Hi guys!
Hopefully you can assist with my issue. It's the first time i'm having these complications with a device.
So i flashed TWRP (Which worked fine) And then flashed RR from within TWRP (The first install.)
If i have to enter TWRP after a full setup it's going to end up differently.
When i try going into TWRP the next time (Mainly for updates.) My device kinda softbricks?
I just get a black screen with nothing on it after the TWRP splash screen.
*shrugs* i think, and reboot my device, BUT! My rom will now start to setup again, but with a lot of com.android. errors.
This leads me to the only solution of reflashing TWRP + Getting the new RR Update = And starting the process all over again.
At this point i'm pretty frustrated with having to set it all back up every time i glance an update.
What could be wrong? Did i do this correctly?
THANKS!
U must reflash diffrent twrp ithink blue sparks is without issues
psychemisha said:
U must reflash diffrent twrp ithink blue sparks is without issues
Click to expand...
Click to collapse
Do you mean different kernel? It seems noone is having issues with RR and nothing is stated in the "Whats not working" section.
https://forum.xda-developers.com/devdb/project/dl/?id=22806
Flash this
which RR version you installed?
which twrp are you on?
dogmatism said:
which RR version you installed?
which twrp are you on?
Click to expand...
Click to collapse
3.0.3-1 from the TWRP Website. Should i try the above mentioned?
Thank you for the answers so far.
psychemisha said:
https://forum.xda-developers.com/devdb/project/dl/?id=22806
Flash this
Click to expand...
Click to collapse
This did the trick, or atleast for now! Thank you so much. Must have missed something, but wasn't showing.
Related
Ran into a pretty big issue here and I'm not sure where to go. I've downloaded the HDX Mokee version and flashed it with the GAPPS from this thread. All went well until I rebooted and I see is a white box and then it boots into Chinese? A screen with a button came up and naturally I was gonna try to go through the installation so I pushed it and it rebooted my device into TWRP. TWRP went into a boot loop. So, I reboot into the bootloader and reflashed TWRP. I can now access twrp BUT there's NOW a password attached to my device...how the hell? I went to reflash the Mokee zip in bootloader thinking maybe it was a bad flash but i cant as it's a zip and not an img file. HELP lol!
Jon.StatiK said:
Ran into a pretty big issue here and I'm not sure where to go. I've downloaded the HDX Mokee version and flashed it with the GAPPS from this thread. All went well until I rebooted and I see is a white box and then it boots into Chinese? A screen with a button came up and naturally I was gonna try to go through the installation so I pushed it and it rebooted my device into TWRP. TWRP went into a boot loop. So, I reboot into the bootloader and reflashed TWRP. I can now access twrp BUT there's NOW a password attached to my device...how the hell? I went to reflash the Mokee zip in bootloader thinking maybe it was a bad flash but i cant as it's a zip and not an img file. HELP lol!
Click to expand...
Click to collapse
you dont have a password attached to your device? id try like 0000 or 1111.
Jon.StatiK said:
Ran into a pretty big issue here and I'm not sure where to go. I've downloaded the HDX Mokee version and flashed it with the GAPPS from this thread. All went well until I rebooted and I see is a white box and then it boots into Chinese? A screen with a button came up and naturally I was gonna try to go through the installation so I pushed it and it rebooted my device into TWRP. TWRP went into a boot loop. So, I reboot into the bootloader and reflashed TWRP. I can now access twrp BUT there's NOW a password attached to my device...how the hell? I went to reflash the Mokee zip in bootloader thinking maybe it was a bad flash but i cant as it's a zip and not an img file. HELP lol!
Click to expand...
Click to collapse
Start over from scratch. Word to the wise. Avoid the China based roms. There is a reason they are only on China based devices.
zelendel said:
Start over from scratch. Word to the wise. Avoid the China based roms. There is a reason they are only on China based devices.
Click to expand...
Click to collapse
So take it back to stock recovery and rom and then start over from there? Currently I can't flash anything in twrp. It's all bootloader.
Jon.StatiK said:
So take it back to stock recovery and rom and then start over from there? Currently I can't flash anything in twrp. It's all bootloader.
Click to expand...
Click to collapse
flash a factory image, become completely stock again. if you want to, reroot and flash twrp as well. then if you want, try flashing that rom again.
zelendel said:
Start over from scratch. Word to the wise. Avoid the China based roms. There is a reason they are only on China based devices.
Click to expand...
