Database Develop

[Q] Help getting HTC One Stock

Hello xda community, I'd like to start with saying all the work done on this forum for open-source, freeware, and general android tweaks is awesome! Thank you.
So awesome in fact that I got a little bit ahead of myself with my new "Sprint HTC One". I followed this guide http://forum.xda-developers.com/showthread.php?t=2244060 to Unlock the bootloader, and root my phone. I then went a step further and wanted to flash a custom Rom. I followed this video, but strayed a little bit (whoops!). I went into twrp recovery, and flashed the "Beanstalk" super custom 4.3 (9/24/2013), along with smw6180_superwipe, and 4.3 gapps.
This actually was working for about 4 days, but now it won't connect to the mobile network even when toggling on and off airplane mode (A temp fix for the ROM). I went ahead and looked for solutions, namely to just get back to stock to see if the problem is bigger than just custom ROM. I relocked my bootloader, following http://www.youtube.com/watch?v=0WWNZpaQBh8&list=PLE395F615E026133D&index=11 Thus running into my current issue of Error 140 when trying to flash the RUU.
I'm asking anyone that could help, to offer suggestions on getting my phone back to stock. I would also like a couple suggestions for more stable ROM's (again, i knew what i getting into; ie disclaimers) that offer cool customization!

did you put the stock recovery back on before you locked the bootloader? Also are you super cid?

olorolo said:
did you put the stock recovery back on before you locked the bootloader? Also are you super cid?
Click to expand...
Click to collapse
No i don't believe so, Well now its not even going into twrp recovery. It displays tampered relocked security warning, s-on, hboot 1.44.0000 and This is the only screen i have for fastboot and the bootloader

I've seen this issue before let me take a quick look I think your ok
Sent from my HTCONE using Tapatalk 4
---------- Post added at 06:58 PM ---------- Previous post was at 06:57 PM ----------
You caught me in the middle of flashing the s-off firmware myself
Sent from my HTCONE using Tapatalk 4

Good to hear! Thank you for your time sir

get the newest twrp and rename it to recovery.zip put it in your cmd folder in bootloader type reboot bootloader fastboot flash flash recovery fastboot reboot
---------- Post added at 07:28 PM ---------- Previous post was at 07:18 PM ----------
once you have twrp back flash the s-off firmware http://forum.xda-developers.com/showthread.php?t=2467607 then the 4.3 rom of your choice

olorolo said:
get the newest twrp and rename it to recovery.zip put it in your cmd folder in bootloader type reboot bootloader fastboot flash flash recovery fastboot reboot
Click to expand...
Click to collapse
Either i don't understand fully or its failing. I have fastboot usb selected on my phone connected to usb on pc. I open my folder with cmd in it, and i typed what you said but error is "reboot" is not recognizable.
edit: I also have the trwp 2.6.3 image in the folder along with cmd.

Pug4567 said:
Either i don't understand fully or its failing. I have fastboot usb selected on my phone connected to usb on pc. I open my folder with cmd in it, and i typed what you said but error is "reboot" is not recognizable.
edit: I also have the trwp 2.6.3 image in the folder along with cmd.
Click to expand...
Click to collapse
twrp has to be renamed to recovery.zip try fastboot flash then type flash recovery then the name of the zip which is recovery.zip then fastboot reboot

I did that am getting error:cannot load recovery.
Also tried fastboot flash recovery openrecovery-twrp-2.6.3.0-m7wls.img
that resulted in this
sending 'recovery' (8608 KB)...
OKAY [ 1.120s]
writing 'recovery'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 1.880s
Or should i try http://forum.xda-developers.com/showthread.php?t=2314582

Pug4567 said:
I did that am getting error:cannot load recovery.
Also tried fastboot flash recovery openrecovery-twrp-2.6.3.0-m7wls.img
that resulted in this
sending 'recovery' (8608 KB)...
OKAY [ 1.120s]
writing 'recovery'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 1.880s
Or should i try http://forum.xda-developers.com/showthread.php?t=2314582
Click to expand...
Click to collapse
try hassoons all in one toolbox

I got twrp back by unlocking my phone again. Should i proceed with the 3.04.651.2 firmwre? beanstalk is now hanging on splash screen.

The phone isn't being recognized on my computer it seems, it shows as m7wls under device manager, when in twrp 2.6.3. When in bootloader it shows as One device, but neither is accessible.

