[Sounds Mod] MIUI, OxygenOS(OnePlus3), LG G6 Sounds - Lenovo P2 Themes, Apps, and Mods

ABOUT
This flashable zip is to help those who want stock audio(ringtones, alarm etc) of MIUI, OxygenOS, and many more in any ROM.
Flashing Instructions
-Boot into twrp
-Flash the sounds zip from install section in twrp
-Reboot system
Downloads
https://www.androidfilehost.com/?w=files&flid=206364
If you want me to add sounds of 'x' device share me telegram group link of the same device.
Thanks
Version Information
Status: Stable
Last edited: 13/8/2017
Created 11/8/2017

Added V2.0 & Google Pixel's Stock Sounds (Added a command for permissions)
Added Sony Xperia's Stock Sounds (12/08/17)
Added oxygen os, lg g6 stock sounds.(11/08/17)

Special thanks to @FireLord for always answering my questions and help me teaching me how to create twrp flashable zips

Thanks

Related

[UNIVERSAL]VoLTE Patch v2 for All Android N Roms [Updated: 2.1.17]

What is this?
This is a patch for Kenzo by which you will get volte on any nougat rom (non volte) out there.
Disclaimer:
If you want to add this patch to your rom, please give proper credits and link this thread too.
If you like this, press that thanx button. If you use this, consider donation. :victory:
Requirement:
Redmi note 3 on any rom
Unlocked and with TWRP recovery
VoLTE v3 patch 25-01-17
Instructions:
Clean flash
1. Download any non volte rom
2. Download v3 patch
3. Flash the rom according to instructions provided on rom thread
4. Flash firmware 15-11-16 Credits Newer firmware? Try and report. :good:
5. In the end flash v3 patch
6. Reboot.
Dirty Flash OTA
Flash your rom's ota as you do(without wiping system), no need to flash patch again. It will be auto applied after every dirty flash.
FAQ:
1. VoLTE was not working for 'x' reason on volte enabled rom, will this fix it?
A- It may.
2. Does volte works on second sim?
A- Not tested but should work.
3. Is there or going to be any patch for Marshmallow based roms?
A- Yes. Go here
4. Does this fix 'x' issue i faced on a volte enabled rom?
A- No!
5. Everything above said is checked, still no VoLTE?
A- Check v2 guide and also post #3.
Donations:
Thanx for your kind donations, it helps.
Send me a pm if you have donated, if you want to join telegram group for close testing and support. :highfive:
NVDX11, 99xxxx3869, 97xxxx1652, 94xxxx8709 (AmolAmrit), 89xxxx6581 (hemant_jeengar), 77xxxx8388, 88xxxx9810, 90xxxx4024, 86xxxx0406, 89xxxx8858, 88xxxx9810, asrupesh, 73xxxx6596, MakDroid, BabyTedhu, 95xxxx7623 (vk82119), 81xxxx4723, 73xxxx3906, 88xxxx0101, Pancha5
Credits:
TheStrix
abhishek987
Santhosh M
Telegram Channel for faster ETA's, Changlog: Channel
XDA:DevDB Information
VoLTE Patch Nougat, Tool/Utility for the Xiaomi Redmi Note 3
Contributors
Sudeep Duhoon
Version Information
Status: Stable
Current Stable Version: 3
Stable Release Date: 2016-12-31
Created 2016-11-29
Last Updated 2017-01-25
Changelog and v1 beta patch (old)
Change-log:
25-01-17 v3 released Might be last
Based on TheStrix Commits
13-01-17
Updated with newer files
31-12-16 v2 released
Only 1 zip needed now instead of 2
Universal for nougat
OTA support
64k sim support, no force close
Auto patch, no manual build.prop editing
Reduced size a lot
Don't touce framework-res.apk
Old v2 guide
What is this?
This is a patch for Kenzo by which you will get volte on any nougat rom (non volte) out there.
Disclaimer:
If you want to add this patch to your rom, please give proper credits and link this thread too.
If you like this, press that thanx button. If you use this, consider donation. :victory:
Requirement:
Redmi note 3 on any nougat volte enabled rom (read FAQ #5 too)
