[Firmware] Huawei P8 GRA-L09 B393 27/02/17 - Huawei P8 Guides, News, & Discussion

New firmware with Google Security Patch updated at March:
Changelog is here {only Google security patch update to March}: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G985/g104/v77480/f1/full/changelog.xml
File OTA here: unusable so no link
Full update here: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G985/g104/v77480/f1/full/update.zip
Enjoy
Found with Firmware Finder

I'm happy that at least we get the appropriate google security updates.

Anybody installed this? Is it ok?

Flashed from 390 to 393. Works fine!

hidralazina said:
Anybody installed this? Is it ok?
Click to expand...
Click to collapse
Yes stable

I failed to flash from 390 using the dialer method.

Flashed over B392, no problems so far.
Used dialer method.
Sent from my HUAWEI GRA-L09 using XDA Labs

Last ROMs (B392 and B393) fail when updating using dialer method. But they do update, at 100% it shows an error "update failed", when restarted it does optimization of a system and boots and then in settings it shows the correct version (B393 currently).
Strange

flamelab said:
I'm happy that at least we get the appropriate google security updates.
Click to expand...
Click to collapse
thats the least they can do, minimum of work, still very dissapointed by not getting EMUI 5, by the time i was buying this phone i considered this as a sure thing, but i didnt know what huawei is really about

My phone fails to update using the dialer method. Re-trying now using the power+volup+voldown method.

ITzAndry said:
My phone fails to update using the dialer method. Re-trying now using the power+volup+voldown method.
Click to expand...
Click to collapse
How did it go?

ITzAndry said:
My phone fails to update using the dialer method. Re-trying now using the power+volup+voldown method.
Click to expand...
Click to collapse
not using CM 13 anymore? is it bad? im thinking about give it a try

potworny said:
How did it go?
Click to expand...
Click to collapse
All clear, i just redownloaded the update cuz it was damaged.
00471 said:
not using CM 13 anymore? is it bad? im thinking about give it a try
Click to expand...
Click to collapse
nononono, i was just re-trying the stock system for some experiments. The CM13 is fine, and it works very well, but sometimes third-part apps (downloaded via apk or play store) crash.

nononono, i was just re-trying the stock system for some experiments. The CM13 is fine, and it works very well, but sometimes third-part apps (downloaded via apk or play store) crash.
Click to expand...
Click to collapse
thanks for reply, i will wait till its more stable

ITzAndry said:
The CM13 is fine, and it works very well, but sometimes third-part apps (downloaded via apk or play store) crash.
Click to expand...
Click to collapse
I've tried CM13 ROM but the crashes were very annoying. Opera browser was crashing couple of times per hour, Swype keyboard was crashing when I was typing, a lot of games were crashing at launch, Google Translate was crashing when tried to use camera. I would love to have CM13 instead of Huawei firmware but for now it's unusable.
Topic: successful update from B321 to B393 using dialer method.

Guys,
How do I get stock recovery from this version of the ROM?
On B390 I installed TWRP, replaced the HOSTS file with one that blocks ads, removed some unnecessary system apps and replaced TWRP with stock recovery.
Do you think that using B391 recovery (https://www.androidfilehost.com/?fid=529152257862705190) is a good idea?
I don't want to root the phone because I don't feel it's necessary.

potworny said:
Guys,
How do I get stock recovery from this version of the ROM?
On B390 I installed TWRP, replaced the HOSTS file with one that blocks ads, removed some unnecessary system apps and replaced TWRP with stock recovery.
Do you think that using B391 recovery (https://www.androidfilehost.com/?fid=529152257862705190) is a good idea?
I don't want to root the phone because I don't feel it's necessary.
Click to expand...
Click to collapse
Huawei update extractor thread ok XDA

to me seems to be improved both camera.. especialy front camera, the back looks that he used more agressive smoth procedure

version runs great on my wifes p8. however the background changes in the window of a smart cover is still broken

Works fine
Works fine on my P8
Thanks :good:

Related

[DISCUSSION] CM13 for Moto X 2014 (victara)

