Database Develop

Troubleshooting, touch screen not working in TWRP

Hi everyone, so some mistakes have been made today. While playing around with substratum theme engine on my mix running lineage-os 14.1, i had uninstalled one of the themes and then decided to uninstall the app entirely, however after uninstall it didnt reset the theme, so i rebooted. While attempting to reboot it got stuck in a boot loop. At this point I plugged my phone into my pc and booted into twrp so i could access my files and get them off, however when attempting to boot into twrp i could not use the touch screen which is preventing me from re-flashing my rom. and so after troubleshooting for an hour or soi had all my files off of my device, so i decided to format the system partition. so now i have no rom flashed and a twrp that i cannot use due to lack of touchscreen, its temporarily bricked i guess. So my questions are; A. can i use an otg cable and a mouse to control twrp? B. Is there some way to directly flash a rom from adb or from the connected pc. Then I should also state that I have tried older/newer versions of twrp to try to get the touchscreen working, to no avail (currently running 3.1.1-0 lithium). Ive read that it may be touchscreen drivers or something that are mis-matched from the rom. the onlyt issue is that there is no rom, also ive heard that the touchscreen is at a kernel level so i may need to flash a new kernel to get it working. TBH im not going to do anything else so that i dont completely brick my phone. Thank you all in advance for helping out!

Please try this (older) TWRP by MrRaines: https://www.androidfilehost.com/?fid=673368273298927160
It's TWRP 3.0.2-0 based but has different kernel/driver that is more compatible with a varous bunch of ROMs.

You're a god, this is exactly what I needed, thanks!!!

raupe said:
Please try this (older) TWRP by MrRaines: https://www.androidfilehost.com/?fid=673368273298927160
It's TWRP 3.0.2-0 based but has different kernel/driver that is more compatible with a varous bunch of ROMs.
Click to expand...
Click to collapse
I LOVE you, spent hours trying to get recovery working. This was the only fix!
Thank you so much brother.

kanej2006 said:
I LOVE you, spent hours trying to get recovery working. This was the only fix!
Thank you so much brother.
Click to expand...
Click to collapse
Ok glad to read that it works.
Please keep in mind: the TWRP of MrRaines is an older one and is heavily modified.
ATM i'm trying to investigate what's the specific reason other TWRP versions are conflicting with touchscreen drivers on every new release of an stable or dev rom but MrRaines TWRP is still working ^^
The TWRP compatibility case has become even worse with the release of some Android 7.x / Nougat based ROMs - without an official kernel source release for Android 7 by Xiaomi (Android 6 kernel sources should have been released some weeks ago).
Could take a couple of days to find a reason and some more to find a solution...
... any help, tips and confidential information is very welcome @MrRaines @jcadduono

raupe said:
Ok glad to read that it works.
Please keep in mind: the TWRP of MrRaines is an older one and is heavily modified.
ATM i'm trying to investigate what's the specific reason other TWRP versions are conflicting with touchscreen drivers on every new release of an stable or dev rom but MrRaines TWRP is still working ^^
The TWRP compatibility case has become even worse with the release of some Android 7.x / Nougat based ROMs - without an official kernel source release for Android 7 by Xiaomi (Android 6 kernel sources should have been released some weeks ago).
Could take a couple of days to find a reason and some more to find a solution...
... any help, tips and confidential information is very welcome @MrRaines @jcadduono
Click to expand...
Click to collapse
Just see the kernel img, ramdisk and boot files/blobs

raupe said:
Ok glad to read that it works.
Please keep in mind: the TWRP of MrRaines is an older one and is heavily modified.
ATM i'm trying to investigate what's the specific reason other TWRP versions are conflicting with touchscreen drivers on every new release of an stable or dev rom but MrRaines TWRP is still working ^^
The TWRP compatibility case has become even worse with the release of some Android 7.x / Nougat based ROMs - without an official kernel source release for Android 7 by Xiaomi (Android 6 kernel sources should have been released some weeks ago).
Could take a couple of days to find a reason and some more to find a solution...
... any help, tips and confidential information is very welcome @MrRaines @jcadduono
Click to expand...
Click to collapse
Hmmm. I did try two or even three other versions of TWRP. The first two would not even flash giving me an error. The third worked but touch screen would not work. Final attempt was the one from MrRaines which worked perfect!

