YOU MUST FORMAT YOUR SD CARD BEFORE CONTINUING WITH THIS DUAL-BOOT MOD! I will not be held responsible for your device!
INSTALLATION GUIDE:
Download the following zips:
-BOOT_LINEAGE
-BOOT_FULMICS
-LineageOS ROM
Partition your SD-Card Following this:
-1st Partition(External Storage) as "FAT32" or "Ext4" @ Reasonable size as this will be detected as external SD-Card.
-2nd Partition(System) as "Ext4" @ 2048MB
-3rd Partition(Cache) as "Ext4" @ 1024MB
-4th Partition(Data) as "Ext4" @ Remainder of the space left.
Or Click HERE for a visual representation
Boot to TWRP.
Make a back-up of Fulmics System(Should already have this installed).
Install LIneageOS from the zip you just downloaded.
Back-up LineageOS system.
Restore Fulmics System and check that it still boots.
Then Flash BOOT_LINEAGE.zip
Reboot to TWRP.
Now you are using your External SD-Card as System and Data (Boot 1).
Restore your back-up of lineageOS that you made earlier.
When its done reboot and wait for lineage to boot.
Now every time you wish to use LineageOS reboot into TWRP and flash BOOT_LINEAGE.zip and when you wish to use Fulmics reboot into TWRP and flash BOOT_FULMICS.zip
Profit$$$
Credits to:
-Rahed97 for LineageOS
-Xpirt for FumicsRom
-Me for Dual-boot zips and some under the hood stuff.
I just tested and can confirm the boot_fulmics.zip will also work for stock rom
RESERVED2
J0SH1X said:
I just tested and can confirm the boot_fulmics.zip will also work for stock rom
Click to expand...
Click to collapse
Has this been done before, that is, dual boot for a source built rom and a stock rom?
Very impressive, well done.
nchc said:
Has this been done before, that is, dual boot for a source built rom and a stock rom?
Very impressive, well done.
Click to expand...
Click to collapse
indeed its for Source build roms and stock roms
Can we use only lineage rom or do we have to use al 2 of tem ?
And do we need gapps with the lineage rom , and wich ones are you using then ?
Thank for the hard work m8 , its much apreciated
What a strange way to give us LineageOS...
odysseus84 said:
What a strange way to give us LineageOS...
Click to expand...
Click to collapse
This is for who wants to try unstable lineage OS but still want stock as dayly drives without reflash system, I think
Slightly OT but does anyone know what the process is like for LOS on the G6? It's a bit odd that the only dedicated unofficial thread we had is locked.
Any way to move LineageOS to internal memory and stock ROM to SD? Thanks.
What are the bugs on the LineageOS build?
EvilHowl said:
Any way to move LineageOS to internal memory and stock ROM to SD? Thanks.
Click to expand...
Click to collapse
LineageOS is faster on external SD. If you want to swap it around just edit fstab in the boot.img and recovery.img
Valkiry said:
LineageOS is faster on external SD. If you want to swap it around just edit fstab in the boot.img and recovery.img
Click to expand...
Click to collapse
Why do you think that?
Our UFS 2.0 memory is waaay faster than a SD card. Even my UHS-III SD card can get only up to ~90MiB/s on writing and our internal memory can get over 400MiB/s.
Is there a thread for the lineage development?
schuck_norrisch said:
Is there a thread for the lineage development?
Click to expand...
Click to collapse
Lineage will be official soon, just working on it before releasing it fully.
nima0003 said:
Lineage will be official soon, just working on it before releasing it fully.
Click to expand...
Click to collapse
Why? I mean, official is overrated. Isn't it?
nima0003 said:
Lineage will be official soon, just working on it before releasing it fully.
Click to expand...
Click to collapse
Thats very good news!
Will it be compatible to the h870ds (dual sim) version?
I'm thinking about getting a g6 but I will not buy it unless it has lineageOS support.
I really appreciate your work. Please make sure to make donations possible, when it is available!
Without lineageOS I don't like to use an android phone anymore..
obermeier said:
Thats very good news!
Will it be compatible to the h870ds (dual sim) version?
