Database Develop

[ROM][4.4.4][CM11][ARM][x32][Yureka ROM Odexed & De-Odexed]

DO NOT INSTALL THIS IF YOU HAVE UPGRADED TO THE LOLLIPOP BUILD. FOR 32 BIT RECOVERY ONLY.
YU Yureka Official Cyanogen OS Odexed & De-Odexed​
This is the official untouched YU Yureka ROM zip which can be installed from custom recoveries say CWM, TWRP, Philz etc…
Installing ROM from recovery is simpler than installing firmware from fastboot (but if you soft-bricked your phone, flashing firmware may save it yeah but don't flash kk fastboot images in lolliopop fastboot as itl hard brick the device).
Odexed vs De-Odexed?
Odexed firmware is faster and more secure, but a deodexed one gives more modification to freedom, and is the only way possible to change the look and feel of system apks (theming). In actual terms, deodexed ROMs are only slower in the first ever boot, after which they are the same speed as the former ones. Also, deodex doesn’t entail any serious security risks to your device either, and you can be rest assured that the millions of users opting for these aren’t suffering (including me).
Downloads:
Odexed ROM: (DEFAULT)
Yureka_Original_ROM_Odexed
MD5: 7D3BF824F4A0D28DD578084F132DDFD8
De-Odexed ROM:
Yureka_Original_ROM_De-Odexed
It has few Force Close's. I recommend Odexed ROM.
MD5: AE73E1D0C6353E65CD9FBDB103E8631D
How To Install:
i) Place the ROM zip in the device.
ii) Reboot to your Custom Recovery CWM/TWRP/Philz.
iii) Wipe Cache, Data and System.
iv) Install the ROM Zip .
v) No need to flash Gapps, Gapps already present in system by default.
vi) The system is unrooted as its unmodified, so you might wanna install SuperSU for root access. Download and intall SuperSU.
LINK: SuperSU
vii) Reboot.
FOR OTA Updates:
Download fast-boot tools.
Link: FastBoot Tools.
Download Stock Recovey.
Link: recovery-stock.img
Extract fastboot tools and place the stock recovery in it.
Power off your yureka phone.
Hold Volume Up and connect data cable to your computer.
Your device will be in fastboot mode.
In the fastboot folder in your computer, hold shift and right click.
Click on "Open Command Window here".
Type
fastboot -i 0x1ebf flash recovery recovery-s.img
Click to expand...
Click to collapse
[OPTIONAL]To re-lock your boot loader:
fastboot -i 0x1ebf oem lock
Click to expand...
Click to collapse
The process will finish within 5 seconds.
Disconnect USB and power on your yureka.
Your device is now ready to receive OTA updates!
SOURCE:
Device
Kernel
DISCLAIMER: I'm not held responsible if somehow something bad happens to your device. I've tested the ROM in my YUREKA/AO5510/tomato and it works.
XDA:DevDB Information
Yureka Official ROM Odexed & De-Odexed, ROM for the YU Yureka
Contributors
Shivam Kumar Jha
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Unlocked Bootloader, Custom Recovery say CWM, TWRP, Philz etc.
Based On: CyanogenMod
Version Information
Status: Stable
Current Stable Version: Odexed
Stable Release Date: 2015-02-28
Created 2015-02-28
Last Updated 2015-02-28

Screenshots:

Reserved

bro how to flash this properly....
i mean step by step

Good work...

The play store keeps crashing no matter what

sharan565 said:
bro how to flash this properly....
i mean step by step
Click to expand...
Click to collapse
Download the ROM odexed / de-odexed..
Copy it to your device i.e., yureka..
If u dont have a custom recovery like CWM/ Philz/ TWRP flash one.. (see instructions on there respective page)..
reboot to recovery.. ( Enable developer options and enable advanced reboot menu)
now go to wipe menu., select clean to install a new ROM .. (cache, data, system, .android should be wiped)
now select install zip..
there select the ROM you downloaded odexed/ deodexed..
Iqbal641 said:
Good work...
Click to expand...
Click to collapse
sohny said:
The play store keeps crashing no matter what
Click to expand...
Click to collapse
Did you flash Gapp's after installing the ROM??
I'm using the de-odexed one and i never observed any kind of FC's in playstore app..

