Database Develop

[rom][z00a]xenon hd[unofficial][nougat 7.1.2]

http://www.xenonhd.com/
XenonHD is a custom firmware aka ROM for various Android devices. It is based on CyanogenMod 14.1/AOSP with additional features, performance and battery life improvements.
The idea behind XenonHD is to give users a ROM that is "blazing fast, rock stable and buttery smooth".
Kernel Source:
https://github.com/gena33/android_kernel_asus_moorefield
Source Link: https://github.com/TeamHorizon
ROM Derived From: Lineage OS
ROM Firmware Requirements: Unlocked BL, Recovery
Flashing Instructions:
CLEAN FLASH :
Download the latest build and GApps
Reboot to recovery
Make NAndroid backup (Not Necessary)
Wipe System, Data, Cache , Dalvik
Flash the latest build and GApps
Reboot
Download Links:
ROM: Nougat
https://drive.google.com/file/d/1f9GclDdgWl38MTEQhJePz-FIojF9ktgU/view?usp=drivesdk
Gapps: opengapps.org
XDA:DevDB Information
Xenon HD 7.1 ROM Z00A, ROM for the Asus ZenFone 2
Contributors
gena33, Garry2199
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.x
ROM Firmware Required: Must be on Latest Firmware
Based On: Lineage OS
Version Information
Status: Alpha
Created 2018-01-27
Last Updated 2018-01-27

Sorry for bad thread but XenonHD devs didn't give me template
ROM testers says it is quite stable

gena33 said:
Sorry for bad thread but XenonHD devs didn't give me template
ROM testers says it is quite stable
Click to expand...
Click to collapse
Well, we give a thread template only to Official maintainers. Anyway, dude, clean your thread.. "TeamHorizon's XenonHD rom builds for HTC One (m8)", at least fix this up

joe2k01 said:
Well, we give a thread template only to Official maintainers. Anyway, dude, clean your thread.. "TeamHorizon's XenonHD rom builds for HTC One (m8)", at least fix this up
Click to expand...
Click to collapse
Ok

Where is that testers who told that it is stable? I saw only two messages (one of them is mine) about battery drain issue.

drumsalve said:
Where is that testers who told that it is stable? I saw only two messages (one of them is mine) about battery drain issue.
Click to expand...
Click to collapse
on Telegram group

Bootloop when install xposed

drumsalve said:
Where is that testers who told that it is stable? I saw only two messages (one of them is mine) about battery drain issue.
Click to expand...
Click to collapse
On telegram test group everyone use Xenon
t.me/z00atest

Is this dead?
Sent from my ASUS_Z00AD using Tapatalk

kenbo111 said:
Is this dead?
Click to expand...
Click to collapse
Nop

Work in ze551ml (Z00AD) ?

shadauer said:
Work in ze551ml (Z00AD) ?
Click to expand...
Click to collapse
Z00a and z00ad are the same
Sent from my ASUS_Z00AD using Tapatalk

kenbo111 said:
Z00a and z00ad are the same
Sent from my ASUS_Z00AD using Tapatalk
Click to expand...
Click to collapse
But ... I'm afraid to install, I need the 7.x nougat urgently, so afraid to brick the device by putting this rom ... ze551ml

shadauer said:
But ... I'm afraid to install, I need the 7.x nougat urgently, so afraid to brick the device by putting this rom ... ze551ml
Click to expand...
Click to collapse
Use NutOS
Sent from my ASUS_Z00AD using Tapatalk

Uow, i had experience, working ! xD thanks for help, now i can use my apps

ROM updated!
https://www.androidfilehost.com/?fid=962339331459002446

How to root please? Just flashed, quite fast and strong.

