Database Develop

Huawei Honor 4X Che2-UL00 lollipop root twrp gapps

There is one topic that provides all the answers for the European model. http://forum.xda-developers.com/android/help/huawei-honor-4x-che2-l11-qa-t3100429
There are so many version of Honor Mx4 so I was thinking have this thread specific for chinese version Che2-Ul00 with kirin CPU and 2Gb of Ram ( china Unicom ).
Remember to backup data before anything . Also charge phone and so on ( pray to gods, science etc... )
- rom Glory 4X Che2-UL00 2G - Update B425 can be found here: http://www.needrom.com/download/glory-4x-che2-ul00-2g/
- TWRP for Huawei 4C working nice with 4X https://drive.google.com/file/d/0B0iMDu5QRxNiVUpWRnRrN0tJQjg/view
- ADB download link
- to root phone get apk from here kingroot http://www.kingroot.net/
- superSU download from Here
Procedure:
Unlock bootloader for Honor 4X (Che2-UL00)
a) create an account here https://hwid1.vmall.com/
Provide following info
Mobile Model: Honor 4X Che2-UL00
MEID/IMEI:
S/N:
Product ID:
(to get your product id, enter *#*#1357946#*#*. An 8-digit ID is then displayed)
[ for me it was not instant, had to wait a little untill the product id was shown ]
The code should be given instant
b)Download the following files:
i) Adb fastboot tools + TWRP Recovery for Honor 4x + Honor 4x (che2-L11) original recovery:
Note: Get the file from post #10
ii) SuperSU by chainfire : UPDATE-SuperSU-v2.46.zip
iii) Connect honor 4x to your pc and install HiSuite
c)Preparing the phone
-Enable ‘Developer options’ (Settings > About phone > tap on ‘Build number’ until it’s enabled)
-Go to ‘Developer options’ and enable ‘USB debugging’
-Connect Honor 4x to PC (with HiSuite successfully connected)
-Extract zip file downloaded from b) i) to a folder (e.g. adbtools)
-Run cmd to get into command prompt from PC and change directory to adbtools
-On the Command Prompt window type ‘adb devices’, and it will list down device serial number, with a word device following behind.
-Type ‘adb reboot bootloader’ to kick the phone into Fastboot mode. You will see that your phone boot into a white screen with android robot with the words 'Phone Locked' (in blue)
-Type ‘fastboot oem unlock unlockingpassword’, where ‘unlockingpassword’ is the 16-digit number you’ve obtained earlier
-If successful, the phone’s screen will now show ‘PHONE Unlocked’ in red
-Reboot the phone to make sure everything runs ok.
Flashing custom recovery for Honor 4X (Che2-UL00)
To root your phone, you need to flash a custom recovery to it.
-Same as earlier step, run cmd to get into command prompt from PC and change directory to adbtools
-Type ‘adb devices’ to make sure that your phone is properly connected.
-Type ‘adb reboot bootloader’ to kick the phone into Fastboot mode.
-Type 'fastboot flash recovery TWRP.img'
-If successful, you’ll get a ‘finished’ confirmation with the time it took to complete the process.
-To confirm a successful flash, power down your phone. Then go Recovery mode (TWRP): Press volume up + power buttons
-In case you need to turn back to stock recovery, repeat the above steps, Type 'fastboot flash recovery recovery_offical.img' instead and reboot to your original stock recovery.
Rooting Honor 4X (Che2-UL00)
-Download Chainfire’s SuperSU ZIP file into the phone’s SD card
-Boot the device into Recovery mode
-Navigate into the ‘install zip from sdcard’ option,
-Find the downloaded SuperSU ZIP file, and flash it.
-Once done, reboot the Honor 4x and launch the SuperSU app, install the binaries, and reboot the phone again.
-Congratulations, your device is now rooted.
After TWRP is installed you can install gapps using TWRP install from zip. Take care you need lollipop version 64bit
Download from here
Hope all was working fine for you.

I cannot get it to boot into twrp, tried several custom imgs including the one you linked, even if i hold vol up and power as soon as i do fastboot reboot (I've read some devices overwrite back to stock recovery on first boot) any help?

Fixed it?

Install TWRP Recovery, Backup Full System, Android Rooting and Recovery Back to Stock