Also tried flashing the s-off firmware, but got 'error cannot load firmware.zip'
Any more help would be appreciated, almost thinking of taking it back to sprint, i have a protection plan. But i would like to avoid that, im currently going to buy an otg-usb cable as well.

[X527] No wifi, no sim detection / Can't complete setup assistant [SOLVED]

Hello friends!
After i tried to find a way to bypass LeEco login on the install of stock based ROM , i have bricked my phone (not really bricked, but i will tell you). On the first boot i cant complete the setup, because X527 dont detect my sim cards and shows no wifi networks (So i cant go to developer options and can not use a dial code).
After i have read a lot, im sure it was a problem with the efs or nvram (The last working boot shows no serial and no bootloader). But now im on Stock ROM and Stock Recovery and need an option to repair efs/nvram over fastboot or stock recovery, without changing anything in the phone itself.
Hope you guys can help me...

i recommend you to install twrp and flash official stock rom it has stock recovery too so it will came back to original state. we have the original stock rom here so dont afraid to install twrp.

anjel05 said:
i recommend you to install twrp and flash official stock rom it has stock recovery too so it will came back to original state. we have the original stock rom here so dont afraid to install twrp.
Click to expand...
Click to collapse
I can't install TWRP because i have to go to the developer options, but my phone can not start....

quasimodo88 said:
I can't install TWRP because i have to go to the developer options, but my phone can not start....
Click to expand...
Click to collapse
What you need in developers option? Oem unlocking and usb debugging? I thnk in our device theyre already on default

anjel05 said:
What you need in developers option? Oem unlocking and usb debugging? I thnk in our device theyre already on default
Click to expand...
Click to collapse
Yes. If i want to install twrp in fastboot mode i get this error:
PS C:\adb> fastboot flash recovery twrp-3.1.1-1-s2.img
target reported max download size of 536870912 bytes
sending 'recovery' (17244 KB)...
OKAY [ 0.562s]
writing 'recovery'...
FAILED (remote: Partition flashing is not allowed)
finished. total time: 0.578s

quasimodo88 said:
Yes. If i want to install twrp in fastboot mode i get this error:
PS C:\adb> fastboot flash recovery twrp-3.1.1-1-s2.img
target reported max download size of 536870912 bytes
sending 'recovery' (17244 KB)...
OKAY [ 0.562s]
writing 'recovery'...
FAILED (remote: Partition flashing is not allowed)
finished. total time: 0.578s
Click to expand...
Click to collapse
You have to do
U need to unlock first dude

DarknessKiller said:
You have to do
U need to unlock first dude
Click to expand...
Click to collapse
Yes i know bro. But if i try to unlock i get this message:
PS C:\adb> fastboot oem unlock-go
...
FAILED (remote: oem unlock is not allowed)
finished. total time: 0.016s

quasimodo88 said:
Yes i know bro. But if i try to unlock i get this message:
PS C:\adb> fastboot oem unlock-go
...
FAILED (remote: oem unlock is not allowed)
finished. total time: 0.016s
Click to expand...
Click to collapse
Did you install the drivers you need?

anjel05 said:
Did you install the drivers you need?
Click to expand...
Click to collapse
Yes i did. My phone is shown under fastboot devices.

quasimodo88 said:
Yes i know bro. But if i try to unlock i get this message:
PS C:\adb> fastboot oem unlock-go
...
FAILED (remote: oem unlock is not allowed)
finished. total time: 0.016s
Click to expand...
Click to collapse
I think you are ****ed. Why oh why didn't you enable oem unlocking b4 flashing roms?
You can try
Fastboot erase modemst1
Fastboot erase modemst2
But it probably won't work cus your bootloader is locked
You can also try
Fastboot boot <insert name of your twrp img here>
But again doubt it'll work
---------- Post added at 08:31 PM ---------- Previous post was at 08:29 PM ----------
Try googling for an alternative way to unlock your bootloader
---------- Post added at 08:40 PM ---------- Previous post was at 08:31 PM ----------
Also if you can find a way to transfer files to your phone, try downloading eui 19s rom, edit the update script as needed(especially if you are downgrading), then send it to your phone /sdcard as update.zip and try to flash it through stock recovery.

