Stereo speaker MOD - Meizu Pro 5 ROMs, Kernels, Recoveries, & Other Dev

Nota: Descripción e instrucciones en español más abajo. Spanish description at the end.
I have edited the mixer_paths.xml file to make the earpiece speaker emits the same sound that speaker (filtered to high freqs only), so we have the same as xioami Mi6, Iphone 7, etc.
I have tested in Flyme 6, but the file edited is the same in Flyme 5, and all the @faust93 roms.
Installation methods:
1. With custom recovery TWRP: flash stereo_pro5.zip. For restoring to original status, flash restore_stereo_pro5.zip
2. With root: With a root explorer app, replace the file /system/etc/mixer_paths.xml by the attached mixer_paths.xml. For restoring to original status, replace /system/etc/mixer_paths.xml with file mixer_paths_org.xml attached.
Note: I can not be held responsible for possible failures. Do it at your own risk. There is some risk of using the earpice speaker as multimedia speaker at high volume, but the speaker don't seems to be suffering due to filtering low freqs. I have been using for a week without problems.
-------------------------
He editado el fichero mixer_paths.xml para hacer que el auricular suene a la vez que el altavoz (filtrando las bajas frecuencias). Así el Pro 5 tiene sonido sterero como el MI6, Iphone 7, etc.
Lo he probado en Flyme 6, pero debe funcionar en flyme 5 y en todas las customs roms ya que el fichero mixer_paths.xml siempre es el mismo.
Métodos de Instalacion
1. Con el custom recovery TWRP: Flashear el fichero stereo_pro5.zip. Para volver al estado original, flashear el fichero restore_stereo_pro5.zip
2. Con root: reemplazar el fichero /system/etc/mixer_paths.xml con el fichero mixer_paths.xml adjunto usando un explorador de archivos con permisos de root. Para volver al estado original, reemplazar el fichero /system/etc/mixer_paths.xml con el fichero mixer_paths_org.xml.
Nota: No me hago responsable si se estropea algún auricular. Evidentemente el auricular sufre más que si no se usa para multimedia. El auricular no parece sufrir mucho porque están filtradas las frecuencias bajas. Yo lo llevo usando una semana y no he tenido problemas.

Thanks man, the installation is one of the two method right?

zatagi said:
Thanks man, the installation is one of the two method right?
Click to expand...
Click to collapse
Yes one of them.
Regards

This is awesome thank you!!!

It will be great if there are some setting to lower the loud speaker volume (I wont need to volume to be that high) and make it truely stereo. It will be best

Hi dear. Make this great mod for m5 note also please..

zatagi said:
It will be great if there are some setting to lower the loud speaker volume (I wont need to volume to be that high) and make it truely stereo. It will be best
Click to expand...
Click to collapse
Here it is!!!
https://forum.xda-developers.com/me...meizu-pro-5-volume-editorroot-stereo-t3617752

xdamami said:
Hi dear. Make this great mod for m5 note also please..
Click to expand...
Click to collapse
Please send me your m5 note /system/etc/mixer_paths.xml to see if I'm able to do it without having that model.
Regards

p82maarj said:
Please send me your m5 note /system/etc/mixer_paths.xml to see if I'm able to do it without having that model.
Regards
Click to expand...
Click to collapse
Hi dear sorry for late response. I got device today but in etc i don't saw mixer_paths. xml first time on my android history check attached photos tell me which one Please.

Dear developer thank you for your great mod. I only have a problem with your mod. Every time I use headphone I cannot hear any sound with my headphone when I want to call someone or when some one call me but, playing music is okay only calling some one has this problem with headphone. When I replace your file with the orginal file the problem will disappear. I use Meizu HD 50 headphone and flyme V. 6.1.0.0G.

Can you make this mod for Pro 6 Plus, please? mixer_paths.xml on Google Drive: open?id=0B2COIJe86ltbSEh1LVdiQlc5Qk0

can you make this mod for meizu pro 7?

