Every time I reboot my phone, it resets to factory settings and I see the "Welcome" screen. It only does this when the time in TWRP is inaccurate (e.g. 10:03AM when it's 8:49PM). I've reinstalled twrp, reinstalled the ROM, locked and unlocked the bootloader, but nothing works. I just get the same blue screen.
I actually have the exact same issue
Anyone? (bump)
thats a strange issue you on custom rom? i dont have this device but i ordered it and this post getting me worried
captain here i had the same issue this morning when i tryed to reboot to add some mods on Octos Rom it's a bug in force encryption i really want my data to be secured and encrypted but at the same time it makes it hard to play with.
Solution : flash stock recovery then factory reset the phone
---------- Post added at 03:37 PM ---------- Previous post was at 03:26 PM ----------
nitinvaid said:
thats a strange issue you on custom rom? i dont have this device but i ordered it and this post getting me worried
Click to expand...
Click to collapse
u should be worried this new encryption thing is awesome for normal users but it will make it hard for the devs
Do you have f2fs or extv4 partition? f2fs is currently having some issue..better to stay with extv4 for some time
venomus001 said:
captain here i had the same issue this morning when i tryed to reboot to add some mods on Octos Rom it's a bug in force encryption i really want my data to be secured and encrypted but at the same time it makes it hard to play with.
Solution : flash stock recovery then factory reset the phone
---------- Post added at 03:37 PM ---------- Previous post was at 03:26 PM ----------
u should be worried this new encryption thing is awesome for normal users but it will make it hard for the devs
Click to expand...
Click to collapse
i was using nexus bcoz of development and bought one plus becouse of development
is there any way to avoid it?
nitinvaid said:
i was using nexus bcoz of development and bought one plus becouse of development
is there any way to avoid it?
Click to expand...
Click to collapse
It worths every penny keep it on rooted stable stock in my opinion
Unbrick Tutorial
OK, so far I've used this unbrick tutorial to get me completely back to stock (version 3.5.1) and now I'm waiting for the OxygenOS to finish the OTA. Will report back when finished.
venomus001 said:
It worths every penny keep it on rooted stable stock in my opinion
Click to expand...
Click to collapse
i am a theme developer so i cant use stock
nitinvaid said:
i am a theme developer so i cant use stock
Click to expand...
Click to collapse
Then u ll have to disable encryption so u can use whatever rom u like without bugs
venomus001 said:
Then u ll have to disable encryption so u can use whatever rom u like without bugs
Click to expand...
Click to collapse
How to disable encryption? need bootloader or a kernel??
Still no luck. Does anyone know why the time is off by several hours in TWRP?
nitinvaid said:
How to disable encryption? need bootloader or a kernel??
Click to expand...
Click to collapse
use OnePlus3T-ToolKit-v2.0 to disable it
also don't use PIN lock on ur rom
---------- Post added at 01:28 AM ---------- Previous post was at 01:05 AM ----------
RockCityGeek said:
Still no luck. Does anyone know why the time is off by several hours in TWRP?
Click to expand...
Click to collapse
did u try flashing the stock recovery if no then u need an other way to clean data partition as sed it's and encryption problem
1- download OnePlus3T-ToolKit-v2.0
2- connect ur device in fastboot
3- choose flash stock recovery
4- flash stock recovery and wait for it to boot
Note : if u dont want to lose ur data try flashing TWRP 3.0.4 insted
[delete]
[delete]
Related
Hi,
I want to root my device, which i have upgraded recently to 4.1.2
the thing is, I found some information in root threads regarding build no. like XXAMA1, XXAMA2, XXAMA4 ...etc
what are the differences between them? if all of them are 4.1.2 JB?! will anyone work?
to make it easier, which thread can work to root my SG3mini device:
Android version: 4.1.2
Baseband version: I8190XXAMA3
Kernel version: 3.0.31-860525
Build number: JZ054K.I8190XXAMA3
You can just root the one you got. No need to re-flash the whole rom.
---------- Post added at 10:54 PM ---------- Previous post was at 10:39 PM ----------
Here is also a very good explanation on these PDA/PHONE/CSC codes.
tys0n said:
You can just root the one you got. No need to re-flash the whole rom.
---------- Post added at 10:54 PM ---------- Previous post was at 10:39 PM ----------
Here is also a very good explanation on these PDA/PHONE/CSC codes.
