Hello, i tried multiple version of xposed ,
Every time when i try to install it i receive this error :
-Mounting /system and /vendor read-write
mount: can't find /system in /proc/mounts
!Failed: /system could not be mounted !
I have android 6.0
blu3m3 said:
Hello, i tried multiple version of xposed ,
Every time when i try to install it i receive this error :
-Mounting /system and /vendor read-write
mount: can't find /system in /proc/mounts
!Failed: /system could not be mounted !
I have android 6.0
Click to expand...
Click to collapse
Check this thread, it has a mod that apparently fixes Xposed for those mediatek phones
http://forum.xda-developers.com/ele...v0-5-beta-t3395667/post67247504#post67247504
Sent from my SCH-R220
Definitely you have to use Grorkmod to install Xposed!
Which version of grorkmod should I install if i have bv6000 rooted with gizbeat manual? 1.0? Or 1.1 systemless will be OK?
I just tried installing Magisk v9 with the current Xposed module on a YotaPhone 2 running Android 5.0, but it seems that the module doesn't correctly initialize.
I downloaded and installed the Xposed SDK 21 module in Magisk Manager v2.5. After reboot, however, the module list in Magis Manager was empty (not even phh's Superuser was visible there, which I previously flashed in recovery). However, the Magisk log shows that the Xposed script is executed:
Code:
** Magisk post-fs mode running...
** Magisk post-fs-data mode running...
Preparing modules
Bind mount dummy system
Bind mount module items
post-fs-data: /magisk/xposed/post-fs-data.sh
Enabling systemless hosts file support
Mount: /magisk/.core/hosts
Bind mount system mirror
Mount: /system
Bind mount mirror items
** Magisk late_start service mode running...
service: /magisk/phh/service.sh
phh: Live patching sepolicy
phh: Mounting supath
phh: Starting su daemon
The Xposed Installer now shows on the status screen that Xposed is installed but not active. An Xposed log file in /data/data/de.robv.android.xposed.installer/log doesn't exist. Logcat has no entries for Magisk nor Xposed. Also, the "Enable systemless hosts" checkbox in Magisk Manager isn't active anymore after reboot, even if it clearly is configured that way according to the logs. Is this a bug in Magisk or am I doing something wrong?
i use oneplus 3 with OxygenOs 3.5.5 when i use the rom (stock) and install magisk and enable magisk hide it hides root and safetynet succeed and it unmounts
But when i start from the beginning on the stock rom and install RR on the rom (customrom) and full unroot and reinstall magisk and enable magisk hide and reboot i get this in the log and it doesn't unmount :
HTML:
MagiskHide: starting MagiskHide Daemon
MagiskHide: Unable to watch /magisk/.core/magiskhide/hidelist
any help please to get it to unmount and hide root ?
to know after i installed RR and full unrooted safetynet passed
ahmedsasker said:
i use oneplus 3 with OxygenOs 3.5.5 when i use the rom (stock) and install magisk and enable magisk hide it hides root and safetynet succeed and it unmounts
But when i start from the beginning on the stock rom and install RR on the rom (customrom) and full unroot and reinstall magisk and enable magisk hide and reboot i get this in the log and it doesn't unmount :
HTML:
MagiskHide: starting MagiskHide Daemon
MagiskHide: Unable to watch /magisk/.core/magiskhide/hidelist
any help please to get it to unmount and hide root ?
to know after i installed RR and full unrooted safetynet passed
Click to expand...
Click to collapse
Run the following commands in a terminal emulator:
Code:
su
cd /magisk/.core/magiskhide
sh disable
sh enable
You're probably gonna get an output that the hidelist can't be created because of a permissions issue. That probably means the Magisk image doesn't get mounted properly at boot.
Another user (@gunner007dc) that had this issue fixed it by using a different kernel.
Didgeridoohan said:
Run the following commands in a terminal emulator:
Code:
su
cd /magisk/.core/magiskhide
sh disable
sh enable
You're probably gonna get an output that the hidelist can't be created because of a permissions issue. That probably means the Magisk image doesn't get mounted properly at boot.