Install TWRP Recovery (V2, V3.0.0, V3.0.2), Backup (Backup) Full System, Android Rooting (5 & 6) and Recovery Back to Stock. - October 30, 2016.
(It works on both Android 5 and 6 L21 and L23 with models).
DO THIS AT YOUR OWN RISK!
IMPORTANT!
'Please I beg MAKE BACKUP WITH TWRP immediately after you have installed it for anything, prevention is better than having a nice and lovely BRICK.
If you are not sure to make this tutorial better not do it, no rush so quiet.
<< INSTALL RECOVERY TWRP (V2, V3.0.0, V3.0.2) >>
There are 2 methods to do so, through PC or through an App, which is very simple, here I explain how:
Method 1 by PC:
Instructions for both versions:
1. Download TWRP INSTALL RECOVERY (V2, V3.0.0, V3.0.2) P8 HUAWEI LITE.rar
2. Download adb-setup-1.4.3.rar
3. Unzip adb-setup-1.4.3.rar and run the program. (This is for adb drivers and pc can detect the terminal is installed.)
We will see a blue screen console Type "and" or "accept" in everything and close the window. If you ask them to restart the pc, do it and go.
4. Start your phone in Fastboot mode; Turn off the phone and press the "VOL" key and without releasing connect to the PC until Fastboot screen appears.
5. Unzip "INSTALL RECOVERY TWRP (V2, V3.0.0, V3.0.2) HUAWEI LITE.rar P8" and execute the file "INSTALL RECOVERY TWRP (V2, V3.0.0, V3.0.2) HUAWEI LITE.bat P8" and follow the steps.
Do not take more than 5 minutes is just a matter of going pressing ENTER that's it!
Files:
TWRP V2:
mega:///#!SZkzlQCb!iKBl1-6arjT6_9exrp9sc2aVzp7NnuKxECz6MVJ_Oms
TWRP V3.0.0:
mega:///#!CZ91RQSA!B_kl3YPn7H38nbyG-5bVk2yt6qGDSsu3A2cnGysj7u4
TWRP V3.0.2:
mega:///#!rFcX3TxC!89ePFv4x9iEvv22WCO-AUHjIDeFhKw4UUIuZ4d7p7LU
ADB:
mega:///#!eY1giTYD!cPs8mlBxgVP8DLHgWhCmf6Ay9hi56aTOEps55CVwiHU
Method 2 by app:
Instructions for both versions:
1.Search in the App playstore "Flashify" Download and Install.
2. Download the RecoveryTwrp (V2, V3.0.0, V3.0.2) .zip
3. Unzip RecoveryTwrp (V2, V3.0.0, V3.0.2) .zip.
4. Start the app flashify, grant Root permissions and continue.
5. Press "recovery image"> "choose a file", selecting the browser of your choice, search and selecting the Recovery who downloaded.
6. Press in "Yup," wait to finish the process.
7. You can close the App.
Archive:
TWRP V2:
mega:///#!PBN0DAyD!NzWAX8Kn0ZtHftJZmf1_bir4OoppThMVwjP9Q6XXK9s
TWRP V3.0.0:
mega:///#!LZtUnSDS!N2dFfxiK4ed5dplkt0o9lQAeAzLVgLVxgy0pXCYeOgw
TWRP V3.0.2:
mega:///#!bNNRCBBY!UdXY6yWcoryK47SgV0352_JNfFLE0oIReaXDtqwWJaI
ADB:
mega:///#!eY1giTYD!cPs8mlBxgVP8DLHgWhCmf6Ay9hi56aTOEps55CVwiHU
And that's it!
<< BACKUP >>
Instructions:
1. Turn off the computer, start in Recovery Mode by pressing the (Vol + & Power) keys simultaneously and hold until entering the Recovery.
2. Start first appear a text in English which says:
( "Keep system read-only"
TWRP can leave without modifying the system partition to make it easier for you to take official updates.
Installation zips or performing operations adb may modify the system partition).
Select "Swipe to Allow Modifications" so they can install Zips or Roms or other operations.
3. Select "Backup".
4. Check the boxes "Cache, Boot, Data, System".
5. Press "Select Stogare" choose "MicroSD Card".
6. Select "Swipe to Backup" and wait to finish the process, the time will depend on the size of the backup, please be patient.
And that's it!
<< Rooting ANDROID (5 & 6) >>
Instructions:
1. Download the files on the SD card charging.
2. Start the phone in TWRP Recovery. (Vol + & Power)
3. Select Install, look for the "BETA-SuperSU-v2.62-20151210170034.zip" file, and press "swipe to install", wait to finish the process.
4. Return to main menu "Install", find the "BETA-SuperSU-v2.66-20160103015024.zip" file, and press "swipe to install", wait to finish the process.
5. Reboot system. (The phone will restart 2 times do not worry).
And ready! That would be all!
If for some reason you brickea the phone, install (flash) this UPDATE-unSU.zip file, this will solve the problem.
Files:
1. BETA-SuperSU-v2.62:
mega:///#!nJ9FXAjD!Jgelz-zLHtcITrkaA2_FpyS6CoK4fcNaPT-GD2ICsxA
2. BETA-SuperSU-v2.66:
mega:///#!uNsxwIbB!AXQzZL67NTL_unnU4P3cE0p14Jc-tjATIYyvrYshTsQ
3. UPDATE-UNSU:
mega:///#!3ZMCBDpJ!Lj9Fc1YMIrz3pGLwO0EM72xF-58Vv46ZNE-esov2Rbg
<< INSTALL STOCK RECOVERY >>
There are 2 methods to do so, through PC or through an App, which is very simple, here I explain how:
Method 1 by PC:
1. Download HUAWEI P8Lite INSTALL STOCK RECOVERY - Method For PC.
2. Download adb-setup-1.4.3.rar
3. Unzip adb-setup-1.4.3.rar and run the program. (This is for adb drivers and pc can detect the terminal is installed.)
We will see a blue screen console Type "and" or "accept" in everything and close the window. If you ask them to restart the pc, do it and go.
4. Start your phone in Fastboot mode; Turn off the phone and press the "VOL" key and without releasing connect to the PC until Fastboot screen appears.
5. Unzip "INSTALL STOCK RECOVERY HUAWEI P8Lite - Method For PC" and execute the file "INSTALL STOCK RECOVERY HUAWEI P8Lite.bat" and follow the steps.
Do not take more than 5 minutes is just a matter of going pressing ENTER that's it!
Files:
STOCK RECOVERY:
mega:///#!6E90XIYL!pHYSFN_OJKFMSmDOOhu5yFVNmh4zhS1RribCuT-9QPI
ADB:
Method 2 by app:
1.Search in the App playstore "Flashify" Download and Install.
2. Download the Recovery Stock.
3. Start the app flashify, otogar Root permissions and continue.
4. Press "recovery image"> "choose a file", selecting the browser of your choice, searching and selecting the Recovery stock they downloaded.
5.Pulsar in "Yup," wait to finish the process.
6. You can close the App.
Archive:
STOCK RECOVERY:
//mega.nz/#!OFsAEQqD!8qr6LOM4ND6u5GB6DVqhYxEIB7OAoOSF5iOouAmM5x8
That is all!
<< EXTRA DRIVER'S>>
Here I leave some Drivers Extras to troubleshoot issues fastboot, adb, if the PC does not detect the Cell, the installation of each is very simple, just keep connected your cel to the PC, run programs, you must give "next" and then restart the PC if necessary.
Files:
//mega.nz/#F!SZM21JKa!gE1IWif0EJH6-UwrJWQBAg
Greetings from Coatzacoalcos, Veracruz, Mexico!