Click to expand...
Click to collapse
can you root with a 4.1.1 custom version on a 4.1.2?
TerenceTP7 said:
can you root with a 4.1.1 custom version on a 4.1.2?
Click to expand...
Click to collapse
Yes you can, but only if you make a factory reset first. Otherwise you'll have bootloops or force closed apps.
tys0n said:
Yes you can, but only if you make a factory reset first. Otherwise you'll have bootloops or force closed apps.
Click to expand...
Click to collapse
now i have a official firmware 4.1.2 ,baseband I8190XXAMA2.before this i had a rooted 4.1.1 by avicoh.but my phone didnt boot anymore,so i flashed with the official 4.1.2 and after that with PARAM.
so now i need to factory reset,but the one that i now have isnt the one that came with my phone from the store.doesnt it give any problems when i factory reset?
original from the store was 4.1.1 JB
TerenceTP7 said:
now i have a official firmware 4.1.2 ,baseband I8190XXAMA2.before this i had a rooted 4.1.1 by avicoh.but my phone didnt boot anymore,so i flashed with the official 4.1.2 and after that with PARAM.
so now i need to factory reset,but the one that i now have isnt the one that came with my phone from the store.doesnt it give any problems when i factory reset?
original from the store was 4.1.1 JB
Click to expand...
Click to collapse
No it shouldn't be any problem. Factory reset makes sure there is no leftovers from previous install. Clears cache, settings, user data.
tys0n said:
No it shouldn't be any problem. Factory reset makes sure there is no leftovers from previous install. Clears cache, settings, user data.
Click to expand...
Click to collapse
alright,i trust you on this.i did the reset my phone rebooted and now its stuck on the bootlogo(galaxys3mini gt-i8190).do i need to wait?or?
..
..
still stuck on bootlogo after 10minutes.doesnt look good.use param again?
---------- Post added at 06:04 PM ---------- Previous post was at 05:40 PM ----------
ok,that didnt work..man im getting headache of this..
i booted my phone again using PARAM.
do you know a root version for my phone?maybe a version that clear all my data too?
---------- Post added at 06:28 PM ---------- Previous post was at 06:04 PM ----------
TerenceTP7 said:
alright,i trust you on this.i did the reset my phone rebooted and now its stuck on the bootlogo(galaxys3mini gt-i8190).do i need to wait?or?
..
..
still stuck on bootlogo after 10minutes.doesnt look good.use param again?
---------- Post added at 06:04 PM ---------- Previous post was at 05:40 PM ----------
ok,that didnt work..man im getting headache of this..
i booted my phone again using PARAM.
do you know a root version for my phone?maybe a version that clear all my data too?
Click to expand...
Click to collapse
the one that you have http://forum.xda-developers.com/showthread.php?t=2178346 is this a root version?for the netherlands?can i use it on my phone?
Just flash a wipe.tar and then your firmware.
I never had to flash param.lfs to get it boot.
Once I had to pull the battery and power on again when it got stuck on boot after flash.
tys0n said:
Just flash a wipe.tar and then your firmware.
I never had to flash param.lfs to get it boot.
Once I had to pull the battery and power on again when it got stuck on boot after flash.
Click to expand...
Click to collapse
i did used it once that wipe.tar but get stuck on bootscreen.
do you need to wait long on bootscreen while flashing with wipe.tar?
and how does it work?just odin>pda,select wipe.tar>start?
TerenceTP7 said:
i did used it once that wipe.tar but get stuck on bootscreen.
do you need to wait long on bootscreen while flashing with wipe.tar?
and how does it work?just odin>pda,select wipe.tar>start?
Click to expand...
Click to collapse
Yes flash as pda. It's basicly the same as a factory reset.
If your phone reboots after, just put it in download again and flash firmware.
tys0n said:
Yes flash as pda. It's basicly the same as a factory reset.
If your phone reboots after, just put it in download again and flash firmware.
Click to expand...
Click to collapse
and what if its get stuck on bootscreen again.use PARAM?
TerenceTP7 said:
and what if its get stuck on bootscreen again.use PARAM?
Click to expand...