Dudeonyx said:
I think you are ****ed. Why oh why didn't you enable oem unlocking b4 flashing roms?
You can try
Fastboot erase modemst1
Fastboot erase modemst2
But it probably won't work cus your bootloader is locked
You can also try
Fastboot boot <insert name of your twrp img here>
But again doubt it'll work
---------- Post added at 08:31 PM ---------- Previous post was at 08:29 PM ----------
Try googling for an alternative way to unlock your bootloader
---------- Post added at 08:40 PM ---------- Previous post was at 08:31 PM ----------
Also if you can find a way to transfer files to your phone, try downloading eui 19s rom, edit the update script as needed(especially if you are downgrading), then send it to your phone /sdcard as update.zip and try to flash it through stock recovery.
Click to expand...
Click to collapse
Fastboot erase... and fastboot boot... i have already tried.
Fastboot sideload... i have tried too, but im not sure if i do it right. I think my last chance is to try it over an otg cable, right?

quasimodo88 said:
Fastboot erase... and fastboot boot... i have already tried.
Fastboot sideload... i have tried too, but im not sure if i do it right. I think my last chance is to try it over an otg cable, right?
Click to expand...
Click to collapse
Any luck on googling a way to enable oem unlocking without access to developer options?
Or you can treat your phone as if it was bricked. Try downloading the sparse or Qfil file (not sure which is used for unbricking) for your model. And flashing through flashone or Qfil. Google or search xda for steps on how to unbrick this particular phone or Qualcomm phones in general. I believe it involves a step where you hold vol+, vol- & power key.
Anyway goodluck.

Dudeonyx said:
Any luck on googling a way to enable oem unlocking without access to developer options?
Or you can treat your phone as if it was bricked. Try downloading the sparse or Qfil file (not sure which is used for unbricking) for your model. And flashing through flashone or Qfil. Google or search xda for steps on how to unbrick this particular phone or Qualcomm phones in general. I believe it involves a step where you hold vol+, vol- & power key.
Anyway goodluck.
Click to expand...
Click to collapse
I dont find a way to unlock the bootloader. Flashing the qfil i have already tried, but it doesnt repair the issue. I think efs or nvram is broken.

quasimodo88 said:
I dont find a way to unlock the bootloader. Flashing the qfil i have already tried, but it doesnt repair the issue. I think efs or nvram is broken.
Click to expand...
Click to collapse
What version did you flash with Qfil? 19s usually doesn't ask for leeco login so try that. If you can bypass the leeco login I can walk you through the steps to repair your efs, I even have qcn files for x526 and x522 you can edit to fix it.
Don't know if these three options are possible, because I'm not sure what the qfil files contain but
1. with your current qfil if you can find a way to delete the letvaccount apk from the system image and reflash, that should bypass the login issues. Though dm verify might prevent the phone from booting past the splash screen, so you'll need to replace the kernel(boot) img with any custom one like illusion or overload
2. replace the system, data and kernel(boot) image with ones from miui 9 rom. This will flash miui instead and voila, no login issue
3. Replace Qfil recovery image with renamed twrp

Dudeonyx said:
What version did you flash with Qfil? 19s usually doesn't ask for leeco login so try that. If you can bypass the leeco login I can walk you through the steps to repair your efs, I even have qcn files for x526 and x522 you can edit to fix it.
Don't know if these three options are possible, because I'm not sure what the qfil files contain but
1. with your current qfil if you can find a way to delete the letvaccount apk from the system image and reflash, that should bypass the login issues. Though dm verify might prevent the phone from booting past the splash screen, so you'll need to replace the kernel(boot) img with any custom one like illusion or overload
2. replace the system, data and kernel(boot) image with ones from miui 9 rom. This will flash miui instead and voila, no login issue
3. Replace Qfil recovery image with renamed twrp
Click to expand...
Click to collapse
Thank's dude, that sounds good! I have to bypass the leeco setup, what i have to do? Can you give me an instruction, please? You can find the file on this site:
http://www.gsmhelpful.com/2017/08/how-to-flash-letv-le-2-x526-with-qfil-flash-tool.html

quasimodo88 said:
Thank's dude, that sounds good! I have to bypass the leeco setup, what i have to do? Can you give me an instruction, please? You can find the file on this site:
http://www.gsmhelpful.com/2017/08/how-to-flash-letv-le-2-x526-with-qfil-flash-tool.html
Click to expand...
Click to collapse
Have you flashed this? If so did it remove the leeco login or at least make it skipable?
Send a pic of the login screen
---------- Post added at 03:28 PM ---------- Previous post was at 03:25 PM ----------
Also unzip the sparse file and send me pics of its contents. Because I can't download the file right now