Unlocked and with TWRP recovery
VoLTE v2 patch 31-12-16
VoLTE v2 patch 13-01-17
Instructions:
Clean flash
1. Download any non volte rom
2. Download v2 patch
3. Flash the rom according to instructions provided on rom thread
4. In the end flash v2 patch
5. Reboot.
Dirty Flash OTA
Flash your rom's ota as you do(without wiping system), no need to flash patch again. It will be auto applied after every dirty flash.
FAQ:
1. VoLTE was not working for 'x' reason on volte enabled rom, will this fix it?
A- No!
2. Does volte works on second sim?
A- Not tested but should work.
3. Is there or going to be any patch for Marshmallow based roms?
A- Yes. Go here
4. Does this fix 'x' issue i faced on a volte enabled rom?
A- No!
5. Everything above said is checked, still no VoLTE?
A- Check post #3.
Donations:
Thanx for your kind donations, it helps.
Send me a pm if you have donated, if you want to join telegram group for close testing and support. :highfive:
NVDX11, 99xxxx3869, 97xxxx1652, 94xxxx8709 (AmolAmrit), 89xxxx6581 (hemant_jeengar), 77xxxx8388, 88xxxx9810, 90xxxx4024, 86xxxx0406, 89xxxx8858, 88xxxx9810, asrupesh, 73xxxx6596, MakDroid, BabyTedhu, 95xxxx7623 (vk82119), 81xxxx4723, 73xxxx3906, 88xxxx0101, Pancha5
Credits:
abhishek987
TheStrix
Santhosh M
Telegram Channel for faster ETA's, Changlog: Channel
Old v1 guide
What is VoLTE​
Requirement:
Redmi note 3 on Working VoLTE Nougat rom
Unlocked and with TWRP recovery
Instructions:
Auto (Limited):
1. Download Rom from respective thread and follow the instructions given there to flash it.
2. Download the "volte.zip" and "volte_ROMNAME_BUILDDATE.zip" from here. (check the rom name and build date correctly before flashing)
3. Flash "volte_ROMNAME_BUILDDATE.zip"
4. Flash "volte.zip"
5. Wipe cache and dalvik.
6. Reboot. Done!
Notes:
(i) Volte.zip is common for all roms, other rom specific zips will be based on rom name and their build date. This is done to reduce the bandwidth required to download patches.
(ii) If volte not working then download abhishek's firmware from here and flash it. Thanx to xenolith190 for pointing this out.
Manually (No limits):
Additional requirement: A PC with windows (can be done on android too but not included in this tutorial)
1. Download and flash the rom according to the instruction provided on rom's thread.
2. Download apktool and extract/setup in your pc.
3. Use File explorer inTWRP and copy /system/framework/framework-res.apk to /sdcard
4. Connect phone to pc and copy/move framework-res.apk to apktool directory.
5. Open cmd and cd to your apktool dir. And type following commands:
Code:
apktool if framework-res.apk
apktool d framework-res.apk
6. Open to /res/values/bool.xml in text editor (i use notepad++) and change these values to true
Code:
<bool name="config_device_volte_available">true</bool>
<bool name="config_carrier_volte_available">true</bool>
7. Type
Code:
apktool b framework-res
to build apk back.
8. Open new framework-res.apk from apktool/framework-res/dist folder and old framework-res.apk from apktool folder using a zip software like winrar.
9. Drag and copy AndroidManifest.xml and META-INF from old to new apk.
10. Same way drag this new apk to any of the rom specific zip available on this thread and flash as instructed.
NOTES: You need to edit bool.xml in framework-res.apk to enable volte option in rom. Rest of the required libs and files are present in volte.zip and is common for all roms. This tutorial may become more detailed, it completely depends on free time i get. I will not answer any question regarding this in personal messages. If you edit any rom's framework-res.apk please mention me and add that in this thread and i will add you to the op as contributor so you can maintain that rom's future builds too.