[Tutorial] Force Update EMUI 8 Oreo manually to the latest build on P8 Lite 2017

Update: You can flash B370 released on (July 12 2018) too, tested and successfully updated from B366 to B370, this update includes July 2018 security patches
Hey everyone, in this guide you can update to the latest build of EMUI 8 by using the Nocheck Recovery, I know that you can update it by using HuRUpdater, but this guide is for flashing from the Nocheck Recovery
ATTENTION: THIS GUIDE IS ONLY FOR DEVICES ALREADY RUNNING EMUI 8, DO NOT TRY THIS ON EMUI 5 OTHERWISE YOU WILL GET INTO ERROR MODE (!!!)
I'm not responsible for any bricks, this has been tested to work to update from B322 to B364, It should work for future builds too
In this tutorial I will show you how to update to the latest build of EMUI 8 by using TWRP and the nocheck recovery, with my guide I successfully updated from B322 to B364
Requirements:
> Nocheck recovery - Link: https://forum.xda-developers.com/p8...recovery-recoveryoreonocheck-install-t3777974
> TWRP (Use the one by Dil3mm4) - Link: https://forum.xda-developers.com/p8...lopment/unofficial-twrp-3-2-1-0-oreo-t3773970
> Minimal ADB and Fastboot - Link: https://forum.xda-developers.com/showthread.php?t=2317790
You need to have both the Bootloader and FRP Unlocked
Step 1: Go here: http://pro-teammt.ru/firmware-database/?firmware_model=pra-lx1c432&firmware_page=0 , Download the one that says FullOTA-MF (B365 for single sim devices and B370 for dual sim devices) and download update.zip, update_data_full_public.zip & update_full_PRA-L31-hw_eu.zip
make sure you don't download the one that says FullOTA-MF-PV since that one is for updating from EMUI 5
Step 2: After downloading, you should get an "update.zip", "update_data_full_public.zip" and "update_full_PRA-L31-hw_eu.zip" packages, copy the files to the EXTERNAL SD Card (Don't copy to the internal as it won't work)
Step 3: Download the NoCheck Recovery from the link and copy to the EXTERNAL SD Card
Step 4: Download TWRP from the link and copy into the same folder that you installed ADB
Step 5: Connect your phone from the PC and boot into fastboot mode (Power button + Volume Down)
Step 6: Now launch ADB (I recommend using Minimal ADB and Fastboot), and run this command to flash TWRP
fastboot flash recovery_ramdisk nameoftherecovery.img
( in this case the latest recovery name is recovery_1105.img )
Step 7: Reboot your device by holding the power button and let it power on
(Note: Make sure you remove Google accounts, Fingerprint and the Password unlock before updating to avoid any issues)
Step 8: Now, reboot into TWRP by holding the Power button + Volume Up
Step 9: In the TWRP Menu, go to Install > Select Storage > Micro SD Card > Install Image and find the NoCheck Recovery that you copied into the EXTERNAL SD Card, flash it to the recovery_ramdisk partition
Step 10: Now go back to the main TWRP Menu and go to Advanced > Terminal and type this
echo --update_package=/sdcard/update.zip > /cache/recovery/command
and then Enter
After that, type reboot recovery into the Terminal of TWRP
Step 11: Your phone will reboot to the NoCheck Recovery and install the update, and reboot automatically once the update is finished
Step 12: Congrats, you just successfully updated to the Latest EMUI 8 build​
(Note: If your build number is still the same as before updating, flash update_data_full_public.zip & update_full_PRA-L31-hw_eu.zip)
In this case you should do this
Step 13: After it booted, Reboot your phone again to fastboot mode by pressing Power button + Volume Down and launch ADB, and run this command to flash TWRP again
fastboot flash recovery_ramdisk nameoftherecovery.img
( in this case the latest recovery name is recovery_1105.img )
Step 14: Reboot your device by holding the power button and let it power on
(Note: Make sure you remove Google accounts, Fingerprint and the Password unlock before updating to avoid any issues)
Step 15: Now, reboot into TWRP by holding the Power button + Volume Up
Step 16: In the TWRP Menu, go to Install > Select Storage > Micro SD Card > Install Image and find the NoCheck Recovery that you copied into the EXTERNAL SD Card, flash it to the recovery_ramdisk partition
Step 17: Now go back to the main TWRP Menu and go to Advanced > Terminal and type this
echo --update_package=/sdcard/update_data_full_public.zip > /cache/recovery/command
and then Enter
After that, type reboot recovery into the Terminal of TWRP
Step 18: Your phone will reboot to the NoCheck Recovery and install the update, and reboot automatically once the update is finished
Step 19: After it booted, Reboot your phone again to fastboot mode by pressing Power button + Volume Down and launch ADB, and run this command to flash TWRP again
fastboot flash recovery_ramdisk nameoftherecovery.img
( in this case the latest recovery name is recovery_1105.img )
Step 20: Reboot your device by holding the power button and let it power on
(Note: Make sure you remove Google accounts, Fingerprint and the Password unlock before updating to avoid any issues)
Step 21: Now, reboot into TWRP by holding the Power button + Volume Up
Step 22: In the TWRP Menu, go to Install > Select Storage > Micro SD Card > Install Image and find the NoCheck Recovery that you copied into the EXTERNAL SD Card, flash it to the recovery_ramdisk partition
Step 23: Now go back to the main TWRP Menu and go to Advanced > Terminal and type this
echo --update_package=/sdcard/update_full_PRA-L31_hw_eu.zip > /cache/recovery/command
and then Enter
After that, type reboot recovery into the Terminal of TWRP
Step 24: Your phone will reboot to the NoCheck Recovery and install the update, and reboot automatically once the update is finished
Step 25: Now you should get the full installation of EMUI 8