[ROM] [T-713/T-813] [Unofficial/Weekly (14-08-18)] [8.1] Resurrection Remix OS

Resurrection Remix 6.1 for the Samsung Galaxy Tab S2 (T-713/T-813) (Latest build: 14-08-18)
by Orfik
This new thread is for Orfik's version of the Resurrection Remix ROM. It is updated and maintained weekly by him.
He is compiling this ROM for his own enjoyment but decided to share this with the community. He is not responsible if your tablet bricks, your SD card spontaniously combust or if you did not research enough to know better because you decided to mod your device while being in the dark about it.
You warranty will be void!. Don't say we didn't warn you.
To know more about Resurrection Remix OS: Website
For those who want to check the source code, link to their github: Github
Rom is based on Kernel and device tree from here: LineageOS 15.1 for T-713
Installation instructions:
Important: Make sure that your bootloader is updated to version T713XXU2BQCO (or newer) or this will not work.
1) Download latest build
2) Dowload Gapps (Arm64/8.1)
3) Make a nandroid backup!
4) Wipe Data/System/Cache/Dalvik Cache
5) Flash RR OS with TWRP (TWRP 3.2.1.0 by Luk1337)
(TWRP 3.2.1.0 for T-813)
6) Flash Gapps
7) Reboot. (The first reboot can take a while... be patient! (might take up to 15 mins)
8) Have fun!
Downloads
RR OS Builds for T-713 (6.1)
RR OS Build for T-813 (6.1)
Google Apps packages
GApps for Oreo 8.1
--------------------------------------------------------------------​
Big thanks to:
Orfik (for building this ROM)
LineageOS team
Omni Team
SlimRom team
and everyone who makes Resurrection Remix OS possible​
Created: 2017-08-19
Updated: 2018-08-15

Reserved for future use.

Wonderful, I received and rooted my tablet this WE and saw your release.
Installation is OK, no problem.

All works fine!

where can i download the T813 version ? gts210vewifi ?
thank you !

Magisk issue
Managed to successfully install this latest RR ROM version, things seem to run fine so far. Had to uninstall the previous 7.1.1 ROM version due to non functional fingerprint sensor, but things are running fine now. There was a temporary issue with Magisk not installed at the start, but installed the latest 13.3 version through TRWP 3.1.1-1 and is perfect now.
Thank you

chylxf said:
where can i download the T813 version ? gts210vewifi ?
thank you !
Click to expand...
Click to collapse
I do not think that Orfik compiled one for the T-813. I can check If you want.

chylxf said:
where can i download the T813 version ? gts210vewifi ?
thank you !
Click to expand...
Click to collapse
https://drive.google.com/drive/folders/0B29uGxvwvihDY0hBNkE2UlM0MzA?usp=sharing
You can test this build. But I don't have T813, so try at your own risk

orfik said:
https://drive.google.com/drive/folders/0B29uGxvwvihDY0hBNkE2UlM0MzA?usp=sharing
You can test this build. But I don't have T813, so try at your own risk
Click to expand...
Click to collapse
I just downloaded it. Flashing and tell you

I just dirty flashed update T713 from today! Good job, works perfectly.

Just flashed on T813. Works well and dirty flashed from other ROM. the only issue I had was that I was receiving a 'android-process-acore-has-stopped' error. I had to restore my contacts and contacts storage from titanium to fix. The updated twrp works better except you still can't back up when you have the encryption set up
Sent from my SM-T813 using XDA-Developers Legacy app

_nKo_ said:
I just downloaded it. Flashing and tell you
Click to expand...
Click to collapse
After 2 days using on T813, all is working nice. No issue after a clean install

I can't believe nobody is developing for t719... Crying... Great device, no lineage os. Also t819

OTA upgrade
Wonderful work, thank you!
OTA update is not working!
Any idea?
Thanks!