This is a discussion thread for Official CM13 Nightly for victara (Motorola Moto X 2014). Note that I'm not a CM13 contributor or dev, I'm an user just like you.
If you wanna try CM13 on our beloved phone, this is the official download link: http://get.cm/?device=victara
->I'm not responsible for bugs (neither the devs, it's a nightly after all) and for bricking your phone in the installation process.
If you wanna know the nightlies changelog or what's to come on the next one, see: http://www.cmxlog.com/13/victara/
Here we can discuss about the ROM development, bugs, workarounds, doubts about CM's and Android's new version, etc.
Limitations on Official CM13 for Moto X 2014 (victara):
-Casting with Chromecast isn't working;
Why we cannot delete unuseful posts?​
Only the jedis can see this secret:
You can't see this secret.
music player is fc too on 24/11 build,downloading 25/11 build to see that issue is resolved
kleytonhunter said:
music player is fc too on 24/11 build,downloading 25/11 build to see that issue is resolved
Click to expand...
Click to collapse
Working fine on 25/11, at least it opens without crashes. I don't have any .mp3 file to test it, tho.
Sent from my XT1095 using Tapatalk
11/25 update fixed Snapchat and Google Camera FC for me (I don't use FB apps but word is they work now too), though it wasn't easy to update. 11/24 seems to have issues with booting to recovery.
Here is a workaround to update to 11/25:
1) Download your favorite recovery.img to your computer
2) Download 11/25 CM update from "About Device" section
3) Reboot to bootloader
4) In terminal on computer, run "fastboot boot recovery.img". This will cause the phone to load the recovery image into RAM and boot from there
5) Navigate to the CM update and flash as usual
6) You're now on 11/25 build and can access recovery regularly
Cheers!
Still cant write in system folder, i can use adb to gain access so adaway can overwrite the host file
any alternative to adaway???
lucasdeeiroz said:
Working fine on 25/11, at least it opens without crashes. I don't have any .mp3 file to test it, tho.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
the fc occurs when you tap artists tab and and then an artist,fc in 25/11 too,is only me?
awacker89 said:
11/25 update fixed Snapchat and Google Camera FC for me (I don't use FB apps but word is they work now too), though it wasn't easy to update. 11/24 seems to have issues with booting to recovery.
Here is a workaround to update to 11/25:
1) Download your favorite recovery.img to your computer
2) Download 11/25 CM update from "About Device" section
3) Reboot to bootloader
4) In terminal on computer, run "fastboot boot recovery.img". This will cause the phone to load the recovery image into RAM and boot from there
5) Navigate to the CM update and flash as usual
6) You're now on 11/25 build and can access recovery regularly
Cheers!
Click to expand...
Click to collapse
You're right. Last update fixed Snapchat, Facebook and Facebook Messenger. Google Camera is still forcing close, tho. I will test Netflix and report back here.
Sent from my XT1095 using Tapatalk
kleytonhunter said:
the fc occurs when you tap artists tab and and then an artist,fc in 25/07 too,is only me?
Click to expand...
Click to collapse
Yeah, I can confirm that. It crashes when you select one artist. But you can always use Play Music instead.
Sent from my XT1095 using Tapatalk
gianboy said:
