deleted.
Stock recovery and boot
Stock recovery and boot if you need.
* If TWRP shows blank screen when it loads, you can press power to wake up the screen.
Flash tool as well as the drivers can be found here:
https://www.needrom.com/download/blu-pure-xr-p0030uu/#
I'll try to mirror these on a hosting site.
To get into fastboot or recovery menu selection, make sure your phone is off first. Then hold down power+Vol Up keys. Release power while holding Vol Up until menu appears. Use Vol Up to navigate choices and press Vol Down to select.
Before installing TWRP for this device, could someone comment if the camera is better on ROM version 15?
I have v12 but BLU is offering no wireless upgrades. This phone is awesome except for the camera.
When using Flash Tool after using the very good tutorial link above, I'm getting connection to phone but status bar remains red with speed counters remaining fixed. After 5 minutes of only the clock advancing, I'm getting a "Failed to get PMT info" dialog box. Obviously no changes to phone.
I'm assuming this might mean the bootloader is locked. Will try to investigate. If anyone out there understands please reply
p-we said:
When using Flash Tool after using the very good tutorial link above, I'm getting connection to phone but status bar remains red with speed counters remaining fixed. After 5 minutes of only the clock advancing, I'm getting a "Failed to get PMT info" dialog box. Obviously no changes to phone.
I'm assuming this might mean the bootloader is locked. Will try to investigate. If anyone out there understands please reply
Click to expand...
Click to collapse
You need write which OS you're using and details like x32 or x64 bits. Obviously you need right drivers MTK and the attempts to install that if your SO no has authorization (administration function) to SPFT work.
I'm assuming that you read my tutorial for flash Custom recovery....
Sent from my BLUBOO Xtouch using XDA Labs
Hello, noob question here, i've installed the drivers that, i guess, are the fastboot ones, but then after adb reboot bootloader i can't install twrp it says there is no device conected or something like that. I have no other coputer to test right now, i've tried with diferent cables including the original one and there is no change. Could there be a windows 10 compatibility problem?
Thanks for reply
Sorry for bad english.
................................
lopestom said:
You can read others instructions here:
https://forum.xda-developers.com/showpost.php?p=63803008&postcount=5
Or read the file attached....
Sent from my BLUBOO Xtouch using XDA Labs
Click to expand...
Click to collapse
Really thanks mate, i'll try it as soon i can, i hope have some time this weekend.
Cheers
lopestom said:
You can read others instructions here:
https://forum.xda-developers.com/showpost.php?p=63803008&postcount=5
Or read the file attached....
Sent from my BLUBOO Xtouch using XDA Labs
Click to expand...
Click to collapse
No luck for me i tried but cannot install the drivers don't know what the hell. Tried disabling driver enforcemente but no luck. SO is windows 10 x64. Any idea?
Anyone know of any working nougat or oreo rom for this phone?
krzazncrip said:
Anyone know of any working nougat or oreo rom for this phone?
Click to expand...
Click to collapse
Pure XR = Walton Primo X4 = Gionee S6 Pro
Sent from my BLUBOO Xtouch using XDA Labs
lopestom said:
Pure XR = Walton Primo X4 = Gionee S6 Pro
Sent from my BLUBOO Xtouch using XDA Labs
Click to expand...
Click to collapse
Have you tried to flash on this phone Walton Primos or Gionee's Roms?
Download Process Corrupted By Ads
Whenever I try to download the file I get some crazy ad pages.
How can I get a good copy of the twrp?
Wondering if anyone has found any good roms for this yet?
I've searched for Pure XR, Walton Primo X4, and Gionee S6 Pro and haven't saw anything that looks reliable to try.
Let me know of anything out there, thanks in advance.
Dhellis59 said:
Whenever I try to download the file I get some crazy ad pages.
How can I get a good copy of the twrp?
Click to expand...
Click to collapse
MedievalS said:
Have you tried to flash on this phone Walton Primos or Gionee's Roms?
Click to expand...
Click to collapse
lopestom said:
Pure XR = Walton Primo X4 = Gionee S6 Pro
Sent from my BLUBOO Xtouch using XDA Labs
Click to expand...
Click to collapse
krzazncrip said:
Anyone know of any working nougat or oreo rom for this phone?
