So I just installed Lineage 14.1 on my phone but discovered that it has a HUGE bug where it will not load in the contacts off of my SIM
I did make a System Backup using TWRP but it wont let me RoolBack!!! When I go to the file that I saved on my laptop, I dont see it in a zip so so I do not know how to rollback. I picture of what I see in the folder will be here - [IMG="1 - Picture of the TWRP Backup!!!"]https://ibb.co/c2FJCv[/IMG]
I also have a FULL OTA UPDATE as well... PLEASE let me know how to get back to stock rom and what I have to do
storm313 said:
So I just installed Lineage 14.1 on my phone but discovered that it has a HUGE bug where it will not load in the contacts off of my SIM
I did make a System Backup using TWRP but it wont let me RoolBack!!! When I go to the file that I saved on my laptop, I dont see it in a zip so so I do not know how to rollback. I picture of what I see in the folder will be here - [IMG="1 - Picture of the TWRP Backup!!!"]https://ibb.co/c2FJCv[/IMG]
I also have a FULL OTA UPDATE as well... PLEASE let me know how to get back to stock rom and what I have to do
Click to expand...
Click to collapse
since the contacts are in sim card,
first i would suggest you to take out your sim card and then perform a dload flash
or else manually flash boot.img and system.img either by fastboot or through twrp
next time when you backup, do a backup of both system and boot with data partitions so that you wont have a problem restoring it
thilak devraj said:
since the contacts are in sim card,
first i would suggest you to take out your sim card and then perform a dload flash
or else manually flash boot.img and system.img either by fastboot or through twrp
next time when you backup, do a backup of both system and boot with data partitions so that you wont have a problem restoring it
Click to expand...
Click to collapse
I dont know where to find those though... Thats the thing. Please tell me where to get those image files
storm313 said:
I dont know where to find those though... Thats the thing. Please tell me where to get those image files
Click to expand...
Click to collapse
do you have a stock firware with you?? something like update.zip ? for your mmodel?
---------- Post added at 11:07 AM ---------- Previous post was at 11:06 AM ----------
btw, whats your model number?
thilak devraj said:
do you have a stock firware with you?? something like update.zip ? for your mmodel?
---------- Post added at 11:07 AM ---------- Previous post was at 11:06 AM ----------
btw, whats your model number?
Click to expand...
Click to collapse
No I dont.
Model number NMO-L23
Was trying to get the image via Firmware Finder but no working
Also I made a Backup using TWRP Tool and that's not working either *sighs*
storm313 said:
No I dont.
Model number NMO-L23
Was trying to get the image via Firmware Finder but no working
Click to expand...
Click to collapse
give me a minute, ill check out
thilak devraj said:
give me a minute, ill check out
Click to expand...
Click to collapse
Okay thanks you
Rommco05 said:
Why TWRP backup don't work?
Click to expand...
Click to collapse
Whenever I try, I gives some error about check device...while other times after restarting it, it just doesnt do anything.
Any suggestions?
Rommco05 said:
Why TWRP backup don't work?
Click to expand...
Click to collapse
because , he just backed up system partition, and not boot partition,
you have to backup all the three partitions for a twrp backup to work perfectly
for similar incidents in future i recommend backuping contacts to your google account.
storm313 said:
Okay thanks you
Click to expand...
Click to collapse
sorry , didnt find any firmware related ti nmo-l23
---------- Post added at 11:25 AM ---------- Previous post was at 11:24 AM ----------
thelous said:
for similar incidents in future i recommend backuping contacts to your google account.
Click to expand...
Click to collapse
i recomend it @storm313
So there isnt any way of reverting to stock rom? OR any other custom firmware that works?
storm313 said:
So there isnt any way of reverting to stock rom? OR any other custom firmware that works?
Click to expand...
Click to collapse
you can flash custom roms
thilak devraj said:
you can flash custom roms
Click to expand...
Click to collapse
what if i was able to get the update.zip
Would that solve the problem and get me back to stock?
thilak devraj said:
you can flash custom roms
Click to expand...
Click to collapse
Also any custom rom you recommend that I should try to flash
storm313 said:
what if i was able to get the update.zip
Would that solve the problem and get me back to stock?
Click to expand...
Click to collapse
yes, that would revert you back to stock firmware, which, i think, has an option to import contacts from sim card
---------- Post added at 11:42 AM ---------- Previous post was at 11:42 AM ----------
storm313 said:
Also any custom rom you recommend that I should try to flash
Click to expand...