lineage-15.0-20180624_093715-UNOFFICIAL-Z008
I can not test lineage-15.0-20180624_093715-UNOFFICIAL-Z008 due to incomplete bootlop system build.prop file does not exist
XenonHD is a custom firmware aka ROM for various Android devices. It is based on CyanogenMod 14.1/AOSP with additional features, performance and battery life improvements.
The idea behind XenonHD is to give users a ROM that is "blazing fast, rock stable and buttery smooth".
Kernel Source:
https://github.com/gena33/android_kernel_asus_moorefield
Source Link: https://github.com/TeamHorizon
ROM Derived From: Lineage OS
ROM Firmware Requirements: Unlocked BL, Recovery
Flashing Instructions:
CLEAN FLASH :
Download the latest build and GApps
Reboot to recovery
Make NAndroid backup (Not Necessary)
Wipe System, Data, Cache , Dalvik
Flash the latest build and GApps
Reboot
Download Links:
ROM: Nougat
https://drive.google.com/file/d/1f9GclDdgWl38MTEQhJePz-FIojF9ktgU/view?usp=drivesdk
Gapps: opengapps.org
XDA:DevDB Information
Xenon HD 7.1 ROM Z00A, ROM for the Asus ZenFone 2
Contributors
gena33, Garry2199
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.x
ROM Firmware Required: Must be on Latest Firmware
Based On: Lineage OS
Version Information
Status: Alpha
Created 2018-01-27
Last Updated 2018-01-27[/QUOTE]
---------- Post added at 07:54 AM ---------- Previous post was at 07:50 AM ----------
GiaSen
I can not test lineage-15.0-20180624_093715-UNOFFICIAL-Z008 due to incomplete bootlop system build.prop file does not exist cant you help me thanks

Ta muito top a xenon hd
Continue nesse trabalho a rom tem tudo para ser perfeita. Thanks.

clgt said:
How to root please? Just flashed, quite fast and strong.
Click to expand...
Click to collapse
use Magisk. find it on Groovy ROM thread.

[PIE][AOSP-ROM] ArrowOS for Redmi 4x [UNOFFICIAL][9.0][TREBLE][23/09/2018]

ABOUT
ArrowOS is an AOSP inspired open source project started with the aim of keeping things simple, clean and neat. We added just the right and mostly used stuff that will be actually USEFUL at the end of the day.
WHAT WORKS?
Audio
Camera
RIL
Bluetooth
WiFi
Tethering [Hotspot]
Hardware Keys
Data
GPS
Sensors
Camcorder
VoLTE (Not Tested Yet)
WHAT DOESN'T WORK?
You tell me
INSTRUCTIONS
Clean Flash
Download The ROM & GApps
Wipe: System, Data, Dalvik, Cache
Flash ROM + GApps
Reboot & Enjoy
Dirty Flash
Download the ROM
Wipe: Dalvik and Cache
Flash ROM (+Magisk if rooted previously or if want root)
Reboot & Enjoy
DOWNLOADS
ROM: Click Here for ROM
Gapps: Click Here for GApps
Note: Pico, Nano or Micro Gapps are recommended. We don't prefer STOCK/HEAVY Gapps
Source Code
Device Sources:
Device tree | Kernel | Vendor
Special thanks to
AOSP
LineageOS
XDA: DevDB Information
ArrowOS, ROM for the Xiaomi Redmi 4X
Contributors
Skssbss
Source Code: https://github.com/ArrowOS
Credits:-
 @prakash_S @wajid @dancel007 @swapnil @ Nikesh
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.18.x
ROM Firmware Required: Latest Firmware
Based On: AOSP
Version Information
Status: Unoffical
Current Stable Version: 9.x
Stable Release Date: 2018-09-23
Created 2018-09-23
Last Updated 2018-09-23

Amazing ?

Hi, thanks for another PIE rom for Santoni !
no major bugs ?
Is it ok to root with magisk ?

Ok magisk . Working fine
I8
newbie_or_not_newbie said:
Hi, thanks for another PIE rom for Santoni !
no major bugs ?
Is it ok to root with magisk ?
Click to expand...
Click to collapse

Looks interesting. I'll wait for some testers first.

Thanks @pavankatari for this nice rom! It´s the first pie rom with working magisk for me.
Btw where can I find the settings for network status, battery icon and something else? And I´m missing advanced reboot button for recovery.
---------- Post added at 06:31 PM ---------- Previous post was at 06:30 PM ----------
Edit: Found network status and battery icon under network and display settings. Is there a customation to add advanced reboot button at power button?

is very elegant this rom the only detail is that it does not give me the option of unlocking with footprint

Blaster27 said:
is very elegant this rom the only detail is that it does not give me the option of unlocking with footprint
Click to expand...
Click to collapse
Unlocking your phone with your feet is not recommended.