joaoj1999 said:
Hey everyone, in this guide you can update to the latest build of EMUI 8
ATTENTION: THIS GUIDE IS ONLY FOR DEVICES ALREADY RUNNING EMUI 8, DO NOT TRY THIS ON EMUI 5 OTHERWISE YOU WILL GET INTO ERROR MODE (!!!)
In this tutorial I will show you how to update to the latest build of EMUI 8 by using TWRP and the nocheck recovery, with my guide I successfully updated from B322 to B364
Requirements:
> Nocheck recovery - Link: https://forum.xda-developers.com/p8...recovery-recoveryoreonocheck-install-t3777974
> TWRP (Use the one by Dil3mm4) - Link: https://forum.xda-developers.com/p8...lopment/unofficial-twrp-3-2-1-0-oreo-t3773970
> Minimal ADB and Fastboot - Link: https://forum.xda-developers.com/showthread.php?t=2317790
You need to have both the Bootloader and FRP Unlocked
Step 1: Go here: http://pro-teammt.ru/firmware-database/?firmware_model=pra-lx1c432&firmware_page=0 , Download the one that says FullOTA-MF (B363 for single sim devices and B364 for dual sim devices), make sure you don't download the one that says FullOTA-MF-PV since that one is for updating from EMUI 5
Step 2: After downloading, you should get an "update.zip" package, copy the file to the EXTERNAL SD Card (Don't copy to the internal as it won't work)
Step 3: Download the NoCheck Recovery from the link and copy to the EXTERNAL SD Card
Step 4: Download TWRP from the link and copy into the same folder that you installed ADB
Step 5: Connect your phone from the PC and boot into fastboot mode (Power button + Volume Down)
Step 6: Now launch ADB (I recommend using Minimal ADB and Fastboot), and run this command to flash TWRP
fastboot flash recovery_ramdisk nameoftherecovery.img
( in this case the latest recovery name is recovery_1105.img )
Step 7: Reboot your device by holding the power button and let it power on
(Note: Make sure you remove Google accounts, Fingerprint and the Password unlock before updating to avoid any issues)
Step 8: Now, reboot into TWRP by holding the Power button + Volume Up
Step 9: In the TWRP Menu, go to Install > Select Storage > Micro SD Card > Install Image and find the NoCheck Recovery that you copied into the EXTERNAL SD Card, flash it to the recovery_ramdisk partition
Step 10: Now go back to the main TWRP Menu and go to Advanced > Terminal and type this
echo --update_package=/sdcard/update.zip > /cache/recovery/command
and then Enter
After that, type reboot recovery into the Terminal of TWRP
Step 11: Your phone will reboot to the NoCheck Recovery and install the update, and reboot automatically once the update is finished
Step 12: Congrats, you just successfully updated to the Latest EMUI 8 build​
Click to expand...
Click to collapse
when i go to system update it still showing b322 not b364