Related

Delete... No interest taken

Delete...
Alex_XV6700 said:
Ok guys so I'm a complete noob in developing roms and that stuff but I managed to update the Rom made by @justinswidebody (ATTFLEXROM JB) to Kitkat D95020b stock rom.
The process is pretty simple (always keep a backup of your EFS partitions it could be by FREEDOMFLEX app or a TWRP backup of it)
1. Return to stock with the flashable zip or ZV3 TOT with LG Flash tool.
2. Root - TWRP
3. Flash Justins ATTFLEX Rom.
4. From here you just have to set up the rom, Power OFF and go to DOWNLOAD MODE.
5. Flash ATTs Stock 20b TOT with LG Flash Tool.
6. Root (ioroot didnt work for me, but I used Towelroot app ) - TWRP
7. Flash a TWRP backup of the LS995ZV7 modem (M8974A-AAAANAZM-2.0.20049)
And thats it. You got KK D95020b rom on your LS995.
Mine is unlocked for GSM and I'm using it out of the US, so someone would have to test it over there.
I will upload my TWRP "modem only " backup if anyone needs it.
Will upload screenshots in a while I'm setting it up.
P.S. I have only found that NFC doesnt work.
What works?
DATA, RIL, WIFI, BT, TWRP - ROOT... KNOCK ON/OFF
Click to expand...
Click to collapse
Thank you,
I am going to give this a shot shortly
23bobbyg said:
Thank you,
I am going to give this a shot shortly
Click to expand...
Click to collapse
Just a quick question. If I make a backup of my current modem with TWRP ( currently I am running the att rom on my sprint Flex and just want to update to KK) and flash it after I update to the KK rom will that work?
I personally used my twrp backup of LS995ZV7 Modem. You could try that but probably it will not boot. Or just show "radio off"
OK
I will wait and download the one you post. As this is my everyday phone I do not want to mess it up
THanks
Check your PM.
Help
Hi friend, i did all but i lost my modem backup, can you upload a backup of your modem?, another question, i cant flash stock of sprint rom cause flash tools said me to isnt same models, have another way to return to sprint rom?
@bto001 use towelroot + supersu + freedomflex. Download the ls995 zip found in this guide made by @kintwofan http://forum.xda-developers.com/lg-g...de-to-t2814158
Remember to always hit the "thanks" button if my post helped you.
This way you can return to stock without the need to use flashtool.
I will PM you the link to my twrp modem backup.
Hablas español?
i didnt see thanks button =)
If I speak Spanish .
You send the link by PM .
Let me know if it works or if you have any problems .
Si hablo español.
Te envie el link por PM.
Me avisas si no funciona o si tienes algun problema.
xD
Yes, I saw that you live in Honduras , I pedia key decryption file , but I tell you that I could already solved , thanks, now I have another problem , that v20 gives me no signal is off radius ( the search signal ) not achieving turn it in any way , and modify multiple files and nothing , achievement let me choose the type of networks ( CDMA , lte , gsm) but I can not do that search , I jump error immediately and the * # * # 4636 # * # * sends me to the features of the phone , and let me see that the radio is turned off but will not let me pin , I click and do nothing, you will have some idea ?, I restore efs but still nothing , I put simunlock folder and nothing gives me problems postscript rom with usb connections , as they sometimes do not recognize the cell pc (only this rom) and second postscript: as it is over there ? I never left Mexico eh =). Thanks in advance. Nothing again eh version of justin but I do not like because I do not properly knock on , just do it in the center of the screen and it does kk wherever.
I solve That just installing root explorer and change into carpet system / build.prop the model and restart , then a flashing back tot With stock rom.
Si, vi que eres de honduras, me pedia clave de desencriptacion el archivo, pero te cuento que ya lo pude solucionar, gracias, ahora tengo otro problema, que la v20 no me da señal, tiene apagado el radio (la busqueda de señal), no logro encenderla de ningun modo, ya modifique varios archivos y nada, logro que me deje elegir tipo de redes (cdma,lte,gsm) pero no puedo hacer que las busque, me salta error inmediatamente y con el *#*#4636#*#* me manda a las caracteristicas del telefono, y me deja ver que el radio esta apagado pero no me deja prenderlo, le doy click y no hace nada, tendras alguna idea?, le restaure la efs pero igual nada, le puse una carpeta de simunlock y nada, posdata me da problemas la rom con las conexiones del usb, como que a veces no reconoce el celular la pc (solo con esta rom) y segunda posdata: como es por alla? nunca eh salido de Mexico =). Gracias de antemano. Por el momento eh vuelto a la version de justin pero no me gusta porque no me funciona bien el knock on, solo lo hace en el centro de la pantalla y con kk lo hace donde sea.