What a disappointment! After installing magisk it runs well for the very first time on a pie rom for me, but after a reboot the same issue: Magisk manager said magisk is not installed . I faced the same issue on other pie roms like havoc or pixys, tried different versions of magisk - no success. I´m really helpless about this...

Bad news, magisk not working...

Not able to install magisk.. Any help

Deleted
Wrong thread

Lemmy554 said:
What a disappointment! After installing magisk it runs well for the very first time on a pie rom for me, but after a reboot the same issue: Magisk manager said magisk is not installed . I faced the same issue on other pie roms like havoc or pixys, tried different versions of magisk - no success. I´m really helpless about this...
Click to expand...
Click to collapse
did you try normal install magiskmanager.apk after flashing magisk.zip?
fyi i havent experienced any issues on magisk on every pie roms ive tested including those roms you mentioned.

ian97 said:
did you try normal install magiskmanager.apk after flashing magisk.zip?
fyi i havent experienced any issues on magisk on every pie roms ive tested including those roms you mentioned.
Click to expand...
Click to collapse
Yes I did but this wasn´t the reason. It seems it depends to the kernel. The only working kernel with magisk is jaguar kernel 7.5.29. There are a lot of guys with the same issue, but curiously not all santoni users.
There´s an own thread:
https://forum.xda-developers.com/xiaomi-redmi-4x/help/magisk-doesnt-pie-roms-t3848025
Currently this issue is still open...

Magisc not installed this problem is by twrp problem
Few days i noticed this problem i found Magisc is not installed by twrp but different twrp installed than magisc installed succesfully...
Lets enjoy magisc with other twrp

[sGSI 9.0] AOSiP / Pixel Experience / AOSP //Personal Builds [S9/S9+/N9]

If you still want to run an SGSI (we have device specific roms now), I strongly recommend vanilla aosp. It is by far the smoothest and just simply works without issues. I will maintain AOSP for security patches until i'm using device specifics as a daily (still some bugs left). Go for my AEX or POSP now
What is this thread?
This thread is hosting my personal builds of sGSI's. As we don't have stable device specific Pie roms yet I believe this is still in high demand for you people that love AOSP roms and are patiently waiting for development. Until we have a stable device tree (which would translate into stable device specific roms) I will be mainting these builds. Aside from a few minor quirks these builds should work fine for daily usage.
What are the quirks?
For getting bluetooth to work you need a permissive kernel. You can use the magisk module provided in my mega library.
The statusbar padding is a bit off by default (fix is in my library as well)
AOSiP has longer boottime
What ROMS can I choose from?
For now my stable sGSI's are AOSiP, Pixel Experience and AOSP.
What vendor/firmware/kernel to use for what rom?
AOSiP:
S9/S9+ needs BRK3 vendor/firmware and endurance AOSP kernel
N9 needs ARH6 vendor/firmware and endurance GSI kernel
Pixel Experience:
S9/S9+ needs BRK3 vendor/firmware and endurance AOSP kernel
N9 needs ARH6 vendor/firmware and endurance GSI kernel
AOSP:
S9/S9+ needs BRK3 vendor/firmware and endurance GSI kernel
N9 needs ARH6 vendor/firmware and endurance GSI kernel
Flashing instructions
1. Wipe everything
2. Flash firmware
3. Flash vendor
4. Flash gsi to system
5. Reboot recovery
6. Flash gapps
7. Flash kernel
8. Reboot
Note: skip step 5 and 6 for roms with gapps included
If you have an issue flashing gapps because of insufficient space, do the following in TWRP. Advanced wipe -> System Partition -> Repair or Change File System and Repair and Resize
Downloads:
This is my MEGA library where I host all the files you need for running your sGSI (and some extras): https://mega.nz/#F!wFFQUYbI!GZvNOBSn1wVn8U9mQDzBiw
Source code
https://github.com/TheCrazyBeaver/device_phh_treble
Credits:
Phhusson for his generic device tree
Codefox for being my main honi, the semi generic device tree and foxytreble
AzzyC for being my second honi
Eamo5 for his godlike endurance kernel
P.S. Note 9 plebs are welcome here but I won't make a thread in Note 9 forum as I don't own the device
XDA:DevDB Information
[sGSI 9.0] AOSiP / Pixel Experience / ViperOS //Personal Builds [S9/S9+/N9], ROM for the Samsung Galaxy S9
Contributors
CrazyBeaver2377, CrazyBeaver2377, CodeFox
Source Code: https://github.com/TheCrazyBeaver/device_phh_treble
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: BRK3 Vendor / Firmware
Based On: AOSP
Version Information
Status: Beta
Created 2019-02-04
Last Updated 2019-02-11
XDA:DevDB Information
[sGSI 9.0] AOSiP / Pixel Experience / AOSP //Personal Builds [S9/S9+/N9], ROM for the Samsung Galaxy S9
Contributors
CrazyBeaver2377, CrazyBeaver2377, Codefox, Rainbow_Dash
Source Code: https://github.com/TheCrazyBeaver/device_phh_treble
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: BRK3 Vendor / Firmware
Based On: AOSP
Version Information
Status: Beta
Created 2019-02-04
Last Updated 2019-02-13