New update working fine on 813 except issues with night mode not switching on and off as per customised schedule and can't find a setting that dims the screen Just before the screen turns off
Sent from my SM-T813 using XDA-Developers Legacy app

I flashed it on my T713 yesterday and works great. Have T713 only for 2 days and was about to returned it. I mean great screen , great ergonomics, but it was so lagy. I had like 15 FPS in injustise 2 and it was unplayeble.
Coming from nvidia shield, i was disappointed. Then in last effort to keep tablet I flashed you rom and it is night and day. Whit your rom iam happy with my tab S2. I mean games run so mutch better and over all it is mutch smoother. Only down side is, fast charging dont work, but thas only thing i found and can live whit out.
So thank you , I can enjoy my new tablet

Been a while since I've had a look at ROMs but IIRC, the fast charging capacity is kernel related. I will see if I can find out what is wrong (can't promise anything though)
Sent from my SM-T713 using Tapatalk

Icewyng said:
Been a while since I've had a look at ROMs but IIRC, the fast charging capacity is kernel related. I will see if I can find out what is wrong (can't promise anything though)
Sent from my SM-T713 using Tapatalk
Click to expand...
Click to collapse
Thank you!! That would be great.. bud even if you cant.. fast rom whitout fast charging is better then stock with fast charging.

Any chance we could add support for bootloader T813XXU2APJ1? Just let me know what you need.
edit: also T813XXU1APG2

KellyT84 said:
Thank you!! That would be great.. bud even if you cant.. fast rom whitout fast charging is better then stock with fast charging.
Click to expand...
Click to collapse
I agree. This ROM improved my T713 performance dramatically as well. Like I said, not guaranteed it will work. Last time I have modded stuff was back when Android was on version Jelly Bean... [emoji3]

[ROM][UNOFFICIAL][8.1.0] NucleaRom [2018-04-27]

Known issues:
You tell me
V1 Initial Release
XDA:DevDB Information
[ROM][UNOFFICIAL][8.1.0] NucleaRom [2018-04-27], ROM for the Xiaomi Mi A1
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
ROM Firmware Required: Oreo with TWRP
Based On: LineageOS
Version Information
Status: Stable
Created 2018-04-27
Last Updated 2018-04-27

Screenshots pls

can u maintain one rom and be get official status better than making alot of roms and leave it.

less customized,
better stability,
battery drains a little quicker for me,
overall good rom,
selinux permissive

fosseperme said:
INSTRUCTIONS
- Reboot forcedly in fastboot mode with vol - and power, and after return to TWRP
- Finally flash (without reboot the phone) Gapps Pico arm64 8.1 and Magisk in slot where is installed the system (you can easily understand this in the backup section of TWRP and see the system partition how space take)
- Make the first setup with the Wifi connected!
- Enjoy NucleaRom!
What's working :
Boots
RIL (Calls, SMS, Data)
Fingerprint
IR Blaster
Wi-Fi
Camera
Bluetooth
Video Playback
Audio
Sensors
Flash
LED
GPS
Volte
Known issues:
You tell me
V1 Initial Release
XDA:DevDB Information
[ROM][UNOFFICIAL][8.1.0] NucleaRom [2018-04-27], ROM for the Xiaomi Mi A1
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
ROM Firmware Required: Oreo with TWRP
Based On: LineageOS
Version Information
Status: Stable
Created 2018-04-27
Last Updated 2018-04-27
Click to expand...
Click to collapse
Hi, i'm one of the developers of NucleaRom, this build will never be Official nor it have our approval to be released, while we are an open source project everybody can build it and use but the lack of proper credits here and also the childish and rude behavior of the builder are a major concern for us and we advice to all users to not use this build, we already have an official maintainer for this device who will release the rom when we think it's ready to go for the public.

ok, you do not want to recognize my rom as official, but you can not come here and intimate people not to flash it. I will contact my lawyer.