Click to collapse
Afaik the param.lfs is mostly just a bunch of pictures. Don't know what it does, except loads the phone with startup/downloadmode pictures.
http://forum.xda-developers.com/showthread.php?t=1750645
http://z4ziggy.wordpress.com/2010/09/18/looking-into-param-lfs-file/
tys0n said:
Afaik the param.lfs is mostly just a bunch of pictures. Don't know what it does, except loads the phone with startup/downloadmode pictures.
http://forum.xda-developers.com/showthread.php?t=1750645
http://z4ziggy.wordpress.com/2010/09/18/looking-into-param-lfs-file/
Click to expand...
Click to collapse
i dont get it.i have my 4.1.2 rooted now,but after flashing ,my phone doesnt boot.it only boots when i flash the PARAM file.i restarded my phone to check if that works and that works fine.i dont think this is a big problem,is it?
at first sight everything works fine.
WIPE doesnt work,and factory reset doesnt work either.is there a option to do this manually.i have clear master,is that the same?
tys0n said:
You can just root the one you got. No need to re-flash the whole rom.
---------- Post added at 10:54 PM ---------- Previous post was at 10:39 PM ----------
Here is also a very good explanation on these PDA/PHONE/CSC codes.
Click to expand...
Click to collapse
thank you tys0n for your replies! i kept my CSC, didn't change it.. since i'm already having 4.1.2 (last firmware for s3 mini till now)
and followed this way to root my device:
http://forum.xda-developers.com/showthread.php?t=2150979
and it worked
the only thing is, this way increased the flash counter! i dont know how is this bad, but i guess just if i want to give it to someone to check it, they will know, right?!
BUT I found other rooted ROM that they will reset binary count after flash to "none"! and will show firmware as "official" instead of "custom"..
anyway, good to learn and i'm saying all that just in case any noob like me saw this thread in the future maybe they can find one useful info or two
sorry TerenceTP7 that i can't help you.. still new to those things..
and thank you again tys0n
Sv: [Q] for 4.1.2 root, what is the difference between build no.?
Search triangle away here on xda. It's an app that will reset your binary count to zero
Sent through time and space from my s3mini.
Hi
I have ATT galaxy note 3 first time I installed a rom I did it over the stock rom slot, no biggie, to make a long story short last rom I had was alliance last version, didn’t work for me, so I decided to install (FireNoteDeodexV20XGrandFinale)
So I booted into Safestrap 3.75(TWRP v2.7.1.0) by simply restarting my device and got that recovery or continue buttons.
So I did a factory wipe but I also did an advance wipe and checked (system).
After that I went to install and selected the above ROM zip and installed it and after I hit continue at the safestrap screen where it also says disabled it always has. It stays blank.
So I booted up to SS again and now whenever I select factory wipe or system wipe or try to mount I get the same message E:Unable to mount ‘/system’ and E:Unable to mount ‘/systemorig’
And now im stuck with no phone and cant install any ROM
Theres a lot of threads about this but please oh please masters bare with me I just need step by step, what should I do and what files do I need to download.
Your help is highly appreciated.
Are you on Jellybean or Kitkat..this should be in Q&A section. But we will try to get you going
FireKatV11...FireGearV16
Thx for the replay
On kitkat
mushtie2 said:
Thx for the replay
On kitkat
Click to expand...
Click to collapse
If you have a computer. And a sdcard slot on it download and install a kitkat rom of your choice from the att note 3 rom section. Because you most likely are on the newest bootloader you can't flash jb roms. You have to stick to kitkat roms.
done
i just downloaded UrDroid_ATT_Stock_KitKat_N900AATTCNC2_Rooted_Odexed_Ver_2.zip
warfenix said:
If you have a computer. And a sdcard slot on it download and install a kitkat rom of your choice from the att note 3 rom section. Because you most likely are on the newest bootloader you can't flash jb roms. You have to stick to kitkat roms.
Click to expand...
Click to collapse
done
i just downloaded UrDroid_ATT_Stock_KitKat_N900AATTCNC2_Rooted_Odexe d_Ver_2.zip
mushtie2 said:
done
i just downloaded UrDroid_ATT_Stock_KitKat_N900AATTCNC2_Rooted_Odexe d_Ver_2.zip
Click to expand...
Click to collapse
Put the card back in phone . Wipe phone like befor and flash the urdroid. Let me know if that doesn't work
warfenix said:
Put the card back in phone . Wipe phone like befor and flash the urdroid. Let me know if that doesn't work
Click to expand...
