Database Develop

[DISCONTINUED][KERNEL][CM][STOCK][4.4.4] Boom Kernel v1.2 [DT2W][S2W][S2S][KitKat]

DISCONTINUED
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this Kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* DO NOT ASK FOR ETA
*/
Click to expand...
Click to collapse
This is for those who are still loving KitKat.
Click to expand...
Click to collapse
Hi,
This is the KitKat version of Boom Kernel, based on the official Google source. Can flash on any Android One device running on 4.4.4 based roms including stock rom. Optimized for performance, stability and improved battery backup.​
Code:
[CENTER]Tool-chain:(crosstool-NG [COLOR=Red]boom-kernel-Linaro[/COLOR] GCC 2014.06-Cortex-A7)4.7.4[/CENTER]
Downloads:
1. See post #2
Features and Change-log:
1. See post #3
How to Install:
1. Download Boom kernel flashable zip
2. Copy it into SD Card
3. Reboot into custom recovery
4. Install zip from SD Card
Credits:
1. varun.chitre15 (for the GPL source)
2. intersectRaven (for the GPL source)
3. Kunal.Kene.1797 (for the GPL source)
4. Agaphetos (for the GPL source)
5. XDA
6. Google
XDA:DevDB Information
Boom Kernel KitKat, Kernel for the OEM Cross Device Development
Contributors
AnoopKumar
Source Code: https://github.com/HelllGuest/boom_kernel_sprout_kk
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: v1.0
Created 2015-06-01
Last Updated 2015-06-09

Downloads
DOWNLOADS​
Boom Kernel v1.0
Boom Kernel v1.2​
​
​

Features and Change-log
Features and Change-log:
Initial Release 2015-06-01
1. Compiled with Linaro GCC 4.7.4 - Cortex-A7 (Boom-Kernel Tool-chain):good:
2. Increased read-ahead to 512kB
3. Dirty ratio tweaks
4. Reduced VFS cache pressure
5. Disabled MMC CRC checking
6. Ext4 speed up
7. Dynamic fsync control
8. Optimized SLUB
9. Disabled GFS and enabled ARCH_POWER
10. NOATIME and NODIRATIME Enabled
11. ThunderQuake Engine
12. Many performance optimization tweaks
13. Improved stability
Second Release 2015-06-09
1. Optimized XZ Compression
2. Added DT2W,S2W and S2S

few minutes ago i downgrade to KK for some reasons
i need this kernel

[LOLLIPOP] [CONDOR] [LINARO 4.9] MaxiKernel 1.2

​
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.*/
MaxiKernel for Moto E (condor)
Hey guys XDA, I come to present MaxiKernel for Moto E (condor)
Features
Compiled from latest sources from CyanogenMod Repo.
Linaro 4.9 optimized for Cortex-A7
DoubleTap2Wake (Only en 1.0 and 1.1 versions)
Low swappiness
Enabled pipe flag
Optimized SLUB
Disable CRC check
Aggressive multi-core power savings
[*]More governors:
Smartmax
Lionheart
Intelliactive
Wheatley
Ondemandplus
Alucard
[*]More I/O Shedulers
[*]VR
[*]Zen
[*]Fifo
[*]Sio
[*]Frandom support
[*]Optimized AES & SHA1 routines
[*]Optimize Sfck Compression
No more dirty in kernel version
Optimized EXT4
Downloads
MaxiKernel 1.0
MaxiKernel 1.1
MaxiKernel 1.2
Bugs
Sensor motion (Only on 1.1 version)
Credits
TechnoAnder - Kernel testing
percy_g2 - For their work on CyanogenMod
XperiAMM and Epirex, members of MaxiCM Team (This kernel is unrelated to MaxiCM , only they gave me an idea for the name.)
Adarsh1998 for the banner
XDA:DevDB Information
MaxiKernel, Kernel for the Moto E
Contributors
NV-Dev
Source Code: https://github.com/Nothing-Dev/MaxiKernel_condor
Kernel Special Features:
Version Information
Status: Beta
Current Stable Version: 1.2
Stable Release Date: 2015-08-28
Current Beta Version: 1.0
Beta Release Date: 2015-08-15
Created 2015-08-16
Last Updated 2015-08-28