I solve that just installing root explorer and change into system carpet/build.prop the model and restart, then flashing back with tot stock rom.
As it is full of spectacular landscapes and places beautiful country .
Ok I'll explain .
The process is returned to stock 4.2.2 unlock and be sure to use the lame q gsm signal.
After you install the rom 4.2.2 attsprint of justinswidebody .
Here you do the upgrade to kitkat d950 with tot and flashtool .
D950 use towelroot install TWRP Once in kk and you loads the backup of my modem. If you do not charge the backup never grabs modem signal.
And I also have the problem of including usb to charge no q restart . I 'm working on that I think could be the kernel.
regards
Pues es un pais hermoso lleno de paisajes y lugares espectaculares.
Ok te explico.
El proceso es regresar a stock 4.2.2 usar el unlock y asegurarte q coja señal gsm.
Despues instalas la rom 4.2.2 attsprint de justinswidebody.
Aqui haces el upgrade a kitkat d950 con el tot y flashtool.
Ya estando en kk d950 usas towelroot instalas twrp y le cargas el backup de mi modem. Si no cargas el backup del modem jamas coje señal.
Y yo tambien tengo el problema de los usb inclusive para cargarlo hay q reiniciarlo. Estoy trabajando en eso creo que podria ser por el kernel.
Saludos
Orale , pass me the key for decryption of your modem, mega asks me =)
Orale, pasame la clave de desencriptacion de tu modem, me la pide mega =)
Gracias, este no me pide, el que me mandaste por pm si, intentare a ver que tal, con la att de just si tengo señal bien, pero esta es la del problema, pruebo meterle tu modem y te comento que paso xD
---------- Post added at 07:57 PM ---------- Previous post was at 07:52 PM ----------
Me marca error al intentar meterlo con el t y con el cwm, aborta la instalacion.
Op updated
bto001 said:
Gracias, este no me pide, el que me mandaste por pm si, intentare a ver que tal, con la att de just si tengo señal bien, pero esta es la del problema, pruebo meterle tu modem y te comento que paso xD
---------- Post added at 07:57 PM ---------- Previous post was at 07:52 PM ----------
Me marca error al intentar meterlo con el t y con el cwm, aborta la instalacion.
Click to expand...
Click to collapse
Did it work? I had no answer from you again.
I´m using another boot img and charging and mtp are working normally now.
Testing NFC it turns on but I have no other phone to test it with.
Hit me back pal! @bto001
Hola
Sorry for not having answered before, the truth had to come back to the version of the other partner because the cel occupied much use for work and did not have much time to play with , if you have another image Might porfavor0¿ post it ? for download in the afternoon and re-do the test , I had a working revoltura why you do not answer before =).
Sry for not answer you , but i have too many work to do , i cant use esta en cause have any available lot of work and need my cellphone for it , i didnt Have time to play with it , if you Have the another image can you post it ?
You command in both languages ​​because I provides more obviously my native language , but just help page if anyone has the same problem, greetings and thank you very much for the help, postscript is different in this version of image you have ?
Perdon por no haberte contestado antes, la verdad tuve que volver a la version del otro compañero porque ocupaba usar mucho el cel para el trabajo y no tuve mucho tiempo de jugar con el, si tienes la otra imagen podrias postearla porfavor0¿? para descargarla en la tarde y volver a hacer el test, tuve una revoltura de trabajo por eso no te conteste antes =).
Sry for not answer you, but i have too many work to do, i cant use this version cause have a lot of work and need my cellphone for it, i didnt have time to play with it, if you have the another image can you post it?
Te mando en los dos idiomas porque se me facilita mas obviamente mi idioma natal, pero igual ayuda a la pagina si alguien tiene el mismo problema, saludos y muchas gracias por la ayuda, posdata que es lo diferente en esta version de imagen que tienes?
0o
o0
eng plz
two idioms
It was write in two lenguajes, but both speak spanish, for that cause i wrote in spanish and englis, cause i preffer explain in my mother lenguaje but repply on english for other users, search on middle paragraph its wrote in english.
OP UPDATED.
If this gets enough attention I will upload a full twrp backup and with help of some moderator we might make a flashable zip of this Rom.
I am also testing/replacing the system apps with the G3 ones so "we" (sprint) users can
have this GSM unlocked rom just as the D950 (att) model.

