PokeMON BootLogo Moto G3 - Moto G 2015 Themes and Apps

Hello Friendss .... I'm Back with My new CollecTions of BootLogo for Our Moto G3 ....
POKEMON BOOTLOGO LIMITED EDITION
Download The Zip Files from The Attachment .... For your convenience I have also attached the How ur Bootlogo Screen after flashing the Zip file....
Flashing Instructions :
Extract The Zip in the ADB-Fastboot folder
Type The command >> fastboot flash logo logo.bin
after successful flashing .... Type command >>> fastboot reboot --- hit enter BOOOOOOOM
there u go ur new Pokemon Boot Logo screen
Flashing with TWRP is not recemonded ......
Hope U like it .... :fingers-crossed::fingers-crossed:
U can also tell me to make bootlogo as u wish for ur moto g3
Thank U guyzzz

Close This Thread

Nice work mate.. keep go well..
---------- Post added at 11:24 AM ---------- Previous post was at 11:24 AM ----------
abhi8939 said:
Close This Thread
Click to expand...
Click to collapse
Why you want to close this thread ?

Why flash through fastboot when you can simply replace the logo.bin via TWRP or root file management.

rahul9999 said:
Nice work mate.. keep go well..
---------- Post added at 11:24 AM ---------- Previous post was at 11:24 AM ----------
Why you want to close this thread ?
Click to expand...
Click to collapse
cz there are so many thread in the forum already and i dont want any one to navigate through so many pages to find there answer of there problem ..... :angel: Thnx buddy for appreciating the Work

Related

[q] please help please help!!

i recently installed [ROM] GingerXperiaRay_V003 for nAa.. but i don't know why i can't start up my phone anymore...OMG...!!! he stuck at the sony ericsson word there.. please help.. and after that i go back to see the threat, then i know need to flash the nAa 1st.. but i didn't do it.. what should i do now?? PLEASE help :'(
yuyukakei said:
i recently installed [ROM] GingerXperiaRay_V003 for nAa.. but i don't know why i can't start up my phone anymore...OMG...!!! he stuck at the sony ericsson word there.. please help.. and after that i go back to see the threat, then i know need to flash the nAa 1st.. but i didn't do it.. what should i do now?? PLEASE help :'(
Click to expand...
Click to collapse
relax, try this http://forum.xda-developers.com/showthread.php?t=1011071
Just do a full wipe in cwm recovery
If it does not help, go to stock kernel and flash stock rom using flashtool
No space for panic !!!
... be patient and follow Kirmada`s link instruction and your phone will be fine...
DON`T FORGET TO THANKS HIM>>>
kirmada said:
relax, try this http://forum.xda-developers.com/showthread.php?t=1011071
Click to expand...
Click to collapse
no.. i cant boot in to xRecovery.. it just stucked at Sony Ericsson word there.. i press back many time already.. any other suggestion??
yuyukakei said:
no.. i cant boot in to xRecovery.. it just stucked at Sony Ericsson word there.. i press back many time already.. any other suggestion??
Click to expand...
Click to collapse
do u even read the whole things,ur phone is bricked,so i posted a link on how to unbrick ur phone,u jus read the xrecovery section,go down and read bout flashtool too,dats the tool to unbrick ur phone
---------- Post added at 11:19 AM ---------- Previous post was at 11:16 AM ----------
yuyukakei said:
no.. i cant boot in to xRecovery.. it just stucked at Sony Ericsson word there.. i press back many time already.. any other suggestion??
Click to expand...
Click to collapse
or try this too http://sony-ericsson-update-service.en.uptodown.com/
THANKS!!
kirmada said:
do u even read the whole things,ur phone is bricked,so i posted a link on how to unbrick ur phone,u jus read the xrecovery section,go down and read bout flashtool too,dats the tool to unbrick ur phone
---------- Post added at 11:19 AM ---------- Previous post was at 11:16 AM ----------
THANKS!!
Click to expand...
Click to collapse
yuyukakei said:
kirmada said:
do u even read the whole things,ur phone is bricked,so i posted a link on how to unbrick ur phone,u jus read the xrecovery section,go down and read bout flashtool too,dats the tool to unbrick ur phone
---------- Post added at 11:19 AM ---------- Previous post was at 11:16 AM ----------
THANKS!!
Click to expand...
Click to collapse
???got through
Click to expand...
Click to collapse