Another user (@gunner007dc) that had this issue fixed it by using a different kernel.
Click to expand...
Click to collapse
that is what i get and safetynet doesn't pass still ..
Code:
[email protected]:/magisk/.core/magiskhide # sh disable
MagiskHide: Stopping MagiskHide daemon
disable[27]: can't open /magisk/.core/magiskhide/hidelist: No such file or directory
1|[email protected]:/magisk/.core/magiskhide # sh enable
MagiskHide: Removing dangerous read-only system props
touch: '/magisk/.core/magiskhide/hidelist': Read-only file system
chmod: chmod '/magisk/.core/magiskhide' to 40755: Read-only file system
chmod: chmod 'rm' to 100755: Read-only file system
chmod: chmod 'list' to 100755: Read-only file system
chmod: chmod 'enable' to 100755: Read-only file system
chmod: chmod 'disable' to 100755: Read-only file system
chmod: chmod 'add' to 100755: Read-only file system
grep: /magisk/.core/magiskhide/hidelist: Bad file descriptor/magisk/.core/magiskhide/add[14]: [: 0: unexpected operator/operand
enable[65]: can't open /magisk/.core/magiskhide/hidelist: No such file or directory
MagiskHide: Starting MagiskHide daemon
to know without the magisk and have root removed with the custom rom the safetynet passes so what is wrong ?
if magisk doesn't get mounted properly how could i fix that ?
i tried to install another karnel whick support systemless root and i got bootloop maybe cuz of the custom rom RR so i can't install another karnel while the one i tried the only one i saw that support systemless root
please anyway to make magisk work ? (i tried the two versions under 12.0 too)
ahmedsasker said:
that is what i get and safetynet doesn't pass still ..
Code:
[email protected]:/magisk/.core/magiskhide # sh disable
MagiskHide: Stopping MagiskHide daemon
disable[27]: can't open /magisk/.core/magiskhide/hidelist: No such file or directory
1|[email protected]:/magisk/.core/magiskhide # sh enable
MagiskHide: Removing dangerous read-only system props
touch: '/magisk/.core/magiskhide/hidelist': Read-only file system
chmod: chmod '/magisk/.core/magiskhide' to 40755: Read-only file system
chmod: chmod 'rm' to 100755: Read-only file system
chmod: chmod 'list' to 100755: Read-only file system
chmod: chmod 'enable' to 100755: Read-only file system
chmod: chmod 'disable' to 100755: Read-only file system
chmod: chmod 'add' to 100755: Read-only file system
grep: /magisk/.core/magiskhide/hidelist: Bad file descriptor/magisk/.core/magiskhide/add[14]: [: 0: unexpected operator/operand
enable[65]: can't open /magisk/.core/magiskhide/hidelist: No such file or directory
MagiskHide: Starting MagiskHide daemon
to know without the magisk and have root removed with the custom rom the safetynet passes so what is wrong ?
if magisk doesn't get mounted properly how could i fix that ?
i tried to install another karnel whick support systemless root and i got bootloop maybe cuz of the custom rom RR so i can't install another karnel while the one i tried the only one i saw that support systemless root
please anyway to make magisk work ? (i tried the two versions under 12.0 too)
Click to expand...
Click to collapse
Looks like what for a strange reason /magisk is mounted as read-only. Try mount as rw:
Code:
mount -w -o remount /magisk
Deic said:
Looks like what for a strange reason /magisk is mounted as read-only. Try mount as rw:
Code:
mount -w -o remount /magisk
Click to expand...
