Hey guys, finally after a lot of struggle and research i found a nougat rom for lenovo vibe x3 (all the models). The rom version is 7.1.1 and it is a nightly build developers are continuosly working on it and the most important thing i haven't made this rom, i am just publishing it here so that many poor lenovo vibe x3 users can use their phone up to its full potential.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
so without any delay i will mention all the important details for flashing this rom to your device
prerequisite
bootloader unlocked vibe x3(unlocking bootloader guide)
2.Twrp flashed(flashing giude)
3.A usb cable
4.Android custom mokee rom(link is below)
5.Gapps for android 7.1.1(if needed)
6.A little mind
How to Install android 7.1.1
Firstly download the custom rom
2.Copy it to your phone memory
3.Boot your device in recovery mode(power off your device then, press power button+vol up.+vol down.)
4.Firstly factory reset your phone.
5.Then click on install
6.Select custom rom
7.And swipe to install it
8.Wait for the process to finish(it may take some time)
9.After the rom is flashed it show success in log
10.Then restart your device(reboot system at bottom)
11.Wait for the device to boot up(wait for atleast 5 min., it takes time for first bootup, dont press any button while rebooting)
12.That's all your custom rom is flashed. now just set up your device and enjoy your new android custom rom.
Click to expand...
Click to collapse
Downloads and Guides
unlock bootloader guide and twrp link:https://forum.xda-developers.com/general/general/unlock-bootloader-flash-twrp3-0-2-t3580553
mokee android 7.1.1 rom download link:https://download.mokeedev.com/?device=x3
gapps:http://opengapps.org/
does it work x3a40 model?
tarun yadvendu said:
Hey guys, finally after a lot of struggle and research i found a nougat rom for lenovo vibe x3 (all the models). The rom version is 7.1.1 and it is a nightly build developers are continuosly working on it and the most important thing i haven't made this rom, i am just publishing it here so that many poor lenovo vibe x3 users can use their phone up to its full potential.
does it work x3a40 model?
Click to expand...
Click to collapse
sanku777 said:
tarun yadvendu said:
Hey guys, finally after a lot of struggle and research i found a nougat rom for lenovo vibe x3 (all the models). The rom version is 7.1.1 and it is a nightly build developers are continuosly working on it and the most important thing i haven't made this rom, i am just publishing it here so that many poor lenovo vibe x3 users can use their phone up to its full potential.
does it work x3a40 model?
Click to expand...
Click to collapse
yep it works.
Click to expand...
Click to collapse
unable to unlock bootloader
]Hi bro,
i tried to unlock bootloader by following your steps after all at last when i enterd the command fastboot oem unlock it will show
failed remote can not use this command on user version
what i need to do plz help me bro
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
tarun yadvendu said:
sanku777 said:
yep it works.[/QUOT
iam getting error faiked remote can not use this command on user version what i need to do
my e-mail- [email protected]
my whatsapp no- +918951911562
Click to expand...
Click to collapse
Click to expand...
Click to collapse
suhaas narine said:
tarun yadvendu said:
sanku777 said:
yep it works.[/QUOT
iam getting error faiked remote can not use this command on user version what i need to do
my e-mail- [email protected]
my whatsapp no- +918951911562
Click to expand...
Click to collapse
i hope that method works for you.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Does this ROM has Volte Features ?(Mokee7.1.1)
tarun yadvendu said:
sanku777 said:
yep it works.
Click to expand...
Click to collapse
Thank u for reply. One more question Sir, Does this ROM has Volte Features ?
Click to expand...
Click to collapse
sanku777 said:
tarun yadvendu said:
Thank u for reply. One more question Sir, Does this ROM has Volte Features ?
Click to expand...
Click to collapse
no this rom does not have volte, the modem file is not updated yet. They are still working on it.
Click to expand...
Click to collapse
Thanks
tarun yadvendu said:
sanku777 said:
no this rom does not have volte, the modem file is not updated yet. They are still working on it.
Click to expand...
Click to collapse
Thank u Sir .
Click to expand...
Click to collapse
sanku777 said:
tarun yadvendu said:
Thank u Sir .
Click to expand...
Click to collapse
No problem
Click to expand...
Click to collapse
Languages?
Languages?Hungarian possible?
TheRealBear said:
Languages?Hungarian possible?
Click to expand...
Click to collapse
Well i don't know, as there are many languages in mokee rom, so may be hungarian ia also there.
While installing ota upgrade am getting a error
suhaas narine said:
While installing ota upgrade am getting a error
Click to expand...
Click to collapse
Try to wipe davlik cache and cache in advance wipe in twrp recovery, then try to flash it, it will work?