Click to expand...
Click to collapse
Any one have other link for download?
ali.f said:
Any one have other link for download?
Click to expand...
Click to collapse
What you want link now?? Absolutely just time?!
https://plus.google.com/u/0/104229879953478293622/posts/F6qL6vkdAKh
Sent from my BLUBOO Xtouch using XDA Labs
lopestom said:
What you want link now?? Absolutely just time?!
https://plus.google.com/u/0/104229879953478293622/posts/F6qL6vkdAKh
Sent from my BLUBOO Xtouch using XDA Labs
Click to expand...
Click to collapse
Thanks bro....
Hi everyone, does anyone have the TWRP link? For me, access is denied.
ongangster said:
Hi everyone, does anyone have the TWRP link? For me, access is denied.
Click to expand...
Click to collapse
I'm getting the access denied message as well. Does anyone have the file to repost it?
Related
Hi, this is a stock 4.0.2.A.0.42 global generic rom. This rom is only for people with locked bootloader facing the 0% battery issue!. There is absolutely no reason to use it in other circumstances.
The battery workaround used is 100% compatibile with Bazoocaze's fix - you can use apks, debug entries and all. Don't forget to thank him for the great work.
This package is for Linux only!. If you know how to create .bat files or manually use adb, you sholdn't have problems using it in Windows too. If anyone's willing to prepare Windows package, feel free to do so
HOWTO:
Download and unpack the ROM files.
Step1 Flash Arc_step1_step1.ftf via Flashtool. Turn on the phone afterwards.
Step2 Phone will get stuck on green SE logo - it's okay! Open a console and execute ./step2 which roots the phone and installs battery hack. If there are errors, killall adb and try again. Turn off the phone.
Step3 Flash Arc_step3_step3.ftf via Flashtool. Turn on the phone.
LT15i_4.0.2.A.0.42_lockedBL_battery.7z
Cheers,
z
and the great one is back from hibernation
this time in Xperia 2011 territory!!!
oh boy good times ahead!!!
thank you Z!
@ALL
you will still need to download the complete package from z's post...
attached is a windows version for STEP2:
Step2 Phone will get stuck on green SE logo - it's okay! Open a console and execute ./step2 which roots the phone and installs battery hack. If there are errors, killall adb and try again. Turn off the phone."
Click to expand...
Click to collapse
i have just modified my EasyRootingToolkit package to make it push the additional files for this workaround...
i havent checked it so it would be great if someone can test it out on windows and let me know...
download the attached file and at STEP2
(the device should be in USB debugging mode for this to work)
just execute the runme.bat and follow the instructions
the device will reboot but just turn off the device after its rebooted
And hope more
Good to see you here Z
Can't it be used on unlock bootloader?
Sent from my LT15i using xda premium
nakchea said:
Can't it be used on unlock bootloader?
Sent from my LT15i using xda premium
Click to expand...
Click to collapse
There's already a option for unlocked BL devices.
Sent from my LT18i using xda premium
dp94 said:
There's already a option for unlocked BL devices.
Sent from my LT18i using xda premium
Click to expand...
Click to collapse
I'm fairly certain that there was not. What are you talking about???
EDIT: Ooops, totally misread this. All good.
iR¡[email protected]!* via Tapatalk
iridaki said:
I'm fairly certain that there was not. What are you talking about???
iR¡[email protected]!* via Tapatalk
Click to expand...
Click to collapse
Unlocked users can just Flash the kernel by Bazoocaze
iridaki said:
I'm fairly certain that there was not. What are you talking about???
iR¡[email protected]!* via Tapatalk
Click to expand...
Click to collapse
ShyamSasi said:
Unlocked users can just Flash the kernel by Bazoocaze
Click to expand...
Click to collapse
Exact that, was were I was talking about.
Sent from my LT18i using xda premium
have posted a windows version for (STEP2) at this post
i have just modified my EasyRootingToolkit package to make it push the additional files for this workaround...
i havent checked it so it would be great if someone can test it out on windows and let me know...
instructions are provided at that post
Thank you, zdzihu. Very usefull. I updated the main thread with a link to this thread.
