Database Develop

Magisk with CM13 and Xposed

Hello guys. I'm tempted to install Magisk on my Zenfone 2 ZE551ML. I have the latest CM13 Nightly + Xposed and I want to ask if Magisk has any problem running alongside these two.
Another question is if I can still use the built in CM13 root.
Thanks for your answers!

Im running on CM 13 (ZenFone 2 Laser ZOOL) stable and it works fine.
The only problem is that with xposed active the safetynet check don't pass. But its just a matter of disabling xposed and rebooting when necessary.
I dont know if the differences are too significant, but hope it helps.

FHC1998 said:
Im running on CM 13 (ZenFone 2 Laser ZOOL) stable and it works fine.
The only problem is that with xposed active the safetynet check don't pass. But its just a matter of disabling xposed and rebooting when necessary.
I dont know if the differences are too significant, but hope it helps.
Click to expand...
Click to collapse
That means Magisk doesn't work with Xposed ? Or I just have to unninstall Xposed and then install again after installing Magisk ?

PedroCaseiro said:
That means Magisk doesn't work with Xposed ? Or I just have to unninstall Xposed and then install again after installing Magisk ?
Click to expand...
Click to collapse
Magisk itself works perfectly with Xposed installed, only Magisk Hide that doesn't hide Xposed.
So if you don't plan on using any app that checks Safety Net (Pokemon Go, Android Pay, for example) You won't have any problem.

FHC1998 said:
Magisk itself works perfectly with Xposed installed, only Magisk Hide that doesn't hide Xposed.
So if you don't plan on using any app that checks Safety Net (Pokemon Go, Android Pay, for example) You won't have any problem.
Click to expand...
Click to collapse
and what about the built in CM13 root ?

I think the newest Magisk auto removes it when you flash it.
But I had manually removed before installing magisk on mine.
But in any case, if I remember correctly you can just remove it thru the SuperSU app before flashing Magisk.

FHC1998 said:
I think the newest Magisk auto removes it when you flash it.
But I had manually removed before installing magisk on mine.
But in any case, if I remember correctly you can just remove it thru the SuperSU app before flashing Magisk.
Click to expand...
Click to collapse
I'll try it then and hope not to **** up my phone. Thanks
Sent from my Asus ZenFone 2 using XDA Labs

PedroCaseiro said:
I'll try it then and hope not to **** up my phone. Thanks
Click to expand...
Click to collapse
No problem. Just remember to make a nandroid backup first if you are worried.

[SOLVED]Modules not working 14.3/14.0

Modules work one time after reboot stop working
Rom RR 7.1.0
Nexus 6p

Everything looks fine in your log. Unless you really need it though, I'd recommend removing the Universal SafetyNet Fix module. It replaces Magisk internal busybox with one that might cause issues... Better to use the resetprop tool to change the device fingerprint to the stock 6P one of you can't pass SafetyNet on that ROM.
What is it that doesn't work? Details, please...

Didgeridoohan said:
Everything looks fine in your log. Unless you really need it though, I'd recommend removing the Universal SafetyNet Fix module. It replaces Magisk internal busybox with one that might cause issues... Better to use the resetprop tool to change the device fingerprint to the stock 6P one of you can't pass SafetyNet on that ROM.
What is it that doesn't work? Details, please...
Click to expand...
Click to collapse
injected youtube models
Fix mic

Didgeridoohan said:
Everything looks fine in your log. Unless you really need it though, I'd recommend removing the Universal SafetyNet Fix module. It replaces Magisk internal busybox with one that might cause issues... Better to use the resetprop tool to change the device fingerprint to the stock 6P one of you can't pass SafetyNet on that ROM.
What is it that doesn't work? Details, please...
Click to expand...
Click to collapse
Ans this msg show up after every reboot

hk48 said:
injected youtube models
Fix mic
Click to expand...
Click to collapse
That's not very detailed...
hk48 said:
Ans this msg show up after every reboot
Click to expand...
Click to collapse
That's not a Magisk issue. You have to match the vendor image with the system image. It even tells you what factory image to get the file from.