player98343 said:
when i go to system update it still showing b322 not b364
Click to expand...
Click to collapse
I forgot, you need to also flash update_data_full_public.zip and update_full_PRA-L31_hw_eu.zip (update_full_PRA-L11_hw_eu.zip if you are on a single SIM device)
To do this, you need to repeat the same steps starting from Step 6, the only difference is that the terminal commands are different
in this case, Step 10 will be like this
echo --update_package=/sdcard/update_data_full_public.zip > /cache/recovery/command
echo --update_package=/sdcard/update_full_PRA-L31-hw_eu.zip > /cache/recovery/command
Obviously, to flash these you need to reflash TWRP and then Nocheck Recovery to execute the terminal commands from TWRP
EDIT: I updated the tutorial, try it now

joaoj1999 said:
I forgot, you need to also flash update_data_public.zip and update_full_pra-l31_hw_eu.zip (update_full_pra-l11_hw_eu.zip if you are on a single SIM device)
To do this, you need to repeat the same steps starting from Step 6, the only difference is that the terminal commands are different
in this case, Step 10 will be like this
echo --update_package=/sdcard/update_data_public.zip > /cache/recovery/command
echo --update_package=/sdcard/update_full_pra-l31-hw_eu.zip > /cache/recovery/command
Obviously, to flash these you need to reflash TWRP and then Nocheck Recovery to execute the terminal commands from TWRP
EDIT: I updated the tutorial, try it now
Click to expand...
Click to collapse
hurupdater also works no neeed for terminal commands

player98343 said:
hurupdater also works no neeed for terminal commands
Click to expand...
Click to collapse
Is it reliable?, and does it relock Bootloader or FRP after the update?
I don't wanna risk bricking my device

joaoj1999 said:
Is it reliable?, and does it relock Bootloader or FRP after the update?
I don't wanna risk bricking my device
Click to expand...
Click to collapse
no it wont lock bootloader and frp
edit: remember to factory reset after flashing

player98343 said:
no it wont lock bootloader and frp
edit: remember to factory reset after flashing
Click to expand...
Click to collapse
Thanks, but why do I need to do an factory reset?
Also, there's B366 now released today on Firmware Finder, I'm currently installing the update
EDIT: I flashed all 3 zips of B366 from Nocheck Recovery and it worked just fine, I didn't do an factory reset

joaoj1999 said:
Thanks, but why do I need to do an factory reset?
Also, there's B366 now released today on Firmware Finder, I'm currently installing the update
EDIT: I flashed all 3 zips of B366 from Nocheck Recovery and it worked just fine, I didn't do an factory reset
Click to expand...
Click to collapse
cause it wont boot if you wont factory reset.
Edit:whats new on b366?

player98343 said:
cause it wont boot if you wont factory reset.
Edit:whats new on b366?
Click to expand...
Click to collapse
I successfully updated from B364 to B366 by flashing the zip files one by one via Nocheck Recovery without any issues, no need to do an factory reset
And this is what the changelog of B366
This update improves system security with Google security patches.
[Call]
Optimizes VoLTE feature for a better calling experience.
[Security]
Integrates Google security patches released in Jun 2018 for improved system security

joaoj1999 said:
I successfully updated from B364 to B366 by flashing the zip files one by one via Nocheck Recovery without any issues, no need to do an factory reset
And this is what the changelog of B366
This update improves system security with Google security patches.
[Call]
Optimizes VoLTE feature for a better calling experience.
[Security]
Integrates Google security patches released in Jun 2018 for improved system security
Click to expand...
Click to collapse
did the echo command relocked the bootloader?

player98343 said:
did the echo command relocked the bootloader?
Click to expand...
Click to collapse
Nope, bootloader always remained unlocked for me after executing the commands

joaoj1999 said:
Nope, bootloader always remained unlocked
Click to expand...
Click to collapse
i guess the only way is to use hisuite lol

joaoj1999 said:
Nope, bootloader always remained unlocked for me after executing the commands
Click to expand...
Click to collapse
Hi Joaoj1999,
Do you have the fingerprint sensor option available on your B370 firmware? i have the B372 Stock Rom (dual sim version) but no fingerprint option...
thanks
jose

lanzinha said:
Hi Joaoj1999,
Do you have the fingerprint sensor option available on your B370 firmware? i have the B372 Stock Rom (dual sim version) but no fingerprint option...
thanks
jose
Click to expand...
Click to collapse
Did you deleted the fingerprint before manually updating like I said on my tutorial?, also I'm on B370 right now and I have the fingerprint option working

joaoj1999 said:
Did you deleted the fingerprint before manually updating like I said on my tutorial?, also I'm on B370 right now and I have the fingerprint option working
Click to expand...
Click to collapse
HI joao,
I think not, but i never used the fingerprint before, so i think the dual sim oeminfo.img i used must be from an USA phone, can you send me a copy of your oeminfo.img (dual sim version)?
thanks for the help))
jose