But now I will have to rewrite my thread about unlocking need hehehe
Thanks
i need for neo , can you help me
need it for neo mt15 too
Working great on Xperia arc build 4.0.2.A.0.42
Thanks a lot man, for the work and all !!
Thank you Zdzihu, Bazoocaze and DooMLoRD for your efforts. Thanks to your combined work my arc is back from its box where I have left it since October.
what about Xperia Neo ? There is a patch for locked bootloaders?
hi, when i am going to use the doomlord .bat the console told me that the adb is out of date and can't change anything
EDIT: found the error, just need to close the flashtool before step2
I did it on windows.Solved the 0% issue.After locking bootlander and flashing step 1 do not try the step 2 root.Instead do the step 3 flashing.Then boot phone turn on DEBUGGING and tick UNKNOWN SOURSES.Then install the step2-DooMLoRD_v4_ROOT-zergRush-busybox-su-batterydriver (1).zip and leave the cmd window on as u switch on the phone and press any key with cmd window on .Rooting takes place as the phone turns on.If u root after the phone has turned on fully, the phone dies in the middle of the root.After that install FuelGaugeFixV16.apk and u will start seeing the actual battery % too.U R DONE.ENSOI-----FROM MAK.Please reply and tell me if it has worked
There is any version of this rom for the Neo (MT15i)
Does this work with ICS
miguelcanas said:
There is any version of this rom for the Neo (MT15i)
Click to expand...
Click to collapse
Goldshot said:
what about Xperia Neo ? There is a patch for locked bootloaders?
Click to expand...
Click to collapse
Kuter_tm said:
need it for neo mt15 too
Click to expand...
Click to collapse
itachi naruto said:
i need for neo , can you help me
Click to expand...
Click to collapse
anyone else?
Guys,
Can anyone tell what's the latest custom build of turbo 's stock Rom, if any. Mine is "S9311_MP_IN_MMX_15_flasher_user". I found some three versions of the stock ROM in a thread. If there is any latest build, what is the difference from the old one? Any improvement in battery life or something like that?
Latest original mmx firmware is S9311_MP_IN_MMX_19_flasher_user
Sent from my A250 using Tapatalk
suhas.holla said:
Latest original mmx firmware is S9311_MP_IN_MMX_19_flasher_user
Sent from my A250 using Tapatalk
Click to expand...
Click to collapse
Thanks for the info bro. But why isn't this update showing on my phone. Canvas turbo supports OTA updates right?
It does support OTA updates and it is not showing on my phone also.
Sent from my A250 using XDA Premium 4 mobile app
confused?
hi guys..
in my about phone it says... S9311_MP_IN_MMX_16_flasher_user
Suhas... buddy how did you get S9311_MP_IN_MMX_19_flasher_user ??
is there any way i can get this updated??? ... at service center???
also is any one having a problem with their camera... eg. mine just gies blank... and then i get an error msg "Gallery has stopped" etc?!?!
any tips?
thanx in advance
YO!han
minz76 said:
hi guys..
in my about phone it says... S9311_MP_IN_MMX_16_flasher_user
Suhas... buddy how did you get S9311_MP_IN_MMX_19_flasher_user ??
is there any way i can get this updated??? ... at service center???
also is any one having a problem with their camera... eg. mine just gies blank... and then i get an error msg "Gallery has stopped" etc?!?!
any tips?
thanx in advance
YO!han
Click to expand...
Click to collapse
Get the latest: http://www.needrom.com/mobile/micromax-a250/
hit thanks if i'hv helped.
nice
COOL!!
but tell me something... this is the officially latest release??
have you checked it... is it smooth... no bugs?
do i have to root my phone to flash this Rom?
there isnt any OTA / service center that can provide it? or they havent received this latest Rom?
thanx man
Hi! Tell me does this link provide the official latest version? Have you tried it? please reply.
minz76 said:
COOL!!
but tell me something... this is the officially latest release??
have you checked it... is it smooth... no bugs?
do i have to root my phone to flash this Rom?
there isnt any OTA / service center that can provide it? or they havent received this latest Rom?
thanx man
Click to expand...
Click to collapse
AeshuK said:
Hi! Tell me does this link provide the official latest version? Have you tried it? please reply.
Click to expand...