Still cant write in system folder, i can use adb to gain access so adaway can overwrite the host file
any alternative to adaway???
Click to expand...
Click to collapse
System still in read-only mode. Nothing that we can do for now.
Sent from my XT1095 using Tapatalk
OP updated. Snapchat, Facebook and Facebook Messenger fixed. Music, Netflix and Google Camera still on the issues list.
Sent from my XT1095 using Tapatalk
The linked twrp worked! Thank you!
lucasdeeiroz said:
Known bugs on Official CM13 for Moto X 2014 (victara):
-[FIXED]Official Facebook and Facebook Messenger apps FC;
-Netflix app won't load any video;
-[FIXED]Snapchat app FC;
-SuperSU not working (use CM's root method instead, see post #4);
-Latest Google Camera app crashes on Video Recorder mode (Moto Camera works tho, you can install it via Play Store);
-CM's Music app will FC when you select an artist (use Play Music instead);
-Maybe you have to use the ROM in English language. Some people are reporting FC's on another languages.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
I'm having problems with the audio recording of whatapp. Did a clean install of the new cm13 and even then the error persisted. I tested the whatapp downloaded via platform via apk beta and apk mod, all with the same error.
cm13 is not good. so many bug[emoji55]
Sent from my XT1085 using Tapatalk
妹妹你好胸 said:
cm13 is not good. so many bug[emoji55]
Sent from my XT1085 using Tapatalk
Click to expand...
Click to collapse
Relax! Initial nightlies are expected to be buggy. Wait a few weeks for a fairly stable build.
Joiner22 said:
I'm having problems with the audio recording of whatapp. Did a clean install of the new cm13 and even then the error persisted. I tested the whatapp downloaded via platform via apk beta and apk mod, all with the same error.
Click to expand...
Click to collapse
I saw some people complaining about this problem, but honestly WhatsApp audio is OK here for me... I don't know what's different.
Sent from my XT1095 using Tapatalk
twrp backup
hi,i have made a backup with twrp of my stock 6.0 and after flash cm 13 and it seems a little bug yet, iam restored that backup and now my phone is stuck on motorola logo with restarts but it ever stay stuck on moto logo,every time i flash cm13 all works fine,restored 2 times before and no problem,but when i restored today get stuck, someone know how to fix?
kleytonhunter said:
hi,i have made a backup with twrp of my stock 6.0 and after flash cm 13 and it seems a little bug yet, iam restored that backup and now my phone is stuck on motorola logo with restarts but it ever stay stuck on moto logo,every time i flash cm13 all works fine,restored 2 times before and no problem,but when i restored today get stuck, someone know how to fix?
Click to expand...
Click to collapse
Did you wipe system partition? Try it and see if that works.
If you have a problem with your backup, you can flash latest firmware from Motorola (deleting two lines from flashfile.txt), making a downgrade. After that you can upgrade by OTA to 6.0. Note that you have to flash the LATEST firmware, you can't flash the pre-patched stagefright firmware, because with two OTA updates you will get a hard brick.
Step-by-step in Portuguese: http://motox-brasil.blogspot.com.br/2015/11/tutorial-moto-x-all-como-fazer.html?m=1
Or even better, you can flash a clean backup: http://motox-brasil.blogspot.com.br/2015/11/backup-twrp-moto-x2-60-backup-do-twrp.html?m=1
Sent from my XT1095 using Tapatalk

