Hi folks!
just wanted to share this little zip. I personally made it for S5 neo, but it will probably work on every device with Exynos7580 chip (assuming the param-partition is located in /dev/block/mmcblk0p9).
I adopted it from here.
so credits go out to @amtra.
If you flash the zip "as-is", your new bootlogo will look like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(S5neo-logo I adapted from the box)
Of course you can use your own design, just replace the logo.jpg in the zip with your very own logo.jpg
-DISCLAMER-
Dont blame me, if sth does not work as expected after flashing this zip.
Under certain circumstances this zip could potentially brick your phone.
So don't be a lazy ass and back-up your phone before flashing
How to use:
- reboot to recovery ..
- flash the zip ..
- reboot to system ..
- done.
Wiping is not necessary, because it only has effect on the bootlogo partition.
Any questions? Then post here, and I will try my best to help out.
Enjoy
drei.liter.milch said:
Hi folks!
just wanted to share this little zip. I personally made it for S5 neo, but it will probably work on every device with Exynos7580 chip (assuming the param-partition is located in /dev/block/mmcblk0p9).
I adopted it from here.
so credits go out to @amtra.
If you flash the zip "as-is", your new bootlogo will look like this:
(S5neo-logo I adapted from the box)
Of course you can use your own design, just replace the logo.jpg in the zip with your very own logo.jpg
-DISCLAMER-
Dont blame me, if sth does not work as expected after flashing this zip.
Under certain circumstances this zip could potentially brick your phone.
So don't be a lazy ass and back-up your phone before flashing
How to use:
- reboot to recovery ..
- flash the zip ..
- reboot to system ..
- done.
Wiping is not necessary, because it only has effect on the bootlogo partition.
Any questions? Then post here, and I will try my best to help out.
Enjoy
Click to expand...
Click to collapse
Thx,
for the nice black logo of S5Neo.....
Can you make one white the same S5 Neo :fingers-crossed:
rush9935 said:
Thx,
for the nice black logo of S5Neo.....
Can you make one white the same S5 Neo :fingers-crossed:
Click to expand...
Click to collapse
you're welcome!
here are some other logo variants i made.. is this what you thought about..?
drei.liter.milch said:
you're welcome!
here are some other logo variants i made.. is this what you thought about..?
and perhaps one mod could move this thread to the NEO-section please?
Click to expand...
Click to collapse
Great thx.. its working #1:good:
How to do it? Its not working for me i tried
Invalid zip file format!
Error installing zip file '/sdcard/Exynos7580)bootlogo-changer.zip'
drei.liter.milch said:
Hi folks!
just wanted to share this little zip. I personally made it for S5 neo, but it will probably work on every device with Exynos7580 chip (assuming the param-partition is located in /dev/block/mmcblk0p9).
I adopted it from here.
so credits go out to @amtra.
If you flash the zip "as-is", your new bootlogo will look like this:
(S5neo-logo I adapted from the box)
Of course you can use your own design, just replace the logo.jpg in the zip with your very own logo.jpg
-DISCLAMER-
Dont blame me, if sth does not work as expected after flashing this zip.
Under certain circumstances this zip could potentially brick your phone.
So don't be a lazy ass and back-up your phone before flashing
How to use:
- reboot to recovery ..
- flash the zip ..
- reboot to system ..
- done.
Wiping is not necessary, because it only has effect on the bootlogo partition.
Any questions? Then post here, and I will try my best to help out.
Enjoy
Click to expand...
Click to collapse
Im just tagging you so u can read and answer me
KomitaMKD said:
Im just tagging you so u can read and answer me
Click to expand...
Click to collapse
hm, never experienced this..
are you using latest official twrp recovery from here? -> https://dl.twrp.me/s5neolte/
perhaps try it with v-3.1.1-2.. that was at least the version which i used. unfortunately i'm not owning s5neo anymore.
have you disabled zip sig verification in twrp? do you have g903f or g903w?
Also you can attach your recovery log after flashing..
or try to resign the zip..
drei.liter.milch said:
hm, never experienced this..
are you using latest official twrp recovery from here? -> https://dl.twrp.me/s5neolte/
perhaps try it with v-3.1.1-2.. that was at least the version which i used. unfortunately i'm not owning s5neo anymore.
have you disabled zip sig verification in twrp? do you have g903f or g903w?
Also you can attach your recovery log after flashing..
or try to resign the zip..
Click to expand...
