Hi
i need the misc partition backup from any working p9plus
My vie-l29 was bricked and to unbrick it i used a factory board firmware of an al10 that erase all partition and recover them but the misc partition is missing ,so the phone have no back and home button , no notification bar no sound and no wifi, if i update to any rom it will stuck to boot logo ( finaly updated to v29b170 but work only if i don't flash boot)
I think the problem is comming from this partition "misc" it's a configuration partition i think
So if any one can share this partition it will be helpfull
No mater from l29 l09 or al10 i want give it a try
Thank you
any one can help pls , im not sure it will work but i want give a try
thank you
makabress said:
any one can help pls , im not sure it will work but i want give a try
thank you
Click to expand...
Click to collapse
can you boot into erecovery and just reflash stock ROM? vol up + power and recovery
Deviatorz said:
can you boot into erecovery and just reflash stock ROM? vol up + power and recovery
Click to expand...
Click to collapse
I can boot into recovery and flash a stock firmware but the phone will stuck in boot logo after
Allready fully cleaned phone using "fastboot erase_emmc_all"
And entred the phone into download mode "huawei com 1.0" and flashed with a factory rom vie-al10m053
And than with the stock rom and nothing work
If i flash a boot and recovery from the factory rom and system/cust/datauser/cache from a stock rom the phone will boot but no sound no wifi
If i flash a twrp in recovery i can't boot into recovery it will stuck in logo
I can root the phone with kingroot from pc if there is somthing to edit
Thank you
makabress said:
I can boot into recovery and flash a stock firmware but the phone will stuck in boot logo after
Allready fully cleaned phone using "fastboot erase_emmc_all"
And entred the phone into download mode "huawei com 1.0" and flashed with a factory rom vie-al10m053
And than with the stock rom and nothing work
If i flash a boot and recovery from the factory rom and system/cust/datauser/cache from a stock rom the phone will boot but no sound no wifi
If i flash a twrp in recovery i can't boot into recovery it will stuck in logo
I can root the phone with kingroot from pc if there is somthing to edit
Thank you
Click to expand...
Click to collapse
Have u try to use Dc Phoenix?
https://www.dc-unlocker.com/DC-Phoenix-flash-repair-tutorial
Sent from my VIE-L29 using XDA Labs
Mostar088 said:
Have u try to use Dc Phoenix?
https://www.dc-unlocker.com/DC-Phoenix-flash-repair-tutorial
Sent from my VIE-L29 using XDA Labs
Click to expand...
Click to collapse
Yes trayed with dc-phoenix the result is the same ,no wifi no sound no home button no notification barre
makabress said:
Yes trayed with dc-phoenix the result is the same ,no wifi no sound no home button no notification barre
Click to expand...
Click to collapse
Try ask someone in the root/twrp thread. If someone can backup and share to u.
Sent from my VIE-L29 using XDA Labs
Mostar088 said:
Try ask someone in the root/twrp thread. If someone can backup and share to u.
Sent from my VIE-L29 using XDA Labs
Click to expand...
Click to collapse
Ok i will do
Thank you
How can you flash the partition file?
twrp or fastboot?
M.KK said:
How can you flash the partition file?
twrp or fastboot?
Click to expand...
Click to collapse
Fastboot or in my case with dc-pheonix
pls if any one can do this just use this command in adb : adb pull /dev/block/mmcblk0p20 c:\misc.img
and upload the misc.img it will take you a few second
thank you
makabress said:
Fastboot or in my case with dc-pheonix
Click to expand...
Click to collapse
Ok
You can not solve this problem by using mic file.ok
You can flash the complete stock .
By the
Fastboot flash zip (file name).zip
First the update.zip
And then
Data file to your local.ok
M.KK said:
Ok
You can not solve this problem by using mic file.ok
You can flash the complete stock .
By the
Fastboot flash zip (file name).zip
First the update.zip
And then
Data file to your local.ok
Click to expand...