Thank you for understanding.
Downloads: HERE
From now on patches will be added here (XDA ERROR:Missing or incorrect project information.)
1. [UNOFFICIAL] ResurrectionRemix 5.8.0 [OTA/OMS] - 20-12-2016
2. [UNOFFICIAL] ResurrectionRemix CK FPC 5.8.0 [OTA/OMS] - 23-12-2016 NOT WORKING (send me framework-res.apk)
3. Mokee 201612230813-NIGHTLY
4. [UNOFFICIAL] ResurrectionRemix 5.8.0 [OTA/OMS] - 23-12-2016
5. [UNOFFICIAL] ResurrectionRemix 5.8.0 [OTA/OMS] - 26-12-2016
Community built patches:
Patch for cosmic os 1st december 2016 build by xenolith190
Patch for BeanStalk 7.1.1 by contactwajeeh
Patch for 08th December Nightly AICP by gulshanstrider
Patch for 08th December nightly AICP by contactwajeeh
Patch for CM Official Nightly's by contactwajeeh
Patch for AOKP 9/12 Build by NVDX11
Patch for CleanRom 9th december 2016 build by xenolith190
Patch for official cm 14.1 nightly 10.12.16 by sarveshrulz
Patch for Cr droid 1.5 by vk82119
Patch for aicp 11th dec build by Sumit Samanta
Patch for aicp 12th dec build by Sumit Samanta
Patch for official cm 14.1 13-12-16 build by ashokumar257
Patch for official cm 14.1 15-12-16 build by ashokumar257
Patch for AICP 19th December build by gulshanstrider
Patch for NucleaRom build by sohail0098
Done:
CM
crDroid 7.1
XenonHD
CM14.1 (TheStrix)
Lineage os by @Infinity
AOSP/CAF
CleanRom
AOSPExtended
halogenOS 7.0
Aoscp 3.1.2
CitrusCAF-kenzo-2.2-LemonDrop-OFFICIAL-20161129 Supports Volte now
AICP Build date 29th October Thanx to skandhan for sending the file
AICP Build date 11th November Thanx to fosterqaz11 for sending the file
Cosmic-OS v1.1
ZephyrOS-7.0-20161130-Viersion-V6.1
Slim7
Mokee 201612110653-NIGHTLY
Mokee 201612230813-NIGHTLY
All requested roms done, for more, please request. If you can link of the thread of requested rom, it will be great.
To Do:
Send rom's framework-res.apk in PM, google drive preferred.
Testing:
NOTE:These are test patches and unlikely to work. You might get a bootloop.
Official CM13 Patch Download Working chances 60%
Resurrection Remix 5.7.4 Patch Download Working chances 5%
FAQ:
1. VoLTE was not working for 'x' reason on volte enabled rom, will this fix it?
A- No!
2. Does volte works on second sim?
A- Not tested, tested with jio sim in first slot, works fine.
3. Is there or going to be any patch for Marshmallow based roms?
A- Test Patches are added, if anyone wants to try.
4. Marshmallow patches are not working?
A- Send me logcat.
5. Does this fix 'x' issue i faced on a volte enabled rom?
A- No!
6. I got com.android.phone force close what should i do?
A- Clean flash the Rom or wait for the fix.
7. Everything above said is checked, still no VoLTE?
A- Check if you have set correct APN for particular sim card and if still VoLTE is not working send me logs.
8. No Audio in calls.
A- Use any root explorer and edit build.prop to change ro.qc.sdk.audio.fluencetype=fluence to ro.qc.sdk.audio.fluencetype=none. Save, set correct permissions and reboot.
9. Got Bootloop on CM Nightly or any other newer rom
A- Decompiling and recompiling alone, without making any changes to framework-res.apk in these roms are causing bootloops, must be issue with apktool/rom. Can't do anything.
XDA:DevDB Information
N Roms VoLTE Patches, Tool/Utility for the Xiaomi Redmi Note 3
Contributors
Sudeep Duhoon
Santhosh M
TheStrix
Akhil Narang
gulshanstrider
contactwajeeh
xenolith190
NVDX11
sarveshrulz
vk82119
Sumit Samanta
Version Information
Status: Beta
Created 2016-11-29
Last Updated 2016-12-30
How to get VoLTE for the first time
