Database Develop

Huawei P7-L00 Soft Bricked [RESOLVED]

Hi, my Huawei P7-L00 is soft-bricked I think. I have access to Fastboot mode and recovery mode though, but I think I don't have any ROM installed so I can't get past the boot logo.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is an image of my fastboot screen. It says Phone unlocked so I think my bootloader is unlocked. Using fastboot, I can flash CWM recovery but I cannot find the correct version for the L00, the version I have is for the L05 or L07.
As you can see It says it is only for the L05 or the L07. Does anyone know a CWM recovery for the L00 they can share the download link to? TWRP recovery does not work on this phone I am unable to press any of the buttons and it renders unresponsive. Or, If anyone has the stock recovery for the L00 I would appreciate that as well.
The problem with the CWM recovery for L05 and L07 is that I cannot install updates for zip files. I have tried numerous ROMs including official and third party ROMs but the same error (bad, Installation aborted) occurs. I believe this is because of the CWM version mismatch.
Also, I have tried to use adb to flash the ROM on, but my adb cannot find my device in bootloader mode, or when my phone is in the bootloop. However, fastboot is able to recognize it in fastboot mode.
Overall, if anyone could provide help with the following areas, I would greatly appreciate it:
1. Find a working CWM recovery for the Huawei P7-L00.
2. Find a stock recovery for the Huawei P7-L00 so I can install an official ROM from Huawei's website.
3. Help me find a way to get adb to recognize my device

1. In fastboot mode you have to work with fastboot, not with adb.
2. Download firmware version you had, extract using Huawei Update Extractor cust.img, system.img, boot.img (recovery.img if you want get back to stock recovery).
3. Flash images via fastboot:
Code:
fastboot flash system system.img
fastboot flash cust cust.img
fastboot flash boot boot.img
fastboot flash recovery recovery.img
That's all. Three simple steps. What's the problem?

Or you can download your official ROM, extract official recovery from there and flash it and than flash the official ROM with forced update

Thanks for the quick responses! I used Kostyan_nsk's method and resolved the problem but I'm sure ibeqa's method would've worked just as well, but maybe a bit more time consuming. Thank you!

Hey there, I would have seemed to have soft bricked my phone as well. And apparently, it's says PHONE LOCKED unlike the one that has been posted above? Any advice on how to proceed?
Thanks
P/S: my phone is P7-L10

You could try to use Kostyan_nsk's method as well, but if that doesn't work, you need to figure out a way to unlock bootloader on your phone.

BadgerDev said:
You could try to use Kostyan_nsk's method as well, but if that doesn't work, you need to figure out a way to unlock bootloader on your phone.
Click to expand...
Click to collapse
do you have a process in mind to unlock bootloader in this case ?

Joseluisska said:
do you have a process in mind to unlock bootloader in this case ?
Click to expand...
Click to collapse
Unfortunately, I don't. My phone came with it's bootloader unlocked so I never went through the process of trying to unlock it.

Joseluisska said:
do you have a process in mind to unlock bootloader in this case ?
Click to expand...
Click to collapse
Flash firmware 133 and you'll have unlocked bootloader

For any soft brick
Kostyan_nsk said:
1. In fastboot mode you have to work with fastboot, not with adb.
2. Download firmware version you had, extract using Huawei Update Extractor cust.img, system.img, boot.img (recovery.img if you want get back to stock recovery).
3. Flash images via fastboot:
Code:
fastboot flash system system.img
fastboot flash cust cust.img
fastboot flash boot boot.img
fastboot flash recovery recovery.img
That's all. Three simple steps. What's the problem?
Click to expand...
Click to collapse
Thank you so much! You helped me a lot.
A reference guide for someone how to do it (fastboot procedure and commands) is here:

Remove warning bootloader unlocked message (EVA-L19)

Hi everyone!
As you can see (according to the title), I'm newbie for this.
Is there a way to get rid of/remove/hide this message?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I was Samsung user for ages, this is my first Huawei device... i hope there is someone who can help & explain 'how to' step by step.
2 .app files downgrade + fastboot oem relock (code) didn't help
Sorry, english is not my native language, thx in advance.

As far as I know, this is how it works! There's no way to remove this message. Cheers!

roottree said:
As far as I know, this is how it works! There's no way to remove this message. Cheers!
Click to expand...
Click to collapse
Yup, I thought so... I expected such an answer, but I still wanted to be 100% sure that could not be undone afterwards. Thank you!
The first time I successfully re-locked it, there was just "Phone: Relocked" message in fastboot mode, but warning still appeared.
I played a bit more with my P9, trying to enable an OEM unlock option at last (wich is ofc unavailable/grayed out).
Now I can not even activate the command for some reason, it says this:
Well, i can live with this if there is no solution. Everything else works fine.

>> trying to enable an OEM unlock option at last (wich is ofc unavailable/grayed out).
Try the following: by Vol+ and Pow boot to eRecovery and take Hard reset with wiping Internal data.
Also, from Settings, Advanced, Backup and reset, Factory reset with Internal memory.
Before, remove password/pin/fingerprint

You can go back to stock and fully relock your bootloader. But for that you have to "rollback" to Android 6 and after you did that you can update normally trough EMUI to the latest version. Your bootloader will be locked again and the message will disappear.
Relocking the bootloader with modifications like root installed is not possible as far as I know.