Click to collapse
simms22 said:
flash a factory image, become completely stock again. if you want to, reroot and flash twrp as well. then if you want, try flashing that rom again.
Click to expand...
Click to collapse
Yea, thanks. I went ahead and went back to stock. Everything seems good now.
Thanks.
TWRP 3.0.2
Huawei P8 GRA-L09
Fully working recovery, no encryption support.
"No touch at boot" bug is solved.
Battery percentage.
Compiled with stock B370 kernel
(encryption support is still a WIP)
Since I hope to get it "Official" :angel:, I won't post the customized one here: have a look at @nexolight 's CM13 thread for that one.
No need to say you need an unlocked bootloader.
There's a lot of good guides on how to flash a recovery so I won't repeat here
Download:
https://www.androidfilehost.com/?fid=385035244224399403
MD5: 717f2219fef142a8b4713839186a32f7
Sources:
https://github.com/AD2076/android_device_huawei_grace
Credits:
Team Win for their amazing project
Thank to:
@nexolight (again!) cause she made me start develop in the custom roms universe
anyone could help here?
It was my fault: didn't had the phone for a couple of months and now wanted to update to the latest version of TWRP, ROM and didn't read the threads completely . First time that I'm so stupid.
Bootloader is unlocked, think I have the old bootloader. Had TWRP 2.8.7.0 installed and working. Flashed a 6.0 ROM and ended with bootloop...OK related to the old TWRP. So flashed within 2.8.7 the TWRP 3.0.2 ...
now it is only showing Huawei boot logo....neither fastboot nor TWRP is working anymore with (Vol+ & Power button). It just simply is showing the Huawei logo for some seconds and then restarting.
Any chance to unbrick it?
I'm not expert but if you can't get even into bootloader I think your phone is done.
Hitchi said:
anyone could help here?
It was my fault: didn't had the phone for a couple of months and now wanted to update to the latest version of TWRP, ROM and didn't read the threads completely . First time that I'm so stupid.
Bootloader is unlocked, think I have the old bootloader. Had TWRP 2.8.7.0 installed and working. Flashed a 6.0 ROM and ended with bootloop...OK related to the old TWRP. So flashed within 2.8.7 the TWRP 3.0.2 ...
now it is only showing Huawei boot logo....neither fastboot nor TWRP is working anymore with (Vol+ & Power button). It just simply is showing the Huawei logo for some seconds and then restarting.
Any chance to unbrick it?
Click to expand...
Click to collapse
Try booting with Vol- pressed while connected to PC
Even with Holding VOl- by connecting the PC the phone simply restarts to the Huawei logo and then restarts...
Is there still that bug where I'd have to wait for the screen to go off?
Or what does no touch at boot mean?
No, there isn't. The "notouchatboot" bug is solved..
AD2076 said:
No, there isn't. The "notouchatboot" bug is solved..
Click to expand...
Click to collapse
Great! Nice job
I cannot clean cache. Ext4 formatting takes forever. What am I doing wrong?
potworny said:
I cannot clean cache. Ext4 formatting takes forever. What am I doing wrong?
Click to expand...
Click to collapse
Actually it takes long, very long. Wait with patience
Unfortunately, after some time again, I have no touch at the start ;(
Wysłane z mojego Huawei P8 przy użyciu Tapatalka
motshek said:
Unfortunately, after some time again, I have no touch at the start ;(
Wysłane z mojego Huawei P8 przy użyciu Tapatalka
Click to expand...
Click to collapse
Did you flashed a new kernel? Kept vol+ button pressed while booting into recovery?
Ive loaded only new twrp. a week was ok and now I have to wait until the phone is in sleep recovery and then running touch
motshek said:
Ive loaded only new twrp. a week was ok and now I have to wait until the phone is in sleep recovery and then running touch
Click to expand...
Click to collapse
Sounds strange... I am using it with no issues.
Did you tried flashing twrp again?
Btw I am gonna upload a new build (just removes some unneeded stuff).
Not working for me either. No touch at boot at all but when the screen goes off, I can use it again! Just flashed today.
T1mb3 said:
Not working for me either. No touch at boot at all but when the screen goes off, I can use it again! Just flashed today.
Click to expand...
Click to collapse
Can you give me some more details?
Rom version?
Custom kernel?
Did you had a bugged twrp installed before flashing?
Did you keep Vol + pressed until splash screen at first recovery boot after flashing?
Thank you
AD2076 said:
Can you give me some more details?
Rom version?
Custom kernel?