Dudeonyx said:
Have you flashed this? If so did it remove the leeco login or at least make it skipable?
Send a pic of the login screen
---------- Post added at 03:28 PM ---------- Previous post was at 03:25 PM ----------
Also unzip the sparse file and send me pics of its contents. Because I can't download the file right now
Click to expand...
Click to collapse
Yes, i have install it 2 times, but same issue. Can you give me an email address for the pictures, please?

quasimodo88 said:
Yes, i have install it 2 times, but same issue. Can you give me an email address for the pictures, please?
Click to expand...
Click to collapse
I've seen the pics, the system file is in parts so replacing it is very very difficult as I cant be sure how it was split.
But good news, I noticed a file named recovery
So move that file somewhere else.
Then rename your twrp file to recovery and copy it to that folder.
Then try flashing it, if successful this should give you custom recovery and I can work with that

Dudeonyx said:
I've seen the pics, the system file is in parts so replacing it is very very difficult as I cant be sure how it was split.
But good news, I noticed a file named recovery
So move that file somewhere else.
Then rename your twrp file to recovery and copy it to that folder.
Then try flashing it, if successful this should give you custom recovery and I can work with that
Click to expand...
Click to collapse
Ok, i will try it now. Don't run away :fingers-crossed:

quasimodo88 said:
Ok, i will try it now. Don't run away :fingers-crossed:
Click to expand...
Click to collapse
Good luck, also I noticed that your issue isn't leeco account login but rather Google's factory reset protection. So if this fails you can search for ways to bypass google factory reset protection.

Hard bricked P10 need help (SOLVED)

So I was trying to restore my rooted p10, I first tried using a twrp restore which didn't work then nothing would boot, so then I decided to reflash the ROM but the software I tried using relocks the bootloader then unlocks it again. So now what I have is my p10 with no custom recovery, a locked booloader and no working os installed. And as I cant boot the phone I cant get the information to get the code to unlock the bootloader. Any one have any ideas that doesn't involve paying for DC unlocker.
thanks
SOLVED: I found the imei on the box and unlocked the bootloader with that info.

Do you still have access to ADB/Fastboot ?
if yes then maybe try flashing main img files like kernel ect.
if no fastboot,i really dunno mate

virusdunil said:
Do you still have access to ADB/Fastboot ?
if yes then maybe try flashing main img files like kernel ect.
if no fastboot,i really dunno mate
Click to expand...
Click to collapse
I can have the phone in fastboot and run adb reboot bootloader and it says no devices found although the huawei HiSuite can detect the device being plugged in as it loads up when I plug the phone in

Try that...extract KERNEL from update.app....
in fastboot mode,adb : fastboot flash kernel KERNEL.img
se if this work...

virusdunil said:
Try that...extract KERNEL from update.app....
in fastboot mode,adb : fastboot flash kernel KERNEL.img
se if this work...
Click to expand...
Click to collapse
Not going to lie I am slightly out of my depth here, could you explain that further? I'm assuming I need to download an update.app but I have no idea where from or extracting the kernel from it
thanks

well,you have to dload the same firmware you have on your device...
is it the Oreo from the debrand/rebrand thread ?
if not ,go on teammt and dload your firmware...keep it somewhere safe
open update.zip and extract it...theres an update.app in there.
get the Huawei upade.app extractor here on XDA just type it in search bar or google it...
open the extractor you just dloaded and clik on settings tab...untick the Veryfy the checksum box and save...
click on extract tab and at far right of Update file box,clik on the .. box to search for your update.app you unzipped
if everything done correctly,all files will apperar...
now just right clik on KERNEL.img and select Extract selected.....................................or you can extract all and save them somewhere safe.
after you extracted the image, you have to put the KERNEL.img in your ADB folder in order to flash it
hope it helps