Rollback will do it for sure but it takes longer (and user did not report which exact stock ROM, cust, etc he has, all that must be taken care when rolling back)
Btw, rollback implicitely includes Factory reset and wiping Internal memory
IMO, Factory reset with wiping Internal memory, directly from Nougat (without rolling back to MM), might be enough to get OEM Onlock button back functional.
After that, relocking Bootloader must work.
Note: If user wants to have Bootloader unlocked, then must live with the Warning on boot.
Unlocked Bootloader (as long as no root nor TWRP) does not prevent OTA.
It is just a warning on boot, nothing more.
Also, locking or relocking Bootloader automatically forces Hard reset

zgfg said:
IMO, Factory reset with wiping Internal memory, directly from Nougat (without rolling back to MM), might be enough to get OEM Onlock button back functional.
Click to expand...
Click to collapse
Nope, i wiped it... i will try to rollback to C900B300 -> C432B210. Thx!
I know that OEM switch is active even with M6 & unlocked Bootloader combined, but I want it active with N7 even with locked BL since i am done with playing, stock rom works smooth, and fast enough.
I will try to relock it again from M6 + OEM unlocked and let you know guys!

EDIT:
C900B300 (android 7) -> fastboot oem relock (code) didn't help, now flashing M6
__________
There is another problem with android 6:
OEM Switch works just fine, but can't relock bootloader. Fastboot command is accepted, but wiping data always fails at 7%
Prolly there is something that I am doing wrong. Not sure if it is flashing or something else.

Can you try wiping with the recovery before? First try TWRP and if it doesn't work then stock recovery.

christopherpfister said:
Can you try wiping with the recovery before? First try TWRP and if it doesn't work then stock recovery.
Click to expand...
Click to collapse
Sorry, could you be more specific? I am still newbie for this.
If You mean:
1. flash twrp recovery => wipe all
2. flash stock from B210 and retry
One more question. I am not sure how to flash full stock firmware?
a: Unzip "update.zip" to sd/dload and VOL+/- & ON combination
b: Flash .APP via fastboot?
What are cust package and public data for? Never flashed 'em to my device.

Even if reset/wiping on relock failed, did you reboot to system and check if OEM Unlock button is now workable (no more grayed)?

danilo0230 said:
Sorry, could you be more specific? I am still newbie for this.
If You mean:
1. flash twrp recovery => wipe all
2. flash stock from B210 and retry
One more question. I am not sure how to flash full stock firmware?
a: Unzip "update.zip" to sd/dload and VOL+/- & ON combination
b: Flash .APP via fastboot?
What are cust package and public data for? Never flashed 'em to my device.
Click to expand...
Click to collapse
That's what I meant. No success?
You have to extract the contents of the zip file into the folder called "dload". The folder has to be on the root of your *external* sdcard.
You need to do that with all available zips, not just the main one!
Otherwise you will be missing some data including huawei applications like the keyboard.

zgfg said:
Even if reset/wiping on relock failed, did you reboot to system and check if OEM Unlock button is now workable (no more grayed)?
Click to expand...
Click to collapse
OEM Button works fine since i am on android 6MM, but to get it work on Nougat i suppose that i have to relock bootloader, atm it's mission impossible to me
christopherpfister said:
That's what I meant. No success?
You have to extract the contents of the zip file into the folder called "dload". The folder has to be on the root of your *external* sdcard.
You need to do that with all available zips, not just the main one!
Otherwise you will be missing some data including huawei applications like the keyboard.
Click to expand...
Click to collapse
Didn't try to mess up with recoveries yet, i guess that i flashed it wrong and that's what causing stock-recovery unable to wipe data.
I will retry to flash it as you said (all files merged in dload) before re-flashing recovery. Thx!

danilo0230 said:
Didn't try to mess up with recoveries yet, i guess that i flashed it wrong and that's what causing stock-recovery unable to wipe data.
I will retry to flash it as you said (all files merged in dload) before re-flashing recovery. Thx!
Click to expand...
Click to collapse
Don't merge the files. I believe they have the same names so that wouldn't work. Do one after another. You can switch the files from your computer while TWRP is running after each flash.

If you are on b182, you should be receiving OTA for Nougat, you don't need to DLOAD Nougat installation
If OEM Unlocking button is functional now, it will stay so when you update to Nougat
I never relocked, I have no problem with the unlocked Bootloader and its warning - but you may try to 'lock' and then 'unlock' again
And double-check iare you using proper code - in other threads people used to report that relocking works

christopherpfister said:
Don't merge the files. I believe they have the same names so that wouldn't work. Do one after another. You can switch the files from your computer while TWRP is running after each flash.
Click to expand...
Click to collapse
Yup, there are same named files. I know that only TWRP can flash .zip -s, but isn't stock firmware without TWRP? Is there any sequence, which file comes first?
zgfg said:
If you are on b182, you should be receiving OTA for Nougat, you don't need to DLOAD Nougat installation
If OEM Unlocking button is functional now, it will stay so when you update to Nougat
I never relocked, I have no problem with the unlocked Bootloader and its warning - but you may try to 'lock' and then 'unlock' again
And double-check iare you using proper code - in other threads people used to report that relocking works
Click to expand...
Click to collapse
Ok then, updating it via OTA with OEM enabled ---> trying to relock again. I Will let you know if i succeeded
__________
Well... i tried to reduce battery drain, that's the main reason why i unlocked it.
Afterwards I found out i am shooting in the dark, it's a common hardware problem for P9 devices.
Code is 100% correct 'coz i am using copy/paste from calculation, thx for support guys!

