[Android 7.0+] AppRadio Unchained Rootless - Paid Software Announcement and Discussion

AppRadio Unchained Rootless allows full mirroring of your phone from your AppRadio. This means that any app can be controlled from the head unit screen and not just a few that are specially adapted.
AppRadio Unchained Rootless is available from the Play store here: AppRadio Unchained Rootless
The user's manual is available here: User's manual
For this app to work Android 7 or higher is required. As Android 7 only allows to inject complete gestures, a gesture has to be completed first on the head unit before it will be dispatched to the phone. It works similar to record and playback. Suppose you need to do a long press of 2 seconds, first press for 2 seconds, once you lift your finger it will be dispatched and replicated on the phone where it will take 2 seconds as well. It's recommended to only do things that take a short time so there won't be too much delay.
Important
The 'Smartphone setup' on the head unit needs to be set correctly for Android as by default it's configured for Iphone. Go to Settings->System->Input/Output Settings->SmartphoneSetup and set Device to 'Others' and Connection to 'HDMI'. See this video: Smartphone setup
Any other AppRadio related app needs to be uninstalled as this blocks the connection to AppRadio Unchained Rootless.
AppRadio mode requires that your device is connected to the HDMI input of the head unit. Depending on the device this can be done with a MHL / Slimport / Miracast / Chromecast adapter. This app supports automatic connection to wireless screencasting devices. Since Google API doesn't support this directly it is done via the phone's GUI. Note that only the phone's built-in screencasting capabilities can be used.
Because this app may not work for your setup there's an extended trial period of 48 hours. In order to claim this simply request a refund within 48 hours after purchase by emailing the order number to the support email address.
Supported head units: any AppRadio that supports Android AppMode via HDMI.
For example: SPH-DA100, SPH-DA110, SPH-DA210, SPH-DA120, AVH-X8500BHS, AVH-4000NEX, AVH-4100NEX, AVH-4200NEX, AVIC-X850BT, AVIC-X950BH, AVIC-Z150BH, AVIC-6000NEX, AVIC-6100NEX, AVIC-6200NEX, AVIC-7000NEX, AVIC-7100NEX, AVIC-7200NEX, AVIC-8000NEX, AVIC-8100NEX, AVIC-8200NEX
Units that have AppRadio mode via USB (a.k.a. AppRadio One) are not supported.
Android 7 Bluetooth bug
If during connection 'Accept thread error' is displayed this is not because of a bug in the app but due to a bug in Android 7.
It can be fixed by disabling BT background scanning: Go to Settings -> Location, in top right menu click Scanning -> Bluetooth Scanning.
The following features are supported:
- Multitouch
- AppRadio buttons
- GPS data transfer via mock locations (only works with head units that have a GPS receiver)
- Wake lock
- Rotation locker (to put any app in landscape mode)
- Real calibration
- Start on HDMI detection (for use with phones and HDMI adapters)
- Notifications to indicate connection state
- Diagnostics
- Automatic Bluetooth toggle for improved connection
Beta test version
The beta test version has the latest features but can also contain bugs.
You need to become a tester of the AppRadio Unchained Rootless app to be able to get it.
Please apply here: https://play.google.com/apps/testing/mars.area51.arunchainednr
Beta test release notes
0.09
- Fix for black menu text color, now white as it should be.
- SWC commands can now be directed to a target app.
0.08
- Fix for calibration out of range.
- Fix for delay of casting start.
- Support for automatic casting on Samsung Android 9.
- Fix for startForegroundService.
- Fix for rotation locker.
- Change HDMI wired connection trigger to be triggered by Bluetooth connection.
AppRadio is a registered trademark of Pioneer.
Disclaimer: You are solely responsible for using this app in such a way that it does not impair your ability to drive.

The app was just released to production in the Play store so it will take a bit until it becomes available.

Does this version also requires the phone rooted. I'm on a mate 9 pro with Android 7?

kseagle said:
Does this version also requires the phone rooted. I'm on a mate 9 pro with Android 7?
Click to expand...
Click to collapse
Root is not required.

Perfect. I was gonna buy it anyway but nice to know how much work I need to do on the phone

Planning to finally upgrade from the Samsung Note 3 to the Samsung Galaxy S8+.I have a pioneer AVH-8500-BHS with Samsung wireless Dongle. Will this set up work?
I hope so can not wait!
Sent from my SAMSUNG-SM-N900A using XDA Free mobile app

GWM4Tennis said:
Planning to finally upgrade from the Samsung Note 3 to the Samsung Galaxy S8+.I have a pioneer AVH-8500-BHS with Samsung wireless Dongle. Will this set up work?
I hope so can not wait!
Sent from my SAMSUNG-SM-N900A using XDA Free mobile app
Click to expand...
Click to collapse
The S8 was confirmed working, the AVH-8500BHS is supported. Only thing I am not sure about is the Samsung wireless dongle but if it doesn't work a recent Miracast like the Actiontec Screenbeam mini 2 or the Microsoft wireless adapter V2 should do the trick.

For the S8 there's also a wired option. Somebody is using this and it says works well:
https://www.amazon.com/gp/product/B...ilpage_o02_s00&redirect=true&psc=1&pldnSite=1
https://www.amazon.com/gp/product/B...ilpage_o02_s01&redirect=true&psc=1&pldnSite=1
https://www.amazon.com/gp/product/B...ilpage_o01_s00&redirect=true&psc=1&pldnSite=1
It can charge the phone.

Just got it up and running on mate 9 pro. Works perfectly with Microsoft wireless adapter the only problem is the size of the screen. It doesn't show the screen I landscape as it should only partially. Any thoughts on this or is it a new launcher I need for my phone? If that's the case which one should I get?

kseagle said:
Just got it up and running on mate 9 pro. Works perfectly with Microsoft wireless adapter the only problem is the size of the screen. It doesn't show the screen I landscape as it should only partially. Any thoughts on this or is it a new launcher I need for my phone? If that's the case which one should I get?
Click to expand...
Click to collapse
It's probably the launcher, one that works well is Nova launcher. Just try it and you will know.

could it work with android 4.2/4.4. i'm tired with root the android

michau83 said:
could it work with android 4.2/4.4. i'm tired with root the android
Click to expand...
Click to collapse
Sorry but injecting gestures is only available since Android 7.

I have a Pioneer AVH-X2650BT and Moto Z phone.
Do I need any additional hardware for this to work?
Also is this app compatible with AVH-X2650 BT?

salmankhawar said:
I have a Pioneer AVH-X2650BT and Moto Z phone.
Do I need any additional hardware for this to work?
Also is this app compatible with AVH-X2650 BT?
Click to expand...
Click to collapse
The AVH-X2650BT has AppRadio USB and is not supported.

I have the SPH-DA110 which im trying to connect with my S7 will this software connect with the radio using the usb lead and mirror link or through bluetooth and no wires. I tried to use a MHL connection and its keep saying there is moisture in the connection through the HDMI port. but when its connected through the usb port it charged but will not connect in mirrorlink in appradio and im not sure if its the software (doesnt look very good)

azreal333 said:
I have the SPH-DA110 which im trying to connect with my S7 will this software connect with the radio using the usb lead and mirror link or through bluetooth and no wires. I tried to use a MHL connection and its keep saying there is moisture in the connection through the HDMI port. but when its connected through the usb port it charged but will not connect in mirrorlink in appradio and im not sure if its the software (doesnt look very good)
Click to expand...
Click to collapse
The video is via the HDMI input of the head unit and touch goes back via Bluetooth. The S7 doesn't support MHL so a wired connection isn't possible. What works is to cast the screen via a Miracast adapter like the Screenbeam Mini 2 or the Microsoft wireless adapter V2.