Problema en whatsapp, trouble on whatsapp

Mi problema es que con las siguientes rom cyanogenmods: guatum, cyanhacker no recuerdo cual otra (perdón si los nombres no están bien escritos) el problema es que cuando alquien o yo llamo a alguien por whatsapp, la persona con la que estoy hablando me escucha pero esa persona no a mi. Yo quiero saber como solucionar eso o si hay alguna cyanogenmod 100% confiafle y estable en la que no suceda eso. Gracias!!! My problem is that rom cyanogenmods the following: guatum, cyanhacker not remember which other (sorry if names are not well written) the problem is that when someone or I call someone for whatsapp, the person I'm talking about listening but that person is not me. I want to know how to fix it or if any cyanogenmod 100% confiafle and stable in that it does not happen. Thank You !!!
wilo02 said:
Mi problema es que con las siguientes rom cyanogenmods: guatum, cyanhacker no recuerdo cual otra (perdón si los nombres no están bien escritos) el problema es que cuando alquien o yo llamo a alguien por whatsapp, la persona con la que estoy hablando me escucha pero esa persona no a mi. Yo quiero saber como solucionar eso o si hay alguna cyanogenmod 100% confiafle y estable en la que no suceda eso. Gracias!!! My problem is that rom cyanogenmods the following: guatum, cyanhacker not remember which other (sorry if names are not well written) the problem is that when someone or I call someone for whatsapp, the person I'm talking about listening but that person is not me. I want to know how to fix it or if any cyanogenmod 100% confiafle and stable in that it does not happen. Thank You !!!
Click to expand...
Click to collapse
There is a fix in most threads, you just need to change a few lines on the build.prop.
FreedFromDeath said:
There is a fix in most threads, you just need to change a few lines on the build.prop.
Click to expand...
Click to collapse
which build lines of pro ?, and if you know of a video that help me.
wilo02 said:
which build lines of pro ?, and if you know of a video that help me.
Click to expand...
Click to collapse
Use the search function. It's not that hard.
Use any build prop editor
http://forum.xda-developers.com/showthread.php?t=3064132