Lenovo vibe x3a40
Is it work for x3a40 ..I tried installing in but it says like it's only for x3a50 like that pls upload for x3a40
Sivaneshv said:
Is it work for x3a40 ..I tried installing in but it says like it's only for x3a50 like that pls upload for x3a40
Click to expand...
Click to collapse
It works on both x3a40 and x3c50, i have a x3a40 and i successfully flashed it. You should just download the rom from mokee rom official site, then flash it with your custom twrp recovery, if you still got any problem then, tell me.
And a important note, factory reset your phone before installing the rom, if you haven't done the factory reset then it will show you an error.
Hi. What gapps do you recommend? I'm not sure which ones are right. Thank you
Enviado desde mi Redmi Note 3 mediante Tapatalk
wpolo953 said:
Hi. What gapps do you recommend? I'm not sure which ones are right. Thank you
Enviado desde mi Redmi Note 3 mediante Tapatalk
Click to expand...
Click to collapse
Well mokee rom is nougat7.1.1 so download the arm64 7.1 stock or mini(my recommendation), or any other package then stock, it depends on your use.
tarun yadvendu said:
Try to wipe davlik cache and cache in advance wipe in twrp recovery, then try to flash it, it will work
Click to expand...
Click to collapse
Yes I done but still it showing version mismatch
Related
[ROM 4.1.2] JZO54K Plus - Pure Stock, Google Experience.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi!
after having tried almost all roms (from 2.x to 4.x) for this wonderful phone, I decided to create one myself.
I know that my work is similar than the 100.1% Google Experience but, before I leave my Nexus S, I will share my ROM anyway (and I know that for some people it may seem "obsolete").
I've worked around the last official Google release, Jelly Bean 4.1.2.
_-Details-_
* JZO54K Based
* rooted - SuperSU
* zipaligned
* deodexed
* Busybox installed
* Extended Power Menu
* SimpleKernel 1.4 (Stock Kernel + BLN-BLD)
* Touchscreen tweaked (Chainfire's init.d tweak)
* Gapps Included
Click to expand...
Click to collapse
_-Download-_
* Dev-Host - Download
Click to expand...
Click to collapse
_-Extras-_
* Volume Rocker Wake mod
* CM File Manager
* Signature
HTML:
[URL="http://forum.xda-developers.com/showthread.php?t=2219799"][IMG]http://img248.imageshack.us/img248/8011/jzo54kplus.png[/IMG][/URL]
Click to expand...
Click to collapse
_-Instructions-_
* Make a NANDroid backup,
* Make sure you have a backup of efs folder
* Complete wipe of your device (factory reset, wipe cache, wipe dalvik, format /system, /data, /cache, /boot, and, optional /sdcard),
* Flash JZO54K_Plus.zip
* Reboot System
* Reboot into recovery again to perform a fix permission (this fix nstools)
* Reboot System
* open Nstools and enable "use init.d scripts"
Click to expand...
Click to collapse
_-Thanks-_
* aaasss10, great friend in the "real life": the name of my ROM is a tribute of its for the i9000;
* Chainfire for the SuperSu and for the touchscreen tweak
* Terryhau for theSimpleKernel
* Paul627g for the Extended power menu
* Dsixda for the kitchen
* Brut.alll for the Apktool
* Cyanogenmod Team for the filemanager
* xda community: I'm without word!
Click to expand...
Click to collapse
This is a "unique stable release" ROM, without any other future mods (I left my Nexus S)
Sorry for the bad english
Mediafire says enter decryption key. Can't download
Sent from my Nexus S using xda app-developers app
The only thing that missed from KWBR and other stock rooted ROMs was Exteneded Power Menu. That's what I need the most
Thank you for sharing :good:
nibla101 said:
Mediafire says enter decryption key. Can't download
Sent from my Nexus S using xda app-developers app
Click to expand...
Click to collapse
I'm uploading on another host and I insert the new link when possible.
amicog said:
I'm uploading on another host and I insert the new link when possible.
Click to expand...
Click to collapse
Mirror Added at first post.
Thanks a lot amicog for sharing this ROM . But i can't see a awesome THEME for 4.1.2 JZO54K !!!
Who can link give me ???
Milad_Nexus said:
Thanks a lot amicog for sharing this ROM
Click to expand...
Click to collapse
Thank you to download it!
Milad_Nexus said:
. But i can't see a awesome THEME for 4.1.2 JZO54K !!!
Who can link give me ???
Click to expand...
Click to collapse
DJBhardwaj said:
The only thing that missed from KWBR and other stock rooted ROMs was Exteneded Power Menu. That's what I need the most
Thank you for sharing :good:
Click to expand...
Click to collapse
... the same think that i thought when i decided to cook this one!!
