TWRP wont run on P9 - Huawei P9 Questions & Answers

I recently installed twrp eva 3.0.2 on my P9 L19C636 but it wont boot into twrp. It gets stuck on your device is booting now.
Thanls

Not every recovery can run on any firmware. If you are on the newest firmware (N) try the newest TWRP 3.1.0-0.

christopherpfister said:
Not every recovery can run on any firmware. If you are on the newest firmware (N) try the newest TWRP 3.1.0-0.
Click to expand...
Click to collapse
OMG Thanks So much! Ive been trying for about 10 hours now and finally success! Thanks!!

christopherpfister said:
Not every recovery can run on any firmware. If you are on the newest firmware (N) try the newest TWRP 3.1.0-0.
Click to expand...
Click to collapse
But i need one more help. Which superuser should i install for my phone (nougat)

sncuber22 said:
But i need one more help. Which superuser should i install for my phone (nougat)
Click to expand...
Click to collapse
For stock rom try the newest superuser or if it doesn't work the pre-rooted boot image from this forum. (flashed via fastboot)
For me I had no success with the superuser install for some reason but the boot image worked.

Related

Latest TWRP?

Guys, what would be the latest TWRP for our SM-G920T, and where would I find an Odin-flashable TWRP file? (Somehow I do not trust TWRP Manager with the task of flashing TWRP.)
Just in case it matters, I am currently rooted on the latest DOI1 FW.
Aqua1ung said:
Guys, what would be the latest TWRP for our SM-G920T, and where would I find an Odin-flashable TWRP file? (Somehow I do not trust TWRP Manager with the task of flashing TWRP.)
Just in case it matters, I am currently rooted on the latest DOI1 FW.
Click to expand...
Click to collapse
https://dl.twrp.me/zeroflte/
datdirtyscrew said:
https://dl.twrp.me/zeroflte/
Click to expand...
Click to collapse
Thank you! One of the things that I find irritating about TWRP Manager is that it asks me to confirm/verify the partition where TWRP gets flashed to. Now how can I possibly know if dev/block/platform/15570000.ufs/by-name/RECOVERY is the right place for my device? (Is it?) The second thing that bothers me about TWRP Manager is that it doesn't correctly detect the latest TWRP version, and often it offers to install an older version.
Did twrp-2.8.7.2-zeroflte.img.tar work for you?
After updating to DOI1, I get boot loops after trying to flash TWRP.
I can get into recovery and download mode just fine, but it won't boot to the OS.
RiskPrime said:
Did twrp-2.8.7.2-zeroflte.img.tar work for you? After updating to DOI1, I get boot loops after trying to flash TWRP. I can get into recovery and download mode just fine, but it won't boot to the OS.
Click to expand...
Click to collapse
I bit the bullet eventually (sesing as flashing TWRP via ODIN is a PITA), and flashed TWRP using TWRP Manager. I got an error message upon flashing, though it looks like TWRP flashed just fine. (Go figure!) Anyway, TWRP Manager flashes TWRP 2.8.7.1. It may be that TWRP people didn't consider TWRP 2.8.7.2 safe enough to flash, which is why TWRP Manager doesn't offer the option. That may be your explanation for your troubles.

