecuto reinicia en fastboot pero sigue diciendo flashing_locked
Teyzen18 said:
que es lo que deberiaa hacer el flash en blanco?, por que una ves lo ejecuto reinicia en fastboot pero sigue diciendo flashing_locked
Click to expand...
Click to collapse
Actually, you must open the phone completely
After that, you will have to find the correct points which are called "test points" in order to enter EDL mode.
After that, it's basically putting the Windows in test mode.
With the 2 test points already found, you should press them with tweezers and on the PC, it should detect something that says "Qualcomm HS-USB QDLoader".
Now you just need to flash the blankflash.
Maybe, this video is good for you, it is for another model, but use the blankflash of your phone model:
TheRealDarkness said:
En realidad, debes abrir el teléfono por completo.
Después de eso, tendrá que encontrar los puntos correctos que se denominan "puntos de prueba" para ingresar al modo EDL.
Después de eso, básicamente está poniendo Windows en modo de prueba.
Con los 2 puntos de prueba ya encontrados, debe presionarlos con pinzas y en la PC, debe detectar algo que diga "Qualcomm HS-USB QDLoader".
Ahora solo necesita flashear el flash en blanco.
Tal vez, este video sea bueno para ti, es para otro modelo, pero usa el flash en blanco del modelo de tu teléfono:
[MEDIA = youtube] IBeQj5U9TRQ: 1003 [/ MEDIA
Click to expand...
Click to collapse
Ya lo intente no hace absolutamente nada además de reiniciarse en fastboot y no déjarme flashear firmware
Teyzen18 said:
Ya lo intente no hace absolutamente nada además de reiniciarse en fastboot y no déjarme flashear firmware
Click to expand...
Click to collapse
That sounds sad, I think there are no other alternatives around here, only call to Motorola....
Teyzen18 said:
Crees que no se hacerlo??
Click to expand...
Click to collapse
i need for moto g9
blankflash file.
Well helloo, i haved hard bricked my moto g9 play with a new custom rom and i don't know where are the EDL points in this cellphone, anyone have some idea? i touched a lot of places (Sorry if i have some bad english, im of argentina)
Well, I'll be a little brief. I was flashing a TWRP, the problem is that it wasn't the right one for my system. My phone ended up in a hard brick, although I can enter fastboot perfectly. I can't get into the system, and obviously I can't get into the recovery either. I'm kind of a newbie at this, I don't usually touch things so often on my phone, but if I do it's for experimenting and curiosity (following tutorials). The only thing I see on the internet is to use the EDL, the only problem I see here is that there is none, I don't know if it's the right thing to do. I am very lost...
I have permission denied to everything in fastboot, and I can't do anything. If anyone has a way how to solve it I appreciate it too much
This appears when I try to flash gpt.bin
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TheRealDarkness said:
Bueno, seré un poco breve. Estaba mostrando un TWRP, el problema es que no era el adecuado para mi sistema. Mi teléfono terminó en un ladrillo duro, aunque puedo ingresar a fastboot perfectamente. No puedo ingresar al sistema y, obviamente, tampoco puedo ingresar a la recuperación. Soy un poco novato en esto, no suelo tocar las cosas con tanta frecuencia en mi teléfono, pero si lo hago es por experimentar y por curiosidad (siguiendo los tutoriales). Lo único que veo en Internet es usar la EDL, el único problema que veo aquí es que no hay ninguna, no sé si es lo correcto. Estoy muy perdido ...
Tengo el permiso denegado para todo en fastboot y no puedo hacer nada. Si alguien tiene una forma de solucionarlo se lo agradezco demasiado
Esto aparece cuando intento flashear
TheRealDarkness said:
Bueno, seré un poco breve. Estaba mostrando un TWRP, el problema es que no era el adecuado para mi sistema. Mi teléfono terminó en un ladrillo duro, aunque puedo ingresar a fastboot perfectamente. No puedo ingresar al sistema y, obviamente, tampoco puedo ingresar a la recuperación. Soy un poco novato en esto, no suelo tocar las cosas con tanta frecuencia en mi teléfono, pero si lo hago es por experimentar y por curiosidad (siguiendo los tutoriales). Lo único que veo en Internet es usar la EDL, el único problema que veo aquí es que no hay ninguna, no sé si es lo correcto. Estoy muy perdido ...
Tengo el permiso denegado para todo en fastboot y no puedo hacer nada. Si alguien tiene una forma de solucionarlo se lo agradezco demasiado
Esto aparece cuando intento flashear gpt.bin
Click to expand...
Click to collapse
Deberas esperar un flash en blanco, estoy en la misma
Click to expand...
Click to collapse