Click to collapse
Hi,
That is the official update. Tried it for few days only, but i can say that there is no bug at all. and it is smooth also. Didn't noticed the battery life. in the previous build battery drains fast and not sure if the same issue in this build.
No need to root for this update. you can flash this by "SP Flash tool"
tutorials are available in the general section of this forum.
Hit thanks if I've helped.
Are you sure this is the 19_flasher link? Because the download file reads 15_flasher? And how did you use sp flash for canvas turbo? Tell the procedure please!
AeshuK said:
Are you sure this is the 19_flasher link? Because the download file reads 15_flasher? And how did you use sp flash for canvas turbo? Tell the procedure please!
Click to expand...
Click to collapse
http://www.mediafire.com/download/up99dajbr7m643z/MMX_A250_V3.zip
this is link for 19_flasher .... !!!
here is my video tutorial on flashing stock rom !!!!!
Hope it helps !!:good:
great!
thats really nice of you man... will go through it...
So after my phone kept rebooting every now and then.. like 10times a day... Just today the service center guys put "_17_flasher" version...
lets see how it works will keep you guys posted... no nonsense till now atleast!
howz this one though... any bugs.. i mean really bad bugs
thanx
.................. hey man... not able to download it from that link... keeps giving me new pop up windows to entering code identifications... but doesnt download?!?!
Ok so I followed all the steps and installed all the drivers! But the thing is when I connect my phone through usb, the sp tool doesn't recognize it and so the red bar doesn't appear
AeshuK said:
Ok so I followed all the steps and installed all the drivers! But the thing is when I connect my phone through usb, the sp tool doesn't recognize it and so the red bar doesn't appear
Click to expand...
Click to collapse
Which OS you are using?
if windows 8 64 bit, then try this driver and let us know if it works.
http://forum.xda-developers.com/attachment.php?attachmentid=2635340&d=1395069003
Restart system after installing driver.
Hit thanks if i've helped.
I am still on windows XP
AeshuK said:
I am still on windows XP
Click to expand...
Click to collapse
Disable antivirus and try again.
that unchedsm
AeshuK said:
Ok so I followed all the steps and installed all the drivers! But the thing is when I connect my phone through usb, the sp tool doesn't recognize it and so the red bar doesn't appear
Click to expand...
Click to collapse
Hope this drivers will help you as in my case http://www.mediafire.com/download/cypm22rgs2k83ji/MT6577+USB+VCOM+drivers.rar :good:
After flashing will the warranty be valid and is there any harm in flashing the phone?
Sent from my A250 using XDA Premium 4 mobile app
how about the FPS of the latest update the 19_flasher??? still @ 47fps using quadrant benchmark or higher? TIA
some more questions on flashing..
Hello all, i am new to the forum. I went through this thread which answered some of my questions.
I have a few more questions that are still unanswered.
1. If this is official rom why isnt it available in OTA checks? Even the Service centre people are not aware of such a build version.
2. Will my warranty be void if i flash this rom? I believe it shouldnt if this is official rom.
3. I have currently 15-flasher-user and my indoor photos are very grainy. Is this problem solved with 19flasher?
Has anyone been able to root the phone after the Verizon VS9803AA update? I have a G2 that was never rooted. The digitizer failed so I replaced it with an OEM LCD+Digitizer and suddenly the phone can only be used when there is bright light. I went ahead and replaced the light sensor, but it doesn't make a difference. I used an application to check the light sensor and it performs just as my G3. My thought is that the problem is software based.
If I manually reboot into recovery, I get the icon of the android with a red exclamation point. Plugging in the USB and holding the volume up does not bring me to download mode, it just displays the battery charge. Did Verizon successfully block the ability to root?
I'm having the same problem with not being able to root I've used IORoot which isn't compatible with lollipop, avicoh one click and . bat which get up to rebooting the phone but ends in an error reading "The system was unable to find the specified registry key or value."
so i read about Injecting root in to system image and then pushing image back to phone. But i haven't seen specifics for the LG G2 have you had any success in rooting the phone with the new VS9803AA Update
The phone as the VS9803AA update and I think it is the cause of the proximity sensor problem. I've read some other posts from people that had rooted and took the update. A different situation, but they have a similar problem. In one of those threads I had read about the bootloader version having changed. It is almost as if Verizon killed the ability to do a recovery on the phone. Nice huh?