Thank you to downloading it!
Going to use this as my last and final ROM.... maybe.... if I can get rid of my flashing addiction
Me Gusta!
Me Gusta said:
Going to use this as my last and final ROM.... maybe.... if I can get rid of my flashing addiction
Me Gusta!
Click to expand...
Click to collapse
Thanks to use my ROM!
amicog said:
Thanks to use my ROM!
Click to expand...
Click to collapse
Your welcome! I assume this needs an aosp kernel?
Me Gusta!
GPS icon is not blinking for me.
It it me only?
Me Gusta said:
Your welcome! I assume this needs an aosp kernel?
Me Gusta!
Click to expand...
Click to collapse
Yes, NON CM kernel. :good:
The ROM includes the Simple Kernel just now.
velishka said:
GPS icon is not blinking for me.
It it me only?
Click to expand...
Click to collapse
i'll try it tomorrow!
ROM 4.1.2] JZO54K Plus
Milad_Nexus said:
Thanks a lot amicog for sharing this ROM . But i can't see a awesome THEME for 4.1.2 JZO54K !!!
Who can link give me ???
Click to expand...
Click to collapse
https://play.google.com/store/apps/...S50ZW1wbGF0ZS50aGVtZS5UaHlydXNIb2xvQmxhY2siXQ..
Dunno if it's compatible though, But try this. If you like the dark! =)
Funny, the download sections asks for passwords. Still couldn't test this..
killswitch70 said:
Funny, the download sections asks for passwords. Still couldn't test this..
Click to expand...
Click to collapse
Sorry but where the download section asks for a password? ...Excuse me but is not anywhere ..
amicog said:
Sorry but where the download section asks for a password? ...Excuse me but is not anywhere ..
Click to expand...
Click to collapse
Both mega and box accounts asks for passwords here in my end. I've very much given up on the fact that my M200 won't get stock 4.1.2 OTA. Would love to try this though.
killswitch70 said:
Both mega and box accounts asks for passwords here in my end. I've very much given up on the fact that my M200 won't get stock 4.1.2 OTA. Would love to try this though.
Click to expand...
Click to collapse
For me, Mega password but BOX not. Download last night.
killswitch70 said:
Both mega and box accounts asks for passwords here in my end.
Click to expand...
Click to collapse
Sorry but I don't know why they ask for a password...
In uploading to another mirror...
EDIT: Added new link at Dev-Host - first post edited
ROM 4.1.2] JZO54K Plus
amicog said:
Sorry but I don't know why they ask for a password...
In uploading to another mirror...
EDIT: Added new link at Dev-Host - first post edited
Click to expand...
Click to collapse
I finally downloaded it last night. Thanks! The 3rd link worked for me. Hmm, didn't realize I was using a lot of stuff not found on Stock 4.1.2. Gonna see if I could live without long press back to kill and volume wake for awhile. Just had my power button replaced a couple of weeks ago. Thanks again for posting.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
IT HAPPENED!Welcome to the Omnirom lollipop thread for vibrant. I would like to thank @humberos without him this wouldn't have been possible. He put a lot of work into bringing lollipop to the Galaxy S1.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Coming from Omni Kit Kat
NOTE: I'm not responsible of crashes due kernel changes.
1. Flash the ROM zip.
2. Reboot.
3. Wait the upgrading android dialog.
4. Enjoy!
Download
ROM
SuperSU for root access
Google Apps
PA-GApps
Euroskank
Minimal package by @devloz
How to Install
1. Enter recovery
2. Wipe "Factory Reset" (Unless you know what you are doing!)
3. Flash ROM zip
4. Reboot
5. Enjoy
Sources
Omni's GitHub
Useful Links
Website
Gerrit
XDA:DevDB Information
[ROM] [UNOFFICIAL] OmniROM 5.1 [HOMEMADE] [T959] , ROM for the T-Mobile Vibrant
Contributors
epicboy, humberos
ROM OS Version: 5.0.x Lollipop
Version Information
Status: Beta
Created 2015-03-01
Last Updated 2015-06-11
So the back button is working now? On humberos latest vibrant build it was the other way around. Just making sure before I flash it.
Sent from the inside of my bong
dzee206 said:
So the back button is working now? On humberos latest vibrant build it was the other way around. Just making sure before I flash it.
Sent from the inside of my bong
Click to expand...
Click to collapse
Sorry but I really don't know what's wrong. I just wrote what thantho said. Can you test for me please?
Hi @epicboy thanks so much for all the selfless work you are doing
I'd love to know if there any major changes in your build compared to humberos'
mcselasie said:
Hi @epicboy thanks so much for all the selfless work you are doing
I'd love to know if there any major changes in your build compared to humberos'
Click to expand...