fosseperme said:
I will contact my lawyer.
Click to expand...
Click to collapse
Lmao
Please use the logout button and never come back

fosseperme said:
ok, you do not want to recognize my rom as official, but you can not come here and intimate people not to flash it. I will contact my lawyer.
Click to expand...
Click to collapse
Wtf

fosseperme said:
ok, you do not want to recognize my rom as official, but you can not come here and intimate people not to flash it. I will contact my lawyer.
Click to expand...
Click to collapse
Wth? Seriously dude . Why dont they ban you?

fosseperme said:
ok, you do not want to recognize my rom as official, but you can not come here and intimate people not to flash it. I will contact my lawyer.
Click to expand...
Click to collapse
Screenshot of your lawyer? Does it boot? Or is it a blind build?

acuicultor said:
this build will never be Official nor it have our approval to be released, ... we advice to all users to not use this build, we already have an official maintainer for this device who will release the rom when we think it's ready to go for the public.
Click to expand...
Click to collapse
Thank you for speaking up. Looking forward to an official release

dmbardal said:
Thank you for speaking up. Looking forward to an official release
Click to expand...
Click to collapse
Absolutely, I don't know If you already used this ROM with another phone but this ROM has always been my favourite ROM since it's first release for ZUK Z1
MartinJesus23 (one of the developers of this ROM(? correct me if I am wrong)) is actively doing changes on GitHub for our device, so I also hope for an official release soon

From the Moderator Oka1
OK Fosseperme You postings are unacceptable and not allowed.
The Original developer of the ROM merely pointed out you provided no credit for his work, kanged it and, then posted within this thread in a threatening manner.
As such, this cannot be tolerated so ............
................ THIS THREAD IS CLOSED .............

[DISCONTINUED ROM][8.1][OMS][SigSpoofing] Unofficial LineageOS builds by Admicos

(I'm new to all this ROM development stuff, apologies if there's anything wrong with what I'm doing)
These are my personal LineageOS builds. They aren't much different from regular LOS, other than some added patches.
More details and sources over at: https://git.issizler.club/LineageOS/LineageOS-by-Admicos
Download: https://www.androidfilehost.com/?fid=11410963190603912814
What's working/not working: Should be same as official LineageOS
XDA:DevDB Information
Unofficial LineageOS builds by Admicos, ROM for the ZTE Axon 7
Contributors
admicos
Source Code: https://git.issizler.club/LineageOS
ROM OS Version: 8.x Oreo
Based On: LineageOS
Version Information
Status: Beta
Created 2019-01-04
Last Updated 2019-01-04

CHANGELOG
15.1-20190201 1d456849f4b154381071c9ebae87ccff
15.1-20190121 45f811aecd226524c3c68394f0781e10
15.1-20190115 e9c47b0062b822c118f918318289a7e4
LOS Repo Sync
15.1-20190104-2 37ff7fb6510d0d819e10e932d3e18f9d
Fixed WireGuard
15.1-20190104
Initial Release

Nice. The addition of sigspoofing and substratum service would make plain LOS usable for me. Straight LOS and themes were always iffy.
[emoji106]
ZTE Axon 7 A2017U, /e/ v0.1 ROM, microG (NoGapps), Multiboot, XDA Legacy

As nobody really posted here, I just wanted to say that this is working really well.
I had huge gps problems with the last 15.1 unofficial, but it works perfectly in this one and it has some very nice additions as well and is 100% stable for me even with xposed and magisk.
 @admicos Thank you very much and I really hope that, if you have the time, you continue making these.

New build being uploaded right now, no changes other than a LOS repo sync.
The last couple test builds I made were somewhat iffy, but this one seems pretty well. (The recolored boot animation didn't make it in for some reason, but the rest are fine)

Everytime when i reboot the system to os or recovery,the recovery looks replaced and i cant mount data.
Not sure what caused it,i just flashed this on my non treble axon 7

Predatorhaze said:
Everytime when i reboot the system to os or recovery,the recovery looks replaced and i cant mount data.
Not sure what caused it,i just flashed this on my non treble axon 7
Click to expand...
Click to collapse
boy ter here rediscovering the wonders of encryption and dm-verity check

New build being uploaded, another regular LOS repo sync, should be done in about an hour
--
Predatorhaze said:
Everytime when i reboot the system to os or recovery,the recovery looks replaced and i cant mount data.
Not sure what caused it,i just flashed this on my non treble axon 7
Click to expand...
Click to collapse
I'm not sure why that's happening either. Can you replicate this on official LOS? If you can, I'd suggest you try asking on their thread, they might know more.