Changelog
Code:
First release - 15/08/2015
Add DoubleTap2Wake
Add more governors:
Smartmax
Lionheart
Intelliactive
Wheatley
Ondemandplus
No more dirty in kernel version
Optimized EXT4
MaxiKernel 1.1 - 17/08/2015
Add alucard governor
Use Linaro 4.9 toolchain
Low swappiness
Enabled pipe flag
Optimized slub
Disable CRC check
Aggressive multi-core power savings
[B][COLOR="Green"]Fixed compatibility problem with other ROMs[/COLOR][/B]
MaxiKernel 1.2 - 28/08/2015
Add more I/O Schedulers:
Fiops
VR
Zen
Fifo
Sio
Update adreno.c
Frandom support
Optimized AES & SHA1 routines
Adapted ondemandplus to condor
Optimize Sfck Compression
Removed DT2W

F.A.Q
How active DoubleTap2Wake ?
Open the terminal and place the following
Code:
echo 1 > /sys/android_touch/doubletap2wake

Waiting...

Great work brother, congratulations.

(
TechnoAnder said:
Great work brother, congratulations.
Click to expand...
Click to collapse
Thanks brother

magdeoz said:
Waiting...
Click to expand...
Click to collapse
Ready

Gonna try it soon, any plans on adding LG like KnockCode feature??

Plz compatibility with other roms

I love you. I'm glad you another kernel for the condor . You compiled it with any toolchain ? And d2tw is freezing the screen as in zapdos ?

Will this work with AOSP based roms?
Thanks for brining this for condor.....
Sent from my Moto E using Tapatalk

Great,maybe u can try to add overclock and undervolt?Thanx
STAY ADDICTED!!!

Great work.

Woww, another Kernel for our Device, gotta try now

Unfortunately gave bootloop in slimsaber . If you like to install as the others ( zapdos , phenomenal ) I think it will be compatible with all roms . But since it is already a big project.

Tried on Sokp, Bootloop Aosp roms not supported i think......

Works great on latest AICP 10.0,no issues till now.
STAY ADDICTED!!!

@NV-Dev is this based on Linaro?

-CALIBAN666- said:
Works great on latest AICP 10.0,no issues till now.
STAY ADDICTED!!!
Click to expand...
Click to collapse
Any issues on DT2W????

no,at moment is all running as it should,cool kernel.

[KERNEL]Quantum-V2[6.0.1][ARM64][14-Sep-2016]

Quantum Kernel
Android under power of Quantum​
Disclaimer
Code:
#include
/*
* Your warranty will not void, no warranty is void in YU.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this Kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Description on Quantum Kernel
--- Quantum Kernel is optimized for battery and performance. It contains less feature, for good performance and battery backup only. It is maintained by Hriday Sharma.
If you want Quantum Kernel for other device you can contact the owner of Quantum Kernel. ---
What make this Kernel so unique? -- Have a look below --
- Based on CAF Sources
- Tweaked to show proper naming in About Phone
- Tuned up for ARM64
- CPU Online/Offline management is improved
- In governor you get Darkness Governor
- For fast charging Thundercharge is their.
Installations Steps:-
-- Minimum Requirements To Install Quantum Kernel
Your Device Should be Rooted with Unlocked Boot-loader & Latest Custom recovery Installed.
Recommended Custom Recovery TWRP
WARNING or TIP :-
If you are trying to take backup of boot.img (kernel) from TWRP and restore it before or after flashing then you will soft brick your phone. DON'T try to do this at anytime. Not only for this kernel, i'm talking about all kernel.
1. Boot into TWRP
2. Flash Quantum Kernel ZIP
3. Wipe cache and dalvik
4. Reboot to System
Source Code: Click Here
Do like our Facebook Page: Click Here
Credits:-
- CyanogenMOD
- Codeaurora
- Hriday Sharma
- & All other commiters on Quantum Kernel Source Code
Thank You
Hriday Sharma
XDA:DevDB Information
Quantum Kernel, Kernel for the YU Yureka
Contributors
HridayHS
Kernel Special Features:
Version Information
Status: Testing
Current Stable Version: V2.0
Created 2016-09-15
Last Updated 2017-01-02

Downloads:-
- Quantum Kernel V1 - Click Here
- Quantum Kernel V2 - Click Here
Changelog:-
V1: Initial Release
V2:-
* Android Nougat Support
* LA.BR.1.2.9_rb1.5 branch merged from CAF so expect lots of improvement
* CyanogenMod upstream changes merged ( so Gestures are their)
* MSM Thermal updates
* F2fs update
* Task Scheduler tuned for power saving
* Core control update
* Kernel Version Updated to 3.10.103
* Sdcardfs
* Security update
* Mmc-max-speed(eMMC Block layer simulation speed controls)
* Faux Sound Control V3.5
* Sio Scheduler
* Kcal
* Kexec Hardboot Supported

May i know what is kexec hardboot?