Yaemish said:
The phone as the VS9803AA update and I think it is the cause of the proximity sensor problem. I've read some other posts from people that had rooted and took the update. A different situation, but they have a similar problem. In one of those threads I had read about the bootloader version having changed. It is almost as if Verizon killed the ability to do a recovery on the phone. Nice huh?
Click to expand...
Click to collapse
Nice wouldnt be the adjective but if the bootloader is different is it possible to extract it and build a root with the new bootloader.
I am new to this however i'm a quick study and have rooted devices in the past ( manually ) I'm just not a developer so there has to be some one working on this right?
In the meantime is it possible to flash an older firmware I'm scared to try with out knowing for certain.
I too am trying to root the VS9803AA with IOroot and it says there is not yet an unlock for this version. I am very frustrated.
EDIT: I did discover how to root! I used the tool found here.
Now if I can figure out something to replace FreeGee, which does not work with AA...
ianwriting said:
I too am trying to root the VS9803AA with IOroot and it says there is not yet an unlock for this version. I am very frustrated.
EDIT: I did discover how to root! I used the tool found here.
Now if I can figure out something to replace FreeGee, which does not work with AA...
Click to expand...
Click to collapse
So the link uses avicoh one click which is what gave me the error its the last thing i tried are you sure you had a stock version of the VS9803AA?
because it still gives me the error...
doorman.jm said:
So the link uses avicoh one click which is what gave me the error its the last thing i tried are you sure you had a stock version of the VS9803AA?
because it still gives me the error...
Click to expand...
Click to collapse
I'm sure it was stock, because this is the first time I've ever tried to root and I did check the software version (VS9803AA) and it said, "Official." Now it says, "Modified."
My original goal in doing all of this was to open up the T-Mobile bands so I can have LTE again. Just left Verizon. But the youtube tutorial I was watching asks me to use FreeGee and it just is not compatible with 3AA as far as I can tell.
To root: webtrickz.com/how-to-root-lg-g2-running-lollipop-with-lg-one-click-root/
To flash TWRP: play.google.com/store/apps/details?id=b007.autorecvs980
I haven't tried AutoRec yet, but a review says it works for the 3AA.
Hope this helps, let me know!
ianwriting said:
I'm sure it was stock, because this is the first time I've ever tried to root and I did check the software version (VS9803AA) and it said, "Official." Now it says, "Modified."
My original goal in doing all of this was to open up the T-Mobile bands so I can have LTE again. Just left Verizon. But the youtube tutorial I was watching asks me to use FreeGee and it just is not compatible with 3AA as far as I can tell.
Click to expand...
Click to collapse
Hay there,
Use kingroot the easiest way to root lg g2 without any trouble, try it and let me know thanks
I'm in the same boat - got this Verizon LG G2 from my sister fixed the LCD screen because the digitizer had dead spots. Can't root tried every method I could find and Verizon appears to have patched any working exploits. Also have the same oversensitive proximity sensor. Great job Verizon!!!
UPDATE:
I have root finally! Flash the prior software version 39a as I was not able to get anywhere with 39aa. Used Kingroot to obtain root and installed recovery!!! I installed Xposed and adjusted the values for the proximity and light sensors so that is no longer an issue also.
Suleman bashir said:
Hay there,
Use kingroot the easiest way to root lg g2 without any trouble, try it and let me know thanks
Click to expand...
Click to collapse
Hi, I used king root so many times and failed but yesterday after reading your post I thought to give another try. And it worked successful this time. They updated the root method for LG. Anyways Huge thanks dear!! Regards.
Sent from my VS980 4G using Tapatalk
Furqan Ullah said:
Hi, I used king root so many times and failed but yesterday after reading your post I thought to give another try. And it worked successful this time. They updated the root method for LG. Anyways Huge thanks dear!! Regards.
Sent from my VS980 4G using Tapatalk
Click to expand...
Click to collapse
You are always welcome dear
Suleman bashir said:
You are always welcome dear
Click to expand...
Click to collapse
One issue I m facing. I want to use Hotspot so I replace the Hotspot provision file with the updated mod provided by some one in another thread. But I m facing issues after doing all the stuff. Do u have any idea about that?
