|MARKW | BETA | LineageOS 14.1 | Razziell's Version - Xiaomi Redmi 4 Prime ROMs, Kernels, Recoveries, &

Changes​¬The video recording in the camera has been fixed (so far ha1, without camera2api - hal3, as it should be at 7, because the proprietary of 6, the third party also works)!
¬Fixed voice recording in recorders and instant messengers
¬New Nosgoth 3.18.31 kernel is used (by Anomalchik, I'm on the hook)
Bugs​¬Hearing on calls with active pop-up notifications (disinfected in settings - screen - pop-up notifications)
¬Stock camera green on video recording in the dark
¬Small Battery Drain caused by System?!
The ROM won't be updated frequently so keep that in mind.​
Download From GDrive​
Installation
¬Go to TWRP
¬Wipe and then Click on Advanced Wipe
¬Check the followings if you want a clean Installation:
[*]Davlik Cache,
[*]Cache,
[*]Data,
[*]System
¬Go back and click on Install
¬Find the ROM in the destination you saved it and Install it
¬then Install the GAPPS which can be found here ARM64->7.1->pico(recommended)
¬Reboot and Proceed​
Kernel source: https://github.com/anomalchik/android_kernel_xiaomi_msm8953
Contributors
Razziell
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.x
ROM Firmware Required: 8.2.*
Based On: LineageOS
Version Information
Status: Beta
Beta Release Date: 2017-08-04
P.S. Made a thread cause none did, if Razziell does not approve it I'll take it down, We could also post it in Jacoghi's thread but none would update the thread, so I made one just in case.
All Credits go to @Razziell

wow another work by @Razziell ????

the rom overall so smooth no lags, but as mentioned above, the battery a little bit fast drain

mikey000 said:
the rom overall so smooth no lags, but as mentioned above, the battery a little bit fast drain
Click to expand...
Click to collapse
This problem is also present in CrDroid
Sent from my Redmi 4 Prime using XDA-Developers Legacy app

psykkuno said:
This problem is also present in CrDroid
Sent from my Redmi 4 Prime using XDA-Developers Legacy app
Click to expand...
Click to collapse
RR doesnt... strange...

thomasginn said:
RR doesnt... strange...
Click to expand...
Click to collapse
Yeah exactly that's strange cause RR uses the same sources.

psykkuno said:
Yeah exactly that's strange cause RR uses the same sources.
Click to expand...
Click to collapse
that what I was thinking... if they use the same sources, why doesn't work?

thomasginn said:
that what I was thinking... if they use the same sources, why doesn't work?
Click to expand...
Click to collapse
My guess would be changes in the System itself meaning that Razziell edits the RR first then applies the changes in LOS,CrDroid so maybe the code would be a lil different causing that bug to persist.

I have switced to this ROM and seems overall ok. But why there's no FP option??
I can't find Fingerprint settings anywhere. Can anybody help?

I've found a problem. Whenever I exit an app, music volume of connected bluetooth headset goes to high automatically. Haven't tested with 3.5mm earphone. Anybody found this problem too?

abhi281 said:
I have switced to this ROM and seems overall ok. But why there's no FP option??
I can't find Fingerprint settings anywhere. Can anybody help?
Click to expand...
Click to collapse
Hmmm did you clean install it?

kibria.mgk said:
I've found a problem. Whenever I exit an app, music volume of connected bluetooth headset goes to high automatically. Haven't tested with 3.5mm earphone. Anybody found this problem too?
Click to expand...
Click to collapse
I don't have a Bluetooth headset to reproduce it so... wait for others to confirm it.

psykkuno said:
Hmmm did you clean install it?
Click to expand...
Click to collapse
yes, clean install. btw problem is solved now. I have found FP settings after 3-4 random reboot of the phone. Don't know why it didn't come before. ROM is good, but missing extra customization options like RR or CrDroid.

abhi281 said:
yes, clean install. btw problem is solved now. I have found FP settings after 3-4 random reboot of the phone. Don't know why it didn't come before. ROM is good, but missing extra customization options like RR or CrDroid.
Click to expand...
Click to collapse
Heck I know what you're saying I could use Lineage but without a navbar it feels very weird.

There is an update version of this rom on 4PDA. Someone who wants the LOS can try that rom.

although i am using miui, but thank you so much!