Click to collapse
Not really. All I did was use newer sources. I changed some values for button layout but that didn't seem to fix the problem.
epicboy said:
Sorry but I really don't know what's wrong. I just wrote what thantho said. Can you test for me please?
Click to expand...
Click to collapse
Yes I will lol, that's why I mentioned you in my comment in the i9000 thread. Feel free to put me down as a tester for future releases. Just let me backup my current LP setup real quick.
Sent from the inside of my bong
Edit: @epicboy everything works except for the back button, re assigning them doesn't help either. Looks like we'll have to settle for enabling the soft keys till a more suitable fix is found. None the less thanks for your efforts.
epicboy's build feel little smoother than humberos's build everything OK. Hope next build will sovle our problem and lollipop 5.1 will better.
hmm yes Thanhtho96 thankyou for your help i'm just waiting for help to get lollipop for my device
---------- Post added at 09:27 AM ---------- Previous post was at 09:15 AM ----------
sorry im not understand what u asking? Im for eclai 2.1 ill just flash this rom cm11 and tried slimkat but no use.
Audiracecar90 said:
hmm yes Thanhtho96 thankyou for your help i'm just waiting for help to get lollipop for my device
---------- Post added at 09:27 AM ---------- Previous post was at 09:15 AM ----------
sorry im not understand what u asking? Im for eclai 2.1 ill just flash this rom cm11 and tried slimkat but no use.
Click to expand...
Click to collapse
You should reply him in Q/A
sorry im not understand what u asking? Im from eclai 2.1 ill just flash this lollipop rom from cm11 and tried slimkat but no use.
Has anybody had any luck with this and Xposed? I just can't get it to install for some reason no matter how many times I flash the file.
dzee206 said:
Has anybody had any luck with this and Xposed? I just can't get it to install for some reason no matter how many times I flash the file.
Click to expand...
Click to collapse
I haven't tried that
Apps to SD help
I still can't move apps to SD card. Is there a certain build.prop edit that can fix this .... ? I get an error "not enough space on SD card" I am not talking about an external SD card but the internal emmc .....and yes there is enough about 2.4GB free memory
Audiracecar90 said:
hmm yes Thanhtho96 thankyou for your help i'm just waiting for help to get lollipop for my device
---------- Post added at 09:27 AM ---------- Previous post was at 09:15 AM ----------
sorry im not understand what u asking? Im for eclai 2.1 ill just flash this rom cm11 and tried slimkat but no use.
Click to expand...
Click to collapse
how about bootloader?
hey enviro50042c where i can find gb bootloader?
dzee206 said:
Has anybody had any luck with this and Xposed? I just can't get it to install for some reason no matter how many times I flash the file.
Click to expand...
Click to collapse
Are you sure you have the lp alpha xposed version?
epicboy said:
Are you sure you have the lp alpha xposed version?
Click to expand...
Click to collapse
Yes sir its the alpha version as it says it has xposedbridge.jar 61 in the framework section. The damn install button stays greyed out no matter what I try, maybe it needs a update or something.
Sent from the inside of my bong
dzee206 said:
Yes sir its the alpha version as it says it has xposedbridge.jar 61 in the framework section. The damn install button stays greyed out no matter what I try, maybe it needs a update or something.
Sent from the inside of my bong
Click to expand...
Click to collapse
You have root access?
epicboy said:
You have root access?
Click to expand...
Click to collapse
Yes like usual, I even tried doing a fresh install of the ROM hoping it would help but ended up with the same results. Probably still too early for us vibrant owners to use xposed on LP.
Sent from the inside of my bong
dzee206 said:
Yes like usual, I even tried doing a fresh install of the ROM hoping it would help but ended up with the same results. Probably still too early for us vibrant owners to use xposed on LP.
Sent from the inside of my bong
Click to expand...
Click to collapse
Hey Dzee, why do you need Xposed for now? Is it...the patcher? Contact me via PM if yes.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Nightlies For Yu Yureka Has Arrived
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1 (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
Important information:
This thread is for CyanogenMod 12.1 builds for Yu Yureka. The following will not be supported here:
Custom kernels
Mods
Xposed
Installation
First time flashing CyanogenMod 12.1 on your device, or coming from another ROM?
1. Download the zip(s)
2. Check Bootloader Unlocked.
3. Perform a nandroid backup of your current ROM (Optional)
4. Wipe data/factory reset
5. Flash CyanogenMod
6. Reboot
Official Builds
http://download.cyanogenmod.org/?device=tomato
Google Application
http://forum.xda-developers.com/android/software/app-minimal-gapps-gapps-lp-20150107-1-t2997368
Known Issue/Bugs
Found a Bug ? Random Reboot
Logs Please.. If Not Ignored. :fingers-crossed:
Since Nightly DDMMYY.