Click to collapse
lineage is the best
thilak devraj said:
yes, that would revert you back to stock firmware, which, i think, has an option to import contacts from sim card
---------- Post added at 11:42 AM ---------- Previous post was at 11:42 AM ----------
lineage is the best
Click to expand...
Click to collapse
Well I dont think it is after all that happened so far
Will try to use firware finder again as I did see a full OTA Package on it for NMO-L23 so I see if I can get the Update.zip from there
storm313 said:
Well I dont think it is after all that happened so far
Will try to use firware finder again as I did see a full OTA Package on it for NMO-L23 so I see if I can get the Update.zip from there
Click to expand...
Click to collapse
all the best! :good:
storm313 said:
Well I dont think it is after all that happened so far
Will try to use firware finder again as I did see a full OTA Package on it for NMO-L23 so I see if I can get the Update.zip from there
Click to expand...
Click to collapse
Does your device have support for emui 5.0 ?
Related
As it says in the title. How to i get it to install. My Tablet is rooted.
Updating this tab to lollipop isn't a good idea (lots of bugs) but have a look here: http://forum.xda-developers.com/memo-pad-7/general/me176c-x-collection-roms-updates-t3012965
Saarge said:
Updating this tab to lollipop isn't a good idea (lots of bugs) but have a look here: http://forum.xda-developers.com/memo-pad-7/general/me176c-x-collection-roms-updates-t3012965
Click to expand...
Click to collapse
I had seen that but it didnt work at all.
Dublin2275 said:
I had seen that but it didnt work at all.
Click to expand...
Click to collapse
If you have a ww sku try to put this file (http://dlcdnet.asus.com/pub/ASUS/EeePAD/ME176C/UL-K013-WW-12.10.1.36_KK-user.zip) on the root of you microSD card and reboot the tab, it should try to flash it (well not on first reboot, you'll have a notification asking you if you want to do the update); if this doesn't work either try the nandroid (https://www.androidfilehost.com/?fid=24052804347832070) from jerbear, it was done on an unmodified me176c with lollipop, you must use the tethered recovery, make a backup, reboot, replace your back up files by the files of the nandroid, then reuse the tethered recovery and restore from the new back up. Ask jerbear from this forum for further explanation, i'm just a user who had the same problem, not a specialist.
---------- Post added at 10:49 PM ---------- Previous post was at 10:48 PM ----------
Ps; the system will do an update after the nandroid restore, it is an older version of the me176c's lollipop rom.
Saarge said:
If you have a ww sku try to put this file (http://dlcdnet.asus.com/pub/ASUS/EeePAD/ME176C/UL-K013-WW-12.10.1.36_KK-user.zip) on the root of you microSD card and reboot the tab, it should try to flash it (well not on first reboot, you'll have a notification asking you if you want to do the update); if this doesn't work either try the nandroid (https://www.androidfilehost.com/?fid=24052804347832070) from jerbear, it was done on an unmodified me176c with lollipop, you must use the tethered recovery, make a backup, reboot, replace your back up files by the files of the nandroid, then reuse the tethered recovery and restore from the new back up. Ask jerbear from this forum for further explanation, i'm just a user who had the same problem, not a specialist.
---------- Post added at 10:49 PM ---------- Previous post was at 10:48 PM ----------
Ps; the system will do an update after the nandroid restore, it is an older version of the me176c's lollipop rom.
Click to expand...
Click to collapse
I have the ME176CX not the ME176C i think that has something to do with it
Dublin2275 said:
I have the ME176CX not the ME176C i think that has something to do with it
Click to expand...
Click to collapse
No, it's the same rom, the difference between them is just the quality of the cams, btw i have a 176cx too and can guaranty you it works.
Saarge said:
No, it's the same rom, the difference between them is just the quality of the cams, btw i have a 176cx too and can guaranty you it works.
Click to expand...
Click to collapse
Does that update mess up the current root i have? Will i need to do a fresh install?
Saarge said:
No, it's the same rom, the difference between them is just the quality of the cams, btw i have a 176cx too and can guaranty you it works.
Click to expand...
Click to collapse
And also if i do a factory reset will i still have the update or can i get it all the way back?
Dublin2275 said:
Does that update mess up the current root i have? Will i need to do a fresh install?