Shivam Kumar Jha said:
Download the ROM odexed / de-odexed..
Copy it to your device i.e., yureka..
If u dont have a custom recovery like CWM/ Philz/ TWRP flash one.. (see instructions on there respective page)..
reboot to recovery.. ( Enable developer options and enable advanced reboot menu)
now go to wipe menu., select clean to install a new ROM .. (cache, data, system, .android should be wiped)
now select install zip..
im with cwm recovery first wipe factory reset then wipe cache then we have to format system or not
i was installed other roms only i wiped factory reset and installed rom it worked i didnt wiped cache and system
Click to expand...
Click to collapse

A weird question
Will i get official OTA after installing this?? as this is stock...

sharan565 said:
Shivam Kumar Jha said:
Download the ROM odexed / de-odexed..
Copy it to your device i.e., yureka..
If u dont have a custom recovery like CWM/ Philz/ TWRP flash one.. (see instructions on there respective page)..
reboot to recovery.. ( Enable developer options and enable advanced reboot menu)
now go to wipe menu., select clean to install a new ROM .. (cache, data, system, .android should be wiped)
now select install zip..
im with cwm recovery first wipe factory reset then wipe cache then we have to format system or not
i was installed other roms only i wiped factory reset and installed rom it worked i didnt wiped cache and system
Click to expand...
Click to collapse
The updater-script has a command to mount and then format system..
so doing just factory reset is totally fine...
sanjeev7 said:
Will i get official OTA after installing this?? as this is stock...
Click to expand...
Click to collapse
Yes you will..
just make sure the update recovery while OTA is enabled in developer options (by default it is)..
or manually install the stock recovery
Click to expand...
Click to collapse

Shivam Kumar Jha said:
Did you flash Gapp's after installing the ROM??
I'm using the de-odexed one and i never observed any kind of FC's in playstore app..
Click to expand...
Click to collapse
NO I did not flash gapps
I am using the de-odexed rom and playstore was already present, should i flash gapps?

sohny said:
NO I did not flash gapps
I am using the de-odexed rom and playstore was already present, should i flash gapps?
Click to expand...
Click to collapse
Doesnt matter wont work

sanjeev7 said:
Will i get official OTA after installing this?? as this is stock...
Click to expand...
Click to collapse
I guess you will get OTA update but not able to install as the recovery should be stock to install the OTA update

Is this modified?
I mean to ask is this rom modified from stock? if yes are few bugs solved like the headset bug? Atleast a single bug solved would be great, any ways good work dude

sohny said:
Doesnt matter wont work
Click to expand...
Click to collapse
try flashing CM11 gapps..
sanjeev7 said:
Will i get official OTA after installing this?? as this is stock...
Click to expand...
Click to collapse
AndroTech said:
I guess you will get OTA update but not able to install as the recovery should be stock to install the OTA update
Click to expand...
Click to collapse
Exactly..
FOR OTA Updates:
Download fast-boot tools.
Link: FastBoot Tools.
Download Stock Recovey.
Link: recovery-stock.img
Extract fastboot tools and place the stock recovery in it.
Power off your yureka phone.
Hold Volume Up and connect data cable to your computer.
Your device will be in fastboot mode.
In the fastboot folder in your computer, hold shift and right click.
Click on "Open Command Window here".
Type
fastboot -i 0x1ebf flash recovery recovery-s.img
Click to expand...
Click to collapse
[OPTIONAL]To re-lock your boot loader:
fastboot -i 0x1ebf oem lock
Click to expand...
Click to collapse
The process will finish within 5 seconds.
Disconnect USB and power on your yureka.
Your device is now ready to receive OTA updates!
nikhilchandhra said:
I mean to ask is this rom modified from stock? if yes are few bugs solved like the headset bug? Atleast a single bug solved would be great, any ways good work dude
Click to expand...
Click to collapse
Nope its not at all modified..
I''l prepare a custom one using the deodexed ROM as base like this one Link
Which headset bug?? tell me more about this as i did'nt face any headset issue, just one minor issue in AudioFX app..