Can someone create me a boot img for cdma

If I pull the files and link them for you can you make me the boot .img or actually mean the system img
http://www.filefactory.com/file/663sfijpfz8x/n/New_WinRAR_archive_rar
heres the link
There you go!
I couldn't upload it here, don't know why, so i uploaded it to my dropbox! here's the link i hope it helps. https://www.dropbox.com/s/9dfigsdntvhef33/System.zip
---------- Post added at 12:36 PM ---------- Previous post was at 12:27 PM ----------
Don't forget to hit that thanks button!
thanks for that alex now i need the boot img
I could try and make you one if i had the kernel for your phone!
here the link for the source code for my phone if thats what you need
http://dl4.htc.com/RomCode/Source_and_Binaries/golfc-ics-3.0.16-3d39477.zip
actually could look here mine is the desire c cricket usa http://www.htcdev.com/devcenter/downloads

h811 stock images

Anyone know where I can find the stock 10h images for our phone? I need to flash the stock bootloader and modem.
motojdm said:
Anyone know where I can find the stock 10h images for our phone? I need to flash the stock bootloader and modem.
Click to expand...
Click to collapse
can it b H811 N ?
Hit thnx if this helpd
---------- Post added at 10:12 PM ---------- Previous post was at 10:07 PM ----------
https://drive.google.com/file/d/0B-_A25cR0bQFV21vYkFwY3NoVE0/view?usp=sharing
joshualuna said:
can it b H811 N ?
Hit thnx if this helpd
---------- Post added at 10:12 PM ---------- Previous post was at 10:07 PM ----------
https://drive.google.com/file/d/0B-_A25cR0bQFV21vYkFwY3NoVE0/view?usp=sharing
Click to expand...
Click to collapse
downloading now. what is the source of this image?
http://forum.xda-developers.com/tmobile-g4/development/h81110n-stock-rooted-image-t3191038 heres insructions on how to install or i used youtube "how to root lg g4" much easier to follow the vid. Good luck. Message me if u got it goin
Hit thnx if this helpd
This is to be used only if you already have the 10N bootstack already flashed. I would use micromod's 10N flash to stock then use this for root.
Here's the link:
http://forum.xda-developers.com/showthread.php?t=3191756

HARDBRICK

I HARDBRICKED MY DEVICE I GUESS. I WAS UPGRADING FROM KITKAT TO LOLLIPOP AND BUT THE DEVICE DIDN'T START DURING THE INSTALLATION. IT WON'T BOOT UP IN FASBOOT . IT IS COMPLETELY DEAD. PLEASE HELP :crying::crying:
Which device r u usin?
somatil said:
Which device r u usin?
Click to expand...
Click to collapse
XT1068
utkarsh agarwal said:
I HARDBRICKED MY DEVICE I GUESS. I WAS UPGRADING FROM KITKAT TO LOLLIPOP AND BUT THE DEVICE DIDN'T START DURING THE INSTALLATION. IT WON'T BOOT UP IN FASBOOT . IT IS COMPLETELY DEAD. PLEASE HELP :crying::crying:
Click to expand...
Click to collapse
Every second thread is about hardbrick in this topic..
somatil said:
Which device r u usin?
Click to expand...
Click to collapse
zman01 said:
Every second thread is about hardbrick in this topic..
Click to expand...
Click to collapse
there's no solution but
zman01 said:
Every second thread is about hardbrick in this topic..
Click to expand...
Click to collapse
U NEED TO FLASH STOCK ROM
FOLLOW THIS LINK http://forum.xda-developers.com/moto-g-2014/general/official-stock-firmware-t3018682
---------- Post added at 11:33 AM ---------- Previous post was at 11:32 AM ----------
utkarsh agarwal said:
I HARDBRICKED MY DEVICE I GUESS. I WAS UPGRADING FROM KITKAT TO LOLLIPOP AND BUT THE DEVICE DIDN'T START DURING THE INSTALLATION. IT WON'T BOOT UP IN FASBOOT . IT IS COMPLETELY DEAD. PLEASE HELP :crying::crying:
Click to expand...
Click to collapse
U NEED TO FLASH STOCK ROM / OFFICIAL FIRMWERE
FOLLOW THIS LINK
\\\
http://forum.xda-developers.com/mot...ock-firmware-t3018682:good::good::good::good:
utkarsh agarwal said:
there's no solution but
Click to expand...
Click to collapse
A solution there is. Motorola won't give over the files that are needed for this fix...
hobner said:
U NEED TO FLASH STOCK ROM
FOLLOW THIS LINK http://forum.xda-developers.com/moto-g-2014/general/official-stock-firmware-t3018682
---------- Post added at 11:33 AM ---------- Previous post was at 11:32 AM ----------
U NEED TO FLASH STOCK ROM / OFFICIAL FIRMWERE
FOLLOW THIS LINK
\\\
http://forum.xda-developers.com/mot...ock-firmware-t3018682:good::good::good::good:
Click to expand...
Click to collapse
Get some information before you post nonsense
But I will be very thankful if you can explain me how to flash stock rom without working bootloader?