Click to collapse
Allready flashed all the stock firmware ,with fastboot ,and with the recovery mode , /erased all partition and reflashed with stock
Flashed with a factory board software nothing make the phone stable
Have donne a full emmc erase "fastboot erase_emmc_all"
And entred the phone in download mode "huawei com 1.0" like qload 9008 and flashed but nothing change
Reflashed different oeminfo and nothing
Finaly flashed with nxt-l29 firmware for test and now everythink work except wifi and sound
Misc is a config partition and not integrated to the stock rom like the old generation,it come with the phone
My misc partition is wiped this is way i ask for it, it's the last test that i have to do
I have unbricked other huawei like my nxt and a g8 by replacing partition comming from working phone
Thank you
makabress said:
Allready flashed all the stock firmware ,with fastboot ,and with the recovery mode , /erased all partition and reflashed with stock
Flashed with a factory board software nothing make the phone stable
Have donne a full emmc erase "fastboot erase_emmc_all"
And entred the phone in download mode "huawei com 1.0" like qload 9008 and flashed but nothing change
Reflashed different oeminfo and nothing
Finaly flashed with nxt-l29 firmware for test and now everythink work except wifi and sound
Misc is a config partition and not integrated to the stock rom like the old generation,it come with the phone
My misc partition is wiped this is way i ask for it, it's the last test that i have to do
I have unbricked other huawei like my nxt and a g8 by replacing partition comming from working phone
Thank you
Click to expand...
Click to collapse
i give the file path?
M.KK said:
i give the file path?
Click to expand...
Click to collapse
File path inside misc folder? Or what?
M.KK said:
i give the file path?
Click to expand...
Click to collapse
File path inside misc folder? Or what?
All i need is someone share with me this misc partition, that i can be fixed ,if it work than the problem is soft if not than the problem is hardware
If any one can help just do this command:
adb pull /dev/block/mmcblk0p20 c:\misc.img
and upload the misc.img it will take you a few second
Thank you any way
makabress said:
All i need is someone share with me this misc partition, that i can be fixed ,if it work than the problem is soft if not than the problem is hardware
If any one can help just do this command:
adb pull /dev/block/mmcblk0p20 c:\misc.img
and upload the misc.img it will take you a few second
Thank you any way
Click to expand...
Click to collapse
Brother I help you but I have boot loader is locked and I unlocked the boot loader may all data lost I think you now about that.
If you have alternate about I can help the partition file is in boot.img or recovery.img our data file or UPDATE.PP ?
M.KK said:
Brother I help you but I have boot loader is locked and I unlocked the boot loader may all data lost I think you now about that.
If you have alternate about I can help the partition file is in boot.img or recovery.img our data file or UPDATE.PP ?
Click to expand...
Click to collapse
if your bootloader is locked than you can't help me
thank you any way
has anyone done this for you yet? if not ill happily unlock my bootloader, i have L09 new zealand model, i have one more day of work before my days off, so will organise in a few hours
Related
Hry guys. Since miui is not for me. How do i revert back to the stock recovery so i can use the updates? Cheers
deepsnoozer said:
Hry guys. Since miui is not for me. How do i revert back to the stock recovery so i can use the updates? Cheers
Click to expand...
Click to collapse
Hi,
You have to flash stock recovery via ADB. Only image 1 not 2. Than you can easy flash a stock rom via dload Method.
All you need is here:
http://forum.xda-developers.com/asc...26-to-b133-t2888976/post55708921#post55708921
Sent from my HUAWEI P7-L10 using XDA Free mobile app
87insane said:
Hi,
You have to flash stock recovery via ADB. Only image 1 not 2. Than you can easy flash a stock rom via dload Method.
All you need is here:
http://forum.xda-developers.com/asc...26-to-b133-t2888976/post55708921#post55708921
Sent from my HUAWEI P7-L10 using XDA Free mobile app
Click to expand...
Click to collapse
The easy way is to flash with flashify! Download it from playstore, put your stock recovery on sd card- start flashify and flash recovery.
Superwitschi said:
The easy way is to flash with flashify! Download it from playstore, put your stock recovery on sd card- start flashify and flash recovery.
Click to expand...
Click to collapse
Only flash recovery.img with flashify?
Not flash recovery2.img?
yes only the recovery.img!!!!
Superwitschi said:
yes only the recovery.img!!!!
Click to expand...
Click to collapse
Ok thanks...
Dear all. Iam back to stock thabk you so much. Oh btw i used abd
deepsnoozer said:
Dear all. Iam back to stock thabk you so much. Oh btw i used abd
Click to expand...
Click to collapse
Mate, please describe how you did it with ADB in detailed
radostorm said:
Mate, please describe how you did it with ADB in detailed
Click to expand...
Click to collapse
Standard doing....
Sent from my HUAWEI P7-L10 using XDA Free mobile app
radostorm said:
Mate, please describe how you did it with ADB in detailed
Click to expand...
Click to collapse
The same way you have flashed TWRP.
DJ BlackEagle said:
The same way you have flashed TWRP.
Click to expand...