Headset Bug
Shivam Kumar Jha said:
try flashing CM11 gapps..
Exactly..
FOR OTA Updates:
Download fast-boot tools.
Link: FastBoot Tools.
Download Stock Recovey.
Link: recovery-stock.img
Extract fastboot tools and place the stock recovery in it.
Power off your yureka phone.
Hold Volume Up and connect data cable to your computer.
Your device will be in fastboot mode.
In the fastboot folder in your computer, hold shift and right click.
Click on "Open Command Window here".
Type
[OPTIONAL]To re-lock your boot loader:
The process will finish within 5 seconds.
Disconnect USB and power on your yureka.
Your device is now ready to receive OTA updates!
Nope its not at all modified..
I''l prepare a custom one using the deodexed ROM as base like this one Link
Which headset bug?? tell me more about this as i did'nt face any headset issue, just one minor issue in AudioFX app..
Click to expand...
Click to collapse
The headset bug which some times irritates me to the peaks, the audio routing isnt perfect in stock, i.e even after connecting a headset the sound comes from the speaker and it can be only solved by restarting the mobile. Even though it detects the headset, when i remove the headset the audio will be still routed to headset, i.e no sound from speaker. Again a restart is needed to solve this problem. Is this problem solved? and no headset icon on connecting a headset, any way i use a third party app for that. Is this issue solved in this rom? Do say it.
---------- Post added at 11:56 AM ---------- Previous post was at 11:36 AM ----------
Could some one give me the link of the gapps for odexed rom? Thanq

sanjeev7 said:
Will i get official OTA after installing this??...
Click to expand...
Click to collapse
Shivam Kumar Jha said:
.....Your device is now ready to receive OTA updates!....
Click to expand...
Click to collapse
even if we're running stock de-odexed rom? or do we have to get back on odexed rom?
Shivam Kumar Jha said:
....I''l prepare a custom one using the deodexed ROM as base...
Click to expand...
Click to collapse
please do. and, try and keep it as slim as possible.
i'm sure there are folks who don't use much of g00gle stuff anyway.

problem in deodexed rom
As sohny mentioned in deodexed rom I'm getting messages that playstore, themes and cm account are stopped working. Flashing gapps didnt solved it.

problems in de-odexed
gokuss1234 said:
As sohny mentioned in deodexed rom I'm getting messages that playstore, themes and cm account are stopped working. Flashing gapps didnt solved it.
Click to expand...
Click to collapse
I'm facing the same problems.
get messages that services have stopped working.
Also play store force closes everytime.
Please find a fix for this.

dalvi.nishant9 said:
I'm facing the same problems.
get messages that services have stopped working.
Also play store force closes everytime.
Please find a fix for this.
Click to expand...
Click to collapse
yeah i checked as it wasnt deodexed properly..
cant help this one now as im lollipop now .. cant revert back to x32 kitkat..
y dont u guyz update to lollipop as well?? make d most of ur hardware with x64 lollipop

Huawei P smart TWRP 3.2.1-0 EMUI 8.0 New update 05.06.2018

Huawei P smart TWRP 3.2.1-0 EMUI 8.0​FIG-LX1
Features:
Decryption DATA = works
• MTP and OTG = working
• Backup and Recovery = works
Note:
If you ask for a password to decrypt data
pin-code or password (it's worth it) to enter the screen you need to enter.
fastboot flash recovery_ramdisk twrp_p_smart.img
Автор: @Pretoriano80 XDA
@Pretoriano80 XDA
New TWRP 05.06.2018
fixed mounting problems, I corrected it (added images for firmware, including and here, added sections for wipe and backup).
Download New 05.06.2018
https://drive.google.com/file/d/1U68vtVbVwf4y1EELlOigLS6Wemc0A_P6/view?usp=drivesdk
Download
Stock recovery
https://drive.google.com/file/d/1dFFjCG2xeg9E08SZFA7jC9y21iX1sJgD/view?usp=drivesdk
Installation instructions for twrp
Preliminarily you must enable the factory unlock and unlock the loader.
ADB P SMART is allocated to the disk C better than one files with the image twrp, then start the search in Windows, the command line open from the administrator, then enter the command, but the phone must be in fastboot on the switched off phone, press the volume swing - and connect the cable install drivers, then on the command line write fastboot flash recovery_ramdisk twrp_p_smart.img Enter wait as all the settings, fastboot reboot. Reboot to the system there by clicking the volume swing + should get into TWRP.
DOWNLOAD ADB TWRP
https://drive.google.com/file/d/1GDUfPmDPf6Rp1o0dwdNoSeUC74JZGCiy/view?usp=drivesdk[\HIDE]
DOWNLOAD DRIVERS
[url]https://yadi.sk/d/YTsmimThu5nNK[/url][\HIDE]

