Database Develop

Trying to flash back to stock. Bricked.

I have the WOOT sprint G tab.
I am trying to flash back to stock EA24. however i think i bricked my phone.
now i am getting a "phone triangle computer" picture on the phone and it wont do anything.. from there i have been trying to flash with odin
i installed that sprint drivers, opened odin, select the 512 pit file, select the correct binary under the "pda" option, select re-partition. but every time it gets only to this stage and fails, it also failed like this when i was in download mode.
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> Enter CS for MD5..
<ID:0/005> Check MD5.. Do not unplug the cable..
<ID:0/005> Please wait..
<ID:0/005> Checking MD5 finished Sucessfully..
<ID:0/005> Leave CS..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.bin
<ID:0/005> Sbl.bin
<ID:0/005> param.lfs
<ID:0/005> zImage
<ID:0/005> recovery.bin
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
when it gets to this part there is part of a a small progress bar on my screen.
i then have to shut the phone off and turn it back on for odin to work at all.
kinda scared i screwed my self here.

Turn off the phone by disconnecting the USB cable, holding the power button down until the screen goes off.
Open Odin and select the tar file in the PDA slot only.(You should have remove the MD5 extension already). Do not select re partition, leave everything as it is.
Connect the USB and the device should turn on to the same PC connection to phone error screen. Wait till Odin detects the com Port and flash. Repeat until successful.

I have done this 10 times now exactly like you said, and i still get the same error.
odin 1.7 or 1.3 only selected the file SPH-P100.EA24.SECURE.REV07-FULL_CL871413.tar
everytime it shows part of a blue progress bar and odin says
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.bin
<ID:0/005> Sbl.bin
<ID:0/005> param.lfs
<ID:0/005> zImage
<ID:0/005> recovery.bin
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

I can get into recovery by using heimdall and a zimage
but from there i get a
checking /system..
E:failed to mount /system (invalid argument)
/system may be rfs. Checking...
checking /data...
checking /datadata...
E:failed to mount /datadata (invalid argument)
/datadata may be rfs. checking...
checking /cache
done!
and then e: Can't mount /sdcard
when i try to choose zip from sdcard.

Phone - triangle - computer is another download. You get that screen when you have a bad flash. Redownload your files - sometimes there is a corrupted file, causing success, but the tab won't boot, so you get the phone - triangle - computer.

I see from your computer output you are missing the dbdata.rfs file. That would explain the blank line.

[Q] [HELP] Samsung Galaxy S Anycall M110S Nandroid Backup/ Soft Brick

Good Day Folks.
So yesterday I was flashing my Samsung Galaxy S M110S (Korean Version)
with a stock rom
(M110S-Gingerbread-HOME-IMAGE-REV03-VG26-1812-USER.tar) and installing
Tegrak Kernel V29.
Everything works smoothly until I flashed a ClockworkMOD Recovery not
intended for my phone(sorry I was foolish and flash a CWM meant for
other device) then when I open my device I am always brought to this
(Samsung Stock Recovery)
Samsung utils blah. blah.
# MANUAL MODE #
E:failed to mount /cache (Invalid Argument)
E:Can't mount /cache/recovery/recovery_kernel_log
E:copy kernel file :: Can't open /cache/recovery/recovery_kernel_log
E:failed to mount /cache (Invalid Argument)
E:Can't mount /cache/recovery/log
E:Can't open /cache/recovery/log
blah.blah
Click to expand...
Click to collapse
I am only allowed to navigate with 3 options; Reboot, Wipe Data, Wipe
Partition. Rebooting only brings me to the recovery, both wipes
provides the same error.
So I try to flash again with the same stock rom and ODIN keeps on
throwing me this:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> modem.bin
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Left with no idea, I flashed an iCarus SpeedMod kernel(via ODIN) to see
what will happen. Luckily the recovery is now CWM and I was entitled
with so many options. One of this is the Backup/Restore option so I
think that if I have the right backup files stated below, I can put it
into the internal SD card(I have access) and launch the Restore
option to bring my phone back to life.
cache.img
data.img
dbdata.img
nandroid.md5
and all the other files you get when backup-ing files using CWM.
I am asking for your full help. Please be noted that my device:
Can access Download Mode
Can access Recovery Mode(no function)
Can be recognized by ODIN and be flashed.
...and is in need for a very big help!
So for those of you who has a nandroid backup(if my terms are correct)
of a Samsung Galaxy S M110S or has an idea to resurrect my device I
will be very thankful.
And If I can add I can also select Apply Update Via ZIP. Does that mean
I can also apply zip updates? If yes, where can I find those?

please help me with this one.

gertnilo said:
please help me with this one.
Click to expand...
Click to collapse
Seems an old post (just came across this ....anyway
You need to flash files from the repair kit, download from links below