Click to collapse
Code:
[email protected]:/ $ su
[email protected]:/ # mount -w -o remount /magisk
[email protected]:/ # cd /magisk/.core/magiskhide
[email protected]:/magisk/.core/magiskhide # she disable
sh: she: not found
127|[email protected]:/magisk/.core/magiskhide # sh disable
MagiskHide: Stopping MagiskHide daemon
disable[27]: can't open /magisk/.core/magiskhide/hidelist: No such file or directory
1|[email protected]:/magisk/.core/magiskhide # sh enable
MagiskHide: Removing dangerous read-only system props
touch: '/magisk/.core/magiskhide/hidelist': Read-only file system
chmod: chmod '/magisk/.core/magiskhide' to 40755: Read-only file system
chmod: chmod 'rm' to 100755: Read-only file system
chmod: chmod 'list' to 100755: Read-only file system
chmod: chmod 'enable' to 100755: Read-only file system
chmod: chmod 'disable' to 100755: Read-only file system
chmod: chmod 'add' to 100755: Read-only file system
grep: /magisk/.core/magiskhide/hidelist: Bad file descriptor/magisk/.core/magiskhide/add[14]: [: 0: unexpected operator/operand
enable[65]: can't open /magisk/.core/magiskhide/hidelist: No such file or directory
MagiskHide: Starting MagiskHide daemon
[email protected]:/magisk/.core/magiskhide #
I still get the same result ...
ahmedsasker said:
I still get the same result ...
Click to expand...
Click to collapse
If you type just:
Code:
su
mount
and look for a line that starts something like:
Code:
/dev/block/loop0 on /magisk
In the parenthesis at the end of the line, the text should start with "rw". Does it?
Didgeridoohan said:
If you type just:
Code:
su
mount
and look for a line that starts something like:
Code:
/dev/block/loop0 on /magisk
In the parenthesis at the end of the line, the text should start with "rw". Does it?
Click to expand...
Click to collapse
No it it does start with ro
Code:
/dev/block/loop0 on /magisk type ext4 (ro,seclabel,noatime,data=ordered)
ahmedsasker said:
No it it does start with ro
Code:
/dev/block/loop0 on /magisk type ext4 (ro,seclabel,noatime,data=ordered)
Click to expand...
Click to collapse
Ok. Next, try:
Code:
mount -o remount,rw /magisk
If that doesn't work, try:
Code:
mount -o remount,rw -t ext4 /dev/block/loop0 /magisk
Didgeridoohan said:
Ok. Next, try:
Code:
mount -o remount,rw /magisk
If that doesn't work, try:
Code:
mount -o remount,rw -t ext4 /dev/block/loop0 /magisk
Click to expand...
Click to collapse
I tried both and it keeps telling me that it is read-only
Code:
[email protected]:/ $ su
[email protected]:/ # mount -o remount,rw /magisk
'/dev/block/loop0' is read-only
ount -o remount,rw -t ext4 /dev/block/loop0 /magisk <
'/dev/block/loop0' is read-only
ahmedsasker said:
I tried both and it keeps telling me that it is read-only
Code:
[email protected]:/ $ su
[email protected]:/ # mount -o remount,rw /magisk
'/dev/block/loop0' is read-only
ount -o remount,rw -t ext4 /dev/block/loop0 /magisk <
'/dev/block/loop0' is read-only
Click to expand...
Click to collapse
Hm... I have no idea...
From your earlier posts I assume you've already uninstalled and reinstalled Magisk a few times, right? Have you tried an unofficial beta snapshot (both Magisk and the Manager)?
I still say you should try a different kernel. I don't know what you mean with "supports systemless root", but I'd try flashing a kernel like Elemental over the one that comes with RR and then install Magisk. Maybe even try installing and running Kernel Auditor, like it says in the link I posted earlier.
Didgeridoohan said:
Hm... I have no idea...
From your earlier posts I assume you've already uninstalled and reinstalled Magisk a few times, right? Have you tried an unofficial beta snapshot (both Magisk and the Manager)?
I still say you should try a different kernel. I don't know what you mean with "supports systemless root", but I'd try flashing a kernel like Elemental over the one that comes with RR and then install Magisk. Maybe even try installing and running Kernel Auditor, like it says in the link I posted earlier.
Click to expand...
