Related
Hello.
So I installed a custom recovery, flashed lollipop fw and installed supersu.
Today I was trying to install Viper4Android but, unfortunately, it does not work.
I also installed the drm restore patch (audio clear + is working).
Is there any fix ? Is Viper working for someone here?
Thanks in advance.
Interested too, have a z3c too and have found a few threads describing the installation in 2 steps, flashing via recovery and installing an .apk but nothing specific for z3c.
will update this thread once I have a full nandroid backup and am ready to play around.
I was in the same situation as you guys and couldn't live without V4A.
You/we forgot 1 step
You need to set SELinux mode to permissive and then install V4A driver:
Use this simple app:
https://play.google.com/store/apps/details?id=com.mrbimc.selinux
Amy more advice? Tried that, then set it back, yet viper doesn't seem to be getting used although the driver is installed, where do I select viper as the processor for audio?
ovizii said:
Amy more advice? Tried that, then set it back, yet viper doesn't seem to be getting used although the driver is installed, where do I select viper as the processor for audio?
Click to expand...
Click to collapse
You don't, I was also looking for that for a while, but PowerAmp picks that up automatically and so I guess the entire OS
Sent from my D5803 using XDA Free mobile app
Dsteppa said:
I was in the same situation as you guys and couldn't live without V4A.
You/we forgot 1 step
You need to set SELinux mode to permissive and then install V4A driver:
Use this simple app:
https://play.google.com/store/apps/details?id=com.mrbimc.selinux
Click to expand...
Click to collapse
any idea what happened that google play store link is no longer valid? shall I chose another one or restore from backup?
ovizii said:
any idea what happened that google play store link is no longer valid? shall I chose another one or restore from backup?
Click to expand...
Click to collapse
Nope, seems like they removed it from the store
I've had a backup with TItaniumBackup but I was just curious what happened there...
Did as Dsteppa sayed. Worked for 10 sec. closed music app and viper and start again. Same thing. Btw I have force enable V4A. Then i went to viper settings and changed FX compatible mode to compatible and restart phone. Works perfectly! Thanks so much!
The solution is disable or froze "Sound Enhancement" app, and that's all, V4A is going to work fine without need of change the option to "Compatible Mode".
iFlasher said:
The solution is disable or froze "Sound Enhancement" app, and that's all, V4A is going to work fine without need of change the option to "Compatible Mode".
Click to expand...
Click to collapse
Thank i try now
MrPingle
Also make sure that Equalizer (in settings, not Viper) is set to Off mode.
I try to install V4A (through Apk) but when i install the drivers, a message says: "Driver install failed: the busybox installation on you device does not work... etc."
I have just installed the last version of busybox in /system/xbin and set Selinux permissive.
How can i resolve it?
I get root with Kingroot e after change binaries to Supersu's binaries.
Hi guys, I could not run Viper4android application on my device (android 6) . I haved installed apk then install driver . But Not thing change in sound effect. I tried to search and did not find out any error?
I need some help to run app with effect sound when play music!
Thank inadvance!
Well mine has problem of installing the sound driver.
通过我的 XT1096 上的 Tapatalk发言
duongnv1996 said:
Hi guys, I could not run Viper4android application on my device (android 6) . I haved installed apk then install driver . But Not thing change in sound effect. I tried to search and did not find out any error?
I need some help to run app with effect sound when play music!
Thank inadvance!
Click to expand...
Click to collapse
How did you install the viper4android via apk or you flashed from recovery?
duongnv1996 said:
Hi guys, I could not run Viper4android application on my device (android 6) . I haved installed apk then install driver . But Not thing change in sound effect. I tried to search and did not find out any error?
I need some help to run app with effect sound when play music!
Thank inadvance!
Click to expand...
Click to collapse
In order to install ViPER4Android, you'll need your system to be properly rooted, BusyBox must be installed, and SELinux Mode must be "Permissive".
I recommend this BusyBox installer, and you can get SELinux Mode Changer from here.