danilo0230 said:
Ok then, updating it via OTA with OEM enabled ---> trying to relock again. I Will let you know if i succeeded
__________
Well... i tried to reduce battery drain, that's the main reason why i unlocked it.
!
Click to expand...
Click to collapse
If you are concerned about battery,
update up to b397 and install then Magic Rainbow v4
https://forum.xda-developers.com/p9/development/rom-huawei-p9-magicrainbow-v4-t3759292
It's based on stock ROM but cleaned from bloatware, prerooted with Magisk, etc
Edit: Maybe OTA will stop yoy with b392 or b394.
Use HWOTA methods to update up to L19 c432 b397
https://forum.xda-developers.com/showpost.php?p=74913874&postcount=3
For that, of course, you need unlocked Bootloaderr and TWRP for Nougat
https://forum.xda-developers.com/p9/development/twrp-t3565703

zgfg said:
you may try to 'lock' and then 'unlock' again
Click to expand...
Click to collapse
Yes, but actually nope...
1. OTA automatically updated B210 => B386
2. fastboot relock worked as you said (wiped 100% this time)
3. OEM button still unavailable
4. Checked fastboot: Phone: unlocked; FRP: unlocked;
Damn! Never understood this

I don't understabd what do you really want, if Fastboot shows Phone unlocked, FRP unlocked then you are ready for TWRP, no matter how OEM Unlocking button shows (grayed out but isn't now in ON position?)
Or, you can do once again Rolling back and forth by OYA to Nougat, if you really want locked Bootloader.

zgfg said:
I don't understabd what do you really want
Click to expand...
Click to collapse
I want bootloader locked without any warning message at startup & working OEM button with Nougat if it's even possible in my case?
zgfg said:
if Fastboot shows Phone unlocked, FRP unlocked then you are ready for TWRP, no matter how OEM Unlocking button shows (grayed out but isn't now in ON position?)
Click to expand...
Click to collapse
Yup i know that I can and how to flash TWRP... but do i even need TWRP for that? If yes, how (step by step)?
zgfg said:
Or, you can do once again Rolling back and forth by OYA to Nougat, if you really want locked Bootloader.
Click to expand...
Click to collapse
I'm done with playing with customs, rooting etc, just wanna restore completely clean factory firmware (without warnins, greyed out buttons etc.)

(SOLVED) Honor 9 Lite Bootloop Stuck in Huawei eRecovery (BL Relocked & FRP Lock)

Hi All, I need a big help. :crying:
I've a bricked my Honor 9 Lite (LLD-L21)
Yesterday i did a restore rom from twrp backup and successfully to restore it. After it i did a format factory in TWRP, done and reboot to reboot system, I thought this would be fine, but what happened was my phone just stuck at Huawei eRecovery with EMUI logo and three option (Download latest and recovery, Reboot and Shutdown).
And now i can't access to TWRP mode. just stock recovery mode with option "Reboot system, Wipe data/factory, Wipe cache) but while i try to Wipe data/factory i got it error after 40% and stopped self.
In my situation, i tried to :
**Using Huawei eRecovery : i only get a message "Getting Package info failed",
**Trying to update with dload folder (UPDATE.APP) vol + - and power button : Stuck at 5% and then "Software install failed",
**Flashing .IMG file trought fastboot mode "FAILED (remote: Command not allowed)"
**Unlock bootloader again that show: "Necessary to unlock FRP! Navigate to Developer option, and enable OEM unlock"
This my Honor 9 Lite in current state :
Firmware: LLD-L21 8.0.0.122(C636)
Device name: LLD-L21
Oeminfo: hw/spcseas
Bootloader state: RELOCKED (unlocked)
FRP state: LOCKED
*Stuck at Huawei eRecovery
*Bootloader mode with Locked state
*Just have Stock Recovery (Reboot system, Wipe data/factory, Wipe cache) not TWRP.
Is there anywhere an Option to repair it?
Thanks in advance. :highfive:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