So what about getting root?

Now that many 5C models have the emui 5.0/nougat update, has anyone tried rooting it yet? Also is it still the case that Xposed is still not available for nougat??
yeah theres no android N xposed even abdroid 8 is coming already... i dont see point on rooting without xposed since theres no root adblock apps.
I like to install sound mods and I use lucky patcher to remove ads and get in-app stuff, freedom app as well. They all need root. Just downloaded open kirin twrp for emui 5.0. It's been deleted from xda posts but seek and ye shall find. I also have the revolution recovery twrp for nougat but although it worked for emui 5 beta, apparently it doesn't with the proper release. I downloaded superuser for emui 5.0/nougat so now I'm going to do various backups and give rooting a go.
usually there comes bug fix OTA in few weeks after android version updte, i wait till device is discontinued updates and root thn
thelous said:
usually there comes bug fix OTA in few weeks after android version updte, i wait till device is discontinued updates and root thn
Click to expand...
Click to collapse
Okay, so I was just about to root but then I see your post but can u explain in more detail please why it's better to wait for final ota. And do you know for sure if/when there will be more OTA bug fixes??
iantechie1979 said:
Okay, so I was just about to root but then I see your post but can u explain in more detail please why it's better to wait for final ota. And do you know for sure if/when there will be more OTA bug fixes??
Click to expand...
Click to collapse
waiting for official ota is good to be sure that region is correct so youre able to make calls and text, but NEM-L21 has only one region so it doesnt matter if you use official OTA or use proxy method.
Okay so I have successfully rooted my phone by flashing super user zip file through twrp! Damn shame Xposed framework is not available for nougat though but at least I can install sound mods and can use lucky patcher to get rid of ads in apps and use freedom to get free inapp stuff. Also I use root essentials and L speed app. Beggars can't be choosers :angel:
Sent from my NEM-L51 using XDA Labs
iantechie1979 said:
Okay so I have successfully rooted my phone by flashing super user zip file through twrp! Damn shame Xposed framework is not available for nougat though but at least I can install sound mods and can use lucky patcher to get rid of ads in apps and use freedom to get free inapp stuff. Also I use root essentials and L speed app. Beggars can't be choosers :angel:
Sent from my NEM-L51 using XDA Labs
Click to expand...
Click to collapse
Which TWRP and SU.zip versions did you use? And you're on B350/351 right?
SkaldfraNorden said:
Which TWRP and SU.zip versions did you use? And you're on B350/351 right?
Click to expand...
Click to collapse
I'll post the files soon.I'm on B350.
Sent from my NEM-L51 using XDA Labs
SkaldfraNorden said:
Which TWRP and SU.zip versions did you use? And you're on B350/351 right?
Click to expand...
Click to collapse
I found this : https://forum.xda-developers.com/huawei-p9lite/development/twrp-t3588356
I just tried it. Both the unofficial TWRP and the modded SuperSU seem to work so far.
Yes I think we used the same files and installation. OpenKirinHi6250 twrp and superuser.zip for emui 5.0. :good:
Sent from my NEM-L51 using XDA Labs
iantechie1979 said:
Yes I think we used the same files and installation. OpenKirinHi6250 twrp and superuser.zip for emui 5.0. :good:
Sent from my NEM-L51 using XDA Labs
Click to expand...
Click to collapse
Seems to work fine so far. But I really have no idea why this TWRP works while the official doesn't. Same about this modded SuperSU.
Zarou said:
Seems to work fine so far. But I really have no idea why this TWRP works while the official doesn't. Same about this modded SuperSU.
Click to expand...
Click to collapse
Have you or anyone else had any problems installing busy box? I tried installing busy box pro(sterricson app) and it would not install. I tried all 4 paths to install to but it failed every time. So I installed busy box pro(jrummy app) and after running a script in the app to mount read/write I was able to install successfully. Just to make sure I install to su/bin, su/xbin, system/bin and system/xbin. I ran a root/busy box checker app.and it says both installed correctly...
Sent from my NEM-L51 using XDA Labs
iantechie1979 said:
Have you or anyone else had any problems installing busy box? I tried installing busy box pro(sterricson app) and it would not install. I tried all 4 paths to install to but it failed every time. So I installed busy box pro(jrummy app) and after running a script in the app to mount read/write I was able to install successfully. Just to make sure I install to su/bin, su/xbin, system/bin and system/xbin. I ran a root/busy box checker app.and it says both installed correctly...
Sent from my NEM-L51 using XDA Labs
Click to expand...
Click to collapse
I use the busybox installer app by meefik (because it's free software) and it works fine.
Thanks Zarou and iantechie1979, I was looking for working TWRP since days.
TWRP and SuperSu worked for me too (Honor 5C NEM-L51 version B350).
snyfear said:
Thanks Zarou and iantechie1979, I was looking for working TWRP since days.
TWRP and SuperSu worked for me too (Honor 5C NEM-L51 version B350).
Click to expand...
Click to collapse
Be careful though, I and some other user noticed that restoring backups from this TWRP will result in a phone with no sound at all. I don't know if this is fixable, factory reset don't put it back to normal.
Other than that, this TWRP seemed, but I can say for sure. In any case, DO NOT RESTORE BACKUPS from this TWRP.