Click to collapse
That's the version i use too. Zip sig is disabled. I dont know how to attach log or resign zip. My device is g903f and i use custom rom zapryanov for nougat since there is only W version for s5 neo and in settings its shown as g903w idk if that matter since my device is still g903f
Works well on my Nougat S5 Neo G903F! Thx
---------- Post added at 09:37 PM ---------- Previous post was at 09:13 PM ----------
Can anyone share STOCK logo.jpg ?
Here a new Logo
Can you change the battery logo by instead changing the update binary from logo.jpg to lpg.jpg
can somebody help me my phone wont turn on after i change the boot logo how can i solve this someone help me
Kincofgg234 said:
can somebody help me my phone wont turn on after i change the boot logo how can i solve this someone help me
Click to expand...
Click to collapse
Does it boot to download mode and recovery or it doesn't at all?
Barebonet said:
Does it boot to download mode and recovery or it doesn't at all?
Click to expand...
Click to collapse
yeah thats my problem can u help me to fix this i really need my phone
btw this is my user too i use this cause my kincoff not working anymore so im using this one
need a help tia
lavander24 said:
yeah thats my problem can u help me to fix this i really need my phone
btw this is my user too i use this cause my kincoff not working anymore so im using this one
need a help tia
Click to expand...
Click to collapse
So it boot or not? XD
Barebonet said:
So it boot or not? XD
Click to expand...
Click to collapse
it booted in download mode but in recovery mode it wont boot
lavander24 said:
it booted in download mode but in recovery mode it wont boot
Click to expand...
Click to collapse
Flash stock. Just a soft brick. I think it is all you can do as far as I remember but not sure. If u wanna make sure the in Google how to get rid of soft brick and there will be something
Barebonet said:
Flash stock. Just a soft brick. I think it is all you can do as far as I remember but not sure. If u wanna make sure the in Google how to get rid of soft brick and there will be something
Click to expand...
Click to collapse
already did that i flash stock rom many many times but its the problem still there
lavander24 said:
already did that i flash stock rom many many times but its the problem still there
Click to expand...
Click to collapse
Tried to flash and do a factory reset? Or still only download mode?
Here a New Logo
Related
First I have to give credit where credit is due for the original work.. I just ported it into the NS4G version.
I have to thank djmcnz for providing an awesome guide on how to do this mod and sharing it with everyone. That is what development is all about... Sharing...
Anyways onto the goods.....
REBOOT, REBOOT TO RECOVERY & BOOTLOADER EXTENDED POWER MENU FOR JELLYBEAN/NS4G
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Aside from the obvious Reboot & Reboot to Recovery, you LONG PRESS on Recovery and it will boot into your bootloader.
Note: This is based on the most current version of JellyBean for the NS4G (version 7)
Download v7 : Extended Power Menu v7 (Flash in CWM/TWRP)
Previous Versions:
Download v6a : Reboot-Recovery-Bootloader-JellyBean-Mod (Flash in CWM/TWRP) Wiping not required
w00t!
Sweet! I was hoping something like this would be released soon, thanks!
Wow flashing it right now! Thanks! :good:
Phone just loops
Paul627g said:
First I have to give credit where credit is due for the original work.. I just ported it into the NS4G version.
I have to thank djmcnz for providing an awesome guide on how to do this mod and sharing it with everyone. That is what development is all about... Sharing...
Anyways onto the goods.....
REBOOT, REBOOT TO RECOVERY & BOOTLOADER EXTENDED POWER MENU FOR JELLYBEAN/NS4G
Aside from the obvious Reboot & Reboot to Recovery, you LONG PRESS on Recovery and it will boot into your bootloader.
Note: This is based on the most current version of JellyBean for the NS4G (version 6a)
Download : Reboot-Recovery-Bootloader-JellyBean-Mod (Flash in CWM/TWRP) Wiping not required
Click to expand...
Click to collapse
Downloaded and flashed over the correct rom. After Boot and unlocking phone it will loop back to the boot animation after about 10 seconds
kangta05 said:
Downloaded and flashed over the correct rom. After Boot and unlocking phone it will loop back to the boot animation after about 10 seconds
Click to expand...
Click to collapse
Hello,
Sounds like you could have had a bad flash or the possibility you weren't running version 6a.
Hopefully you made a nandroid backup before you flashed and you can restore that and try flashing the mod again.
This is the first reported fail after about 200 downloads of this modification.
Good luck, report back.
Paul
Retry
Paul627g said:
Hello,
Sounds like you could have had a bad flash or the possibility you weren't running version 6a.
Hopefully you made a nandroid backup before you flashed and you can restore that and try flashing the mod again.