SeenThings said:
Hi All, I need a big help. :crying:
I've a bricked my Honor 9 Lite (LLD-L21)
Yesterday i did a restore rom from twrp backup and successfully to restore it. After it i did a format factory in TWRP, done and reboot to reboot system, I thought this would be fine, but what happened was my phone just stuck at Huawei eRecovery with EMUI logo and three option (Download latest and recovery, Reboot and Shutdown).
And now i can't access to TWRP mode. just stock recovery mode with option "Reboot system, Wipe data/factory, Wipe cache) but while i try to Wipe data/factory i got it error after 40% and stopped self.
In my situation, i tried to :
**Using Huawei eRecovery : i only get a message "Getting Package info failed",
**Trying to update with dload folder (UPDATE.APP) vol + - and power button : Stuck at 5% and then "Software install failed",
**Flashing .IMG file trought fastboot mode "FAILED (remote: Command not allowed)"
**Unlock bootloader again that show: "Necessary to unlock FRP! Navigate to Developer option, and enable OEM unlock"
This my Honor 9 Lite in current state :
Firmware: LLD-L21 8.0.0.122(C636)
Device name: LLD-L21
Oeminfo: hw/spcseas
Bootloader state: RELOCKED (unlocked)
FRP state: LOCKED
*Stuck at Huawei eRecovery
*Bootloader mode with Locked state
*Just have Stock Recovery (Reboot system, Wipe data/factory, Wipe cache) not TWRP.
Is there anywhere an Option to repair it?
Thanks in advance. :highfive:
Click to expand...
Click to collapse
Did your backup had the stock recovery in it?
If it didn't then you can access the TWRP by selecting factory reset from the erecovery, it'll just boot to TWRP.
But if you did restore the stock recovery, well you might be in a tight corner.
Whats causing the bootloop is the factory reset you did in TWRP. EMUI have files in the data partition, who knows what, that are necessary to use the phone. But TWRP factory resets like other phones so that means the necessary files are gone now. I've personally experienced this but luckily had an unlocked bootloader.
Try pressing factory reset from e recovery. If you didn't restore stock recovery, you'll boot to TWRP.
And why did you relock the bootloader without checking if the phone boots or not? And don't ever factory reset from TWRP.

Fredin_ said:
Did your backup had the stock recovery in it?
If it didn't then you can access the TWRP by selecting factory reset from the erecovery, it'll just boot to TWRP.
But if you did restore the stock recovery, well you might be in a tight corner.
Whats causing the bootloop is the factory reset you did in TWRP. EMUI have files in the data partition, who knows what, that are necessary to use the phone. But TWRP factory resets like other phones so that means the necessary files are gone now. I've personally experienced this but luckily had an unlocked bootloader.
Try pressing factory reset from e recovery. If you didn't restore stock recovery, you'll boot to TWRP.
And why did you relock the bootloader without checking if the phone boots or not? And don't ever factory reset from TWRP.
Click to expand...
Click to collapse
Thank you sir, I just want to original again.
after the first restore the phone runs normally, but I don't turn on the OEM unlock again, then I reboot into the bootloader (still unlock) I tried to relock the bootloader. after rebooting instead bootloop and can't go to TWRP, TWRP is gone. return to stock recovery.
Are there EDL methods like xia*mi ? there can force flash with this method without unlocking BL.

SeenThings said:
Thank you sir, I just want to original again.
after the first restore the phone runs normally, but I don't turn on the OEM unlock again, then I reboot into the bootloader (still unlock) I tried to relock the bootloader. after rebooting instead bootloop and can't go to TWRP, TWRP is gone. return to stock recovery.
Are there EDL methods like xia*mi ? there can force flash with this method without unlocking BL.
Click to expand...
Click to collapse
Im not sure but try this:https://forum.xda-developers.com/9-lite/how-to/guide-unlock-frp-phone-bootlooping-t3808650
If it works you'll probably have an unlocked device and you can flash stock rom with HuRupdater later on

Fredin_ said:
Im not sure but try this:https://forum.xda-developers.com/9-lite/how-to/guide-unlock-frp-phone-bootlooping-t3808650
If it works you'll probably have an unlocked device and you can flash stock rom with HuRupdater later on
Click to expand...
Click to collapse
Yes, I have read that, but thank you for your attention. :good:
with DC-Phoenix it's amazing, but it's not free. ha ha
well, I have to sacrifice my money to buy DC-Phoenix.
whether DC-Phoenix could serve bitcoin payments?

SeenThings said:
Thank you sir, I just want to original again.
after the first restore the phone runs normally, but I don't turn on the OEM unlock again, then I reboot into the bootloader (still unlock) I tried to relock the bootloader. after rebooting instead bootloop and can't go to TWRP, TWRP is gone. return to stock recovery.
Are there EDL methods like xia*mi ? there can force flash with this method without unlocking BL.
Click to expand...
Click to collapse
None that I know of ?. Are you still bricked?

Fredin_ said:
None that I know of . Are you still bricked?
Click to expand...
Click to collapse
Yes bro. waiting $.
When done, i'll update this thread to solved.

SeenThings said:
Yes bro. waiting $.
When done, i'll update this thread to solved.
Click to expand...
Click to collapse
Be aware that depending on the ROM you have flashed to your H9L, DC Unlocker/ Phoenix and HCU may not work.
None of them support the later firmwares and fail trying to read the necessary data from device.
You may be OK with 122 as, AFAIK it is pre July/August 2018.
Also are you using proper DLoad firmware ?
Normal OTAs will not work with DLoad, instead search here for correct ROm and try it :-
https://androidhost.ru/search.html

Sparkrite said:
Be aware that depending on the ROM you have flashed to your H9L, DC Unlocker/ Phoenix and HCU may not work.
None of them support the later firmwares and fail trying to read the necessary data from device.
You may be OK with 122 as, AFAIK it is pre July/August 2018.
Also are you using proper DLoad firmware ?
Normal OTAs will not work with DLoad, instead search here for correct ROm and try it :-
https://androidhost.ru/search.html
Click to expand...
Click to collapse
Ok thanks sir, but i search the "LLd-L21 8.0.0.122 (C636)" is'nt found. just one a site to having this ROM LLd-L21 8.0.0.122 (C636) but there isn't free again. must paying it before downloading
I have an original .img for full ROM my H9L after unboxing and rooted, but don't know what to do now. haha