Thread closed due to not being GPL compliant.
OP can PM me when he has kernel source updated.
EDIT: and open again.

[KERNEL][7.1.2] Skatter Kernel-v2 SM-G530P/T/T1/W - 11/21/2017

[size=+1]Welcome to Skatter Kernel forum.[/size]
Today I am very proud to release the Skatter Kernel to you guys, I am going to the my best to base this off of my d2spr kernel.
Features
* Cortex-A53 & Neon optimizations
* Compiled with a cortex-a53 optimized Uber-TC 7.x
* CPU OC to 1612Mhz
* GPU OC to 650Mhz
* Set to Permissive
* Net Speed Tweak
* Decreased time to enter deep sleep
* Quick Wakeup Driver
* Optimized Square Root Algorithm
* Screen Tweaks for filling blank spots with more color
* Adreno Idler v1.1
* Simple GPU Governor
* Fast Idling of Cpus
* Kernel Hz is set to 300
* State Notifier driver
* CPU Unaligned access for better performance
* Enabled Arch_Power for better battery life
* Disabled Samsung's touchboost (Because what would be the point of the governors, right?)
* A good amount of debugging disabled for better battery-life & performance.
* RAM booster on screen-off
* Added a tweak so powersuspend & state_notifier play nice with each other :good:
* Sysfys interface for arch_power & gentle_fair_sleepers (Enable/disable in Kernel Adiutor)
* Performance tweaks
* PDesire Audio 10.1 for very clear audio.
* Fixed a BUNCH of load average. For less CPU cycles. (Improves battery-life)
* Power Efficient Workqueues.
* Ultra Kernel Same Page Merging, to help out a little since we have very little RAM.
Faux123's Features
* Fauxsound version 3.5
* Powersuspend v1.7 modified by me.
* KCAL v2 by Savoca
I/O Schedulers
* BFQ
* CFQ
* Deadline
* Fifo
* FIOPS
* Maple
* Noop (Default)
* Row
* Sio
* Sio-Plus
* TripNDroid
* VR
*Zen
TCP Congestion Algorithm
* Bic
* Cubic
* Highspeed
* Htcp
* Hybla
* Illinois
* LP
* Reno
* Scalable
* Vegas
* Veno
* Westwood (Default)
* Yeah
Hotplugs
* Intelli_Plug v5.2 (Enabled by default)
* Thunderplug v5.4
* AutoSMP
* MSM_Hotplug
* Mako Hotplug
* Bricked Hotplug
* Zen Decision
* Disabled msm_performance
CPU Governors
* Blu Active
* Chill
* Conservative
* Despair
* Interactive (Removed useless crap)
* Lionfish
* Ondemand
* Performance
* Powersave
* Relaxed
* Skateractive
* I will add more when I have time, do not worry my fellow xda members! *
Instructions
1.) Make... a... [size=+1]BACKUP[/size]
* For this kernel, it would just be the boot partition.
2.) Download kernel & copy it to sdcard/internal storage
3.) Select "Install Image" then flash boot.img
4.) Optional, but you'd have to download any root method zip, as the boot.img removes root.
5.) Most importantly, Enjoy :good:
Downloads
Right Here
* If anyone needs a mirror link, just ask and I will upload
Modded Kernel Adiutor
Right Here
Contributors
* A special thanks to @vince2678 for letting me use his kernel source and for his OC GPU & CPU patches
@faux123 for all his awesome features
@neobuddy89 for helping me out with the blu_plug driver
Disclaimer:​
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
*Bugs*​
Code:
* You tell me!
XDA:DevDB Information
Skatter Kernel for Grand Prime, Kernel for the Samsung Galaxy Grand Prime
Contributors
Lonelyskatter12, vince2678
Source Code: https://github.com/vince2678/android_kernel_samsung_msm8916
Kernel Special Features:
Version Information
Status: Stable
Stable Release Date: 2017-04-25
Created 2017-04-25
Last Updated 2017-11-21

SM-G530T: boots fine and I like the features you've added in. Only bug so far is that WiFi doesn't work. It just won't turn on.