Latest Google Dialer running on stock Nougat

Here is what I did to get the latest Google dialer to run on my Stock Nougat ROM.
Install the dialer framework via TWRP (attached)
Freeze the stock phone app
Install the Google phone app (attached), make it the default and give it permissions
Reboot
I am now using the latest Google Dialer.
Proximity search and Spam detection work too.
swieder711 said:
Here is what I did to get the latest Google dialer to run on my Stock Nougat ROM.
Install the dialer framework via TWRP (attached)
Freeze the stock phone app
Install the Google phone app (attached), make it the default and give it permissions
Reboot
I am now using the latest Google Dialer.
Proximity search and Spam detection work too.
Click to expand...
Click to collapse
I can confirm this works on Stock Magisk rooted Nougat 7.0
EDIT/UPDATE 11/09 - Cannot hang up phone. Went back to stock app.
Stock 7.0, no root, booted twrp, flashed, ..... Everything okay.
Thanks. All you need is the framework. Then download dialer. This was easier than using GAPPS.
schneid said:
I can confirm this works on Stock Magisk rooted Nougat 7.0
EDIT/UPDATE 11/09 - Cannot hang up phone. Went back to stock app.
Click to expand...
Click to collapse
Did you select the new phone app as the default?
Sent from my Nexus 7 using Tapatalk
swieder711 said:
Did you select the new phone app as the default?
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
I "froze" the original in TiBackup. Not enough?
schneid said:
I "froze" the original in TiBackup. Not enough?
Click to expand...
Click to collapse
Not enough. You need to select the new phone app as the default. Manage Apps / select gear / default
Sent from my XT1575 using Tapatalk
Not that this makes any sense, but I installed this and immediately lost LTE service in a place where I always have LTE service. Is there a way to uninstall the framework to see if it caused the issue?
NEVER MIND. Seems to have just been a glitch.
Which Phone Properties should be Frozen, I have 3 in Titanium Backup, the Phone Check is an app I use to check for Signal Strength.
CLETjB said:
Which Phone Properties should be Frozen, I have 3 in Titanium Backup, the Phone Check is an app I use to check for Signal Strength.
Click to expand...
Click to collapse
The one that says PHONE 3.00
CLETjB said:
Which Phone Properties should be Frozen, I have 3 in Titanium Backup, the Phone Check is an app I use to check for Signal Strength.
Click to expand...
Click to collapse
According to TiBu, I am currently running "Phone 14.0.176716531" which I think it the latest update from Google. The update came out this week. Any other Phone apps should be frozen.
PS: Don't forget to select the new Phone app as the default. Its under the "gear icon" in Manage Apps.
In Titanium Backup, could the new Phone be converted to System App?
I still haven't got the G Phone to display right but have manged to turn on WiFi Calling in the Moto Phone. Will the G Phone support WiFi Calling? WiFi Calling is pretty slick. Reception sucked in my house but with WiFi Calling i feel like I am using an AT&T landline from years ago. As they said, "you can hear a pin drop".
I turned on WiFi caller using Magisk VoEnabler.
This works for me, and play store did update to v14, but now I can't update to v15 due to a 505 error. I tired downloading the apk from apkmirror but get a conflicting name error, even when I uninstall the original app. Any ideas on how to update?
slicetwo said:
This works for me, and play store did update to v14, but now I can't update to v15 due to a 505 error. I tired downloading the apk from apkmirror but get a conflicting name error, even when I uninstall the original app. Any ideas on how to update?
Click to expand...
Click to collapse
I am on v14 and see a failed update to v15. I wonder if there is a new framework file. Let me look around.
swieder711 said:
I am on v14 and see a failed update to v15. I wonder if there is a new framework file. Let me look around.
Click to expand...
Click to collapse
Awesome. Thanks!
I copied the V15 Dialer.apk (was renamed) to the folder /system/priv-app/dialer. I made the permissions -rw-r-r-. After a reboot I am now running the latest Google Dialer.
Prior to installing the apk, I ran a Zip file created by xabat, https://drive.google.com/file/d/1dnZgFzKxYt9j8_uDwp5_36irMDsvN0q7/view?usp=drivesdk but I dont think that helped since I was still running the V14 Dialer afterwards.
Video icon is greyed-out and not seeing a setting for Assisted Dialing. Looks like v14, but its definitely v15.
swieder711 said:
I copied the V15 Dialer.apk (was renamed) to the folder /system/priv-app/dialer. I made the permissions -rw-r-r-. After a reboot I am now running the latest Google Dialer.
Prior to installing the apk, I ran a Zip file created by xabat, https://drive.google.com/file/d/1dnZgFzKxYt9j8_uDwp5_36irMDsvN0q7/view?usp=drivesdk but I dont think that helped since I was still running the V14 Dialer afterwards.
Video icon is greyed-out and not seeing a setting for Assisted Dialing. Looks like v14, but its definitely v15.
Click to expand...
Click to collapse
So should I get the apk from apkmirror? I'm a bit confused.
Yes.
I'll post the apk when I am back on my PC.
swieder711 said:
Yes.
I'll post the apk when I am back on my PC.
Click to expand...
Click to collapse
Kick ass. Does it replace the stock dialer apk that's in that folder? Should I remove the v14 app via tibu?