reserved

Cheers, moving to your builds from now on mate

Thanks will try it tomorrow

arh6 vendor in Note9 does not install. In Download mode it gives the error : SystemDev Check Fail.Device:2 Binary 1....
Everything else works ok.

I just uploaded AOSiP, beware this is not tested yet by anyone so it might not boot!
Edit: AOSiP reported working!

Nice work I liked it
Please don't stop on this thread and tell us about any updates

"The Guy".
Thanks for all your releases man! PE is awesome along with Viper!
Since we are on the plate of AOSP roms, can we bring Euphoria back?
Or even Hazy / Discovery rom?
Thank you for all your work!

oreo firmware/vendor for a pie rom? didn't understand that though

carlesmc said:
I can`t flash on system ( twrp)
Click to expand...
Click to collapse
What do you mean exactly? You need to press the install image button and then install the system.img to the system partition.

here
edit
awesome job man

CrazyBeaver2377 said:
What do you mean exactly? You need to press the install image button and then install the system.img to the system partition.
Click to expand...
Click to collapse
I get the following error:
Cannot flash images to system

Thanks beaver! Awesome to see you publishing your work here too // macke @ teleg

Finally something new and fresh, good work ? don't give up !

What do you think about ResurrectionRemix v7.0 Pie?
Have you tried it?
Sent from my SM-G965F using Tapatalk

carlesmc said:
I get the following error:
Cannot flash images to system
Click to expand...
Click to collapse
You might need to upgrade to latest TWRP

a0007 said:
What do you think about ResurrectionRemix v7.0 Pie?
Have you tried it?
Sent from my SM-G965F using Tapatalk
Click to expand...
Click to collapse
I build what I personally like, hence personal builds. And to be honest I don't like RR (overfeatured)
If there is high demand for one particular rom I might build it and drop one that is in low demand.
As I don't want to use up too much storage and time fixing build errors I want to stay with 3 ROMs maximum.

carlesmc said:
I get the following error:
Cannot flash images to system
Click to expand...
Click to collapse
Its weird and I've had it before, just don't erase system before trying to flash, just do a factory reset, then flash the image over system, I had that error but using this works every time

CrazyBeaver2377 said:
I build what I personally like, hence personal builds. And to be honest I don't like RR (overfeatured)
If there is high demand for one particular rom I might build it and drop one that is in low demand.
As I don't want to use up too much storage and time fixing build errors I want to stay with 3 ROMs maximum.
Click to expand...
Click to collapse
Aosip working nicely on S9 here mate:good::good:

Thanks for you work , I'll flash viperOS on my N9 later tonight, thanks again.