I am using my S8+ with rockscout and it is working pretty good. It is a little lagged and the screen is in portrait mode as opposed to landscape. What more will this app do. I am willing to buy it but I just want to know what make this better. I am just using a USB-c cable plugged into the back of the Appradio 4 so that might be a limitation at the moment.

jspector said:
I am using my S8+ with rockscout and it is working pretty good. It is a little lagged and the screen is in portrait mode as opposed to landscape. What more will this app do. I am willing to buy it but I just want to know what make this better. I am just using a USB-c cable plugged into the back of the Appradio 4 so that might be a limitation at the moment.
Click to expand...
Click to collapse
Search Youtube

I just loaded Appradio Unchained Rootless on my Verizon S8. I'm using the free Nova launcher. I have a Pioneer 4100 NEX, using the cables and HDMI converter that was recommended in another appradio thread (Towabo USB3.1 Type-C to HDMI adapter). The firmware in the Pioneer was just updated to 1.09. The 4100 is installed in a 2012 jeep JK using a PAC canbus adapter and a micro bypass.
Now appradio seems to work, set the input to other-HDMI and then expanded the screen to fit. I can control the phone from the radio BUT everytime I change to appradio, I lose sound from whatever I was using, be it Sirius, HD radio or the SD card. I have a friend that has the same setup but he's on a Dodge RAM and not on a canbus link. He had audio and can then bring up appradio and keeps his selected audio playing.
From the radio end, we are the same firmware, same HDMI adapter, same cables and feeding the adapter from a 2A+ dedicated USB-C cable. The only difference is he has the paid version of Nova Launcher and I have the free version.
I figure it's something I missed. Anyone have any suggestions?

Ok I have the S8+ Now with chromecast - problems
Area51© said:
The S8 was confirmed working, the AVH-8500BHS is supported. Only thing I am not sure about is the Samsung wireless dongle but if it doesn't work a recent Miracast like the Actiontec Screenbeam mini 2 or the Microsoft wireless adapter V2 should do the trick.
Click to expand...
Click to collapse
I have the S8+ and using chrome cast I have it all connected but something is strange. The screen wont cast to the head unit however the head unit will control my phone not sure what I am doing on how the setup should be to make it sync simply or quicker

Related

HTC One Dock to Desktop Solution

I came up with a simple solution for turning your HTC One into a semi-desktop environment. My goal was to create a connection path to a PC monitor, keyboard and mouse with a simple docking solution, a dock-and-go approach. Here is what I came up with and it works great:
1. HTC One (Sprint Red version, JB 4.1.2) w/ NFC Task Launcher
2. RoHS Dock (Model: I4SC-HTON) with micro-USB
3. Samsung TecTile
4. MenoTek MHL to HDMI Adapter with RCP
5. HDMI Cable
6. StarTech HDMI to DisplayPort converter
7. Lenovo ThinkVision PC Monitor
8. IOGEAR Multi-Link Bluetooth Keyboard with Touchpad GKM611B
The end result is that I come to work, dock my HTC One (NFC enabled) with the TecTile attached to the Dock to enable and search for my bluetooth keyboard/mouse. Once the peripherals are synched I toggle my monitor to the DisplayPort digital input and my Android desktop is ready to go. The entire process takes less than 1 minute. It allows me to operate independently from my business LAN using wifi or 4G, and from the comfort of my desk. The output is currently limited to 720p resolution, which I believe to be the MHL adapter, but I'm working on that. The above varies slightly with your specific hardware but the concept remains the same.
I've very happy with this solution and I wanted to share it with everyone here. :victory:
dhalmo said:
I came up with a simple solution for turning your HTC One into a semi-desktop environment. My goal was to create a connection path to a PC monitor, keyboard and mouse with a simple docking solution, a dock-and-go approach. Here is what I came up with and it works great:
1. HTC One (Sprint Red version, JB 4.1.2) w/ NFC Task Launcher
2. RoHS Dock (Model: I4SC-HTON) with micro-USB
3. Samsung TecTile
4. MenoTek MHL to HDMI Adapter with RCP
5. HDMI Cable
6. StarTech HDMI to DisplayPort converter
7. Lenovo ThinkVision PC Monitor
8. Logitech Wireless Touch Keyboard K400 with Built-In Multi-Touch Touchpad
The end result is that I come to work, dock my HTC One (NFC enabled) with the TecTile attached to the Dock to enable and search for my bluetooth keyboard/mouse. Once the peripherals are synched I toggle my monitor to the DisplayPort digital input and my Android desktop is ready to go. The entire process takes less than 1 minute. It allows me to operate independently from my business LAN using wifi or 4G, and from the comfort of my desk. The output is currently limited to 720p resolution, which I believe to be the MHL adapter, but I'm working on that. The above varies slightly with your specific hardware but the concept remains the same.
I've very happy with this solution and I wanted to share it with everyone here. :victory:
Click to expand...
Click to collapse
Sounds like a bit much. Depending on what you're needing it for, I guess some people could benefit. I just use AirDroid. As soon as I get to work I'm already connected to the office WiFi. Just go in and log in and I'm good to go. Can answer text messages, listen to music on my phone, view pictures, etc. Not a full experience, but it's enough for me.
eXplicit815 said:
Sounds like a bit much. Depending on what you're needing it for, I guess some people could benefit. I just use AirDroid. As soon as I get to work I'm already connected to the office WiFi. Just go in and log in and I'm good to go. Can answer text messages, listen to music on my phone, view pictures, etc. Not a full experience, but it's enough for me.
Click to expand...
Click to collapse
I used to use AirDroid too, but I found that I didn't like my texts and emails going through my office LAN and business PC. I prefered having an parallel computing environment independent of the office, but one that transitions seamlessly. I have to agree, overkill, but fun! Go with what works for you!!!:good:
dhalmo said:
I used to use AirDroid too, but I found that I didn't like my texts and emails going through my office LAN and business PC. I prefered having an parallel computing environment independent of the office, but one that transitions seamlessly. I have to agree, overkill, but fun! Go with what works for you!!!:good:
Click to expand...
Click to collapse
It's a great write-up, without a doubt. I may even try it myself just because I like doing stuff like that.

best alternative device to Chromecast in mirroring phone

I've been looking for a near-perfect solution to mirroring my Samsung note 3 but to no avail. Here's my usage scenario and criteria below:
Usage:
- play various video formats via Diceplayer
- reply to WhatsApp messages
- surf the web
- take notes with Evernote
Criteria:
- TRUE plug-and-play capability after 1 time setup ( there shouldn't be a need to adjust settings after the dongle is inserted into TV)
- no lag/latency problem
- TRUE mirroring capability (WYSIWYG, no limitations on what apps can or cannot be used on my Note 3)
- Big plus if it can also work with my wife's 5S
- Big plus if it is future proof
any suggestion please?
Thanks in advance for your help!
dylansmith said:
I've been looking for a near-perfect solution to mirroring my Samsung note 3 but to no avail. Here's my usage scenario and criteria below:
Usage:
- play various video formats via Diceplayer
- reply to WhatsApp messages
- surf the web
- take notes with Evernote
Criteria:
- TRUE plug-and-play capability after 1 time setup ( there shouldn't be a need to adjust settings after the dongle is inserted into TV)
- no lag/latency problem
- TRUE mirroring capability (WYSIWYG, no limitations on what apps can or cannot be used on my Note 3)
- Big plus if it can also work with my wife's 5S
- Big plus if it is future proof
any suggestion please?
Thanks in advance for your help!
Click to expand...
Click to collapse
Since you have a Samsung device, I recommend Samsung's AllShare Cast Wireless Hub unless you also have a Samsung TV that supports the function (or upgrading to a Samsung TV with it is an option). I got a new open-box one recently off eBay for about the price of Chromecast.
Basically you plug it into one of your TV's HDMI ports using the supplied slim HDMI cable or your own, plug the supplied MicroUSB cable into the supplied power adapter (or another MicroUSB wall plug that outputs 5V at 450+mA), then switch the TV to that input.
You'll get a screen with some device information and a pairing ID. On your phone/tablet, you go into Screen Mirroring, and when you get the list you long-press on it to use Passkey mode (some devices may support the button mode - mine does not) - plug in the passkey on screen and it pairs. After that when you engage screen mirroring it'll automatically try to reconnect.
(Side note: I believe this is how Chromecast setup should work - requiring a challenge-response that ensures you can see the connected TV...)
As far as performance goes, it feels about the same as Chromecast screen mirroring on my Galaxy S3. AllShare Cast might be a tiny bit faster, but it also seems to slightly affect my WiFi network performance, as WiFi Direct is essentially running an ad-hoc connection to the hub.
Also, you need line-of-sight with the hub. Its WiFi signal is not as powerful/sensitive as a normal WiFi router/AP.
There is a little bit of overscan (edges cut off) that I couldn't figure out how to get rid of. It's not in my TV settigs as my Chromecast is on the same TV input via HDMI switch, so I could see the difference flipping back and forth.
Other than those minor things, I think AllShare Cast works pretty well. If Chromecast screen mirroring didn't work for me, I would be using it. Actually my wife is still using AllShare Cast since her S3 is still on 4.2
Unfortunately I don't think anything's going to work on your wife's 5S, well, nothing except an AppleTV... but I could be wrong.
And as for future proof, there really is no such thing. Especially in the video world. Because almost everything appliance-like is built minimalistically and relies on a hardware decoder, once a new CODEC becomes mainstream, all the old devices get left in the dust.
dylansmith said:
I've been looking for a near-perfect solution to mirroring my Samsung note 3 but to no avail. Here's my usage scenario and criteria below:
Usage:
- play various video formats via Diceplayer
- reply to WhatsApp messages
- surf the web
- take notes with Evernote
Criteria:
- TRUE plug-and-play capability after 1 time setup ( there shouldn't be a need to adjust settings after the dongle is inserted into TV)
- no lag/latency problem
- TRUE mirroring capability (WYSIWYG, no limitations on what apps can or cannot be used on my Note 3)
- Big plus if it can also work with my wife's 5S
- Big plus if it is future proof
any suggestion please?
Thanks in advance for your help!
Click to expand...
Click to collapse
A Android stick/box with a rockchip processor
-dualcore = rk3066
-quad core = rk3188
-quad core = rk3288
can mirror your device via miracast and you can install apps via the playstore like evernote. You can find it on geekbuying.com or ebay for 50$
ex. Mk908II, CX-919, Minix x7 (it costs 120$ but you get excellent quality and service)
erdal67 said:
A Android stick/box with a rockchip processor
-dualcore = rk3066
-quad core = rk3188
-quad core = rk3288
can mirror your device via miracast and you can install apps via the playstore like evernote. You can find it on geekbuying.com or ebay for 50$
ex. Mk908II, CX-919, Minix x7 (it costs 120$ but you get excellent quality and service)
Click to expand...
Click to collapse
i'm using the MK908ii myself but didn't know it had the miracast function. just plowed through the settings but still could not find anything.
any idea how i can activate this function?
dylansmith said:
i'm using the MK908ii myself but didn't know it had the miracast function. just plowed through the settings but still could not find anything.
any idea how i can activate this function?
Click to expand...
Click to collapse
You should have a app called wifidisplay, click on it and set it up