Click to collapse
Didnt work tried and it failed.
You should look in the general section for att note 3 and find the Odin files for kitkat and Odin restore your phone. Then start over rooting and installing a custom rom. Probably your best bet.
---------- Post added at 01:58 PM ---------- Previous post was at 01:56 PM ----------
mushtie2 said:
Didnt work tried and it failed.
Click to expand...
Click to collapse
Befor that. Thoufh. Did you check md5sum to make sure it was a complete download and not corrupted
warfenix said:
You should look in the general section for att note 3 and find the Odin files for kitkat and Odin restore your phone. Then start over rooting and installing a custom rom. Probably your best bet.
---------- Post added at 01:58 PM ---------- Previous post was at 01:56 PM ----------
Befor that. Thoufh. Did you check md5sum to make sure it was a complete download and not corrupted
Click to expand...
Click to collapse
how do i check md5sum?
mushtie2 said:
how do i check md5sum?
Click to expand...
Click to collapse
I believe urdroids op has it posted. And you can compare it to one you get. There are md5sum checkers on the playstore
you sir are the master of the universe thanks a million i actually went over to the soft brick thread and now my phone is fresh and new.
thx again and let me know if you need me to wash your car or pickup your groceries.
mushtie2 said:
you sir are the master of the universe thanks a million i actually went over to the soft brick thread and now my phone is fresh and new.
thx again and let me know if you need me to wash your car or pickup your groceries.
Click to expand...
Click to collapse
Lmao well its good you got it working again. I've been in the boat a few times
im on twrp v2.8.1.1 and im trying to flash roms and i keep getting failed... i factory reset and wipe and still im i doing something wrong? im on lollipop now..
re: failure flashing in twrp
markysd said:
im on twrp v2.8.1.1 and im trying to flash roms and i keep getting failed... i factory reset and wipe and still im i doing something wrong? im on lollipop now..
Click to expand...
Click to collapse
You need to be more specific as to why it failed, read the text on twrp's
screen which tells you a little bit about the cause of the failure.
Good luck!
Misterjunky said:
You need to be more specific as to why it failed, read the text on twrp's
screen which tells you a little bit about the cause of the failure.
Good luck!
Click to expand...
Click to collapse
well i got it to work now.. idk what happen.. just get a red lettering says failed.. but now s pen still wont work might have to go back to my other post about it
markysd said:
im on twrp v2.8.1.1 and im trying to flash roms and i keep getting failed... i factory reset and wipe and still im i doing something wrong? im on lollipop now..
Click to expand...
Click to collapse
Bad download and upgrade already . twrp is been upgraded lol.
BACARDILIMON said:
Bad download and upgrade already . twrp is been upgraded lol.
Click to expand...
Click to collapse
whats the latest twrp?
2.8.6 or so
---------- Post added at 11:18 PM ---------- Previous post was at 11:17 PM ----------
http://forum.xda-developers.com/showthread.php?t=2915588
BACARDILIMON said:
2.8.6 or so
---------- Post added at 11:18 PM ---------- Previous post was at 11:17 PM ----------
http://forum.xda-developers.com/showthread.php?t=2915588
Click to expand...
Click to collapse
ok going to update it... maybe this will six my s pen not working also
No it wont. We need ur full story in one thread.
As it says in the title. How to i get it to install. My Tablet is rooted.
Updating this tab to lollipop isn't a good idea (lots of bugs) but have a look here: http://forum.xda-developers.com/memo-pad-7/general/me176c-x-collection-roms-updates-t3012965
Saarge said:
Updating this tab to lollipop isn't a good idea (lots of bugs) but have a look here: http://forum.xda-developers.com/memo-pad-7/general/me176c-x-collection-roms-updates-t3012965
Click to expand...
Click to collapse
I had seen that but it didnt work at all.
Dublin2275 said:
I had seen that but it didnt work at all.
Click to expand...
Click to collapse
If you have a ww sku try to put this file (http://dlcdnet.asus.com/pub/ASUS/EeePAD/ME176C/UL-K013-WW-12.10.1.36_KK-user.zip) on the root of you microSD card and reboot the tab, it should try to flash it (well not on first reboot, you'll have a notification asking you if you want to do the update); if this doesn't work either try the nandroid (https://www.androidfilehost.com/?fid=24052804347832070) from jerbear, it was done on an unmodified me176c with lollipop, you must use the tethered recovery, make a backup, reboot, replace your back up files by the files of the nandroid, then reuse the tethered recovery and restore from the new back up. Ask jerbear from this forum for further explanation, i'm just a user who had the same problem, not a specialist.