Click to collapse
I meant that it was written that it supports systemless root in the XDA forums plus I tried to flash elementalx karnel and went into boot loop ...
I'll try the snapshot one now and thanks alot <3
ahmedsasker said:
I meant that it was written that it supports systemless root in the XDA forums plus I tried to flash elementalx karnel and went into boot loop ... How can I uninstall the elementalx karnel to try another one without reflashing the whole rom ?
I'll try the snapshot one now and thanks alot <3
Click to expand...
Click to collapse
Dirty flash the ROM or open up the ROM zip, extract the boot.img and flash that in TWRP.
Didgeridoohan said:
Dirty flash the ROM or open up the ROM zip, extract the boot.img and flash that in TWRP.
Click to expand...
Click to collapse
OMG thanks alot it works well now and passes with the snapshot version <3
thanks again x3
Didgeridoohan said:
Dirty flash the ROM or open up the ROM zip, extract the boot.img and flash that in TWRP.
Click to expand...
Click to collapse
please do you know compatible version of systemless xposed with snapshot magisk ! cuz latest v87 after I flash it, closed installer says that there's not framework installed but normal official one works
systemless xposed v87 was working fine on magisk v12
i installed the official one now and it is working very well
what is the difference between systemless xposed and the normal one ? (cuz both got caught by safety net)
ahmedsasker said:
please do you know compatible version of systemless xposed with snapshot magisk ! cuz latest v87 after I flash it, closed installer says that there's not framework installed but normal official one works
systemless xposed v87 was working fine on magisk v12
i installed the official one now and it is working very well
what is the difference between systemless xposed and the normal one ? (cuz both got caught by safety net)
Click to expand...
Click to collapse
It's very likely the Xposed Magisk module needs to be updated to work with v13... I don't use Xposed though, so I wouldn't know.
The difference between system and systemless xposed is that one is installed into system and the other one is systemless. :laugh: Seriously... That's the difference. They'll both trigger SafetyNet. Systemlessness is not about passing SafetyNet.
Didgeridoohan said:
Run the following commands in a terminal emulator:
Code:
su
cd /magisk/.core/magiskhide
sh disable
sh enable
You're probably gonna get an output that the hidelist can't be created because of a permissions issue. That probably means the Magisk image doesn't get mounted properly at boot.
Another user (@gunner007dc) that had this issue fixed it by using a different kernel.
Click to expand...
Click to collapse
In my device, no file in /magisk/...why?:crying::crying:
Hooxp17 said:
In my device, no file in /magisk/...why?:crying::crying:
Click to expand...
Click to collapse
No idea. I can't see your device and I can't read your mind... Meaning: you've given very few details.
I'm gonna make a guess though: are you taking about the ".core" folder? It's a hidden folder, so if your file explorer isn't set to see hidden files and folders you won't see it.
If this is not your issue, give more details.
Didgeridoohan said:
Dirty flash the ROM or open up the ROM zip, extract the boot.img and flash that in TWRP.
Click to expand...
Click to collapse
Which ROM? How to Dirty Flash? I have G5 Plus
brandonsisco said:
Which ROM? How to Dirty Flash? I have G5 Plus
Click to expand...
Click to collapse
Uhm... That was a specific advice for a specific issue...
What's your issue?
Didgeridoohan said:
Run the following commands in a terminal emulator:
Code:
su
cd /magisk/.core/magiskhide
sh disable
sh enable
You're probably gonna get an output that the hidelist can't be created because of a permissions issue. That probably means the Magisk image doesn't get mounted properly at boot.
Another user (@gunner007dc) that had this issue fixed it by using a different kernel.
Click to expand...
Click to collapse
hello, i have a problem with magisk, so i found your post. but in the terminal emulator can't see this file.. can you help me?