This is the first reported fail after about 200 downloads of this modification.
Good luck, report back.
Paul
Click to expand...
Click to collapse
LOL i was stupid and didnt back up the rom but it wasnt much on there. But I forgot to say thank you in the first place. I'm about to backup the rom and re-try, will report back later
Thank you very much for all your work.Looks awesome.
Works Great
Paul627g said:
Hello,
Sounds like you could have had a bad flash or the possibility you weren't running version 6a.
Hopefully you made a nandroid backup before you flashed and you can restore that and try flashing the mod again.
This is the first reported fail after about 200 downloads of this modification.
Good luck, report back.
Paul
Click to expand...
Click to collapse
Reported back , reflashed the rom and then redownloaded and flashed mod, it works great. Thank you for your great work
Any version for the Ns3g?
Sent from my Full Android on Crespo using xda app-developers app
it's a wish. If you could add screenshot( I use this alot) and torch(convenient). It would be incredible. Anyone else?
n2d551 said:
it's a wish. If you could add screenshot( I use this alot) and torch(convenient). It would be incredible. Anyone else?
Click to expand...
Click to collapse
Screenshot can still be easily achieved just using the standard Power & Volume Down option. I know many devs throw in that screenshot mod to the reboot menu but to be it seems a little pointless. I will look into seeing what I can do, no promises..
Torch.. That I think is a ways off still.
I can't flash it.. it saying its for nexus 4g.
Sent from my Crespo using Jelly Bean
sidnoit22 said:
I can't flash it.. it saying its for nexus 4g.
Sent from my Crespo using Jelly Bean
Click to expand...
Click to collapse
Similarly, can't flash it
---------- Post added at 11:42 AM ---------- Previous post was at 11:18 AM ----------
vadbess said:
Similarly, can't flash it
Click to expand...
Click to collapse
HAAA i cracked it, and install to crecpo
I opened file updater-script (in zip) and find ro.product.device - changed parameter from "crespo4g" to "crespo"
Does this work for gsm version?
danshuynh said:
Does this work for gsm version?
Click to expand...
Click to collapse
read post 14
I can confirm this works for nexus s! But after rebooting the haptic feedback for the touch buttons are really weak!
But what's weird is that I keep having to reinstall the xda app after every reboot, is the mod the cause of this?
danshuynh said:
But what's weird is that I keep having to reinstall the xda app after every reboot, is the mod the cause of this?
Click to expand...
Click to collapse
I don't see why this mod would have anything to do with causing the XDA app to not stick.
danshuynh said:
I can confirm this works for nexus s! But after rebooting the haptic feedback for the touch buttons are really weak!
Click to expand...
Click to collapse
Yep should work on the Nexus S after redoing the updater script. Haptic feedback was not affected or changed for this so it really should not be affecting it. In no way was files for haptic feedback even touched.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
... Oppo Find 5 Jelly Bean Rom ported on the Nexus S !
This is Jelly Bean 4.1.1 !
My Nexus S is died, I do not even know if this ROM boots. I am in no way responsible for any damage / brick that could occasioning this ROM. If you do not know what you do, this ROM is not for you. Do a BACKUP of your current Rom before try this.
WORKING
Boot (?)
Tell me
NOT WORKING
Tell me
INSTALLATION
Download the ROM
Reboot to recovery
Do nandroid backup
Wipe ALL
Install the [PORT]Oppo_For_Nexus_S.zip
Reboot
Enjoy !!!
Please, if the does not boot, make a logcat and send me it. I will try to fix errors.....
Don't forget to "Thanks" or to donate to me...... Thanks !
reserved
CHANGELOG
Version 0.1 [06/11/2013]
Initial release
Nice...Keep it up :good:
xxxMADxxx said:
Nice...Keep it up :good:
Click to expand...
Click to collapse
Thanks Can you test it please ?
Downloading.... Can't wait to try it out, it's really big isn't it
TechMitchell said:
Downloading.... Can't wait to try it out, it's really big isn't it
Click to expand...
Click to collapse
I don't know if it will boot. Just wait about 15 minute before think that this will not boot.
If it not boot please give me a logcat.
adb logcat
thanks
OK
GalaxyUser said:
I don't know if it will boot. Just wait about 15 minute before think that this will not boot.
If it not boot please give me a logcat.
adb logcat
thanks
Click to expand...
Click to collapse
No problem, learning to develop myself, personally starting on apps rather than ROMs, but maybe soon
Bad installaton
TechMitchell said:
No problem, learning to develop myself, personally starting on apps rather than ROMs, but maybe soon
Click to expand...