PLEASE HELP / AYUDA POR FAVOR! Lenovo k3 note Bricked

hola, intente hacer root con lenovo k3 manager 3.1 pero algo salio mal y mi smartphone esta bricked X´C, si lo intento encender queda la pantalla de "lenovo" y no inicia; cuando inicio en recovery ( vol. +/- y power) sale un pantalla azul en chino y no se que dice, se puede navegar al parecer pero no se que hacer, ayuda por-favor me llego hace apenas 2 días y ya no lo puedo usar :crying: :crying: :crying:
google traductor (sorry) :
hello, try lenovo root with 3.1 k3 manager but something went wrong and my smartphone is bricked X'c, if you try to start the screen "lenovo" is and does not start; when I start in recovery (vol. +/- and power) get a blue screen in Chinese and can not say, you can browse apparently but not to do, aid-for me came just two days ago and no longer I can use: crying:: crying:: crying:
blue screen: "subefotos.com/ver/?9b2e5b135aaea045c5e706c913ca07ebo.jpg"
If you used the app that was posted here, it means you will need to flash a stock rom using SPflash. Follow the steps provided in the vid. Be sure you download all the files and drivers in the description.
https://www.youtube.com/watch?v=TySRc_DkcFk&feature=youtu.be
Once fixed, follow the guide here to root your phone using adb. Faster and simpler :
http://www.techkadai.com/2015/11/root-lenovo-k3-note-and-custom-recovery.html
** credit to other forum members for providing the links. sorry, I can't recall who posted them.
Ya lo arregle !!! *.* ya había intentado con el sp flash tools, pero descubri que el menu de la blue screen en verdad no era mas que una especie de control del sistema, el pc no reconocia el dispositivo asi que empece a jugar con los controles en chino ( ya no podia cagarla mas cierto ? xD ) hasta que logre hacer que se conectara el dispositivo al pc y flash tools lo reconocio ! muchas gracias de todas formas ! .
google trad. :
I fixed it !!! *. * Had already tried with sp flash tools, but discovered that the menu of the blue screen really was nothing more than a kind of control system, the pc not recognize the device so I started to play with the controls in Chinese (and could not screw up more true? xD) until you can make the device connects to the PC and flash tools recognized him! thank you very much anyway: D!

For volume booster

I'm looking for a lift up the voice volume booster.For both speakers and headphones.Is it possible to make ?
je recherche la meme chose
Deben reemplazar los dos archivos con lo que subi a Google Drive, tiene que ir a SYSTEM/ETC y luego darles permisos, reinician y listo y tienen sonido Stereo y mas volumen.
https://drive.google.com/open?id=0B2y4ULuTMN4YOE8tNUItZ3lHTVU
is this working on 6.0.1?
The link is false, this don't work anymore if is androed 4.2 up.
Sent fro SomeFon
this
xprice16 said:
I'm looking for a lift up the voice volume booster.For both speakers and headphones.Is it possible to make ?
Click to expand...
Click to collapse
try this
https://play.google.com/store/apps/details?id=com.lifevibes.musicfx&hl=en
it , might work. is using this with moto g for like past 1 year.got my s6 edge + yesterday ,will be using this in it too

Question Help How to change Rom Stock Redmi Note 10S of Operadora Claro Colombia (Activate sim2)