Click to expand...
Click to collapse
You'll have to root again indeed, but remember what i said in the start, you're likely to regret it if you manage to do the update, it's a very bugged one.
---------- Post added at 09:51 AM ---------- Previous post was at 09:44 AM ----------
Dublin2275 said:
And also if i do a factory reset will i still have the update or can i get it all the way back?
Click to expand...
Click to collapse
a factory reset doesn't give you the original rom, the update will still be there, the downgrade is a very tricky process, and i answered you only because you asked, but i repeat myself, you should really keep your tab the way it is now, i regretted having done the update for months until someone finally found a way to roll-back to kitkat.
With lollipop you'll have:
-memory leak (can be fixed anyway).
-overheating.
-crashes.
-apps closing themselves or refusing to launch.
-random reboots of the tab itself.
-some users even had clock issues on the tab (too slow).
-others had battery life issue (tablet discharging too fast).
---------- Post added at 09:56 AM ---------- Previous post was at 09:51 AM ----------
oh and i forgot, google apps crashs.
http://http://cn.club.vmall.com/forum.php?mod=viewthread&tid=12223379
albert-so758 said:
http://http://cn.club.vmall.com/forum.php?mod=viewthread&tid=12223379
Click to expand...
Click to collapse
Do you know which region this will support, perhaps my MHA-L09C432 (UK-EUR), or would I have to rebrand?
cd993 said:
do you know which region this will support, perhaps my mha-l09c432 (uk-eur), or would i have to rebrand?
Click to expand...
Click to collapse
mha-al00c00b173
albert-so758 said:
mha-al00c00b173
Click to expand...
Click to collapse
Thanks
albert-so758 said:
mha-al00c00b173
Click to expand...
Click to collapse
any mirror for that link?
Where is the links?
-Zork- said:
Where is the links?
Click to expand...
Click to collapse
https://www.androidfilehost.com/?fid=745425885120712876
ajsmsg78 said:
https://www.androidfilehost.com/?fid=745425885120712876
Click to expand...
Click to collapse
Superusser. https://mega.nz/#!ZppCQLQC!kWlnukGl3j7TZTO1iiaWsXV53sR1gF1xRZP68pwks88
has anyone flashed this successfully ? i have tried a few times but ended up in bootlop...
What does HRT stand for?
I'd like to know how they get SuperSU to install. If only there was a way to unpack their boot images without errors. It still unpacks but 'su' ends up in its own folder.
ajsmsg78 said:
https://www.androidfilehost.com/?fid=745425885120712876
Click to expand...
Click to collapse
Even though I had problem flashing KangVip 167 (never pass the boot screen) I flashed this Rom without problem. My phone is L29C567B167.
---------- Post added at 05:02 AM ---------- Previous post was at 04:59 AM ----------
burimii said:
has anyone flashed this successfully ? i have tried a few times but ended up in bootlop...
Click to expand...
Click to collapse
Even though I had problem flashing KangVip 167 (never pass the boot screen) I flashed this Rom without problem. You need to install google apps and play store. My phone is L29C567B167.
[email protected] said:
Even though I had problem flashing KangVip 167 (never pass the boot screen) I flashed this Rom without problem. My phone is L29C567B167.
---------- Post added at 05:02 AM ---------- Previous post was at 04:59 AM ----------
Even though I had problem flashing KangVip 167 (never pass the boot screen) I flashed this Rom without problem. You need to install google apps and play store. My phone is L29C567B167.
Click to expand...
Click to collapse
You can flash this to install the Google Apps:
https://www.androidfilehost.com/?fid=457095661767138047
[email protected] said:
Even though I had problem flashing KangVip 167 (never pass the boot screen) I flashed this Rom without problem. My phone is L29C567B167.
---------- Post added at 05:02 AM ---------- Previous post was at 04:59 AM ----------
Even though I had problem flashing KangVip 167 (never pass the boot screen) I flashed this Rom without problem. You need to install google apps and play store. My phone is L29C567B167.
Click to expand...
Click to collapse
did you rebrand or anything before installing the rom?
tcchuin said:
did you rebrand or anything before installing the rom?
Click to expand...
Click to collapse
No I did not rebrand. Just flashed directly from C567B167. I think the rom just change the system and boot partitions therefore it works for other region.