virusdunil said:
well,you have to dload the same firmware you have on your device...
is it the Oreo from the debrand/rebrand thread ?
if not ,go on teammt and dload your firmware...keep it somewhere safe
open update.zip and extract it...theres an update.app in there.
get the Huawei upade.app extractor here on XDA just type it in search bar or google it...
open the extractor you just dloaded and clik on settings tab...untick the Veryfy the checksum box and save...
click on extract tab and at far right of Update file box,clik on the .. box to search for your update.app you unzipped
if everything done correctly,all files will apperar...
now just right clik on KERNEL.img and select Extract selected.....................................or you can extract all and save them somewhere safe.
after you extracted the image, you have to put the KERNEL.img in your ADB folder in order to flash it
hope it helps
Click to expand...
Click to collapse
That Didn't work i just got:
C:\Users\jamie\Desktop\platform-tools>fastboot flash recovery KERNEL.img
target reported max download size of 471859200 bytes
sending 'recovery' (24576 KB)...
OKAY [ 0.528s]
writing 'recovery'...
FAILED (remote: Command not allowed)
finished. total time: 0.537s
im assuming its due to the bootloader not being unlocked. and in the meantime im running a deepscan on my hard drive to see if I can recover my unlock code which was lost when cloning to a new ssd. It has a few hour left though

you have it wrong...
its fastboot flash kernel KERNEL.img

virusdunil said:
you have it wrong...
its fastboot flash kernel KERNEL.img
Click to expand...
Click to collapse
same thing happened anyway:
C:\Users\jamie\Desktop\platform-tools>fastboot flash kernel KERNEL.img
target reported max download size of 471859200 bytes
sending 'kernel' (24576 KB)...
OKAY [ 0.526s]
writing 'kernel'...
FAILED (remote: Command not allowed)
finished. total time: 0.534s

well......
last try would be to install android studio and sdk tool here
i couldnt flash SYSTEM.img with normal adb... but succeeded with the sdk tool so.....
be patient,its long to install...

virusdunil said:
well......
last try would be to install android studio and sdk tool here
i couldnt flash SYSTEM.img with normal adb... but succeeded with the sdk tool so.....
be patient,its long to install...
Click to expand...
Click to collapse
I have android studio, how do I flash the img with it?

mine got installed in c/user/you/appdata/local/android/sdk/platform tools/
adb should be there...put your .img file there and open comand window ...like other adb

virusdunil said:
mine got installed in c/user/you/appdata/local/android/sdk/platform tools/
adb should be there...put your .img file there and open comand window ...like other adb
Click to expand...
Click to collapse
exactly the same :
C:\Users\jamie\AppData\Local\Android\Sdk\platform-tools>fastboot flash kernel KERNEL.img
target reported max download size of 471859200 bytes
sending 'kernel' (24576 KB)...
OKAY [ 0.533s]
writing 'kernel'...
FAILED (remote: Command not allowed)
finished. total time: 0.542s
Is it maybe worth seeing if I can get the serial number product emei and product id without the os?

Jyndon said:
same thing happened anyway:
C:\Users\jamie\Desktop\platform-tools>fastboot flash kernel KERNEL.img
target reported max download size of 471859200 bytes
sending 'kernel' (24576 KB)...
OKAY [ 0.526s]
writing 'kernel'...
FAILED (remote: Command not allowed)
finished. total time: 0.534s
Click to expand...
Click to collapse
I would say, you did something wrong, maybe false folder, false command or what ever.
If you get access via adb it should work.

kwaichang said:
I would say, you did something wrong, maybe false folder, false command or what ever.
If you get access via adb it should work.
Click to expand...
Click to collapse
I don't know that I do have access though as the device doesn't appear in adb devices list and the bootlaoder is locked.
Although I think I may have found a way of flashing a new bios without bootloader by using the huawei recovery installation.
The default one that uses wifi obviously doent work because its crap but while the device is off I can hold vol+ vol- and power and it loads into an installation screen that shows installation failed but i found that it maybe possible to flash the bios this way by putting the update.app onto the sd card. However the problem I'm having is that windows says the file is too big to copy and unzipping it inside of the sd card doesnt work either. Any ideas as to how I might be able to do it like this? (similar to this: https://android.stackexchange.com/q...are-installation-failed-error-when-booting-up and this too https://forum.xda-developers.com/p9-plus/help/software-install-failed-updating-p9-t3587676)

SOLVED
I managed to get most of the information to unlock the bootloader from the box which I luckily kept, then for the product ID I used https://imei24.com/warranty_info/Huawei/865545034273084/ and it worked perfectly!
Bootloader unlocked and then I used the common HWOTA to rebrand it back to its original firmware.
Thanks to those who helped.