1. Reserved.
[FAQ]
I also suggest you guys research on how to flash this etc and the main different between Cyanogen Inc and CyanogenMod, please dont ask them here, the purpose of this thread is get rid of Bugs ASAP, and have a smooth and bugfree and latest OS for our device. Given that there was so many unofficial builds not many of them maintain with some modification not knowing that it was the cause of the issue, bugs here will be taken seriously.
Credits :
Cyanogen Inc And Cyanogenmod Community.
Its here finally. When official cyanogen os for tomato is yet to be updated to 5.1, I'm glad CM made it. Hoping to see Good progressive development for this device due to this....
Downloading ??
@Zenns android freezes after receiving a call and get rebooted...I guess that is the bug present on all cm based ROM..What is the issue?? can't it be solved ...This issue made this ROM impossible to use as a daily driver ...Plz provide a fix or do something...thanks ...
Sent from my AO5510 using Tapatalk
@Chocklety Boyee
I will report the following issue to CyanogenMod Developers.
Crash Log
This is from the beginning of time of this rom on my device i think. i deleted (quite a) few lines towards the end to keep the file size within the upload limit. Please pardon me if i have done something wrong to the log file. This is the first time i have taken a log.hope this helps
Zenns said:
@Chocklety Boyee
I will report the following issue to CyanogenMod Developers.
Click to expand...
Click to collapse
Thanks @Zenns ...BTW y your thread has been removed from you forum?? Any reasons?? Does using 3rd party dailer solve the freezing issue??. ..thanks...
Sent from my AO5510 using Tapatalk
Chocklety Boyee said:
Thanks @Zenns ...BTW y your thread has been removed from you forum?? Any reasons?? Does using 3rd party dailer solve the freezing issue??. ..thanks...
Sent from my AO5510 using Tapatalk
Click to expand...
Click to collapse
I see a new nightly is added to their db, In that 20150611 .zip Is dialer freeze issue solved?
arvindgr said:
I see a new nightly is added to their db, In that 20150611 .zip Is dialer freeze issue solved?
Click to expand...
Click to collapse
I tried nightly of 10/6. Dialler / SIM related FCs were there though less IMO. As per the changelog of the 11/06 nightly nothing much done regarding this. So it may still be there. I intend to try out nightlies every week- maybe the one that may be released on 16 / 17 th.
But a lot of progress is being made. Soon we should have a daily driver in 12.1
Dialer Fix
For Dialer Issue ->
*#*#7769#*#*
1) In the proximity calibration screen, tap on Start
2) Wait a few seconds till it reads Calibration Good (in green)
Tap Exit
As Promise got Cyanogen Developers to Look Into the proximity issue should be fix all dialer freezing issue, and I have no idea why was the thread deleted in Yu Forum.
also for the Notification LED Yureka isnt the only phone affected by it..
Zenns said:
For Dialer Issue ->
*#*#7769#*#*.......
Click to expand...
Click to collapse
Just what was needed
@Zenns ..what about led bug?? Cant it be solved?
Sent from my AO5510 using Tapatalk
Chocklety Boyee said:
@Zenns ..what about led bug?? Cant it be solved?
Sent from my AO5510 using Tapatalk
Click to expand...
Click to collapse
It will be in the near future.
Chocklety Boyee said:
@Zenns ..what about led bug?? Cant it be solved?
Sent from my AO5510 using Tapatalk
Click to expand...
Click to collapse
Led bug fix by flashing universal.zip....
Can someone help me booting into safe mode of Yu Yureka? Device info attached.
malic111 said:
Can someone help me booting into safe mode of Yu Yureka? Device info attached.
Click to expand...
Click to collapse
You Would need Unlock Bootloader, Flash TWRP -> Nightly
Google It.
Zenns said:
You Would need Unlock Bootloader, Flash TWRP -> Nightly
Google It.
Click to expand...
Click to collapse
Actually i just need to go to safe mode on stock rom, do you know the key combination for safe mode on yu yureka?.
On Internet, i can't find safe mode key combinations.
saikatrockz said:
Led bug fix by flashing universal.zip....
Click to expand...
Click to collapse
where is universal zip? link
malic111 said:
Actually i just need to go to safe mode on stock rom, do you know the key combination for safe mode on yu yureka?.
On Internet, i can't find safe mode key combinations.
Click to expand...
Click to collapse
Long Press on "Power Off" to reboot device in Safe Mode
Rakesh251 said:
where is universal zip? link
Click to expand...