Sent from my VS980 4G using Tapatalk
Furqan Ullah said:
One issue I m facing. I want to use Hotspot so I replace the Hotspot provision file with the updated mod provided by some one in another thread. But I m facing issues after doing all the stuff. Do u have any idea about that?
Sent from my VS980 4G using Tapatalk
Click to expand...
Click to collapse
Hi mate,
I have used the method from this link that fix my problem i hope yours too give it a try n let me know
http://www.droidviews.com/how-to-enable-wifi-tethering-on-verizon-lg-g2-vs980/
Suleman bashir said:
Hi mate,
I have used the method from this link that fix my problem i hope yours too give it a try n let me know
http://www.droidviews.com/how-to-enable-wifi-tethering-on-verizon-lg-g2-vs980/
Click to expand...
Click to collapse
Thanks for your reply. I will try and let you know. Regards
Sent from my VS980 4G using Tapatalk
---------- Post added at 07:45 PM ---------- Previous post was at 07:29 PM ----------
Suleman bashir said:
Hi mate,
I have used the method from this link that fix my problem i hope yours too give it a try n let me know
http://www.droidviews.com/how-to-enable-wifi-tethering-on-verizon-lg-g2-vs980/
Click to expand...
Click to collapse
Man u r great. My another problem is resolved. Hotspot is now working. Sometimes a message appears that you cannot use Hotspot as Verizon sim is not detected. But when I switch three or four times on and off, the Hotspot enabled. Huge thanks.
One more question, I want to install custom recovery? Which is suitable for 39A? Thanks in advance. [emoji4] [emoji4]
Sent from my VS980 4G using Tapatalk
Furqan Ullah said:
Thanks for your reply. I will try and let you know. Regards
Sent from my VS980 4G using Tapatalk
---------- Post added at 07:45 PM ---------- Previous post was at 07:29 PM ----------
Man u r great. My another problem is resolved. Hotspot is now working. Sometimes a message appears that you cannot use Hotspot as Verizon sim is not detected. But when I switch three or four times on and off, the Hotspot enabled. Huge thanks.
One more question, I want to install custom recovery? Which is suitable for 39A? Thanks in advance. [emoji4] [emoji4]
Sent from my VS980 4G using Tapatalk
Click to expand...
Click to collapse
Ok now go to playstore and type "autorec" in searchbar and select correct varient of your mobile and in in your case select vs980 if you are using verizon mobile . install it and follow the simple instruction and volla there you go you have successfully installed twrp recovery the best of all
Suleman bashir said:
Ok now go to playstore and type "autorec" in searchbar and select correct varient of your mobile and in in your case select vs980 if you are using verizon mobile . install it and follow the simple instruction and volla there you go you have successfully installed twrp recovery the best of all
Click to expand...
Click to collapse
I m extremely thankful to you for all your help. I successfully installed TWRP as per your guidance using autorec. Thanks alot.
Now what do u suggest about custom rom? Should I go for cynagenmod Marshmallow?
Sent from my VS980 4G using Tapatalk
Furqan Ullah said:
I m extremely thankful to you for all your help. I successfully installed TWRP as per your guidance using autorec. Thanks alot.
Now what do u suggest about custom rom? Should I go for cynagenmod Marshmallow?
Sent from my VS980 4G using Tapatalk
Click to expand...
Click to collapse
Furqan honestly i will not suggest you cynogenmod M . its in the development stage and i will not recommend it for the daily driver , im also waiting for its final stable release , then i can say something ,
Im just happy with stock
Suleman bashir said:
Furqan honestly i will not suggest you cynogenmod M . its in the development stage and i will not recommend it for the daily driver , im also waiting for its final stable release , then i can say something ,
Im just happy with stock
Click to expand...
Click to collapse
My stock is too much laggy. I used cyanogen for my S3 and it was working wonderful. I was using lollipop for my S3. That was stable, fast and was packed with features. The LG G2 rom is dead slow. Thanks Suleman for your time and valuable comments.
Sent from my VS980 4G using Tapatalk
Furqan Ullah said:
My stock is too much laggy. I used cyanogen for my S3 and it was working wonderful. I was using lollipop for my S3. That was stable, fast and was packed with features. The LG G2 rom is dead slow. Thanks Suleman for your time and valuable comments.