Jyndon said:
So I was trying to restore my rooted p10, I first tried using a twrp restore which didn't work then nothing would boot, so then I decided to reflash the ROM but the software I tried using relocks the bootloader then unlocks it again. So now what I have is my p10 with no custom recovery, a locked booloader and no working os installed. And as I cant boot the phone I cant get the information to get the code to unlock the bootloader. Any one have any ideas that doesn't involve paying for DC unlocker.
thanks
SOLVED: I found the imei on the box and unlocked the bootloader with that info.
Click to expand...
Click to collapse
bro how did you unlock locked bootloader after factory reset and soft bricked after twrp and unrooted , erecovery loop just by using imei code ???

AjSri110 said:
bro how did you unlock locked bootloader after factory reset and soft bricked after twrp and unrooted , erecovery loop just by using imei code ???
Click to expand...
Click to collapse
any update guys? I have the same situation ... erecovery loop with fastboot/adb not available (no device) ...

AjSri110 said:
bro how did you unlock locked bootloader after factory reset and soft bricked after twrp and unrooted , erecovery loop just by using imei code ???
Click to expand...
Click to collapse
I know this is late but none the less, using the emei code I was able to request my code to unlock the bootloader through hwota. You cannot request this code anymore a way so you have to pay for dc unlocker which can rip the unlock code from the device.

petr.hybler said:
any update guys? I have the same situation ... erecovery loop with fastboot/adb not available (no device) ...
Click to expand...
Click to collapse
Is your bootloader unlocked?
If not you have your bootloader unlock code?
If not then you will need to pay for some software to get that code.
From there you can unlock the bootloader and use adb/fastboot again

I cant flash the recovery in my honor 4x

hello to all, accidentally delete the recovery of my smartphone and I have not been able to flash it using adb commands in Windows 10 therefore I can not restore the smartphone to the factory mode. please help

What error it gives when you type command 'fastboot flash recovery <recovery_file>'?
How did you deleted the recovery?
Also the end ("I can not restore the computer from the factory") doesn't make any sense.

keikari said:
What error it gives when you type command 'fastboot flash recovery <recovery_file>'?
How did you deleted the recovery?
Also the end ("I can not restore the computer from the factory") doesn't make any sense.
Click to expand...
Click to collapse
1. I think I deleted the recovery when I rooted the smartphone with kingroot.
2. the error that gives me is the following:
" S C:\adb> fastboot flash recovery recovery.img
target reported max download size of 524288000 bytes
sending 'recovery' (9304 KB)...
OKAY [ 0.222s]
writing 'recovery'...
FAILED (remote: Command not allowed)
finished. total time: 0.234s ".

crhistiandavidbonilla47 said:
1. I think I deleted the recovery when I rooted the smartphone with kingroot.
2. the error that gives me is the following:
" S C:\adb> fastboot flash recovery recovery.img
target reported max download size of 524288000 bytes
sending 'recovery' (9304 KB)...
OKAY [ 0.222s]
writing 'recovery'...
FAILED (remote: Command not allowed)
finished. total time: 0.234s ".
Click to expand...
Click to collapse
Can you still boot normally and do you have root access?
---------- Post added at 08:33 PM ---------- Previous post was at 08:29 PM ----------
Also try to re-unlock bootloader and if it doesn't work, re-lock and then unlock again. So we can be sure you don't have problems with that, because possible fix would otherwise make your phone worse.

keikari said:
Can you still boot normally and do you have root access?
---------- Post added at 08:33 PM ---------- Previous post was at 08:29 PM ----------
Also try to re-unlock bootloader and if it doesn't work, re-lock and then unlock again. So we can be sure you don't have problems with that, because possible fix would otherwise make your phone worse.
Click to expand...
Click to collapse
yes i can still boot normally, i erase kingroot so i think that i dont have root access

crhistiandavidbonilla47 said:
yes i can still boot normally, i erase kingroot so i think that i dont have root access
Click to expand...
Click to collapse
Well then your best choice is probably to try to re-install firmware and hope this does something. Do it with dload and force update method, because it doesn't use default recovery.
Or if you happen to have root access you can try this https://play.google.com/store/apps/details?id=com.cgollner.flashify&hl=en or similiar app to flash recovery while device running. (Or 'dd' command)

keikari said:
Well then your best choice is probably to try to re-install firmware and hope this does something. Do it with dload and force update method, because it doesn't use default recovery.
Or if you happen to have root access you can try this https://play.google.com/store/apps/details?id=com.cgollner.flashify&hl=en or similiar app to flash recovery while device running. (Or 'dd' command)
Click to expand...
Click to collapse
Nothing works

I had a similar problem: in fastboot I can install twrp successfully, but when I reboot, boot always to the stock emui recovery...
I don't know why.
I thought it was already installed twrp, I don't know why now boots to the stock one...
Does anyone can help me? Thanks.