Click to collapse
Here you go....
Download it from attach..
Flash thanderzap kernel then flash the universal.zip..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AICP is known by everyone as Ice Cold Project that started on Desire HD and since then evolved into a mature ROM with the BEST community you can find!!!
Until Lollipop, the rom has always been AOKP based. Unfortunately, since AOKP either stopped development or will make a comeback later this year, we changed our base to CM when it comes to hardware, drivers and some features.
If there are any bugs, either we will sort them or CM team if it concerns their modifications. This rom isn't CM supported so no need to report errors or bugs to them!!
Click to expand...
Click to collapse
Code:
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
Flash procedure:
1. Make sure that you are running my CM build or the CM build by Meticulus
2. Remove all registered fingerprints
3. Reboot into TWRP
4. Do a Factory reset
5. Flash the AICP build
6. Flash Gapps (I suggest Open Gapps,use the arm64 packages)
7. Reboot
8. Profit
DOWNLOAD
XDA:DevDB Information
AICP, ROM for the Huawei P9 Lite
Contributors
The Marionette, Meticulus, XePeleato, surdu_petru
Source Code: https://github.com/Meticulus
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Based On: CyanogenMod
Version Information
Status: Beta
Created 2016-12-02
Last Updated 2016-12-02
Reserved
WORKING/NOT WORKING
-same as CM
Bugs?
How to delete the fingerprint
Does everything work or are there any bugs?
Raymen03 said:
How to delete the fingerprint
Click to expand...
Click to collapse
Settings > Lockscreen > Fingerprint > *Click on your registered fingerprint in the options* > Delete > *click OK*
Thijs van Hal said:
Does everything work or are there any bugs?
Click to expand...
Click to collapse
Simply put,it has the same bugs as CM(the 2.1MP cam limit and that is that?)
The Marionette said:
Simply put,it has the same bugs as CM(the 2.1MP cam limit and that is that?)
Click to expand...
Click to collapse
How about Bluetooth paring?
Care to elaborate on the difference between this and CM?
Hi,
I have a few questions:
1: Does this work on any P9 Lite variant (i have VNS-L21)?
2: Why is archive so big (almost 700mb)?
3: What Open Gapps package do you recommend to flash?
Tnx
tw1st3d ?
tw1st3d83 said:
Hi,
I have a few questions:
1: Does this work on any P9 Lite variant (i have VNS-L21)?
2: Why is archive so big (almost 700mb)?
3: What Open Gapps package do you recommend to flash?
Tnx
tw1st3d ?
Click to expand...
Click to collapse
1. Yeah,I declared the L"X"1 value to say that it is compatible with both L31 and L21.
2. AICP is "fatter" than CM since it has extra features,so no reason to panic. :silly:
3.I personally use the Pico package and then just install other Google apps which I need. That is the beauty of Open Gapps,you have several options.
Sent from my VNS-LX1 using Tapatalk
The Marionette said:
1. Yeah,I declared the L"X"1 value to say that it is compatible with both L31 and L21.
2. AICP is "fatter" than CM since it has extra features,so no reason to panic. :silly:
3.I personally use the Pico package and then just install other Google apps which I need. That is the beauty of Open Gapps,you have several options.
Click to expand...
Click to collapse
Thanks man for fast answer, the flashing will comence in the morning, i need a straight head for this ?
And sa for archive size i did not panic, just been curious because i had AICP on my galaxy s4 and it was half the size...
AICP rom is one of the best out there and it has sooo much customization options that i almost cry with happyness when i saw this post ?
And one more question: do i use ARM or ARM64 version of gapps?
Huawei P9 Lite have to use ARM64
Potato997 said:
Huawei P9 Lite have to use ARM64
Click to expand...
Click to collapse
Yeah,I thought everyone knew that...
Added it as well to the instructions! xD
@The Marionette thanks for this amazing work. There is some possibility that you can support the VNS-L23 variant? It is practically equal to the L31, with the only differences that do not have NFC support, the bands 4G are different and it has 2GB of RAM. Greetings.
Hey @The Marionette,
I flashed the ROM and i got error that data partition could not be mounted and then when i click to boot in to android the phone boots but it ask for password to start android...
What to do?
EDIT: After rebooting recovery the data partition is mounted again and i did a full wipe then flashed rom and gapps again but after boot in to android it ask for password again...
tw1st3d83 said:
Hey @The Marionette,
I flashed the ROM and i got error that data partition could not be mounted and then when i click to boot in to android the phone boots but it ask for password to start android...
What to do?
EDIT: After rebooting recovery the data partition is mounted again and i did a full wipe then flashed rom and gapps again but after boot in to android it ask for password again...
Click to expand...
