Just wondering how much longer AT&T will have to wait. So far I love the new ui and performance improvements.
Sweet! Downloading now!
Knowing ATT it will be a while before they release it. The real question is when will the U nougat come out!?
Sent from my SAMSUNG-SM-G935A using XDA-Developers Legacy app
Would be interesting to know which files are different between the released T-Mobile and leaked AT&T to get a sense of whether there are more system files being shaken out in QA or whether it's the AT&T bloatware mucking things up in getting the release out.
stoobie-doo said:
Would be interesting to know which files are different between the released T-Mobile and leaked AT&T to get a sense of whether there are more system files being shaken out in QA or whether it's the AT&T bloatware mucking things up in getting the release out.
Click to expand...
Click to collapse
Almost done downloading it, I will upload a link in a little bit here.
Sent from my SAMSUNG-SM-G935A using XDA-Developers Legacy app
How's it running?
If anybody can get this to flash over the unreleased AT&T release, I need to know.
raduque said:
If anybody can get this to flash over the unreleased AT&T release, I need to know.
Click to expand...
Click to collapse
I'm going to try this evening with odin and use the t-mobile home csc, we'll see if it saves all my data or not. I'll keep ya posted.
Just flashed the T-Mobile N modem and that flashed and phone boots
Quickvic30 said:
I'm going to try this evening with odin and use the t-mobile home csc, we'll see if it saves all my data or not. I'll keep ya posted.
Just flashed the T-Mobile N modem and that flashed and phone boots
Click to expand...
Click to collapse
What version of ODIN did you use, and what FW were you on before? I was on the unreleased AT&T 7.0 and I can't seem to flash anything at all now except for AT&T FWs.
I have tried Tmobile APK1, Verizon PI3 and U PL4. Odin versions below 3.12.3 cause the phone to say "Odin Protocol Error" and 3.12.3 says <ID:0/007> FAIL! SHA256 is invalid on every FW.
Quickvic30 said:
I'm going to try this evening with odin and use the t-mobile home csc, we'll see if it saves all my data or not. I'll keep ya posted.
Just flashed the T-Mobile N modem and that flashed and phone boots
Click to expand...
Click to collapse
Looks Like AT&T has Nougat Live OTA Official my second S7 Edge !
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
raduque said:
What version of ODIN did you use, and what FW were you on before? I was on the unreleased AT&T 7.0 and I can't seem to flash anything at all now except for AT&T FWs.
I have tried Tmobile APK1, Verizon PI3 and U PL4. Odin versions below 3.12.3 cause the phone to say "Odin Protocol Error" and 3.12.3 says <ID:0/007> FAIL! SHA256 is invalid on every FW.
Click to expand...
Click to collapse
I'm on the beta BQA6 and used prince Odin 3.12.3
Sent from my SAMSUNG-SM-G935A using XDA-Developers Legacy app
Venom0642 said:
Looks Like AT&T has Nougat Live OTA Official my second S7 Edge !
Click to expand...
Click to collapse
Oh yeah!!! [emoji12]
Sent from my SAMSUNG-SM-G935A using XDA-Developers Legacy app
Venom0642 said:
Looks Like AT&T has Nougat Live OTA Official my second S7 Edge !
Click to expand...
Click to collapse
And now two out of four carriers have officially dropped 7.0. Where's Verizon and Sprint? Nobody knows.
I'll wait for the U update for my daily driver.
raduque said:
And now two out of four carriers have officially dropped 7.0. Where's Verizon and Sprint? Nobody knows.
I'll wait for the U update for my daily driver.
Click to expand...
Click to collapse
From what i read earlier (forget where the article was from) the U firmware could be quite awhile.
muppetmaster916 said:
From what i read earlier (forget where the article was from) the U firmware could be quite awhile.
Click to expand...
Click to collapse
Yeah, I don't mind waiting though. It's worth it to have an un-carrier-molested phone. I'm just doing these FW flashes on my spare phone to play around with it.
raduque said:
Yeah, I don't mind waiting though. It's worth it to have an un-carrier-molested phone. I'm just doing these FW flashes on my spare phone to play around with it.
Click to expand...
Click to collapse
I just want the drop down data toggle from the U firmware lol. Miss that thing more than root.
Now we just need someone to post the update for those of us not currently on an AT&T build
disturbd1 said:
Now we just need someone to post the update for those of us not currently on an AT&T build
Click to expand...