Click to collapse
Hi,
I need help... I'm trying to go back to stock recovery & firmware, I have already tried everything and I'm absolutely fustrated:crying::crying::crying:
1.- I had TWRP recovery and MIUI, the phone (ASCEND P7-L10) is rooted
2.- After downloading flashify and the stock recovery, I have installed the stock recovery, everything OK.
3.- Rebbot into recovery and when I try to wipe data and/or cache it says:
data wipe completed (or cache wipe completed)
huawei cust fail
If I try to install any ROM B120, B126, B133, B135... I always get the same error, "cust fail"
If I reboot the phone still has MIUI... but I need to restore to factory recovery/firmware...
Help needed, I'm going to hit the roof...
thanks in advance!
Put your original firmware on dload in sd card, flash original recovery with fastboot or flashify, shut down your phone. Now press power volume- and volume+ ! This will install the original firmware.
siasegos said:
...
3.- Rebbot into recovery and when I try to wipe data and/or cache it says:
data wipe completed (or cache wipe completed)
huawei cust fail
...
Click to expand...
Click to collapse
Read my tutorial but additionaly in point 4. you must flashing also cust.img by Fastboot (make command: Fastboot flash cust cust.img) It always working.
Ziolek67 said:
Read my tutorial but additionaly in point 4. you must flashing also cust.img by Fastboot (make command: Fastboot flash cust cust.img) It always working.
Click to expand...
Click to collapse
Before reading your post I've been doing some test and after flashing boot.img sotck firmware has been installed, but I still have cust fail error.
Now I have read your tuto but where I can download cust .img??
Many thanks for your help
siasegos said:
Before reading your post I've been doing some test and after flashing boot.img sotck firmware has been installed, but I still have cust fail error.
Now I have read your tuto but where I can download cust .img??
Many thanks for your help
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2920167
Thanks, already flashed again recovery , boot and cust
Now forcing update vol+ vol- power
we'll see. Anyway, thanks a lot!
siasegos said:
Now I have read your tuto but where I can download cust .img??
Many thanks for your help
Click to expand...
Click to collapse
Use only original stock cust.img extracted from stock ROM. I always do it in this order:
1. Download mode and flashing stock recovery
2. Recovery mode and wipe (both option)
3. Download mode and flashing cust.img
4. Recovery mode and wipe (both option)
5. If still error go download mode and flash:
cust.img, cache.img, userdata.img, system.img
6. Recovery mode and wipe (both option)
I had many times this error while reverting my B135 after MIUI ROM.
Ziolek67 said:
Use only original stock cust.img extracted from stock ROM. I always do it in this order:
1. Download mode and flashing stock recovery
2. Recovery mode and wipe (both option)
3. Download mode and flashing cust.img
4. Recovery mode and wipe (both option)
5. If still error go download mode and flash:
cust.img, cache.img, userdata.img, system.img
6. Recovery mode and wipe (both option) .
Click to expand...
Click to collapse
Well, after flashing again recovery, boot, cust and forcing an update... I get the same fuc**** error, mm... As you have told me, I guess I do not have the right files for my Vodafone Spain P7-L10
I'm going to look for the right firmware, thanks a lot!!!
==== SEVERAL ATTEMPS LATER AND SOME HOURS LATER... SOLVED!!! ====
I've made svarious attemps with diferent ROMs, B126 and B121, while I was downloading original stock ROM from Huawei.
All of these attemps have failed, even flashing cache, userdata and system
But after downloading original stock rom, as soon as I have flashed cust everything started to work perfectly, wipes... firmware...
So, THAAAAANKS A LOOOOOOOT!
Superwitschi said:
Put your original firmware on dload in sd card, flash original recovery with fastboot or flashify, shut down your phone. Now press power volume- and volume+ ! This will install the original firmware.
Click to expand...
Click to collapse
hi i have the same problem, if i put my 133 d load in my sd card, the phone go however in twrp...
there is a way to install d load or a firm stock from twrp?
I did it!
I've finally did it!
Huawei has released an official downgrade ROM (B603) here (russian site):
http://download-c.huawei.com/download/downloadCenter?downloadId=38601&version=66144&siteCode=ru
You'll also need this official EMUI 3.0 recovery image:
https://mega.co.nz/#!ZZ9QxIiL!Cn4mV2ZG2zzFc956CoWQh4BnBQqyK4rClghlY8CoXQk
As well as fastboot/ADB (platform tools) files here:
https://www.androidfilehost.com/?fid=9390355257214632011
Now here's how you do it.