Is this the same twrp a reported by ChinHon here?
https://forum.xda-developers.com/general/general/how-to-root-huawei-p-smart-fig-lx1-t3752705

andymore said:
Is this the same twrp a reported by ChinHon here?
https://forum.xda-developers.com/general/general/how-to-root-huawei-p-smart-fig-lx1-t3752705
Click to expand...
Click to collapse
This is a new, updated Recovery TWRP, not as if it's not about ChinHon it. Here, almost everything works, except for the erecovery section.

andymore said:
Is this the same twrp a reported by ChinHon here?
Click to expand...
Click to collapse
This is a new, updated Recovery TWRP, not as if it's not about ChinHon it. Here, almost everything works, except for the erecovery section.

Are there any issues performing wipes / factory resets with this version?

mwarner said:
Are there any issues performing wipes / factory resets with this version?
Click to expand...
Click to collapse
Problems were not observed, reset settings, formatting is working.

with the old Twrp from ChincHon I had many problems FCs but with these I have no problems with AoKP and Ressurection Remix super finally a useful Recovery Thank you for that

Dude, THANK YOU. Every other guide I read for installing TWRP on the P Smart just said to run fastboot flash recovery <filename> and it never worked. Following your instructions has gotten the recovery installed.
Saying that though; I've booted into recovery and all I've got is TWRP splash page. Anyone else had that issue?

noobstyle1337 said:
with the old Twrp from ChincHon I had many problems FCs but with these I have no problems with AoKP and Ressurection Remix super finally a useful Recovery Thank you for that
Click to expand...
Click to collapse
Not at all, if any problems write to me.

Trism said:
Dude, THANK YOU. Every other guide I read for installing TWRP on the P Smart just said to run fastboot flash recovery <filename> and it never worked. Following your instructions has gotten the recovery installed.
Saying that though; I've booted into recovery and all I've got is TWRP splash page. Anyone else had that issue?
Click to expand...
Click to collapse
You put on the official firmware p smart? With the modified kernel, there are some problems with the twrp input.

mak6021 said:
You put on the official firmware p smart? With the modified kernel, there are some problems with the twrp input.
Click to expand...
Click to collapse
Ah, good point. I installed AOSP 8.1 first, then installed TWRP. Any advice on what I can do to get around this? Is there a different version of TWRP I could try?

Trism said:
Ah, good point. I installed AOSP 8.1 first, then installed TWRP. Any advice on what I can do to get around this? Is there a different version of TWRP I could try?
Click to expand...
Click to collapse
I updated twrp in the post look at the beginning of the second link to download. Maybe it will do
.Try in erecovery to install twrp

where do i find the stock recovery if i want to restore it ???
where do i find the stock recovery for the p smart fig la1 if i want to restore it ???

ilyes9999 said:
where do i find the stock recovery for the p smart fig la1 if i want to restore it ???
Click to expand...
Click to collapse
Download
Stock recovery
https://drive.google.com/file/d/1dFFjCG2xeg9E08SZFA7jC9y21iX1sJgD/view?usp=drivesdk
[/QUOTE]

with Resurrection Remix everything works best no Fcs everything top only load lasts 4 hours

fig la1 ?
does it work for fig la1

noobstyle1337 said:
with Resurrection Remix everything works best no Fcs everything top only load lasts 4 hours
Click to expand...
Click to collapse
Honestly I do not know what this download is 4 hours is not very good.
And where to download Resurrection Remix for Huawei P Smart or enjoy 7s?

ilyes9999 said:
does it work for fig la1
Click to expand...
Click to collapse
Yes it works.

mak6021 said:
Honestly I do not know what this download is 4 hours is not very good.
And where to download Resurrection Remix for Huawei P Smart or enjoy 7s?
Click to expand...
Click to collapse
Oh sorry for my Bad english ..Batterie loading is 4 hours it is a bit slow

test assembly, it is possible to solve some problems.
If something does not work, write here.
Download.
https://drive.google.com/file/d/1PSbZCc6UdelMag56kTKVebpajItGtWnM/view?usp=drivesdk