[Android 4.1+] Headunit for Android Auto - 160117 - Self Mode+ other fixes, x86, 720p

"Headunit": The First, Best, and Only Headunit app for Android Auto, Now Open Source & Free !
Turn an Android tablet into an Android Auto compatible Headunit ! (With several limitations at this early time of course...)
Android N developer preview: http://forum.xda-developers.com/showpost.php?p=65749262&postcount=1165
If you purchased Headunit on Play before Google removed it: http://forum.xda-developers.com/gen...droid-auto-t3125252/post65015637#post65015637
160117 January 17: New Self mode & Car mode fix: http://forum.xda-developers.com/gen...droid-auto-t3125252/post64844560#post64844560
151224 December 24: 1280x720 and X86 support: http://forum.xda-developers.com/showpost.php?p=64466237&postcount=943
151128 November 28: Voice Input + Audio Output: http://forum.xda-developers.com/showpost.php?p=64045807&postcount=903
August 28 & 5 Voice Input etc: http://forum.xda-developers.com/showpost.php?p=62548380&postcount=724
USB OTG Y cables I've had success with: http://forum.xda-developers.com/showpost.php?p=62745966&postcount=792
Comments welcome: Proposal for a Private Website / Forum for the Headunit app and Automotive Android: http://forum.xda-developers.com/showpost.php?p=62207324&postcount=587
July 24 APK Immersive mode: http://forum.xda-developers.com/showpost.php?p=62014837&postcount=519
July 14b APK Standalone mode: http://forum.xda-developers.com/gen...oid-4-1-headunit-android-auto-t3125252/page43
July 11 APK: http://forum.xda-developers.com/gen...oid-4-1-headunit-android-auto-t3125252/page39
Quick summary of Google Play bans and final responses; I fixed each time & Google gave a different excuse each time: http://forum.xda-developers.com/gen...droid-auto-t3125252/post61632463#post61632463
Nexus 9 OTG charging w/ M developer preview & Nexus 7 2013 w/ Timur kernel/mods: http://forum.xda-developers.com/showpost.php?p=61632651&postcount=312
Nexus 7 2013 OTG charging while running Headunit w/ ElementalX kernel: http://forum.xda-developers.com/showpost.php?p=61593874&postcount=290
Now Open Source and Free ! http://forum.xda-developers.com/gen...droid-auto-t3125252/post61440441#post61440441
June 16 Release #5 APK: http://forum.xda-developers.com/showpost.php?p=61422602&postcount=163
Release #2 APK and instructions: http://forum.xda-developers.com/showpost.php?p=60894402&postcount=94
Thank you "All About Android" for covering the Headunit app in episode 218 ! http://forum.xda-developers.com/showpost.php?p=61412309&postcount=152
Android Auto over WiFi Direct is coming: http://forum.xda-developers.com/gen...oid-4-1-headunit-android-auto-t3125252/page16
June 16 APK: http://forum.xda-developers.com/gen...oid-4-1-headunit-android-auto-t3125252/page15
June 12 APK Auto-Start: http://forum.xda-developers.com/showpost.php?p=61321219&postcount=107
June 11 APK: http://forum.xda-developers.com/gen...unit-android-auto-t3125252/page8#post61287292
June 9 APK: http://forum.xda-developers.com/gen...roid-4-1-headunit-android-auto-t3125252/page5
Android Auto is Google's latest and greatest effort to provide automotive navigation, music, phone and other features in an environment that minimizes distraction.
The Headunit app is intended for 7 inch /17 cm or larger tablets.
A $100-200 Nexus 7 tablet mounted in the car is MUCH cheaper than $700-$1400 Pioneer devices.
A $300+ 10 inch/25+ cm tablet provides a much larger & nicer screen than 6 inch double-din units.
Original XDA Thread: http://forum.xda-developers.com/android-auto/android-auto-general/developer-mode-aa-t3059481
These are early, experimental releases. They should only be used for testing at this time.
Please note that Google has NOT released Android Auto specifications required to build a Headunit app such as this, except to headunit and auto OEMs who have paid fees and signed NDAs.
This app required over 500 hundred hours of painstaking reverse engineering (and many more to come), and another 500 or so as of mid July to build and test the app so far.
If you wish for apps like this that are professionally engineered, supported and updated, your financial support via Paypal donations is required, especially since Google will not allow Headunit apps on Play.
Help keep an independent developer working full-time++ on this cool new stuff.
Thanks for your support !
Mike.
What the heck is Android Auto, and why would I want it ?: http://forum.xda-developers.com/showpost.php?p=61114397&postcount=2
What devices and ROMs are supported ?: http://forum.xda-developers.com/showpost.php?p=61114397&postcount=3
How do I use the Headunit app?: http://forum.xda-developers.com/showpost.php?p=61114419&postcount=4
Troubleshooting: http://forum.xda-developers.com/showpost.php?p=61114437&postcount=5
Supported Phones running Android Auto: http://forum.xda-developers.com/showpost.php?p=61114468&postcount=6
Business Issues: Open Source & Pricing: http://forum.xda-developers.com/showpost.php?p=61114482&postcount=7
Feature Requests: http://forum.xda-developers.com/showpost.php?p=61114494&postcount=8
Coming Features: http://forum.xda-developers.com/showpost.php?p=61114500&postcount=9
Future of Android Auto: http://forum.xda-developers.com/showpost.php?p=61114532&postcount=10
What the heck is Android Auto, and why would I want it ?
Introduction / Different approaches:
There are many different approaches to running apps in a car, and they each have advantages and disadvantages.
Many people are happy to just install an Android tablet or Android based headunit and run apps much like they do outside of the car.
Others may mount their phone on the dash and use Android as they always do. They may plug it in to charge and might pair the phone's Bluetooth with their existing in-car audio system.
If you are using approaches like these, and you are happy with them, that's great ! I'm not a mission to convince you otherwise if you have decided these methods are best for you.
Android Auto:
Android Auto (AA) is Google's latest and greatest effort to provide automotive navigation, music, phone and other features in an environment that minimizes distraction.
AA was announced in 2014, and it's "app" first publicly released March 19, 2015, after Pioneer starting selling their AA compatible 4100/7100/8100-NEX headunits. Google did not seem ready to launch AA at that point, but Pioneer's early release of headunits seems to have forced this.
Apple has it's own rough equivalent to AA called Apple Car Play. Many who have seen both prefer AA, but iOS users also appreciate having more or less the same iOS UI they already know in their car.
How AA works (basic):
AA is not a mirroring solution like MirrorLink, Miracast or Apple Airplay. Mirroring solutions simply send phone screen video to an external, larger screen and return touch events. Thus the in-car screen is simply a blown-up version of the phone screen.
Mirroring solutions generally work with all existing apps. AA on the other hand, requires Android apps to have special AA compatible extensions added. Clearly this can be a disadvantage of AA. Few music and messaging apps can be used with AA, and the only mapping/navigation app supported is Google's.
With AA, Google mostly controls the User Interface (UI) as implemented in their AA "companion app". AA compatible apps CAN modify some of the color scheme and some related minor UI features, but the look and feel are largely Google designed and controlled.
Google has done this to minimize distraction. Although many of us will not be happy with Google's decisions. we should consider that the last things Google wants are: (1) laws against Android Auto, (2) bad publicity from distracted driving incidents, and (3) expensive lawsuits. Note that Google, Apple and the auto OEMs are reportedly negotiating who takes how much responsibility for the inevitable lawsuits, particularly in the US where multi-million dollar settlements regularly occur.
Google AA supports two types of AA compatible apps at present, with more (eg maps/navigation ?) coming in future: (1) Audio/music and (2) messaging. For the most part, audio/music AA extensions provide functions for starting/stopping/nexting/etc of the audio as well as functions to determine the music navigation hierarchy. Messaging AA extensions include sending a message to AA to be converted to speech as well as handling spoken replies.
Video and gaming apps will likely never be supported for the drivers position, at least while driving, for obvious reasons.
Many app developers are hesitating at this time to add AA extensions. At this time, there is very little revenue to be made by supporting AA (and the same has been seen for watch and TV apps). This should improve as more cars have AA installed, via OEM systems or aftermarket headunits.
So why would I want AA ?:
If you need access to ANY Android app, and not just the limited selection of AA compatible apps, then mirroring solutions will work better for you.
AA is more for people who want a solution that "just works" (although there are still many wrinkles to iron out), is well integrated, and has a common Google specified UI.
Less technically minded people will appreciate AA or Apple CarPlay, while Android power users may be happier with mounting a tablet or using an Android based (usually Chinese) HU.
An Android based HU which can run my Headunit app, may offer the best of both worlds. You can run any Android app when you need to, or run my HU app to get AA features. (At present nobody has reported success running my Headunit app on an Android based HU. I hope/presume I'll figure that out.)