Huawei honor 4x Marshmallow rooting

Marshmallow beta update already out for selected users. but root access still not available. supersu /superuser not working. but TWRP latest worked
any idea how to root marshmallow version..
Honor 4x devs plz help us root official emui 4 android m, latest twrp is working fine but rooting failed
Sent from my Che1-L04
I would also really appreciate a method of rooting this phone on Marshmallow.
I did test every SuperSU version in my phone but didn't work out
Twrp is working correctly but SuperSU.....????d
Hello if you have issues just install latest CW 13 Build it is pre rooted!
Try this
I tried and failed
This website is in Arabic use Google translate and try
ir-mob*ir %12162*html
Replace * with . and % with /
Flash this zip in TWRP to root Marshmallow: https://www.androidfilehost.com/?fid=24591000424939898
hackslash said:
Flash this zip in TWRP to root Marshmallow: https://www.androidfilehost.com/?fid=24591000424939898
Click to expand...
Click to collapse
Thank you @hackslash
Tried it,But it didn't work for che1-l04
Sent from my Che1-L04 using XDA-Developers mobile app
tuiyaan said:
Thank you @hackslash
Tried it,But it didn't work for che1-l04
Sent from my Che1-L04 using XDA-Developers mobile app
Click to expand...
Click to collapse
Did the zip flashed successfully or it gave you a flashing error in TWRP. Remember, that in order for the zip to work, you must be on clean stock ROM which hasn't been attempted to root before.
hackslash said:
Did the zip flashed successfully or it gave you a flashing error in TWRP. Remember, that in order for the zip to work, you must be on clean stock ROM which hasn't been attempted to root before.
Click to expand...
Click to collapse
flashed the zip in fresh stock ROM(restored via TWRP)
no error message was displayed.
anyone else please try it and report for model che1-l04
sorry for spam but it is a matter of life and death
http://forum.xda-developers.com/honor-4x/help/help-bricked-device-honor-4x-che2-l12-t3457722
PLEASE HELP ME
nothing seems to be working
None of the super user apps are working,
get the message "patching sepolicy" failure,
When flashing in twrp..
hackslash said:
Did the zip flashed successfully or it gave you a flashing error in TWRP. Remember, that in order for the zip to work, you must be on clean stock ROM which hasn't been attempted to root before.
Click to expand...
Click to collapse
did the flashing of 1.zip again on clean stock rom
got following error :
patching sepolicy
--failure aborting
tuiyaan said:
did the flashing of 1.zip again on clean stock rom
got following error :
patching sepolicy
--failure aborting
Click to expand...
Click to collapse
Flash stock boot.img and then flash the zip. The boot image currently on your device is already patched hence you're facing this error.
hackslash said:
Flash stock boot.img and then flash the zip. The boot image currently on your device is already patched hence you're facing this error.
Click to expand...
Click to collapse
tried it still results are same
is rooting MM emui4 for che1-l04 not possible?
is this impossible to achieve?
hackslash said:
Flash this zip in TWRP to root Marshmallow: https://www.androidfilehost.com/?fid=24591000424939898
Click to expand...
Click to collapse
how to install twrp ?
``
ElmohandsX said:
how to install twrp ?
``
Click to expand...
Click to collapse
You can find guides on xda, just search
can any one help ?
boot.img for mm che1-l04 is in link
please use it find a method to root .
https://www.dropbox.com/sh/mcfikgdow56z6g4/AADJt5NzYIpxB4ZlcDrqllO9a?dl=0

TWRP not installing

Hey folks,
I've been trying to install TWRP on my Mi5, MIUI 8 Global 7.1.19 Beta, and I cannot, for the life of me, get it to work.
I've tried the standard method via Fastboot, which boots into TWRP but then defaults back to the standard Xiaomi recovery when I reboot. I've scoured the MIUI forums and these forums here and tried the solutions suggested, such as the Cofface.img and Flasher toolkit (When using the toolkit it says it has completed successfully and says "you are now in TWRP xxxxx" but the device remains in Fastboot mode and doesn't even reboot) etc., but none of them work! Each and every time the device falls back to the standard recovery and I'm left with more grey hair.
Does anyone know of any other solutions or ideas?
Thanks in advance.
What TWRP version ?
Did you try the modified version that is available in the miUI forum? xz.. something...
There is also a guide for it (on the miUI).
glogal said:
What TWRP version ?
Did you try the modified version that is available in the miUI forum? xz.. something...
There is also a guide for it (on the miUI).
Click to expand...
Click to collapse
Cheers for the info, mate. Yes, I've tried the modded version (the cofface version and TWR 3.0.2.X), 3.0.2.1. wouldn't open when I was able to boot into it (once), it just stuck at the splash screen and 3.0.2.0 won't even boot, let alone install.
Cheers mate!
TWRP is now at 3.0.2-3
This is the webpage (official twrp site):https://twrp.me/devices/xiaomimi5.html
The modified version is the ZCX-TWRP: http://en.miui.com/thread-364569-1-1.html
Thanks! I managed to boot into 3.0.2-3 to flash the EU ROM I wanted. I'll have a quick reboot now and see if the recovery has stuck.
Edit
Yep. I managed to boot into 3.0.2-3, install the ROM and the recovery is fine too. Cheers, man. I appreciate the help.
Same problem...
Console tells me everything is well but there is no twrp... Tryed newest version.
Never mind. Had to boot into TWRP as a last step.
"adb reboot recovery"