L3R0N said:
SM-G530T: boots fine and I like the features you've added in. Only bug so far is that WiFi doesn't work. It just won't turn on.
Click to expand...
Click to collapse
That's weird? What ROM are you running

Lonelyskatter12 said:
That's weird? What ROM are you running
Click to expand...
Click to collapse
LOS 14.1 build 20170409. You're on 7.1.2 but the build I'm using is still 7.1.1. There aren't any builds more recent than 0409 for the TMO as far as I see.

I would like it to be compatible also for LOS 13.0

L3R0N said:
LOS 14.1 build 20170409. You're on 7.1.2 but the build I'm using is still 7.1.1. There aren't any builds more recent than 0409 for the TMO as far as I see.
Click to expand...
Click to collapse
They took the 04142017 build down? I'll see if I can upload it for you later
shente99 said:
I would like it to be compatible also for LOS 13.0
Click to expand...
Click to collapse
I'll see what I can do ?

Wifi error detected Does not connect to the wireless network I'm testing on samsung grand prime g530t1.:fingers-crossed:

Does not boot on XCU G530H running stock 5.0.2... stuck at samsung logo

Welcome to the community!
Good work.

shente99 said:
Wifi error detected Does not connect to the wireless network I'm testing on samsung grand prime g530t1.:fingers-crossed:
Click to expand...
Click to collapse
Reverted back to linux 3.10.49, build will be up later hopefully that fixes it for you guys.
tasnim_tamim said:
Does not boot on XCU G530H running stock 5.0.2... stuck at samsung logo
Click to expand...
Click to collapse
Wrong phone bruh...
Has.007 said:
Welcome to the community!
Good work.
Click to expand...
Click to collapse
And thank you :highfive:

Is the kernel compatible for 7.1.1 and 7.1.2 ??
---------- Post added at 01:21 AM ---------- Previous post was at 01:19 AM ----------
Is the kernel compatible for 7.1.1 and 7.1.2 ??

Reverted back to linux 3.10.49, Lots of new stuff added in enjoy guys.
Please don't be ignorant this is only for SM-G530P/T/T1/W

SM-G530T: WiFi still not working.

I need the last actI need the latest update 14.1 20170414 gprimeltemtr, how can you facilitate it ??:crying:

Lonelyskatter12 said:
Reverted back to linux 3.10.49, Lots of new stuff added in enjoy guys.
Please don't be ignorant this is only for SM-G530P/T/T1/W
Click to expand...
Click to collapse
The wifi issue has to do with a change in the wifi driver from being modular to being built in. Wifi not working for people is not your issue, it's a problem with people running old builds of the ROM.

It will be because I have a previous rom and I need to update, what happens I do not get the updates via ota, nor by the server jenkins ..I'm in the rom 14.1-20170409-nightly-gprimeltemtr_7.1.1 ...

Skatter will have the April 30 kernel?

@Lonelyskatter12 why don't you use AnyKernel instead of boot.img?
It's better and it doesn't touch the ramdisk at all

naimrlet said:
@Lonelyskatter12 why don't you use AnyKernel instead of boot.img?
It's better and it doesn't touch the ramdisk at all
Click to expand...
Click to collapse
Device doesn't support it, it'll boot straight into download mode after flash.

Lonelyskatter12 said:
Device doesn't support it, it'll boot straight into download mode after flash.
Click to expand...
Click to collapse
Any hope for an update to make this compatible with latest builds? It still works except WiFi will not work since they reverted to using modular WiFi as opposed to the built in WiFi module of previous builds.