I am personally convinced that AA will be very important for Google going forward. Controlling and getting the treasure-trove of data from connected cars is important to Google. We may not be far from the day when Google will get a commission when it successfully convinces us to pull over for specific fast food or auto maintenance. Want fries with your oil change ?
Because AA is important to Google, I feel confident it will not be abandoned, and will only get better as the years tick by, bugs are fixed, apps are AA enabled, etc.
Getting AA working:
Please, always do your best to drive responsibly and with a safe minimum of distraction. You assume all liability for following any of these or any other instructions.
First, your phone (or tablet) needs the AA companion app installed. US residents can install the Android Auto app from Play: https://play.google.com/store/apps/details?id=com.google.android.projection.gearhead and those outside the US can find APKs here: http://www.apkmirror.com/apk/google-inc/android-auto/ .
Next, you need an AA compatible aftermarket or auto OEM headunit. Auto OEM AA headunits (HUs) are just starting to come out for a limited selection of 2016 models. Aftermarket HUs like the Pioneer 4100/7100/8100-NEX devices are a good alternative. If a $500-700 HU is too expensive for you, that's where my Headunit app for tablets comes in, but there are some inherent disadvantages to such an app and a tablet is just one of the costs. More on this further below.
Ensure that your mobile device running the Google AA companion app is setup with a Google account. Make sure the Google apps are up-to-date, including the AA app, Google Play Services, Google Maps, and Google Play Music.
Now plug your mobile device USB into the HU. If all goes well you should see a series of prompts and screens on the HU and mobile device. If something complains that it's not safe to configure at this time, ensure your car is in the Park gear (or neutral for manual), that the emergency/parking brake is fully engaged, and press down on the brake pedal. My 4100-NEX is setup for testing, outside of a car, and I simply connect the green wire to ground or 12 volt negative line. I'm not sure that this will work well if your HU is installed such that the green wire is connected to other things.
Hopefully you will now see the main AA Intro/Google Now Screen. Select functions from the "rail" at bottom of screen: In order: Maps/navigation, Phone, Google Now, Music, and "Other/OEM".
Your mobile device should show a mostly black AA screen indicating the device is in AA/car mode. You CAN escape this and run other apps, but it is not recommended.
While your mobile device is connected via USB, it should charge. Turn the device screen off to maximize charging and minimize heat build up. Using Maps/Navigation will use the device GPS (unless the HU provides it) and this contributes to heating of the device and minimizes charging.
How AA works (technical):
Basically, the AA app creates a special environment in which it draws to a virtual screen instead of the real screen. The resulting video is encoded as an H.264 stream and sent via USB to the HU. The HU responds with touch-screen events which the AA app interprets similarly to normal Android app operation.
AA compatible audio apps contain AA audio extensions, which can provide control of audio app playback and provide information about which audio streams or files can be played. The audio app uses it's normal Android audio APIs, which the AA "app" hooks in order to send the audio to the HU, over USB or Bluetooth. I refer to the AA "app" with parentheses, because it has many hooks into Android internals which normal apps do not have access to. Thus, much of the AA "app" is really system level code, though there is a minor UI for some basic configuration and to provide access to AA developer mode functions.
The AA USB protocol also includes functions for accessing sensors, including parking brake status, gear position, fuel tank level, road speed, engine speed and many more. Only a few sensor functions are fully implemented at this time however, such as parking brake status to determine if it is safe to do configuration.
Google has referred to AA HU's as "dumb terminals". But IMO a true "dumb terminal" would simply be a touchscreen with a DVI/HDMI like interface. AA HUs DO need to have some "smarts", such as H.264 video decoding, Bluetooth and sensor signal processing.
Hardware HUs also generally provide many other functions that work standalone with no mobile device, such as AM/FM/HD radio, CD player and vendor specific apps that run on the HU.
Why would I want your Headunit app ?:
- For the customization opportunities.
I haven't seen any 10 inch / 25 cm screens on auto OEM or aftermarket HUs. Large tablets however are readily available with many choices for screens and other hardware.
- To use or experiment with Android Auto without buying a new car or a $500+ hardware headunit.
Note however that besides the tablet, you may also need a USB OTG Y cable and a powered USB hub in order to properly charge the mobile device, and tablet, without running down the tablet battery.
Some devices (for tablets, mostly non-Samsung) may need special kernels in order to charge while acting as a USB host.
Why can't we just run our phone in an AA standalone mode, without tablet or Headunit ?:
Mostly because Google does not want that. They consider screens under 7 inches / 17 cm to be distracting. Google seems to eventually want "Android in the car", so Google may be working on something like a standalone mode (for what would essentially be an Android tablet in the car), but this is nothing but rumours so far.
I know a LOT of people would REALLY like a standalone mode, so I am likely to explore the feasibility of this in the near future. I am sure that Google would disapprove of this and would eventually take measures to sabotage such a thing, so it's a tricky prospect.
I think an AA standalone mode "app" (more like system mods than an app, same as AA "app" itself) would require a rooted device. It likely would also require Xposed (or similar) to hook and modify various system functions.
Add it all up and it turns into a very difficult venture with limited returns on time invested.
A Headunit app running on a 2nd device/tablet is more feasible as Google can not just change the AA protocol overnight, and it does not require root on the tablet (except for charging of non-Samsung tablets, sigh...)
Are there any other AA compatible Headunit apps ?
At this time no, my Headunit app is the first and only of it's kind.
Google has not publicly released documentation or code to build a Headunit app, and may never do so.
It has so far taken me over 600 hours of work to reverse engineer the AA protocol and build this app. With open docs/code it might have taken only 100-200 hours at most.
I've read a report that Google must certify AA HU implementations before they are "allowed". This is likely part of the agreement and NDAs that auto and HU OEMs must sign to join Googles "Open Auto" alliance, beyond whatever fees are charged.
GENIVI appears to have plans to "open source" an AA client implementation. But AFAICT, GENIVI "open source" is not entirely public and open. I suspect Google would want to ensure that any users of such source code adhere to their requirements.
Pioneer HUs run Android. Their AA client implementation is a binary, so it's somewhat similar to an HU app. But it's specific to their hardware and will not work on general purpose Android tablets or phones.
There may be other Headunit apps to come, but I have not heard of any, beyond one persons desire to create an open source app in the long term.
What devices and ROMs are supported ?
Root is NOT required. (But root and a custom kernel may be needed on non-Samsung tablets in order to allow the tablet to charge while it's in USB host mode.)
Most Android 4.1+ ROMs should be able to work.
ICS 4.0 and earlier devices/ROMs do not have the needed video decoder and can never work. (Except by building my own decoder with FFMPeg or whatever, which is way too much work for too little return.)
A working H.264 video decoder is required, but most quality Android 4.1+ devices should have this. (Chinese/budget devices may use slow and/or buggy implementations.)
Only devices that support USB host mode are physically capable of working. Many or most tablets released in the last 2 years should support USB host mode.
Full, official support is limited to devices I own. With sufficient demand for a new device, I may purchase that device and add official support, if possible.
These are the tablets that I own and test:
Nexus 7 2012 stock.
Nexus 7 2013 stock.
Nexus 9 2014 stock.
Xperia Z2 Tablet stock. CM12 tested OK too.
Many other devices will work and I will do my best to support them.
Phones can work as a headunit, but tablets of 7 inches/17 cm or greater are recommended. Smaller screens are more distracting and can risk your safety.
How do I use the Headunit app?
At this time I can't recommend this for use while driving. It's ONLY for testing within the safety of a home or office... If you can't understand that this Headunit app is still VERY experimental and potentially very distracting while driving, then please don't run it. It's not my fault in any respect or measure if you hit a tree or kill people; it's ALL on you... You assume all responsibility for collisions, injury or the advent of Skynet...