Modules not working 14.3/14.0
Modules work one time after reboot stop working
Rom RR 7.1.0
Nexus 6p
Click to expand...
Click to collapse
HI.. I have the same issues last days - then i tried to use an other Kernel that have Magisk integratet! Since that all fine (mostly) !!
Here the link to my thread about - in it you can found the link to the Kernel with Magisk...
https://forum.xda-developers.com/apps/magisk/problem-module-install-lost-root-galaxy-t3703398
I hope that fix your issues...
Greetz...

Didgeridoohan said:
That's not very detailed...
That's not a Magisk issue. You have to match the vendor image with the system image. It even tells you what factory image to get the file from.
Click to expand...
Click to collapse
That one I check it
Sent from my Nexus 6P using Tapatalk

n82freak said:
HI.. I have the same issues last days - then i tried to use an other Kernel that have Magisk integratet! Since that all fine (mostly) !!
Here the link to my thread about - in it you can found the link to the Kernel with Magisk...
https://forum.xda-developers.com/apps/magisk/problem-module-install-lost-root-galaxy-t3703398
I hope that fix your issues...
Greetz...
Click to expand...
Click to collapse
I will try it and hope work، thanks [emoji846]
Sent from my Nexus 6P using Tapatalk

hk48 said:
That one I check it
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
You made it sound like no modules work...
If it's only specific modules are troublesome, ask for help in the specific module threads. With lots of details about what doesn't work and don't forget to include logs.

Didgeridoohan said:
You made it sound like no modules work...
If it's only specific modules are troublesome, ask for help in the specific module threads. With lots of details about what doesn't work and don't forget to include logs.
Click to expand...
Click to collapse
Yes، all modules not working but in magisk shows modules work but when i use every module nothing work like im use the original app، hope i got that clear [emoji20]
Sent from my Nexus 6P using Tapatalk

hk48 said:
Yes، all modules not working but in magisk shows modules work but when i use every module nothing work like im use the original app، hope i got that clear [emoji20]
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
Ok. We need to clear things up....
I see you have a whole bunch of modules installed and like I said, your log looks good. But when asked for details you only mentioned iYTBP and Android mic fix as not working. This is where I would like some details. How do you know that the modules don't work? What have you tested? What is the expected behaviour and what are you seeing?
Let's start with something that's easy to test: busybox. Open a terminal emulator and type busybox. If nothing happens, run the command as su. Does it show a list of all the applets available?

Didgeridoohan said:
Everything looks fine in your log. Unless you really need it though, I'd recommend removing the Universal SafetyNet Fix module. It replaces Magisk internal busybox with one that might cause issues... Better to use the resetprop tool to change the device fingerprint to the stock 6P one of you can't pass SafetyNet on that ROM.
What is it that doesn't work? Details, please...
Click to expand...
Click to collapse
If i remove universal safetynet fix module i got fules pass[emoji34] so resetprop tool fix that ??
I search for resetprop tool and got nothing can u pls give a like for that، i know im ask to much [emoji28]
Sent from my Nexus 6P using Tapatalk

Didgeridoohan said:
Ok. We need to clear things up....
I see you have a whole bunch of modules installed and like I said, your log looks good. But when asked for details you only mentioned iYTBP and Android mic fix as not working. This is where I would like some details. How do you know that the modules don't work? What have you tested? What is the expected behaviour and what are you seeing?
Let's start with something that's easy to test: busybox. Open a terminal emulator and type busybox. If nothing happens, run the command as su. Does it show a list of all the applets available?
Click to expand...
Click to collapse
Use all modules not work،
I install the module ok then i go test it nothing happen..
Like utube first i download the the module iytbp and first time work perfect also fix mic and jamesDSP module for better sound work all perfect but after second time reboot all modules show in magisk but when i test every modules not working like i dont have any modules there [emoji36]
Sent from my Nexus 6P using Tapatalk

hk48 said:
If i remove universal safetynet fix module i got fules pass[emoji34] so resetprop tool fix that ??
I search for resetprop tool and got nothing can u pls give a like for that، i know im ask to much [emoji28]
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
The resetprop tool is a part of Magisk. I've written a bit about in the troubleshooting guide (start under "Matching official prop values to pass SafetyNet").
hk48 said:
Use all modules not work،
I install the module ok then i go test it nothing happen..
Like utube first i download the the module iytbp and first time work perfect also fix mic and jamesDSP module for better sound work all perfect but after second time reboot all modules show in magisk but when i test every modules not working like i dont have any modules there [emoji36]
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
Those screenshots clearly show that the busybox module is working so things are Magic Mounting as they should. How do you test the modules?