Things needed: (things with * is needed for unofficially unlocked device)
1. Redmi note 3 on any rom
2. TWRP recovery
3. A PC with working internet connection
4. USB Cable
5. Mi Unlocker tool (google)
6. Mi Flash tools (google)
7. Any miui fastboot rom, build previous to 6.11.15 build (i use 6.11.3)
8. CM VoLTE by abhishek987
*emmc_aboot (which you used to unlock officially)
*boot.img_patcher.zip
*lazyflasher.zip
Instruction: (steps with * is needed for unofficially unlocked device)
1. Extract miui rom and replace TWRP with recovery.img. *replace emmc_aboot too if unofficially unlocked
2. Reboot device to fastboot and connect it to pc
3. Install/open Mi flash tools and browse to extracted rom's dir
4. Click Flash (your internal storage my get wipes)
5. Monitor the process and when it is near to end keep volume down button pressed
6. Phone will restart to fastboot and use Mi unlocker tool to unlock your bootloader as it may have been relocked *use fastboot command fastboot oem device-info to check status and if locked then use fastboot oem unlock-go to unlock bootloader.
7. Press and hold volume up+power to reboot to twrp
8. Use file manager to check if data is wiped or not, if not the wipe data (not internal sd), wipe cache too *flash lazyflashed and bootimg patcher
9. Reboot and complete initial setup
10. Once you get VoLTE symbol on status bar try to call someone and then reboot to recovery
11. Backup EFS and adspso
12. Flash CM VoLTE according to details provided on thread (skip any custom kernel, gapps, etc)
13. Reboot to check VoLTE working, if not reboot to recovery and restore EFS
14. Once volte gets working, follow post #1 to flash any non volte rom.
is there a link?
42o247 said:
is there a link?
Click to expand...
Click to collapse
seems NO :silly:
Reallyyyy
We can make volte work on non volte roms...!!!!....thats cooolllll
wow you both were fast. still editing. lol
ps. adding link first, will edit later
great...volte for every rom...
Haha... Bro i am waiting add link fast
Link link link.....i cant waitttt
Link plz....
kiran G. said:
Reallyyyy
We can make volte work on non volte roms...!!!!....thats cooolllll
Click to expand...
Click to collapse
BRoy_98 said:
seems NO :silly:
Click to expand...
Click to collapse
42o247 said:
is there a link?
Click to expand...
Click to collapse
silentkiller88 said:
Haha... Bro i am waiting add link fast
Click to expand...
Click to collapse
kiran G. said:
Link link link.....i cant waitttt
Click to expand...
Click to collapse
megatron0110 said:
Link plz....
Click to expand...
Click to collapse
link up for crDroid.
Sudeep Duhoon said:
is there a link?
Haha... Bro i am waiting add link fast
link up for crDroid.
Click to expand...
Click to collapse
For resurrectionRemix?
megatron0110 said:
For resurrectionRemix?
Click to expand...
Click to collapse
it already has volte
Y is it named as crdroid...???....does this work only on crdroid...???
kiran G. said:
Y is it named as crdroid...???....does this work only on crdroid...???
Click to expand...
Click to collapse
yes. only for crDroid. I am uploading XenonHD and CM14.1 fix as well. Slow connection, i need some time.
Sudeep Duhoon said:
yes. only for crDroid. I am uploading XenonHD and CM14.1 fix as well. Slow connection, i need some time.
Click to expand...
Click to collapse
Any screenshot of crdroid ROM that volte is working ?
A Request to OP. Please make a patch for any 7.0 based Rom with OMS commits so that we can enjoy substratum also.
There are many cm14.1 Roms out there but none of them has substratum support
Please make a patch for a ROM with OMS commits
only for crdroid rom?
Can I use this in RR 7.4?