Click to collapse
Tried to flash it and got bad installation?
TechMitchell said:
Tried to flash it and got bad installation?
Click to expand...
Click to collapse
Just download this:
https://docs.google.com/file/d/0B5LJgOGBjYOBWEFpQ2luLWRRRFk/edit?usp=sharing
There is a META-INF folder in the ZIP.
Replace the meta-inf's ROM folder by this new META-INF folder in the zip rom.
Try to flash it again and tell me
I updated OP
Download the ROM
Download zip this
Open [PORT][PORT]Oppo_For_Nexus_S.zip with Winrar
Copy META-INF folder from META-INF.zip to [PORT]Oppo_For_Nexus_S.zip
Reboot to recovery
Do nandroid backup
Wipe ALL
Install the [PORT]Oppo_For_Nexus_S.zip
Reboot
Enjoy !!!
Thanks
GalaxyUser said:
Just download this:
https://docs.google.com/file/d/0B5LJgOGBjYOBWEFpQ2luLWRRRFk/edit?usp=sharing
There is a META-INF folder in the ZIP.
Replace the meta-inf's ROM folder by this new META-INF folder in the zip rom.
Try to flash it again and tell me
I updated OP
Download the ROM
Download zip this
Open [PORT][PORT]Oppo_For_Nexus_S.zip with Winrar
Copy META-INF folder from META-INF.zip to [PORT]Oppo_For_Nexus_S.zip
Reboot to recovery
Do nandroid backup
Wipe ALL
Install the [PORT]Oppo_For_Nexus_S.zip
Reboot
Enjoy !!!
Thanks
Click to expand...
Click to collapse
Never mind
TechMitchell said:
You need to grant me permission to your drive, check your email, Thanks.
Click to expand...
Click to collapse
It's okay, sorry
GalaxyUser said:
It's okay, sorry
Click to expand...
Click to collapse
I performed the updated instructions in the OP and it is still giving me a (bad) error.
TechMitchell said:
I performed the updated instructions in the OP and it is still giving me a (bad) error.
Click to expand...
Click to collapse
Hum... Can ou try with this META-INF folder please: https://docs.google.com/file/d/0B5LJgOGBjYOBOFBmN2hBSjN5WHM/edit?usp=sharing
GalaxyUser said:
Hum... Can ou try with this META-INF folder please: https://docs.google.com/file/d/0B5LJgOGBjYOBOFBmN2hBSjN5WHM/edit?usp=sharing
Click to expand...
Click to collapse
Same error
TechMitchell said:
Same error
Click to expand...
Click to collapse
Can you take a photo of the error and post it please ?
Have you rebooted the recovery between each flash ROMs?
Here it is, and yes I've rebooted recovery every time as I cannot enable USB mass storage in recovery.
Sent from my GT-N8000 using Tapatalk HD
TechMitchell said:
Here it is, and yes I've rebooted recovery every time as I cannot enable USB mass storage in recovery.
Sent from my GT-N8000 using Tapatalk HD
Click to expand...
Click to collapse
Can you try this this please...
https://docs.google.com/file/d/0B5LJgOGBjYOBQUtvQ2Z4bE9tX3c/edit?usp=sharing
Sorry for that.
And ---------- Please download the ROM from another Browser, i think your download was bad
Perhaps someone else can test to see if it's the download that was wrong ?
Thanks
GalaxyUser said:
Can you try this this please...
https://docs.google.com/file/d/0B5LJgOGBjYOBQUtvQ2Z4bE9tX3c/edit?usp=sharing
Sorry for that.
And ---------- Please download the ROM from another Browser, i think your download was bad
Perhaps someone else can test to see if it's the download that was wrong ?
Thanks
Click to expand...
Click to collapse
Same error again, but that time it appeared much more quickly than the previous times. And as a precaution, do you want me to replace the META file or just copy over it, because i am using linux and i copy it over and I think it adds to the META.
TechMitchell said:
Same error again, but that time it appeared much more quickly than the previous times. And as a precaution, do you want me to replace the META file or just copy over it, because i am using linux and i copy it over and I think it adds to the META.
Click to expand...
Click to collapse
Yes replace it: delete META-INF folder from the rom ZIP and add the one from META-INF-NEW.ZIP to rom ZIP.
But i think the download was BAD and you will need to download again the ROM
This rom will get your phone back up and running!!
!!WARNING!!
I'm not responsible or liable for anything that may happen to your phone if you download and install this firmware!