Help internal mmc block !! galaxytab P1000

recently my galaxy tab keep crashing till it suck in the startup in a flashing logo of samsung
i tried odin never works then i went to samsung maintenance they say u hav to change the motherboard !!
i really dont think the problem from the board i really hope it can be fixed by using some kind of software
here is the text that i got from the recovery mode
--verfing internal mmc block
E: failed to mount mmc : open file
internal mmc checksum verify failed.
#MANUAL MODE#
--updating application ...
E: failed to mount /preload (no such file or directory)
E: install_application_for_customer:cant mount / preload
your storgare not prepare yet , please use UI menu for for format and reboot actions .
--Appling multi-csc...
installing multi -csc
multicsc : scan access to ojxcom .
multicsc : opera mini[lib] reset .
appliedthe CSC-code 'xss'.
successfully applied multi-csc .
Click to expand...
Click to collapse

I think the problem should be solved if you restock to stable gingerbread.. .
Sent from my GT-P1000 using xda app-developers app

tnx for the reply
i tried gingerbread it never works :/ kies cant open the tab my rom was froyo 2.2

He meant you should flash GB using Odin, not upgrade via Kies.
Follow my signature, download Overcome's PDF guide, and GB-Stock-Safe-v5 (it has all the tools you need in it).
Open the guide, jump to page 7, put tab to download mode, and flash according to that guide.

so no need to kies. cuz when it happen i tried other tut required kies i couldn't pass the first stage in oden then it bricked
i'll try it hope it will work tnx guys

sorry guys same result
it failed in the end of first stage
i got this message in odin
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.bin
<ID:0/004> cache.rfs
<ID:0/004> dbdata.rfs
<ID:0/004> factoryfs.rfs
<ID:0/004> movinand.mst
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse

Looks like a bad internal sd chip.

Follow ChrisCTX's guide...search for it
Sent from my GT-P1000 using xda app-developers app

Flashing ROM is failed

Hi,
I have Samsung Galaxy S3 I9305 LTE phone made in Vietnam. Initially I got the Samsung Logo stuck issue. In the stock recovery mode i got the following error.
"E:failed to mount /efs (Invalid argument)".
I tried to wipe cache partition and checked. but no luck.
Then I rooted the phone using the following file:
CF-Auto-Root-m3-m3zh-gti9305.tar.zip
Then i installed the CWM recovery using the following file:
CWM_touch_6.0.4.7_i9305.tar
Then I went to CWM recovery and did the following things:
back up to /SD card
wipe data/factory reset
format /system
format /data
wipe dalvik cache
then First I tried to flash the 2 ROMs(I9305XXUFNL1_I9305H3GFNL1_I9305XXUFOA1_HOME.tar.md5 and I9305XXUFNL1_I9305ORLFOB1_I9305XXUFOA1_HOME.tar.md5) . Both are installed. but logo issue was still there. Then I found the ROM(I9305XXUENH1_I9305FTMENJ1_I9305XXUENG1_HOME.tar.md5) using KIES using model no and serial no.
I flashed that ROM using ODIN and ROM installation is failed. Following is the ODIN Log.
<ID:0/007> Odin engine v(ID:3.1100)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> boot.img
<ID:0/007> NAND Write Start!!
<ID:0/007> cache.img
<ID:0/007> hidden.img
<ID:0/007> modem.bin
<ID:0/007> recovery.img
<ID:0/007> system.img
<ID:0/007> tz.img
<ID:0/007> sboot.bin
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed.
Then I went to Android Recovery Mode and still I'm getting the following error:
"E:failed to mount /efs (Invalid argument)".
Note: I did not do any mount in recovery mode
Please help me on this.

Note 9 SM-N960U Flash Issues

Greetings all,
I'm attempting to flash my SM-N960U from ATT to Verizon. I've tried the Verizon version: SM-N960U VZW, which passes in Odin but the phone fails to mount the data. I get the following message on the phone:
/////
#Reboot Recovery Cause is [[odin]RebootRecoveryAfterOdinDL]#
Support SINGLE-SKU
Block-Based OTA
Supported API: 3
-- Resizing...
E: failed to mount /data (Invalid argument)
can't mount '/data', rc = '-1'(Invalid argument)
:failed the resizing-data
\\\\\
I tried the stock version SM-N960U1 XAA - which fails. From what I've researched online, the SM-N960U version should be able to work on Verizon when flashed successfully.
Odin log:
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 7107 M
<ID:0/004> SetupConnection..
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Thanks for any feedback.

Don't think you can because one is GSM and the other is CDMA.
Sent from my SM-N960U using XDA-Developers Legacy app