I'm thinking about getting a g6 but I will not buy it unless it has lineageOS support.
I really appreciate your work. Please make sure to make donations possible, when it is available!
Without lineageOS I don't like to use an android phone anymore..
Click to expand...
Click to collapse
NO
https://www.lineageoslog.com/14.1/h870
Christmas arrived to early this year
locki said:
https://www.lineageoslog.com/14.1/h870
Christmas arrived to early this year
Click to expand...
Click to collapse
Pro tip: use open camera so all 3 cams are working
Related
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
DOWNLOAD: https://dl.twrp.me/gts210vewifi
BUGS:
If you have found a bug, please consider posting it to our github issues log and then I'll report to Dess_Troy. If you have a significant problem that cannot be answered in this thread, your best bet is to PM Dees_Troy directly, contact us via our website, or find us in our IRC channel below. If you see someone that's struggling, feel free to point it out to us. We need your help to help us keep track of all of our devices! Thanks!
SUPPORT:
Live support is available via #twrp on Freenode with your IRC client or just click this link.
XDA:DevDB Information
[RECOVERY][T813] TWRP 3.3.0-0 Touch Recovery [OFFICIAL], ROM for the Samsung Galaxy Tab S2
Contributors
LuK1337, luca020400, Olivier
Source Code: https://github.com/TeamWin
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Version Information
Status: Testing
Created 2017-01-24
Last Updated 2019-04-15
Wonderful to see this official! Just great!
Flashed!!
It works nicely and looks very good!
Thanks for this beautiful present
link dont work....pls reup...thy
hasbai said:
link dont work....pls reup...thy
Click to expand...
Click to collapse
Is it good now?
yes...the link works...can u make to a TWRP flash mod?
hasbai said:
yes...the link works...can u make to a TWRP flash mod?
Click to expand...
Click to collapse
Flash mod?
Can't you just flash it with heimdall?
sry...i mean twrp zip
hasbai said:
sry...i mean twrp zip
Click to expand...
Click to collapse
Use heimdall or flash the image in twrp ( there's a switch on the bottom I think ).
Hi,
Thanx a lot to bring some love to our Value Edtion :good::fingers-crossed:
Dumb question maybe but when I click on the link it takes me "TWRP for gts210vewifi". Thought this was for the SM-T813 9.7" tablet???
pastorbob62 said:
Dumb question maybe but when I click on the link it takes me "TWRP for gts210vewifi". Thought this was for the SM-T813 9.7" tablet???
Click to expand...
Click to collapse
Yes, that's the codename of it.
Just two things I would like to report:
Brightness level doesn't work. It's always max.
Second, not sure if this is a recovery issue, I made a backup of the stock rom. The rom was pin protected, but after restoring it the pin was not recognized. So I had to reset device in order to use the back up. It erased my sd card too, but I had another external backup up of the data, so it was safe
New twrp!!! Flashing it now!!!
varben said:
Just two things I would like to report:
Brightness level doesn't work. It's always max.
Second, not sure if this is a recovery issue, I made a backup of the stock rom. The rom was pin protected, but after restoring it the pin was not recognized. So I had to reset device in order to use the back up. It erased my sd card too, but I had another external backup up of the data, so it was safe
Click to expand...
Click to collapse
>Brightness level doesn't work. It's always max.
I forgot to fix that yesterday, I'll get that sorted out today ~ https://gerrit.twrp.me/#/c/2078
hmm, maybe I did something stupid here. Flashed the new twrp 3.0.3-2 through twrp and the tablet boots only in twrp now... the only selection I saw on which partition to flash was "boot"... so it boots only in recovery now
varben said:
hmm, maybe I did something stupid here. Flashed the new twrp 3.0.3-2 through twrp and the tablet boots only in twrp now... the only selection I saw on which partition to flash was "boot"... so it boots only in recovery now
Click to expand...
Click to collapse
Oh wow, I forgot to add /recovery to fstab. Thanks for reporting this issue...
LuK1337 said:
Oh wow, I forgot to add /recovery to fstab. Thanks for reporting this issue...
Click to expand...