Then, after everything is properly set up, you must also disable your ROM (e.g. CyanogenMod-based ROMs' AudioFX)and/or player (e.g. Poweramp's equalizer)'s built-in equalizer, and switch ViPER4Android's FX Compatible mode from "Normal" to "Compatible".
duongnv1996 said:
Hi guys, I could not run Viper4android application on my device (android 6) . I haved installed apk then install driver . But Not thing change in sound effect. I tried to search and did not find out any error?
I need some help to run app with effect sound when play music!
Thank inadvance!
Click to expand...
Click to collapse
I was able to make V4A work on my Moto X 2014 with a fix.
If you do not have Busybox or permissive SELinux, follow the instructions our mate's posted above:
KazuhiroYasei said:
In order to install ViPER4Android, you'll need your system to be properly rooted, BusyBox must be installed, and SELinux Mode must be "Permissive".
I recommend this BusyBox installer, and you can get SELinux Mode Changer from here.
Then, after everything is properly set up, you must also disable your ROM (e.g. CyanogenMod-based ROMs' AudioFX)and/or player (e.g. Poweramp's equalizer)'s built-in equalizer, and switch ViPER4Android's FX Compatible mode from "Normal" to "Compatible".
Click to expand...
Click to collapse
After Busybox installed and SELinux on permissive, you flash the Viper zip and install the driver. Right after that you open a root enabled file manager and find system>vendor>etc. You'll see an audio_effects.conf.
(I suggest making a safe copy of this file).
Rename the original audio_effects.conf to audio_effects.bak.
Save and reboot. Now try using v4a again.
brunoperissotti said:
I was able to make V4A work on my Moto X 2014 with a fix.
After Busybox installed and SELinux on permissive, you flash the Viper zip and install the driver. Right after that you open a root enabled file manager and find system>vendor>etc. You'll see an audio_effects.conf.
(I suggest making a safe copy of this file).
Rename the original audio_effects.conf to audio_effects.bak.
Save and reboot. Now try using v4a again.
Click to expand...
Click to collapse
Was this procedure required for V4A to work on your Victara? Mine worked in every ROM I tested (all Marshmallow-based) by following the steps you quoted.
KazuhiroYasei said:
Was this procedure required for V4A to work on your Victara? Mine worked in every ROM I tested (all Marshmallow-based) by following the steps you quoted.
Click to expand...
Click to collapse
Yes. I was only able to enjoy v4a after this procedure.
It's worth pointing out that V4A is going to F up your Moto Voice
Popping into this thread real quick to provide some info,
Using compatibility mode with V4A is bad news, causes extra battery drain and problems with some apps.
For every single rom and device I've used 5.0+ I've followed the same procedure to install V4A, without using compatibility mode, without having to delete a file every time, etc.
Flash the "lolliviper" zip attached to this OP.
Followed by the "Build.Prop-Tweaks" and "Soundfix-LibFiles" attached to this post.
You'll also need a way of setting selinux to permissive after every boot if you're using CM or something else with selinux set to enforced. Something like SELinuxModeChanger available here will work.
If you don't have busybox installed, V4A will tell you and help you install it.
The V4A version included in the "lolliviper" zip is not the newest , you'll need to "Check Update" via the 3 dot menu and install the latest apk.
After all this, install the driver via the V4A app, reboot, and you're golden.
Flipz77 said:
It's worth pointing out that V4A is going to F up your Moto Voice
Click to expand...
Click to collapse
Didn't know that. I was only able to set v4a on a custom ROM, so that ship was long gone hahaha
it just stops working?
brunoperissotti said:
Didn't know that. I was only able to set v4a on a custom ROM, so that ship was long gone hahaha
it just stops working?
Click to expand...
Click to collapse
Actually it still "works" because it detects your launch phrase, but after that, half of the time it just hangs without hearing your command. Sometimes it'll randomly work, but it was too much of a botch to keep it that way. I've now resorted to Noozxoide Pro: it's still a system-wide mod with modes for headset, speaker and BT, but it's installed as a "standard" app, it doesn't mess with your system and it sounds boss!