[DISCONTINUED] [XZ][F8331/2] AOSP Android 10 builds

[DISCONTINUED] Builds at sx.ix5.org in the aosp-10 directory.
Changelog here: https://sx.ix5.org/changelog.html
Install guide: Flashing AOSP on Xperia XZ
You still need the "Pie" Software Binaries version 9. Do not use the Android 10/Kernel 4.14 images.
XDA:DevDB Information
Xperia XZ AOSP Android 10 builds, ROM for the Sony Xperia XZ
Contributors
local__hero
Source Code: https://git.ix5.org/felix/local-manifests-ix5/src/branch/ix5-customizations-10
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: Latest stock .184 / .192
Based On: AOSP
Version Information
Status: Nightly
Created 2019-10-20
Last Updated 2019-10-20

Reserved

Reserved

Download gapps from this link: https://www.cyanogenmods.org/downloads/pico-opengapps-for-android-10-arm64/
Instructions to install gapps:
1-Flash rom zip and magisk (optional)
2-Boot the device once (yes don't flash gapps on first boot because of a bug with android setup)
3-After you boot the device once go back to the recovery. If you didn't flash magisk in last step your recovery will be overwriten by aosp recovery. If that happens just reflash twrp using fastboot.
4-Flash gapps
5-Boot the device now you will get error like "Android setup has stopped working". Just click more info and disable android setup from settings.
6-Login to your google account by running play store and follow the simple steps.
Android setup bug may get fixed in stable versions of gapps but for now install it like this.

I tried to follow the procedure updating my OmniRom 9.0 but the phone goes into bootloop.

i've also tried everything several times different species and versions, without gapps it works! (intigriter update button missing?)

Thanks a lotʕっ•ᴥ•ʔっ

F8332
Rom for f8332 Sim 2 not works.

I like this rom but i installed 2 times and all the time cpu could be 55-60 degrees and randomly reboot. I cant fix this.

F8332
Gps not working. I can fix this.

Hope the ROM will grow as mature as daily driver!
XperiaXZ F8331, newest stock Oreo (unlockedBL), TaiChi modules like Xedge

ibondd said:
I like this rom but i installed 2 times and all the time cpu could be 55-60 degrees and randomly reboot. I cant fix this.
Click to expand...
Click to collapse
Disable finger print unlocking and try again. Also uninstall any kernel tweak mods.
---------- Post added at 08:33 AM ---------- Previous post was at 08:30 AM ----------
Bekoll1003 said:
Gps not working. I can fix this.
Click to expand...
Click to collapse
Install "Global Optimized GPS File Replacer" from magisk.

I haven't any tweaks or kernel. I have stock oreo and i using aosp kernel when i installed android 10
My fingerprint hardware is doesn't working. How can i disable this?. My stock rom is doesn't see fingerprint sensor but this rom can see

ibondd said:
I haven't any tweaks or kernel. I have stock oreo and i using aosp kernel when i installed android 10
My fingerprint hardware is doesn't working. How can i disable this?. My stock rom is doesn't see fingerprint sensor but this rom can see
Click to expand...
Click to collapse
Maybe your stock firmware is from the U.S? they have it disabled over there

archie_77 said:
Maybe your stock firmware is from the U.S? they have it disabled over there
Click to expand...
Click to collapse
İ have latest oreo CUSTOMİZED TR

Deleted

f8332
I hope there will be dual sim support for f8332 in the future. Thanks. I really like this rom

What about Android 10 TREBLE rom?

xperia xz f8331 Android 10.0.
LukianX said:
What about Android 10 TREBLE rom?
Click to expand...
Click to collapse
İ am writing this article android 10.0 Nightly.
Very very good. Everything is working right now.
Excelent. Thanks to those who contributed.

Fatih--xz said:
İ am writing this article android 10.0 Nightly.
Very very good. Everything is working right now.
Excelent. Thanks to those who contributed.
Click to expand...
Click to collapse
Which ROM is this? Is this quack treble by phhusson?

[ROM][13][UNOFFICIAL][mata] LineageOS 20

Important information:
This thread is for LineageOS 20 opensource builds for Essential Phone. The following will not be supported in this thread:
Custom Kernels
Mods
Modified system files
Xposed
Magisk
What's not working:
You tell me
Installation:
If you are on the stock OS, you will first need a custom recovery. You can get the recommended Lineage recovery here.
If you are coming from stock or other ROMs, you need to do a factory reset.
As always, make sure to backup before installing this ROM.
For more detailed instructions, please visit:
Install LineageOS on mata
Download link:
SourceForge
Recommended Google Apps package:
MindTheGapps
NikGApps
Bug reports:
How to submit a bug report
Gitlab Issues
Donate to support development:
Donate via PayPal to tipzrickycheung
Donate via PayPal to npjohnson
Donate via PayPal to LineageOS
Source Code:
Device tree
Kernel
LineageOS Github
Contributors
@tipzrickycheung, @npjohnson, Lineage Team
ROM OS Version: 13.x T
ROM Kernel: Linux 4.4.x
Based On: LineageOS

Essentially reserved.