Yes, that's @Razziell version from 28.08
Here is link: https://drive.google.com/file/d/0B_aCJyAhJEOxQmN4d1J3Ym10QW8/view

Here is the 4pda post.
https://4pda.ru/forum/index.php?showtopic=794653&st=5580
Doesn't look like much has changed from previous version?

Well I have been using it all morning. 100% smooth and no problems so far I'm happy to report, except the USB disconnect bug that this phone seems to have on every ROM except MIUI. Even advanced reboot working. Great job, @Razziell and I hope this last problem will get fixed sometime too!

DryEagle said:
Well I have been using it all morning. 100% smooth and no problems so far I'm happy to report, except the USB disconnect bug that this phone seems to have on every ROM except MIUI. Even advanced reboot working. Great job, @Razziell and I hope this last problem will get fixed sometime too!
Click to expand...
Click to collapse
Let's hope for official one day

Related

[ROM][6.x] OmniROM

OmniROM
[#MARSH]
[#ESPRESSONAME]
​
[#WHATSOMNI]
[#WARRANTY]
Downloads:
[#DLGITHUBIO]
[#INFOOMNI]
[#DONATETOME]
XDA:DevDB Information
[unified] OmniROM 6.x, ROM for the Samsung Galaxy Tab 2
Contributors
Android-Andi, Ziyan
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.0.x
Version Information
Status: Testing
Created 2016-06-24
Last Updated 2017-04-30
Thanks bro, cant wait to download and test this new omni 6.0
Still testing version, right? Any knowns bugs? Or bugs same with your cm13?
And about the usefull link, I didnt see any changelog for omni 6.0 or am I miss that?
The screen rotation seems to wrong for me. Other than that it seems to work well
Sent from my D5803 using XDA-Developers mobile app
Buleste said:
The screen rotation seems to wrong for me. Other than that it seems to work well
Sent from my D5803 using XDA-Developers mobile app
Click to expand...
Click to collapse
Exactly the same issue. Screen rotation is switched but touch is working fine
Buleste said:
The screen rotation seems to wrong for me. Other than that it seems to work well
Sent from my D5803 using XDA-Developers mobile app
Click to expand...
Click to collapse
I don't have my tab with me, but i can upload a flashable zip later to test. I guess i know the issue.
iks8 said:
Exactly the same issue. Screen rotation is switched but touch is working fine
Click to expand...
Click to collapse
~ All my work, news etc. on http://andi34.github.io ~
Abigail said:
Thanks bro, cant wait to download and test this new omni 6.0
Still testing version, right? Any knowns bugs? Or bugs same with your cm13?
Click to expand...
Click to collapse
Same as on CM 13.
And about the usefull link, I didnt see any changelog for omni 6.0 or am I miss that?
Click to expand...
Click to collapse
looks like omni updated their page and the links not working anymore. You'll see made changes on gerrit.
~ All my work, news etc. on http://andi34.github.io ~
Chromecast should work, but haven't tested myself.
~ All my work, news etc. on http://andi34.github.io ~
I hope attached zip fixes the sensor position to have proper rotation Please let me know if it works
Android-Andi said:
I hope attached zip fixes the sensor position to have proper rotation Please let me know if it works
Click to expand...
Click to collapse
fix is working, thanks
Same here - good to go!
Do I need to have Andy's TWRP? Which gapps are recommended? Do I need to flash supersu if I want root? Thanks
lepa71 said:
Do I need to have Andy's TWRP? Which gapps are recommended? Do I need to flash supersu if I want root? Thanks
Click to expand...
Click to collapse
Idk if older or other recoveries work, i only use the one i shared.
Deltadroid gapps, mentioned on my userpage.
About root... It's mentioned in FAQ too for a good reason....
NOTE:*OmniRom and AOSP aren't pre-rooted, you need to use*SuperSuor the*OpenSource SuperUser*to get rooted.
Click to expand...
Click to collapse
~ All my work, news etc. on http://andi34.github.io ~
now is working fine, thanks...
Android-Andi said:
Idk if older or other recoveries work, i only use the one i shared.
Deltadroid gapps, mentioned on my userpage.
About root... It's mentioned in FAQ too for a good reason....
~ All my work, news etc. on http://andi34.github.io ~
Click to expand...
Click to collapse
Do you recommend basic delta gapps or standard? I usually use nano open gapps.
lepa71 said:
Do you recommend basic delta gapps or standard? I usually use nano open gapps.
Click to expand...
Click to collapse
You can use open gapps too, but they cause trouble for some user if permissions aren't set before sign in.
~ All my work, news etc. on http://andi34.github.io ~
Dear @Android-Andi & Ziyan,
thanks very much for quick updates. is 5521 build perfect?
~Omnivora~
"...stay success and keep tab 2 alive at least till 2020"
Astro Noid said:
Dear @Android-Andi & Ziyan,
thanks very much for quick updates. is 5521 build perfect?
~Omnivora~
"...stay success and keep tab 2 alive at least till 2020"
Click to expand...
Click to collapse
Seems like it doesn't fix simpin which i thought it will fix :/
~ All my work, news etc. on http://andi34.github.io ~
Hello nightly
http://dl.omnirom.org/espressowifi
http://dl.omnirom.org/espresso3g
Note: switching between homemade and nightly builds must be a clean flash!
~ All my work, news etc. on http://andi34.github.io ~
Still I have the same rebooting issue as on every 5.0+ ROM. It works fine for a while and then it soft reboots
Alright, since I resurrected a couple of NAND-bricked 16GB P31x0 ...
Bug 1: Tap on the "User image" in the notification shade - and try to set a avatar image for the "Owner" account - system crashes and reboots once you tap the "Save" button where you can crop the image you selected.
Bug 2: YouTube doesn't work overly well. When you start playing back a video it plays for 2-3 seconds then "stutters" and gives a "playback error". You can retry at which point it will work, but it's annoying (doesn't happen with the July/2 CM13 build). Also, YouTube only shows up to 480p in "Quality" where in CM13 it shows 720p (landscape full-screen).
Bug 3 (not sure if bug or "feature"): You can set the "Recent app" thingy to display "full screen" (no navbar / statusbar), but you cannot enable "extended desktop" anywhere for the UI itself.
Bug 4 (not sure it is a bug): I see a rather strange behavior on system boot...
- When I "shutdown" and have it plugged into the charger it shuts down, then the "charge anim" shows up and the screen is cleared but the backlight isn't turned off.
- When I start the system (from "shutdown" state) it seems as it does a "double boot" ... Galaxy Tab logo screen -> blank -> "reboot" (?) -> Galaxy Tab logo screen -> blank -> Omni boot anim.
All clean flashed with Delta's latest "base" Gapps package and SuperSU 2.65
I'll also slap a post into the CM13 thread as I see two minor problems with the latest build as well.