New design Android Messages not working on P20 pro

Hi guys,
So I have the latest version of Android Messages but i still have the old design. I've been trying to uninstall and reinstall it but still not working. I've also tried to reboot my phone and everything but it still stuck on old design.
If anyone can help me I really appreciate it.
Thanks.
It's probably a server side push. I tried the version that first had dark mode but then Google pulled it
Can you tell which version you got?
I had the update, dark mode completely flips and app doesn't open. Switched off the dark mode and all fine. (On pixel experience treble ROM)
Ayfred said:
Hi guys,
So I have the latest version of Android Messages but i still have the old design. I've been trying to uninstall and reinstall it but still not working. I've also tried to reboot my phone and everything but it still stuck on old design.
If anyone can help me I really appreciate it.
Thanks.
Click to expand...
Click to collapse
Works fine for me. No crashing.
Currently on 152
dladz said:
Works fine for me. No crashing.
Currently on 152
Click to expand...
Click to collapse
You're clearly using emui. Probably caused by the treble ROM, although I've read reviews on Google play saying the same (most likely unrooted phones)
dladz said:
Works fine for me. No crashing.
Currently on 152
Click to expand...
Click to collapse
I am on same version of Android Messages and CLT-L29 8.1.0.152 (C636) with no issues. except not able to set custom notification sms sounds for each person like I could before.
Pretty sure after I installed the updated version I force stopped the app then reopened and its been running fine
nibs777 said:
Pretty sure after I installed the updated version I force stopped the app then reopened and its been running fine
Click to expand...
Click to collapse
I've tried this but nope still old design.
josdehaes said:
You're clearly using emui. Probably caused by the treble ROM, although I've read reviews on Google play saying the same (most likely unrooted phones)
Click to expand...
Click to collapse
Why wouldn't I be using emui? There is no mention of what ROM is in use in this thread??
Also I am rooted.
Magisk 16.4
PS: There is a tweak that can be done but this was reverted back afterwards, can't remember it exactly but just Google it.
After the most recent update the dark settings were listed and I've had no issues
you need to enable dark mode, force close the app, clear cache.
then it should work.
mrengineer said:
you need to enable dark mode, force close the app, clear cache.
then it should work.
Click to expand...
Click to collapse
Everytime i did that it still shows me the old design

No solution for GMS on phone...?