Click to collapse
Yes, and build is same as we had already BQA6.
Clicking from Edge of Galaxy.
Alright, I Flashed the T-Mobile nougat with odin 3.11.2 and it failed when I tried using the HOME CSC flashing over BQA6 ATT. So I just booted into recovery, wiped cache, facory reset and then flashed the TMB nougat with the regular CSC and all went well, running smooth and guess what!? Mobile hotspot works on ATT unlimited data plan!!!!! WOOOOT!
Venom0642 said:
Looks Like AT&T has Nougat Live OTA Official my second S7 Edge !
Click to expand...
Click to collapse
We have to go back down to PK1 to get this official OTA from AT&T right?
sakumaxp said:
We have to go back down to PK1 to get this official OTA from AT&T right?
Click to expand...
Click to collapse
Correct.
Related
Just got my update finally!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Please share ota file, I'm dying ATM.
zhable said:
Please share ota file, I'm dying ATM.
Click to expand...
Click to collapse
If i knew how i totally would stick it on megaupload.
know a guide?
Guys i love the update! Phone is faster and looks nice
Sent from my SM-N910U using Tapatalk
Update is awesome guys
Fxxk yeah, finally!
Downloading right now
I've got it too. For some reason the drop down menu has changed to an uglier shade of yellow green, the colour of frog excrement.. Otherwise don't really notice significant changes. Samsung has layered the ui so much that it just looks like.. Well Samsung. Not very evident it's lollipop tbh
If anyone is manually flashing the ROM using ODIN, check your CSC beforehand. There are two different regions of NZ that Samsung released the update for, which are TNZ and NZC. If you flash the wrong CSC version, your CSC will turn to an unknown state meaning that you won't be receiving OTA updates in the future. I have the Taiwan version (BRI) and I flashed the NZC version and now the CSC state is unknown. It's still Lollipop, but you will have to manually flash every updates released from this point forward.
LTE-X said:
If anyone is manually flashing the ROM using ODIN, check your CSC beforehand. There are two different regions of NZ that Samsung released the update for, which are TNZ and NZC. If you flash the wrong CSC version, your CSC will turn to an unknown state meaning that you won't be receiving OTA updates in the future. I have the Taiwan version (BRI) and I flashed the NZC version and now the CSC state is unknown. It's still Lollipop, but you will have to manually flash every updates released from this point forward.
Click to expand...
Click to collapse
NVM mine is still unknown after a reset
tomqin said:
NVM mine is still unknown after a reset
Click to expand...
Click to collapse
It must be how Samsung programmed its CSC for the ROM. When the official ROM comes out for your region, you can restore using Kies 3 or Smart Switch. Then, you will get OTA updates as usual like you did before.
LTE-X said:
If anyone is manually flashing the ROM using ODIN, check your CSC beforehand. There are two different regions of NZ that Samsung released the update for, which are TNZ and NZC. If you flash the wrong CSC version, your CSC will turn to an unknown state meaning that you won't be receiving OTA updates in the future. I have the Taiwan version (BRI) and I flashed the NZC version and now the CSC state is unknown. It's still Lollipop, but you will have to manually flash every updates released from this point forward.
Click to expand...
Click to collapse
weird, I flashed NZC (formerly had BRI) and mine was still BRI. I did some benchmarking and I guess it was a little "dirty" and was getting really low results. So I just went into recovery wiped data and cache. Now my device claims to be NZC and works flawlessly. Best of luck
http://forum.xda-developers.com/showpost.php?p=60294513&postcount=1231
Can update samsung note 7000 to lollipop [emoji27]
Has anyone trying rooting using cf auto root after this update - I did and it failed to root my device
Unresponsive touchscreen after Lollipop
Hi there guys,
After updating my Galaxy Note 4 n910U to Lollipop via OTA, the touchscreen just became unresponsive. The update went on smoothly and my phone booted fine and it's on Lollipop now. I can navigate normally using the screen through the S-Pen but it just would not respond to touch. Very frustrating. New device, been waiting for this update and this happens. Please help.
Thanks!
tomqin said:
NVM mine is still unknown after a reset
Click to expand...
Click to collapse
You could try factory reset in recovery followed by a cache wipe and a repeat factory reset. Flash the NZC firmware again. After flashing again go to recovery and do a factory reset followed by a cache wipe and another factory reset. Boot and check if you are able to still see the csc in unknown status.
thx for the tip,
I'll probably wait for the HK version of Lollipop and then go back to the original csc
where is the link?