Did you had a bugged twrp installed before flashing?
Did you keep Vol + pressed until splash screen at first recovery boot after flashing?
Thank you
Click to expand...
Click to collapse
I just updated to b382 with normal OTA. (I flashed the stock recovery as I previously had the older TWRP installed.)
I have never flashed custom kernels on this device.
The earlier TWRP (I quess 2.8, new_twrp) was working normally
Let me know if you need more info!
T1mb3 said:
I just updated to b382 with normal OTA. (I flashed the stock recovery as I previously had the older TWRP installed.)
I have never flashed custom kernels on this device.
The earlier TWRP (I quess 2.8, new_twrp) was working normally
Let me know if you need more info!
Click to expand...
Click to collapse
I have the very same version installed and no touch bug. The recovery is compiled with proper options to avoid it.
I am gonna upload a new build asap. I'll pm you to test it, can I?
Is it possible to use this TWRP to install original Huawei ROMs?
AD2076 said:
I have the very same version installed and no touch bug. The recovery is compiled with proper options to avoid it.
I am gonna upload a new build asap. I'll pm you to test it, can I?
Click to expand...
Click to collapse
Sure!
I was trying to fix my google play "no connection error" but it didn't work so i just reset my phone as a last resort to try and fix this problem. It restarted in recovery mode i thought this was just a procedure and i just hit reboot -> system. it rebooted again into recovery mode i checked if there were any wtuck volume rockers but there aren't any help?
(FYI: one plus 3T: Rooted)
(FYI: link to what i used to try and fix my google play store:https: //forum.xda-developers.com/showthread.php?t=2273994)
What recovery are you running? Stock or TWRP?
bealer said:
What recovery are you running? Stock or TWRP?
Click to expand...
Click to collapse
TWRP
And telling TWRP to boot system just bring you back into TWRP?
Hmm... sounds like you might need to reflash whatever rom you were on.
bealer said:
And telling TWRP to boot system just bring you back into TWRP?
Hmm... sounds like you might need to reflash whatever rom you were on.
Click to expand...
Click to collapse
already did that but still brings me back into TWRP
TrappleV3 said:
already did that but still brings me back into TWRP
Click to expand...
Click to collapse
This happened to me. I installed custom rom then I went into fastboot and installed stock recovery. I would search in this forum for the stock recovery img file. Once installed, I rebooted and it loaded the rom. I had this problem on the latest twrp version. I installed the previous twrp and I am all good now.
Droid-2 said:
This happened to me. I installed custom rom then I went into fastboot and installed stock recovery. I would search in this forum for the stock recovery img file. Once installed, I rebooted and it loaded the rom. I had this problem on the latest twrp version. I installed the previous twrp and I am all good now.
Click to expand...
Click to collapse
you have a link to the file because i can't seem to find it. But thank you anyway for your help.
TrappleV3 said:
you have a link to the file because i can't seem to find it. But thank you anyway for your help.
Click to expand...
Click to collapse
https://forum.xda-developers.com/oneplus-3t/how-to/zip-flashable-firmware-modem-t3509015
mximer said:
https://forum.xda-developers.com/oneplus-3t/how-to/zip-flashable-firmware-modem-t3509015
Click to expand...
Click to collapse
Thank You.
Issue has been resolved. OP is my little cousin who's been messing around a bit too frantically [emoji14]
I restored his device with the unbrick tool by Haris K., all's peachy again. There are still some issues with TWRP for 3T, doesn't run nearly as smooth as on the OPO. It completely failed to restore any working system (both from backup or from reflashing). Sideloading seemingly worked, but rebooted to recovery again, adb push only resulted in errors. Are there any tweaked TWRP releases that can do better?
Cooked with Resurrected bacon!
I am trying to set a sirius clean and up to date, and I flashed 9.9.3.
The thing is, now I can't flash any TWRP, flashing goes as it should, but then I get black screen. The phone wouldn't go to recovery nor the system. Fastboot is the only option, and then I flash 9.9.3 again and try another recovery and so on... I am tired.
Can somebody tell me please, how to get this poor phone to latest eu rom?
Sequence of flashables with version numbers or something?
Thanks
perozu said:
I am trying to set a sirius clean and up to date, and I flashed 9.9.3.
The thing is, now I can't flash any TWRP, flashing goes as it should, but then I get black screen. The phone wouldn't go to recovery nor the system. Fastboot is the only option, and then I flash 9.9.3 again and try another recovery and so on... I am tired.