App requires Android 4.1 ICS or higher, but I've mostly tested on Android 4.4 KK, 5.0 and 5.1 Lollipop..
I tested successfully on these, for the Headunit/Tablet side running my app:
Tablets are recommended for a decent size screen in a vehicle:
Xperia Z2 Tablet - CM12 - This 10" screen is wonderful compared to the 7 inch/17 cm 800x480 Pioneer 4100-NEX screen, despite that the video is still only 800x480 at this time.
Nexus 9 - stock - This looks pretty nice too and the CPU power helps make it look good and pretty lag free.
Nexus 7 2013 - stock
Nexus 7 2012 - stock
Phones can also work, but small screens are less safe so I can only recommend these for testing:
HTC One M8 - stock
HTC One M7 - CM12
HTC One XL - CM12
Xperia Z - Lollipop
Xperia Z1 - CM12/FXP
Moto G - CM12
GT-N7100 Note 2 - CM11, but with some video issues.
These phones have major issues or did not work for me:
GT-I9300 GS3 - CM12 unofficial
GT-N7000 Note1 - CM11
GT-I9100 - Android 5.1 ROM
GT-I9000 - Android 5.1 ROM
Note that Headunit/Tablet side issues are largely separate from Phone/Mobile Device side issues. Phones that do not work with Pioneer or other AA head units will not work with this app either, and only Google and the phone OEMs can fix that. This includes MANY very popular Samsung devices. I note that my older Samsung devices also have issues on the Headunit side, and this may be related to general USB issues on Samsungs. (?)
The Headunit/Tablet side running the Headunit app needs to connect to the phone running AA with a USB OTG cable. The OTG cable small micro-USB side needs to plug into the Headunit side.
Many devices can do USB Host for the Headunit side, but can't supply any power to the phone. For these devices a powered USB hub is required, and is recommended for all devices anyway, or the Tablet/Headunit device will quickly lose power to running the phone device.
The phone running AA plugs into the USB hub output side, and should be the only device so plugged in (or the device my app connects to will be random-ish, with HTCs having highest priority.)
When they are all plugged, be patient and wait at least 6 seconds after plugging the USB before starting my app. Most likely the Gallery app will open on the Headunit side. This is annoying, but at least it confirms the connection is good. You may have to wait, then hit Back to exit Gallery. If you get any popups, hit Back or Cancel; you might get several.
Latest AA companion apps to run on the phone side are here: http://www.apkmirror.com/apk/google-inc/android-auto/ This requires Android 5.0 Lollipop+ on the phone side as per Googles' decision, and also requires Google Mobile/Play services to be installed and an account set up.
Now you can start the Headunit. You should be prompted to allow access to USB twice. Select OK both times. Don't bother to check the "Remember" box because it never works and it's a silly Google thing. Better solutions are possible, especially if rooted.
If you have never connected the phone with AA to a headunit before, you will be prompted to do a bunch of stuff on the phone side. If you are outside the US you must manually update to the latest AA app from APKMirror etc. You may have to download Maps and Play Music if you don't have yet, and say Yes or "Standard" etc, to various prompts.
After all this, hopefully you will see video on the Headunit screen. You will likely see a safety warning prompt etc. Read it and understand it, and select OK if you dare.
Hopefully you will now come to the main/home/Overview/Now screen of AA. On some devices, video may be imperfect. Select different functions on the "rail" at bottom to help clear it up.
Touch works, but not Multi-touch yet.
Audio output was through the phone last I looked, but microphone does not work.
If you hit Back while in the app, it should exit and the AA connection is broken.
To open a new AA connection/restart the app you MUST disconnect and reconnect the USB, at any point in the chain.
It generally seems possible to turn the screen off and return to it after powering it back on, but if the orientation changes from landscape this may not work. Same for leaving the app with the Home or Recents button; if it switches to portrait, you can't get the video back and must stop the app, reconnect USB and restart the app.
I'm finding that quite a few of my phones running custom ROMs will not run AA on the phone side properly. In some cases a custom DPI really messes up the video dimensions and you can't even select the startup OK button. I see this on my One M7 with CM12 and many people see the same on other phones w/ custom ROMs, whether using a Pioneer headunit or this app.
Enjoy responsibly.
Troubleshooting:
Nothing more disheartening than trying a cool new app, and.... it doesn't work.
Public Enemy #1: Cheap/Bad USB OTG cables.
I got 3 cheap OTG cables and 2 straight and 2 right angle adapters a few months ago. The cables seemed OK in the beginning and now they're all flaky. The adapters didn't last as long and some were flaky new. 7 cables and adapters and they're all garbage.
I've been happy for a few weeks at least with these $10 Y cables that can power/charge both devices. I'll see if they're still good in the next few months: http://www.amazon.com/Micro-Cable-Power-Samsung-AtomicMarket/dp/B009YPYORM
But even with the best cables, your phone and tablet micro-USB ports can be a factor too. Car mounting, with constant vibrations and bumps adds to the challenge.
When I get Android Auto over Wifi working better, I hope USB will just become a backup connection. But wifi has it's own issues too.
Cheap or Chinese devices and hardware HUs are a "crap-shoot": So far I don't think I've had a single success report for Chinese devices. The ROMs and video decoding are often bad or VERY slow and USB is questionable. Some devices do not support USB Host mode or have a bad software implementation.
I recommend Nexus or good quality tablets from Sony or maybe Samsung. All tablets that I own work and are officially supported, including: Nexus 7 2012, Nexus 7 2013, Nexus 9 and Sony Xperia Z2 tablet.
July 24 or later releases recommended for testing: http://forum.xda-developers.com/showpost.php?p=62014837&postcount=519http://forum.xda-developers.com/gen...oid-4-1-headunit-android-auto-t3125252/page39
July 24 has a bottom "Test" button to test H.264 video decoder (some phone/ROM decoders are bad or VERY slow.)
Also has a bottom "SUsb" button for devices with USB Host Mode supporting kernels even without Android support.
Also allows manual USB device selection when automatic doesn't work.
MANY possible fixes:
- You must have 2 devices for the Headunit app, so try reversing them to see if that works. This requires the Android Auto app and Google app, Google Play Music, Google Now and Google Maps to be installed on both devices of course.
- You usually need 2 cables: The micro-USB side of an OTG cable to the Headunit app device/tablet, and the full-size USB connection to a "normal" phone/USB cable connected to the Android Auto device/phone.
At least one person reversed the cables, without reversing HU and AA devices and it worked. USB can be funny; there are MANY possible jumper, resistors, wires etc combinations, especially with specialty high current charging cables.
- With some devices, an OTG Y cable MUST be powered, with others it MUST NOT be powered, and for some it doesn't matter and power can even be stopped and started with no effect.
- "Fast Charge" should be disabled if it's a kernel setting. Saw this with Elemental-X kernel on Nexus 7 2013. This kernel also has a setting to allow charging in USB Host mode.
- Sometimes enabling USB Debugging helps, sometimes disabling, sometimes turning it off, then back on. Do this at both ends: Headunit app device and Android Auto device.
- Unplug and replug cables, at both ends and in between. Ensure they are firmly pushed together. July 11 release allows you to see devices disappearing and re-appearing if cable connections are flaky and moved.
- Before starting Headunit app, plug all cables together. If Camera Importer or Gallery, or other apps pop up, hit Cancel or Back to deal with them first. Then after a few seconds of no more popups, NOW start the Headunit app. Plugging/unplugging while the app is running may work but is less successful than starting the app after plugging.
- Some devices/ROMs have various USB settings to try, such as "Charge Only", MTP, etc.
- Use the Exit button or Back key to terminate the Headunit app and try again. It kills it's own process for an extra fresh start next time.
- Use Recents button to return to the Headunit app if Android Auto covers it.
- Avoid screen switching to Portrait mode for best chances of success. Home-screens that force portrait mode can create problems, as can lock-screens.
- Self or SUsb modes require SU/root access. Sometimes the SU prompt is covered and not visible. In such cases manual SU configuration, or setting SU default to "Grant" can help.
Supported Phones running Android Auto:
Any phone that works with hardware headunits, such as Pioneer 4100/7100/8100-NEX, should also work with this Headunit app.
Note: This list is for devices running Android Auto. It is NOT for connected devices running the Headunit app, except for Self standalone mode where one device runs both.