[email protected] said:
Even though I had problem flashing KangVip 167 (never pass the boot screen) I flashed this Rom without problem. My phone is L29C567B167.
---------- Post added at 05:02 AM ---------- Previous post was at 04:59 AM ----------
Even though I had problem flashing KangVip 167 (never pass the boot screen) I flashed this Rom without problem. You need to install google apps and play store. My phone is L29C567B167.
Click to expand...
Click to collapse
Did you flashed the decrypted boot img and Wipe- Format Data, or you just flashed it doing nothning else?
Sent from my MHA-AL00 using Tapatalk
burimii said:
Did you flashed the decrypted boot img and Wipe- Format Data, or you just flashed it doing nothning else?
Sent from my MHA-AL00 using Tapatalk
Click to expand...
Click to collapse
In just format the data and flashed it .Nothing else.
C185 coded phone only format data to make trouble-free. But I have some problems. When I try to remove the Chinese applications, the phone restarts. Do you have any suggestion?
MeHMeTDaLGiC said:
C185 coded phone only format data to make trouble-free. But I have some problems. When I try to remove the Chinese applications, the phone restarts. Do you have any suggestion?
Click to expand...
Click to collapse
Have you unchecked the "Show statusbar lunar" in the Notification settings (Advanced settings)? I removed all the Chinese applications without problem.
[email protected] said:
Have you unchecked the "Show statusbar lunar" in the Notification settings (Advanced settings)? I removed all the Chinese applications without problem.
Click to expand...
Click to collapse
Thank you for your help. I removed the applications. But Google does not sync people and download apps with Google Play is very very slow with both wifi and mobile .. Is there such a nuisance? And where did you get Gapps from?
I have only tested on T-Mobile and us unlocked so flash at your own risk if u have a different device variant.
It was made for T-Mobile and us unlocked so I'm not sure if it would work on other variants.
Source will be updated in my github https://github.com/TWINNFAMOUS/android_device_htc_ocl/tree/android-7.1
MAJOR THANKS & CREDITS TO @Captain_Throwback @nkk71 for all the help with getting twrp working and decryption.
fastboot flash recovery recovery.img or what ever you name it.
Flashes images and zips and will take full backups.
Also is stock T-Mobile recovery.
I need a stock T-Mobile boot.img and system if anyone decides to send me one it would be appreciated.
Known bugs for twrp 3.2.1-0
Reboot to recovery does not work.
We need kernel source to fix so don't ask unless you know there's kernel source.
Make sure to report back ANY BUGS.
Link to Oreo compatible twrp 3.2.1-0
https://www.androidfilehost.com/?fid=11410963190603878155
Link to Nougat compatible twrp
https://www.androidfilehost.com/?fid=11410963190603878120
Link to stock T-Mobile recovery is broken
If u guys want to thank me make a thread where people can upload there stock imgs boot system and recovery with software numbers and get a little more active it is a HTC phone after all. And please hit the thanks button if I have helped you.
twinnfamous said:
I have only tested on T-Mobile and us unlocked so flash at your own risk if u have a different device variant.
It was made for T-Mobile and us unlocked so I'm not sure if it would work on other variants.
Source is in my github profile
fastboot flash recovery recoverytest.img
Flashes images and zips and will take full backups.
Also is stock T-Mobile recovery.
I need a stock T-Mobile boot.img and system if anyone decides to send me one it would be appreciated.
Make sure to report back
Link to twrp test. https://drive.google.com/file/d/1pRpcZ2E3EjaMliu8Gwga9LJvvyhWQvL9/view?usp=drivesdk
Link to stock T-Mobile recovery. https://drive.google.com/file/d/14uRTanDjkeeGkUwdGoJhgAICSGgfjbLq/view?usp=drivesdk
Click to expand...
Click to collapse
I thought you purchased the stock images from that website?..
dpryor88 said:
I thought you purchased the stock images from that website?..
Click to expand...
Click to collapse
They don't have T-Mobile version I got the stock recovery after I rooted.
twinnfamous said:
They don't have T-Mobile version I got the stock recovery after I rooted.
Click to expand...
Click to collapse
Ohhh
---------- Post added at 08:32 PM ---------- Previous post was at 08:22 PM ----------
twinnfamous said:
They don't have T-Mobile version I got the stock recovery after I rooted.
Click to expand...