I ran across this link on a similar search on the google machine, and it made V4A installation a breeze. No manual messing with kernel settings and whatnot: http://forum.xda-developers.com/android/software/viperaudio-viperatmos-3-8-sq-driver-t3289075
Battery life has been fine running this for about a week. I don't use Moto Voice so can't comment on that.
THANKS
brunoperissotti said:
I was able to make V4A work on my Moto X 2014 with a fix.
If you do not have Busybox or permissive SELinux, follow the instructions our mate's posted above:
After Busybox installed and SELinux on permissive, you flash the Viper zip and install the driver. Right after that you open a root enabled file manager and find system>vendor>etc. You'll see an audio_effects.conf.
(I suggest making a safe copy of this file).
Rename the original audio_effects.conf to audio_effects.bak.
Save and reboot. Now try using v4a again.
Click to expand...
Click to collapse
Thanks a lot, I was already discouraged, tried several versions of viper, on diferent roms, this was the only solution, but is necessary to remember that for this file to appear in the folder, you need to open the application and save a profile, even if empty, without it you can not find the file audio_effects
If u root ur device using magisk, u can install viper magisk module...it works fine on android 6.0 with selinux enforcing..
Sent from a Motobot
Audio from the jack sucks on our max pro m1....
I found a mod for amazing audio quality....(Arise Deuteronomy-2.94)
(I'm not the dev...Just sharing)
Link to original thread---
https://forum.xda-developers.com/android/software/r-s-e-sound-systems-auditory-research-t3379709
Here's the link for Arise Deuteronomy-2.94-Aroma installer
https://androidfilehost.com/?fid=457095661767141554
Flash the file in twrp it will open aroma installer then
only select the follow options....
First goto jedi night option..
Core then modules
Skip viper and its profiles
Select:
Am3d
Arkamys
Musicfx
Smeejaytee tool box
Now tap next.....Skip everything except
Remove deep buffer
And install....
Note:
1. Disable AM3D via phone settings
2. DO NOT FLASH VIPER4X THAT COMES WITH THIS MODULE(Arise) in the installation menu/options....
3. Do not try to open/run AM3D app it will crash multiple times and reboot the device
4. Clean flash only
5. Works on stock v327 with magisk...not tested on other roms
If you want viper4x
Try this:
https://forum.xda-developers.com/android/software/sound-mod-viper4android-oreo-t3734107
Going to experiment this. Will provide feedback after using it . Thanks
pranavkpr said:
Audio from the jack sucks on our max pro m1....
I found a mod for amazing audio quality....(Arise Deuteronomy-2.94)
(I'm not the dev...Just sharing)
Link to original thread---
https://forum.xda-developers.com/android/software/r-s-e-sound-systems-auditory-research-t3379709
Here's the link for Arise Deuteronomy-2.94-Aroma installer
https://androidfilehost.com/?fid=457095661767141554
Flash the file in twrp it will open aroma installer then
only select the follow options....
Click to expand...
Click to collapse
have u tried in x00td??
It's universal ...
cresar_arato said:
have u tried in x00td??
Click to expand...
Click to collapse
Arise works on all devices....
Flash and enjoy
cresar_arato said:
have u tried in x00td??
Click to expand...
Click to collapse
Bro do not try this. My phone goes into bootloop after flashing this.
kannss said:
Bro do not try this. My phone goes into bootloop after flashing this.
Click to expand...
Click to collapse
Did you follow the procedure?
pranavkpr said:
Did you follow the procedure?
Click to expand...
Click to collapse
Maybe I am on android 9.0 that's why this happen
I would also advise against this mod. Although I have used ARISE in my previous phones, it crashes on ZMPM1. SElinux is set to permissive and all other audio mods were uninstalled. Still it crashed and rebooted to recovery everytime.
Since it overwrites many system files, it has also probably interfered with apps some of which become unresponsive. I will have to flash TWRP V327 again since it is almost impossible to isolate the issues.
Tianhe said:
I would also advise against this mod. Although I have used ARISE in my previous phones, it crashes on ZMPM1. SElinux is set to permissive and all other audio mods were uninstalled. Still it crashed and rebooted to recovery everytime.