This is a WORK IN PROGRESS!!!
Please feel free to help me make this rom better!
P.S.
This is not a STOCK ROM I was lucky enough to build one from parts and pieces of other stock firmware's that are available for download. Only use this rom if you turned your SM-S920L into a $200.00 bookmark!. As of right now there is no Stock firmware for this device and lots of other straight talk phones also.
Get It Here!!
Little Different ROM???
Lame. I wouldn't donate for a stock rom even if it did exist.
***EDIT***
Ok, so I see you removed the donate link, but the google drive link is not currently working. Is this a custom rom? If so, I don't think I'd be willing to risk my phone without a working custom recovery to backup and restore my phone should something go wrong.
So, I am guessing this is the stock ROM?
what is is s920l ?
juancapo9999 said:
what is is s920l ?
Click to expand...
Click to collapse
Samsung Galaxy Grand Prime
...
Just wondering how to install without custom recovery?
---------- Post added at 11:16 PM ---------- Previous post was at 11:04 PM ----------
Medfordite said:
So, I am guessing this is the stock ROM?
Click to expand...
Click to collapse
No its not stock it says so in the op post it is in fact a custom ROM
---------- Post added at 11:37 PM ---------- Previous post was at 11:16 PM ----------
Anyone have any news on recovery and custom ROM for this phone
I'm assuming this needs to be flashed with Odin.
any screenshot?
Pictures of ROM
juancapo9999 said:
any screenshot?
Click to expand...
Click to collapse
I Bricked my SM-S920L after rooting then loading my usual apps, but when installing XPOSED FRAMEWORK after the reboot, no sound and locked at the Straight Talk (Blue) loading screen. Trying to wipe cache or doing a factory reset was usless.///..//>>?? It was a goner with no help anywhere!! But was always able to get into download mode! If this happens to you, then you might find my Frankenstein ROM useful. I was able to make calls but no WiFi or LTE or 3G. So use this ROM as last resort only!!! And yrs Use whatever ODIN version you like...
P.S. if your having problems downloading from Google Drive, I will place it elsewhere. Let me know. Also it took me a long time to get this ROM put together so a thanks would be greatly appreciated!
Good luck and happy ROMing!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
brekstar said:
I Bricked my SM-S920L after rooting then loading my usual apps, but when installing XPOSED FRAMEWORK after the reboot, no sound and locked at the Straight Talk (Blue) loading screen. Trying to wipe cache or doing a factory reset was usless.///..//>>?? It was a goner with no help anywhere!! But was always able to get into download mode! If this happens to you, then you might find my Frankenstein ROM useful. I was able to make calls but no WiFi or LTE or 3G. So use this ROM as last resort only!!! And yrs Use whatever ODIN version you like...
P.S. if your having problems downloading from Google Drive, I will place it elsewhere. Let me know. Also it took me a long time to get this ROM put together so a thanks would be greatly appreciated!
Good luck and happy ROMing!
Click to expand...
Click to collapse
hey your image not wiew, plis post new image
Pics Here
juancapo9999 said:
hey your image not wiew, plis post new image
Click to expand...
Click to collapse
Pic's SM-S920L
Pic's here!
juancapo9999 said:
hey your image not wiew, plis post new image
Click to expand...
Click to collapse
https://drive.google.com/open?id=0Bz0FuWF9yY7LVUtYd2QtWmZNcjg
brekstar said:
Pic's SM-S920L
Click to expand...
Click to collapse
hey archive blocked
---------- Post added at 03:24 AM ---------- Previous post was at 03:22 AM ----------
is stock rom
Hey Brekstar, are you by chance still working on this? Do you have a way of extracting the stock Rom?
Koenji said:
Hey Brekstar, are you by chance still working on this? Do you have a way of extracting the stock Rom?
Click to expand...
Click to collapse
Get Chainfires Flashfire app and do a full RAW backup. Compress it any which way you like and upload it. From there I can try to compile a bootable rom for us (I'm desperate and now have some knowledge to do so...as close to factory as possible, please!
Sent from my HTCD200LVWPP using Tapatalk
adrwill2000 said:
Get Chainfires Flashfire app and do a full RAW backup. Compress it any which way you like and upload it. From there I can try to compile a bootable rom for us (I'm desperate and now have some knowledge to do so...as close to factory as possible, please!
Click to expand...