Triton-kernel [EAS] [Treble] [android-10^][4.9] [Redmi4A | Redmi5A]

Triton-kernel for Redmi4a & Redmi 5a [Treble] [EAS/HMP]
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Triton-kernel is custom or stock kernel for redmi 4a. Based on CAF with stock device drivers and some additional features .Triton now supports linux v4.9 with the flavour named Triton-Storm. Triton kernel has both support for HMP and EAS scheds with different flavours. Triton-Atmosphere Indicates the stock verison of Triton a pure CAF kernel with HMP sched with some modifications for battery and performance and Triton-Ebella Indicates an other stock version kernel with EAS sched with some modifications for battery and performance. And the New Triton-Storm indicates that its based on 4.9 yes linux v4.9 .
Code:
Triton is focused on battery more than performance so it has very least features .
Toolchain - Proton-Clang v12
* Link Time Optimization
* LLVM Polly Optimization
* ld lld support
- Memory Optimizations
- QNS for better charging
- Schedutil governor
- optimized Interactive governer
- optimized cpufreq
- boefla wl blocker
- dts-eagle
- optimized zram
And many more which cant be listed here :)
If you are currently in ROM with 3.18 kernel You need yo flash 4.9-fixes.zip to fix some issues no need if your in 4.9 tree
DOWNLOAD
Support - paypal
Enjoy Triton!
Click to expand...
Click to collapse
XDA:DevDB Information
Triton-kernel [EAS] [Treble] [android-10^][4.9] [Redmi4A | Redmi5A], Kernel for the Xiaomi Redmi 4a
Contributors
Thago
Source Code: https://github.com/Thagoo/platform_kernel_xiaomi_msm8917/tree/tr-4.9-rova
Kernel Special Features: EAS
Version Information
Status: Stable
Current Stable Version: 2.0
Stable Release Date: 2020-04-02
Created 2020-04-03
Last Updated 2020-11-08

New update pushed for Triton-Atmosphere 08/06/2020 (DD/MM/YYYY)
Changelogs
Enable QNS Battery charging driver
Enable cpufreq as default gpu governor untill fix msm-adreno-tz(not using its maximum freq)
Implement optimised IP checksum helpers
Optimized Console FrameBuffer for upto 70% increase in Performance
Use optimized memcmp
Link updated Download " Triton-Atmosphere" above
**************************************
Triton-Storm 4.9 Update Oct 30 2020
Changelogs
* Merge linux stable v4.9.241
* Fix dt2w for goodix touchscreen users
* Fix gpu freq were not showing
* Fix offline leds
* Improvemens for stability
* Merge aosp common android-4.9-q
* Stabilize charging for rolex
* add cpu EAS governor pixel_smurfutil
* Add anxiety i/o scheduler
* Enable more thermal governors
* Set read ahead kb value to 256
* Set low limits as default thermal governor
* TCP westwood is there and default
* Add state notifier driver used by the new cpu governor
* kernel: time: reduce ntp wakeups
* Added support for custom post_boot script adding some modifications by me like (T-Weaks)
* Enable some power saving features.
* Rebased kernel source
* Add blu-schedutil EAS governor and set as default
* Enforce EAS
* Enable Energy model
* Add bfq iosched and set as default for our potato
* Enable and set default tcp Westwood
* Add boefla wakelock blocker
* Improved lz4 and set as default zram compression algorithm
* Add kcal and k lapse
* Nuke sched_boost feature
*******************************
*******************************
Triton-Strom 4.9 Update Oct 31st 2020
Toolchain - Proton-Clang-v12
Changelog
* Fix LED light issue for Redmi 5a
* Undervolt min and max microvolt.
* Set GPU idle timeout to 64 ms
* Add back tps65132 regulator configurations
* mm: Disable readahead by default
* perf: Restrict perf event sampling CPU time to 5%
* sched: Do not use IPIs for remote wakeups if idle
* sched: Allow aggressive remote task interruptions
* sched: Handle remote wakeups on remote CPUs
* block: Queue requests on their origin CPU
Click to expand...
Click to collapse
*****************************************†**************
Triton-Storm
new update released
Nov 07 2020
Unified | Rolex | Riva
- linux v4.9.241
Compiler - Proton clang v12 with LTO, ld.lld and llvm polly optimizations
Changelogs
* Fix previous lags when gaming caused by gpu
* Fix IR blaster for rolex and riva
* Add gpu boost
* BACKPORT: cpuidle: lpm_levels: Wakeup biased cpu
* lpm-levels: Allow enforcing deepest cluster idle state selection
* cpuidle: Add cpuidle_use_deepest_state_mask() helper function
* UPSTREAM: cpufreq: schedutil: Make iowait boost more energy efficient
* cpufreq: schedutil: Use exponential frequency selection
* BACKPORT: mm: fix pageblock heuristic
* UPSTREAM: cpufreq: schedutil: Make iowait boost more energy efficient
Click to expand...
Click to collapse