[ROM] [STOCK] [08-Mar] TWRP flashable Stock ROM [v340]

Code:
[B]NOTE : [/B]PROCEED AT YOUR OWN RISK. Guide tested successfully to flash [U]Stock WW-15.2016.1805.309[/U] from AOSP extended (22/06 build) on primary device. Also I will try to help out in case of issues.
If already on Stock Rom then visit THIS THREAD for OTA updates.
This thread is useful for those who want to return to stock ROM from custom ROM while keeping TWRP & unlocked bootloader.
How to ,
Backup all your important app data.
Do a TWRP backup of current ROM. (precautionary step)
Download modified full recovery stock rom - TWRP_Stock_v340.zip from this post.
Download decrypt.zip from HERE.
Reboot to TWRP.
Go to wipe and select swipe to Factory reset.
Flash the ROM file.
Flash decrypt.zip file.
Reboot & Enjoy.
Users coming from Android Pie reported microphone issues - in case you face it then flash DolbyPlus-Oreo_8.1.zip from THIS post via Magisk which might resolve the issue.
(optional) If you want to boost up by debloating then use this MOD.
(optional) If you want to boost up BATTERY then use this GUIDE.
Remember that it takes a lot of time to create , test and upload these huge files for everyones use. So please hit Thanks! button on the bottom right of the post to keep me motivated
NOTE : ROM works independant of RAM i.e. applicable for 3/4/6 GB variants.
Recommended TWRP : https://androidfilehost.com/?fid=3700668719832241089 by @SagarMakhar.

To ROOT the ROM
Flash Magisk from TWRP and you will have root access

Well I am trying to flash this ROM coming from RR but somehow its taking half an hour to encrypt so is it necessary to encrypt can't we just skip it ???
also it did erased TWRP as when I am trying to get in TWRP using volume up + power button its get back to default bootloader that came with mobile .....
also do I have to flash again TWRP again after this to get back root via magisk......

piku2008 said:
Well I am trying to flash this ROM coming from RR but somehow its taking half an hour to encrypt so is it necessary to encrypt can't we just skip it ???
also it did erased TWRP as when I am trying to get in TWRP using volume up + power button its get back to default bootloader that came with mobile .....
also do I have to flash again TWRP again after this to get back root via magisk......
Click to expand...
Click to collapse
Did you performed factory reset and flashed ROM & decrypt.zip
The TWRP survives the flash and Magisk can be flashed to Root the ROM but after above two files are flashed.

Well I successfully flashed ROM after complete factory reset with internal memory tooo ......
But some how TWRP got replaced with factory default (the one with root checker) with bootloader unlocked screen

Thank you. Just updated to latest version from old stock rom. Please update new versions also whenever available

Aftab_khatri said:
Thank you. Just updated to latest version from old stock rom. Please update new versions also whenever available
Click to expand...
Click to collapse
Will do

Thank You bro.. Your Guide has tested successfully from AOSiP build to stock ROM 309.. [emoji16]
Sent from my [device_name] using XDA-Developers Legacy app

AOSP to Stock
Good day, Can I use this method to go back in Stock Rom? Currently using AEX but I can't use my mobile data here in the Philippines, your answer would be a great help, Thank you...
[Update]
Good day mate, just flashed this, and I'm back to stock with root, Thanks Mate for this...

jroviel18 said:
Good day, Can I use this method to go back in Stock Rom? Currently using AEX but I can't use my mobile data here in the Philippines, your answer would be a great help, Thank you...
[Update]
Good day mate, just flashed this, and I'm back to stock with root, Thanks Mate for this...
Click to expand...
Click to collapse
Great .. Sorry could not reply earlier but you got the resolution of the query.
For subseqeunt update with TWRP intact .. please follow this guide in future .. https://forum.xda-developers.com/as...to/rom-update-stock-firmware-keeping-t3808269

Update - WW-15.2016.1805.311
Updated Stock ROM file - TWRP_Stock_v311.zip now avaliable.
For those who are already on stock ROM,
The instructions to flash are in THIS POST.
For those who are on custom ROM,
The instruction to flash are in THIS POST