Copy the dload folder (found in ROM) to the root of your SD Card
Now turn off your phone
While off press and hold Vol Down & Power Key, when screen turns on release Power Key, but keep holding the Vol Down key until you see a white screen (fastboot mode)
Now decompess files from platform tools to a new folder called ADB on your desktop for example
Hold down Shift and right click on ADB folder on your Desktop and choose "run command windows here", a little black window should pop up
Now type:
fastboot devices - this is to check if your phone is correctly detected (if not, then drivers are needed. Just install HiSuite)
fastboot flash recovery stockEMUI3.0RECOVERY.img
fastboot reboot
Your phone will now boot into your current OS. Go to Settings>Updates>Local Update
This will install the downgrade ROM from russian Huawei site (B603)
After this is installed your phone will boot into your current OS again. This time delete UPDATE.APP from dload folder and put your stock firmware in there.
Now repeat the process Settings>Update>Local Update
This time it will finally install that stock KitKat with EMUI 2.3 OMG !!! Finally !!!
God i hope i'll never have to do this again
i rooted the phone, installed twrp and wiped everytginf in the wipe options of the recovery. Yes, that was completwly stupid, i know.
And, of course, now it is stuck on honor boot logo
How can i fix this?
Thank you
Minioide said:
i rooted the phone, installed twrp and wiped everytginf in the wipe options of the recovery. Yes, that was completwly stupid, i know.
And, of course, now it is stuck on honor boot logo
How can i fix this?
Thank you
Click to expand...
Click to collapse
Can you boot into bootloader ?
You may change your recovery to the origine one then flash a new ROM
Minioide said:
i rooted the phone, installed twrp and wiped everytginf in the wipe options of the recovery. Yes, that was completwly stupid, i know.
And, of course, now it is stuck on honor boot logo
How can i fix this?
Thank you
Click to expand...
Click to collapse
What's the status of your phone?
If you can acces fastboot mode it's ok
Minioide said:
i rooted the phone, installed twrp and wiped everytginf in the wipe options of the recovery. Yes, that was completwly stupid, i know.
And, of course, now it is stuck on honor boot logo
How can i fix this?
Thank you
Click to expand...
Click to collapse
If you can enter fastboot mode and download official ROM pack, then you are all good.
Method:
http://forum.xda-developers.com/showpost.php?p=68695798&postcount=2
I need help I have che2-l11 model I was formated my mobile and install twrp.after that I was trying to find Rom but there is no Rom available.but again I was installing stock firmware it's also not installing giving compatibility error I also tried other firmware but non of these firmware working.and currently my mobile is only showing Huawei logo.please help me
kamrangul87 said:
I need help I have che2-l11 model I was formated my mobile and install twrp.after that I was trying to find Rom but there is no Rom available.but again I was installing stock firmware it's also not installing giving compatibility error I also tried other firmware but non of these firmware working.and currently my mobile is only showing Huawei logo.please help me
Click to expand...
Click to collapse
Fastboot method most probably is your only choice now.
Follow this method here:
https://forum.xda-developers.com/showpost.php?p=68695798&postcount=2
Minioide said:
i rooted the phone, installed twrp and wiped everytginf in the wipe options of the recovery. Yes, that was completwly stupid, i know.
And, of course, now it is stuck on honor boot logo
How can i fix this?
Thank you
Click to expand...
Click to collapse
Reboot to recovery wit volume up + power button trigger . and then click on reboot button and then select reboot to bootloader. Their you flash system.img , boot.img and cust.img to their partitions. And then reboot . if u understand what I said I will help u further .
A little bit of help needed...
Hi,
I basically did the same mistake as the other guys, unlocked the bootloader and installed twrp, all fine. Then I ***** up by trying to root fellowing a tuto made for the non-Che2-L11 ones.
I have no problem going into TWRP, the bootloader, or the black screen from huawei (witch looks like.. some kind of second recovery ?)
I managed to download the stock software from huawei ( Honor 4X Firmware (Che2-L11, Android5.1.1, EMUI3.1, C636B360, Malaysia)S.zip ) and also managed to download a version of HuaweiUpdateExtractor ( 0.9.9.5 ).
My problem now, is that if I understood correctly, I should extract the image files from the APP from the firmware zip I downloaded from Huawei.
Unfortunatly, there is no HuaweiUpdateExtractor profile for the honor 4x Che2-L11.
There I may need assistance, or guidance.
Does the profile already exists somewhere ?
How can I create my own, is it not too complex ?
Maybe someone already extracted thoses files and could make them available somewhere ?