Nice information but where is the link???!!!
lumao said:
Nice information but where is the link???!!!
Click to expand...
Click to collapse
Bro, you realise you responded to an old old thread? 5.1.1 is next U variant update, not yet arrived
Just went to OTA in my DBT Note 4 N910F and boom! I believe this it. Waiting for it to update.
Will keep you guys updated.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
via GALAXY Note 4 +128GB MicroSDXC using Tapatalk
what country. ? let me know your previous build number/
benzas said:
what country. ? let me know your previous build number/
Click to expand...
Click to collapse
Dbt is german
Sent from my unknown using XDA-Developers mobile app
Finally !!
yes, it is indeed MM for the 910F... FINALLY.
demzzy said:
yes, it is indeed MM for the 910F... FINALLY.
Click to expand...
Click to collapse
Without any change...
I confirm it as well.
KeTuRr74 said:
Without any change...
Click to expand...
Click to collapse
what do you mean @KeTuRr74?
The phone is VERY smooth now much smoother than Android 5.1.1
The changes are subtle but welcome, its great to have App Permissions and new SPen Menu and updated UI icons. Phone also seems to run a tad cooler.
Some screenshots...
via GALAXY Note 4 +128GB MicroSDXC using Tapatalk
Nothing for me yet, N4 BTU UK
Ian
This 6.0.1 update has truly fixed whatever 5 did to our Note 4s, its super smooth and fast.
via GALAXY Note 4 +128GB MicroSDXC using Tapatalk
Would anyone be able to tell me how can I get the downloadable firmware?
Waiting for an odin file too. Flashed latest german rom with odin but no OTA for me.
Verstuurd vanaf mijn SM-N910F met Tapatalk
POLO_i780 said:
Just went to OTA in my DBT Note 4 N910F and boom! I believe this it. Waiting for it to update.
Will keep you guys updated.
via GALAXY Note 4 +128GB MicroSDXC using Tapatalk
Click to expand...
Click to collapse
Did you made a factory reset? Or just the upgrade?
Another question, I de-activated some apps not useful for me, is it safe to upgrade without re-activating them before flashing?
Thanks,
Nicola
Sent from my SM-N910F using XDA-Developers mobile app
@POLO_i780
I said this because there was nothing changed looking to the Lollipop firmware.
They have only added some thingqs from the Note 5 thats all.
No themed UI, same apps, same Touchwizz Launcher etc...
I prefer my N910G port wich have no difference with that OTA but themed like Note 5.
piumach said:
Did you made a factory reset? Or just the upgrade?
Another question, I de-activated some apps not useful for me, is it safe to upgrade without re-activating them before flashing?
Thanks,
Nicola
Sent from my SM-N910F using XDA-Developers mobile app
Click to expand...
Click to collapse
Nope, didn't factory reset, just upgraded.
Yep, its safe, I have lots of disabled apps and upgrade went smoothly.
via GALAXY Note 4 +128GB MicroSDXC using Tapatalk
DBT
Downloadind DBT, we will see what this upgrade will bring to us, so that they were slow to leave
for sure I will be disappointed. but better than nothing
Can anyone provide us with a download link to the MM DBT Firmware? Its still not uploaded to Sammobile, also Im downloading the 5.1.1 DBT firmware to flash it and then OTA update my phone, but sammobile links are killing me, if anyone has the latest dbt firmware (Lolipop or MM) please uploaded it to sites like Mega upload etc... Thanks
tomashaker4e said:
Can anyone provide us with a download link to the MM DBT Firmware? Its still not uploaded to Sammobile, also Im downloading the 5.1.1 DBT firmware to flash it and then OTA update my phone, but sammobile links are killing me, if anyone has the latest dbt firmware (Lolipop or MM) please uploaded it to sites like Mega upload etc... Thanks
Click to expand...
Click to collapse
Im trying to grab it but no one has rooted her phone so we need to wait.
For downloading firmwre i suggest you SamFirm tools from an xda dev, you have no downloading speed limit and it work good.
KeTuRr74 said:
Im trying to grab it but no one has rooted her phone so we need to wait.
For downloading firmwre i suggest you SamFirm tools from an xda dev, you have no downloading speed limit and it work good.