Do these zips format internal storage or not ??

aadi50 said:
Do these zips format internal storage or not ??
Click to expand...
Click to collapse
No

aadi50 said:
Do these zips format internal storage or not ??
Click to expand...
Click to collapse
I believe this is the exact same firmware as the official one. It is just modified to work with TWRP. Nothing more, nothing less.

aadi50 said:
Do these zips format internal storage or not ??
Click to expand...
Click to collapse
You will have to format data (i.e. factory reset) but the Internal Storage will be safe.

aaa
Work For Max Pro M1 ?
This rom XOOT not XOOTD
---------- Post added at 11:26 AM ---------- Previous post was at 11:07 AM ----------
.A.V.i.n.a.S.h. said:
Code:
[B]NOTE : [/B]Guide tested successfully to flash [U]Stock WW-15.2016.1805.309[/U] from AOSP extended (22/06 build) on primary device. Also I will try to help out in case of issues. BUT still proceed at your own risk.
This thread is useful for those who want to return to stock ROM from custom ROM while keeping TWRP & unlocked bootloader.
How to ,
Backup all your important app data.
Do a TWRP backup of current ROM. (precautionary step)
Download modified full recovery stock rom - Stock_X00T_Patch_May_Version_311_TWRP.zip.
Download decrypt.zip from HERE.
Reboot to TWRP.
Go to wipe and select swipe to Factory reset.
Flash the ROM file.
Flash decrypt.zip file.
Reboot & Enjoy.
(optional) If you want to boost up by debloating then use this MOD.
This will update your firmware to WW-15.2016.1805.311 to have updates after this follow THIS THREAD.
Remember that it takes a lot of time to create , test and upload these huge files for everyones use. So please hit Thanks! button on the bottom right of the post to keep me motivated
Click to expand...
Click to collapse
My Devices Zenfone Max Pro M1 X00TD
This your Rom Not WORKING X00T
Flash to TWRP error TWRP Has Restarting
sory bad english

arielrizuly said:
My Devices Zenfone Max Pro M1 X00TD
This your Rom Not WORKING X00T
Flash to TWRP error TWRP Has Restarting
sory bad english
Click to expand...
Click to collapse
This ROM should work on X00T and X00TD both. Can you please validated checksum again for the downloaded file.

.A.V.i.n.a.S.h. said:
This ROM should work on X00T and X00TD both. Can you please validated checksum again for the downloaded file.
Click to expand...
Click to collapse
I am on stock build 311 and Rom X00TD , i am unable to root or even unlock bootloader on my device.
Tried all methods , on YouTube and xda but all wasted.
Though , i debloated my phone using one of the methods mention in a thread in xda and even installed xda navbar using adb.
Please help.

Abby 244 said:
I am on stock build 311 and Rom X00TD , i am unable to root or even unlock bootloader on my device.
Tried all methods , on YouTube and xda but all wasted.
Though , i debloated my phone using one of the methods mention in a thread in xda and even installed xda navbar using adb.
Please help.
Click to expand...
Click to collapse
Have you checked the drivers if they are installed.
Do one thing .. see if in fastboot .. if you get any responce for fastboot devices command from pc.

.A.V.i.n.a.S.h. said:
Have you checked the drivers if they are installed.
Do one thing .. see if in fastboot .. if you get any responce for fastboot devices command from pc.
Click to expand...
Click to collapse
No response even in fastboot.

Twrp disappeared

after updating to xiaomi.eu 9.5.1 I lost Twrp and can no longer install. any suggestions thanks

Updating stock rom overwrites always recovery so far I know. Reflash TWRP again and you are fine.

baggino said:
after updating to xiaomi.eu 9.5.1 I lost Twrp and can no longer install. any suggestions thanks
Click to expand...
Click to collapse
What twrp are u using before?

derKoder said:
What twrp are u using before?
Click to expand...
Click to collapse
I tried them almost all, maybe the installation procedure is wrong

the procedure I follow is:
1-I install my stock with Miflash
2 - Developer Options
3- Usb debugging
4- fastboot flash etc ..
5- start Twrp - I see the encrypted files,
6- format date
7 - restoration.
* It's correct?
solved