Didgeridoohan said:
The resetprop tool is a part of Magisk. I've written a bit about in the troubleshooting guide (start under "Matching official prop values to pass SafetyNet").
Those screenshots clearly show that the busybox module is working so things are Magic Mounting as they should. How do you test the modules?
Click to expand...
Click to collapse
By use there effect app like module iytbp i check the utube work like normal utube، and jumesDSP module i use there app and not see any change when i switch things..
… ..
After besybox imgs i send is that should told u everything is running??? U dont see anything wrong [emoji47][emoji47][emoji47]
Sent from my Nexus 6P using Tapatalk

hk48 said:
By use there effect app like module iytbp i check the utube work like normal utube، and jumesDSP module i use there app and not see any change when i switch things..
… ..
After besybox imgs i send is that should told u everything is running??? U dont see anything wrong [emoji47][emoji47][emoji47]
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
The busybox screenshots do tell me that everything is working as it should.
The iYTBP Youtube app looks just like the normal Youtube (unless you use the black themed version). It removes ads and brings background playback to the app. If you're seeing ads it might be because you didn't uninstall updates for the stock Youtube app or you let it update through the Play store (you should disable updates for Youtube when using this module).
The audio module might simply be incompatible with your device or you may have another audio mod that is conflicting. Ask for advice in the module support thread.

Didgeridoohan said:
Everything looks fine in your log. Unless you really need it though, I'd recommend removing the Universal SafetyNet Fix module. It replaces Magisk internal busybox with one that might cause issues... Better to use the resetprop tool to change the device fingerprint to the stock 6P one of you can't pass SafetyNet on that ROM.
What is it that doesn't work? Details, please...
Click to expand...
Click to collapse
Didgeridoohan said:
The busybox screenshots do tell me that everything is working as it should.
The iYTBP Youtube app looks just like the normal Youtube (unless you use the black themed version). It removes ads and brings background playback to the app. If you're seeing ads it might be because you didn't uninstall updates for the stock Youtube app or you let it update through the Play store (you should disable updates for Youtube when using this module).
The audio module might simply be incompatible with your device or you may have another audio mod that is conflicting. Ask for advice in the module support thread.
Click to expand...
Click to collapse
What can i say، when u say disable update ? the only thing i dont check it is update im really sorry for wist ur time oh god i feel so ?? for not check that before post ???
For iytbp module now work fine
And another modules i will check one by one، dont worry i will not wist ur time like that ،،
Im really sorry.
Have a good day sir

Emirates App - Not working with XPOSED

So I know this issue is because of XPOSED, but I would like to know if anyone else is experiencing this issue. Basically the Emirates App just blacks out or crashes when XPOSED is installed, I tried uninstalling XPOSED on Magisk and the app worked again, but as soon as I installed XPOSED again it just stopped working. Can anyone confirm this? This issue didn't exist about half a year ago.

So no one else?

yanniclord said:
So no one else?
Click to expand...
Click to collapse
yes, I can confirm this - I even tried to hide the Emirates App with Magisk - no luck

bhammler said:
yes, I can confirm this - I even tried to hide the Emirates App with Magisk - no luck
Click to expand...
Click to collapse
Oh thank god, so it isn't just me then, thought my Phone was bugged in some way (and/or Tablet).

@topjohnwu This seems to be an issue with Magisk Hiding, could you take a look at it?

yanniclord said:
@topjohnwu This seems to be an issue with Magisk Hiding, could you take a look at it?
Click to expand...
Click to collapse
Magisk can't hide Xposed. The best you can do is to disable the Xposed Magisk module when you need to use the app, or try with the No Device Check Xposed module (it can fake a ctsProfile pass).