SeenThings said:
Ok thanks sir, but i search the "LLd-L21 8.0.0.122 (C636)" is'nt found. just one a site to having this ROM LLd-L21 8.0.0.122 (C636) but there isn't free again. must paying it before downloading
I have an original .img for full ROM my H9L after unboxing and rooted, but don't know what to do now. haha
Click to expand...
Click to collapse
http://huawei-firmware.com/download...ndL21AC636B125 800125LLDL21C636B125 800125&c=
https://blogthetech.com/flash-file-...sP0VLlWyn1gFtkC0HdEeXhGWK3tjj2tCHsizDRFe/hqU=
http://update.hicloud.com:8180/TDS/d...ull/update.zip
All for the LLd-L21 C636 but are Full OTAs (not service ROMs), but maybe worth a try after extracting UPDATE.APP.
If all fails then I would try a service ROM from androidhost.ru

Sparkrite said:
http://huawei-firmware.com/download...ndL21AC636B125 800125LLDL21C636B125 800125&c=
https://blogthetech.com/flash-file-...sP0VLlWyn1gFtkC0HdEeXhGWK3tjj2tCHsizDRFe/hqU=
http://update.hicloud.com:8180/TDS/d...ull/update.zip
All for the LLd-L21 C636 but are Full OTAs (not service ROMs), but maybe worth a try after extracting UPDATE.APP.
If all fails then I would try a service ROM from androidhost.ru
Click to expand...
Click to collapse
i've tried all LLD-L21 version 124-132 rom but FAIL. sir. also i use firmware finder hw multi tool 8. :crying:
this my prop backup :
ro.build.display.id=LLD-L21 8.0.0.122(C636)
ro.build.version.incremental=122(C636)
ro.build.description=LLD-L21-user 8.0.0 HONORLLD-L21 122(C636) release-keys
ro.build.fingerprint=HONOR/LLD-L21/HWLLD-H:8.0.0/HONORLLD-L21/122(C636):user/release-keys
ro.vendor.build.fingerprint=HONOR/LLD-L21/HWLLD-H:8.0.0/HONORLLD-L21/122(C636):user/release-keys
i search for 122 not found except easy-firmware*com but there its not free :crying:

@SeenThings
Ok, as a start you can always email Huawei support and ask for your FRP key.
At least then we will be able to flash some custom recovery to rescue the phone.

Done. This a good night for me. "Desaster Solved"
My Honor 9 Lite has been living normally again, also the BL & FRP has been Unlocked again.
Thank You so much for big help to @hackintosh5 @OldDroid & ぁ て .
:highfive::good::good::good:
Follow this method for unlock your bootloader ;
https://forum.xda-developers.com/9-lite/how-to/unlock-bootloader-code-t3859685,

SeenThings said:
Done. This a good night for me. "Desaster Solved"
My Honor 9 Lite has been living normally again, also the BL & FRP has been Unlocked again.
Thank You so much for big help to @hackintosh5 @OldDroid & ぁ て .
:highfive::good::good::good:
Follow this method for unlock your bootloader ;
https://forum.xda-developers.com/9-lite/how-to/unlock-bootloader-code-t3859685,
Click to expand...
Click to collapse
@SeenThings
Ah great!
I understood you already had your BL code as you had re-locked it.
Any chance you might share what you had to do, please?

Sparkrite said:
@SeenThings
Ah great!
I understood you already had your BL code as you had re-locked it.
Any chance you might share what you had to do, please?
Click to expand...
Click to collapse
Yes sir, i've the bl code from june ago.
hmm, im just following the instruction from @hackintosh5, he and team help me like on thread.

SeenThings said:
Yes sir, i've the bl code from june ago.
hmm, im just following the instruction from @hackintosh5, he and team help me like on thread.
Click to expand...
Click to collapse
I'm sorry, I don't understand.
You already had your BL code and the thread linked to is how to unlock BL without code.
So how did that help?
What I'm trying to ascertain, is what firmware did you flash to get your phone running again and how ?
TIA

Sparkrite said:
I'm sorry, I don't understand.
You already had your BL code and the thread linked to is how to unlock BL without code.
So how did that help?
What I'm trying to ascertain, is what firmware did you flash to get your phone running again and how ?
TIA
Click to expand...
Click to collapse
well, that time i can't flash anything firmware version without twrp coz im not have twrp and in fastboot can't to do anything .
so that method is flashing a slock file for unlock the BL for with a moment, a slock file can be obtained from the phone at fastboot mode. Then flash twrp and here i can flash any firmw with different version also diffrent country code and phone will work normally again but if flash diferen firm country, maybe phone got loss the imei id.
You can ask @hackintosh5 for detailed tutorial.