[TWRP] Stock 9.0 Stable [V10.0.14.0][October 2019]

Welcome to the new thread of twrp flashable stock Android One for Mi A1
There will be only stable TWRP flashable builds of stock with no modifications.
All these builds of mine contain everything which a fastboot ROM does, so it's a complete replacement.
How to install
1. Reboot to TWRP (CosmicDan TWRP is recommended)
2. Wipe system, data, dalvik and cache. (if coming from a custom rom) (you may skip if coming from stock)
3. Install the ROM file.
4. Reflash TWRP installer (if you want to have TWRP installed in your phone later).
5. Install Magisk (if you want to have root).
6. Reboot to system.
Additional Notes/Credits
Original credits go to Xiaomi and Google.
Downloads
Latest:
Stock 9.0 [V10.0.14.0] TWRP - October 2019
Old Downloads:
Stock 8.1.0 [V9.6.7.0.ODHMIFE][October 2018 Security Patch]
Stock 8.1.0 [V9.6.8.0.ODHMIFE][November 2018 Security Patch]
Stock Pie Beta [V10.0.2.0] TWRP Zip
Stock Pie Stable [V10.0.3.0] TWRP Zip
​
XDA:DevDB Information
Stock Android One, ROM for the Xiaomi Mi A1
Contributors
talayy
ROM OS Version: 9.0 Pie
ROM Firmware Required: TWRP 3.2.X.X
Version Information
Status: Stable
Current Stable Version: 10.0.14.0
Created 2018-10-20
Last Updated 2019-10-29
Nice
Keep this up to date ?
Great job! Do continue to update this thread!
talayy said:
Welcome to the new thread of twrp flashable Stock 8.1.0.​
There will be only stable builds of stock 8.1.0 with no modifications.​
How to install​
1. Reboot to TWRP
2. Wipe system, data, dalvik and cache. (if coming from a custom rom) (you may skip if coming from stock)
3. Install the ROM.
4. Reflash TWRP installer (if you want to have TWRP installed in your phone later).
5. Install Magisk 17.x (if you want to have root).
6. Reboot to system.​
Additional Notes/Credits​
Special thanks to Tadi for providing me payload OTA link. Moreover, additional credits go to Xiaomi and Google.​
Downloads​
Stock 8.1.0 [V9.6.7.0.ODHMIFE][October Patch]​
XDA:DevDB Information
Stock 8.1.0, ROM for the Xiaomi Mi A1
Contributors
talayy
ROM OS Version: 8.x Oreo
ROM Firmware Required: TWRP 3.2.x.x
Version Information
Status: Stable
Current Stable Version: V9.6.7.0.ODHMIFE
Created 2018-10-20
Last Updated 2018-10-20
Click to expand...
Click to collapse
Hey, can you share how you get the full source? like from MI official site or from Google directly? Do you mind sharing how you able to find the direct link to the full stock ROM of October security patch for Xiaomi A1 global?
I can't find it in official MI and I like to "Take bug report" to locate the OTA link that it tries to download and manually unpack the payload.bin, but Magisk seems can't patch the boot.img
myself379 said:
Hey, can you share how you get the full source? like from MI official site or from Google directly? Do you mind sharing how you able to find the direct link to the full stock ROM of October security patch for Xiaomi A1 global?
I can't find it in official MI and I like to "Take bug report" to locate the OTA link that it tries to download and manually unpack the payload.bin, but Magisk seems can't patch the boot.img
Click to expand...
Click to collapse
I just had payload file from official google OTAs which I decompiled using python codes and made a twrp flashable zip that just works well and yeah, I'll keep it up to date. You all will get TWRP flashable stock within a day of OTA release but only for stable versions.
talayy said:
I just had payload file from official google OTAs which I decompiled using python codes and made a twrp flashable zip that just works well and yeah, I'll keep it up to date. You all will get TWRP flashable stock within a day of OTA release but only for stable versions.
Click to expand...
Click to collapse
How did you get this files?
zurik said:
How did you get this files?
Click to expand...
Click to collapse
Search it up on Google, everything's there ?
I soo wanted to switch to stock....
And here u aree
---------- Post added at 04:26 PM ---------- Previous post was at 04:22 PM ----------
Something is wrong with the link not working
talayy said:
I just had payload file from official google OTAs which I decompiled using python codes and made a twrp flashable zip that just works well and yeah, I'll keep it up to date. You all will get TWRP flashable stock within a day of OTA release but only for stable versions.
Click to expand...
Click to collapse
I do get the payload.bin and able to extract the boot.img, but how you recompile into a full version? the payload.bin from Septemeber patch to October patch is 200 MB++ while the TWRP flashable stock you provided is 1.1GB, how you recompile it?
myself379 said:
I do get the payload.bin and able to extract the boot.img, but how you recompile into a full version? the payload.bin from Septemeber patch to October patch is 200 MB++ while the TWRP flashable stock you provided is 1.1GB, how you recompile it?
Click to expand...
Click to collapse
Payload bin from September to October is different from payload bin of October OTA as a full package. Also, I used kitchen + wrote updater script to flash it in A/B partition device (A1 in this case) using TWRP.
Too many people have downloaded the filee?
So you cannot access the file
Showing this on download page!!!
Yeah can you rehost this with another download link?
Downloading now!! thanks for this one bro. Plz always keep up-to-date this thread. And can u tell me which custom kernel should i use for better battery life with stock rom? any idea?
Please, uploud to another serwer - thanks!
Hey guys, I'm having major exams this week so I am not sure if I have any time to reupload. If someone has it downloaded, please mirror it for time being and I'll add it to OP.
What should i do to increase charging speed as charging speed on stock is pretty slow
Arnav1104 said:
What should i do to increase charging speed as charging speed on stock is pretty slow
Click to expand...
Click to collapse
It is fine for me. Same as in other roms. On a side note, if you want more than official then flash a custom kernel e.g moun/franco and manually increase it.
talayy said:
It is fine for me. Same as in other roms. On a side note, if you want more than official then flash a custom kernel e.g moun/franco and manually increase it.
Click to expand...
Click to collapse
Yaa i mean to say which custom kernel i should flash on stock rom to increase charging speed
Well, I'm able to download today. y'all should try again If not download from Mirror (MEGA)
https://mega.nz/#!kQoDEaoI!FjNk4bT0cVLq5Fj8e5IyPa0gkJM4SJfFqWyhN_J29TE