THUG_O the real thug.

rohitsinha12 said:
THUG_O the real thug.
Click to expand...
Click to collapse
Thank you sir

m4ulana said:
Awesome kernel by pro, awesome dev! :good: Use Triton kernel since Atmosphere version. Keep up the good work! :highfive:
Click to expand...
Click to collapse
Thanks for your support report bugs if you found any

What difference between Atmospher vs. Ebella kernel in battery backup in more detail?

suzver said:
What difference between Atmospher vs. Ebella kernel in battery backup in more detail?
Click to expand...
Click to collapse
I have written it in thread you can read it

Is this kernel compatible with Pixel expierence rom 9? It has very poor SOT (2h). Wonder to flash kernel,to improve sot.

dzincha said:
Is this kernel compatible with Pixel expierence rom 9? It has very poor SOT (2h). Wonder to flash kernel,to improve sot.
Click to expand...
Click to collapse
Yes ,you can backup boot.img if you are unsure about booting and can restore boot.img to revert to old kernel if anything goes

Which one's best for our device? Based on what I've read so far it looks like EAS is the better one

dzincha said:
Is this kernel compatible with Pixel expierence rom 9? It has very poor SOT (2h). Wonder to flash kernel,to improve sot.
Click to expand...
Click to collapse
Yes

Triton-Ebella development discontinued, new versions not planned?

Just for info - tried with crDroid ROM and it does not work. Boots ok (no loop), but many apps stop responding. Nova launcher restarts continuously, making the phone unusable.

suzver said:
Triton-Ebella development discontinued, new versions not planned?
Click to expand...
Click to collapse
Yes, Ebella has discontinued and focusing more on HMP you can get latest build here

Buvarz said:
Just for info - tried with crDroid ROM and it does not work. Boots ok (no loop), but many apps stop responding. Nova launcher restarts continuously, making the phone unusable.
Click to expand...
Click to collapse
Because you are not using the latest version please check whether you using latest version before posting issue with a logcat the latest version of Triton

New update available
Download
Changelog
* Merge tag LA.UM.8.6.r1-04700-89xx.0
* Fix Disable hw navigation dont working (hw navigation was actives even toggles it to disable)
Tester - taseer(goodix) , shieknabil (focaltech)

Thago said:
New update available at telegram
Downloadhttps://t.me/tboxxx/192
Changelog
* Merge tag LA.UM.8.6.r1-04700-89xx.0
* Fix Disable hw navigation dont working (hw navigation was actives even toggles it to disable)
Tester - taseer(goodix) , shieknabil (focaltech)
Click to expand...
Click to collapse
can give a sourceforge link

Redmi 4A abdal said:
can give a sourceforge link
Click to expand...
Click to collapse
[https://sourceforge.net/projects/tr.../download]Triton-Atmosphere-51-2020-08-28.zip - 13.3 MB[/URL]

Thago said:
Triton-Atmosphere-51-2020-08-28.zip - 13.3 MB
Click to expand...
Click to collapse
thanks, i hope it will work for SuperiorOS Phoenix

Triton-Storm 4.9 Update Oct 30 2020
Changelog
* Merge linux stable v4.9.241
* Fix dt2w for goodix touchscreen users
* Fix gpu freq were not showing
* Fix offline leds
* Improvemens for stability
* Merge aosp common android-4.9-q
* Stabilize charging for rolex
* add cpu EAS governor pixel_smurfutil
* Add anxiety i/o scheduler
* Enable more thermal governors
* Set read ahead kb value to 256
* Set low limits as default thermal governor
* TCP westwood is there and default
* Add state notifier driver used by the new cpu governor
* kernel: time: reduce ntp wakeups
* Added support for custom post_boot script adding some modifications by me like (T-Weaks)
* Enable some power saving features.
* Rebased kernel source
* Add blu-schedutil EAS governor and set as default
* Enforce EAS
* Enable Energy model
* Add bfq iosched and set as default for our potato
* Enable and set default tcp Westwood
* Add boefla wakelock blocker
* Improved lz4 and set as default zram compression algorithm
* Add kcal and k lapse
* Nuke sched_boost feature
DOWNLOAD