[8.1.0][14-01-2018] pure AOSP rom

I proud to annonce Android 8.1.0 on the Xperia XZ F8331 and F8332
So it's a beta, i'm testing it and i invite you to try it too.
State:
All working except otg
Stable
Download:
ROM LINK
Steps:
1) Flash OEM V8 for 8.0, Or This odm For 8.1 (thanks oshmoun!)
2)Flash Rom in Twrp.
3)Boot !
Enjoy !
If you have problems, use this TWRP
If not booting
Connect in fastboot, fastboot format system,fastboot erase boot, fastboot erase oem.
Flash the oem : fastboot flash oem odm_tone.simg
Flash the twrp in the Google drive upper
And flash the ROM
Should be booting now
Click to expand...
Click to collapse
XDA:DevDB Information
8.1.0 AOSP, ROM for the Sony Xperia XZ
Contributors
fastbooking
ROM OS Version: 8.x Oreo
Based On: AOSP
Version Information
Status: Stable
Current Beta Version: 8.0(android 8.1.0)
Beta Release Date: 2018-01-14
Created 2017-04-27
Last Updated 2018-01-14
is this really 7.1.1? has anyone on the forum tried this, and is there any screen shots available
Smacksmack206 said:
is this really 7.1.1? has anyone on the forum tried this, and is there any screen shots available
Click to expand...
Click to collapse
7.1.2 aosp not 7.1.1!
And need shot? Really!?
This is pure android. Like other aosp base rom.
I hope can combine this to XOSP source
Nice Glad you solved the build issues. Looking forward to the tutorial. Tried building myself the other day but failed...
cez81 said:
Nice Glad you solved the build issues. Looking forward to the tutorial. Tried building myself the other day but failed...
Click to expand...
Click to collapse
I can help you on discord if you want, i created a server dedicated to the Sony aosp
https://discord.gg/RRYuE
Smacksmack206 said:
is this really 7.1.1? has anyone on the forum tried this, and is there any screen shots available
Click to expand...
Click to collapse
7.1.2 and screenshot are here ?
fastbooking said:
7.1.2 and screenshot are here
Click to expand...
Click to collapse
Where? I don't see those
djgigi94 said:
Where? I don't see those
Click to expand...
Click to collapse
Screenshot section xD
fastbooking said:
Screenshot section xD
Click to expand...
Click to collapse
Sorry i saw them now xD the cam have a worst quality than stock right? Any bug for daily drive? I think to try it two days later. I need stock cam xD
djgigi94 said:
Sorry i saw them now xD the cam have a worst quality than stock right? Any bug for daily drive? I think to try it two days later. I need stock cam xD
Click to expand...
Click to collapse
Honestly I can't tell the difference between stock cam and aosp, I saw that the blurry effect when zoomed is less present when it's on aosp
I didn't got important bug today for my 1rst day of daily driver use.
Except sometimes the frequency are bit low so there are some slow down but a quick fix with kernel aduitor and boom it's fixed, will try to modify governors for kernel in the weekend
fastbooking said:
Honestly I can't tell the difference between stock cam and aosp, I saw that the blurry effect when zoomed is less present when it's on aosp
I didn't got important bug today for my 1rst day of daily driver use.
Except sometimes the frequency are bit low so there are some slow down but a quick fix with kernel aduitor and boom it's fixed, will try to modify governors for kernel in the weekend
Click to expand...
Click to collapse
Thanks for feedback. If you can post camera samples and we can tell about the quality
Just took a photo in low light and they're an absolute ton of noise in the photo. Is there a way to use a DRM patched AOSP kernel to restore the camera? Is that even a thing?
I just figured that the aosp kernel is ****ed up.
There only the two smalls cores available.
And the big are like non existent, so I'm gonna work with @DespairFactor and @_LLJY ( I hope ) to figure wtf just happened.
Sorry for the bug (ノಠ益ಠ)ノ彡┻━┻
[EDIT]
fixed, comming in the next build
Great Rom so far.
I noticed 2 Bugs:
-Google Camera seems to bee a little bit unstable. Sometimes the phone slows down and gets really hot by heavily using the camera. Panorama is also buggy.
-The phone charges, but Andoid isn't recognizing it.
ThePhilipp01 said:
Great Rom so far.
I noticed 2 Bugs:
-Google Camera seems to bee a little bit unstable. Sometimes the phone slows down and gets really hot by heavily using the camera. Panorama is also buggy.
-The phone charges, but Andoid isn't recognizing it.
Click to expand...
Click to collapse
What build are you using ?
You can check that in android info and kernel, give me the date of the kernel.
The 27/04 kernel have only 2 cores enabled, and the 29/04 build is more stable
Waiting for your responce.
I'm already using the 29/04 build.
GenomeX said:
7.1.2 aosp not 7.1.1!
And need shot? Really!?
This is pure android. Like other aosp base rom.
I hope can combine this to XOSP source
Click to expand...
Click to collapse
Oh and btw working with @_LLJY to port xosp and resurrection remix to the XZ ?
ThePhilipp01 said:
I'm already using the 29/04 build.
Click to expand...
Click to collapse
very weird, i'm pretty much a power user and my phone never overheated (depends what you call overheat)
I tried google camera apk from apk mirror, and the panorama is working fine, as well as the pic. quality is fine (see attachements 8MP)
My camera does not focus in the panoramic mode.
Perhaps the overheating was just a single case, but charging is definately not recognized by the system. The energy saving mode is still displayed in the notification.
ThePhilipp01 said:
My camera does not focus in the panoramic mode.
Perhaps the overheating was just a single case, but charging is definately not recognized by the system. The energy saving mode is still displayed in the notification.
Click to expand...
Click to collapse
try a clean install again for the charging issue, when I use the standard charger, the charging led is here and i get the charging animation, and it charges obviously.
Download the build again, backup ur important data,
download gapps mini, and flash the both files reboot and try now.
that's my config, if you need more google apps, you can download it via playstore or try a superior gapps package.
I'm still working on aosp to build a lineage rom, and my final goal is XOSP and resurrection remix, which are two roms that I love.