//SM-G890A\\ **Stock Firmware G890AUCU4CPF1**

As usual xda members ... This is stock PF1 MM firmware ... Enjoy!
AP_G890AUCU4CPF1_CL8347181_QB9920104_REV02_user_low_ship.tar.md5
BL_G890AUCU4CPF1_CL8347181_QB9920104_REV02_user_low_ship.tar.md5
CP_G890AUCU4CPF1_CL8347181_QB9920104_REV02_user_low_ship.tar.md5
CSC_ATT_G890AATT4CPF1_CL8347181_QB9920104_REV02_user_low_ship.tar.md5
https://www.dropbox.com/s/ysvmpb3p61vdeq7/G890AUCU4CPF1_MM.zip?dl=0
Downloading now! Will update once flashed.
loustu said:
Downloading now! Will update once flashed.
Click to expand...
Click to collapse
Let me know .. enjoy!
i downloaded the file and place it on my adb folder and i also copied the exact name of the file i did shift right click and went into command i put
adb sideload G890AUCU4CPF1_MM or G890AUCU4CPF1_MM.zip but i kept getting cannot read what am i doing wrong?
Chillin2323 said:
i downloaded the file and place it on my adb folder and i also copied the exact name of the file i did shift right click and went into command i put
adb sideload G890AUCU4CPF1_MM or G890AUCU4CPF1_MM.zip but i kept getting cannot read what am i doing wrong?
Click to expand...
Click to collapse
You need to extract it and use Odin
JUSMEJOSE said:
You need to extract it and use Odin
Click to expand...
Click to collapse
let me try that i have been trying all morning to get marshmellow but no luck let me try that and il let you know if successful
---------- Post added at 05:11 PM ---------- Previous post was at 04:32 PM ----------
Chillin2323 said:
let me try that i have been trying all morning to get marshmellow but no luck let me try that and il let you know if successful
Click to expand...
Click to collapse
okay so used odin and flashed it on and got a final pass successful but its stuck on the boot logo
Chillin2323 said:
let me try that i have been trying all morning to get marshmellow but no luck let me try that and il let you know if successful
---------- Post added at 05:11 PM ---------- Previous post was at 04:32 PM ----------
okay so used odin and flashed it on and got a final pass successful but its stuck on the boot logo
Click to expand...
Click to collapse
boot might take 5-10 minutes i noticed that on my side ...
JUSMEJOSE said:
As usual xda members ... This is stock PF1 MM firmware ... Enjoy!
https://www.dropbox.com/s/ysvmpb3p61vdeq7/G890AUCU4CPF1_MM.zip?dl=0
Click to expand...
Click to collapse
Thank you so much! Downloading now...!
P.S. If you manage to find the latest G890AUCS4CPF3, please shout.
g890a 6.0.1
bro the link doesn't work anymore do you have any other link please
Yeah, throws a 429 error. Can someone upload to Mega?
Can anyone get the latest firmware for G890a and G891A. PI3 Please?
Link please
thank you
Re upload
Can someone reupload this firmware version please? Want to update to nougat. Thanks
---------- Post added at 01:18 AM ---------- Previous post was at 01:11 AM ----------
And is it possible to root the g920a? Been wanting to install titanium
its on easy firmware .. let me download it & upload it somewhere
G890AUCU6DQD1_7.0_4File_USA (AT&T).7z
link caido
JUSMEJOSE said:
As usual xda members ... This is stock PF1 MM firmware ... Enjoy!
AP_G890AUCU4CPF1_CL8347181_QB9920104_REV02_user_low_ship.tar.md5
BL_G890AUCU4CPF1_CL8347181_QB9920104_REV02_user_low_ship.tar.md5
CP_G890AUCU4CPF1_CL8347181_QB9920104_REV02_user_low_ship.tar.md5
CSC_ATT_G890AATT4CPF1_CL8347181_QB9920104_REV02_user_low_ship.tar.md5
el link para la descarga del firmware esta caido amigo. lo puede restaurar?
Click to expand...
Click to collapse

Categories

Resources