Click to collapse
The test TWRP build on here works for me. Can't access SD card/data. Is that still a known issue or did I do something wrong when flashing? It took a few seconds to load TWRP when rebooting to recovery, then it asked for a password, where I just pushed Cancel. Then I swiped to allow modifications. No access to data though.
Thanks for this though dude! It's progress!
dpryor88 said:
Ohhh
---------- Post added at 08:32 PM ---------- Previous post was at 08:22 PM ----------
The test TWRP build on here works for me. Can't access SD card/data. Is that still a known issue or did I do something wrong when flashing? It took a few seconds to load TWRP when rebooting to recovery, then it asked for a password, where I just pushed Cancel. Then I swiped to allow modifications. No access to data though.
Thanks for this though dude! It's progress!
Click to expand...
Click to collapse
It won't unencrypt data. It did for me sometimes but not everytime and when I looked at the log it said my data partition was set to ext4 but said it was Emmc so I tried to change f.stab file and it still wouldn't unencrypt.
So I went to Twrp and in advanced format settings I clicked data partition and chose repair or change filesystem and changed from emmc to ext4 then it worked after it formatted. The only problem is now my secure boot doesn't work and Twrp never asks for a password. I wouldn't recommend doing what I did.
twinnfamous said:
It won't unencrypt data. It did for me sometimes but not everytime and when I looked at the log it said my data partition was set to ext4 but said it was Emmc so I tried to change f.stab file and it still wouldn't unencrypt.
So I went to Twrp and in advanced format settings I clicked data partition and chose repair or change filesystem and changed from emmc to ext4 then it worked after it formatted. The only problem is now my secure boot doesn't work and Twrp never asks for a password. I wouldn't recommend doing what I did.
Click to expand...
Click to collapse
Ok I'll hold off for now till things get worked out a bit.
twinnfamous said:
It won't unencrypt data. It did for me sometimes but not everytime and when I looked at the log it said my data partition was set to ext4 but said it was Emmc so I tried to change f.stab file and it still wouldn't unencrypt.
So I went to Twrp and in advanced format settings I clicked data partition and chose repair or change filesystem and changed from emmc to ext4 then it worked after it formatted. The only problem is now my secure boot doesn't work and Twrp never asks for a password. I wouldn't recommend doing what I did.
Click to expand...
Click to collapse
https://forum.xda-developers.com/z2-force/development/twrp-3-1-1-0-moto-z2-force-nash-t3687421
Check this out. They have twrp but it needs to be formatted first to enable encryption. I guess magisk doesn't do this but SuperSU does? Maybe you'll understand.
Hope this helps.
dpryor88 said:
https://forum.xda-developers.com/z2-force/development/twrp-3-1-1-0-moto-z2-force-nash-t3687421
Check this out. They have twrp but it needs to be formatted first to enable encryption. I guess magisk doesn't do this but SuperSU does? Maybe you'll understand.
Hope this helps.
Click to expand...
Click to collapse
I did the format data already and I use the same supersu that I use on my HTC 10 the only thing I had to do is flash back stock boot.img because su wouldn't patch the magisk one. Now we need some custom roms.
twinnfamous said:
I did the format data already and I use the same supersu that I use on my HTC 10 the only thing I had to do is flash back stock boot.img because su wouldn't patch the magisk one. Now we need some custom roms.
Click to expand...
Click to collapse
So how did you fix in the end?
So you have the stock boot.img after all?
dpryor88 said:
So how did you fix in the end?
So you have the stock boot.img after all?
Click to expand...
Click to collapse
I used the stock is unlocked boot image.
I posted it in the root thread
twinnfamous said:
I used the stock is unlocked boot image.
I posted it in the thread
Click to expand...
Click to collapse
Which thread? I only see stock recovery..
---------- Post added at 08:41 AM ---------- Previous post was at 08:19 AM ----------
twinnfamous said:
I used the stock is unlocked boot image.
I posted it in the root thread
Click to expand...
Click to collapse
I formatted and supersu'd. Now you're right, we need roms haha.
twinnfamous said:
I have only tested on T-Mobile and us unlocked so flash at your own risk if u have a different device variant.
It was made for T-Mobile and us unlocked so I'm not sure if it would work on other variants.
Source is in my github profile
fastboot flash recovery recoverytest.img
Flashes images and zips and will take full backups.
Also is stock T-Mobile recovery.