Didgeridoohan said:
Magisk can't hide Xposed. The best you can do is to disable the Xposed Magisk module when you need to use the app, or try with the No Device Check Xposed module (it can fake a ctsProfile pass).
Click to expand...
Click to collapse
Oh I didn't know about the last module you mentioned there, awesome. But the problem isn't just XPOSED, it is Magisk as well, as long as I have them installed, the Emirates App doesn't work for me. Does it work for you? (Try with/without XPOSED if you can to confirm for me, need more testers).

yanniclord said:
Oh I didn't know about the last module you mentioned there, awesome. But the problem isn't just XPOSED, it is Magisk as well, as long as I have them installed, the Emirates App doesn't work for me. Does it work for you? (Try with/without XPOSED if you can to confirm for me, need more testers).
Click to expand...
Click to collapse
If it's an issue with Magisk you're in the wrong forum.
And I can start the app just fine with Magisk installed, without even adding it to MagiskHide or hiding the Manager. I don't think it has an issue with Magisk.
I'm not going to install Xposed just for that...

Magisk Tez Users - Error recently due to Google

I am getting error on my tez app, due to my Google play I think so.. it has started recently... Please anyone help me

Tez App is not working Now... As i Have installed Magisk And the root is enabled,but the Tez App is showing my device is rooted. please help me..!! I Need a Solution Very Fast.. if anyone can help me ... please reply for this

gokulraj3 said:
I am getting error on my tez app, due to my Google play I think so.. it has started recently... Please anyone help me
Click to expand...
Click to collapse
Everyone facing this. Looks like we will have to wait for either magisk to update or some tez trick
Sent from my Redmi Note 5 using Tapatalk

gokulraj3 said:
Tez App is not working Now... As i Have installed Magisk And the root is enabled,but the Tez App is showing my device is rooted. please help me..!! I Need a Solution Very Fast.. if anyone can help me ... please reply for this
Click to expand...
Click to collapse
hey bro,
try using this module
https://forum.xda-developers.com/apps/magisk/module-magiskhide-props-config-t3789228
and then, report if you still facing any problems. :good:
Happy to help

hackiee said:
hey bro,
try using this module
https://forum.xda-developers.com/apps/magisk/module-magiskhide-props-config-t3789228
and then, report if you still facing any problems. :good:
Happy to help
Click to expand...
Click to collapse
That module won't do anything for fooling Tez. Unless the issue is that SafetyNet's ctsProfile is false while basicIntegrity is true...

Didgeridoohan said:
That module won't do anything for fooling Tez. Unless the issue is that SafetyNet's ctsProfile is false while basicIntegrity is true...
Click to expand...
Click to collapse
Which it is not
SN passes but tez is now detecting something

Didgeridoohan said:
That module won't do anything for fooling Tez. Unless the issue is that SafetyNet's ctsProfile is false while basicIntegrity is true...
Click to expand...
Click to collapse
Improved hiding - editing prop files
Often, it's easy to circumvent root detection, but in some rare instances apps (mainly banking apps) go that extra distance. These apps might look at the actual prop values written in build.prop and default.prop rather than the loaded values. This module can hide that. For more details, check out the documentation on GitHub.
quoted from the same module bro, Check it. :fingers-crossed:
I am using Tez successfully with magisk and even with Xposed.
Check SS.

hackiee said:
Improved hiding - editing prop files
Often, it's easy to circumvent root detection, but in some rare instances apps (mainly banking apps) go that extra distance. These apps might look at the actual prop values written in build.prop and default.prop rather than the loaded values. This module can hide that. For more details, check out the documentation on GitHub.
quoted from the same module bro, Check it. :fingers-crossed:
I am using Tez successfully with magisk and even with Xposed.
Check SS.
Click to expand...
Click to collapse
This module not working anymore. I already tested it on few roms. Tez Still not working. Safety net passes but tez doesn't work. Btw this module is for passing safetynet. Not to help with those apps which you are describing. It wil only help with those apps which just rely on normal safetynet passing. Other stuff or apps. We need to figure out ourselves
Sent from my Redmi Note 5 Pro using Tapatalk

hackiee said:
quoted from the same module bro, Check it. :fingers-crossed:
Click to expand...
Click to collapse
I have checked it. Hint: compare user names...
I am using Tez successfully with magisk and even with Xposed.
Check SS.
Click to expand...
Click to collapse
I seriously doubt it's because of the mentioned module above...
But, if you'd describe your method for using Tez I'm sure there are a whole bunch of users that would be interested to know.