Click to collapse
So, if I reflash the rom now without wipes, will it be ok to reboot to system?
varben said:
So, if I reflash the rom now without wipes, will it be ok to reboot to system?
Click to expand...
Click to collapse
Yes.
So, for the moment, who wants to flash this needs to use the official twrp app from play store.
https://play.google.com/store/apps/details?id=me.twrp.twrpapp&hl=en
Edit: @LuK1337 is so fast!!! A new fixed TWRP now! Forget the above...
Hello fellow Redmi S2 community
We finally have some custom rom/ Project Treble roms available to use
Please NOTE: Most are unstable as daily drivers as we still don't have developer support for our little device
Disclaimer
You know the drill, I'm not responsible for what happens to your device
good luck!
Let's begin!
I have been testing different project treble roms AND the Miui base roms (ranging from stable Miui9 - 10 and beta's) to find the most 'stable' daily driver
The best combination to date is using the Sep 11th MIUI 10 global stable with Resurrection Remix.
However if you do want to experiment, I highly recommend doing so as the Project Treble roms are updating constantly.
I will leave links to recommended ARM - A roms below and the recommended MIUI 10 base roms to flash over.
What you need:
Miui Base rom both Fastboot & Recovery (I recommend MIUI 10 stable)
Project Treble GSI (gemeric system.img)
Fastboot installed on your PC - there are plenty of tutorials, use google
GAPPS (please note I have had a lot of difficulties installing gapps and HIGHLY recommend you download a rom with gapps go pre-installed. You can use apps like LINK2SD to delete the Go-version and install the fulll version later)
A little bit of patience and time - first boots can take 5-10minutes
MIUI 10 Roms
https://www.theandroidsoul.com/xiaomi-redmi-s2-update/
[ARM - A] Project Treble Forums
https://forum.xda-developers.com/pr...-device-development/index-one-thread-t3812343
Fastboot for; Windows - Mac - Linux
https://www.lifehacker.com.au/2014/...ll-androids-adb-and-fastboot-tools-on-any-os/
Download links to Roms: Check the forum link above for more ROMS
9
https://sourceforge.net/projects/havoc-os/files/
8.1.0
https://sourceforge.net/projects/resurrectionremix-oreo/files/armaonly/
https://androidfilehost.com/?w=files&flid=271118
https://androidfilehost.com/?w=files&flid=278902
https://androidfilehost.com/?fid=746163614322269351
Open GAPPS - I RECOMMEND USING MICRO-NANO-PICO. There are plenty of installation issues
https://opengapps.org/
Known Issues
There are many, let me know and I will compile a list
Brightness scaling
Auto-brightness
Instructions
Backup ALL data & partitions
Boot into TWRP recovery
Wipe data/factory reset
Wipe data (backup)
Flash MiUi stock rom VIA fastboot
When rom flash is complete DO NOT BOOT THE ROM
Reboot into Fastboot
Make sure your GSI or system.img is in your Fastboot folder
Run this command: fastboot flash system the-name-of-your-rom.img
For example: fastboot flash system-180818-arm-aonly-vanilla-nosu.img
Now the ROM has been flashed, you can install TWRP, Magisk and GAPPS or just reboot into your new rom
If I helped you please thank me, it helps a lot enjoy your new project treble roms!
DrDrag0n said:
Hi guys
First of all I am NOT A DEVELOPER!
There are plenty of issues with every AOSP treble build but they can function OKish for daily use.
You can install almost any Project Treble GSI that has support fo devicesr: ARM - A
I recommend using ResurrectionRemix - it has been the most stable for daily use I have experienced so far
https ://sourceforge. net/projects/resurrectionremix-oreo/files/armaonly/
^ ^
-remove the spaces-
You need the system.img (Generic System Image - these are used for project treble roms) to proceed further.
THIS WILL DELETE ALL OF YOUR DATA. MAKE A BACKUP OR SAVE YOUR FILES ELSEWHERE.
and of course I am not responsible for anything that happens to your phone, do this at your own risk and be prepared to face bugs! and use google to find out how to overcome them.
good luck my friends!