Devices that I tested OK:
Galaxy S3 GT-I9300 CM12.
HTC One M7 stock & CM12.
HTC One M8 stock & CM12.
Xperia Z stock & CM11.
Xperia Z1 stock & CM11.
Xperia Z2 stock & CM11.
Moto G stock & CM12.
EDIT: I wrote this page before Google banned Headunit from Play and before I made it free and open source, but please feel free to read my thoughts written before that below.
Soliciting donations sucks. Thanks much to those that have and those that will. But VERY few people do. At some point I will likely have to return to a commercial model.
Those who donated, or bought Headunit on Play before the ban will become most honoured customers retroactively.
Business Issues:
Yes, I am (attempting) to run a business here. I hope I don't have to explain or apologize for trying to make a minimal income to help support my wife, kids, cats, pay for a house, cars, and all the usual basic accoutrements of life like food, electric, fuel, etc, etc...
I have been working 60-70 hour weeks for over 4 years now on my apps, mostly the Spirit FM apps: Spirit1, Spirit2, Spirit Transmit. I have no other income except my apps.
I am somewhat disappointed that I've been making a small fraction of what I made for decades doing contract or salaried work for a plethora of tech companies.
I have seen my Spirit FM income dropping for the last few years, and have entered into the connected car apps space in an effort to make a better income.
I hope to serve your app desires and appreciate the financial support of everyone who can afford at least roughly the price of a meal at McDonalds, or there-abouts.
Open Source:
Yes, I know EVERYONE wants free and open source software... I LOVE open source; my career has been built mostly on Linux (and Android) since 1997.
But NONE of the 20-odd companies I've done contract or salaried work for in those 18 years has open sourced their code.
Very, VERY few companies turn a profit with open source. How many app devs can you show me that make a decent living exclusively or primarily with open source ? Over 99.9% are based on closed source.
Kickstarter / IndieGogo etc ? LOL. Show me a lone app dev who has done well with that route.
If someone were to sponsor me with a decent income I'd be happy to open source everything. But that's not too likely and I'm not seeking that.
Google is keeping their AA code secret and unpublished, and they do the same with their premium apps like GMail, while the AOSP apps like EMail languish.
Pricing:
Pricing software is a funny thing. If no technical support or packaging are provided (and there are no advertising costs), the incremental cost of 1 more copy of an app is zero.
And yet if you hire people (or yourself) and pay a decent, competitive rate, the R&D costs for the 1st copy can be in the $millions for many modern apps.
There is no such thing as a "fair price"* for an app. Many think apps must be $0.99 for something simpler, or up to $10 for something more complex, and in rarer cases, $20-40-100 or much more.
(*Fair Price: If we talk about technical support, a "fair price" becomes more feasible. If my time is worth $60 per hour (and it should be much more in this field for very short term work), then 10 minutes of total time spent to support someone is worth $10. But that ignores ALL the time it takes to build and test apps.)
The number of people who will buy an app at some given price are a major determinant for a developer trying to make a decent living.
A popular non-root app for "Joe Average" that millions of people might use might be $0.99 or free with ads.
An app only for Android enthusiasts who root, ROM and install Xposed on the other hand will have a very limited market, and price must be high for a chance to make a decent living.
I've noted that there are several examples of specialist Automotive apps that sell in the $20-40 range. Then there are apps like Torque that may sell for $3-5 but have a much bigger market, and the income allows people to be hired, above and beyond supporting a single independent developer.
At this time, I've put this Headunit app for sale at less than $9 US or 8 Euro (after 20% VAT Euro prices are under 10 Euro, but I get none of that).
Note that Google takes 30% (42% markup !) so I only get about $6 US per app. That hardly buys a Big Mac these days...
My desire is to license this Headunit app on a per device basis, though Google doesn't provide any easy method to do so. So if you use this app in 2 cars, but with only one Play store purchase, I'd appreciate consideration via Paypal. There is NO DRM in this app and I REALLY hope not to use any form of copy protection. DRM is mostly trouble.
I reserve the right to change price at any time. As the app becomes more fully featured, I may raise the price as needed to get sufficient income to work on this full time.
Without sufficient financial support, I'll just have to spend more time on other app opportunities. So if you use and like this app (or just want to support such) please support me so I can support you.
And please help spread the word about this app. I'd rather spend time working on wonderful new features and fixing bugs (LOL) than spending time doing marketing stuff, or spending/wasting money on advertising.
Thanks !
Mike.
Feature Requests:
I'm always happy to hear what you want.... Speak up !
Coming Features:
(Originally written in June. Amended August.)
Features I guarantee I will try to added in the relatively short term of 1-3 months:
- Automatic start at plugin.
- Bypass USB permissions with root. (July 24 "SUsb" button)
- Multitouch support (pinch zoom GMaps)
- Resolution increase & switching, if possible. 800x480 at present, 1280x720, 1920x1080. (July 24 still does not seem possible. No hardware HUs higher than 800x480 so Google hasn't enabled ?)
Future of Android Auto:
Built-in, Brought in, Beamed in.
Android in the car
Self driving cars
Flying cars
Skynet^H^H^H^H^H^H
"Headunit" - Build an AA Headunit with a $165 tablet...
As I posted on the original thread:
240 downloads of the Free APK now... http://forum.xda-developers.com/showpost.php?p=60894402&postcount=94
"Headunit" is the app name I've settled on. Short & sweet.
Want to see this Headunit app fixed and improved on a regular basis ?
Then I need your help...
First need is some IMO well deserved publicity. There is no other app like this and I think there is a need...
I saw LOTS of excitement on Android enthusiast sites about Android Auto. And a LOT of excitement dissipated hearing that a $700 Headunit or new car was required.
So wouldn't turning a $165 Nexus 7 2013 tablet into a basic AA Headunit with an app restore some excitement ?
I've been busy on the tech side, but to keep this project moving, people need to find out about it.
I've started a new thread here for all further discussion about my Headunit app: http://forum.xda-developers.com/general/paid-software/android-4-1-headunit-android-auto-t3125252
If it seems worthy to you, please consider clicking on "Submit Thread as News Tip" at top right of that thread.
Most Android news and discussion sites have similar functions to submit news tips. If it comes from people like you, I'd think it has more weight than me trying to promote my new app.
XDA is kinda, sorta, not supposed to be used to SELL things (and that's kinda vague & fuzzy, and there IS a section for paid apps, where my new thread is), and I understand and respect that...
But truth is that my second, and perhaps most important need, in order to support YOU, is for some "little bits" of support from you... See my new thread or sig for the new paid APK on Play.
There are other, Android Auto/Connected Car app ideas I have, should this one garner insufficient support. Feel free to comment:
- Use any media player (or messenging) with AA, where it does not have AA extensions.
- App to connect sensors, + via ODB and maybe Torque like functionality.
- Standalone mode for AA running on a phone. Will likely require root and Xposed and LOTS of work and workaround when Google sabotages it.
- Customization of Android Auto via root/Xposed app; Change anything from backgrounds to color to rules that AA imposes in the name of safety and anything else that needs a mod.
Thanks !
Mike ( [email protected] )
Hi!
I've just purchased your headunit app. I've attempted to connect it, but am unable to get it working. I'm really excited to see something like this, and can probably help you debug it if needed.
My devices:
- Nexus 7 (2012 Wifi), running stock Android 5.1.1, stock recovery, rooted with Nexus Root Toolkit
- Nexus 4, running stock Android 5.1.1, custom recovery, rooted with Nexus Root Toolkit
Cables:
- USB OTG cable, purchased some time ago, but known to be functional -- I've used it on my Nexus 4 to connect a microSD reader.
- Micro USB (male) connector from USB OTG cable plugged into Nexus 7.
- Charging cable plugged into micro USB connector (female) on USB OTG cable.
- Standard micro USB connected from Nexus 4 to USB A (female) port on USB OTG cable.
- Both devices show as charging.
Problem:
- When starting Headunit app, the screen stays black (with only standard on-screen controls, and never prompts me on either device for anything).
- I have also tested this in reverse, by sideloading the Headunit APK onto my Nexus 4 (Google Play Store said incompatible, but what do they know? ), and sideloading the Android Auto app onto my Nexus 7. I reversed the cabling, so that the USB OTG cable is plugged into the Nexus 4 as the host device. Same results.