Since it overwrites many system files, it has also probably interfered with apps some of which become unresponsive. I will have to flash TWRP V327 again since it is almost impossible to isolate the issues.
Click to expand...
Click to collapse
Any audio mods that doesn't change se policy?
V4a or ainur sauron?
akshmau5 said:
Any audio mods that doesn't change se policy?
V4a or ainur sauron?
Click to expand...
Click to collapse
V4A (Magisk Module) worked for me without touching the se policy or installing busy box. However, after trying out this mod and subsequently deleting it I find V4A asking for busy box installation and then driver installation error. I will try afresh after flashing v327 through TWRP again
Tianhe said:
V4A (Magisk Module) worked for me without touching the se policy or installing busy box. However, after trying out this mod and subsequently deleting it I find V4A asking for busy box installation and then driver installation error. I will try afresh after flashing v327 through TWRP again
Click to expand...
Click to collapse
Oh hard luck!
Thanks. Can't systemless busybox + init.d injector work? You can try perhaps for v4a to get working.
This audio mod and ainur sauron change the system partition hence i thought it would be better to ask someone who already got it working.
akshmau5 said:
Oh hard luck!
Thanks. Can't systemless busybox + init.d injector work? You can try perhaps for v4a to get working.
This audio mod and ainur sauron change the system partition hence i thought it would be better to ask someone who already got it working.
Click to expand...
Click to collapse
Tried it but something is breaking driver installation. I neither have the expertise nor the the patience to check cfg files in audio policy or elsewhere. Too many system overwrites. Flashing stock seems to be the way to go.
Another curious development which may or may not be related -
1) Safety Net check now fails.
2) Making a TWRP backup of the installed ROM fails at System Image.
Tianhe said:
Tried it but something is breaking driver installation. I neither have the expertise nor the the patience to check cfg files in audio policy or elsewhere. Too many system overwrites. Flashing stock seems to be the way to go.
Another curious development which may or may not be related -
1) Safety Net check now fails.
2) Making a TWRP backup of the installed ROM fails at System Image.
Click to expand...
Click to collapse
Uh oh. Better to stay away from this mod then.
I've been using viper4android xHiFi, it works perfectly and the audio quality is exactly the way I want it to be.
Possible fix
Tianhe said:
I would also advise against this mod. Although I have used ARISE in my previous phones, it crashes on ZMPM1. SElinux is set to permissive and all other audio mods were uninstalled. Still it crashed and rebooted to recovery everytime. .
Click to expand...
Click to collapse
You will have to disable/Freeze AM3D via phone settings...
Check op
Tianhe said:
I would also advise against this mod. Although I have used ARISE in my previous phones, it crashes on ZMPM1. SElinux is set to permissive and all other audio mods were uninstalled. Still it crashed and rebooted to recovery everytime.
Click to expand...
Click to collapse
Do not run the AM3D app...It will crash and reboot
..You need to disable AM3D via phone settings
pranavkpr said:
Do not run the AM3D app...It will crash and reboot
..You need to disable AM3D via phone settings
Click to expand...
Click to collapse
Doesn't work, other modules crash too
speaker was not working after installing this zip.
pranavkpr said:
Audio from the jack sucks on our max pro m1....
I found a mod for amazing audio quality....(Arise Deuteronomy-2.94)
(I'm not the dev...Just sharing)
Link to original thread---
https://forum.xda-developers.com/android/software/r-s-e-sound-systems-auditory-research-t3379709
Here's the link for Arise Deuteronomy-2.94-Aroma installer
https://androidfilehost.com/?fid=457095661767141554
Flash the file in twrp it will open aroma installer then
only select the follow options....
First goto jedi night option..
Core then modules
Skip viper and its profiles
Select:
Am3d
Arkamys
Musicfx
Smeejaytee tool box
Now tap next.....Skip everything except
Remove deep buffer
And install....
