Hi dear developers,
I just got my new Galaxy Tab S2, T813. Updated it to Nougat, firmware T813XXU2BQD1_T813OXA2BQD1_DBT. I rooted it via Chainfire's autoroot and worked perfectly fine. I installed the latest TWRP (twrp-3.1.1-1-gts210vewifi), advance wiped in twrp (like tens of times before with Galaxy S5, Galaxy S7, Redmi 4, ZUK Z2, Xiaomi Mi 5s, LG G2 etc.). I flashed Lineage 14.1 (Lineage-14.1-20170516-nightly-gts210vewifi) but when I rebooted the phone Lineage setup would not start. I went back and advance wiped again and installed an older Lineage version but again the same. I advance wiped again and installed Omni (Omni-7.1.2-20170521-gts210vewifi-weekly), but here again setup would not start. I reformatted the data in twrp and reinstalled Lineage 14.1 but again the same. So I went back and flashed via Odin3_v3.12.3 the stock firmware (for Germany) T813XXU2BQD1_T813OXA2BQD1_DBT. Odin command was pass and i though everything was fine. When the original firmware rebooted i have the same problem, the setup would not start and starting apps would crash. I entered recovery (of course stock recovery because twrp has been wiped by odin), but it says "no command".
Smart Switch would not support my device although it actually should.
I tried to flash via odin also on my second PC but again the same problem. Both PCs are running Windows 10.
I never faced something like this before. And after hours of search I found nothing. Please help me solve my problem so that i can install at least one firmware (no matter which one: Stock, Lineage, Omni etc.).
When you flashed lineageOS or omni rom, did you also flash gapps?
musashiken said:
When you flashed lineageOS or omni rom, did you also flash gapps?
Click to expand...
Click to collapse
First time flash:
+ clean advanced wipe
+ lineage
+ gapps (ARM64, Android 7.1, Pico)
+ addonSU
other times flash:
+ clean advanced wipe
+ lineage
or
+ clean advanced wipe
+ omni
I believe either flashing Chainfire Autoroot file or flashing TWRP might have caused the problem and might have deleted something or maybe i deleted something during first time wipe via twrp.
Is there a patch or aboot or something to flash via Odin prior to flashing the stock firmware to correct the problem with stock rom setup blockade?
Ok, I'm not sure what went wrong with how you did stuff but let's not use Chainfire's autoroot again. The best way to root is to do it manually.
Anyway, firstly you should be able to go back to stock samsung firmware by using Odin and flashing the full tar file. I'm not sure why that is not working for you as that's the only way to reset and fix your tablet.
Please check how to flash the full firmware via Odin again.
- ensure you downloaded the correct nougat firmware file. Latest LineageOS should require the EU version of the nougat firmware. I think it is T813XXU2BQD3. Not the firmware you used.
Once you are able to load a fresh samsung firmware, then come back again. I'll see if I can guide you through the TWRP and rooting process again.
musashiken said:
ensure you downloaded the correct nougat firmware file. Latest LineageOS should require the EU version of the nougat firmware. I think it is T813XXU2BQD3. Not the firmware you used.
Click to expand...
Click to collapse
Thanks fo the tip with the new version of firmware. I installed the firmware ...QD3 via Odin...
Closed per OP request
Related
Hello, I have been trying to flash for 2 days now but still couldn't get it working.
Initially, my I9305 is running on stock without root. I wanted to root it and then install recovery and ROM.
And so I prepare the necessary files, and start to flash.
I used CF-Auto-Root to root my device first, then got Resurrection ROM and Gapps to flash.
Then I started to get some issue, as it always fail. Error message like no file context and so on. So I read online resources, and found out that I had a older version of TWRP installed which may cause the install.
I then tried to upgrade TWRP but it doesn't allow me to. No choice, I had to flash philz touch, and I did.
I then tried to flash Resurrection again, boot up, and it keep giving me bootloop. After which I downloaded nameless ROM, and CM11 but same issue.