Hi there,
1 week ago, i bought the p40 pro+ and ever-since I have been trying to downgrade but i feel like its not possible.
Every video on youtube doesnt work for me because they have all different base software models and therefore also different firmwares. I then asked some help on this form in an existing topic but nobody was able to help me. I also had contact with Bender-007 (creator of googlefier, i believe?) and after 3 days going back and forward, he wasnt able to fix it. So im starting to believe that my phone is unable to downgrade?
Things I have tried:
- hisuite + proxy
- googlefier
- VM ware (which worked but i dont wanna use my phone this way)
- downgrading without PC or USB method but not working.
So, the real issue is that everyone keeps telling me that i need to download firmware xxx.131; but i keep telling everyone that xxx.131 doesnt exist for my base software information! I have ELS-LGRP6 and the earliest firmware existing on firmware finder is xxx.132; not 131.
So, if the correct firmware i need to downgrade to, is non-existent to any firmware finder i use, then how can i downgrade?
Look at the screenshot. The green are alphabetically set to show LGRP6 and it ends at xxx.132; then magenta starts which is only LGRP4 and this is the only one that shows me xxx.131.... But i need from ELS-LGRP6 EDIT: screenshot is not showing so click the link. https://ibb.co/5r4vzP4
So anyone please has some solutions? :fingers-crossed::fingers-crossed::fingers-crossed:
Have you followed the redskull guide from YouTube? I was able to install Gapps using his guide on 10.1.0.155.
Please try his and have patience, because you might be repeating the procedure several times.
I have tried from over 15 different youtubers. Including Redskull. But I will give it another try. Thank you. Ill keep the topic informed. As long as i havent written that it works, im more than happy to hear other peoples solutions. Thank you!
theintelligent said:
Have you followed the redskull guide from YouTube? I was able to install Gapps using his guide on 10.1.0.155.
Please try his and have patience, because you might be repeating the procedure several times.
Click to expand...
Click to collapse
banana-splits said:
I have tried from over 15 different youtubers. Including Redskull. But I will give it another try. Thank you. Ill keep the topic informed. As long as i havent written that it works, im more than happy to hear other peoples solutions. Thank you!
Click to expand...
Click to collapse
What I did was to follow RedSkull's guide till account creation and launching of the blue G App (pressing the blue button and let it run in the background), and then I start following the @eloygomezTv guide from that step. Only change I did was before installing the Google Play Services (from EloYGomeZTv files), I uninstalled the microG. And then I followed the guide from EloYGomeZTv with his files and viola, I was able to install it. It took me two tries though.
I dont understand your comment. sorry... I dont follow the exact thing you did. What is microG? Is that the G-app? And, did you press it or not?
The issue is that i never can open the G-app... So the fact he can open it means its not gonna work for me probably. Because hes procedure at the start is exactly the same as the procedure of red skull... They do both do the exact same things and the only issue i have is not being able to open G-app. And the reason i cant open G-app, is because i need to downgrade BUT the downgrade is xxx.131 and this one doesnt exist for ELS-LGRP6.... So, im still in the same situation as one week ago
theintelligent said:
What I did was to follow RedSkull's guide till account creation and launching of the blue G App (pressing the blue button and let it run in the background), and then I start following the @eloygomezTv guide from that step. Only change I did was before installing the Google Play Services (from EloYGomeZTv files), I uninstalled the microG. And then I followed the guide from EloYGomeZTv with his files and viola, I was able to install it. It took me two tries though.
Click to expand...
Click to collapse
Ok so i fixed everything. GMS is finally working.
There is a new video online on youtube which made it all happen (to install GMS). But first, i had to downgrade ELS-LGRP6 which wasnt easy because nobody new the correct firmware i had to download for this base software. So, i decided to take the earliest firmware i could find, checked if it was OK for my device and then used proxy and hisuite to downgrade to ELS-LGRP6 xxx.132
Then i used this youtube to walk me through. Its amazingly simple and shows everything too.
https://www.youtube.com/watch?v=iWG-9nXfvkA&feature=youtu.be
banana-splits said:
Ok so i fixed everything. GMS is finally working.
There is a new video online on youtube which made it all happen (to install GMS). But first, i had to downgrade ELS-LGRP6 which wasnt easy because nobody new the correct firmware i had to download for this base software. So, i decided to take the earliest firmware i could find, checked if it was OK for my device and then used proxy and hisuite to downgrade to ELS-LGRP6 xxx.132
Then i used this youtube to walk me through. Its amazingly simple and shows everything too.
https://www.youtube.com/watch?v=iWG-9nXfvkA&feature=youtu.be
Click to expand...
Click to collapse
Hello,
Cool for you, i did the same thing as you and it works well, I can open the Play store, youtube and the other apps without problems except for the maps.
Do you have the maps in the apps?
