I have been searching for stock firmware for the republic wireless moto x. So far I haven't found anything, and previous versions do not work when flashing with fastboot and mfastboot. If any kind soul could find or extract the SBF files for the LPA23.12-39-R-19 build that would be greatly appreciated.
peacefulness said:
If any kind soul could find or extract the SBF files for the LPA23.12-39-R-19 build that would be greatly appreciated.
Click to expand...
Click to collapse
Hi, can you tell what for exactly do you need it?
s5610 said:
Hi, can you tell what for exactly do you need it?
Click to expand...
Click to collapse
Hi Senior Member S5610,
I'm NOT the original poster @peacefulness. But I'm yet another user of Moto X 2013 (with carrier Republic Wireless). My phone suddenly can not boot. You can read detail description in my post in Republic Wireless forum (https://community.republicwireless.com/message/527954). And this happened to start at one week after the OP wrote this thread.
So, dear S5610, did you hint that you could possibly provide that ROM, after you hear a sound reason? Thanks in advance for your feedback!
rayluo said:
So, dear S5610, did you hint that you could possibly provide that ROM, after you hear a sound reason?
Click to expand...
Click to collapse
Sorry, I don't have it either, but I know how to push system partition on bootloader locked device.
How exactly it can not boot? Did you try to flash kernel, modem? Here is dump from -19.
I'm sure they will release LPA23.12-39-R-19 later, because service facilities need it.
s5610 said:
Sorry, I don't have it either, but I know how to push system partition on bootloader locked device.
How exactly it can not boot? Did you try to flash kernel, modem? Here is dump from -19.
I'm sure they will release LPA23.12-39-R-19 later, because service facilities need it.
Click to expand...
Click to collapse
I know this thread is kind of dead, but if you do know how to push system on a locked device, could you please show me how? Bricked phone while experimenting in fastboot.
Related
QUESTION ANSWERED
I'm unable to install apps from the play store. Tapping install just freezes the play store. I can barely even browse the play store or do anything. Factory reset isn't helping and so far all I've done is unlock bootloader and fastboot boot pure2014sb.zip
What can I do?
Thanks
PS: Does anyone know which firmware on this page is for the US Pure Edition phone? https://motorola-global-portal.custhelp.com/app/standalone/bootloader/recovery-images
Try deleting your Google account and clearing the play services cache and data. Then log back in.
Thanks but I already tried that plus factory resetting. I think the pure2014 screwed it up. I need to find out which stock image is the correct one for the pure edition
fbiryujin said:
Thanks but I already tried that plus factory resetting. I think the pure2014 screwed it up. I need to find out which stock image is the correct one for the pure edition
Click to expand...
Click to collapse
The first one is the one you want. 4.4.4 dev
kcustom11 said:
The first one is the one you want. 4.4.4 dev
Click to expand...
Click to collapse
So I want
MOTO X, GSM Dev Edition: KK-4.4.4-KXA21.12-L1.29.1-2 (Retail) MR4
Click to expand...
Click to collapse
That's a very cryptic name for it. How can you tell them apart?
fbiryujin said:
So I want
That's a very cryptic name for it. How can you tell them apart?
Click to expand...
Click to collapse
Well the other GSM images are older versions of android 4.4,4.2.... The ones at the bottom are for Verizon.
kcustom11 said:
The first one is the one you want. 4.4.4 dev
Click to expand...
Click to collapse
kcustom11 said:
Well the other GSM images are older versions of android 4.4,4.2.... The ones at the bottom are for Verizon.
Click to expand...
Click to collapse
Ok. How can I tell the difference between the GSM 2014 model and the GSM Dev Edition from 2013?
I just want to make sure 1000% that I don't flash the wrong firmware on a brand new device.
Thanks
fbiryujin said:
Ok. How can I tell the difference between the GSM 2014 model and the GSM Dev Edition from 2013?
I just want to make sure 1000% that I don't flash the wrong firmware on a brand new device.
Thanks
Click to expand...