Or maybe is there any other way to unbrick my phone ?
************************************
EDIT: Nevermind. I managed to extract the files without profiles. I flashed them 3 but nothing really changed.. So.. I'm kinda stuck. no Idea from here.
************************************
************************************
EDIT (of the edit) : Nevermind the previous nevermind ! It actually worked ! Well, kinda.. Seems my new "stock rom" is quite buggy, strangly, but nevertheless, it work Thanks
************************************
Thanks a lot.
Hello
Hello friend, i also have the same problem. My huawei honor 4x che2-l11 stuck on huawei logo i can not unbrick it. if you succsed so plz attach the file you extract to my email plzzzzz.
email: [email protected]
Thanks.
I know something like this was asked before , but i've got confused and need help with that .
i have Chinese Dual sim version EVA - AL00 and i want to convert it to international dual sim version EVA-L19.
Is that possible ?
I've unlocked bootloader , i also found Software for L19 (all needed files : recovery, boot, userdata, firmware) . i even found Nougat (android 7.0) firwmare ..
So , can i cross flesh them ? and how can i do that?
L19 firmwares
http://huaweidevices.ru/category/huawei-p9-eva-l19 (marshmallow files)
http://www.gizrom.com/android-7-0-emui-5-0-huawei-p9-eva-l19-2/ (nougat files)
*#*#2846579#*#*
And then update from sdcard doesn't work!
use adb/fastboot to flash system, boot, cust and recovery image from L19 marshmallow and next flash with sd card method nougat update
speedster_no1 said:
use adb/fastboot to flash system, boot, cust and recovery image from L19 marshmallow and next flash with sd card method nougat update
Click to expand...
Click to collapse
Anyone has tried this?
and what commands do i need? fastboot flash boot/recovery/ect?
i don't really care about nougat at this time , i just need international rom on this .
I'm almost ok with this rom too , but if there is a chance...
Yes and thats all and after flashing make factory reset
speedster_no1 said:
use adb/fastboot to flash system, boot, cust and recovery image from L19 marshmallow and next flash with sd card method nougat update
Click to expand...
Click to collapse
I want do this too! Can u plz provide more details....! I am neq to huawei and want to remove the chinese things to my P9 EVA-AL00
Thx
Addymore said:
I want do this too! Can u plz provide more details....! I am neq to huawei and want to remove the chinese things to my P9 EVA-AL00
Thx
Click to expand...
Click to collapse
speedster_no1 said:
Yes and thats all and after flashing make factory reset
Click to expand...
Click to collapse
Hmm , you did that before?
i mean in theory i understand it's possible and i did something similar to other brands (like htc m7) years ago , but don't really want to brick this one , because i really like it
anyway what's order ?
1) fastboot flash recovery recovery.img
2)fastboot flash boot boot.img
3) fastboot flash Userdata ?? (don't think i've ever used this one before)
4) fastboot flash system update.app
this one confuses me more then others, because there is only "update.app" and not system.img or something like that ...
Ok so i've bricked it , because fastboot flash system update.app didn't work because of error
"targed data reported max download size ..."
no i'm just waiting for huawei Erecovery to download file
Install Adb/Fastboot, download lastest Marshmallow ROM for L19, download and extract Huawei Extractor, extract update.app with Huawei Extractor(system,boot,recovery,cust image), connect phone to pc with enabled debugging and flash images with commands :
adb reboot bootloader
fastboot flash system system.img
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash cust cust.img
fastboot reboot
After flashing make factory reset.
jkjambo said:
Ok so i've bricked it , because fastboot flash system update.app didn't work because of error
"targed data reported max download size ..."
no i'm just waiting for huawei Erecovery to download file
Click to expand...
Click to collapse
Eeeeehhh! Too bad...!
I thought we were supposed change the oeminfo to L19 with SRK tool in order to flash.....
Addymore said:
Eeeeehhh! Too bad...!
I thought we were supposed change the oeminfo to L19 with SRK tool in order to flash.....
Click to expand...
Click to collapse
Huawei Erecovery reinstalled software with no problem, so there is still a chance..
I was excepting exact that thing .
now our goal is to find system.img or fastboot command to flash update.app , installing boot and recovery was quite easy and had no problem with it after i unlocked bootloader (again)
jkjambo said:
Huawei Erecovery reinstalled software with no problem, so there is still a chance..
I was excepting exact that thing .
now our goal is to find system.img or fastboot command to flash update.app , installing boot and recovery was quite easy and had no problem with it after i unlocked bootloader (again)
Click to expand...