Click to collapse
Someone on the question and answer thread had the same problem. See if any of his answers helps.
Sent from my Huawei P9 Lite using XDA Labs
oss_mosis said:
@The Marionette thanks for this amazing work. There is some possibility that you can support the VNS-L23 variant? It is practically equal to the L31, with the only differences that do not have NFC support, the bands 4G are different and it has 2GB of RAM. Greetings.
Click to expand...
Click to collapse
I have the L21 variant and it works fine for me. If CM works on your device,AICP will work as well.
tw1st3d83 said:
Hey @The Marionette,
I flashed the ROM and i got error that data partition could not be mounted and then when i click to boot in to android the phone boots but it ask for password to start android...
What to do?
EDIT: After rebooting recovery the data partition is mounted again and i did a full wipe then flashed rom and gapps again but after boot in to android it ask for password again...
Click to expand...
Click to collapse
Did you follow the instructions or did you do it your own way?
Are you coming from stock?
I think everyone needs to be on CM before flashing.
I flashed it exactly like I described and it booted.
The only downside is that the TWRP goes red(thinks the current ROM is stock) and data can't be mounted. I will look into it.
Sent from my VNS-LX1 using Tapatalk
The Marionette said:
I have the L21 variant and it works fine for me. If CM works on your device,AICP will work as well.
Did you follow the instructions or did you do it your own way?
Are you coming from stock?
I think everyone needs to be on CM before flashing.
I flashed it exactly like I described and it booted.
The only downside is that the TWRP goes red(thinks the current ROM is stock) and data can't be mounted. I will look into it.
Sent from my VNS-LX1 using Tapatalk
Click to expand...
Click to collapse
I followed Meticulus instructions first (did all backups and dump) and then i followed your instructions from OP but i come from stock rom, did not try to install Meticulus CM ROM... So now i managed to get past password screen by formating data partition to FAT and then formating it back to ext4 but now when phone boot i get "Decryption unsuccessful" screen and when i click "reset phone" button it reboots in recovery, wipe cache and then boots up back to "Decryption unsuccessful" screen...
I am downloading now Meticulus build to try with that... Will report back soon...
EDIT: I managed to boot AICP!!! By doing this:
First i updated recovery (did not see that Meticulus pushed V2) then i flashed Meticulus CM build but i got "Decryption failed" screen again but this time when i clicked "reset phone" buton the phone just rebooted to TWRP.
Then i did again full harcore wipe and flashed CM with open gapps and the phone booted in to system without problem, from that point i figure that AICP must work now so i rebooted back to TWRP, did another hardcore full wipe, flashed AICP with Open Gapps micro ARM64 version and the phone finaly booted to AICP :happy: :happy: :happy:
Btw i noticed few thing while doing all this... When i first booted CM my SIM card was not recognized but i figured it needs some time to get the signal or wathever but that never hapend and i cheked camera app and in setting of the app i saw that front and back camera was set to full resolution and the photo i took was really in full (13Mpix) resolution... After checking that and few more things i flashed AICP and at first boot my SIM still not working so i figure i will reboot and after second boot the SIM works again but in this ROM front and back camera are set to 2.1mpix (not a problem for me, just saying for ppl to know)...
Now i am going to play with this awesome ROM!
Thanks @The Marionette
EDIT 2: So after few hours of playing with AICP i been forced to go back to stock because my mobile network gone crazy, every 5-10 minutes it disapear and only reboot helps to get connected again and when network disapears the UI get so much lag that is almost unusable...
I can confirm that other things in ROM work as it should, fingerprint, themes, sound bar, navigation bar customization, lcd density, UI animations customizations etc...
Nice work and keep up the good work! ?
So I am running this ROM on my device since yesterday and I really like it. Seems very stable and allows for a lot of modifications.
It drains a lot of battery while listening to music when the device is locked but I also experienced this on the CM ROM.
I am keeping it on my device for now and am looking forward to new updates
Hello @The Marionette,
May I ask you if you plan to update the AICP ROM with the update from CM? Thank you
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
MultiRom Official Website
What is MultiROM
MultiRom is a Russian project which mainly focus on quality and stability of the ROM builds.
MultiRom Team Quotes,
"Our team is a team of IT professionals. We use modern version control systems, assembly, testing, quality control assembly"
Click to expand...
Click to collapse
Main goals of the project
MultiRom team uses new translation system and patching firmware "B.A.R.S."/Methic.
MultiRom way takes more time to compile but the quality of their work is on a high level.
All APK's during the translation are subject to optimization. The greater the amount of free RAM - as a result of the optimization.
-And one example of their great work & high quality is how much free ram is available compared to other MIUI ROM's.