---------- Post added at 10:49 PM ---------- Previous post was at 10:48 PM ----------
Ps; the system will do an update after the nandroid restore, it is an older version of the me176c's lollipop rom.
Saarge said:
If you have a ww sku try to put this file (http://dlcdnet.asus.com/pub/ASUS/EeePAD/ME176C/UL-K013-WW-12.10.1.36_KK-user.zip) on the root of you microSD card and reboot the tab, it should try to flash it (well not on first reboot, you'll have a notification asking you if you want to do the update); if this doesn't work either try the nandroid (https://www.androidfilehost.com/?fid=24052804347832070) from jerbear, it was done on an unmodified me176c with lollipop, you must use the tethered recovery, make a backup, reboot, replace your back up files by the files of the nandroid, then reuse the tethered recovery and restore from the new back up. Ask jerbear from this forum for further explanation, i'm just a user who had the same problem, not a specialist.
---------- Post added at 10:49 PM ---------- Previous post was at 10:48 PM ----------
Ps; the system will do an update after the nandroid restore, it is an older version of the me176c's lollipop rom.
Click to expand...
Click to collapse
I have the ME176CX not the ME176C i think that has something to do with it
Dublin2275 said:
I have the ME176CX not the ME176C i think that has something to do with it
Click to expand...
Click to collapse
No, it's the same rom, the difference between them is just the quality of the cams, btw i have a 176cx too and can guaranty you it works.
Saarge said:
No, it's the same rom, the difference between them is just the quality of the cams, btw i have a 176cx too and can guaranty you it works.
Click to expand...
Click to collapse
Does that update mess up the current root i have? Will i need to do a fresh install?
Saarge said:
No, it's the same rom, the difference between them is just the quality of the cams, btw i have a 176cx too and can guaranty you it works.
Click to expand...
Click to collapse
And also if i do a factory reset will i still have the update or can i get it all the way back?
Dublin2275 said:
Does that update mess up the current root i have? Will i need to do a fresh install?
Click to expand...
Click to collapse
You'll have to root again indeed, but remember what i said in the start, you're likely to regret it if you manage to do the update, it's a very bugged one.
---------- Post added at 09:51 AM ---------- Previous post was at 09:44 AM ----------
Dublin2275 said:
And also if i do a factory reset will i still have the update or can i get it all the way back?
Click to expand...
Click to collapse
a factory reset doesn't give you the original rom, the update will still be there, the downgrade is a very tricky process, and i answered you only because you asked, but i repeat myself, you should really keep your tab the way it is now, i regretted having done the update for months until someone finally found a way to roll-back to kitkat.
With lollipop you'll have:
-memory leak (can be fixed anyway).
-overheating.
-crashes.
-apps closing themselves or refusing to launch.
-random reboots of the tab itself.
-some users even had clock issues on the tab (too slow).
-others had battery life issue (tablet discharging too fast).
---------- Post added at 09:56 AM ---------- Previous post was at 09:51 AM ----------
oh and i forgot, google apps crashs.
Post Deleted
fastboot oem unlock
Will this wipe everything?
sweetboy02125 said:
fastboot oem unlock
Will this wipe everything?
Click to expand...
Click to collapse
yes, but if you tried the updated method and it worked with you it wont wipe any thing because that means your bootloader is already unlocked.
Can you make a PB2-650Y flashable zip? I use the 650M on a 650Y device and the radios gonne
[email protected] said:
Can you make a PB2-650Y flashable zip? I use the 650M on a 650Y device and the radios gonne
Click to expand...
Click to collapse
sorry i can't as i said this is not my work i just collected the information from different threads to one thread.
i found this if it is what you are looking for
Stock Binaries for Phab 2
PB2-650Y_USR_S023_1608101830_MP1V2_ROW.zip
https://forum.xda-developers.com/devdb/project/dl/?id=22151
this works? i want twrp root and xposed on my lenovo phab its a great multimedia phone might get me into 6'' phones
i mean even doh i bought it new i dont really care for warrenty.... i mean sucks to break it but i cant stand ads on youtube
reggiexp said:
this works? i want twrp root and xposed on my lenovo phab its a great multimedia phone might get me into 6'' phones
i mean even doh i bought it new i dont really care for warrenty.... i mean sucks to break it but i cant stand ads on youtube
Click to expand...