Click to collapse
As far as I can tell they're the same. I couldn't find separate sites for them. On my build I have KXE21 and this one has KXA21. I dont think there is any difference, but im not 100%. There's a rooted image on the android Dev section with the E21.
http://forum.xda-developers.com/showthread.php?p=55776484
kcustom11 said:
As far as I can tell they're the same. I couldn't find separate sites for them. On my build I have KXE21 and this one has KXA21. I dont think there is any difference, but im not 100%. There's a rooted image on the android Dev section with the E21.
http://forum.xda-developers.com/showthread.php?p=55776484
Click to expand...
Click to collapse
So it looks like those file names are different once Motorola finally shares them with you. They are all for ghost, which if memory serves me correctly is the 2013 model.
fbiryujin said:
So it looks like those file names are different once Motorola finally shares them with you. They are all for ghost, which if memory serves me correctly is the 2013 model.
Click to expand...
Click to collapse
Could be. Odd that Motorola would give you the wrong images. This zip has all the moto x 2014 images.
http://forum.xda-developers.com/showthread.php?p=55873592
fbiryujin said:
So it looks like those file names are different once Motorola finally shares them with you. They are all for ghost, which if memory serves me correctly is the 2013 model.
Click to expand...
Click to collapse
Do not flash the images listed on their site yet. The Moto X 2014 images haven't been uploaded on their website yet, Motorola has posted on their forums that their working on it though.
nithin1992 said:
Do not flash the images listed on their site yet. The Moto X 2014 images haven't been uploaded on their website yet, Motorola has posted on their forums that their working on it though.
Click to expand...
Click to collapse
Thanks for the warning. Owning a first gen model, I thought those firmware names looked a little familiar. Motorola's support is extremely lacking this year save for one nice person who talks to /r/MotoX on reddit. I wonder what happened to their support. So far 3 out of 3 support agents (1 chat, 2 phone call) have mistaken my questions about unlocked bootloaders for GSM locks, and had no idea what a bootloader is, until I explained it to them in severely layman's terms. For now I'm back on my first gen since I sadly need Verizon, and I also "need" the unlocked bootloader.
On the plus side before getting the RMA I did fix the issue. It was a bad root attempt. I skipped the pure2014 method and just used TWRP + flashing SuperSU as if it was a first gen. (second gen TWRP of course)
Thanks for all the help though.
Hey everyone, I've got a very serious problem here.
Last week after rooting and unlocking bootloader with motochopper, I tried to swap my external/internal storage.
The partitioning method to mount create a partion and mount worked, but I couldn't replace the mount points of either storage. So i decided to use a scripted method to achieve my goal, that didn't work and I was left with frustration and I ran a script that was supposed to be the last line of the tutorial and my phone instantly went black and I rebooted.
Been stock at AT&T white boot logo ever since.
Trying to use this method HERE but I can't find the stock rom where I need to delete some lines in an xml file.
I have downloaded the BataKang stock AT&T rom but the xml file isn't there and I don't know which way to follow.
I'll have access to a Windows Pc on Monday so am trying to download all required files now and to get the best possible tutorial to flash and return my phone to working other.
Thanks in advance.
Its really hard to find stock firmware for the atrix hd for some reason
LilWonka24 said:
Its really hard to find stock firmware for the atrix hd for some reason
Click to expand...
Click to collapse
Reliable server went down a few days ago. Google moto sbf and you'll find the site
Sent from my ATRIX HD using XDA Free mobile app
palmbeach05 said:
Reliable server went down a few days ago. Google moto sbf and you'll find the site
Sent from my ATRIX HD using XDA Free mobile app
Click to expand...
Click to collapse
Sorry if this is noobish but it just says atrix. Im not sure what model its referring to or if thats important at all.
I have the Mexican Stock ROM. I can upload it, if you want.
Stock firmware request
If someone has stock firmware please upload.
mauchito said:
I have the Mexican Stock ROM. I can upload it, if you want.
Click to expand...
Click to collapse
Yes please upload that mate.
I'd like to keep this phone.