-They do not include any third-party firmware/hacked software. Only Open-Source.
What are MultiRom features
- Based on China Developer Roms.
- Great improvement in Ram management.
- Weekly Updates For Developer Rom After MIUI Official Update.
- Enough Google Apps Installed.
- Useless Apps removed.
- Appropriate Size Reduction For Full Firmware.
Included Languages
Chinese (miui.com)
English (miui.com, MultiROM)
Russian (MultiROM)
Ukrainian (MultiROM)
Lithuanian (Mr.Sl, Jonas)
German (pareh, cpu82)
Requirements
1- Unlocked Bootloader
2- Custom TWRP Recovery.
Important
Just Wipe Data/Cache. DO NOT WIPE SYSTEM.
Updating
Download new update, go to updater & select three dots on top right & select "Choose update package"
Or:
Download new update & flash in TWRP wiping Dalvik & Cache afterwards.
Note about root access
in Dev ROMs Root is built-in but for Stable roms you have flash SuperSU yourself.
Download Links (Developer)
Official Site • Mirror
Official Site & Credits
https://multirom.me
(Google Chrome to Translate)
Is it KitKat version?
And this is a share....r8?
raymond_bqg said:
Is it KitKat version?
And this is a share....r8?
Click to expand...
Click to collapse
LP based on latest china dev rom.
And yes, I'm just sharing this rom here.
Will try someday.
raymond_bqg said:
Will try someday.
Click to expand...
Click to collapse
??
1.6 GB available Ram:victory: wow!!
First miui mod that doesn't lag and heat up
preetnoobie said:
1.6 GB available Ram:victory: wow!!
First miui mod that doesn't lag and heat up
Click to expand...
Click to collapse
Is all themes are free like ROM from xiaomi.EU and gkalen ?
And I can see that it device is 2014818,so is mine.
So.....is it redmi 2A file?
raymond_bqg said:
Is all themes are free like ROM from xiaomi.EU and gkalen ?
Click to expand...
Click to collapse
yep
raymond_bqg said:
Is all themes are free like ROM from xiaomi.EU and gkalen ?
And I can see that it device is 2014818,so is mine.
So.....is it redmi 2A file?
Click to expand...
Click to collapse
No no....HM2WXCpro I.E. Redmi 2 prime(Indian variant)
raymond_bqg said:
Is all themes are free like ROM from xiaomi.EU and gkalen ?
And I can see that it device is 2014818,so is mine.
So.....is it redmi 2A file?
Click to expand...
Click to collapse
See the highlighted one
Are you planning to launch in Portuguese?
NaassomDourado said:
Are you planning to launch in Portuguese?
Click to expand...
Click to collapse
Don't know. I was just sharing this ROM.
Nice ram management....though I am getting 1.4 GB free ram on 8.1.2.0....
Btw ....any way to active volte?
raymond_bqg said:
Nice ram management....though I am getting 1.4 GB free ram on 8.1.2.0....
Btw ....any way to active volte?
Click to expand...
Click to collapse
It's already there
Are you sure u flashed the correct zip?? HM2WXCpro?
Try 7.4.13 Dev rom it may solve the problem
coming from custom rom so i should wipe everything and flash ? or do i need to do anything else coz i saw "dont wipe system"
AKHILR4J said:
coming from custom rom so i should wipe everything and flash ? or do i need to do anything else coz i saw "dont wipe system"
Click to expand...
Click to collapse
you may not wipe system. else it may show 'failed to mount /system' error.
preetnoobie said:
It's already there
Are you sure u flashed the correct zip?? HM2WXCpro?
Try 7.4.13 Dev rom it may solve the problem
Click to expand...
Click to collapse
yep....i am sure that was correct file.Evry thing is working fine except volte .And the lag in quick setting was for the theme i installed....i guess.
ok....i will try the version mentioned by u.
thanx.
---------- Post added at 11:14 AM ---------- Previous post was at 11:12 AM ----------
AKHILR4J said:
coming from custom rom so i should wipe everything and flash ? or do i need to do anything else coz i saw "dont wipe system"
Click to expand...
Click to collapse
if u want to wipe system..then after wiping system again reboot to recovery and flash the rom.
raymond_bqg said:
yep....i am sure that was correct file.Evry thing is working fine except volte .And the lag in quick setting was for the theme i installed....i guess.
ok....i will try the version mentioned by u.
thanx
Okay boss
Click to expand...
Click to collapse
lil' doubt...will it lag in 1Gb version ?
AKHILR4J said:
lil' doubt...will it lag in 1Gb version ?
Click to expand...
Click to collapse
Kitkat variant is available to download for 1GB versions. If you need lollipop, you can flash HM2pro version.