I have no maps displayed but a message telling me “update google play services” and nothing more.
If I open “maps” the app opens and closes quickly.
I do not know why
now I am in LGRP6 10.1.0.144 (C432E2R3P3) and the smartphone offers me to make the updates (I dont do so as not to lose the GMS)
joe.cocs said:
now I am in LGRP6 10.1.0.144 (C432E2R3P3) and the smartphone offers me to make the updates (I dont do so as not to lose the GMS)
Click to expand...
Click to collapse
Who told you can't update your phones firmware?
I have .162 running without problems. Actually, the only problem is that I need to upgrade it manually using hiproxy.
Can you tell me from where did you download your .144 firmware from?
tschertel said:
Who told you can't update your phones firmware?
I have .162 running without problems. Actually, the only problem is that I need to upgrade it manually using hiproxy.
Can you tell me from where did you download your .144 firmware from?
Click to expand...
Click to collapse
hello, I downloaded the .144 firware using the following method:
https://www.youtube.com/watch?v=q2b_lBPc-Hk
I don't update so as not to lose the GMS ?!
joe.cocs said:
hello, I downloaded the .144 firware using the following method:/QUOTE]
Thanks. I'll take a look. :good:
joe.cocs said:
I don't update so as not to lose the GMS ?!
Click to expand...
Click to collapse
You can update the firmware.
Click to expand...
Click to collapse
tschertel said:
joe.cocs said:
You can update the firmware.
Click to expand...
Click to collapse
For my device, the most recent update is .156, can I update by OTA or with hisuiteproxy?
Click to expand...
Click to collapse
joe.cocs said:
For my device, the most recent update is .156, can I update by OTA or with hisuiteproxy?
Click to expand...
Click to collapse
If the phone shows to you an update, do it.
If not, you can use HiProxy.
I have .162 installed on my phone and so far there's no update available.
tschertel said:
If the phone shows to you an update, do it.
If not, you can use HiProxy.
I have .162 installed on my phone and so far there's no update available.
Click to expand...
Click to collapse
previously default version i am having ELS-LGRP6-OVS 10.1.0.168(Huawei p40 pro plus) i downgrade using hisuite and hisuite proxy to lower version and install google apps using googlgfier and after that using hisuite and hisuite proxy i update my phone version to 10.1.0.175 and everything i.e. google apps are working fine .Google map is working fine.
I am having only one problem while installing googlgfier i added 2 google accounts but now i am unable to add google account if anybody is having any solution the pl. help
rakeshmeena7 said:
previously default version i am having ELS-LGRP6-OVS 10.1.0.168(Huawei p40 pro plus) i downgrade using hisuite and hisuite proxy to lower version and install google apps using googlgfier and after that using hisuite and hisuite proxy i update my phone version to 10.1.0.175 and everything i.e. google apps are working fine .Google map is working fine.
I am having only one problem while installing googlgfier i added 2 google accounts but now i am unable to add google account if anybody is having any solution the pl. help
Click to expand...
Click to collapse
I'm wondering if my phone will show an upgrade.
I saw .182 is already rolling out in some countries.
Check using firmware finder and check whether it is approved or not then install it using hisuite
google maps is working fine for me... I just downloaded it to try it out. No problems at all.
joe.cocs said:
Hello,
Cool for you, i did the same thing as you and it works well, I can open the Play store, youtube and the other apps without problems except for the maps.
Do you have the maps in the apps?
I have no maps displayed but a message telling me “update google play services” and nothing more.
If I open “maps” the app opens and closes quickly.
I do not know why
now I am in LGRP6 10.1.0.144 (C432E2R3P3) and the smartphone offers me to make the updates (I dont do so as not to lose the GMS)
Click to expand...
Click to collapse
rakeshmeena7 said:
previously default version i am having ELS-LGRP6-OVS 10.1.0.168(Huawei p40 pro plus) i downgrade using hisuite and hisuite proxy to lower version and install google apps using googlgfier and after that using hisuite and hisuite proxy i update my phone version to 10.1.0.175 and everything i.e. google apps are working fine .Google map is working fine.
I am having only one problem while installing googlgfier i added 2 google accounts but now i am unable to add google account if anybody is having any solution the pl. help
Click to expand...
Click to collapse
sir with version do u downgrade. I downgrade to version 136. Now my phone is soft brick i think. imei null and camera image is upside down phone restart every 40 sec no sound. can u give any idea how to solve it. thanks on advance.
Hassan_786 said:
sir with version do u downgrade. I downgrade to version 136. Now my phone is soft brick i think. imei null and camera image is upside down phone restart every 40 sec no sound. can u give any idea how to solve it. thanks on advance.
Click to expand...
Click to collapse
ELS-LGRP6-OVS 10.1.0.146 i downloaded this firmware.
rakeshmeena7 said:
ELS-LGRP6-OVS 10.1.0.146 i downloaded this firmware.
Click to expand...
Click to collapse
Does any problem occur after downgraded?
Hassan_786 said:
Does any problem occur after downgraded?
Click to expand...
Click to collapse
NO problem at all, my phone is working fine but dual apps are not working

Categories

Resources