Note:
1. Disable AM3D via phone settings
2. DO NOT FLASH VIPER4X THAT COMES WITH THIS MODULE(Arise) in the installation menu/options....
3. Do not try to open/run AM3D app it will crash multiple times and reboot the device
4. Clean flash only
5. Works on stock v327 with magisk...not tested on other roms
If you want viper4x
Try this:
https://forum.xda-developers.com/android/software/sound-mod-viper4android-oreo-t3734107
Click to expand...
Click to collapse
I've done accordingly and i am bit confused here, as Disable AM3D via phone settings but that's the only app I have in the phone after disabling it i don't have any other way to control the music. how am i suppose to control the music?
refai said:
I've done accordingly and i am bit confused here, as Disable AM3D via phone settings but that's the only app I have in the phone after disabling it i don't have any other way to control the music. how am i suppose to control the music?
Click to expand...
Click to collapse
You dont need an app.... Because
Arise modifies the system files...its not an effect that applies on top of streaming music...
Also, Arise has different music profiles/presents....you can try them also(avaliable in the same aroma installation)
..Feel the difference..
I've tried installing the driver multiple times and can't seem to make it work at all. The only method I've not been able to accomplish is renaming audio_effects.conf to audio_effects.conf.bak as has been recommended for other phones. For some reason, this file will not rename.
it would seem the file is set to be unwritable (I'm not familiar with linux permissions like this, so maybe that can be fixed somehow?). At the very least, Solid Explorer isn't able to do the job, and can't change the rw perms either, as the operation just fails. (I have got selinuxmodechanger changed to permissive and after reboot, but no change here either)
Any other ideas?
Well, for anyone else wanting to know how to make this work, follow this guide here: https://thedroidarena.com/install-viper4android-android-10-q/
Don't use the magisk module for V4A, it doesn't work.
Works great for me now!
I'm using it it works perfect but you have to use the new version not the older one
Sent from my ASUS_I003DD using Tapatalk
Matakor said:
Well, for anyone else wanting to know how to make this work, follow this guide here: https://thedroidarena.com/install-viper4android-android-10-q/
Don't use the magisk module for V4A, it doesn't work.
Works great for me now!
Click to expand...
Click to collapse
I followed the instructions above, but it doesn't work.
Matakor said:
Well, for anyone else wanting to know how to make this work, follow this guide here: https://thedroidarena.com/install-viper4android-android-10-q/
Don't use the magisk module for V4A, it doesn't work.
Works great for me now!
Click to expand...
Click to collapse
Do you still have that apk lying around? XDA Labs does not appear to be working ATM.
bencozzy said:
JamesDSP works
Click to expand...
Click to collapse
I saw that, didn't really know what it did. I'll check it out.
Nothing in JamesDSP is doing anything for me on Speakers, Headphones, or Bluetooth. I think that this may beacause of my failed install of V4A rootless (might work if I had the APK?). Any ideas if this is the problem? If It is, do you know how I might uninstall V4A?
If rooted, try installing latest V4A directly from here (https://labs.xda-developers.com/store/app/com.pittvandewitt.viperfx) rather than via Magisk.
I prefer older V4A versions, having tried above.
My preferred V4A is 2.5.0.5 (found in App folder in following .zip from here: https://androidfilehost.com/?fid=673368273298920860)
1. Ensure on latest BusyBox.
2. Install latest V4A from Magisk & download driver, device will auto-restart.
3. Uninstall this latest V4A (don't delete data or cache).
4. Install V4A 2.5.0.5 .apk from above link. Don't open app yet.
5. From Magisk, install Audio Modification Library (choose relevant options). Restart device.
6. Additionally, Magisk install Audio Compatibility Patch. Restart device.
7. Ensure V4A settings FX compatible mode option = Normal.
(Don't optmise V4A in battery settings).
Noticeable improvement in speaker volume (I don't play over BT or headphones, so cannot comment).
elmor0 said:
If rooted, try installing latest V4A directly from here (https://labs.xda-developers.com/store/app/com.pittvandewitt.viperfx) rather than via Magisk.
I prefer older V4A versions, having tried above.