I need a stock T-Mobile boot.img and system if anyone decides to send me one it would be appreciated.
Make sure to report back
Link to twrp test2
https://drive.google.com/file/d/1Km7axvKZYImX_Qat7kV-iZQTJobvWlcP/view?usp=drivesdk
Link to stock T-Mobile recovery. https://drive.google.com/file/d/14uRTanDjkeeGkUwdGoJhgAICSGgfjbLq/view?usp=drivesdk
Click to expand...
Click to collapse
What's new in the version 2?
dpryor88 said:
What's new in the version 2?
Click to expand...
Click to collapse
hoping decryption works everything else works.
twinnfamous said:
hoping decryption works everything else works.
Click to expand...
Click to collapse
Nice I'll try it in a minute
---------- Post added at 03:46 AM ---------- Previous post was at 03:15 AM ----------
twinnfamous said:
hoping decryption works everything else works.
Click to expand...
Click to collapse
Any clue what the easiest way is to go back to my unformatted data? I formatted so I could see internal... Now I wanna go back if twrp will read internal now
Thanks.
twinnfamous said:
hoping decryption works everything else works.
Click to expand...
Click to collapse
Everything on test2 works for me. But I did already format my data before on the first build, so i can't really be the best review for this. But for me, all is working great. Thanks!
Gonna flash the final version here in a minute. I'll report back
Twrp working great for me...now I'm fully rooted...thanks alot for this✌
Sent from my HTC U11 life using XDA-Developers Legacy app
Lavell11 said:
Twrp working great for me...now I'm fully rooted...thanks alot for this✌
Click to expand...
Click to collapse
Make that two of us. Works great.
Lavell11 said:
Twrp working great for me...now I'm fully rooted...thanks alot for this
Sent from my HTC U11 life using XDA-Developers Legacy app
Click to expand...
Click to collapse
dpryor88 said:
Make that two of us. Works great.
Click to expand...
Click to collapse
I'm happy to now I can sleep tonight
twinnfamous said:
I'm happy to now I can sleep tonight
Click to expand...
Click to collapse
Get some ? bro..?
Sent from my HTC U11 life using XDA-Developers Legacy app
I have a US Model BLA-A09 that I flashed LineneageOS on. How do I return the unit back to stock. I can't seem to find the stock firmware anywhere for this model.
Thanks
Sent from my SM-G955U1 using Tapatalk
dkotoric said:
I have a US Model BLA-A09 that I flashed LineneageOS on. How do I return the unit back to stock. I can't seem to find the stock firmware anywhere for this model.
Thanks
Sent from my SM-G955U1 using Tapatalk
Click to expand...
Click to collapse
I have a US model and sorry can't answer your question however hoping you can help me by explaining how you rooted and unlocked your phones boot loader? If there is no way to recover for us US users though I may want to hold off.
Thanks
dkotoric said:
I have a US Model BLA-A09 that I flashed LineneageOS on. How do I return the unit back to stock. I can't seem to find the stock firmware anywhere for this model.
Thanks
Click to expand...
Click to collapse
http://pro-teammt.ru/firmware-database/?firmware_model=bla-l09&firmware_page=0
---------- Post added at 04:32 PM ---------- Previous post was at 04:23 PM ----------
ej_424 said:
I have a US model and sorry can't answer your question however hoping you can help me by explaining how you rooted and unlocked your phones boot loader? If there is no way to recover for us US users though I may want to hold off.
Thanks
Click to expand...
Click to collapse
https://forum.xda-developers.com/ma...o-standard-t3709535/post74619290#post74619290
lvbaal said:
http://pro-teammt.ru/firmware-database/?firmware_model=bla-l09&firmware_page=0
---------- Post added at 04:32 PM ---------- Previous post was at 04:23 PM ----------
https://forum.xda-developers.com/ma...o-standard-t3709535/post74619290#post74619290
Click to expand...
Click to collapse
Only follow the unlock part, then flash TWRP (https://forum.xda-developers.com/mate-10/development/huawei-mate-10-pro-twrp-3-2-1-0-t3769904) from dev section and latest magisk after that. (http://tiny.cc/latestmagisk)
@dkotoric there doesn't seem to be any A09 yet. Either it hasn't gotten any updates yet or they just haven't been found.
I have stock firmware for BLA-A09 I can share with you. Tell me where to send
253simon said:
I have stock firmware for BLA-A09 I can share with you. Tell me where to send
Click to expand...