Click to collapse
sorry for taking me too long to answer. to be honest with you i tried this way over ten times with my phone and some of my friend. for me and some others it worked from the first time bout for others they had to go through the procedure more than one time till they succeeded. and as you see no one in this thread said if they tried it and if it worked smoothly with them or not.
FALYA said:
sorry for taking me too long to answer. to be honest with you i tried this way over ten times with my phone and some of my friend. for me and some others it worked from the first time bout for others they had to go through the procedure more than one time till they succeeded. and as you see no one in this thread said if they tried it and if it worked smoothly with them or not.
Click to expand...
Click to collapse
hi okay all good but there is now way to boot recovery :/ both botton doesnt nothing :/ and only down makes a quick spalsh then turns off
when i get that lenovo menu it keeps rebooting to the android recovery :/ not trwp :/ im sad :/
---------- Post added at 08:33 PM ---------- Previous post was at 07:55 PM ----------
i think root doesnt work anymore :/ im sad.. now i have no use of this phone
Worked ?
Hey did u succeeded ? Or phone is dead yet ?
sushil888 said:
Hey did u succeeded ? Or phone is dead yet ?
Click to expand...
Click to collapse
rip i think :/
reggiexp said:
hi okay all good but there is now way to boot recovery :/ both botton doesnt nothing :/ and only down makes a quick spalsh then turns off
when i get that lenovo menu it keeps rebooting to the android recovery :/ not trwp :/ im sad :/
---------- Post added at 08:33 PM ---------- Previous post was at 07:55 PM ----------
i think root doesnt work anymore :/ im sad.. now i have no use of this phone
Click to expand...
Click to collapse
just use the very last method ( if something went wrong )and you will have your phone working as new
i haven't tried it on your basband version. but did you reboot normally to Android first? if you did try to flash twrp again. I'm not sure if it will work with baseband cause as i said i haven't tried it on this update.
nejofer said:
Hello,
I am having difficulties about flashing the TWRP recovery. I followed your step #3 procedure and successfully flashed the TWRP then I went to step #4 and I held the [power button] and [vol -] at the same time and selected the recovery option, then the stock recovery shows up instead of TWRP recovery.
My phone info.
Lenovo Phab 2 650M 6.0 Marshmallow
Baseband Verson : PB2-650M_A_V044_170726
Build number: PB2-650M_S040_170725_ROW
Click to expand...
Click to collapse
same man. there is no way to root this phone :/
as i told you i haven't tried it on the new baseband.
i think it only works with baseband 170406 and earlier.
nejofer said:
I actually manage to root the phone after a couple of tries. Thanks Falya.
I have a question tho, how do you install the Xposed framework in this device? I found a installer from the files from the link you provided.
Click to expand...
Click to collapse
well thank you for giving us your feedback :good: just copy the xposeed framework apk to your phone and install it normaly after that run the app and chose install then install from recovery.
Request
nejofer said:
I actually manage to root the phone after a couple of tries. Thanks Falya.
I have a question tho, how do you install the Xposed framework in this device? I found a installer from the files from the link you provided.
Click to expand...
Click to collapse
I k i m asking 2 much ....
But can u do video tutorial or your detailed steps may b.thanx
this the best i can do it's very easy to install. just install the apk then choose install, install via recovery, grant supersu and it would reboot by it self then it will be installed
sushil888 said:
I k i m asking 2 much ....
But can u do video tutorial or your detailed steps may b.thanx
Click to expand...
Click to collapse
yes i want root on my lenovo coudl you explain how u did it :=) we all want
---------- Post added 1st September 2017 at 12:00 AM ---------- Previous post was 31st August 2017 at 11:51 PM ----------
nejofer said:
I actually manage to root the phone after a couple of tries. Thanks Falya.
I have a question tho, how do you install the Xposed framework in this device? I found a installer from the files from the link you provided.
Click to expand...
Click to collapse
if you could share details etc? wat version are you using? did u do the ota update?
Suggest....
One of my friend suggested' think abt system less root' magisk ? Any one ?? Hmmm