Click to expand...
Click to collapse
Well, all I have with SamFirm is
Checking firmware for SM-N910F/DBT/N910FXXS1DPC2/N910FOXA1DPB5/N910FXXU1DPB1
Error: Could not send BinaryInform. Status code 200/400
Request was invalid. Are you sure the input data is correct?
Click to expand...
Click to collapse
Maybe i'm doing something wrong...
Has anyone received an update of android one ui on the unlocked variant of the note
Which varient you are referring to? For which country?
Unlocked us variant SM-N960U1
We'll more than likely be last to get it. Yes it's unlocked but it still needs be "certified" by each carrier to work on their network.
All the carriers have to certify it? Cause I don't know if the US unlocked version works on Sprint.
Sent from my SM-N960U1 using Tapatalk
barondebxl said:
All the carriers have to certify it? Cause I don't know if the US unlocked version works on Sprint.
Click to expand...
Click to collapse
Carrier branded and US unlocked have all the same hardware, the only difference is the software.
sacnotsack said:
We'll more than likely be last to get it. Yes it's unlocked but it still needs be "certified" by each carrier to work on their network.
Click to expand...
Click to collapse
I don't think the carriers have to certify the update. The unlocked version should only have to be certified by Samsung and then sent OTA.
The unlocked versions are typically late to the upgrade party regardless of the reason unfortunately.
"Unlike other OEMs, Samsung certifies unlocked updates on all four carriers, which leads to delays."
https://www.androidpolice.com/2019/01/31/samsung-galaxy-note-9-on-att-gets-its-pie-update/
Finally found where I read it at.
sacnotsack said:
"Unlike other OEMs, Samsung certifies unlocked updates on all four carriers, which leads to delays."
https://www.androidpolice.com/2019/01/31/samsung-galaxy-note-9-on-att-gets-its-pie-update/
Finally found where I read it at.
Click to expand...
Click to collapse
But there's no mention there of what, if anything, is the source of that information.
Also, it doesn't say that the carriers certify the updates. It says Samsung certifies the updates on each carrier.
Yeah looks like I got it glip flopped on the certification.
I'm not saying I'm happy or agree that it should take so long for unlocked versions to get updates, but if there are more certifications required, then it makes sense that it would take longer.
I assume that when Samsung goes to get a device certified on a carrier, that carrier still has to give the green light and say it's good to go.
Wow, this is so annoying, evone is happy with his one ui.
My phone Sm-960U1 is stuck on ARL1 December patch. Will it ever upgrade or do I have to do it manually?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SM-N960U1 using Tapatalk
Bublik2002 said:
My phone Sm-960U1 is stuck on ARL1 December patch. Will it ever upgrade or do I have to do it manually?View attachment 4700900
Sent from my SM-N960U1 using Tapatalk
Click to expand...
Click to collapse
You aren't stuck on anything. ARL1 is the most recent build available for the U1.
Mr. Orange 645 said:
You aren't stuck on anything. ARL1 is the most recent build available for the U1.
Click to expand...
Click to collapse
So I'll be able to upgrade to pie eventually OTA?
Sent from my SM-N960U1 using Tapatalk
Mr. Orange 645 said:
You aren't stuck on anything. ARL1 is the most recent build available for the U1.
Click to expand...
Click to collapse
Can you gimme a link to get the latest unlocked rom? Please.
I am receiving the pie update. I am on sm-n960w unlocked device purchased from Samsung. Using on Koodo network in canada.
Update: Phone booted in safe mod after update. asking for factory data reset!!
Bublik2002 said:
So I'll be able to upgrade to pie eventually OTA?
Sent from my SM-N960U1 using Tapatalk
Click to expand...
Click to collapse
Of course. Why wouldn't you be able to? You're on the latest official build for the U1. When an update is released, it will get pushed to you via OTA. Just like all the other monthly updates you've received.
rhaspody said:
Can you gimme a link to get the latest unlocked rom? Please.
Click to expand...
Click to collapse
I don't have a link, but you can download it with the SamFirm tool. That's the fastest and most reliable way to download firmwares.
For Sprint carrier, the unlocked version is supposed to start roll out Feb. 21. This is what was told to me when i contacted support asking why carrier note 9 got the update but mine has not.
kennethbb said:
For Sprint carrier, the unlocked version is supposed to start roll out Feb. 21. This is what was told to me when i contacted support asking why carrier note 9 got the update but mine has not.