Yesterday night, I downloaded the stock firmware to try. I flashed it, and it is successful based on ODIN, but it still won't boot up.
I just tried it again and it stuck on the Samsung logo screen.
Can anyone tell me what else to do? What I have to do?
This is the stock firmware that I have downloaded and flash - I9305XXUENH1_I9305EVRENH1_EVR.
Let me know what other information I have to provide.
Thanks!
Here's the Download mode information.
Custom binary count: 9 counts
Current binary: samsung offical
System status: custom
Knox void: 1
RP SWREV: A2
Update: 16/1
I just tried to go into my recovery mode and apparently, it has been changed back to stock recovery which I assume is because I have flashed the stock firmware.
I am trying it yet again after wiping in stock recovery, to flash the stock firmware again now.
P.S: I have posted it in http://forum.xda-developers.com/galaxy-s3/help-i9305/qa-samsung-galaxy-s3-lte-roms-kernels-t2999494 but no reply. So trying my luck here.
Ok, this is funny. I waited for 2-3 days before posting here for help. And it doesn't work for all those days.
Now that I just posted, it finally worked. I am getting into the setup screen.
Anyway, for those people who may have the same issue as me in the future, try to wipe everything after flash to stock firmware. then flash stock firmware again.
After flash
It's a good call,as per your last post,to wipe data and factory reset after a flash and even a second install.Need to give time for changes to occur.Don' go too fast.HTH.
Hello guys! How are you?
I'm having some bugs with CyanogenMod 12.1 in my MotoG and haven't found nothing that could help me with my problem.
Well, here's the story:
My device had Android KitKat 4.4 as the stock rom and I updated it to Lollipop 5.0 before rooting.
Well, I unlocked the bootloader and used TWRP as a custom recovery and installed SuperSU.
I've been using the phone about almost 8 months after rooting and then, Motorola released an update, I tried to update it via OTA and, of course, it didn't worked since TWRP can't OTA. Nothing changed in my phone, I simply rebooted it and it worked but since a few days some apps started to suddenly close and/or stop.
I decided to install CyanogenMod 12.1, downloaded the latest nightly and a stock package of GApps and flashed them via TWRP.
Wiped Dalvik Cache, Data, Cache and System
At the first attempt, TWRP rebooted after flashing CM12.1 and I wiped the caches via WIPE menu before flashing GApps wich couldn't be installed because there was "no space in storage". Well, I booted my phone normally (running cm12) and downloaded a Micro GApps package and flashed it sucessfully.
Problem is: Clock stops working (it has stopped for now), I can't install some apps from PlayStore such as Facebook, etc and my phone appears to be unrooted.
I think my TWRP is bugged or something cause it does not works as tutorials, etc tells...It shows some errors and sometimes reboots itself after flashing some file.
Do you guys think I should reset everything and then redo all the steps to use CyanogenMod properly? I really liked this custom rom but I'm afraid there will be more bugs in the future....
Anyone?
my solution..
1. (JUST SAYING)You can install ota through fastboot. Use the ota file found in root.( There is a thread for this)
2. Try installing Lucas 2.8.7.0 build. Find it in his thread. Its posted there. It's somewhere in the sea of posts just find it.
3. Then try to clean flash cm 11 build. Then install cm 12.1 build.
4. See if it works.
I don't understand why you face this problem cause well TWRP is very stable.
Well see if it works and get back to me.
Edit :
Saved you some trouble here's the link for TWRP
Link : https://drive.google.com/file/d/0B0WGdtNWubBJVlctNE5PZ1oyQ00/view?pli=1
Its labelled as 2.8.7.0 but its actually 6.0 features of 7.0.
sagar846 said:
1. (JUST SAYING)You can install ota through fastboot. Use the ota file found in root.( There is a thread for this)
2. Try installing Lucas 2.8.7.0 build. Find it in his thread. Its posted there. It's somewhere in the sea of posts just find it.