Aingaran said:
If someone has stock firmware please upload.
Click to expand...
Click to collapse
Vally2k said:
Yes please upload that mate.
I'd like to keep this phone.
Click to expand...
Click to collapse
There you go:
https://www.dropbox.com/s/0o0wat2ku..._NII_TA-2-16-release-keys-NII-MX.xml.zip?dl=0
PD. I'm pretty sure that I had answered to this post before... Maybe I'm crazy.
mauchito said:
There you go:
https://www.dropbox.com/s/0o0wat2ku..._NII_TA-2-16-release-keys-NII-MX.xml.zip?dl=0
PD. I'm pretty sure that I had answered to this post before... Maybe I'm crazy.
Click to expand...
Click to collapse
Thanks so much for the upload mate.
Do I have to modify an .xml file with this rom, or is it flash ready?
Vally2k said:
Thanks so much for the upload mate.
Do I have to modify an .xml file with this rom, or is it flash ready?
Click to expand...
Click to collapse
Sorry, I forgot, it's already modified, so just flash directly.
mauchito said:
Sorry, I forgot, it's already modified, so just flash directly.
Click to expand...
Click to collapse
I'll do just that once I get back on the computer.
Thanks for your help mate!
This ROM worked flawlessly, and just want to say thank you for the upload.
Anyone have a link to the stock US version of the AT&T stock ROM? And not the Mexico retail version?
quasihellfish said:
Anyone have a link to the stock US version of the AT&T stock ROM? And not the Mexico retail version?
Click to expand...
Click to collapse
Here you go
ROM needed
Can anyone upload stock roms of atrix hd (AT&T and mexican retail) to mega.co.nz ? all other servers are unreliable and slow in my place.
How to install??
Hello men I am new in this how can I install it, the mexican version, on dropbox??
gnolasco said:
Hello men I am new in this how can I install it, the mexican version, on dropbox??
Click to expand...
Click to collapse
Rsd lite....
Sent from my ATRIX HD using XDA Free mobile app
gnolasco said:
Hello men I am new in this how can I install it, the mexican version, on dropbox??
Click to expand...
Click to collapse
Yes, download and use RSD Lite and flash it. Look up how to do that from the link located in the initial post of the thread.
Thanks
Vally2k said:
Yes, download and use RSD Lite and flash it. Look up how to do that from the link located in the initial post of the thread.
Click to expand...
Click to collapse
Thanks guys!!!!!!!!!
Qinara - Stock Firmwares here..
Hi i hope someone can help me i would like to go back to stock Kitkat after being on CM12 lollipop for a while but i am unsure iff i have downloaded the correct stock rom. Could someone please have a look and let me know iff i have downloaded the correct Rom. This is the rom i downloaded XT1052_RETAIL-EU_4.4.4_KXA21.12-L1.26_54_cid7_CFC_1FF.xml. Before i flashed cm12 i was running Kitkat 4.4.4 and i am in the UK. I intend to do this procedure using Rsdlite.
Make sure you dont downgrade... put your phone in fastboot mode and check the bootloader version of your phone and let me know... AFAIK you Will be ok with the firmware you downloaded... Just take more precautions before flashing through rsd.. REMEMBER NEVER DOWNGRADE or else you will be hard bricked... As long as you dont downgrade and your firmware version matches your carrier you are good to go...
Sent from my ghost using Tapatalk
bootloader
whizinc said:
Make sure you dont downgrade... put your phone in fastboot mode and check the bootloader version of your phone and let me know... AFAIK you Will be ok with the firmware you downloaded... Just take more precautions before flashing through rsd.. REMEMBER NEVER DOWNGRADE or else you will be hard bricked... As long as you dont downgrade and your firmware version matches your carrier you are good to go...
Sent from my ghost using Tapatalk
Click to expand...
Click to collapse
Hi thanks for you interest and reply my bootloader version is 0x30b7
sam0056 said:
Hi thanks for you interest and reply my bootloader version is 0x30b7
Click to expand...