Custom ROM / TWRP for Honor 10 Lite?

Hey guys,
I just bought the Honor 10 lite and I am not really a big fan of Huawei's EMUI. That's why I wondered if there is already any custom ROM somewhere out there for this phone? I know it's pretty new and I couldn't find anything so far..
Would still appreciate any information, if somebody knows more about it.
Thanks guys :highfive:

You need to unlock bootloader 1st and that's currently impossible for honor 10 lite with Android 9
Even paid service isn't an option.

Niight Knight said:
You need to unlock bootloader 1st and that's currently impossible for honor 10 lite with Android 9
Even paid service isn't an option.
Click to expand...
Click to collapse
Oh alright, forgot that they stopped providing unlock-code's.. Hope someone figures out something, still not a friend of EMUI.
Thanks for the reply man ?

Niight Knight said:
You need to unlock bootloader 1st and that's currently impossible for honor 10 lite with Android 9
Even paid service isn't an option.
Click to expand...
Click to collapse
I just noticed that with the latest fw update as of today (9.0.1.142), the OEM unlock option can be now changed from the developer options menu, I guess it is still impossible to unlock it but well, now at least it lets you to change the option (before the update it wasn't even possible to do so). I'm not now able to but someone should give it a try to see if by any chance they messed up with OEM...

I think we'll have to wait many months before someone finds an hack to unlock bootloader. This is a very recent smartphone and also Huawei and Honor are not for modding, since it's everything locked and they're not providing unlock codes anymore. Too bad I discovered it after I bought it !

tomax80 said:
I think we'll have to wait many months before someone finds an hack to unlock bootloader. This is a very recent smartphone and also Huawei and Honor are not for modding, since it's everything locked and they're not providing unlock codes anymore. Too bad I discovered it after I bought it !
Click to expand...
Click to collapse
Hello. I have an unlocked Honor 10 Lite, but can't to install Magisk. Who can help me with this question?

Shlendr said:
Hello. I have an unlocked Honor 10 Lite, but can't to install Magisk. Who can help me with this question?
Click to expand...
Click to collapse
How did you unlock the bootloader?
To install magisk you need to install twrp first, then flash magisk zip from there. But there's no twrp for our device so far, maybe you can try running a twrp of a device with our same socket without installing it, from fastboot, and see if it works. For example
Code:
fastboot boot twrpfilename.img
If it works, then you can try flashing magisk from there.

tomax80 said:
How did you unlock the bootloader?
To install magisk you need to install twrp first, then flash magisk zip from there. But there's no twrp for our device so far, maybe you can try running a twrp of a device with our same socket without installing it, from fastboot, and see if it works. For example
Code:
fastboot boot twrpfilename.img
If it works, then you can try flashing magisk from there.
Click to expand...
Click to collapse
I got the phone from presentation. So, it is already unlocked from factory.
I'm not realy understand how can i use the twrpfilename.img? And where i can get this file? Did you have some manual?
I tried to flash twrpkirin.img from Honor 8x, but all system sections are encrypted. So i can't flash magisk.zip
---------- Post added at 08:59 AM ---------- Previous post was at 08:40 AM ----------
tomax80 said:
How did you unlock the bootloader?
To install magisk you need to install twrp first, then flash magisk zip from there. But there's no twrp for our device so far, maybe you can try running a twrp of a device with our same socket without installing it, from fastboot, and see if it works. For example
Code:
fastboot boot twrpfilename.img
If it works, then you can try flashing magisk from there.
Click to expand...
Click to collapse
I have an error:
C:\adb>fastboot boot JSNtwrp.img
downloading 'boot.img'...
OKAY [ 0.550s]
booting...
FAILED (remote: invalid command)
finished. total time: 0.550s

I got the phone from presentation. So, it is already unlocked from factory.
I'm not realy understand how can i use the twrpfilename.img? And where i can get this file? Did you have some manual?
I tried to flash twrpkirin.img from Honor 8x, but all system sections are encrypted. So i can't flash magisk.zip
I have an error:
C:\adb>fastboot boot JSNtwrp.img
downloading 'boot.img'...
OKAY [ 0.550s]
booting...
FAILED (remote: invalid command)
finished. total time: 0.550s
Click to expand...
Click to collapse
There's no manual, just try booting phone in bootloader mode then use that command I told in the previous post. It's just a try , there are no tutorials for this phone so far

TWRP Recovery Honor 10 Lite
tomax80 said:
There's no manual, just try booting phone in bootloader mode then use that command I told in the previous post. It's just a try , there are no tutorials for this phone so far
Click to expand...
Click to collapse
Already done. Got an error

Shlendr said:
Already done. Got an error
Click to expand...
Click to collapse
Ok then probably that version of twrp doesn't work with our phone , we just need to wait for a compatible one.