How To Guide [GUIDE] Install TWRP (unofficial) for Mi 11/Pro/Ultra

This guide is written by Hoangsang and you can find it here https://xiaomi.eu/community/threads/guide-install-twrp-for-mi-11-pro-ultra.61239/
Before starting the process, the bootloader must be unlocked and Install Xiaomi USB drivers
New update:
Instructions to install Xiaomi.EU rom for Mi11/Pro/Ultra via TWRP
1. Download minimal_adb_fastboot_v1.4.3_setup and install. Note to install it straight into the C drive. At this time, there will be a Minimal ADB and Fastboot folder in the C drive
Download link: https://drive.google.com/file/d/1qMeXu_DLkF1WlvRo__qy8ZNmm2WAmR3v/view?usp=drivesdk
Or shortened link: https://bit.ly/3oIeg1p
2. Download the TWRP file for Mi11/Pro/Ultra.
TWRP for MI11 venus
TWRP for MI11Pro/Ultra mars/star
(Or check here: https://androidfilehost.com/?w=files&flid=318170 )
3. Rename the downloaded file to twrp.img, copy the TWRP file to the Minimal ADB and Fastboot folder in drive C.
4. Download the Xiaomi.EU rom for your phone ( https://xiaomirom.com/en/rom/mi-11-pro-ultra-11-ultra-star-europe-fastboot-recovery-rom/ ) After downloading, copy the rom to the phone (should be in the root directory for easy finding later).
5. Put the phone into Fastboot mode (Power key + volume down key).
Run the file: "C:\Minimal ADB and Fastboot\cmd-here.exe"
Type the command: fastboot boot twrp.img
Tip => Use the TAB key to complete filenames in command prompt windows
Wait for the installation, the phone will automatically run into TWRP
6. On TWRP, Change the language of TWRP to English, by clicking the right button on TWRP and select English.. then OK.
7. Enter the device (phone) password and press Enter for TWRP to have access to the file.
(Note: You definitely need to format data once you change ROMs - i.e. when changing ROM versions like going from stable to weekly, from official to Xiaomi.EU.... For updating within the same ROM you don't need to do that.... Do the formatting right at this step )
Run the following command after formatting to copy the rom.
Code:
adb push rom.zip /sdcard
Note: Rom is copied to Minimal ADB and Fastboot folder in the C
8. Install TWRP recovery to phone by: Select "Advanced" and select "Onekey inject TWRP". (wait for the device to install). Next time you want to enter TWRP, just press the power key + volume up (volume up). [Option]
9. Install the rom by on TWRP, select Install -> find the rom file mentioned in section 4.
10. After the installation is complete, wait for the device to restart (it takes about 5 minutes).
Update: TWRP currently does not support the "update-package" command. So after updating you still have to manually select the downloaded zip file to install. So having TWRP saves the need for a computer, but it's not available for OTA yet
(The device will not lose data if you are using XiaomiEU rom with the same version (stable -> stable, dev->dev))

Why aren't you first install ROM from internal and then format data ... Then you have installed the (custom) ROM without pushing or other things and can find it easily. After flashing you still can format right?

newer version support A12: https://mega.nz/folder/TgZwBByA#HFjBkXeJhCfuuyGnpAeVEw
Source: https://tradingshenzhen.com

New TWRP 3.7.0 released
TWRP 3.7.0 Released
TWRP 3.7.0 is out now for most currently supported devices.
twrp.me
For Xiaomi Mi 11 Utra there is this new version: https://eu.dl.twrp.me/star/
Does anyone have experience in this? Can I use this for xioami.eu 13.0.13?

The official TWRP recovery 3.7.0 for mi 11 pro/ultra is for Android 11

[GUIDE] Installing Lineage 18.1 (& more) [X00H] [X00I]