Click to expand...
Click to collapse
The U1 unlocked modules will all get the update at the same time. And since it's pushed by Samsung and not the carriers, I'm not sure I would trust Sprint's word on that.
I've already read a bunch of forums on this and finally got into the ims settings but they all say "false" Is there any way with or without root to enable the settings. If I do have to root it, what do I do after to activate these features? The phone has the T-Mobile boot animation and receives T-Mobile software updates. I'm using it on MetroPCS. If I switched to T-Mobile would the features work then? My last phone was a locked T-Mobile S8 and that worked fine on MetroPCS with all the features. Thank you.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
https://imgur.com/a/1d9r4Wo
Bump
Mc Binsk said:
Bump
Click to expand...
Click to collapse
When using T-mobile firmware with tmo service everything will say true. If you look in software info it should say tmb/tmb/tmb.
Ace42 said:
When using T-mobile firmware with tmo service everything will say true. If you look in software info it should say tmb/tmb/tmb.
Click to expand...
Click to collapse
It says tmb/xaa/att. What does that mean?
Mc Binsk said:
It says tmb/xaa/att. What does that mean?
Click to expand...
Click to collapse
I'm guessing the phone started on AT&T firmware, and was not correctly moved to TMB. XAA means U1 fw (att + tmb are U). You're using Frankenstein software, suppose that's part of the problem. If you flash the Tmobile fw with your SIM inserted it should fix that.
..
Ace42 said:
I'm guessing the phone started on AT&T firmware, and was not correctly moved to TMB. XAA means U1 fw (att + tmb are U). You're using Frankenstein software, suppose that's part of the problem. If you flash the Tmobile fw with your SIM inserted it should fix that.
Click to expand...
Click to collapse
According to this guide would I need to do the carrier change first? Or could I to straight to flashing the TMobile firmware?
https://forum.xda-developers.com/galaxy-note-8/how-to/guide-sm-n950u-u1-t3685884
Ace42 said:
I'm guessing the phone started on AT&T firmware, and was not correctly moved to TMB. XAA means U1 fw (att + tmb are U). You're using Frankenstein software, suppose that's part of the problem. If you flash the Tmobile fw with your SIM inserted it should fix that.
Click to expand...
Click to collapse
Also I'm my baseband version is N950USQS5CRK1. Will it allow me to flash the TMobile firmware that matches that version? Thank you for your help.
Mc Binsk said:
It says tmb/xaa/att. What does that mean?
Click to expand...
Click to collapse
This was originally an ATT device. That's what the 3rd CSC Code tells you. It can't be changed, but it also doesn't affect anything.
My guess is someone flashed this to the N960U1 firmware, and then just flashed the T-Mobile CSC file. Probably to get back RCS texting or Video calling. But it left you with Frankenstein firmware.
Just flash a full T-Mobile firmware through ODIN. Use the CSC_OYN file, not the HOME_CSC file. Flash all five files. It will force a factory reset, but should get you back on the full T-Mobile firmware.
If it goes right, you'll end up with TMB/TMB/ATT. which is what I also have.
Mr. Orange 645 said:
This was originally an ATT device. That's what the 3rd CSC Code tells you. It can't be changed, but it also doesn't affect anything.
My guess is someone flashed this to the N960U1 firmware, and then just flashed the T-Mobile CSC file. Probably to get back RCS texting or Video calling. But it left you with Frankenstein firmware.
Just flash a full T-Mobile firmware through ODIN. Use the CSC_OYN file, not the HOME_CSC file. Flash all five files. It will force a factory reset, but should get you back on the full T-Mobile firmware.
If it goes right, you'll end up with TMB/TMB/ATT. which is what I also have.
Click to expand...
Click to collapse
Thanks a lot! For some reason it wasn't working right on MetroPCS but I put a TMobile sim and now all the features work and it says tmb/tmb/att. So I guess I don't have to flash the firmware
Mc Binsk said:
Thanks a lot! For some reason it wasn't working right on MetroPCS but I put a TMobile sim and now all the features work and it says tmb/tmb/att. So I guess I don't have to flash the firmware
Click to expand...
Click to collapse
Glad you got it figured out!
Hey guys, does anyone have a copy of this file that they can share? I flashed to the SM-N960U1 pie update last night and lost VoLTE and WiFi calling on Verizon. I'm a little rusty with Samsung's (been a few years) so I guess I made a rookie mistake.