Sent from my VS980 4G using Tapatalk
Click to expand...
Click to collapse
Im not saying its bad to flash i personally recommend it to you but in stable form ,as it has bugs and in development stage n one more thing if you are camera lover then cynogenmod cam sucks your expectations , stock cam is far way better than this . if you really interested to flash something then go for xdabbes rom which is stock based , search the forum and you will get that,
Good luck
Security Update & Factory Image for the Google Nexus 5 here.
Anyone can create a twrp zip file? I don't have time for flashing image files and I would be glad for that.
slimshady34 said:
Anyone can create a twrp zip file? I don't have time for flashing image files and I would be glad for that.
Click to expand...
Click to collapse
What about using FlashFire?
slimshady34 said:
Anyone can create a twrp zip file? I don't have time for flashing image files and I would be glad for that.
Click to expand...
Click to collapse
work on multirom MMB29X.zip
https://mega.nz/#!uxwxDAzD!pAXSOKb5idn2Jv4xF6_rBNpKy7-qeoK_x9DkJgujArU
Anybody have any ideea how to root this firmware? i tried with beta version of supersu by manually flashing in twrp then i got bootloops ..
Try with phhs method , work for me .
Sent from my Nexus 5 using XDA-Developers mobile app
Thanks for the te help but .. what on earth is phhs method ? i dont know all the abbreviations ..
Look at brecktheboulay thread, second post.
Sent from my Nexus 5 using XDA-Developers mobile app
Sorry , but I don't understand what do you mean by looking at the brecktheboulay thread , I could not find any user with that name .
Brecktheboulay in development
Sent from my Nexus 5 using XDA-Developers mobile app
Thank you but i can't still find that thread , can you give me a link please when you can because as i said , i find nothing when i search ..
BlackVader said:
Thank you but i can't still find that thread , can you give me a link please when you can because as i said , i find nothing when i search ..
Click to expand...
Click to collapse
I think I found the thread/post he is referring to. Here is the 2nd post from the user and mentions the phhs super user.
You can find the link HERE
Thank you Pedro ,I see , but some users don't say is compatible with Nexus 5 and I don't want to reflash everything back .. If any of you guys have something exact to work with this version let me know please! Thanks in addvance
Sent from my Nexus 5 using XDA-Developers mobile app
EDIT:
I think i found something for the MMB29X that will work ,but the following question appears , if anything from here will work , the question will be , wich one will ? ..
https://superuser.phh.me/nexus/hammerhead/MMB29X/
Any idea what this fixes and/or whether it introduces any problems? Seems like I just got settled down with "v".
philipped346 said:
work on multirom MMB29X.zip
https://mega.nz/#!uxwxDAzD!pAXSOKb5idn2Jv4xF6_rBNpKy7-qeoK_x9DkJgujArU
Click to expand...
Click to collapse
Thank you bro
BlackVader said:
Anybody have any ideea how to root this firmware? i tried with beta version of supersu by manually flashing in twrp then i got bootloops ..
Click to expand...
Click to collapse
Flashing SuperSU Beta 2.71 worked for me.
http://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
ThrowingKs said:
Flashing SuperSU Beta 2.71 worked for me.
http://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
Click to expand...
Click to collapse
I tried to use 2.71 beta , i got bootloops over bootloops .. can't wait to find something that will work properly ..
BlackVader said:
I tried to use 2.71 beta , i got bootloops over bootloops .. can't wait to find something that will work properly ..
Click to expand...
Click to collapse
SuperSU beta 2.71 worked for me.
Flashed with twrp 3.0.2
bbb18c1 said:
SuperSU beta 2.71 worked for me.
Flashed with twrp 3.0.2
Click to expand...
Click to collapse
I did exactly the same thing as you did too but nothing , as i said , bootloops on bootloops -.-
slimshady34 said:
Anyone can create a twrp zip file? I don't have time for flashing image files and I would be glad for that.
Click to expand...