Click to collapse
here is the update.app from -BLA-A09 8.0.0.110(C567) update zip https://drive.google.com/open?id=1k2IvVqMyjoMWlSe1ZgXWRYt6wn4n4qaY
253simon said:
here is the update.app from -BLA-A09 8.0.0.110(C567) update zip https://drive.google.com/open?id=1k2IvVqMyjoMWlSe1ZgXWRYt6wn4n4qaY
Click to expand...
Click to collapse
dude cannot thank you enough!!!
culiacanazo said:
dude cannot thank you enough!!!
Click to expand...
Click to collapse
How do I flash in fastboot?
Here is the SYSTEM.img
https://drive.google.com/file/d/1u7XGEOnrNL3R6vWn17-9JUqxjmAe4Fbs/view
With this guide to flash the img file
https://forum.xda-developers.com/mate-10/how-to/guide-treble-compatible-rom-t3761927
253simon said:
How do I flash in fastboot?
Click to expand...
Click to collapse
Thank you, i intend to help but at the moment i really can't. I'll get to it myself as soon as i have a chance
fastboot is the way! Thank you for sharing the firmware!
Edit why are they uploading sideways all of a sudden?!
culiacanazo said:
fastboot is the way! Thank you for sharing the firmware!
Edit why are they uploading sideways all of a sudden?!
Click to expand...
Click to collapse
No problem
culiacanazo said:
fastboot is the way! Thank you for sharing the firmware!
Edit why are they uploading sideways all of a sudden?!
Click to expand...
Click to collapse
Your pictures shown it's flashed kernel and recovery. Did you manually flashed it? Or it's doing automatically.....
Sent from my BLA-A09 using Tapatalk
253simon said:
Here is the SYSTEM.img
https://drive.google.com/file/d/1u7XGEOnrNL3R6vWn17-9JUqxjmAe4Fbs/view
With this guide to flash the img file
https://forum.xda-developers.com/mate-10/how-to/guide-treble-compatible-rom-t3761927
Click to expand...
Click to collapse
Any chance you could post the SYSTEM.img again. The extract tool isnt working for me. Thanks!
chandler781 said:
Any chance you could post the SYSTEM.img again. The extract tool isnt working for me. Thanks!
Click to expand...
Click to collapse
Im away from the computer right now but can post it later
253simon said:
Im away from the computer right now but can post it later
Click to expand...
Click to collapse
Perfect, thanks!!
chandler781 said:
Perfect, thanks!!
Click to expand...
Click to collapse
https://forum.xda-developers.com/ma...9-c567-usa-t3775258/post76170754#post76170754
got it buddy :highfive:
rogconnect said:
Your pictures shown it's flashed kernel and recovery. Did you manually flashed it? Or it's doing automatically.....
Click to expand...
Click to collapse
I manually flashed the system.IMG, kernel (aka boot) and recovery ramdisk image thru fastboot. With that, I was able to start (it wouldn't) but I somehow was missing some things I had deleted (and that's understandable) but some things I never had as well (such as system update, clones, magazine, and translator.
Somehow, after starting I was able to see the update in Firmware Finder, which before that I hadnt been able to. Downloaded it immediately and I also, same as another commenter I read just now around here somewhere, had problems with the extractor, so this time instead of the three individual IMGs thru fastboot, I flashed TWO of the supposed to be three update, update full, and update public (with the missing one being update.zip) straight thru the unofficial TWRP and voila! Back to complete clean stock with safety net (and Google pay verified and conserving custom recovery
culiacanazo said:
I manually flashed the system.IMG, kernel (aka boot) and recovery ramdisk image thru fastboot. With that, I was able to start (it wouldn't) but I somehow was missing some things I had deleted (and that's understandable) but some things I never had as well (such as system update, clones, magazine, and translator.
Somehow, after starting I was able to see the update in Firmware Finder, which before that I hadnt been able to. Downloaded it immediately and I also, same as another commenter I read just now around here somewhere, had problems with the extractor, so this time instead of the three individual IMGs thru fastboot, I flashed TWO of the supposed to be three update, update full, and update public (with the missing one being update.zip) straight thru the unofficial TWRP and voila! Back to complete clean stock with safety net (and Google pay verified and conserving custom recovery
Click to expand...
Click to collapse
Could you kindly share the kernel and ramdisk image please?