SeenThings said:
well, that time i can't flash anything firmware version without twrp coz im not have twrp and in fastboot can't to do anything .
so that method is flashing a slock file for unlock the BL for with a moment, a slock file can be obtained from the phone at fastboot mode. Then flash twrp and here i can flash any firmw with different version also diffrent country code and phone will work normally again but if flash diferen firm country, maybe phone got loss the imei id.
You can ask @hackintosh5 for detailed tutorial.
Click to expand...
Click to collapse
I know about @hackintosh5 exploit using slock to unlock the BL.
But what I am having trouble trying to understand is, why go through all that when you already have the code to unlock your BL ??

Sparkrite said:
I know about @hackintosh5 exploit using slock to unlock the BL.
But what I am having trouble trying to understand is, why go through all that when you already have the code to unlock your BL ??
Click to expand...
Click to collapse
I think he lost the code. Either that or a security patch changed it (yes that does happen!)
Edit: just reread the OP, his FRP is locked! That means he can't use the code.

hackintosh5 said:
I think he lost the code. Either that or a security patch changed it (yes that does happen!)
Edit: just reread the OP, his FRP is locked! That means he can't use the code.
Click to expand...
Click to collapse
Jesus, what am I like?? Of course he can't.
Cheers @hackintosh5.

Lenovo Z5s Update to ZUI 11.5 (Android 10)

Disclaimer: No guarantees. Follow at your own risk. I am not responsible for bricked phones.
Credits to 4PDA
Prerequisites:
Knowledge of OEM unlocking from Developer options, adb, and fastboot
Knowledge of QPST in case you encounter bootloop, so you can revert to a reliable stock ROM
Unlocked bootloader (from here)
1) Get your bootloader unlocked, if you haven't already.
- Visit https://www.zui.com/iunlock
- Enter the IMEI1 (Second number when you call *#06# with the phone)
- Enter the Device ID from the Bootloader/Fastboot (Hold VOL- and Power, while device is off)
- Enter your email and captcha and set the checkmark to acknowledge voiding your warranty.
- If you get an error saying that your IMEI1 is wrong, put in a sim card and wait a few hours. If it still doesn't work, write an email to [email protected]
- In the developer settings in android, enable usb debugging and oem unlock.
- Flash the sn.img file you receive with fastboot (again, hold vol- and power while the device is off). Command is 'fastboot flash unlock sn.img'. You need compatible usb drivers, qualcom drivers and adb/fastboot to do that. Use google or write me a PM if you have trouble with that.
- execute 'fastboot oem unlock-go'
- This allows you to use fastboot to flash custom system/boot/vendor/vbmeta images
Click to expand...
Click to collapse
@wzsx150's recovery-TWRP-3.3.1-1015-LENOVO_Z5S-CN-wzsx150.img MEGA Google Drive
@wzsx150's TWRP for Android 10 TWRP-3.3.2B-0508-LENOVO_Z5S-10.0-CN-wzsx150-fastboot.7z (extract the IMG file and flash using fastboot)
3) Now you can flash TWRP.
- Download ...
- Flash it from the Bootloader with 'fastboot flash recovery recovery-TWRP-3.3.1-1015-LENOVO_Z5S-CN-wzsx150.img'
- Press VOL UP / VOL DOWN to navigate to recovery.
Click to expand...
Click to collapse
11.3.169: L78071_11.3.169_DEV_FullOTA.zip
11.5.096 Update: ZUI_11.3.169_DEV_TO_ZUI_11.5.096_ST.zip
11.5.111 Update: ZUI_11.5.096_TO_ZUI_11.5.111_ST.zip
Other files, use at your own risk
Disable_Dm-Verity_ForceEncrypt_08.18.2019.zip
Official TWRP for jd2019
In recovery, Format data, then wipe Dalvik/ART Cache, Cache, Data
Reboot to recovery
Install in order, without rebooting, 11.3.169 -> 11.5.096 Update -> 11.5.111 Update.
Install Magisk 20.4
Install TWRP for Android 10 (above) using fastboot if the update replaces stock recovery after rebooting
Edited out from original
Wipe Data and flash Disable_Dm-Verity_ForceEncrypt_08.18.2019.zip
In order not to encrypt Data in the future, install Official TWRP immediately after installing updates. Install > Install Image > twrp-3.3.1-0-jd2019.img
Install GApps
Note: I do not know if the 11.5 update relocks the bootloader. It doesn't lock the bootloader.
I had bootloop from OpenGApps. 4PDA post advises to use BiTGApps. You can install Google Play Store from the built-in Lenovo App Center and that's what I did.
Haven't tried disabling dm-verity and forceencrypt.

Good job, my man, I'll check it out tonight and prepare ourselves an updateable package for people coming from any rom to avoid the hassle of going through all of that. As soon as I get it working will release a new TWRP for Android 10.

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

carlshark said:
View attachment 5036881
Click to expand...
Click to collapse
Nice job man, so the update works as it should? I'm patching the images and will upload a full ota update to make it easier to move between Pie and 10. Regarding recoverys, did you test any twrp? Any decryption working? What about this official twrp, does it actually work? Thanks for the files man, this will make everything much easier

jacoghi said:
Nice job man, so the update works as it should? I'm patching the images and will upload a full ota update to make it easier to move between Pie and 10. Regarding recoverys, did you test any twrp? Any decryption working? What about this official twrp, does it actually work? Thanks for the files man, this will make everything much easier
Click to expand...
Click to collapse
I've been using the phone on 11.5.111 for a couple of days now.
I flashed both the 3.3.2 TWRP of @wzsx150 and the official TWRP and they seem to be working. I didn't turn off encryption so it seems to work well.
Happy to have helped in a small way. Thank you for your hard work!

links not works

vesdan said:
links not works
Click to expand...
Click to collapse
Thanks for the heads up, apparently the original poster removed the links. Will be uploading the ones I used.
Reuploading done.