Click to collapse
So what procedures u used to brick it! I want to know it so that I avoid it in the future! Coz i want get rid of these chinese things asap....! Thx
Addymore said:
So what procedures u used to brick it! I want to know it so that I avoid it in the future! Coz i want get rid of these chinese things asap....! Thx
Click to expand...
Click to collapse
I've unlocked bootloader
then connected phone with fastboot mode (power off , then Vol down and plug usb)
and then i flashed boot and recovery which caused soft-bricking (bootloop) , because boot/recovery was for L19 and system still was AL00 .
i just need to flash system.img somehow and it will work ...
jkjambo said:
I've unlocked bootloader
then connected phone with fastboot mode (power off , then Vol down and plug usb)
and then i flashed boot and recovery which caused soft-bricking (bootloop) , because boot/recovery was for L19 and system still was AL00 .
i just need to flash system.img somehow and it will work ...
Click to expand...
Click to collapse
So, u didn't use the SRK Tools.... To change phone properties to match L19
Addymore said:
So, u didn't use the SRK Tools.... To change phone properties to match L19
Click to expand...
Click to collapse
No i didn't .
I'll try that too , but without system.img , or update.app flashing command which i don't know , i'm most likely stuck with this
jkjambo said:
No i didn't .
I'll try that too , but without system.img , or update.app flashing command which i don't know , i'm most likely stuck with this
Click to expand...
Click to collapse
Uuhhh! I thought changing from AL00 to L19 would be easy.....! I m waiting 2 weeks to be able to unlock the BL.... May be afterwards I will try....
Addymore said:
Uuhhh! I thought changing from AL00 to L19 would be easy.....! I m waiting 2 weeks to be able to unlock the BL.... May be afterwards I will try....
Click to expand...
Click to collapse
I wanted to try changing oeminfo and then flashing again , but after flashing firmware with Erecovery , it relocked bootloader and i don't really want to got same processes again , i mean unlocking bootloader will reset device and i'm tired of removing HIXX crap and installing google things (esspecialy contacts)
if there is at least 90% of chance with flashing L19 firmware , then i'll do that , but for now i think i'll stuck with this , at least for some days
Anyone with more info about this stuff?
I did converted AL00C00 to L19C432..... Everything working fine.... Anyone interested.... I can share.... It z quite simple....
Hi, could you share the steps to do the conversion.? Many thanks
My device: PRA-LX1 (Dual SIM version)
Got bricked. I was installing Google APPS on EMUI (Dumb) and it just kept on looping and restarting.
I decided to try the rescue zip and when I successfully restore it, it boots back to TWRP after I reboot to system.
My recoverys: TWRP (installed on recovery2) and Stock EMUI Recovery (installed on recovery)
Bootloader: Unlocked
Fastboot: Command not allowed
Thanks in advance for your reply.
Hello, is the FRP status on fastboot mode LOCKED or UNLOCKED
if it's UNLOCKED then you can unbrick it using fastboot to flash boot.img system.img and do a full wipe of your data partition.
RAR1991 said:
Hello, is the FRP status on fastboot mode LOCKED or UNLOCKED
if it's UNLOCKED then you can unbrick it using fastboot to flash boot.img system.img and do a full wipe of your data partition.
Click to expand...
Click to collapse
I already booted, that's good news!
Now I've got a problem. The famous unbrick guide everyone uses - the firmware is buggy for me.
Fingerprint scanner doesn't work - camera doesn't work and audio doesn't work.
I think this is a problem with the firmware as they are more models of the PRA-LX1?
Btw, how do I find mine?
Thanks
My model is the Europe unlocked dual sim one
NetfariousIntent said:
I already booted, that's good news!
Now I've got a problem. The famous unbrick guide everyone uses - the firmware is buggy for me.
Fingerprint scanner doesn't work - camera doesn't work and audio doesn't work.
I think this is a problem with the firmware as they are more models of the PRA-LX1?
Btw, how do I find mine?
Thanks
My model is the Europe unlocked dual sim one
Click to expand...
Click to collapse
try to download the right version for your phone from firmware finder and flash it using fastboot
RAR1991 said:
try to download the right version for your phone from firmware finder and flash it using fastboot
Click to expand...
Click to collapse
Oh, I think I have picked the right version, now I get the Update.app, how can I flash it now?
I'm such a noob, thank you for your answer.
NetfariousIntent said:
Oh, I think I have picked the right version, now I get the Update.app, how can I flash it now?