Can't install TWRP after updating to Nougat

I recently updated my EVA-L09 to Android 7.0. Before that, I was rooted and I had TWRP. After I updated, I obviously would need to install TWRP and root again, but when I install it with SRK Tool or even with fastboot, it always goes back to stock recovery. I already tried to flash it by "recovery.img" as well.
Gutito said:
I recently updated my EVA-L09 to Android 7.0. Before that, I was rooted and I had TWRP. After I updated, I obviously would need to install TWRP and root again, but when I install it with SRK Tool or even with fastboot, it always goes back to stock recovery. I already tried to flash it by "recovery.img" as well.
Click to expand...
Click to collapse
that would be because the TWRP in SRK Tools is only for android 6 (EMUI 4.1 - 4.1.1) and not for android 7 (EMUI 5 - 5.1)
the recovery that you need to use in order for twrp to be installed is this one https://github.com/OpenKirin/android_device_huawei_eva/releases/download/3.1.0/twrp-3.1.0-0-eva.img
then once its installed boot up your phone and then type in "adb reboot recovery" and that will then boot your device into TWRP 3.1.0.0
Thank you, it worked!
Another question, but now related to SuperSU.
I am with the 2.79 version of SuperSU and I downloaded the binary .zip of this version and flashed it by twrp. The problem is that it keeps saying ""There is no SU binary installed and SuperSU cannot install it. This is a problem!".
I already got it to work. Thanks btw
Gutito said:
I already got it to work. Thanks btw
Click to expand...
Click to collapse
Could you post how perhaps? I had the same problem as you - the TWRP posted about fixed my first problem but now I can't get SuperSU to install either. Would be interested to know how you fixed it!
kzip said:
Could you post how perhaps? I had the same problem as you - the TWRP posted about fixed my first problem but now I can't get SuperSU to install either. Would be interested to know how you fixed it!
Click to expand...
Click to collapse
I solved it by this post https://forum.xda-developers.com/showpost.php?p=70927601&postcount=456
I ended up not using super su but If you want you can use it instead of the one suggested there
By flashing the file provided in the post, I managed to automatically get access to super user (root)

cant boot twrp

Im trying to install the ressurection remix rom, and i downloaded twrp 3.1.1-1 from the site, but it wont boot. just stuck at the TWRP logo..?
xSpartacusx said:
Im trying to install the ressurection remix rom, and i downloaded twrp 3.1.1-1 from the site, but it wont boot. just stuck at the TWRP logo..?
Click to expand...
Click to collapse
you can boot with the older version. 3.1.1.0
kewlzter said:
you can boot with the older version. 3.1.1.0
Click to expand...
Click to collapse
ye i found that out after the fact. alls good.
I was able to install working twrp on mine. It is a patched version by "Jleeblanch". https://androidfilehost.com/?w=files&flid=294840
I downloaded and installed the zip through fastboot boot of 3.3.3-0 which works fine but even the Sept version of 3.3.3-1 hangs for more than 5 minutes. For the life of me I can't figure out how to flash the img of 3.3.3-0 directly to the phone.

Categories

Resources