Click to collapse
I would if i had the knowledge to do it. Just looked into it and seems a little bit advanced for me, sorry.
hello try to this post :
http://forum.xda-developers.com/gra...t/cm-13-android-6-0-1-grand-prime-sm-t3291892
this post help you to install custom rom on grand prime sm-g530h and other . . .
adrwill2000 said:
Get Chainfires Flashfire app and do a full RAW backup. Compress it any which way you like and upload it. From there I can try to compile a bootable rom for us (I'm desperate and now have some knowledge to do so...as close to factory as possible, please!
Sent from my HTCD200LVWPP using Tapatalk
Click to expand...
Click to collapse
I can do this if you are still wanting the RAW backup.
There are tons of things to backup according to the app, do you know which ones you want?
I will post it online once I get the backup made.
Medfordite said:
I can do this if you are still wanting the RAW backup.
There are tons of things to backup according to the app, do you know which ones you want?
I will post it online once I get the backup made.
Click to expand...
Click to collapse
The partitions needed would more than likely be from Normal Backup type, but he's asking for full or Force Raw Backup, in case of a wiped partition that would render a bootup impossible
Run a normal backup for now, just to get the OP's backup replaced so that a last resort ROM could work as daily driver :fingers-crossed:
Is this still being worked on?
Modified PARAM partition, in which the bootlogo and other images exist. It simply acts as a image cache for bootloader.
I've been doing this mod for several samsung phones over the years and now when I got the A3 I wanted to try it out again.
I also attached a zip with the original logo since this partition is not included in the stock rom packages from samsung.
Here's a View attachment SM-A310F-PARAM.tar.zip in case something goes wrong when you try to make your own logo. You will probably only be able to reach download mode.
Or if you just want to get back to stock boot logo.
Unzip and flash the SM-A310F-PARAM.tar.md5 with Odin.
SM-A310F ONLYTested and working.
Flash in TWRP, reboot, and see the change.
View attachment 3977779 Google
Tried an easier method from here.
Thanks to @contrinsan for finding out it works, and thanks to @moluntic for the awesome script and original thread!
MORE HERE -> BOOTLOGO COLLECTION - PART II
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Ambient White
City
N
Stripes
Lineage OS
Nintendo
HollowRed
Inverted
tys0n said:
Modified PARAM partition, in which the bootlogo and other images exist. It simply acts as a image cache for bootloader.
SM-A310F ONLYTested and working.
Flash in TWRP, reboot, and see the change.
View attachment 3977779
I've been doing this mod for several samsung phones over the years and now when I got the A3 I wanted to try it out again.
I also attached a zip with the original logo since this partition is not included in the stock rom packages from samsung.
Click to expand...
Click to collapse
I have a problem...
I took the Googlemod and created my own logo and inserted into the bin file. Now I have only a black image and the phone does not start anymore.
A stock-stream flashing does not improve.
I also can not get into the recovery, only in the download mode.
Can someone help me?
Latroe said:
I have a problem...
I took the Googlemod and created my own logo and inserted into the bin file. Now I have only a black image and the phone does not start anymore.
A stock-stream flashing does not improve.
I also can not get into the recovery, only in the download mode.
Can someone help me?
Click to expand...
Click to collapse
Here, I've made a tar.md5. Unzip and flash as AP in odin.
tys0n said:
Here, I've made a tar.md5. Unzip and flash as AP in odin.
Click to expand...
Click to collapse
The file does not work ....
Odin remains attached to File Analysis.
Latroe said:
The file does not work ....
Odin remains attached to File Analysis.
Click to expand...
Click to collapse
That's strange.. but it does pass the md5 check?
What odin version do you use?
Did you double check the file you made, so that it wasn't bigger than original param?
I am using ODIN 3.12.3!
Do I have to load only the md5 file or the logo file in the same directory?
Latroe said:
I am using ODIN 3.12.3!
Do I have to load only the md5 file or the logo file in the same directory?
Click to expand...
Click to collapse
Only md5 file. It contains the original param.bin.
No other files needed because the logos is already inside param.
Try with Odin 3.10.7
This can not be the md5 file you uploaded is only 231 bytes big!
Please check your file please
Latroe said:
This can not be the md5 file you uploaded is only 231 bytes big!
Please check your file please
Click to expand...
Click to collapse
LOL you're right!
I didn't check the filesize after md5 command so something must have gone wrong with that command
View attachment SM-A310F-param.tar.zip Here's a new one but without md5
1000 times Thank you, it goes again!
Updated with another logo.
tys0n said:
Modified PARAM partition, in which the bootlogo and other images exist. It simply acts as a image cache for bootloader.
SM-A310F ONLY
Tested and working.