Kapiljhajhria said:
This module not working anymore. I already tested it on few roms. Tez Still not working. Safety net passes but tez doesn't work. Btw this module is for passing safetynet. Not to help with those apps which you are describing. It wil only help with those apps which just rely on normal safetynet passing. Other stuff or apps. We need to figure out ourselves
Sent from my Redmi Note 5 Pro using Tapatalk
Click to expand...
Click to collapse
Bro, check my screenshots. I am with xposed framework. So, SN doesn't pass. But, my tez app and other apps are not detecting root coz of that module.
And I am saying this coz before that module, I was facing same problems in Paytm, Tez, etc. even though i had used magisk hide on those apps at that time. But, believe me or not after using this module's "Improved hiding" feature they are not detecting my root. :laugh:
Check out my Root beer's tests before and after magisk hide with that module's improved hiding.
I can't justify more, try yourself.

hackiee said:
Check out my Root beer's tests before and after magisk hide with that module's improved hiding.
I can't justify more, try yourself.
Click to expand...
Click to collapse
Seriously? That's the only thing you've done? Activated the "Improved hiding" of MagiskHide Props Config? Hm...

hackiee said:
Bro, check my screenshots. I am with xposed framework. So, SN doesn't pass. But, my tez app and other apps are not detecting root coz of that module.
And I am saying this coz before that module, I was facing same problems in Paytm, Tez, etc. even though i had used magisk hide on those apps at that time. But, believe me or not after using this module's "Improved hiding" feature they are not detecting my root. :laugh:
Check out my Root beer's tests before and after magisk hide with that module's improved hiding.
I can't justify more, try yourself.
Click to expand...
Click to collapse
Dude can you share more details pls..let's see if it works
What did you do? Just flashed the module? Any extra commands or change specific props?
Are you using the tez hider mod as well? Or in other words have you disabled telephone perms from play services?
Have you tried re registering? In the last 2 days or so? Does it work?

Didgeridoohan said:
I have checked it. Hint: compare user names...
Click to expand...
Click to collapse
Oh, sorry bro, I didn't noticed you are the developer of the same module I was boasting about
Didgeridoohan said:
I seriously doubt it's because of the mentioned module above...
But, if you'd describe your method for using Tez I'm sure there are a whole bunch of users that would be interested to know.
Click to expand...
Click to collapse
bro, I am not applying some magic tricks It's your module I am using for the purpose of improving of the hideness of magisk root. Hey, plus I am using 1 extra module also "TezHider4Mgisk". But, I really doubt that it is doing that job, coz I tell you what I am using this(TezHider4Mgisk) module like from months & didn't faced problems.
And recently, after the latest update of Tez app, I started facing issue of "Can't authorize app coz of root or custom rom" something like that warning.
Then, I came across your module and after applying your module my Tez was back to work. :laugh:
I don't have any special setup for Tez.
Using these the above mentioned modules as
"TezHider4Mgisk" & "Your module"'s only improved hiding option.
Using magisk hide to hide (I am mentioning only relevant apps)
Tez, Google play store, Google services framework,Phone, Phone & messaging storage, Phone services, & some other payment apps only.
And voila everything as Rock solid. :silly::silly:
And btw, I am on AEX custom rom with my beloved Lenovo P2 , magisk v16 & Tez app updated to latest.
I can provide any more information you want regarding this
Happy to Help :highfive:
---------- Post added at 12:13 AM ---------- Previous post was at 12:11 AM ----------
Didgeridoohan said:
Seriously? That's the only thing you've done? Activated the "Improved hiding" of MagiskHide Props Config? Hm...
Click to expand...
Click to collapse
yes bro, these SS are after magisk hide disabled and enabled for RootBeer.

Didgeridoohan said:
Seriously? That's the only thing you've done? Activated the "Improved hiding" of MagiskHide Props Config? Hm...
Click to expand...
Click to collapse
for me its not working, safetynet passed for my device.
but tez not working

TR!O said:
for me its not working, safetynet passed for my device.
but tez not working
Click to expand...
Click to collapse
I've seen lots of reports of the same nature, that's why I was surprised by @hackiee's claim... I'm still not convinced that it was the "Improved hiding" that did the trick for him, but I can't investigate any further since I don't have any practical way of testing and playing around with Tez.