- I've tried various combinations of unplugging and replugging, force closing and restarting apps, etc.
What's the next step in debugging this setup?
jpreston84 said:
Hi!
I've just purchased your headunit app. I've attempted to connect it, but am unable to get it working. I'm really excited to see something like this, and can probably help you debug it if needed.
My devices:
- Nexus 7 (2012 Wifi), running stock Android 5.1.1, stock recovery, rooted with Nexus Root Toolkit
- Nexus 4, running stock Android 5.1.1, custom recovery, rooted with Nexus Root Toolkit
Cables:
- USB OTG cable, purchased some time ago, but known to be functional -- I've used it on my Nexus 4 to connect a microSD reader.
- Micro USB (male) connector from USB OTG cable plugged into Nexus 7.
- Charging cable plugged into micro USB connector (female) on USB OTG cable.
- Standard micro USB connected from Nexus 4 to USB A (female) port on USB OTG cable.
- Both devices show as charging.
Problem:
- When starting Headunit app, the screen stays black (with only standard on-screen controls, and never prompts me on either device for anything).
- I have also tested this in reverse, by sideloading the Headunit APK onto my Nexus 4 (Google Play Store said incompatible, but what do they know? ), and sideloading the Android Auto app onto my Nexus 7. I reversed the cabling, so that the USB OTG cable is plugged into the Nexus 4 as the host device. Same results.
- I've tried various combinations of unplugging and replugging, force closing and restarting apps, etc.
What's the next step in debugging this setup?
Click to expand...
Click to collapse
Hi, Thanks for your support.
Send me an email at [email protected] and I'll send you a debug release. Or I'll PM you a link when I get one built in a few hours. Are you able to capture a logcat or should I add an easy "Send logcat" button ?
Some quick googling tells me the stock Nexus 4 does not support USB OTG (ie running the headunit app). But some kernels enable this and this is the first thread I saw about that: http://forum.xda-developers.com/nex...g-externally-powered-usb-otg-t2181820/page154
The app specifies that USB OTG is required, and I thought that was a great way to prevent people from purchasing on incompatible devices. But now that I see Nexus 4 (and I'm sure many other devices) can do OTG with a custom kernel, I guess I should remove that as a hard requirement. A popup warning would be better.
I have that same Nexus 7 2012 with the latest Android 5.1.1 (unrooted even) and pretty much stock, and all released versions of the Headunit app work on it. So I feel confident that the hardware and software work OK together.
And AFAIK, Android Auto runs fine on stock Nexus 4.
If you aren't getting prompted for USB permissions on the Headunit app side, that seems to indicate a connection problem.
Can you stop charging the Nexus 7 and reboot it to see if that helps ? My understanding is that Nexus devices can't do USB host mode and charge at the same time. Custom kernels are needed to allow this.
If you have a plain OTG cable without a charging connection please try that also. Ensure that the regular USB cable supports data tranfer. Some are for charging only.
My test setup is:
- 1 regular USB cable: large male (plugged into OTG large female) to micro-USB male (plugged into Android Auto phone).
- 1 OTG cable: large femaie (plugged into regular large male) to micro-USB male (plugged into Headunit device).
Sometimes between the 2 cables I insert a powered USB hub, but a straight connection seems to work for both Nexus 7's, Nexus 9 and Xperia Z2 tablet, though it does drain the Headunit device battery to charge the Android Auto device.
A good sign that the cabling is working is seeing the Gallery app opening on the Headunit device when they are plugged. Android Auto device pictures and videos are shown via USB MTP I guess.
I'm going to add a startup screen that shows connected USB devices and that can be used for trouble-shooting.
This thread needs to be woken up...
If you have ANY questions or comments, please post !
I'm encouraged to see the Headunit app on Play has had 2 confirmed sales in the last 2 days; there are also 9 cancels (boo !) and 3 unconfirmed....
Pretty Good I think for the first few days of a new app.... Could be more if I remove the strict USB host requirement, but probably more disappointed cancellers too.
I appreciate Google Play reviews from anyone who has purchased and/or cancelled.
Right now I have two 1 star reviews on Play to deal with; thankfully Google lets us reply to reviews now.
Here's what I just added to the Play Store description:
No risk/full refund within 90 days. Just email 15 digit order ID or email of purchase to [email protected] . But "be warned" that I WILL do my best to get this app working for you and make you happy, or at least explain why your device may be incompatible...
Click to expand...
Click to collapse
Message to app reviewers on Play:
The Reviews section of Google Play has a 350 letter maximum. It is impossible to provide good technical support with that limit.
Please email me [email protected] for private support.
But I prefer to discuss publicly for everyone's benefit if you are registered or don't mind registering at XDA Developers Forum. Headunit Thread: http://forum.xda-developers.com/general/paid-software/android-4-1-headunit-android-auto-t3125252
If Headunit is working well for you, Great !
For problems, please read on:
I updated the Play Store description with this:
NOTE: Requires 2 devices ! Needs an Android 4.1+ tablet (that supports USB Host mode) running this Headunit app connected to an Android 5.0+ phone running Android Auto. Connection requires 1 standard phone USB cable and a special USB OTG cable connected to the Headunit app device.
No risk/full refund within 90 days. Just email 15 digit order ID or email of purchase to [email protected] . But "be warned" that I WILL do my best to get this app working for you and make you happy, or at least explain why your device may be incompatible...
Click to expand...
Click to collapse
I hope you understand this is the first release of a new type of app, and that I'm still calling it "experimental".
I will do my best to support as many devices as I can. But some devices will never work, particularly those that can not support "USB Host Mode".
The most common problem will be USB cable connection problems. Generally, you will need at least 2 cables:
1 USB OTG cable connected to tablet or other device running the Headunit app.
1 Regular USB cable connected to phone running Android Auto.
The cables are connected together of course, directly or though a hub. Sometimes you may need to insert a powered USB hub between the cables, with the powered side going to the Android Auto phone.
Sometimes connections may be loose. Ensure that (at least) all 3 connections are securely made. Gently try to push the plugs in just a little deeper to see if it goes farther. This has fixed it for me more than once.
I will put some better debugging and logging options in the next release of this app.
There is a LOT more information about how to get the Headunit app working, and some trouble-shooting hints in the First 10 posts of thread: http://forum.xda-developers.com/general/paid-software/android-4-1-headunit-android-auto-t3125252
Hi, good work on getting this started. For me the deal breaker feature down the line would be car integration, namely:
Bluetooth calls take place over car mic and speakers
Steering wheel controls (volume, answer, next track, etc.)
I imagine some support for the pioneer adapter that allows this would be feasible.
Any plans or knowledge about that?
ok, seems to be working ok (although slowly) on a nexus 7 2012 (as headunit). does not work at all on a nexus 7 2013 (as headunit), just a black screen without any notices.
I would really like to try this, but the USB port of my N7 2012 is broken, and I still haven't fixed it :/
Sent using my nexus⁴ running Euphoria 1.1 with Xposed and hells-Core B78
Maxr1998 said:
I would really like to try this, but the USB port of my N7 2012 is broken, and I still haven't fixed it :/
Click to expand...
Click to collapse
I really hope that Google can enable Android Auto over WiFi soon. If not, I will consider mods that would allow this. But it would require root on both sides; an AA standalone mode (that only needs one rooted device) may be desirable to more people.
Android Auto over Wifi would solve USB specific connection problems, like the need for USB Host mode on the Headunit and the associated "charging while in USB host mode" problems that usually requite a custom kernel.
ldti said:
ok, seems to be working ok (although slowly) on a nexus 7 2012 (as headunit). does not work at all on a nexus 7 2013 (as headunit), just a black screen without any notices.
Click to expand...
Click to collapse
Good start...
My N7 2012 seems to have good video speed, but I only use it for testing so I have very few apps and they aren't doing many background tasks.
Does the video have defects or does it look accurate ? I have seen slowness and defects together, but mostly on my older, slower phones.
The release I'm working on now has better debbuging capabilities. I'll try to post a new version within the next 12 hours.
Can I presume both Nexus 7's are stock ? Root and recovery shouldn't matter, but a custom kernel (or ROM) could make a big difference.