Good ROM for a while, why not update it? Is there a new kernel upgrade for the top post?

[armitage] said:
As nobody really posted here, I just wanted to say that this is working really well.
I had huge gps problems with the last 15.1 unofficial, but it works perfectly in this one and it has some very nice additions as well and is 100% stable for me even with xposed and magisk.
@admicos Thank you very much and I really hope that, if you have the time, you continue making these.
Click to expand...
Click to collapse
What version of Xposed are you using? I've always wanted to try this ROM, but thought there wasn't an official Xposed yet. The others I knew at the time were reportedly shady.

Sorry for the long wait (kinda forgot about this existing :/), and sorry for the bad news;
As I am planning to switch to another phone, I cannot continue making this anymore.
I might continue this as a GSI or something, but I really don't know if that will happen, as Android source is a big mess that I don't think I, and my (reasonably fast) CPU are prepared to handle. (Any pointers to dealing with this are greatly appreciated)
It was a fun two years lurking around.
(ps: The source link is completely borked (and all my sources are gone). I probably should stop trying to be fancy and use a public Git server like a normal person the next time)

If your build env is on Docker, I can easily stage a build server for you. It won't be fast, but you can leave it running all night long if you need, and free up your computer.
Also, if you're not using Docker, I can help you set it up, so anyone else can easily build by themselves if they choose to do so.

Can I upgrade the kernel?
[9.0/8.1] Updated LOS Kernel [Version 3.18.136]

@admicos THREAD CLOSED!
In the OP, the mandatory link tp source code provides a HTTP 404 error.
Please advise the moderators' team if you want the thread to be re-opened and to update the link.

[ROM][9.0.0_r46][A2017X][OFFICIAL] Resurrection Remix 7.0.2

https://postimages.org/
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
​
Resurrection Remix the ROM has been based on LineageOS, SlimRoms, Omni and original Remix ROM builds, this creates an awesome
combination of performance, customization, power and the most new features, brought directly to your Device.
Many things that in previous versions were tweaked with mods, are now included by default in the ROM so, please enjoy!
Special thanks to, the LineageOS team, Omni team, SlimRoms and of course to all the supporters.​
​
see below​
​
see below​
​
see below​
https://postimages.org/
@DahakePL XDA Developers LineageOs Team Omni Team And Of Course To All The Supporters, Donators And Users​
Installation:
0. unlocked, O bootloader (universal v2 to start with or the one you prefer), suited twrp (I used the twrp3218), correct modem ...you know the drill
1. Copy RR zip, 9.0.0 gapps zip and Magisk 19.3 to your device
2. Boot into twrp recovery
3. Wipe cache, system, vendor & data
4. Flash ROM
5. Flash gapps
5a Reboot and setup phone ( if not booted first time, force reboot...and wait )
6. Flash Magisk 19.3
7. Reboot and enjoy !
Build :
A2017X RR 9.0.0 r46 v7.0.2 2019.08.12
A2017X RR 9.0.0_r46 v7.0.2 2019.08.23
RR-P-v7.0.2-20190920-axon7-Official.zip
RR-P-v7.0.2-20190922-axon7-Official.zip
RR-P-v7.0.2-20191027-axon7-Official.zip
RR-P-v7.0.2-20200112-axon7-Official.zip
Gapps : https://opengapps.org/
Magisk : https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Contributors
@raystef66
Source Code: https://github.com/ResurrectionRemix/platform_manifest
KERNEL SOURCE: https://github.com/OrdenKrieger/android_kernel_zte_msm8996 thnx @OrdenKrieger
ROM OS Version: 9.x PIE
ROM Kernel: Linux 3.18.x
ROM Firmware Required: Unlocked Bootloader, Latest TWRP Recovery
Based On: LineageOS device, vendor, kernel
Version Information : 9.0.0 v7.0.2
Status: Pure & Stable...afaik
Sec. Patches : 2020.01.01
Created : 2019.08.03
Last Updated : 2020.01.12

nice

thank you bro

Gonna try this one as well. Devs have flooded some great roms recently. thanks to all.

