Hi Guys
A friend buyed this phone but it came with the Typycal ROM installed by e-shop with a lot of advertising, bad translation...
Now I have downloaded the last official stock firmware but now I am looking for a guide about how to unlock the bootloader, install a recovery and flash the ROM.
Is there any Guide here?
Thanks in advance
Each ROM and TWRP has a description and how to start..
So I estimate you did not read any thread of the related folder, right ?
https://forum.xda-developers.com/le-2/development
Start with TWRP and if this is installed you can go further
Related
hello there xda users
i have recently bricked my phone and managed to reflash the firmware, but, i had to add the bootloader file with the split firmware package.
what i want to do is install the latest XXLD3 firmware on top of the current s5830ixxkk5/gingerbread.xxlk1 firmware package but im worried because i am thinking that the bootloader file has to be the same as the firmware if you know what i mean. can i install the xxld3 on the xxkk5 bootloader without bricking my phone again? any help would be appreciated. thanks
[TUTORIAL] Installation GUIDE | ROM List & REVIEWS | Unbrick(Error Mount) [9/9/2012]
kierantheking said:
hello there xda users
i have recently bricked my phone and managed to reflash the firmware, but, i had to add the bootloader file with the split firmware package.
what i want to do is install the latest XXLD3 firmware on top of the current s5830ixxkk5/gingerbread.xxlk1 firmware package but im worried because i am thinking that the bootloader file has to be the same as the firmware if you know what i mean. can i install the xxld3 on the xxkk5 bootloader without bricking my phone again? any help would be appreciated. thanks
Click to expand...
Click to collapse
First of all this development section......
for queries u should have gone to other thread.......
As far as flash is concerned ....... i think u can... i am not pretty much sure but i think so.
but if u need a bootloader file go to unbrick tutorial of mine and download the package for unbrick... take the bootloader file from there..... its from xxld
kierantheking said:
hello there xda users
i have recently bricked my phone and managed to reflash the firmware, but, i had to add the bootloader file with the split firmware package.
what i want to do is install the latest XXLD3 firmware on top of the current s5830ixxkk5/gingerbread.xxlk1 firmware package but im worried because i am thinking that the bootloader file has to be the same as the firmware if you know what i mean. can i install the xxld3 on the xxkk5 bootloader without bricking my phone again? any help would be appreciated. thanks
Click to expand...
Click to collapse
Use ODIN flash YOUR stock rom csc/pda/modem to wait till it boots, after that go to download mode again and just flash pda of XXLD3 using ODIN again. For flashing you dont need the bootloader use ODIN 1.84. I change my WHLA1 to XXLA2 just by flashing the pda of xxla2
And by the way remember what feetsonfire said, this queries need to be on general section not in development
Sorry for my noobish question, but i just buy today an old stock rom P9 and want to make a complete custom and I read much but want to be sure about 2 or 3 things
I have read about unbranded phone, how can I know that
is the procedure to root and install TWRP is the same with my firmware and 6.0 rom, because I find a lot of tutorial about 6.0 root but none for 7.0
if yes, I have to unlock bootloader, root and install TWRp and that'it???
that's my first Huawei and I'm on Samsung since too much time
thank's for the help
It's seem that 7.0 rom have big drain...Is 6.0 is less drain or have I to install different kernel to solve it????
Hi all,
I need your help, i try to flashing stock rom but i'm lost with the P9.
I have unlocked bootloader, flashed B383 stock by TWRP and it buggy a lot.
Hi suite says i can't flash my phone, no rom match.
So how i can flash stock rom for a full and fresh install?
On a EVA-L09.
I modify smartphone since android 1.6 but is the first time i'm verry lost, somewone can help me please?
GITS-SAC said:
Hi all,
I need your help, i try to flashing stock rom but i'm lost with the P9.
I have unlocked bootloader, flashed B383 stock by TWRP and it buggy a lot.
Hi suite says i can't flash my phone, no rom match.
So how i can flash stock rom for a full and fresh install?
On a EVA-L09.
I modify smartphone since android 1.6 but is the first time i'm verry lost, somewone can help me please?
Click to expand...
Click to collapse
Rollback to Marshmallow
https://forum.xda-developers.com/p9/how-to/rollback-eva-l19-android-7-0-emui-5-0-t3496091
Hello
I got an Huawei P9 Lite (VNS-31) and it had a Vodafone Branding.
Original Software was VNS-L31C02B347.
I was trying to install the VNS-L31C432Bxx but it fails.
Then i Unlocket the Bootloader and Rooted the Phone.