My preferred V4A is 2.5.0.5 (found in App folder in following .zip from here: https://androidfilehost.com/?fid=673368273298920860)
1. Install latest V4A from Magisk & download driver, device will auto-restart.
2. Uninstall this latest V4A (don't delete data or cache).
3. Install V4A 2.5.0.5 .apk from above link. Don't open app yet.
4. From Magisk, install Busybox & Audio Modification Library (choose relevant options). Restart device.
5. Additionally, Magisk install Audio Compatibility Patch. Restart device.
6. Ensure V4A settings FX compatible mode option = Normal.
Noticeable improvement in speaker volume (I don't play over BT or headphones, so cannot comment).
Click to expand...
Click to collapse
I uninstalled everythingg I had installed up to that point (everything I could at least), and followed the instructions step by step. Still getting abnormal in the V4A app (at least the app looks cooler now : P). I really don't know what is going on at this point. I might just reset the whole phone and follow your instructions again. I will report back when I get around to that.
Ok, I decided to play around a little before trying a reset; and I installed Viper 4 Android legacy with the APK from the zip you gave me, and it now says audio format supported! Yay! It just says "Processing: no" now. I have a feeling that I have something setup wrong. Any ideas?
Edit: Grammer
You managed to install driver v.2.5.0.5 or latest v4a?
Processing should change to "Yes" whilst audio is playing (music player/ YouTube/ system sounds etc).
Streaming music can be hit & miss; set up Audio Compatibility Patch correctly (via Magisk).
elmor0 said:
You managed to install driver v.2.5.0.5 or latest v4a?
Processing should change to "Yes" whilst audio is playing (music player/ YouTube/ system sounds etc).
Streaming music can be hit & miss; set up Audio Compatibility Patch correctly (via Magisk).
Click to expand...
Click to collapse
I installed driver version 2.5.0.4 with the APK you pointed me towards in the .zip/viperfx/app folder.
I will reinstall the audio conpatibily patch. What options should I choose in the patch?
Edit: I did not install the driver *with* the APK, but alongside it. I installed the driver via ViperFX Legacy in Magisk.
Try the ACP if V4A not working for streaming music apps.
I selected following:
- Skip audio_policy patching? = NO
- Skip notification_helper remover? = YES
- Skip usb policy patching for usb dacs? = NO
- Use lib workaround? = NO
Error-404-Go-Home said:
Edit: I did not install the driver *with* the APK, but alongside it. I installed the driver via ViperFX Legacy in Magisk.
Click to expand...
Click to collapse
That's fine, as long as V4A driver is enabled/ status normal/ format supported/ and it is processing during audio play.
elmor0 said:
That's fine, as long as V4A driver is enabled/ status normal/ format supported/ and it is processing during audio play.
Click to expand...
Click to collapse
It still isn't processing audio : (. I have tried resetting and following your instructions again. The only way I am able to get it to stop displaying "Status: Abnormal" is by installing Viper4Android FX Legacy in the new driver mode with the user app, then installing the Audio Modification and compatibility patch, then restarting and installing the APK you gave me. Even with all that, it will not recognize audio being played (it displays "Processing: No" when audio is very clearly playing and I have effects enabled). I am now considering switching to LineageOS (I would be there already if it wasn't for the fingerprint sensor driver being broken).
Edit: Do you think switching kernels would change anything?
Edit 2: I noticed a toast notification from V4A on startup saying "A running program has requested Android to disable audio effects, so V4A will be temporarily disabled."
I am thinking that maybe the stock Dirac audio processing might be interfering with V4A somehow. Is there anyway to get Viper to ignore requests to disable?
Well, Lineage didn't fix anything (No matter what I did, V4A would not stop displaying abnormal). Took me a little while to get back to stock, but the latest version of V4A is working, but only for the first 30 seconds after reboot before giving me the previously mentioned toast notification. I have removed all apps that are even remotely audio processing related, but still have this problem. Anybody else had something similar? If you did, how did you fix it?