Known issues:
You tell me
Instructions :
Download the latest .img build and GApps
Download the latest Miui 10 Beta recovery rom current - MIUI 10 8.8.30
Reboot to TWRP recovery
Wipe data/factory reset
Wipe data (backup)
Advanced wipe- system cache dalvik data
Flash latest stock rom - MIUI 10 8.8.30 beta
Reboot to fastboot
Plug your phone into your computer
copy your downloaded GSI.img to your adb&fastboot folder
Flash via fastboot: fastboot flash system the-name-of-your-rom.img
Reboot into TWRP & install Magisk
- PLEASE NOTE I HAVE HAD PROBLEMS WITH INSTALLING Gapps, PLEASE TRY AND FIND A ROM THAT COMES WITH Gapps. YOU CAN USE L2SD TO DELETE THE GO VERSION AND INSTALL THE FULL VERSIONS FROM PLAY STORE LATER-
Reboot
I am not a developer, this is not my main device but I am here to help solve any problems or try and help find solutions!
If any developer would like to give us support please let me know!
Click to expand...
Click to collapse
have you tried it
Zaid Sheikh said:
have you tried it
Click to expand...
Click to collapse
Yes tried and succeeded! ResurrectionRemix seems to be most stable to date but they update all the time so experiment yourself
DrDrag0n said:
Yeah I am using ResurrectionRemix right now. Pretty sure the post was clear about that XD
Click to expand...
Click to collapse
did u try the 64 bit one?
Is it 64bit or not?
DrDrag0n said:
Yeah I am using ResurrectionRemix right now. Pretty sure the post was clear about that XD
Click to expand...
Click to collapse
Is it 64bit? Is it stable to use as a daily driver?
DrDrag0n said:
Yeah I am using ResurrectionRemix right now. Pretty sure the post was clear about that XD
Click to expand...
Click to collapse
wmfaiz said:
did u try the 64 bit one?
Click to expand...
Click to collapse
Gohar___Nadeem said:
Is it 64bit? Is it stable to use as a daily driver?
Click to expand...
Click to collapse
our system only support 32 bit only... dont try the 64bit... it might bring harm to your device
What about jio volte is it working on it and if yes then how because in minbe it is working
Zaid Sheikh said:
have you tried it
Click to expand...
Click to collapse
Yes, ResurrectionRemix works nicely
wmfaiz said:
did u try the 64 bit one?
Click to expand...
Click to collapse
Yes I have tried the 64 bit ROMs,
They do not boot
Gohar___Nadeem said:
Is it 64bit? Is it stable to use as a daily driver?
Click to expand...
Click to collapse
It's kind of stable, it gets better after every GSI update. ResurrectionRemix is the most stable that I have tried
Zaid Sheikh said:
What about jio volte is it working on it and if yes then how because in minbe it is working
Click to expand...
Click to collapse
Use MagiskModule VoEnabler to enable volte
If you try arm64aonly it will stuck at mi logo.
DrDrag0n said:
Yeah I am using ResurrectionRemix right now. Pretty sure the post was clear about that XD
Click to expand...
Click to collapse
I wanna use resurrection remix. Please give me link
M2S73R said:
I wanna use resurrection remix. Please give me link
Click to expand...
Click to collapse
search on google you will get it
M2S73R said:
I wanna use resurrection remix. Please give me link
Click to expand...
Click to collapse
Hey man, link is in OP, there are 2 spaces that need to be removed
M2S73R said:
I wanna use resurrection remix. Please give me link
Click to expand...
Click to collapse
https://sourceforge.net/projects/resurrectionremix-oreo/files/armaonly/
can any1 confirm if volte works or not plz ?
xoloera2x said:
can any1 confirm if volte works or not plz ?
Click to expand...
Click to collapse
It depends what GSI you choose to work, but VOLTE is working on resurrection remix
Updated list of roms
New guide - better experience
Direct download links
Looking forward to seeing more Project Treble roms out there!
Please support rom
Some applications are not supported because they support 64-bit architecture, which refmi s2 cpu can run 64-bit version. However, the developer has only 32-bit in operating system, which causes a lot of problems. One of the major problems is that you can not install a 64 bit application. Please help make this a ROM.