In this guide, i'm going to be a bit straightforward on how to install LOS 18.1 on your X00H/X00I device.
For the process, you need:
Your X00H/X00I device;
The following must be unlocked (if you didn't, you can follow the howto over my post);
A rooted phone/tablet with Magisk (any ADB & Fastboot tool is fine, but i suggest using this for simplicity);
In case you have none of the above, even a PC or Laptop with ADB and Fastboot binaries installed will suffice;
If you're on Windows, you can get the installer over GitHub;
If you're on Linux, hop into your package manager and install them via terminal (the following example will be for Debian/Deb-based/Ubuntu/Ubuntu-based distros. If you're on Arch, Fedora, etc.: just search for "fastboot" by using the respective pkg manager's search flag, then install it basing from the name it's repo gives):
Code:
sudo apt install fastboot
An USB cable (should come into the device's box, also must be capable of data transfering);
If you're going to do the process via a rooted device, the Asus device should come in it's packaging with an OTG adapter (be sure to attach the following to the rooted device);
PBRP (Pitch Black Recovery Project) for the device- OG post can be checked here;
Latest version for X00H;
Latest version for X00I;
If your device is an X00I, you can alternatively get TWRP instead;
The Android 9 Beta update (you MUST have the device updated to that version, else you'll risk the device to be bricked- for more info, check the OG post by Seba);
If you want to flash it via stock recovery, you can get the file over ASUS' site on the device;
Download for the X00H;
Download for the X00I;
If you have already flashed a custom recovery on your device, you can get the "custom recovery flashable zip"over SebaUbuntu's site;
.zip file for the X00H;
.zip file for the X00I;
Tiny discalimer on the flashable .zip above: once installed, your device's recovery will be replaced to stock (in other words, you'll lose the custom recovery);
The Lineage OS 18.1 rom and recovery (credits to @miya0405 for finding the site);
ROM and LOS Recovery for the X00H;
ROM and LOS Recovery for the X00I;
If you have all of the things required in the list, let's go!
--------------------------------------------------------------
Installing the Android 9 Beta​Stock Recovery method:​
Download the Android 9 Beta over ASUS' site (any device is fine, even using the phone itself);
Put an SDCard inside the device;
Move the .zip file inside the SDCard;
Turn off the device;
Boot into recovery (do Power + Vol.up combo- if your device's unlocked, tap on the volume button and select "Recovery" by pressing on the power button to confirm);
Select "Update from sd card";
Select the .zip file you've downloaded;
Wait for the update to install;
After updated, go back and select "Power off";
Custom Recovery Method:​
Download the Android 9 Beta flashable .zip over SebaUbuntu's site;
Put an SDCard inside the device;
Move the .zip file inside the SDCard;
Turn off the device;
Boot into recovery;
Select "Install";
Select the "External Memory" storage;
Search for the .zip file inside the SDCard;
Tap on it and install it, unchecking everything;
Swipe to continue and let the .zip file install;
The recovery will print you text on the progress (also gives advice on what to do after install);
Reboot to system;
Power off the device;
----------------------------------------------------------------
Unlocking the device:​Just a tiny reminder if you haven't yet, check my guide about it: then, resume from this point and proceed;
----------------------------------------------------------------
!!A word of advice!!​Don't install PBRP recovery just yet!
If you'll pick PBRP instead of the LOS recovery as the custom recovery of choice, flashing LOS 18.4 with it should make Lineage 100% unbootable and stuck in a bootloop!
Don't reboot back to PBRP if bootloops happen:
neither don't fix the "Cache" partiton with it, else it'll cripple more Lineage and redirect the boot to recovery or fastboot/bootloader!
TL;DR: Don't do my same mistake and flash the recovery partition with the wrong recovery (on the bright side, the device will still be salvageable).
----------------------------------------------------------------
Flashing Lineage Recovery:​Before proceeding, do the following firsthand:
Be sure to have the ADB & Fastboot binaries installed;
Your device rebooted to fastboot/bootloader mode (any method is acceptable);
Must have downloaded the recovery for your specific model (links are on the "required" list);
The device must be connected to the host machine (if you're using a rooted phone, be sure to have the OTG adapter connected to it first);
Rooted Android Device Method:​
Open the "ADB & Fastboot"tools of your choice;
Whether it is a terminal or the app i've suggested earlier: this portion will purely give instructions if you have the app;
If you're going to do the process via terminal, then jump to the "Linux Method" instead;
If it is the first time you open the tool, it should ask for root perms.- allow them;
Tap on the top right corner of the UI;
Tap on "Fastboot";
Tap on "Refresh";
Go to the "Partition" title, next to it you should see a dropdown menu;
Select "recovery";
Tap on the "Flash" button;
A file manager should open: search where the lineage recovery is (typically you can find it in the "Download" folder. The file should be called "recovery.img");
After selected, the app will automatically flash the recovery for you;
Disconnect the device;
Navigate over your Asus device with the volume buttons;
Select "Reboot recovery" and confirm with the power button;
Hooray, you have LOS Recovery installed;
Linux Method:​
Open the terminal (use the shortcut CTRL+ALT+T to open it, preferrably);
Do the following:
Code:
lsusb
# This checks if your asus device is connected proper to the machine
# If it is, lsusb should output something around a "Google" or "Qualcomm" device on the ID Bus
cd Downloads