I'm such a noob, thank you for your answer.
Click to expand...
Click to collapse
you have to use Huawei update extractor to extract system.img boot.img recovery and recovery2 then flash them with fastboot
PS: Make a backup before trying anything
https://forum.xda-developers.com/showthread.php?t=2433454
thank you
RAR1991 said:
you have to use Huawei update extractor to extract system.img boot.img recovery and recovery2 then flash them with fastboot
PS: Make a backup before trying anything
https://forum.xda-developers.com/showthread.php?t=2433454
Click to expand...
Click to collapse
Only system, boot, recovery and recovery2?
What about modem, vendor, etc...?
Thanks
NetfariousIntent said:
Only system, boot, recovery and recovery2?
What about modem, vendor, etc...?
Thanks
Click to expand...
Click to collapse
in all tutorials that's all what they mentioned and you can't flash vendor.img from fastboot I've tried that but it returns (Command not allowed) I'm trying to convert vendor.img to flashable TWRP backup using Imgtool but I can't figure out how it works yet
RAR1991 said:
in all tutorials that's all what they mentioned and you can't flash vendor.img from fastboot I've tried that but it returns (Command not allowed) I'm trying to convert vendor.img to flashable TWRP backup using Imgtool but I can't figure out how it works yet
Click to expand...
Click to collapse
Hi, I've tried to flash my firmware. Now It bootloops for a while and then restarts and bootloops agian.
I guess I'm very unlucky.
Thanks
NetfariousIntent said:
Hi, I've tried to flash my firmware. Now It bootloops for a while and then restarts and bootloops agian.
I guess I'm very unlucky.
Thanks
Click to expand...
Click to collapse
I'm experiencing the same thing right now with my PRA-LA1 and the only way that I found to make it works is to install a TWRP recovery and root it. But I have a lot of bugs after that I've already created a thread for that if someone can help
[Help] Bugs after rooting PRA-LA1
my honor 4x che1-l04 syddenly stop working when i press the power button it shows honor logo and went off also i never flash any custom recovery also only acessable option is fastboot&rescue mode
my boot loader is locked but i managed to get boot loader key from honor care
after that i unlock boot loader and flash the phone from fastboot mode but it didnt work at all
all files mean recovery,boot,system.img flashed properly no issue but it didnt worked
last version of my phone is marshmallow build no is Che1-L04C675B520
please help me
gilmaan azmi said:
my honor 4x che1-l04 syddenly stop working when i press the power button it shows honor logo and went off also i never flash any custom recovery also only acessable option is fastboot&rescue mode
my boot loader is locked but i managed to get boot loader key from honor care
after that i unlock boot loader and flash the phone from fastboot mode but it didnt work at all
all files mean recovery,boot,system.img flashed properly no issue but it didnt worked
last version of my phone is marshmallow build no is Che1-L04C675B520
please help me
Click to expand...
Click to collapse
Do you have the marshmallow update pacakage(one you downloaded to update the phone to marshmallow) if you have then extract it and place the dload folder inside a memory card and place it in your phone, then while switched off press power+volume up+volume down all at once and wait until your phone vibrates then leave the buttons and let the software do the work. Hope it helps:good:
SumitGupta2442 said:
Do you have the marshmallow update pacakage(one you downloaded to update the phone to marshmallow) if you have then extract it and place the dload folder inside a memory card and place it in your phone, then while switched off press power+volume up+volume down all at once and wait until your phone vibrates then leave the buttons and let the software do the work. Hope it helps:good:
Click to expand...
Click to collapse
i did it brother but it didn't work
only one thing in my phone work is fastboot and rescue mode i also use dc phoenix it also didn't help me at all
dc phoenix show me that it need che1-l04 b126 stock Rom which i didn't find anywhere also on official site
gilmaan azmi said:
i did it brother but it didn't work
only one thing in my phone work is fastboot and rescue mode i also use dc phoenix it also didn't help me at all
dc phoenix show me that it need che1-l04 b126 stock Rom which i didn't find anywhere also on official site
Click to expand...
Click to collapse
Download it from here http://download-c.huawei.com/download/downloadCenter?downloadId=53693&version=167605&siteCode=in. Btw I have no idea what dc phoenix is.
gilmaan azmi said:
i did it brother but it didn't work
only one thing in my phone work is fastboot and rescue mode i also use dc phoenix it also didn't help me at all
dc phoenix show me that it need che1-l04 b126 stock Rom which i didn't find anywhere also on official site
Click to expand...