Users of Redmi s2 have asked the developers of Xiaomi's way to make a new ROM that supports 64-bit architecture, but has ignored it and has never talked about it.
70-72Hz Mod for OnePlus 6!
So here it is guys! Our own Display OC mod! Ever since Mi9 got one I really wanted to make one for OP6 too and after many sleepless nights and compiling various things, here it is! Let's talk about couple of things, is it safe? Mi9 users and K20 Pro users have a similar mod and they reported no screen damage so far. I will be testing this mod 24/7 and report how it affects my screen. I also used lower values just because 75Hz seemed bit unstable so this mod is pretty safe I'd say. 70Hz runs really.. well. Smoothly! :laugh: Can You notice the difference? Yes! Shocking how much difference there is in 10Hz. Battery life? Probably no impact at all since the OC is pretty small.
Can I flash it on 6T, santoni, vince, my new mt6580 phone?? No! Even though it won't brick Your phone, it simply won't work.
Compatibility? Most likely all Pie roms, maybe even without root.
How to Install:
Windows Users:
Extract the zip somewhere.
Reboot to fastboot and plug Your phone in.
Double tap on 70hz_recommended_flasher_windows.bat (Don't run it as admin)
Wait till it finishes flashing.
Reboot and enjoy!
Check screenshots in attached images!
Download:
70_72Hz Mod for OnePlus6
Stock 60Hz Flasher for OnePlus6
If You have any other problems, just ask here on XDA or for the fastest support PM me or ask someone in my group on Telegram
Join my group!
If You like my work, You can support me here!
https://www.paypal.me/protodevnan0
Credits:
ZhenXin and Andy Chan for original dtbo mod idea.
FunkWizard/OnePlus for latest firmwares!
OnePlus for creating OP6!
My friend Dylan for always supporting me
If I forgot anyone, just PM me on Telegram!
XDA:DevDB Information
[MOD] 70-72Hz Display Mod for OnePlus6 , Tool/Utility for the OnePlus 6
Contributors
ProtoDeVNan0
Source Code: https://github.com/OnePlusOSS/android_kernel_oneplus_sdm845/tree/oneplus/SDM845_P_9.0_Beta
Version Information
Status: Testing
Created 2019-07-27
Last Updated 2019-07-27
Reserved for future feedback
Edit: Can someone move it to mods/themes? Idk why it got posted here
Can you please make one for 6T?
Interesting. How to uninstall if something goes wrong?
And therefore, when do we need to flash it again? After every ROM update?
Tomatot- said:
Interesting. How to uninstall if something goes wrong?
And therefore, when do we need to flash it again? After every ROM update?
Click to expand...
Click to collapse
Having the same questions. Thanks in advance.
Tomatot- said:
Interesting. How to uninstall if something goes wrong?
And therefore, when do we need to flash it again? After every ROM update?
Click to expand...
Click to collapse
Flash stock ota again
Works just great. ?
Tomatot- said:
Interesting. How to uninstall if something goes wrong?
And therefore, when do we need to flash it again? After every ROM update?
Click to expand...
Click to collapse
I'll post a back to stock flasher soon. And after every Full OxygenOS OTA You have to reflash it.
Twrp flashable zip ? I don't have my pc currently
ProtoDeVNan0 said:
I'll post a back to stock flasher soon. And after every Full OxygenOS OTA You have to reflash it.
Click to expand...
Click to collapse
Thanks. Does it modify the vendor partition or the system one? I'm wondering for custom roms udpates.
Tomatot- said:
Thanks. Does it modify the vendor partition or the system one? I'm wondering for custom roms udpates.
Click to expand...
Click to collapse
It modifies dtbo partition. So custom roms most likely won't ever touch this partition. Stock OTAs will though.
i installed it and it works............thank you
nice one
Where can I find the source code?
Macusercom said:
Where can I find the source code?
Click to expand...
Click to collapse
There's no source. It's just a modded stock dtbo.img.
how to uninstall it?
Can we flash this img via TWRP?
ProtoDeVNan0 said:
There's no source. It's just a modded stock dtbo.img.
Click to expand...
Click to collapse
But what did you mod?
igagan_ said:
how to uninstall it?