[ROM] Mokee

Hello,
I just open this thread to discuss about the rom and share issues.
The rom is very close to Android stock.
Issues that I have encountered (Build: 2017-10-08):
-Led notification is blinking very very fast (and change settings does nothing)
-Bluetooth audio (for music and video) does not work (I haven't tried calls)
Camera works, fingerprint is fast as in MIUI, run smoothly
You must format data before flashing (or it will bootloop)
Link: https://download.mokeedev.com/?device=chiron
Wahoux said:
Hello,
Issues that I have encountered (Build: 2017-10-08):
-Led notification is blinking very very fast (and change settings does nothing)
-Bluetooth audio (for music and video) does not work (I haven't tried calls)
Camera works, fingerprint is fast as in MIUI, run smoothly
You must format data before flashing (or it will bootloop)
Link: https://download.mokeedev.com/?device=chiron
Click to expand...
Click to collapse
- Bluetooth audio bug is same as that in Mokee Xiaomi Mi 6 rom, dev has replied in their forums the next nightly should have it fixed.
- Notification light bug will not be fixed until source is out (dev replied on when i listed the bug on Mokee forums)
Another thing ive noticed:
- The rom included a non-official xposed port for nougat which I cant remove, only disable
- Rom does not pass safetynet. Tried magisk+hide to no avail
Wahoux said:
Hello,
I just open this thread to discuss about the rom and share issues.
The rom is very close to Android stock.
Issues that I have encountered (Build: 2017-10-08):
-Led notification is blinking very very fast (and change settings does nothing)
-Bluetooth audio (for music and video) does not work (I haven't tried calls)
Camera works, fingerprint is fast as in MIUI, run smoothly
You must format data before flashing (or it will bootloop)
Link: https://download.mokeedev.com/?device=chiron
Click to expand...
Click to collapse
Ugh, no bluetooth audio is a killer for me. I do like the idea of a near stock Android though...
Safetynet is the killer for me. Need bank apps to work.
duraaraa said:
Safetynet is the killer for me. Need bank apps to work.
Click to expand...
Click to collapse
True, but if they pre-installed xposed and made it un-removable, then safety net will always fail...
I am loving this ROM! The battery life doesn't seem as good as eu rom. Also notice volume for YouTube seems low at Max setting. Other than that this is amazing stick room with Xposed and Gravity box!
---------- Post added at 09:00 PM ---------- Previous post was at 08:39 PM ----------
BTW... Bluetooth for calls works flawlessly
ugene1980 said:
- Bluetooth audio bug is same as that in Mokee Xiaomi Mi 6 rom, dev has replied in their forums the next nightly should have it fixed.
- Notification light bug will not be fixed until source is out (dev replied on when i listed the bug on Mokee forums)
Another thing ive noticed:
- The rom included a non-official xposed port for nougat which I cant remove, only disable
- Rom does not pass safetynet. Tried magisk+hide to no avail
Click to expand...
Click to collapse
Seems the buildbot is failing for our device
http://build.mokeedev.com/nightly/
ninjazin said:
Seems the buildbot is failing for our device
http://build.mokeedev.com/nightly/
Click to expand...
Click to collapse
Yep, hopefully someone will look into it soon.
ugene1980 said:
- Bluetooth audio bug is same as that in Mokee Xiaomi Mi 6 rom, dev has replied in their forums the next nightly should have it fixed.
- Notification light bug will not be fixed until source is out (dev replied on when i listed the bug on Mokee forums)
Another thing ive noticed:
- The rom included a non-official xposed port for nougat which I cant remove, only disable
- Rom does not pass safetynet. Tried magisk+hide to no avail
Click to expand...
Click to collapse
Safetynet doesn't pass with xposed.. uninstall it
Shoot. No VOLTE on T-Mobile.. Every time I make a call I notice it drops to 3g or H+. Anyone know a fix?
Also, when making a 3 way conference call the phone app force closes and can't open.
11/11 build of Mokee is just out~ go grab it!
ugene1980 said:
11/11 build of Mokee is just out~ go grab it!
Click to expand...
Click to collapse
Hi,
Woah... 11/11 released on 10/11 ! that is looking into the future
Anyways, jokes apart, did you try it and if so, is Bluetooth audio working ? It's something I would need
By the way : I just looked into the Mokee source. It seems they have the source for device and vendor.
Anyone knows if the msm8996 kernel for xiaomi would work with these ? tat would allow to build other ROM's.
Regards.
NexusPenguin said:
Hi,
Woah... 11/11 released on 10/11 ! that is looking into the future
Anyways, jokes apart, did you try it and if so, is Bluetooth audio working ? It's something I would need
By the way : I just looked into the Mokee source. It seems they have the source for device and vendor.
Anyone knows if the msm8996 kernel for xiaomi would work with these ? tat would allow to build other ROM's.
Regards.
Click to expand...
Click to collapse
Have not tried it~ (bt-audio should be fixed as the mi6 had the same issue and is fixed with currently nightly, dev also added aptx+aptxhd in addition to a2dp)
Mix2 hasnt had it's source released, the maintainer for mix2 happens to be the maintainer for the mi6 (which had it's sources released). As the both use smiliar hardware (sd835, camera sensor) they messed around to get the mix2 rom up. Which is why somethings will not work properly until mix2 sources are released (like the prox sensor and the notif light)
ugene1980 said:
Have not tried it~ (bt-audio should be fixed as the mi6 had the same issue and is fixed with currently nightly, dev also added aptx+aptxhd in addition to a2dp)
Mix2 hasnt had it's source released, the maintainer for mix2 happens to be the maintainer for the mi6 (which had it's sources released). As the both use smiliar hardware (sd835, camera sensor) they messed around to get the mix2 rom up. Which is why somethings will not work properly until mix2 sources are released (like the prox sensor and the notif light)
Click to expand...
Click to collapse
OK... anywyas : 10/11 doesn't work properly it seems... Got a ****load of errors at boot and then it's stuck at "Looking for updates"
Back to EPIC ROM...
Regards.
NexusPenguin said:
OK... anywyas : 10/11 doesn't work properly it seems... Got a ****load of errors at boot and then it's stuck at "Looking for updates"
Back to EPIC ROM...
Regards.
Click to expand...
Click to collapse
that sucks...Full wipe?
Downloading now. First I Will try dirty over which I am currently running. If that doesn't work I will do a full wipe. Last version of mokee running great for me
stu5797 said:
Downloading now. First I Will try dirty over which I am currently running. If that doesn't work I will do a full wipe. Last version of mokee running great for me
Click to expand...
Click to collapse
It was. Just needed BT audio. if you confirm i'll switch ASAP
On the newest mokee! You need to wipe everything and do a clean install. Dirty flash and you get a bunch of errors and need to reboot into recovery
stu5797 said:
On the newest mokee! You need to wipe everything and do a clean install. Dirty flash and you get a bunch of errors and need to reboot into recovery
Click to expand...
Click to collapse
It works? BT audio? ::highfive:

[ROM][7.1.2] Unofficial LineageOS 14.1 for Galaxy S7 Edge

Unofficial LineageOS for Galaxy S7 Edge
Super smooth LineageOS build based on latest sources
What’s working
Ambient display
Camera with latest fixes
Microphone
Fingerprint reader
All sensors
SD Card
Capacitive backlight options
Wi-Fi Hotspot
Bugs
- You cannot open apps when RAM is full unless you close some active ones. *fixed*
- Mic recording not working *fixed*
- You tell me
Install Instructions
1. Download ROM.
2. Wipe dalvik, cache, data and system.
3. Flash the rom in recovery.
4. Reboot device.
Download :
Build 1 :
https://drive.google.com/open?id=0B6RG6jVMM3Yvdkl3clByTTF2U1E
Build 2 :
https://drive.google.com/file/d/0B6RG6jVMM3YveGNtc2MtXzhid1k/view?usp=sharing
Telegram group :
https://t.me/joinchat/FPu8TkPADo26EgjbVon3Iw
Credit :
Thanks to @NoXXX for helping test builds
Thank you to @ProtoDeVNan0 for all his help and support
deedwar
Andrw0830
FevaX
Jesec
SaschaNes
Thanks to deedwar and Andrw0830 for sources
XDA:DevDB Information
Unofficial LineageOS, ROM for the Samsung Galaxy S7 Edge
Contributors
dylanneve1
Source Code: [url]https://github.com/LineageOS[/URL]
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Based On: LineageOS
Version Information
Status: Stable
Created 2017-10-17
Last Updated 2017-10-17
Just tried this rom for fun ... and what do you know? The first LineageOS for hero2lte with a working good quality camera. If bluetooth is OK, too, this is a great job! Thanks!
stepstra said:
Just tried this rom for fun ... and what do you know? The first LineageOS for hero2lte with a working good quality camera. If bluetooth is OK, too, this is a great job! Thanks!
Click to expand...
Click to collapse
Thanks, Bluetooth should work fine
how about fixing crackling speaker with google assistant on?
btw great to see more aosp roms so keep up
darkoj2007 said:
how about fixing crackling speaker with google assistant on?
btw great to see more aosp roms so keep up
Click to expand...
Click to collapse
Still here and thanks
dylanneve1 said:
Still here and thanks
Click to expand...
Click to collapse
So awesome to see You here! For everyone who doesn't know, Dylan is a really nice Dev who used to build roms outside XDA for some time, but he finally joined us!
just installed this, photos are still coming out in ultra low quality (blurring with no definition). Am I missing something here? using stock camera
shreddeddonut said:
just installed this, photos are still coming out in ultra low quality (blurring with no definition). Am I missing something here? using stock camera
Click to expand...
Click to collapse
Use HTC cam, camera in Gapps package doesn't work
Gapps package overrides snap if it includes Google camera
stepstra said:
Just tried this rom for fun ... and what do you know? The first LineageOS for hero2lte with a working good quality camera. If bluetooth is OK, too, this is a great job! Thanks!
Click to expand...
Click to collapse
Is battery better now? A few updates ago battery would only last 4ish hours and super fast drain with screen off.
Hey is this patched against Krack? That wifi hack
Hi
Thanks for your efforts
Will I receive new release ota if I install this rom?
Cheers
Yves911 said:
Hi
Thanks for your efforts
Will I receive new release ota if I install this rom?
Cheers
Click to expand...
Click to collapse
No you would not
DreddJudge said:
Hey is this patched against Krack? That wifi hack
Click to expand...
Click to collapse
Should be
This ROM is running very good on my end with Kermit kernel. I think tomorrow I'll run the kernel it comes with to see how that compares. I'd like to hear the dev thoughts on custom over included kernel for battery or performance or just stability.
What's the correct flash order if I want working root? Is the below correct?
1. ROM
2. Gapps
3. SuperSu from lineage site
Can I use magisk or will I keep getting google services errors?
New build coming soon
Changelog
- Audio recording issue fixed
- RAM issue should be fixed
Viceroy_N said:
What's the correct flash order if I want working root? Is the below correct?
1. ROM
2. Gapps
3. SuperSu from lineage site
Can I use magisk or will I keep getting google services errors?
Click to expand...
Click to collapse
That is correct order. I would use CM root. I wouldn't recommended magisk unless you absolutely need it causes lag, stutter and fc
dylanneve1 said:
New build coming soon
Changelog
- Audio recording issue fixed
- RAM issue should be fixed
Click to expand...
Click to collapse
does this mean crackling speaker also?
darkoj2007 said:
does this mean crackling speaker also?
Click to expand...
Click to collapse
To fix crackling issue turn off "Ok Google detection"
dylanneve1 said:
To fix crackling issue turn off "Ok Google detection"
Click to expand...
Click to collapse
we know about this but thanks for reply anyway keep up the good work

[Discussion] NitrogenOS Oreo 8.1.0 [Out of Order]