The 20220923 build should really be considered a demo as accessing the Internet isn't possible yet, we will fix this asap.

I installed the 20220923 build. To my surprise, the internet works well.

myopetz said:
I installed the 20220923 build. To my surprise, the internet works well.
Click to expand...
Click to collapse
What I meant by the Internet isn't the WiFi icon or LTE icon, it's the fact you can't connect to any website.

@tipzrickycheung
The recovery link in the OP points to Wingtech/Xiaomi Redmi 2's LineageOS download page. It should be replaced with this one.

Anyone been able to install GApps? There was something regarding a zip file to resize the system partition in the OP yesterday, but not seeing it now.

cucumbersmell said:
Anyone been able to install GApps? There was something regarding a zip file to resize the system partition in the OP yesterday, but not seeing it now.
Click to expand...
Click to collapse
That was just a mistake, not needed.

New release
20220930
Changelog:
Sync with latest LineageOS sources
Fixed accessing the Internet
Download

tipzrickycheung said:
New release
20220930
Changelog:
Sync with latest LineageOS sources
Fixed accessing the Internet
Download
Click to expand...
Click to collapse
Thanks! Will give a try tonight. Were you able to install NikGapps with the new build? I tried Basic and Core on the initial build and got a "installation failed due to lack of space".

cucumbersmell said:
Thanks! Will give a try tonight. Were you able to install NikGapps with the new build? I tried Basic and Core on the initial build and got a "installation failed due to lack of space".
Click to expand...
Click to collapse
I didn't actually try installing Gapps.

New release
20221001
Changelog:
Optimised props
Fixed log spam
Applied temporary fix for download files in Jelly
Download

any chance this will be official?

MrMundy said:
any chance this will be official?
Click to expand...
Click to collapse
Yes, will be when LineageOS 20 is officially out.

Appreciate the updates! I'm still not able to get any GApps to install. If someone else manages to, please let me know what package and method you used.
Thanks

great job!

tipzrickycheung said:
Important information:
This thread is for LineageOS 20 opensource builds for Essential Phone. The following will not be supported in this thread:
Custom Kernels
Mods
Modified system files
Xposed
Magisk
What's not working:
You tell me
Installation:
If you are on the stock OS, you will first need a custom recovery. You can get the recommended Lineage recovery here.
If you are coming from stock or other ROMs, you need to do a factory reset.
As always, make sure to backup before installing this ROM.
For more detailed instructions, please visit:
Install LineageOS on mata
Download link:
SourceForge
Recommended Google Apps package:
MindTheGapps
NikGApps
Bug reports:
How to submit a bug report
Gitlab Issues
Donate to support development:
Donate via PayPal to tipzrickycheung
Donate via PayPal to npjohnson
Donate via PayPal to LineageOS
Source Code:
Device tree
Kernel
LineageOS Github
Contributors
@tipzrickycheung, @npjohnson, Lineage Team
ROM OS Version: 13.x T
ROM Kernel: Linux 4.4.x
Based On: LineageOS
Click to expand...
Click to collapse
Bluetooth audio does not work, the device connects but there is no sound from the Bluetooth device

Can_youHelpme? said:
Bluetooth audio does not work, the device connects but there is no sound from the Bluetooth device
Click to expand...
Click to collapse
That's interesting, I will have to check what's wrong with that. Thanks for reporting.

Opinion from the people using this - how does the PH-1 handle the ROM? Mainly asking from the perspective of the phone's hardware capability Vs Android 13.

The RIL stack on msm8998 devices may be too old to work well/properly on A13.
I'm not the right person to comment on the PH-1's A13 status (or that of other msm8998 devices), or on whether fixes are possible (or not)... these need a dev's reply.