Thank you very much

Thanks for the rom my friend.
Can you please upload the latest update cause i am rooted and it cannot be installed via the system.
Also guys ,does anyone knows if i can put the latest android 10 with multilanguage rom ?Thank you for everything ,i appreciate.

thx for the post, i am wondering if the ota will be avaliable, because the bootloader unlock site does not approve my imei number

sorry guys, i rushed and flashed the gapps and now facing a bootloop, i prepared qpst and a stock rom but i verz rom i am missing a content.xml file, can anyone please help me?

galardo_2 said:
sorry guys, i rushed and flashed the gapps and now facing a bootloop, i prepared qpst and a stock rom but i verz rom i am missing a content.xml file, can anyone please help me?
Click to expand...
Click to collapse
https://mega.nz/folder/PegDDQ7I#bmCCIt1lAWAe7ui_gkmwSQ/folder/fOAQ1QCa
here is many ROMS
Do not install gapps on ZUI !!!!

vesdan said:
https://mega.nz/folder/PegDDQ7I#bmCCIt1lAWAe7ui_gkmwSQ/folder/fOAQ1QCa
here is many ROMS
Do not install gapps on ZUI !!!!
Click to expand...
Click to collapse
but the qpst app need an aditional content.xml file, where can i get one

Install global via fastboot, all is included or in qfil ROM is all in zip file

vesdan said:
Install global via fastboot, all is included or in qfil ROM is all in zip file
Click to expand...
Click to collapse
I tried and failed again

i tired and failed again

galardo_2 said:
thx for the post, i am wondering if the ota will be avaliable, because the bootloader unlock site does not approve my imei number
Click to expand...
Click to collapse
I tried unlocking 2 Lenovo phones. The first attempt had sent me an email, but the second attempt did not. The unlock procedure went through though. So I tried changing the link provided in the first email http://cdn.zui.lenovomm.com/developer/lenovoboot/xxxxxxxx/sn.img (xxxxxxxx - serial number of phone) and it worked. This might not work for you though.
As for the OTA, I really am not sure... Probably

carlshark said:
I tried unlocking 2 Lenovo phones. The first attempt had sent me an email, but the second attempt did not. The unlock procedure went through though. So I tried changing the link provided in the first email http://cdn.zui.lenovomm.com/developer/lenovoboot/xxxxxxxx/sn.img (xxxxxxxx - serial number of phone) and it worked. This might not work for you though.
As for the OTA, I really am not sure... Probably
Click to expand...
Click to collapse
after a few atempts (3-4 days) the imei number got accepted, but now i have another problem as you can see, i flashed the gapps and now i have the bootloop and i dont have a clue how to undone it

hello friends I have all the updates installed, but it tells me that there is a new one, where can I download it?
On the other hand, what difference is there between installing by twrp and qfill?

galardo_2 said:
i tired and failed again
Click to expand...
Click to collapse
This is problem with program, drivers sahara. Try fastboot

REALME C11 stuck in bootloop after flashing magisk.zip through TWRP recovery

I wanted to root my realme c11 rmx2185 so I unlocked the bootloader, flashed twrp recovery and then after flashing magisk.zip and selecting the reboot option it got stuck in boot loop. Now all I can do is to open the bootloader mode and nothing else otherwise it will keep rebooting again and again. If anyone can help me out I will be very grateful. Thank you.

Please answer the following questions
• What software version (e.g. RMX2185_11_A.87 etc.) were you using?
• Did you flash a magisk patched boot.img or a magisk installer?
• Did you do anything else before flashing Magisk and before the incident happened?
Please answer these so I can be able to help you.

• What software version (e.g. RMX2185_11_A.87 etc.) were you using?
RMX2185_11_A.93
• Did you flash a magisk patched boot.img or a magisk installer?
I downloaded magisk.zip and flashed it through TWRP custom recovery
• Did you do anything else before flashing Magisk and before the incident happened?
I unlocked the bootloader which cleared all the data on my phone ---> flashed TWRP.img
Before this incident my phone was absolutely in default condition.
When I asked this question my bootloader was unlocked but now I have locked it and all i can do is to press the power button to see the bootlooping. Can you help me out from here?
I locked the bootloader as my phone was in warranty so I thought it would be better to get it fixed by the company itself , but since my city has been locked down due to the covid situation, my phone is still with me unrepaired .
Now I can't even get to the bootloader mode by pressing buttons .
I wanted to root my device and I followed exactly what was given on this website > https://safeboxguide.com/how-to-root-realme-c11/

Sorry, wrong quote!