Click to expand...
Click to collapse
You can use 60Hz flasher. It will restore stock dtbo
Bloodwin said:
Can we flash this img via TWRP?
Click to expand...
Click to collapse
If Your TWRP supports dtbo flashing then sure. But if it doesn't then fastboot is the only option I guess.
I feel like I'm gonna get a speeding ticket on my way back home after I finish doing groceries. I need to flash this ASAP. ?
Kernel source:
https://github.com/omnirom/android_kernel_nubia_nx609j
Device tree:
https://github.com/omnirom/android_device_nubia_nx609j
Download:
omni-9-20190902-nx609j-HOMEMADE.zip
TWRP: twrp-3.3.1-0_CPTB-20190901-01-SAR-NX609J.img
How to flash:
Make sure you're on latest Pie firmware
Boot to TWRP
Wipe data
Flash ROM
Optional: flash gapps
Reboot
Known issues:
-You tell me
XDA:DevDB Information
OmniROM 9.0, ROM for the ZTE nubia Red Magic
Contributors
vache
Source Code: https://github.com/omnirom
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
Based On: AOSP
Version Information
Status: Beta
Beta Release Date: 2019-08-28
Created 2019-08-28
Last Updated 2019-09-03
It is working fine with Chinese oreo also. If anyone needs help then i can help them
Here are some screen shots
Nice, I will try it ASAP...
ABM30 said:
Nice, I will try it ASAP...
Click to expand...
Click to collapse
I had issues with Chinese firmware of pie. Twrp was not booting but for developer it was botting fine. That a why I had to flash Chinese firmware first 2.26 and then after flashing you need again flash those files in fastboot after unlocking it.
methuselah said:
I had issues with Chinese firmware of pie. Twrp was not booting but for developer it was botting fine. That a why I had to flash Chinese firmware first 2.26 and then after flashing you need again flash those files in fastboot after unlocking it.
Click to expand...
Click to collapse
How much time needs to boot up? It is already 7 min and still on omni booting animation
I think I need to start over (even i have wiped with original recovery but...)
P.S You have used 2.26 CN or 2.36CN ROM?
EDIT:
Which version of TWRP are you using? I am on 3.3.1.
EDIT 2
OK, I am in OMNI! ...with Bluespark TWRP!
@ABM30 are you on telegram?
methuselah said:
@ABM30 are you on telegram?
Click to expand...
Click to collapse
The firmware of the connection is invalid？
Where can I download omnirom9.0？
New build up !
omni-9-20190902-nx609j-HOMEMADE.zip
Install process has change, Pie firmware is new mandatory. Also make sure to use the TWRP linked in OP.
Changelog:
Switch to P kernel sources
Fixed encryption
Fixed WFD (Wifi display)
...
vache said:
omni-9-20190902-nx609j-HOMEMADE.zip
Install process has change, Pie firmware is new mandatory. Also make sure to use the TWRP linked in OP.
Changelog:
Switch to P kernel sources
Fixed encryption
Fixed WFD (Wifi display)
...
Click to expand...
Click to collapse
So it begun
navik said:
The firmware of the connection is invalid？
Where can I download omnirom9.0？
Click to expand...
Click to collapse
Download the 3.19 Chinese firmware and flash that first.
Thank you so much, i will try it in this week, and spread this on red magic pages comments, everyone already seems hopeless... Thanks @vache, thanks @methuselah too ?
Thank you so much, i will try it in this week, and spread this on red magic pages comments, everyone already seems hopeless... Thanks @vache, thanks @methuselah too ?
ianseer said:
Thank you so much, i will try it in this week, and spread this on red magic pages comments, everyone already seems hopeless... Thanks @vache, thanks @methuselah too ?
Click to expand...
Click to collapse
Thanks @vache only. Not me. He is the only one because of which we got omni pie.
Btw... The RGB light features, is it gone? Or we need to port it from the cn rom to get such features?
methuselah said:
So it begun
Download the 3.19 Chinese firmware and flash that first.
Click to expand...