There is an official Thread now, so this Thread is out of order!
https://forum.xda-developers.com/on...ice-development/rom-nitrogen-os-beta-t3737654​
NitrogenOS!
Important!
I am NOT the owner or developer of this ROM!
All credit goes to @xyyx
We are all very thankful for his work!
Please if you want to post something on this thread, do NOT
-post something that was already said before
-tell us bugs which are already well known
-ask for new features as I am not the developer!
-blame @xyyx for bugs or better, don't mention him at all!
_________________________________________________________________________
Downloads
Link to the ROM
OpenGApps unofficial
Magisk Beta
Firmware for OP3
unofficial TWRP
________________________________________________________________________________________
What is currently not working?
- VoLTE, but Vo2G is working fine.
Please do NOT tell us bugs which are already well known!
It can be very annoying if everybody is reporting the same bug again and again.
_____________________________________________________________________________________
Credits:
xyyx for his wonderful ROM!
@topjohnwu for Magisk!
@eng.stk for TWRP!
@Nezorflame for his OpenGapps build server!
@jamal2367 for the Firmware zips!
​
hows Camera qualitie, and hows sot?
I'm using modded GCam and quality is good enough.
Battery life is just okay , Mobile Network Standby is my biggest drain . I have 43mins SOT with 77% remaining...
How do I flash this? I'm on latest TWRP and have RR Android 7.1.2 installed. When I try to flash this (or other 8.x-based ROMs, I'm stuck at "Patching System unconditionally at about 7-10%).
Android 7.1.x-based ROMs flash just fine. Any suggestions?
fattymcdirty said:
How do I flash this? I'm on latest TWRP and have RR Android 7.1.2 installed. When I try to flash this (or other 8.x-based ROMs, I'm stuck at "Patching System unconditionally at about 7-10%).
Android 7.1.x-based ROMs flash just fine. Any suggestions?
Click to expand...
Click to collapse
Have you applied the latest firmware before flashing?
kickassdave said:
Have you applied the latest firmware before flashing?
Click to expand...
Click to collapse
OpenBeta or Stable Oreo Firmware?
Something short.
Build: 20171124
I'm happy :silly:
Bugs
- Sometimes, Home button stop working after deep sleep, just reboot or use add fingerprint to got it working again.
- Some random FC messages (2 today) (doesn't affect daily usage).
- Can't share files via Hotspot with Solid Explorer (Classic and Material) Give FC and keeps draining battery in Background even deleting app data and force stop.
- Same with Camera Roll, after opening it keeps draining Battery in Background doesn't matter what.
Avoiding these little things, nothing to reproach. In terms of BB is working better than any Nougat ROMs for me and performance and smoothness is totally decent. Some things doesn't appear in battery drain list (ADM and others little things, nothing to worry) and obviously the three I uninstalled (Solid, Solid Classic and Camera Roll)
By the way, H+ all the day.
new update from 27nov is up! :good:
What's the recommended firmware for this ROM
rankin1 said:
What's the recommended firmware for this ROM
Click to expand...
Click to collapse
OP3 work fw stable5.0 or ob27
ChonDoit said:
Something short.
Build: 20171124
I'm happy :silly:
Bugs
- Sometimes, Home button stop working after deep sleep, just reboot or use add fingerprint to got it working again.
- Some random FC messages (2 today) (doesn't affect daily usage).
- Can't share files via Hotspot with Solid Explorer (Classic and Material) Give FC and keeps draining battery in Background even deleting app data and force stop.
- Same with Camera Roll, after opening it keeps draining Battery in Background doesn't matter what.
Avoiding these little things, nothing to reproach. In terms of BB is working better than any Nougat ROMs for me and performance and smoothness is totally decent. Some things doesn't appear in battery drain list (ADM and others little things, nothing to worry) and obviously the three I uninstalled (Solid, Solid Classic and Camera Roll)
By the way, H+ all the day.
Click to expand...
Click to collapse
Are you on root? Are you using any app to save battery like Greenify?
ssaikiran said:
Are you on root? Are you using any app to save battery like Greenify?
Click to expand...
Click to collapse
Root, Unofficial Snapshot Magisk 14.5.2 by Kantjer. Official should work too without problems.
Only Servicely, but its no really necessary, the ROM by itself have a great BB.
I haven't used Nitrogen since I had the Hammerhead, but damn, this is nice. I'd say the best Oreo alternative so far for our OP3.
Can anyone tell me if this rom has an always on display feature? I can't find the features list of this rom....
neildalal said:
Can anyone tell me if this rom has an always on display feature? I can't find the features list of this rom....
Click to expand...
Click to collapse
Yes
Settings > Personalisation > Device Features > Always on Display
skymera said:
Yes
Settings > Personalisation > Device Features > Always on Display
Click to expand...
Click to collapse
Thanks a lot, can you show me a screenshot? I'll install the rom if I like it?
neildalal said:
Thanks a lot, can you show me a screenshot? I'll install the rom if I like it
Click to expand...
Click to collapse
Not sure how to do that - Everytime I go to take a screenshot, the phone wakes.
skymera said:
Not sure how to do that - Everytime I go to take a screenshot, the phone wakes.
Click to expand...
Click to collapse
Lol ok?
I guess I'll just install the rom, thanks anyways
But is it something like this?
neildalal said:
Lol ok
I guess I'll just install the rom, thanks anyways
But is it something like this?
Click to expand...
Click to collapse
Near enough, from what I can tell.
Does the latest version have permissive or enforcing selinux?

Categories

Resources