Click to collapse
If you have unlocked bootloader just flash twrp version for your device and download any MM version Fullrom.zip using firmware finder and flash it through twrp.
Before flashing new rom wipe all partitions from twrp.
miststudent2011 said:
If you have unlocked bootloader just flash twrp version for your device and download any MM version Fullrom.zip using firmware finder and flash it through twrp.
Before flashing new rom wipe all partitions from twrp.
Click to expand...
Click to collapse
i unlocked the boot loader also flashed the twrp recovery
but its not booting in twrp recovery both by power button + volume up and through fastboot command
gilmaan azmi said:
i unlocked the boot loader also flashed the twrp recovery
but its not booting in twrp recovery both by power button + volume up and through fastboot command
Click to expand...
Click to collapse
May be you are using wrong version twrp.
miststudent2011 said:
May be you are using wrong version twrp.
Click to expand...
Click to collapse
i am using TWRP_3.0.3-0_N_cherry its for honor 4x
gilmaan azmi said:
i am using TWRP_3.0.3-0_N_cherry its for honor 4x
Click to expand...
Click to collapse
Then try this process first flash stock recovery and then use dload method and check whether it recovers or not.
miststudent2011 said:
Then try this process first flash stock recovery and then use dload method and check whether it recovers or not.
Click to expand...
Click to collapse
i did it but dosent work
i also use the huawei multi tool it also dosent worked
one thing i noticed that when i flash cust file it shows failed : remote(command not allowed )
also cache is not wiping through fastboot mode it shows the same failed : remote(command not allowed )
i think its a soft brick situation because it boot in fastboot and rescue mode also it show honor logo and went off
i dont know what to do i flashed every single official rom from b161 to b520
and also flashed twrp it also didnt work
please help me
gilmaan azmi said:
i did it but dosent work
i also use the huawei multi tool it also dosent worked
one thing i noticed that when i flash cust file it shows failed : remote(command not allowed )
also cache is not wiping through fastboot mode it shows the same failed : remote(command not allowed )
i think its a soft brick situation because it boot in fastboot and rescue mode also it show honor logo and went off
i dont know what to do i flashed every single official rom from b161 to b520
and also flashed twrp it also didnt work
please help me
Click to expand...
Click to collapse
Just only flash stock recovery not all images and try dload.
You can't flash cust with fastboot and also you can't wipe cache with fastboot
miststudent2011 said:
Just only flash stock recovery not all images and try dload.
You can't flash cust with fastboot and also you can't wipe cache with fastboot
Click to expand...
Click to collapse
i flashed stock recovery but it dosent boot in recovery mode
also it tried dload method but dosent work
what is the reason, that the phone flashed recovery properly but not booting in recovery mode
gilmaan azmi said:
i flashed stock recovery but it dosent boot in recovery mode
also it tried dload method but dosent work
what is the reason, that the phone flashed recovery properly but not booting in recovery mode
Click to expand...
Click to collapse
Are you flashing the ROM version which you were before bricking your device.
What is the android version you were before.
miststudent2011 said:
Are you flashing the ROM version which you were before bricking your device.
What is the android version you were before.
Click to expand...
Click to collapse
yes last version of my phone is marshmallow build no is Che1-L04C675B520
and i am flashing the same but didnt work
miststudent2011 said:
Are you flashing the ROM version which you were before bricking your device.
What is the android version you were before.[/Q
yes last version of my phone is marshmallow build no is Che1-L04C675B520
and i flashed the same but it didnt work
dont know what i am donig wrong
every procedure i followed is correct
Click to expand...
Click to collapse
miststudent2011 said:
Are you flashing the ROM version which you were before bricking your device.
What is the android version you were before.
Click to expand...
Click to collapse
yes last version of my phone is marshmallow build no is Che1-L04C675B520
and i am flashing the same but it didnt work
dont know where i am going wrong
gilmaan azmi said:
yes last version of my phone is marshmallow build no is Che1-L04C675B520
and i am flashing the same but it didnt work
dont know where i am going wrong
Click to expand...
Click to collapse
There was a similar case which I helped him to solve the issue but dont remember the build number that helped him.
Check my previous posts you can find the guide and build number.
miststudent2011 said:
There was a similar case which I helped him to solve the issue but dont remember the build number that helped him.
Check my previous posts you can find the guide and build number.
Click to expand...
Click to collapse
which post sir
same issue
I'm facing exactly same issue, Any help welcome.
gilmaan azmi said:
which post sir
Click to expand...
Click to collapse
did ur issue get fixed? please post updates.