Database Develop

[Q] How Do I change CWM to TWRP

Hey guys, i just bought this HTC One, and it had CWM pre-installed.
I have downloaded GooManager, and Installed Recovery via "Install Open Recovery Script" inside the app.
However each time I boot into Recovery I keep getting CWM. What am i missing here? Please help! Thank you!

CWM pre-installed? Was it pre-owned as well? Don't flash through GooManager, I read that there is a compatibility issue with the new TWRP. Just download the TWRP img file, go into fastboot then plug in your USB cable. It should now say Fastboot USB. Type :
Code:
fastboot flash recovery xxxxxxxxx.img
<--- xxxxx is the file name of the TWRP image. You can just rename the file to twrp.img for easier typing
Then type :
Code:
fastboot erase cache
That's it

[TWRP][RECOVERY][4.4.2] Lenovo A3500-HV

Recovery TWRP 2.8.0.0​
The Original Thread : Here
For Rooted Devices​
Set MobileUncleTool
Download the archive with recovery stage, unpack it and recovery.img file copied to the SD card or the internal memory of the device.
Run Mobileuncle >> Recovery Update >> In the list find the recovery.img >> Ok >>Ok​

[GUIDE][Coolpad Cool1 Dual] How to Change Boot Logo (Splash Screen)

Note:
This is not bootanimation, this is the splash screen (the 'Coolpad' boot logo which is displayed when device is switched ON)
This is for Coolpad Cool1 Dual Snapdragon variants Only..
For other devices, please send me your splash.img so that I can create a tool for you too..
Requirements:
1. Rooted Coolpad Cool1 Dual (any ROM)
2. Optional: Terminal Emulator app or Custom Recovery or atleast working fastboot in computer
3. You're proceeding at your own risk.
STEPS to create splash.img:
1. Download & Extract this in computer: Coolpad_Cool1_Dual_Splash_Maker.zip
2. Make sure you have 4 pictures (same or different) in 1080x1920 px resolution in PNG format.
(It seems Coolpad displays any 1 picture from the 4 pictures randomly while switching ON, so I think you'll have to use 4 pictures)
3. Now rename your 4 pictures as logo1.png, logo2.png, logo3.png, logo4.png & replace it inside "pics" folder of the extracted folder.
(Similarly you can replace other pictures in it carefully if you wish)
4. Finally, run the 'CREATE_LOGO.bat' to create splash.img and flashable zip file, which you can find inside the "output" folder after completion.
STEPS to flash splash.img:
Optional: To backup your original splash.img:
Code:
dd if=/dev/block/bootdevice/by-name/splash of=/sdcard/splash.img
(Not necessary though.. You may get it from the stock firmware itself.)
Now, Choose any one easy method:
a. To flash from recovery:
Transfer the flashable_splash.zip to your device and flash from TWRP or CWM or Philz or any other custom recovery.
b. To flash from Terminal Emulator:
Transfer the splash.img to your device's Internal Storage, Open Terminal Emulator & enter the following to flash it:
Code:
su
dd if=/sdcard/splash.img of=/dev/block/bootdevice/by-name/splash
c. To flash from Fastboot mode:
Code:
fastboot flash splash splash.img
Note:
Incase something goes wrong or device doesn't bootup, flash the stock splash.img from custom recovery or fastboot.
Credits:
1. Thanks to @Vikasspattel who provided the stock splash.img of Coolpad Cool 1 Dual ..
2. This is just a modified version of my tool here: [GUIDE] How to Change Boot Logo (Splash Screen) of LeEco Le 2 / Le S3
Hit the Thanks :good: button if it worked for you
You're welcome to share the splash images that you created

Thank You sir for reading my comment and helped by your quick effort ,
well i had no hope but thank you so much

hi
i installed custom recovery to cool 1 c 103
after it finished model number changed to 106
what i have to do?????