(Also, special thanks to elmor0 for all of your help getting me this far I'm so close)
Edit: Holy shiz it's working! I used the method described in my previous post, but with the added step of uninstalling and reinstalling audio modification library after the last reboot. Again thank you all for your help! And I really hope this helps someone!
Error-404-Go-Home said:
Edit: Holy shiz it's working! I used the method described in my previous post, but with the added step of uninstalling and reinstalling audio modification library after the last reboot. Again thank you all for your help! And I really hope this helps someone!
Click to expand...
Click to collapse
hi
I'm having the same problem for months now
I hear it needs SE Linux to be permissive for V4A to work properly
I had no success on getting that SE Linux to turn Permissive unfortunately
long story short , I found myself here
can you please give me a step by step on how you got V4A to work , that is off course if its still working for you man
I'm at the end of my rope here , any guidance would appreciated ,
Thanx
JimmyMX said:
hi
I'm having the same problem for months now
I hear it needs SE Linux to be permissive for V4A to work properly
I had no success on getting that SE Linux to turn Permissive unfortunately
long story short , I found myself here
can you please give me a step by step on how you got V4A to work , that is off course if its still working for you man
I'm at the end of my rope here , any guidance would appreciated ,
Thanx
Click to expand...
Click to collapse
I ended up refllashing with Lineage and installing this: https://forum.xda-developers.com/t/app-fix-100-working-viper4android-for-android-11-devices.4213647/
That version has worked flawlessly for me for Android 10 and 11.
Good luck!
All features are working. If you follow the process as described, viper4android works fine on YouTube and all platforms. Moreover, it eliminates the problem of voice reduction when forwarding videos.
Tested PE PLUS (A10) and PE (A11) OFFİCİAL
Before you start installing the Sound Mode, install the SELINUX PERMİSSİVE file with MAGİSK and restart the device.
FOLLOW THE PROCEDURES IN THE ORDER
1. Install the Viper4Android FX zip file with Magisk and
Open the Viper4Android FX application and install the driver and restart.
2a. Install the Audio Modification Library file with Magisk.
2b. Install the Audio Compatibility Patch file with Magisk. ---> Options will be as below.
Volume UP - Volume UP - Volume DOWN - Volume DOWN - Volume DOWN
Restart the device.
3. Open the Viper4Android FX application and activate LEGACY MOD in settings.
DONE.
(FOR SETTİNG FILES)
VIPER4ANDROID_DDC-KERNEL-PRESET FOLDER
---> Copy to folder Android / data / com.pittvandewitt.viperfx / files.
MY SETTİNG FOR HEADPHONES and SPEAKER ---> Viper4Android_DDC-KERNEL-PRESETS File
FİLES :
https://www.dosyaupload.com/ou0i
https://www.dosyaupload.com/ou0k
https://www.dosyaupload.com/ou0l
https://www.dosyaupload.com/ou0m
https://www.dosyaupload.com/sH1O
Update ---> DDC-KERNEL-PRESETS
First of all i want to thank you for the clear and detailed guide...
i have few questions tho, is there any way to install without switching SELINUX to permissive?? my concern here are the security issues
also can i add ainur narsil along with V4a, or is it even worth it?! if yes then what the installation process would be??
thank you in advance!
Obito_Sama said:
First of all i want to thank you for the clear and detailed guide...
i have few questions tho, is there any way to install without switching SELINUX to permissive?? my concern here are the security issues
also can i add ainur narsil along with V4a, or is it even worth it?! if yes then what the installation process would be??
thank you in advance!
Click to expand...
Click to collapse
Unfortunately viper doesn't work properly without selinux permissive.
You can try different sound modes. however, problems occurred when I tried it on pe +. Also I don't think an extra sound mod will be needed after making good adjustments with the viper.
ryukseloglu said:
Unfortunately viper doesn't work properly without selinux permissive.
You can try different sound modes. however, problems occurred when I tried it on pe +. Also I don't think an extra sound mod will be needed after making good adjustments with the viper.
Click to expand...
Click to collapse
Somehow v4a works fine with selinux enforcing on my xz premium, less headache for me