Samsung dex

Hi all. I preordered the note 8 and here in Croatia as a gift I'm getting the dex station. So I'm thinking of buying all the dex peripherals before it arrives so I'm ready to use it when it finally does arrive. I'm going to be connecting dex to my tv so I'm going to get a wireless mouse and wireless keyboard. But my question is since both the mouse and keyboard use Bluetooth and i know Bluetooth 5.0 can connect 2 things at a time will I still be able t9 connect a 3rd device (Bluetooth earpiece because I think if someone calls me when I'm using dex it will be kinda easier to use an earpiece) or another phone to my note 8 to transfer files?
Would really appreciate any help. Thanks
Just use wireless keyboard and mouse instead of Bluetooth. There are two USB ports one for thumb drive or other usb devices and the other for mouse and keyboard...then no issue with Bluetooth.
Is there a benefit to bluetooth mouse and keyboard? Or do you have plans for both usb ports?
I am going to try an external optical drive to see if it can read disks.
Is there a mouse/keyboard combo that uses one bluetooth connection?
Tnx for your answer. I'm not really an expert in these things so I kinda overlooked the fact that I can connect the mouse wirelessly without Bluetooth. I'm getting this mouse https://www.amazon.com/Logitech-Any...g=androidcentralb-20&ascsubtag=UUacUdUnU61031
And this keyboard
https://www.amazon.com/dp/B00X5P8BJO/?tag=androidcentralb-20&ascsubtag=UUacUdUnU61031
Seems the keyboard has to use Bluetooth though. Have you checked if Bluetooth 5.0 really works with 2 devices at the same time on the s8/+?
I have been reading something that it doesn't because android itself doesn't support It?
Also do you know if its possible to connect an external hard disc to dex? Tnx
First of all, DeX is a brilliant device and does exactly what is supposed to do!
Second, in order to get Note8 connected to DeX you NEED to power the station ONLY with the original power unit which came with Note8! No other charger will work with DeX!
Third: in order to use an external USB stick/ HDD / SSD, you NEED to install inside the Note8 an application. This app is Total Commander (the legendary one done for Win 95 and used further even as FTP standalone on each and every Windows version). However, to get the above external device to use it, you will NEED a plugin for Total Commander - the so-called Microsoft exFAT/NTFS for USB mounter! This comes with a price and has several options, see below:
• Microsoft NTFS: $4.99
• Microsoft exFAT: $5.99 (*for non-TV devices only)
• HFS+: $4.99 (OSX format)
• FAT32: $4.99
• All file system support pack: $9.99
Gplay LINK
The above is the ONLY method to get an external device working with DeX.
Fourth: I would suggest to use a wired mouse, not a BT one! And a keyboard can also be used with Android interface (same as a windows 7 for example - is a screen keyboard).
Stonewolf said:
First of all
Click to expand...
Click to collapse
But you are 6 months too late...
Sent from my Note 8 using XDA Labs
I use a Bluetooth keyboard(logitech), Bluetooth mouse (Microsoft) and Bluetooth headphones (Marshall) with DeX and they work well, no connection issues whatsoever, so you should be able to connect more than 2 Bluetooth devices without any issues (SM-N950F)

Witch products do you use to connect Mi 8 on a external Display?

Hi guys, can you please link products do connect Mi 8 on a external Display?
If you have one, can you put links here?
I'm trying to find a way to use on my TV
The are usb type-c to hdmi converters.
Anyway, the maximum speed of the USB on this mobiles is really slow (30MB/s). It's theoretically able to provide a good video but in practice it's not.
mi 8 don't support mhl over usb c so it's not possible
I'm using mibox 3. it works good.
I am also interested in this subject. I do have a multimedia car stereo with HDMI in and I would like to mirror the MI8 to it (to watch movies or the navigation app).
I did understand that it doesn't support MHL or whatever BUT I was wondering if there is any other options (Displaylink as example) that is compatible to use in car (so that is not needed to be powered or that can be powered thru usb and that doesn't need WiFi).
Any help/idea?
m.zambonelli said:
I am also interested in this subject. I do have a multimedia car stereo with HDMI in and I would like to mirror the MI8 to it (to watch movies or the navigation app).
I did understand that it doesn't support MHL or whatever BUT I was wondering if there is any other options (Displaylink as example) that is compatible to use in car (so that is not needed to be powered or that can be powered thru usb and that doesn't need WiFi).
Any help/idea?
Click to expand...
Click to collapse
Displaylink works over using USB
i have a displayplay laptop from sentio and that works.
samson_li said:
Displaylink works over using USB
i have a displayplay laptop from sentio and that works.
Click to expand...
Click to collapse
It works with mi8? what laptop model is?
i use apowermirror installed on both PC and Cellphone (make search over google, it's easy), connect PC to the phone through USB or WIFI and have phone display on PC and viceversa, can make plenty of settings and quality... this way then i have the PC connected on my main high quality TV and there we go, no latency high quality phone on TV and i use it for gaming for example connect bluetooth gamepad to the phone, launch high quality android games such as life is strange and played with high experience on TV, this as usefull when i was sick and ill at home and had no good pc and no consoles.... was a very good experience.... the only downside is that apowermirror can transmit in "FULL SCREEN" only with paid VIP pro version.
m.zambonelli
Chromecast, anycast, Miracast.... Chromecast is the best, but none is perfect
Scrcpy - useful tool when my display was broken (touch worked)
https://github.com/Genymobile/scrcpy

Categories

Resources