My next try was the same i can't install the C432 on this Phone.
After that i try to install oeminfo from a custom after than the phone doesn't start to boot to the EMUI.
I tried to install a custom Frimware with DC Unlocker.....Finished but the phone have no OS.
At his momet i the Phoe is FPR unlocked and Bootloader unlocked
Tthe Internal Storage Shows 0 MM and Cust 495MB in TWRP
I have access to TWRP and to FastBoot.
What can i do to fix that and to install the C432 or for example CyanogenMod or LineageOS.
Thx
anita98558 said:
Hello
I got an Huawei P9 Lite (VNS-31) and it had a Vodafone Branding.
Original Software was VNS-L31C02B347.
I was trying to install the VNS-L31C432Bxx but it fails.
Then i Unlocket the Bootloader and Rooted the Phone.
My next try was the same i can't install the C432 on this Phone.
After that i try to install oeminfo from a custom after than the phone doesn't start to boot to the EMUI.
I tried to install a custom Frimware with DC Unlocker.....Finished but the phone have no OS.
At his momet i the Phoe is FPR unlocked and Bootloader unlocked
Tthe Internal Storage Shows 0 MM and Cust 495MB in TWRP
I have access to TWRP and to FastBoot.
What can i do to fix that and to install the C432 or for example CyanogenMod or LineageOS.
Thx
Click to expand...
Click to collapse
Hello dude,
so you want to REBRAND your phone..
You can do this but you need some files and a correct procedure...
First you need to use a working TWRP, so download and use 3.1.1-1 version...
Check DATA partition, it should be ext4, if not, convert it and format it.
To rebrand you need correct L31C432oem.zip single/dual sim file (depend on your phone)
and need a correct L31C432 single/dual sim firmware.
You have to use a correct procedure you can find here into xda, just search
how to rebrand... or.... take a look into my posts....
To flash a custom rom, just follow the steps suggested in each thread...
Let me know if you need particular help and if i can i will help you...
Cheers
Dadditz said:
Hello dude,
so you want to REBRAND your phone..
You can do this but you need some files and a correct procedure...
First you need to use a working TWRP, so download and use 3.1.1-1 version...
Check DATA partition, it should be ext4, if not, convert it and format it.
To rebrand you need correct L31C432oem.zip single/dual sim file (depend on your phone)
and need a correct L31C432 single/dual sim firmware.
You have to use a correct procedure you can find here into xda, just search
how to rebrand... or.... take a look into my posts....
To flash a custom rom, just follow the steps suggested in each thread...
Let me know if you need particular help and if i can i will help you...
Cheers
Click to expand...
Click to collapse
Thank you for your help.
twrp-3.1.1-0-venus installed and Internal Storage repaired !
How to find the files for Flashing ?!
I have single SIM.
I think i must Flash with twrp because i have no OS in this moment on this phone.
thx
anita98558 said:
Thank you for your help.
twrp-3.1.1-0-venus installed and Internal Storage repaired !
How to find the files for Flashing ?!
I have single SIM.
I think i must Flash with twrp because i have no OS in this moment on this phone.
thx
Click to expand...
Click to collapse
Hey, i am glad to help other users..
About twrp, i would use 3.1.1-1 by HassanMirza01, just to stay safe...
So download and install it from HERE.
Do your backups and delete all safeties first... (fingerprints/pattern/pin)
Visit THIS thread, post #15 that's literally the same files and procedure as yours.
Read carefully before do anything !!
Hello, I hope someone can help me.
Next week I will receive a device from China, for obvious reasons it will have Chinese ROM
I need you to help me not to ruin the device. I want to unlock bootloader and install Xiaomi.eu
I read that there is a TWRP post, but should I update the firmware first before installing Xiaomi.eu or can I install Xiaomi.eu directly?
Thanks for reading and for your help, sorry for being a newbie.
Just read this post: https://forum.xda-developers.com/t/rom-miui-zeus-xiaomi-eu-rom-for-xiaomi-mi-12-pro.4400035/
Unlock bootloader(waiting 168 h).
https://c.mi.com/thread-1857937-1-1.html
https://en.miui.com/unlock/index.html
install Xiaomi EU ROM
If the bootloader is already unlocked, start installing a global stock rom without re locking the bootloader.
https://forum.xda-developers.com/t/flash-tool-guide-use-xiaomi-flash-tool.4262425/post-84843979
2 possibilities:
old rom in Fastboot zip.
To install with a pc then install the TWRP and update via OTA.
Last in zip.
Install with TWRP.