[RECOVERY] TWRP 3.2.1 only fastboot

Hello. I ported latest twrp from nexus 2012 to ouya. You can't install it because ouya don't have enough space on recovery partition. You need to boot it from fast boot
fastboot boot recovery.img
download: http://www.mediafire.com/file/7gyb6xjdwr8k3n0/recovery.img
Everything is working
I recommend to disable screen timeout after first boot

Not a single custom recarevi is flashed (writes abortet), being in the stock recovery with the command in the command line adb sideload. Tried using commands in the command line, and put programs like Flashify (for root users) and Rashr - Flash Tool ,does not help, error.

[GUIDE] How to convert to Wileyfox swift (crackling) from Android one 2gen (seed)

Code:
*
*Your warranty is now void.
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
How to convert to Wileyfox swift (crackling) from Android one 2gen (seed)
THIS ONLY WORK ON Qualcomm Snapdragon 410 (MSM8916)
Basic Requirements \/
1.Proper brain with Knowledge about ADB and flash.
2.Phone With Unlock bootloader.
3.Working Computer.
4.Reliable USB cable.
5.BACK UP YOUR DATA
(If your Phone is not Unlock bootloader) Go this from Wiki.lineageos[url]https://wiki.lineageos.org/devices/seed/install#unlocking-the-bootloader[/URL]
Get ADB from Wiki.Lineageos here [url]https://wiki.lineageos.org/adb_fastboot_guide.html#on-windows[/URL]
LET DO THIS.
Download the cm-13.0-ZNH0EAS2NH-crackling-signed-fastboot-2306277a34.zip here (no more link) [I had to remove the DL link BC of i am new user lol, due of xda rule, you can find via androidfilehost.com or search on Google.]
Then extract all files (without folder) and put directly in to platform-tools. Now open "Windows PowerShell" then type this command to run ADB and Fastboot
Code:
cd where you put the platfrom-tools
Ex. cd C:/user/download/platfrom-tools
hit enter on your keyboard to run.
Now Boot your phone to fastboot. To do this hold Volume down + Power Button now plug your phone to PC
Once the phone is in fastboot mode, verify your PC finds it by typing
Code:
fastboot devices
If you see your phone then proceed. (If not try different usb or reinstalling the ADB drivers and Fastboot Driver before you go.)
(Warning!!!! Follow carefully the command may ended up will break your phone if you don't follow and will erase all of your data. Just i warn you!!!!)
Type this all command
Code:
fastboot erase DDR
fastboot erase userdata
fastboot flash sbl1 sbl1.mbn
fastboot flash aboot emmc_appsboot.mbn
fastboot flash tz tz.mbn
fastboot flash boot boot.img
fastboot flash splash splash.img
fastboot flash cache cache.img
fastboot flash recovery recovery.img
fastboot erase system
fastboot flash system system.img
fastboot flash userdata userdata.img
fastboot reboot
Wait to boot
And now setup your phone now........
Go back to fastboot then flash the TWRP
To flash TWRP go here [url]https://wiki.lineageos.org/devices/crackling/install#installing-a-custom-recovery-using-fastboot[/URL] this take you to wiki.lineageos
Now... FIND THE ROM YOU LIKE
(Note: only you install crackling rom not seed)
You're done.....
Need help? Just ask me here.
Special thanks (AKA Credits)
Lineageos and wiki.lineageos
@JominatorX
@m192
@SubwayChamp (for helping me)

Knowing Bugs........
1.Blue Screen flicker (all Phone )
2.Camera may or not working sometimes, Blue Screen occur will reboot your phone............. (Only on Foxy Kernel)
3.Battery may bug out (All of Them )
(To fix just discharge the battery/phone. To do this power off your phone and remove the battery then Holding Down the Power Buttons for Few 30sec then put it back your battery and power on your phone.)
4.GPS will be not super accuracy unlike the stock rom
(As of Ang 13 2019 lineage os developer they fix the GPS accuracy)
5.i-mobile iQ II 8150 poor RAM due of 1GB of ram
(To fix this Install Android Go enabler)
That it, i can find some more bugs but i need more testing
I have 4 phone to test (i own)
Cherry Mobile G1 (H220)
General Mobile 4G / 4G Dual (GM-113)
i-mobile iQ II (8150)