Click to collapse
Ok i think you are all ready and set up to flash the stock firmware, again make sure that your phone is XT1052. And then go ahead and flash that stock firmware... And dont forget to edit the XML file and remove the lines that have "getvar'" written in them.. Save the xml file and flash through rsd.. again take precaution of the Boot loader you dont want to downgrade!
Here is a little heads up or info of boot loader's according to the firmwares for you :
30.70: original 4.2.2
30.71: 4.2.2 camera update
30.B2: 4.4
30.B4: 4.4.2
30.B7: 4.4.4
The order that I've written above is: (Bootolader: Android Version)
So you are on 30.B7 bootloader right now so you can flash 4.4.4 easily... But DONT EVER TRY TO FLASH BELOW 4.4.4...
Good luck mate...
Sent from my ghost using Tapatalk
---------- Post added at 10:44 PM ---------- Previous post was at 10:42 PM ----------
sam0056 said:
Hi thanks for you interest and reply my bootloader version is 0x30b7
Click to expand...
Click to collapse
and let me know if you get success...
Sent from my ghost using Tapatalk
bootloader
Hi how can I be certain i have xt1053 because I can't find any documentation.
sam0056 said:
Hi how can I be certain i have xt1053 because I can't find any documentation.
Click to expand...
Click to collapse
1: Checkout the back side of your moto x.. the model of your device is stamped at the lower back side of your device...
2: Connect your mobile with computer and see what model does it show on the usb mass storage device..
Sent from my ghost using Tapatalk
whizinc said:
1: Checkout the back side of your moto x.. the model of your device is stamped at the lower back side of your device...
2: Connect your mobile with computer and see what model does it show on the usb mass storage device..
Sent from my ghost using Tapatalk
Click to expand...
Click to collapse
Hi their is nothing on the back of my phone to indicate which XT version it is and when i plug it in it just says Moto x.
sam0056 said:
Hi their is nothing on the back of my phone to indicate which XT version it is and when i plug it in it just says Moto x.
Click to expand...
Click to collapse
IF the original motorola back is on the phone, there is some very fine/small print at the bottom of the back. It will have the FCC ID, Model number, etc. It could be hard to see, you might have to tilt/twist the phone so the light shines off it just right, or use a magnifying glass if you're my age.
KidJoe said:
IF the original motorola back is on the phone, there is some very fine/small print at the bottom of the back. It will have the FCC ID, Model number, etc. It could be hard to see, you might have to tilt/twist the phone so the light shines off it just right, or use a magnifying glass if you're my age.
Click to expand...
Click to collapse
Hi thankyou i found it. It is an XT1052 so i guess that firmware should be ok to flash right.
sam0056 said:
Hi thankyou i found it. It is an XT1052 so i guess that firmware should be ok to flash right.
Click to expand...
Click to collapse
What @KidJoe said, that was exactly what i was trying to say which you didn't understand... [emoji14] however let us know if you get success..
Sent from my ghost using Tapatalk
Thanks guys I will attempt to flash it tonight with the firmware i have downloaded thanks again.
Hi as of 10 minutes ago i have had success in flashing the custom firmware 4.4.4 on my moto x and everything is working fine. Thankyou all for the help as i was uncert
Hello guys just to update i have had success in flashing the stock firmware using rsdlite and thankyou for the help you all provided. Their is just one more thing i believe the moto x has been updated to lollipop in the time i was on CM12 . Now that i am back on kitkat is their any way i could get the official lollipop update through normal system update as when i check it is not being offered.
Same here I'd like to get the official lollipop. I have the XT1050, its a weird phone but pretty cool. The latest Android version I have is 4.4.2
Looks like you're ahead, lol
Josephdbrewer25 said:
Same here I'd like to get the official lollipop. I have the XT1050, its a weird phone but pretty cool. The latest Android version I have is 4.4.2
Looks like you're ahead, lol
Click to expand...