Thank you for this rom, I think is the best rom posted recently.
Just one thing, and sorry for the noob question and my english, I feel that GSI roms are more faster than this device specific roms, I have the vendor partition, so, should I flash treble zip in vendor first?
Sent from my Phh-Treble vanilla using Tapatalk

Any trip reports on battery standby drain and screen on time?

Phone Call Audio
I installed this ROM and loved it (I've used RR in the past).
Everything worked fine but for one major thing: while I can place and receive calls I cannot hear or be heard on said calls.
From what I've read this is likely because I have the wrong modem installed, but I cannot for the life of me determine which I should be using, so:
if I have U variant, what bootstack and modem should I flash? Any help truly appreciated!

BarbbasKid said:
I installed this ROM and loved it (I've used RR in the past).
Everything worked fine but for one major thing: while I can place and receive calls I cannot hear or be heard on said calls.
From what I've read this is likely because I have the wrong modem installed, but I cannot for the life of me determine which I should be using, so:
if I have U variant, what bootstack and modem should I flash? Any help truly appreciated!
Click to expand...
Click to collapse
If you have the U model, you need the universal bootstack and the U modem
Sent from my ZTE A2017X using Tapatalk

BarbbasKid said:
if I have U variant, what bootstack and modem should I flash? Any help truly appreciated!
Click to expand...
Click to collapse
I have a U variant and I used
A2017U_OreoModem.zip
and
A2017x_LineageOS15.1_UniversalBootstack_v2_by_DrakenFX.zip
from https://androidfilehost.com/?w=files&flid=270519
I am able to hear and be heard on calls with those and this rom.
Thanks for your work, raystef66!

eeyan said:
I have a U variant and I used
A2017U_OreoModem.zip
and
A2017x_LineageOS15.1_UniversalBootstack_v2_by_DrakenFX.zip
from https://androidfilehost.com/?w=files&flid=270519
I am able to hear and be heard on calls with those and this rom.
Thanks for your work, raystef66!
Click to expand...
Click to collapse
I appreciate you help identifying those files.
Now, however, I am getting an error when flashing RR everything flashes like normal, but at the end I get a red error:
"e2001: failed to update vendor image"
and then (obviously) a #7 error as result.
The only thing I can see that may be the cause is my device does not have a "Vendor" partition (though it didn't the first time I installed RR, either).
I'm in 3.2.1-8 by NFound then:
Flash A2017x_LineageOS15.1_UniversalBootstack_v2
Flash Modem
Flash RR
Then the error.
Any idea on how to fix this issue? I appreciate your help.

BarbbasKid said:
I appreciate you help identifying those files.
Now, however, I am getting an error when flashing RR everything flashes like normal, but at the end I get a red error:
"e2001: failed to update vendor image"
and then (obviously) a #7 error as result.
The only thing I can see that may be the cause is my device does not have a "Vendor" partition (though it didn't the first time I installed RR, either).
I'm in 3.2.1-8 by NFound then:
Flash A2017x_LineageOS15.1_UniversalBootstack_v2
Flash Modem
Flash RR
Then the error.
Any idea on how to fix this issue? I appreciate your help.
Click to expand...
Click to collapse
Use the PARTY vendor creation tool and take 500Mb from your System
Sent from my ZTE A2017X using Tapatalk

@raystef66 what's your preference between this boy and sl!m 8? I just saw this now so I'm a bit late to the party