Didgeridoohan said:
I've seen lots of reports of the same nature, that's why I was surprised by @hackiee's claim... I'm still not convinced that it was the "Improved hiding" that did the trick for him, but I can't investigate any further since I don't have any practical way of testing and playing around with Tez.
Click to expand...
Click to collapse
Pretty sure its something else. I have tried all that already. Not just me but other people as well. It doesn't work
Sent from my Redmi Note 5 Pro using Tapatalk

hackiee said:
I don't have any special setup for Tez.
Using these the above mentioned modules as
"TezHider4Mgisk" & "Your module"'s only improved hiding option.
Using magisk hide to hide (I am mentioning only relevant apps)
Tez, Google play store, Google services framework,Phone, Phone & messaging storage, Phone services, & some other payment apps only.
And voila everything as Rock solid. :silly::silly:
And btw, I am on AEX custom rom with my beloved Lenovo P2 , magisk v16 & Tez app updated to latest.
I can provide any more information you want regarding this
Happy to Help :highfive:
---------- Post added at 12:13 AM ---------- Previous post was at 12:11 AM ----------
yes bro, these SS are after magisk hide disabled and enabled for RootBeer.
Click to expand...
Click to collapse
Are you using xposed? Which modules in xposed? Any root cloak module?

Yeah I tried too. It's not working for me too

Not working here either. Hope someone finds what's actually breaking the tez app even though safety net passes.

It started working for me after disabling ADB.
Can anyone else also confirm that?

SafetyNet (Magisk/EdXposed) Tests Failing After Supposed Server-Side Changes

Discussion Thread
It appears that Google has flipped some sort of switch a few days ago and many people who are rooted with magisk along with the Xposed/EdXposed framework are failing both BasicItegrity and CtsProfile checks.
From Magisk dev topjohnwu:
https://mobile.twitter.com/topjohnwu/status/1245956080779198464
https://mobile.twitter.com/topjohnwu/status/1237830555523149824
https://mobile.twitter.com/topjohnwu/status/1245963069643051009
EdXposed discussion:
https://github.com/ElderDrivers/EdXposed/issues/435

Yup, even my rooted Essential PH-1 is failing, and it's not even a TEE device
Sent from my PH-1 using Tapatalk

Use the Canary Version v0.4.6.3 (4536) of EdXposed and SafetyNet wont fail anmyore.

Did you have a Link vor this Version pls

Kevinkuensken said:
Did you have a Link vor this Version pls
Click to expand...
Click to collapse
Swipe 2 times right in your EdXposed Manager...

I have the same issue on the 7 Pro. SafetyNet is suddenly being tripped, and it stops being tripped if the EdXposed module is disabled/removed. This happened on Saturday, and I hadn't even rebooted. Something has definitely changed on Google's end. I have had no issues with Magisk + EdXposed for months on end.

Hirs_E_Fruit said:
Use the Canary Version v0.4.6.3 (4536) of EdXposed and SafetyNet wont fail anmyore.
Click to expand...
Click to collapse
I cant find 4536 version there. Can you share file link?

Hirs_E_Fruit said:
Use the Canary Version v0.4.6.3 (4536) of EdXposed and SafetyNet wont fail anmyore.
Click to expand...
Click to collapse
Thanks! I can confirm that switching to the current Canary Build (4542) fixed the SafetyNet issue. Whatever Google silently pushed has been resolved.
Marvelous. Now I can play Pokémon GO
---------- Post added at 03:54 AM ---------- Previous post was at 03:53 AM ----------
satyajeetb said:
I cant find 4536 version there. Can you share file link?
Click to expand...
Click to collapse
Just update to the latest Canary Build. Any newer version will also pass Safety Net.

Or you could just used a magisk module to pass safety net like before.

xdg4y said:
Or you could just used a magisk module to pass safety net like before.
Click to expand...
Click to collapse
This failure to pass SafetyNet is for EdXposed users. Neither any Magisk module nor any Xposed module (i.e. HiddenCore) will resolve the issue. You can get the SafetyNet test seemingly passed in Magisk at best, but Google Pay and Pokémon GO would not work.
Updating to the newer EdXposed builds is the only way to truly resolve the issue after whatever update Google pushed on the back-end.