Try using TWRP from LR.Team/wzsx150 which in guide, news discussion forum

[ROM][ONEUI 3.1][A715F]- OneOS

Rom OneOS based A715FXXS7BUJ1
read to all
Hi guys, here I share my ROM for the Galaxy A71, I am not responsible for damaged phones, install at your own risk.
This rom was born from the need to have root or some other modification in stock but Samsung has included many limitations which make it difficult to modify in stock.
Features​
Debloat
vaultkeeper disabled
FRP removed
knox counter at 0 (Samsung Health)
Fingerprint animation changed
optimizations
Google Discover enabled
Dolby without headphones
Apply themes without trial time limit
Deknoxed
Full Edge Lighting (extra effects unlocked)
Secure Folder working
Floating Feature tweaks
Mock Locations
Mock Providers
High Volume Warning (disable)
Secure Flag
Recovery Reboot (this is when you press Reboot and he Reboot to recovery)
Click to expand...
Click to collapse
BUGS: At the moment it has not reported any bug.
Installation:
Extract OneOS ROM with an unzip program
Reboot recovery
Format data
Install ROM as "super" image in TWRP
Flash muiltidisabler
Flash Magisk (optional)
Reboot
Downloads:
Version 1:
Link: Google Drive
Credits: Kernel Source (Link)

Hello from Greece
I try this rom for 2 days . Everything looks fine . I have not any problem.

Thank you very match

ZhandarbekD said:
Rom OneOS based A
Click to expand...
Click to collapse
Please check your PM inbox. Thank you.
-Regards: Badger50 FSM

Getting error 255 when flashing custom rom how to fix

Unable to flash any custom rom due to this error occurring

Here the error

Is it possible to dirtflash with NcX?

How to install ?
I get 255 error on TWRP.

papgr00 said:
Hello from Greece
I try this rom for 2 days . Everything looks fine . I have not any problem.
Click to expand...
Click to collapse
Any bug ?
How i can install ?
I getting 255 error on twrp

josegarcia01 said:
Any bug ?
How i can install ?
I getting 255 error on twrp
Click to expand...
Click to collapse
What TWRP version do you use?

Pupet_Master said:
What TWRP version do you use?
Click to expand...
Click to collapse
Twrp 3.5.1

josegarcia01 said:
Twrp 3.5.1
Click to expand...
Click to collapse
Well you may not like to risk but i feel that the error is due to TWRP not being able to write on the device.
First things first, try to download again the ROM, and don't flash the zip file, but flash the .img file inside.

Pupet_Master said:
Well you may not like to risk but i feel that the error is due to TWRP not being able to write on the device.
First things first, try to download again the ROM, and don't flash the zip file, but flash the .img file inside.
Click to expand...
Click to collapse
I did, tried to flash The img file.
And tried With twrp 3.6 too

josegarcia01 said:
I did, tried to flash The img file.
And tried With twrp 3.6 too
Click to expand...
Click to collapse
It could also be TWRP not being able to access the internal storage to write the ROM.. but im not positive

Pupet_Master said:
It could also be TWRP not being able to access the internal storage to write the ROM.. but im not positive
Click to expand...
Click to collapse
Can you help-me to solve this ?
or, how i can find on the internet ?

josegarcia01 said:
Can you help-me to solve this ?
or, how i can find on the internet ?
Click to expand...
Click to collapse
I think you should try to flash magisk and see if it flash ok
If so, i dont know what the issue is... if it wont flash ok, you will need to format your phone data

Pupet_Master said:
I think you should try to flash magisk and see if it flash ok
If so, i dont know what the issue is... if it wont flash ok, you will need to format your phone data
Click to expand...
Click to collapse
Flash ok, i tried magisk, and multidisabler, both Flash ok.
The system img as a super i get these error.

josegarcia01 said:
Flash ok, i tried magisk, and multidisabler, both Flash ok.
The system img as a super i get these error.
Click to expand...
Click to collapse
Ok, i don't know what is the problem.
Either risk format the phone data (but you will lose everything) and try to flash again... or well... wait for the author to reply.

Pupet_Master said:
Ok, i don't know what is the problem.
Either risk format the phone data (but you will lose everything) and try to flash again... or well... wait for the author to reply.
Click to expand...
Click to collapse
Everytime i tried formating data.
I dont tried withouth format data.