TWRP Recovery Honor 10 Lite
tomax80 said:
Ok then probably that version of twrp doesn't work with our phone , we just need to wait for a compatible one.
Click to expand...
Click to collapse
I can send all nesessary data of the phone, which will help to creat a workable TWRP. But who can do this?)

Shlendr said:
I can send all nesessary data of the phone, which will help to creat a workable TWRP. But who can do this?)
Click to expand...
Click to collapse
I have no idea sincerely, I think we just need to wait patiently till someone works on it . And it's also not granted that it's going to happen, since it's everything blocked.

guys, what about Android root apps? can those apps help?

TWRP Recovery Honor 10 Lite
cyrusiranmehr said:
guys, what about Android root apps? can those apps help?
Click to expand...
Click to collapse
No

locked after i got into bootloader
hey guys, i tried using bootloader first time and got myself into some situation:
C:\Users\USAKg\AppData\Local\Android\Sdk\platform-tools>adb reboot bootloader
adb server version (39) doesn't match this client (40); killing...
* daemon started successfully
C:\Users\USAKg\AppData\Local\Android\Sdk\platform-tools>fastboot flash recovery_ramdisk twrp_bkl_0.7.img
Sending 'recovery_ramdisk' (23542 KB) OKAY [ 0.711s]
Writing 'recovery_ramdisk' FAILED (remote: 'Command not allowed')
fastboot: error: Command failed
Does anyone know how to unlock this one? or do i have to buy unlock bootloader code?
from site named: global unlocking solutions.miiduu ???

GraveDanger said:
hey guys, i tried using bootloader first time and got myself into some situation:
C:\Users\USAKg\AppData\Local\Android\Sdk\platform-tools>adb reboot bootloader
adb server version (39) doesn't match this client (40); killing...
* daemon started successfully
C:\Users\USAKg\AppData\Local\Android\Sdk\platform-tools>fastboot flash recovery_ramdisk twrp_bkl_0.7.img
Sending 'recovery_ramdisk' (23542 KB) OKAY [ 0.711s]
Writing 'recovery_ramdisk' FAILED (remote: 'Command not allowed')
fastboot: error: Command failed
Does anyone know how to unlock this one? or do i have to buy unlock bootloader code?
from site named: global unlocking solutions.miiduu ???
Click to expand...
Click to collapse
Bootloader is locked and you can't flash anything till it's locked. There are paid services to unlock it but so far our device is not supported. Though there's no sense to pay a lot of money to unlock it, also if it was supported, just to have root (if you're lucky) , since there are no custom ROMs for Honor 10 lite. Our device is not made for modding. The only solution on my opinion is to wait patiently till someone finds an hack to unlock it for free, or sell your phone and buy a Xiaomi. You can unlock bootloader very easily and there are plenty of custom ROMs for it.

TWRP Recovery Honor 10 Lite
GraveDanger said:
hey guys, i tried using bootloader first time and got myself into some situation:
C:\Users\USAKg\AppData\Local\Android\Sdk\platform-tools>adb reboot bootloader
adb server version (39) doesn't match this client (40); killing...
* daemon started successfully
C:\Users\USAKg\AppData\Local\Android\Sdk\platform-tools>fastboot flash recovery_ramdisk twrp_bkl_0.7.img
Sending 'recovery_ramdisk' (23542 KB) OKAY [ 0.711s]
Writing 'recovery_ramdisk' FAILED (remote: 'Command not allowed')
fastboot: error: Command failed
Does anyone know how to unlock this one? or do i have to buy unlock bootloader code?
from site named: global unlocking solutions.miiduu ???
Click to expand...
Click to collapse
Hello. What the twrp_bkl_0.7.img? Where did you get it?) Is it workable?

You can always install a different launcher like Nova Launcher

this link claims you can use TWRP from Huawei P9 lite
https://unofficialtwrp.com/root-twrp-hry-lx1-hry-lx2-hry-al00