Hi everyone,
in pixel 2, I can get super su for adb shell, and can remount the system, /vendor partition
mount -o rw,remount -t auto /vendor
mount -o rw,remount -t auto /system
but in pixel 3 with magisk 18 or 19, I always fail to remount /vendor
blueline:/ # mount -o rw,remount -t auto /vendor
mount: '/dev/block/dm-1'->'/vendor': I/O error
I need to modify some file under/vendor/etc
I've disable Preserve AVB 2.0/dm-verity and Preserve forceencryption in advanced Settings from Magisk, unfortunately do no avail,
any idea is appreciated
misslebulletttttt said:
Hi everyone,
in pixel 2, I can get super su for adb shell, and can remount the system, /vendor partition
mount -o rw,remount -t auto /vendor
mount -o rw,remount -t auto /system
but in pixel 3 with magisk 18 or 19, I always fail to remount /vendor
blueline:/ # mount -o rw,remount -t auto /vendor
mount: '/dev/block/dm-1'->'/vendor': I/O error
I need to modify some file under/vendor/etc
I've disable Preserve AVB 2.0/dm-verity and Preserve forceencryption in advanced Settings from Magisk, unfortunately do no avail,
any idea is appreciated
Click to expand...
Click to collapse
This isn't working for me either. Tried with TWRP and regular module install. My changes to files on /vendor/etc just get overwritten. On magisk 18 and Pie.
If there's a Magisk mask active (modules magic mounting files) you might have issues if you want to do something other than systemless modifications.
The real partitions are found in /sbin/.magisk/mirror, you can try editing that. Or, editing in recovery (TWRP) should always work, since Magisk isn't active then.
loserinru said:
This isn't working for me either. Tried with TWRP and regular module install. My changes to files on /vendor/etc just get overwritten. On magisk 18 and Pie.
Click to expand...
Click to collapse
so do I, want to move some file to /vendor/etc, adb push definitely not working, so copy to /sdcard,
mount -o rw,remount -t auto /vendor
cp /sdcard/XXX /vendor,
however
mount -o rw,remount -t auto /vendor
always show mount: '/dev/block/dm-1'->'/vendor': I/O error,
tried with the movement in TWRP, but after booting into system, it's gone,
any other method to overcome ?
Didgeridoohan said:
If there's a Magisk mask active (modules magic mounting files) you might have issues if you want to do something other than systemless modifications.
The real partitions are found in /sbin/.magisk/mirror, you can try editing that. Or, editing in recovery (TWRP) should always work, since Magisk isn't active then.
Click to expand...
Click to collapse
Hi, I've copied the new file to sdcard, boot into TWRP, in TWRP do the file movement from sdcard to /vendor/etc with success, however, every time after booting into system, the modification is gone, same as the guy replied in the second thread,
any method for the movement is pretty appreciated
Magisk is not active in TWRP, so there's something else going on... Check /sbin/.magisk/mirror/vendor/etc if the modification is there, and take a look at the Magisk log (you'll need the Canary debug build for more verbose logging) if anything shows there.
Didgeridoohan said:
Magisk is not active in TWRP, so there's something else going on... Check /sbin/.magisk/mirror/vendor/etc if the modification is there, and take a look at the Magisk log (you'll need the Canary debug build for more verbose logging) if anything shows there.
Click to expand...
Click to collapse
I solved this by modifying the install script of Magisk,
if [ -z $KEEPVERITY ]; then
if $SYSTEM_ROOT; then
- KEEPVERITY=true
+ KEEPVERITY=false
ui_print "- System-as-root, keep dm/avb-verity"
else
KEEPVERITY=false
fi
fi
and install Magisk again in TWRP
this can help to disable dm-verity completely, now I can remount /vendor without I/O error
Didgeridoohan said:
If there's a Magisk mask active (modules magic mounting files) you might have issues if you want to do something other than systemless modifications.
The real partitions are found in /sbin/.magisk/mirror, you can try editing that. Or, editing in recovery (TWRP) should always work, since Magisk isn't active then.
Click to expand...
Click to collapse
Riiii I always do system edits threw twrp instead of Un mounting modules like viper and air audio plug-in and do systemless system edits threw the OS
Sent from my SM-J327P using Tapatalk