Click to collapse
You know flashing image files only takes less than 5 minutes are you that busy or that lazy [emoji12]
Sent from my Nexus 5 using XDA-Developers mobile app
---------- Post added at 07:31 AM ---------- Previous post was at 07:13 AM ----------
BlackVader said:
I tried to use 2.71 beta , i got bootloops over bootloops .. can't wait to find something that will work properly ..
Click to expand...
Click to collapse
Take a look at following posts if there is something that can help you, most of the time installing Supersu must be super simple. Don't know why it is not working for you. Maybe if you tell more explicit what you did exactly we could help you out
http://forum.xda-developers.com/showthread.php?p=65630672
http://forum.xda-developers.com/showthread.php?p=65516562
Sent from my Nexus 5 using XDA-Developers mobile app
Hi guys
I am yashraj yadav and today i want to talk about rooting oppo a37f and installing supersu
Just go to this link and watch the full tutorial language is English :-
https://youtu.be/jC7xu6LLH3s
:::::::::::::Update::::::::::
For rooting oppo a37f's latest version of 22/05/17 or downgrading it refer to this video language is English :-
https://youtu.be/z_iAmGj5jZw
Sorry bad english
Hit thanks if you are happy :laugh:
https://forum.xda-developers.com/android/development/twrp-3-1-1-0oppo-a37-t3629665
how to downgrade A37f170522ex_11_A.22_170522. I tried downgrading but it results a dead phone. Only repeated vibration.
regards,
ace
ace_venturia said:
how to downgrade A37f170522ex_11_A.22_170522. I tried downgrading but it results a dead phone. Only repeated vibration.
regards,
ace
Click to expand...
Click to collapse
Bro try this method :-
Sent from my OPPO A37f using XDA Labs
Yashraj22 said:
Bro try this method :-
Sent from my OPPO A37f using XDA Labs
Click to expand...
Click to collapse
Tried same result....
ace_venturia said:
Tried same result....
Click to expand...
Click to collapse
Did you properly put your phone to download mode by pressing both vol+ & vol- button at same time after powering off
Yashraj22 said:
Did you properly put your phone to download mode by pressing both vol+ & vol- button at same time after powering off
Click to expand...
Click to collapse
I meant after flashing with that procedure the flashing is complete resulting a dead handset. The handset then goes to repeated vibration as of startup failure.
you can try downgrading by by searching for the old update file and flashing directly by phone kingo root works on that version
Sent from my A37f using Tapatalk
ace_venturia said:
how to downgrade A37f170522ex_11_A.22_170522. I tried downgrading but it results a dead phone. Only repeated vibration.
regards,
ace
Click to expand...
Click to collapse
I have the same problem and solved. But i cant post the link cause i'm new user on xda.
How
bavet said:
I have the same problem and solved. But i cant post the link cause i'm new user on xda.
Click to expand...
Click to collapse
Did you reflashed the rom using pc
Yashraj22 said:
Did you reflashed the rom using pc
Click to expand...
Click to collapse
Yes, I have the firmware
bavet said:
I have the same problem and solved. But i cant post the link cause i'm new user on xda.
Click to expand...
Click to collapse
can you pm me the link?
Yashraj22 said:
Did you reflashed the rom using pc
Click to expand...
Click to collapse
Yes, I flash with pc
bavet said:
Yes, I flash with pc
Click to expand...
Click to collapse
bro would you send me the link? i got those problem too when downggrading using this method,thx btw
Followed your instructions in details and result in vibrate-only..
Tried on OS v07, v10, v13..
Every time I got deadboot, I revive it, and again and again..
die try..
Any advice(s)?
It seem this phone can't be downgrade..
This method is for oppo a37f dont try it on other devices
is there any possibility on rooting it without downgrading?i dont have pc so i would like to get a 1click rooting app if there is.
new
Sir i have updated oppo a37f.
And king root and kingo root not works on my phone.
And i dont have any computer .so how can i root my phone..plz sir rply as soon as possible.
akashriya said:
Sir i have updated oppo a37f.
And king root and kingo root not works on my phone.
And i dont have any computer .so how can i root my phone..plz sir rply as soon as possible.
Click to expand...
Click to collapse
No way, just keep waiting for Kingroot
Thank u so much it worked.
Ive rooted my device n now want to install a custom rom. I searched the internet and couldn't find any. Are there custom roms for oppo a37f??