If I'm not mistaken, I really only need the CSC file but this is the only place I've been able to find the software that references Verizon directly:
https://www.sammobile.com/firmwares/galaxy-note9/SM-N960U1/VZW/download/N960U1UEU1CSB3/260802/
I'm trying to download it now but so far it's been running over and hour and its stuck at only 31.58 MB of nearly 4GB.
If someone has this file and could share it, I'd much appreciate. Or if I'm downloading the wrong file, please point me in the right direction. I need Verizon fully working on Android 9 with the SM-N960U1 firmware. Thanks!
Sent from my SM-N960U1 using Tapatalk
Upon closer review, I think I'm already on this software. So I'm not really sure what I need to flash? I can I flash a CSC from a SM-N960U (without the 1)?
View attachment 4724933
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SM-N960U1 using Tapatalk
This picture isn't showing up from the last post for some reason.
Sent from my SM-N960U1 using Tapatalk
try to use samfirm tool 0.3.6 to dl it. no idea if the version of the firmware you want would be available but just flashing the home_csc.md5 of any recent pie version of a U firmware shouldn't matter.
also since you want a csc that is on a different firmware( ure on U1 but ure desired csc is U) phone model, ull have to probably flash it using the patched B version of odin 3.13.x
bober10113 said:
try to use samfirm tool 0.3.6 to dl it. no idea if the version of the firmware you want would be available but just flashing the home_csc.md5 of any recent pie version of a U firmware shouldn't matter.
also since you want a csc that is on a different firmware( ure on U1 but ure desired csc is U) phone model, ull have to probably flash it using the patched B version of odin 3.13.x[/QUOTeE]
Thanks but I can't get that tool to work. The original thread says to use updato now, which doesn't have any Verizon specific files (unless they're calling it something else).
Click to expand...
Click to collapse
I was finally able to download the firmware from sammobile and it turns out that it didn't help me at all. It seemingly made no change to my software.
Since it's nearly midnight on Sunday and I have to work tomorrow (I get no signal at work - wifi only) I decided to flash a CSC from an old 8.1 Verizon odin file I had saved to my PC. Wifi calling is back and none of the Verizon bloatware!! I'm glad that worked or I'd have been switching to the backup phone.
joshw0000 said:
I was finally able to download the firmware from sammobile and it turns out that it didn't help me at all. It seemingly made no change to my software.
Since it's nearly midnight on Sunday and I have to work tomorrow (I get no signal at work - wifi only) I decided to flash a CSC from an old 8.1 Verizon odin file I had saved to my PC. Wifi calling is back and none of the Verizon bloatware!! I'm glad that worked or I'd have been switching to the backup phone.
Click to expand...
Click to collapse
Hello could you please link me a copy of your csc file? Also is there a way to get video calling on the native phone app too? Thanks
jayfrom805 said:
Hello could you please link me a copy of your csc file? Also is there a way to get video calling on the native phone app too? Thanks
Click to expand...
Click to collapse
I think I'm on the latest official Verizon firmware now. Try this one:
https://www.sammobile.com/samsung/galaxy-note9/firmware/SM-N960U/VZW/download/N960USQS1CSD1/266832/
I can't get native video calling working on Verizon. And for some reason Wifi calling is super buggy. Texting always works but calls go straight to VM. If I try to call out, it tells me to enable WiFi calling. I go to the settings, turn it on and I can call out. Go back to settings after the call and its turned back off again so new calls go straight to VM.
Sent from my SM-N960U using Tapatalk
joshw0000 said:
I think I'm on the latest official Verizon firmware now. Try this one:
https://www.sammobile.com/samsung/galaxy-note9/firmware/SM-N960U/VZW/download/N960USQS1CSD1/266832/
I can't get native video calling working on Verizon. And for some reason Wifi calling is super buggy. Texting always works but calls go straight to VM. If I try to call out, it tells me to enable WiFi calling. I go to the settings, turn it on and I can call out. Go back to settings after the call and its turned back off again so new calls go straight to VM.
Click to expand...
Click to collapse
Thanks for the quick response, Also does RCS(Google chat) work with Android messages on the build your using??
jd14771 said:
hey guys, i share your pain withslow samobile downloads. justa quick LPT, check this out.....
Click to expand...
Click to collapse
actually frija is the new tool