Click to collapse
Im surprised i think you should at least be on 4.4.4 by now but perhaps its a carrier restriction. The reason i want lollipop update is because i am now wanting to sell the phone and it will demand a slightly higher value being on the latest software.
sam0056 said:
Im surprised i think you should at least be on 4.4.4 by now but perhaps its a carrier restriction. The reason i want lollipop update is because i am now wanting to sell the phone and it will demand a slightly higher value being on the latest software.
Click to expand...
Click to collapse
I thought that myself but according to Motorola's website Android 4.4.4 hasn't even been release for the XT1050
Plus I don't know what carrier the phone has. There's no carrier label ANYWHERE on the phone
sam0056 said:
Hello guys just to update i have had success in flashing the stock firmware using rsdlite and thankyou for the help you all provided. Their is just one more thing i believe the moto x has been updated to lollipop in the time i was on CM12 . Now that i am back on kitkat is their any way i could get the official lollipop update through normal system update as when i check it is not being offered.
Click to expand...
Click to collapse
the official android lollipop update for the Moto X (2013) hasn't been released world wide... You have to wait for motorola to release it for your model of X..So just wait for the Update to pop up it self... And if you got successful you could appreciate us by hitting the "Thanks Button" on our posts which helped you get through your problem
Sent from my ghost using Tapatalk
whizinc said:
the official android lollipop update for the Moto X (2013) hasn't been released world wide... You have to wait for motorola to release it for your model of X..So just wait for the Update to pop up it self... And if you got successful you could appreciate us by hitting the "Thanks Button" on our posts which helped you get through your problem
Sent from my ghost using Tapatalk
Click to expand...
Click to collapse
But of course.
sam0056 said:
But of course.
Click to expand...
Click to collapse
I installed Cyanogenmod 12. Not sure if I'm keeping just yet. I'll be listening to music then BAM!! the phone reboots. Maybe it's fix now I haven't got the latest Nightly..
Josephdbrewer25 said:
I installed Cyanogenmod 12. Not sure if I'm keeping just yet. I'll be listening to music then BAM!! the phone reboots. Maybe it's fix now I haven't got the latest Nightly..
Click to expand...
Click to collapse
I am familiar with this issue it used to happen to me too sometimes. CM12 is very good but i think because their is not a stable release yet their are still some little glitches. Otherwise most of the time it works really well and very customisable. Iff i wasnt going to sell my phone i would have definetly stayed with cm12 their doing a great job.
******REPOSTED*****
******REPOSTED*****
******REPOSTED*****
OLD THREAD > https://forum.xda-developers.com/moto-x4/help/moto-x4-reads-0-imei-t3897098/page2
Posted over 2 weeks ago :'(
PLEASE SHARE AROUND IF SOMEONE WOULD KNOW THE ANSWER
OTHERWISE WHATS THE XIOMI MI MIX 3 LIKE.?. IS THE 5G VARIANT FAR OFF?
Thanks GitHub coders
Hello XDA Fam, I've come to you for help.
Before it is asked, I did search around forums/threads but I really do have a hard time navigating around this site. And from what I seen there was no answers that I needed. Currently my Moto X4 XT1900-7 which I believe is on a factory image, no longer connects to my carrier. It is able to tell me the actual carrier but that's about it. The reason why I ask is because I'm on a completely stock image that's been updated via OTA.
I believe I lost my IMEI, carrier connection ( call it what you will) and orientation ( when you rotate your phone) after flashing this rom https://forum.xda-developers.com/moto-x4/development/rom-pixel-experience-t3876195.
Since then I've been lost. Please if anyone has a recent up to date fix for this I'd be very keen to hear from you.
I've heard of injecting the IMEI, and tried but some guide I followed on XDA was unclear. And I'm not even sure if it would fix anything .. So again if you have a clear up to date guide on this, I'd be very appreciative.