Flash in TWRP, reboot, and see the change.
I've been doing this mod for several samsung phones over the years and now when I got the A3 I wanted to try it out again.
I also attached a zip with the original logo since this partition is not included in the stock rom packages from samsung.
Tried an easier method from here.
Thanks to @contrinsan for finding out it works, and thanks to @moluntic for the awesome script and original thread!
Click to expand...
Click to collapse
Can you make one for A5 2015
huseein A5 said:
Can you make one for A5 2015
Click to expand...
Click to collapse
Hi. You could try to send a message to @akil777
I think he edited the update binary to work for A500
tys0n said:
Hi. You could try to send a message to @akil777
I think he edited the update binary to work for A500
Click to expand...
Click to collapse
I did it, but I don't have the original splash be careful.
huseein A5 said:
Can you make one for A5 2015
Click to expand...
Click to collapse
Here is the flashable ZIP, It came from a510. Beware when flashing. I am EXTREMELY NOT responsible if anything which goes wrong, I request you to make a backup. This was tested and worked on a500h. do see scripts if you want to know how it works. Always make a backup. Copy "/dev/block/platform/7824900.sdhci/by-name/param" to your phone and on your pc (important) then you may flash the ZIP.
View attachment modified.zip
akil777 said:
Here is the flashable ZIP, It came from a510. Beware when flashing. I am EXTREMELY NOT responsible if anything which goes wrong, I request you to make a backup. This was tested and worked on a500h. do see scripts if you want to know how it works. Always make a backup. Copy "/dev/block/platform/7824900.sdhci/by-name/param" to your phone and on your pc (important) then you may flash the ZIP.
Click to expand...
Click to collapse
But how to restore it
---------- Post added at 02:44 PM ---------- Previous post was at 02:40 PM ----------
akil777 said:
Here is the flashable ZIP, It came from a510. Beware when flashing. I am EXTREMELY NOT responsible if anything which goes wrong, I request you to make a backup. This was tested and worked on a500h. do see scripts if you want to know how it works. Always make a backup. Copy "/dev/block/platform/7824900.sdhci/by-name/param" to your phone and on your pc (important) then you may flash the ZIP.
Click to expand...
Click to collapse
And it's says copy failed
huseein A5 said:
But how to restore it
---------- Post added at 02:44 PM ---------- Previous post was at 02:40 PM ----------
And it's says copy failed
Click to expand...
Click to collapse
Are you able to boot your phone??
---------- Post added at 02:53 PM ---------- Previous post was at 02:51 PM ----------
huseein A5 said:
But how to restore it
---------- Post added at 02:44 PM ---------- Previous post was at 02:40 PM ----------
Click to expand...
Click to collapse
If you made a backup param, you can simply restore it by copying it from the place where you backed it up then place it to /dev/block/.../by-name/param
Make a a3(2016) boot logo, white colour version.
Make a a3(2016) boot logo, white colour version. Please?
and thank you!
that would be awsome!
Kell5719 said:
Make a a3(2016) boot logo, white colour version. Please?
and thank you!
that would be awsome!
Click to expand...
Click to collapse
White / inverted added.
Also added Lineage OS bootlogo now when we got a little taste of it
Thanks Bro,
Successfully flashed the Stock Boot image for A310F using your method & it worked for me. Thanks
Is there any way to get xposed now?
Sent from my Mi A2 using Tapatalk
I just tried to install xposed via magisk and softbricked ph. Doh. API 27.
I have xposed working by deodex rom
Linky?
kradNZ said:
I just tried to install xposed via magisk and softbricked ph. Doh. API 27.
Click to expand...
Click to collapse
Me too stuck in boot loop and now resolving it
Rushikesh googlelar said:
Me too stuck in boot loop and now resolving it
Click to expand...
Click to collapse
I ended up resetting the device via fastboot. Bit annoying but its back up and running without too much drama. Apparently there is a special xposed recovery mode you can enable on boot but I couldn't get it to work.
any suggestions on how to make it boot with Magisk xposed for SDK 27?
I also got stuck on animation and had to wipe data in order to be able to boot up device.
something about this??
janneriiki said:
any suggestions on how to make it boot with Magisk xposed for SDK 27?
I also got stuck on animation and had to wipe data in order to be able to boot up device.
Click to expand...
Click to collapse
I assume it has to do with the device security checks. It is why the current TWRP does not work all that well (can boot into twrp but causes bootloop once you exit). Implementing some workarounds shouldn't be too hard. It will just take a little time.