skund singh said:
I wanted to root my realme c11 rmx2185 so I unlocked the bootloader, flashed twrp recovery and then after flashing magisk.zip and selecting the reboot option it got stuck in boot loop. Now all I can do is to open the bootloader mode and nothing else otherwise it will keep rebooting again and again. If anyone can help me out I will be very grateful. Thank you.
Click to expand...
Click to collapse
1st, what do you mean by "open the bootloader mode" ? If what you mean is you can boot the device into fastboot mode ( using hard keys or else ) then the solution is quite easy. Just take the stock boot image of A93 ( if you don't have it then u can pm me, I'll send ) then flash into the device using follow commands :
- fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
- fastboot flash boot boota93.img
- fastboot reboot
( remember to use patched vbmeta.img )
Your device will boot normal again.
2nd, from A87, the devs of Realmeme did something with the code so that if directly flashing magisk from custom recovery may random cause bootloop. So, my suggestion is to use fastboot command and flash the patched boot images like old times.

skund singh said:
• What software version (e.g. RMX2185_11_A.87 etc.) were you using?
RMX2185_11_A.93
• Did you flash a magisk patched boot.img or a magisk installer?
I downloaded magisk.zip and flashed it through TWRP custom recovery
• Did you do anything else before flashing Magisk and before the incident happened?
I unlocked the bootloader which cleared all the data on my phone ---> flashed TWRP.img
Before this incident my phone was absolutely in default condition.
When I asked this question my bootloader was unlocked but now I have locked it and all i can do is to press the power button to see the bootlooping. Can you help me out from here?
I locked the bootloader as my phone was in warranty so I thought it would be better to get it fixed by the company itself , but since my city has been locked down due to the covid situation, my phone is still with me unrepaired .
Now I can't even get to the bootloader mode by pressing buttons .
I wanted to root my device and I followed exactly what was given on this website > https://safeboxguide.com/how-to-root-realme-c11/
Click to expand...
Click to collapse
Now the situation is more complicated if your device's bootloader is locked. But why is that u r in boot looping and u choose to lock your bootloader????

LinhBT said:
1st, what do you mean by "open the bootloader mode" ? If what you mean is you can boot the device into fastboot mode ( using hard keys or else ) then the solution is quite easy. Just take the stock boot image of A93 ( if you don't have it then u can pm me, I'll send ) then flash into the device using follow commands :
- fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
- fastboot flash boot boota93.img
- fastboot reboot
( remember to use patched vbmeta.img )
Your device will boot normal again.
2nd, from A87, the devs of Realmeme did something with the code so that if directly flashing magisk from custom recovery may random cause bootloop. So, my suggestion is to use fastboot command and flash the patched boot images like old times.
Click to expand...
Click to collapse
yes sir, by "open bootloader mode" I meant booting into fastboot mode.
Now I have realised the mistakes which I did previously--
1. I was not having the latest A93 stock boot image
2. I didn't disable the verification(- fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img)
I locked the bootloader again so that I can get it repaired for free as you know the warranty won't be valid if they found the bootloader unlocked.
Is there any other way this problem could be resolved???

skund singh said:
yes sir, by "open bootloader mode" I meant booting into fastboot mode.
Now I have realised the mistakes which I did previously--
1. I was not having the latest A93 stock boot image
2. I didn't disable the verification(- fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img)
I locked the bootloader again so that I can get it repaired for free as you know the warranty won't be valid if they found the bootloader unlocked.
Is there any other way this problem could be resolved???
Click to expand...
Click to collapse
Replied with file sent at your inbox.

Sorry for the late response.
Getting your phone back to life without the help of a Service Center will be tough.
Since you locked your bootloader, it’s gonna be quite hard to get you back. But when there’s a will there’s always a way.
If you have a laptop or a PC, you can use Platform Tools to reboot your phone to TWRP (since you mentioned that you already flashed TWRP). After booting to TWRP Recovery, you can simply flash a copy of a boot image. Since @LinhBT already sent you the file, you can use that one.
To install the boot image, go to Install, click Install Image, look for the boot image file, click on it, then choose Boot partition. Then flash.
After doing that, your phone should be back to normal. Tell me if it works for you.

I'm having almost the same problem, I want to root my phone to install TWRP and Install Lineage OS. I have also the update package RMX2185 A.95 in case I needed it. I patched the boot.img with magisk manager and locked the bootloader (fastboot flashing lock and fastboot flashing lock_critical).
Now my phone stuck in a Bootloop with a Red State Warning and I can't go to recovery mode.
Details:
Model: RMX2185
Firmware version: RMX2185 A.101
Rooted: No
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Marielorteza said:
I'm having almost the same problem, I want to root my phone to install TWRP and Install Lineage OS. I have also the update package RMX2185 A.95 in case I needed it. I patched the boot.img with magisk manager and locked the bootloader (fastboot flashing lock and fastboot flashing lock_critical).
Now my phone stuck in a Bootloop with a Red State Warning and I can't go to recovery mode.
Details:
Model: RMX2185
Firmware version: RMX2185 A.101
Rooted: No
View attachment 5527747
Click to expand...
Click to collapse
I got my phone fixed at the service center . They replaced the motherboard as those people are not professionals they don't have enough knowledge about the softwares and stuff. I got it replaced as it was absolutely free for me( I locked the bootloader so that my warranty doesn't get void as i had mentioned earlier)
Getting the motherboard replaced was much easier for me than finding a pro on the internet who might have a solution for this.
I believe that there must be some solution to this problem other than getting the motherboard replaced.
If you find any solution please share.

My problem is I don't know where is my warranty card.