Can somebody tell me please, how to get this poor phone to latest eu rom?
Sequence of flashables with version numbers or something?
Thanks
Click to expand...
Click to collapse
Are you still in trouble?
perozu said:
I am trying to set a sirius clean and up to date, and I flashed 9.9.3.
The thing is, now I can't flash any TWRP, flashing goes as it should, but then I get black screen. The phone wouldn't go to recovery nor the system. Fastboot is the only option, and then I flash 9.9.3 again and try another recovery and so on... I am tired.
Can somebody tell me please, how to get this poor phone to latest eu rom?
Sequence of flashables with version numbers or something?
Thanks
Click to expand...
Click to collapse
Go to this thread, all is explained.
https://forum.xda-developers.com/mi-8-se/how-to/twrp-guide-one-twrp-tool-mi8se-t4016553
lolo9393 said:
Are you still in trouble?
Click to expand...
Click to collapse
Not anymore.
TacoNikky said:
Go to this thread, all is explained.
https://forum.xda-developers.com/mi-8-se/how-to/twrp-guide-one-twrp-tool-mi8se-t4016553
Click to expand...
Click to collapse
I was actually using this tool and it made all 50 of so of my softbricks a lot faster.
The solution was to fastboot flash 8.10.25 first, and then everything went smoothly.
Hi Friends
I just got the message from TWRP app that there is a new version available. I just installed it through the app and then rebooted the phone.
And now the problem: It boots only into TWRP. I can't boot anymore into OS! I tried to flash with adb the former TWRP version and vbmeta. But it doesn't help. It still boots into TWRP only.
One strange thingt is, when I reboot, it shows me the "relame - Powered by Android" page for afew seconds. Then the page goes away for a second or so and it restarts again, and goes into TWRP.
Please help me. I urgently Need the phone.
Thanks a lot!
https://forum.xda-developers.com/showpost.php?p=82131605&postcount=13
jhha said:
https://forum.xda-developers.com/showpost.php?p=82131605&postcount=13
Click to expand...
Click to collapse
Thank you! Unfortunately this is different problem and CN version.
Has anbody else an idea. Please!
Flash ozip stock, if it does not go up. format data and wipe cache & dalvik-cache. Reboot
zsonnguyenz said:
Flash ozip stock, if it does not go up. format data and wipe cache & dalvik-cache. Reboot
Click to expand...
Click to collapse
Thank you! Formatting data with the way, where you have to confirm with "yes" worked! Only this was necessary and it booted again to OS! Fortunately I could make a data backup with TWRP. But now the big question: I have a system with unlocked bootloader and C24 OS, as well as working FP. How to install now TWRP and Magisk, and how to get back the data?
@exadeci, @jhha
I guess you have experience in this. Would you be kind enough to share?
https://forum.xda-developers.com/showpost.php?p=81509817&postcount=78
https://forum.xda-developers.com/showpost.php?p=82131605&postcount=13
Sir Backe said:
Thank you! Formatting data with the way, where you have to confirm with "yes" worked! Only this was necessary and it booted again to OS! Fortunately I could make a data backup with TWRP. But now the big question: I have a system with unlocked bootloader and C24 OS, as well as working FP. How to install now TWRP and Magisk, and how to get back the data?
@exadeci, @jhha
I guess you have experience in this. Would you be kind enough to share?
https://forum.xda-developers.com/showpost.php?p=81509817&postcount=78
https://forum.xda-developers.com/showpost.php?p=82131605&postcount=13
Click to expand...
Click to collapse
I cannot flash magisk, it always bootloop, except the first time it is unlocked. And I am currently using the lieage rom. Did you flash it?
zsonnguyenz said:
I cannot flash magisk, it always bootloop, except the first time it is unlocked. And I am currently using the lieage rom. Did you flash it?
Click to expand...
Click to collapse
Yes I did. The canary version (see below the list on this page, section "Download"). Before I installed TWRP 3.3.1.13 and vbmeta.img, which I got from here (see section "To flash the TWRP" -> Modified VBMETA.
Hi Friends
After a long night with almost no sleeping I finally got a running system with TWRP 3.3.1.13, modified vbmeta.img, Magisk Canary and OS c24. For the first time in my life I bricked a phone just in various ways, one after the other. 2 horrible days are behind me, and i could only finally get a back a working system thanks to all of you, who supported me either in this thread or in various others where I was reading and actively asking questions, depending on the Problem I just had.
Thanks a lot to all of you. You are a great communitiy!