Click to collapse
i need to install chinese first then in twrp wipe system and data then flash the omnirom 9.0 right?
i need to wipe system or leave it?
alrfa3y-1 said:
i need to install chinese first then in twrp wipe system and data then flash the omnirom 9.0 right?
i need to wipe system or leave it?
Click to expand...
Click to collapse
Yes first install chinese, then unlock Boot loader and flash given twrp in this thread. And then wipe everything except internal storage. Flash omni and gapps.
ianseer said:
Btw... The RGB light features, is it gone? Or we need to port it from the cn rom to get such features?
Click to expand...
Click to collapse
I guess it won't be coming. Its not part of aosp code so. The effects are not gonna be tweaked I guess. Back led perfectly fine.
methuselah said:
Yes first install chinese, then unlock Boot loader and flash given twrp in this thread. And then wipe everything except internal storage. Flash omni and gapps.
I guess it won't be coming. Its not part of aosp code so. The effects are not gonna be tweaked I guess. Back led perfectly fine.
Click to expand...
Click to collapse
thank you very much man ?
methuselah said:
Yes first install chinese, then unlock Boot loader and flash given twrp in this thread. And then wipe everything except internal storage. Flash omni and gapps.
I guess it won't be coming. Its not part of aosp code so. The effects are not gonna be tweaked I guess. Back led perfectly fine.
Click to expand...
Click to collapse
hi please can you confirm the rom is stable ?
if ok i will try ?
alrfa3y-1 said:
hi please can you confirm the rom is stable ?
if ok i will try ?
Click to expand...
Click to collapse
It's better than official in everyway. Latest security patch. What do you need
i flash the rom without gapps its work fine but wiht nano gapps stock in bootloob
i dont know why
---------- Post added at 02:10 PM ---------- Previous post was at 02:09 PM ----------
methuselah said:
It's better than official in everyway. Latest security patch. What do you need
Click to expand...
Click to collapse
now its work with mind the gapps thank you all
i flash the rom without gapps its work fine but wiht nano gapps stock in bootloob
i dont know why
now its work with mind the gapps thank you all
i flash the rom without gapps its work fine but wiht nano gapps stock in bootloob
i dont know why
Click to expand...
Click to collapse
Well I guess you should have grabbed a recovery log right after flashing Omni and gapps before booting to the ROM. (just flash ROM and gapps), go to advanced and I then "advance menu of twrp".
There is this option there to grab recovery log and dmesg". Grab that and post it here. @vache could have looked into it.
deleted
deleted
Reserved #1
Reserved #2
Finally, a LineageOS 19.1 without Gapps pre-installed. Kinda sad that the other los has gms built-in while the other one stopped development. But this one looks promising as it sticks to the original Lineage experience.
Some questions that I would like to have clarification before testing this ROM:
1. ROM is using Aryan Tress right? Means it does also support ANX v204?
2. Signature spoofing present in the ROM?
3. Is OTA available?
4. Will it support erofs and f2fs compression in future build?
5. Is NTFS file format for OTG and SD Card readable? (Some roms can't read my ntfs SD card which I use for backups/ROM changing)
agree with @BigChungus321 , finally a vanilla build.
Can you please tell me the difference between vantom kernel and the default?
Also are you planning to make this official?
Edit: Is this using oss vendor?
Thank you!
Stan m said:
agree with @BigChungus321 , finally a vanilla build.
Can you please tell me the difference between vantom kernel and the default?
Also are you planning to make this official?
Edit: Is this using oss vendor?
Thank you!
Click to expand...
Click to collapse
This is an oss vendor rom since the flashing instruction only says latest miui 13 firmware plus the download size for the file is 1GB+. If it is miui vendor then it should be less.
BigChungus321 said:
This is an oss vendor rom since the flashing instruction only says latest miui 13 firmware plus the download size for the file is 1GB+. If it is miui vendor then it should be less.
Click to expand...
Click to collapse
Okay thanks! Why the miui firmware though? I moved from arrow os 11 to 12 without flashing any firmware or anything else...
BigChungus321 said:
Finally, a LineageOS 19.1 without Gapps pre-installed. Kinda sad that the other los has gms built-in while the other one stopped development. But this one looks promising as it sticks to the original Lineage experience.