# If you have put a different language locale, cd into the Downloads folder with it's localized name
ls
# List for the files inside the folder. You should see a file called 'recovery.img' inside
fastboot devices
# Tell fastboot to check if any device on bootloader/fastboot mode is connected
fastboot flash recovery recovery.img
# Gives fastboot the instruction to flash the .img file to the desired device's partition, which is the recovery in this case
After done flashing, disconnect the device;
Navigate over your Asus device with the volume buttons;
Select "Reboot recovery" and confirm with the power button;
Hooray, you have LOS Recovery installed;
Windows Method:​GUI Method:​
Simply use the "Latest ADB Launcher"executable located on the desktop of your PC;
Just make sure to flash the recovery partition with the "recovery.img" file;
Terminal Method:​
Navigate with the File Explorer;
Go to your Downloads folder and find for a file called "recovery.img";
Cut and paste it to where the ADB and Fastboot tools are installed at;
Click on your mouse's right button;
Select "Open terminal here" over the contextual menu;
A terminal should pop-up (Command Prompt, that is);
Type in the following:
Code:
fastboot devices
fastboot flash recovery recovery.img
Wait for the recovery to flash on the device;
After done so, disconnect the device;
Navigate over your Asus device with the volume buttons;
Select "Reboot recovery" and confirm with the power button;
Hooray, you have LOS Recovery installed;
------------------------------------------------------------
Installing Lineage OS 18.1:​Before proceeding, do the following firsthand:
Your device must be turned off;
Must have deleted the Android 9 Beta .zip file from the SDCard, for avoiding accidents;
Download the Lineage file off of the "required" list's links for your specific model;
Put the downloaded .zip file on an SDCard;
Insert the SDCard inside the device's slot;
Boot up into recovery mode;
Select with the volume keys "Apply Update" > "Apply from sdcard" and confirm with the power button;
Select the LineageOS .zip file;
Confirm with the power button;
Let the rom install by the recovery;
After install, navigate to the back button with the volume keys;
Select "Factory reset" > "Format cache partition";
The recovery will ask you the following:
Code:
Format Cache?
THIS CAN'T BE UNDONE!
Select "Yes";
Go back;
Select "Reboot system now";
First bootup will take some while, but you'll be greeted by the setup screen in no time.
Congratz, now your device has Lineage OS installed!
-------------------------------------------------------------------
Extras/FAQ Section:​Q: Is it possible to get root priviledges on the device?​A: Sure! There are different ways to apply root on the ROM, but feel free to pick whichever method you like:​
Rooting your device by picking it's 'boot.img' (exactly located on the folder of the respective model) over SebaUbuntu's Lineage site and patch it with an already-rooted device that has the Magisk companion app installed (requires no recovery patching, but it is required to boot the asus device in fastboot mode and patch the boot partition);​
Downloading the Magisk companion app over it's GitHub page, rename the .apk file by replacing '.apk' to '.zip' via file manager, patch PBRP over the recovery partition (with one of the methods listed over 2 titles above this one), and install the 'magisk.zip' file like you could usually do on any other device with custom recovery;​
If you use an X00I device, you can preferrably install TWRP from here instead of PBRP;​
After applied root on the device, patch back on the device the Lineage recovery- just for avoiding any inconvenience if you want to factory reset the device;​
Q: My device has Lineage installed, but the bottom buttons don't work. Is there a way to enable a virtual navbar?​A: Yep, but it's a bit of a tricky process. You must have either apps like Terminal Emulator or Termux installed for making this work- as an extra, you could get other keyboards like BeHe Keyboard or Hacker's Keyboard: but that is only if you've picked Terminal Emulator as your choice.​For direct instructions, follow this (you must be inside the terminal app of your choice and already gave storage perms to it firsthand):​
Code:
su
mount -o rw,remount /
vi /system/build.prop
# After come this far, go to the bottom of the build.prop file by scrolling with the touch screen
# On your keyboard, press the I key. This should make vi enter into INSERT mode
# When done so, add the following line on the build.prop file
qemu.hw.mainkeys=0
# For getting out of INSERT mode, find on your keyboard or terminal UI the ESC button
# For quitting and saving the file on vi, type the following
:wq!
# This should make vi quit and save the modifications to the build.prop file
# For rebooting the device straight from the terminal, just type in
reboot
# The device should immediately reboot, and upon unlocking: the virtual navbar should appear
Q: Can it be possible installing MicroG on the device?​A: You can! Every method for installing MicroG perfectly works on this ROM;​
Q: I have MicroG installed on my device, but i want to apply signature spoofing for extra functionality. Is this possible?​A: Sadly, due to the tinkering i've done on my side: the ROM gets a meltdown when modifying the 'services.jar' file is involved (root or non-root). If you follow some guides online (despite being few), the ROM, regardless of what you do or which method you follow: ​it will end up in a bootloop (or, to be more specific, the SystemUI starts to become picky);​
------------------------------------------------------------------
Credits:
miya0405 (for the lineage site)
SebaUbuntu (for the LOS rom, recovery, and PBRP recovery)
Erwin Abs (PBRP Recovery)
aaaaaaziskurnia (TWRP recovery for the X00I)
You, for dedicating your time on reading this long guide!