Which module are you referring to? I don't have edxposed installed on my phone, and it's failing to pass safetynet with just magisk installed
Sent from my PH-1 using Tapatalk

aenews said:
This failure to pass SafetyNet is for EdXposed users. Neither any Magisk module nor any Xposed module (i.e. HiddenCore) will resolve the issue. You can get the SafetyNet test seemingly passed in Magisk at best, but Google Pay and Pokémon GO would not work.
Updating to the newer EdXposed builds is the only way to truly resolve the issue after whatever update Google pushed on the back-end.
Click to expand...
Click to collapse
Funny how you try to tell me this doesn't work when I'm using it with it working now just like the people of this site to ride a high horse and always think they are right either because they can't set something up or just doesn't work for them just assumptions without any real evidence but whatever you guys do it the hard way I'll be here laughing.

Pokemon go works just fine. I never even play this game but i just installed it right now for you. Hid it in magisk and it works right away!!

xdg4y said:
Pokemon go works just fine. I never even play this game but i just installed it right now for you. Hid it in magisk and it works right away!!
Click to expand...
Click to collapse
What Magisk module are you using? You have the 7 Pro with both Magisk and EdXposed, right?
Yes. I always have the annoying apps hidden in Magisk and EdXposed. It has been fine since January/February. Google pushed some update on the back-end and/or some Google apps silently updated. Even though I hadn't rebooted my phone in some time, SafetyNet was suddenly broken a few days ago. It worked again if EdXposed was disabled, but no Magisk/EdXposed modules I have tried resolved SafetyNet being tripped with EdXposed active. Was only able to fix it finally after updating to the Canary build as suggested by another poster.
That's great if it actually resolves this issue, but I'm definitely a bit skeptical since this specific problem affects only EdXposed users. It's possible that some applications may still fail with that workaround or that applications may stop working periodically. With some solutions, PGO will stop working after several minutes and banking applications may still detect root.
---------- Post added at 01:37 AM ---------- Previous post was at 01:35 AM ----------
vincentallen2 said:
Which module are you referring to? I don't have edxposed installed on my phone, and it's failing to pass safetynet with just magisk installed
Sent from my PH-1 using Tapatalk
Click to expand...
Click to collapse
Do you have all the Google Apps checked on Magisk Hide?

Hirs_E_Fruit said:
Use the Canary Version v0.4.6.3 (4536) of EdXposed and SafetyNet wont fail anmyore.
Click to expand...
Click to collapse
aenews said:
Thanks! I can confirm that switching to the current Canary Build (4542) fixed the SafetyNet issue. Whatever Google silently pushed has been resolved.
Marvelous. Now I can play Pokémon GO
---------- Post added at 03:54 AM ---------- Previous post was at 03:53 AM ----------
Just update to the latest Canary Build. Any newer version will also pass Safety Net.
Click to expand...
Click to collapse
Thanks. I updated to latest canary and it works.

Confirmed fixed both safetynet tests and after clearing storage on the playstore app, I am now "certified" again
Thanks OP and to others in this thread

xdg4y said:
Funny how you try to tell me this doesn't work when I'm using it with it working now just like the people of this site to ride a high horse and always think they are right either because they can't set something up or just doesn't work for them just assumptions without any real evidence but whatever you guys do it the hard way I'll be here laughing.
Click to expand...
Click to collapse
Not sure what module you are using to pass, since the issue is specifically triggered by EdXposed.
If I do not have EdXposed enabled, I do not see any issue.
For most people that have reported the issue, the only resolution has been the canary build to get EdXposed working and SafetyNet passing.
It was a server side change on Google's part.
In the morning my phone was passing SafetyNet. In the afternoon, it was failing.
The only resolution was the canary build.

I don't know have edxpksed and safteynet failed on20.4 but works with 20.3....

kendrick9199 said:
I don't know have edxpksed and safteynet failed on20.4 but works with 20.3....
Click to expand...
Click to collapse
The Magisk dev turned off MagiskHide by default for 20.4, so check that MagiskHide is actually on and that its hiding Google Play Store, Services & Framework

dandocmando said:
The Magisk dev turned off MagiskHide by default for 20.4, so check that MagiskHide is actually on and that its hiding Google Play Store, Services & Framework
Click to expand...
Click to collapse
20.4 stopped working for me even in core only mode.
The server side changes caused failures even without Xposed.
The "canary" version of Magisk is working along with the canary of EdXposed.