Thankyou for your time to read through. Any info you may need I can try and provide. I hope that I haven't upset anyone with posting this in the wrong section. Or the fact that it's been asked before. If so you could attach a link for me to follow
Which ROM are currently on? Stock or any other? Also give your device model name(eg. XT1900-2 in my case)
-----EDIT-----
Sorry didn't read the whole problem. What is Device Model? (XT1900-2,XT1900-4,XT1900-7)
Did you try flashing the Stock ROM again?If not, grab one from this link - https://mirrors.lolinet.com/firmware/moto/payton/official/RETAIL/
AgentDivanshu said:
Which ROM are currently on? Stock or any other? Also give your device model name(eg. XT1900-2 in my case)
-----EDIT-----
Sorry didn't read the whole problem. What is Device Model? (XT1900-2,XT1900-4,XT1900-7)
Did you try flashing the Stock ROM again?If not, grab one from this link - https://mirrors.lolinet.com/firmware/moto/payton/official/RETAIL/
Click to expand...
Click to collapse
@AgentDivanshu hello friend
Yes I have XT1900-7 stock rom As in 7.1.1? I flashed both 8.1 and 9.0 from that lolinet site
Thanks
GossipGoot said:
@AgentDivanshu hello friend
Yes I have XT1900-7 stock rom As in 7.1.1? I flashed both 8.1 and 9.0 from that lolinet site
Thanks
Click to expand...
Click to collapse
You can try doing -
Flashing the firmware again(stock), then try locking and unlocking the bootloader again, then, installing PE or HavocOS or any other ROM you like.
Just give it a try!
Regards,
SkuzzyTech
SkuzzyTech said:
You can try doing -
Flashing the firmware again(stock), then try locking and unlocking the bootloader again, then, installing PE or HavocOS or any other ROM you like.
Just give it a try!
Regards,
SkuzzyTech
Click to expand...
Click to collapse
Cheers for the quick replys. Is the rom part necessary after locking/unlocking bootloader?
GossipGoot said:
Cheers for the quick replys. Is the rom part necessary after locking/unlocking bootloader?
Click to expand...
Click to collapse
@SkuzzyTech are you familiar with GitHub coding?
@SkuzzyTech are you familiar with GitHub coding?
Click to expand...
Click to collapse
Nope, I don't use Github much
Cheers for the quick replys. Is the rom part necessary after locking/unlocking bootloader?
Click to expand...
Click to collapse
At least you should give it a try!
SkuzzyTech said:
Nope, I don't use Github much
At least you should give it a try!
Click to expand...
Click to collapse
Yeah I suppose
The moto g4/g4 plus suffer from a similar issue. Couple threads from their xda forum. Seems some can solve it and some can't.
https://forum.xda-developers.com/moto-g4-plus/how-to/solve-moto-g4-plus-one-imei-fp-sensor-t3800410
https://forum.xda-developers.com/moto-g4-plus/how-to/guide-moto-g4-plus-imei0-issue-t3859068
Eh I've moved on to flagship phone
can anyone give me the stock rom for moto e5 nora in this version "XT1944-4_NORA_ROW_RETBR_8.0.0_OPP27.91-176-11-2"?
BrenoFarias said:
can anyone give me the stock rom for moto e5 nora in this version "XT1944-4_NORA_ROW_RETBR_8.0.0_OPP27.91-176-11-2"?
Click to expand...
Click to collapse
https://mirrors.lolinet.com/firmware/moto/nora/official/RETBR/
I found this repo of firmwares when looking for mine (1921-3)
Hope this helps, I am not 100% if it's the correct one, but i think it might at least get you started.. I'd probably start with the oldest one and see if that works, then try an OTA update.
You gonna flash it piece by piece via fastboot?
This thread may also be helpful, and might have more about your specific brick. Good luck!
https://forum.xda-developers.com/moto-e5/how-to/firmware-moto-e5-xt1944-4-dual-sim-t3820901
I am looking for the same firmware seems to be an update ota so it is not anywhere I hope a good Samaritan can publish it
brenofarias said:
can anyone give me the stock rom for moto e5 nora in this version "xt1944-4_nora_row_retbr_8.0.0_opp27.91-176-11-2"?
Click to expand...
Click to collapse
+1 opp27.91-176-11-2