Some questions that I would like to have clarification before testing this ROM:
1. ROM is using Aryan Tress right? Means it does also support ANX v204?
2. Signature spoofing present in the ROM?
3. Is OTA available?
4. Will it support erofs and f2fs compression in future build?
5. Is NTFS file format for OTG and SD Card readable? (Some roms can't read my ntfs SD card which I use for backups/ROM changing)
Click to expand...
Click to collapse
to
1. its Aryan Tress yes anx should work i dont use it i use gcam
2. no since this is no linage feature like i said its a clean los build i dont modify anything
3. not yet i can add it if needed
4. erofs no since los trees if they add support for it i can switch to it f2fs is already look at github i only revertet erofs related changes
5. should work but im not really sure dont have sdcard in ntfs
Stan m said:
Okay thanks! Why the miui firmware though? I moved from arrow os 11 to 12 without flashing any firmware or anything else...
Click to expand...
Click to collapse
its oss yes you can flash firmware its not a must its just to keep everything up2date if you already on last firmware its not needed (comming from miui or already flashed from other oss rom)
_JaSoN_ said:
to
1. its Aryan Tress yes anx should work i dont use it i use gcam
2. no since this is no linage feature like i said its a clean los build i dont modify anything
3. not yet i can add it if needed
4. erofs no since los trees if they add support for it i can switch to it f2fs is already look at github i only revertet erofs related changes
5. should work but im not really sure dont have sdcard in ntfs
Click to expand...
Click to collapse
Tysm!
Signature spoof is not really a big problem since there's a workaround for microg without signature spoof. Also thank goodness no erofs, I kinda like having system as r/w. OTA not a problem as well, would be cool though for a TG channel as a way to get notified on updates in the meantime. For anx and ntfs, welp I hope it works since I personally prefer stock camera images and use my SD card to restore backups.
I'm definitely going to give this rom a shot when I get bored of my current ROM.
_JaSoN_ said:
its oss yes you can flash firmware its not a must its just to keep everything up2date if you already on last firmware its not needed (comming from miui or already flashed from other oss rom)
Click to expand...
Click to collapse
Stan m said:
Can you please tell me the difference between vantom kernel and the default?
Also are you planning to make this official?
Click to expand...
Click to collapse
What about this?
Thank you.
Stan m said:
What about this?
Thank you.
Click to expand...
Click to collapse
are you talking about stock miui kernel ? look here https://forum.xda-developers.com/t/...leepy-yuki-delta-and-doraemon-kernel.4398423/ basicly is just upstreamed and added a few features look github or look the linked thread for changes i cant write them all
_JaSoN_ said:
are you talking about stock miui kernel ? look here https://forum.xda-developers.com/t/...leepy-yuki-delta-and-doraemon-kernel.4398423/ basicly is just upstreamed and added a few features look github or look the linked thread for changes i cant write them all
Click to expand...
Click to collapse
So that means this build will never be official? Because i think lineage requires stock kernel
Stan m said:
So that means this build will never be official? Because i think lineage requires stock kernel
Click to expand...
Click to collapse
LineageOS doesn't require the stock kernel. You can't go official with the current device sources (as they are right now anyway) as LineageOS already has a different sm6150-common tree.
Aryannn999 said:
LineageOS doesn't require the stock kernel. You can't go official with the current device sources (as they are right now anyway) as LineageOS already has a different sm6150-common tree.
Click to expand...
Click to collapse
so why not use that?
Anyone using this rom want to share their opinion?
Stan m said:
Anyone using this rom want to share their opinion?
Click to expand...
Click to collapse
I'm using it for about 2 weeks... very good in my opinion, battery friendly no draining, charging fast... the alarm can wakeup phone from power off state...
Hellera said:
I'm using it for about 2 weeks... very good in my opinion, battery friendly no draining, charging fast... the alarm can wakeup phone from power off state...
Click to expand...
Click to collapse
Thanks for the reply! Btw how are you using it since 2 weeks? this was released just 5 days ago
...maybe I was confused because I'm using lineage too on another phone, Oneplus-6T... sorry about this!