Hi guys, I need help with my Redmi Note 10 purchased in Claro Colombia. This version has the SIM 2 locked.
I want to change the rom to the global version to enable the sim2 and remove all junk apps, but I don't know what software to use.
I would be very grateful if you could help me.
suarezfco said:
Hi guys, I need help with my Redmi Note 10 purchased in Claro Colombia. This version has the SIM 2 locked.
I want to change the rom to the global version to enable the sim2 and remove all junk apps, but I don't know what software to use.
I would be very grateful if you could help me.
Click to expand...
Click to collapse
Hola, I think first you must unlock your bootloader, and then, you can flash every rom that you like (always official MIUI from Mi) https://forum.xda-developers.com/t/firmware-redmi-note-10s-rosemary-auto-updated.4294971/
Authi said:
Hola, I think first you must unlock your bootloader, and then, you can flash every rom that you like (always official MIUI from Mi) https://forum.xda-developers.com/t/firmware-redmi-note-10s-rosemary-auto-updated.4294971/
Click to expand...
Click to collapse
Authi thanks for your reply
and for sharing your knowledge with others.
I used xiaomitools v2 changed the rom for me, but the logo still appears and did not enable the sim2.
I'm going to do what you tell me to unlock the bootloader and flash the rom to see if I can remove the logo and enable sim 2.
suarezfco said:
Hi guys, I need help with my Redmi Note 10 purchased in Claro Colombia. This version has the SIM 2 locked.
I want to change the rom to the global version to enable the sim2 and remove all junk apps, but I don't know what software to use.
I would be very grateful if you could help me.
Click to expand...
Click to collapse
Hi,
If you want to remove all the junk apps, then i would recommend using this tool
https://github.com/Szaki/XiaomiADBFastbootTools
Its a very simple and useful tool
All the instructions are given there as well.
For the list of bloatware, you can refer these websites:
https://rootmygalaxy.net/xiaomi-bloatware-list-remove-safely-from-miui/
https://selivan.github.io/2020/02/25/removing-bloatware-from-xiaomi-miui-android.html
https://technastic.com/xiaomi-bloatware-list-miui/
suarezfco said:
Authi thanks for your reply
and for sharing your knowledge with others.
I used xiaomitools v2 changed the rom for me, but the logo still appears and did not enable the sim2.
I'm going to do what you tell me to unlock the bootloader and flash the rom to see if I can remove the logo and enable sim 2.
Click to expand...
Click to collapse
@suarezfco para desbloquear el bootloader te recomiendo usar la herramienta MiFlashUnlock, recomendado al 100%, lo único con lo que podrías tener problemas son los drivers, comienza con este video:
me comentas como vas
dajohlopez said:
@suarezfco para desbloquear el bootloader te recomiendo usar la herramienta MiFlashUnlock, recomendado al 100%, lo único con lo que podrías tener problemas son los drivers, comienza con este video:
me comentas como vas
Click to expand...
Click to collapse
@dajohlopez saludos, gracias por responder, el bootloader lo realice como lo indicas con miflashunlock, pero para el proceso de cambio de rom fastboot utilicé xiaomitools v2 y me dio un error, ahora se queda pegado en el logo de redmi y de ahí no pasa
suarezfco said:
@dajohlopez saludos, gracias por responder, el bootloader lo realice como lo indicas con miflashunlock, pero para el proceso de cambio de rom fastboot utilicé xiaomitools v2 y me dio un error, ahora se queda pegado en el logo de redmi y de ahí no pasa
Click to expand...
Click to collapse
Hola, si te bajas una rom que sea compatible con fastboot, NO necesitas para nada ninguna aplicación adicional, ni xiaomitools ni nada. Descomprimes el archivo .tgz (con Winrar por ejemplo) en una carpeta lo mas cercana a la raiz de C:\ (yo uso C:\Temp) Acto seguido, allí dentro, encontrarás un archivo llamado "flash_all.bat". Simplemente, verifica que tu pc reconozca el móvil, si conseguiste desbloquear el bootloader, ya deberías reconocerlo sin problemas, entonces clica ese archivo, se abrirá una ventana de Ms-Dos, y con un poco de paciencia, deja trabajar el archivo por lotes, y en unos minutos, tendrás flaseado tu telf. sin problemas. No te deseperes, si pasa algún minuto sin que parezca que no avanza, déjalo trabajar, y si todo va bien, lo tendrás resuelto.
Saludos
--------------------------------------------------
Hello, if you download a ROM that is compatible with FastBoot, you do not need any additional application, or Xiaomitools or anything else. Unzip the .tgz file (with WinRAR for example) in a folder as close to the root of c: \ (I use c: \ temp) Then, there inside, you will find a file called "flash_all.bat". Simply, check that your PC recognizes the mobile, if you managed to unlock the bootloader, you should already recognize it without problems, then click on that file, an MS-DOS window will open, and with a little patience, let the batch file to work in a few minutes, you will be flaky of your tel. No problem. Do not desperate, if you spend some minute without it, it seems that it does not advance, let it work, and if everything goes well, you will have it resolved.
Greetings

Categories

Resources