Very much appreciate!
Sent from my BLA-A09 using Tapatalk
rogconnect said:
Could you kindly share the kernel and ramdisk image please?
Very much appreciate!
Click to expand...
Click to collapse
I can if you want but they're here and are the same ones
Huawei mate 10 pro-bla-a09 (c567) usa
https://forum.xda-developers.com/mate-10/development/huawei-mate-10-pro-bla-a09-c567-usa-t3775258
The stock ROM now received a official update for the RETEU model (XT1965-3)!
Aha!
I've tried to get the link from the logs but it does not want to download, (blank page in firefox permission denied message in chromium....)
It does seem to be different from the links I've tried before
SvenHee said:
Aha!
I've tried to get the link from the logs but it does not want to download, (blank page in firefox permission denied message in chromium....)
It does seem to be different from the links I've tried before
Click to expand...
Click to collapse
https://mirrors.lolinet.com/firmwar...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Thanks, but could I install that? It is not RETEU...
SvenHee said:
Thanks, but could I install that? It is not RETEU...
Click to expand...
Click to collapse
Its working perfectly fine on my XT1965-3 RETEU
You can flash it using this
Is there a way to force OTA?
Envoyé de mon moto g(7) plus en utilisant Tapatalk
Teo S. said:
Its working perfectly fine on my XT1965-3 RETEU
You can flash it using this
Click to expand...
Click to collapse
When i use your flash script will this perform a normal Update oder will it be a full reset?
CharlyBrok said:
Is there a way to force OTA?
Click to expand...
Click to collapse
If you have an unrooted phone and locked bootloader you can try to go to settings>system>system updates and see what happens.
SebastMa said:
When i use your flash script will this perform a normal Update oder will it be a full reset?
Click to expand...
Click to collapse
it will perform a full reset. You can remove the line that says: fastboot erase userdata. But it may result in bootloop.
I believe you should also be able to upload it using Motorola smart assistant
December patch
Controwl said:
I believe you should also be able to upload it using Motorola smart assistant
Click to expand...
Click to collapse
I tried yesterday, it says "Phone not supported", even though it is listed.
Probably because of unlocked bootloader...
RETEU, still on August patch, no update listed, not 10 or any new security patch level. OTA or LMSA, same info, no update
Betbruder said:
RETEU, still on August patch, no update listed, not 10 or any new security patch level. OTA or LMSA, same info, no update
Click to expand...
Click to collapse
Same here, do you have reteu or reteu2?
flopglop said:
Same here, do you have reteu or reteu2?
Click to expand...
Click to collapse
You can use the RETAIL roms there's no difference.
---------- Post added at 12:24 PM ---------- Previous post was at 12:23 PM ----------
SvenHee said:
I tried yesterday, it says "Phone not supported", even though it is listed.
Probably because of unlocked bootloader...
Click to expand...
Click to collapse
The LMSA wont recognize the phone if it's not on stock rom, e.g. when running custom roms.
flopglop said:
Same here, do you have reteu or reteu2?
Click to expand...
Click to collapse
i dont know. i will have a look. do i find it under system?
Betbruder said:
i dont know. i will have a look. do i find it under system?
Click to expand...
Click to collapse
Yes, in software channel
Teo S. said:
The LMSA wont recognize the phone if it's not on stock rom, e.g. when running custom roms.
Click to expand...
Click to collapse
I am on stock, just rooted/unlocked bootloader.
---------- Post added at 09:56 PM ---------- Previous post was at 09:01 PM ----------
Teo S. said:
Its working perfectly fine on my XT1965-3 RETEU
You can flash it using this
Click to expand...
Click to collapse
I tried extracting your file for manual installation (on linux) but somehow the tiny rar wants to change to a 18 Mb file... Am I doing something wrong?
Edit: tried agian, now seems to be 10 Gb...
SvenHee said:
I am on stock, just rooted/unlocked bootloader.
---------- Post added at 09:56 PM ---------- Previous post was at 09:01 PM ----------
I tried extracting you file for manual installation (on linux) but somehow the tiny rar wants to change to a 18 Mb file... Am I doing something wrong?
Edit: tried agian, now seems to be 10 Gb...
Click to expand...
Click to collapse
You mean the rom or the flash file?
flopglop said:
Yes, in software channel
Click to expand...
Click to collapse
reteu