3. Then try to clean flash cm 11 build. Then install cm 12.1 build.
4. See if it works.
I don't understand why you face this problem cause well TWRP is very stable.
Well see if it works and get back to me.
Edit :
Saved you some trouble here's the link for TWRP
Link : https://drive.google.com/file/d/0B0WGdtNWubBJVlctNE5PZ1oyQ00/view?pli=1
Its labelled as 2.8.7.0 but its actually 6.0 features of 7.0.
Click to expand...
Click to collapse
This is exactly what you should do.
There are several things that don't work as they supposed to do, so follow the steps @sagar846 mentioned.
Sent from somewhere
Oniganon said:
Anyone?
Click to expand...
Click to collapse
cm 12 and 12.1 have some little bugs still but it is useable for daily use
I have a SM-G800F that's been running 4.2.2 forever. Last night I attempted to upgrade to 5.1.1 using Odin, afterwards I'm caught in a bootloop (just the Samsung logo). I tried recommended steps of wiping cache / factory reset from the recovery menu but no dice. I then attempted to flash 6.0.1 stock onto it, same problem.
Any help would be appreciated. When it was on 4.2.2 it was rooted with stock samsung fw and TWRP installed.
Just to add an update here, I flashed TWRP on it and then a LineageOS 14.1 Custom Rom with little hassle. Still not sure why the stock upgrade failed, possibly due to it being rooted already. Runs Android 7.1 beautifully so far.
I have an old Samsung Galaxy Tab 3 SM-T217A (S3..?) I got from ATT 10 years ago maybe and it's still in perfect condition. I'd like to root it and update the OS from 4.2.2 to 4.4.2... I have the ODIN and Samsung drivers. Can anyone provide further instruction on where to find a stable OS. I only want to use for Tiny CAM Pro...
Your device is Tab 3 7.0",
There seems to be unofficial build or Resurrection Remix Oreo, so far seems there's no bugs.
Try it:
https://forum.xda-developers.com/galaxy-tab-3/development-7/rom-resurrection-remix-n-v5-8-0-t3507947
It's easy, 1st flash TWRP via Odin, then get into recovery, do a simple wipe, flash ROM ( & GApps if you want), then reboot.
Mohamedkam000 said:
Your device is Tab 3 7.0",
There seems to be unofficial build or Resurrection Remix Oreo, so far seems there's no bugs.
Try it:
https://forum.xda-developers.com/galaxy-tab-3/development-7/rom-resurrection-remix-n-v5-8-0-t3507947
It's easy, 1st flash TWRP via Odin, then get into recovery, do a simple wipe, flash ROM ( & GApps if you want), then reboot.
Click to expand...
Click to collapse
This seems to be for sprint variant
hello, so i have a SM-N950F/DS and i had a cotum rom (Dr.Ketan ROM p11) for a year i think, so i want to update it with a new version. i try to flash a clean updated rom from Dr.Ketan but twrp failed (boot loop). then i tried to flash an android 10 rom (LineageOS 17.1) thad one work, but i lost my imei. so i decided to give up and restore my backup from my fist rom. and then the misery started. twrp failed to restore the back up. so i go to option 2 flash a clean stock rom with odin. the pc part work odin shows pass but my phone doesn't get any further than the bootlogo (the one that shows samsung note 8). and it does that with everyting now any costum stock rom and stock rom. and with a android 10 rom i get error 7 in twrp. i dont know what to do next.
i can enter download mode and recovery and flashing twrp after stock rom works too. i have treid various of stock fw from sammobile, Frija and updato
i also treid 2 difrend versions of fwrp (3.1.1-0 and 3.140-0)
edit: after looking carfuly what the phone does after flashing stock fw, I noticed that the phone say installing systeem update 32% and then starts erasing.
pic of my download mode:
https://imgur.com/a/eRy4UPF
You said lineage os worked. Have you tried installing it again?
soyuz4u said:
You said lineage os worked. Have you tried installing it again?
Click to expand...
Click to collapse
yes i have treid that and it was not working.