You should not have to wipe data though. You can follow the directions for using unofficial twrp in this link and follow the Guide:
Download the TWRP image,
fastboot flash boot_b TWRP-3.2.3-jasmine-20180804.img
fastboot set_active b
then reboot and hold Volume Up to boot, you will enter TWRP
once in twrp
follow the How to Uninstall Magisk Module Using TWRP Recovery and remove xposed.
then re root the device using the Root Xiaomi Mi A2 Using Magisk article.
(basically overwrite the twrp image you put on so you don't get a bootloop from that)
if you havent already make sure to run the
fastboot set_active a
Kaboom! it should boot back up rooted with all your settings and tweaks in tote.
I have installed a few modules that put my A2 into a bootloop. I hate having to set it up every time
I have said it already, just deodex rom, xposed will working. You can use SuperR's Kitchen to accomplish.
vavill said:
I have said it already, just deodex rom, xposed will working. You can use SuperR's Kitchen to accomplish.
Click to expand...
Click to collapse
Then we will wait for a "guide for noobs" :silly: hehe thanks for the info!
vavill said:
I have said it already, just deodex rom, xposed will working. You can use SuperR's Kitchen to accomplish.
Click to expand...
Click to collapse
I have been working on a deoex, Upon compiling the img file in superR kitchen I get the following
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The log says
Any ideas on how to get this to work? I would love to learn how this all works and also be able to install xposed.
It does this no matter which partition option I use. Although the adb shell does not work, I also tried allocating as much as 4 gb (4294967296 bytes) with no difference.
---------- Post added at 08:27 PM ---------- Previous post was at 07:31 PM ----------
Daha3ker said:
I have been working on a deoex, Upon compiling the img file in superR kitchen I get the following
The log says
Any ideas on how to get this to work? I would love to learn how this all works and also be able to install xposed.
It does this no matter which partition option I use. Although the adb shell does not work, I also tried allocating as much as 4 gb (4294967296 bytes) with no difference.
Click to expand...
Click to collapse
Edit: I actually got it to build correctly, although it ends in a bootloop when flashed. Any ideas?
Daha3ker said:
I have been working on a deoex, Upon compiling the img file in superR kitchen I get the following
The log says
Any ideas on how to get this to work? I would love to learn how this all works and also be able to install xposed.
It does this no matter which partition option I use. Although the adb shell does not work, I also tried allocating as much as 4 gb (4294967296 bytes) with no difference.
---------- Post added at 08:27 PM ---------- Previous post was at 07:31 PM ----------
Edit: I actually got it to build correctly, although it ends in a bootloop when flashed. Any ideas?
Click to expand...
Click to collapse
Just pull priv-app app framework folder to phone and replace via TWRP, delete those three folder first.
kxzxxx said:
Just pull priv-app app framework folder to phone and replace via TWRP, delete those three folder first.
Click to expand...
Click to collapse
OOH! I am getting close, I can feel it! The display is dimming correctly on boot when I do that. Although it still will not finish booting. :/ Any Ideas?
Any advance about this? I miss xposed so much...
bixirulo said:
Any advance about this? I miss xposed so much...
Click to expand...
Click to collapse
Sorry, I was preoccupied with some other stuff. I tried a custom rom which is deodexed. it runs pretty well. it is the arrow gsi rom. Unfortunately I tried deodexing for another 2-3 days to no avail. I am not sure what I was doing wrong. if anyone has knowledge of how to do this, please let me know. I would love to learn.
vavill said:
I have said it already, just deodex rom, xposed will working. You can use SuperR's Kitchen to accomplish.
Click to expand...
Click to collapse
Hi I will pay you $40 to Deodex Xiaomi.eu rom 8.9.6 for Mi Max 3 (Nitrogen)
I want Xposed badly and am willing to pay for a solution
cobram3 said:
Hi I will pay you $40 to Deodex Xiaomi.eu rom 8.9.6 for Mi Max 3 (Nitrogen)
I want Xposed badly and am willing to pay for a solution
Click to expand...
Click to collapse
You're on the wrong forum then
vavill said:
I have xposed working by deodex rom
Click to expand...
Click to collapse
Can you share your ROM with us or give a short introduction, which steps you have to do (for beginners)?
Thnx.
MMN said:
Can you share your ROM with us or give a short introduction, which steps you have to do (for beginners)?
Thnx.
Click to expand...
Click to collapse
Ok, I must probably build myself a deodexed ROM.
Can someone tell me which ROM is best for this device?
Can I also take the stock ROM for it?