Mazupicua said:
@raystef66 what's your preference between this boy and sl!m 8? I just saw this now so I'm a bit late to the party
Click to expand...
Click to collapse
:cyclops: you're not late to the party at all. The rom development has got a huge boast now since we can rely on Orden's sources.
I'm on Pie ofc and not on Oreo anymore since this all is happening. Slim would be ok but get a taste of this all going from PE over RR, VIPER, Havoc, LOS16....and more in the pipeline
Choices enough. My preference till now is ViperOS PIE
So enjoy the ride

raystef66 said:
:cyclops: you're not late to the party at all. The rom development has got a huge boast now since we can rely on Orden's sources.
I'm on Pie ofc and not on Oreo anymore since this all is happening. Slim would be ok but get a taste of this all going from PE over RR, VIPER, Havoc, LOS16....and more in the pipeline
Choices enough. My preference till now is ViperOS PIE
So enjoy the ride
Click to expand...
Click to collapse
ViperOS is really great,hope for Long-term support

​
NEW BUILD 2019.08.12
RR-P-v7.0.2-20190812-axon7-Unofficial
changelog :
*android-9.0.0_r46
*latest sec. patches 2019.08.01
*fixed MAC
*key reverse on boot (recent/home/back)
*SELinux enforcing
* ...
E N J O Y

raystef66 said:
​
NEW BUILD 2019.08.12
RR-P-v7.0.2-20190812-axon7-Unofficial
changelog :
*android-9.0.0_r46
*latest sec. patches 2019.08.01
*fixed MAC
*key reverse on boot (recent/home/back)
*SELinux enforcing
* ...
E N J O Y
Click to expand...
Click to collapse
Great work. Please do not be deterred by the low interest in your pie roms thus far. I believe in time the interest will pick up. Please keep at it.

@raystef66
Thx for the ROM it's really nice. Booted on the first try. For now I have one issue though. Can't get VoLTE to work. On the lastest Liquid Remix with VoLTE MOD and Speedy vendor I have working VoLTE. I can call and receive calls. On latest Resurrection Remix, ViperOS, DotOS when I select LTE only I can't get any signal. I've tried flashing Oreo modem but that didn't help either. Without selecting this opition I can't get working VoLTE. What could be the problem here?

squicky said:
@raystef66
Thx for the ROM it's really nice. Booted on the first try. For now I have one issue though. Can't get VoLTE to work. On the lastest Liquid Remix with VoLTE MOD and Speedy vendor I have working VoLTE. I can call and receive calls. On latest Resurrection Remix, ViperOS, DotOS when I select LTE only I can't get any signal. I've tried flashing Oreo modem but that didn't help either. Without selecting this opition I can't get working VoLTE. What could be the problem here?
Click to expand...
Click to collapse
Thnx ! Afaik VoLTE works out-of-the-box on ViperOS. @Masterjuggler confirmed that to me.
On RR, DotOS I cannot confirm this. I cannot check this myself since my carrier doesn't provide this.
Also, the Volte Mod isn't suited for device specific roms like the ones mentioned above.
So try ViperOS first and see if you can get VoLTE working
EDIT : updating Viper to latest august sec patches now. So perhaps wait a little bit to flash again

raystef66 said:
Thnx ! Afaik VoLTE works out-of-the-box on ViperOS. @Masterjuggler confirmed that to me.
On RR, DotOS I cannot confirm this. I cannot check this myself since my carrier doesn't provide this.
Also, the Volte Mod isn't suited for device specific roms like the ones mentioned above.
So try ViperOS first and see if you can get VoLTE working
EDIT : updating Viper to latest august sec patches now. So perhaps wait a little bit to flash again
Click to expand...
Click to collapse
First I tried all these ROMs without VoLTE Mod and then I tried with the Mod. When I choose LTE in IMS app I simply lose signal (No Service). It doesn't matter if it's RR, ViperOS or DotOS. Apart from this on ViperOS somehow Pixel Launcher was force closing.

squicky said:
@raystef66Can't get VoLTE to work.
Click to expand...
Click to collapse
Like ray said, I had it working fine for me. I even confirmed I had the ims LTE service registration in the phone hidden settings. Didn't have to change anything in the settings, worked on the first boot out of the box. I'm on a t-mobile based carrier for what it's worth.