{ROM}[Updated] J5PRO All variants Except Y {Toaster Rom} {TW8.1}

Hello guys i want to share some of my work for the j5 pro this rom is basen in J530GUUB3BRK1 latest firmware with november security patch
Features:
added some features
updated some apps to pie
more performance
kernel modded
other goodies
Installation:
Must use TWRP 3.2 HERE
wipe all partitions
install
and enjoy
Download:
https://androidfilehost.com/?fid=11410963190603862913
Updated Rom changelog:
added lz4 compression to kernel for better ram and zram management
removed secure flag and signature
based on TPA csc
added ultra data saving
added live focus to main camera and some camera modes
updated some pie and stock apps to latest version
added auto theme ( by @eNVy )
code cleaning
rooted with magisk v18
some others goodies
stuff than i dont remember
:silly:
Download updated rom:
Updated Toaster Rom
Toaster Rom V3:
Added ar emojis
New camera modes
Updated libraries ported from M10
Kernel optimized
Pie apps updated
Much more to discover
Download:
Toaster Rom V3
After the rom boots, restart the device to avoid lags
ROM OS Version: 8.1.x Oreo
ROM Kernel: Linux 3.18.xx
ROM Firmware Required: Stock Android 8.1
Status: Stable
Created 30-11-2018
Last Updated 21-02-2019
Ask me if you want to share my work in your blog or webpage
Hit Thanks if you like my work
Telegram support:Telegram Group
Special thanks to:
@corsicanu for ported pie apps
@LeeXDA18 for keep going the pie apps
anyone else involved in that proyect
material design is se 10?
tutibreaker said:
Hello guys i want to share some of my work for the j5 pro this rom is basen in J530GUUB3BRK1 latest firmware with november security patch
Features:
added some features
updated some apps to pie
more performance
kernel modded
other goodies
Installation:
Must use TWRP 3.2 HERE
wipe all partitions
install
and enjoy
Download:
https://androidfilehost.com/?fid=11410963190603862913
ROM OS Version: 8.1.x Oreo
ROM Kernel: Linux 3.18.xx
ROM Firmware Required: Stock Android 8.1
Status: Stable
Created 30-11-2018
Last Updated 30-11-2018
Ask me if you want to share my work in your blog or webpage
Hit Thanks if you like my work
Telegram support:Telegram Group
Special thanks to:
@corsicanu for ported pie apps
@LeeXDA18 for keep going the pie apps
anyone else involved in that proyect
Click to expand...
Click to collapse
weather widget doesn't work ,is there something i can do to fix it ?
borica said:
weather widget doesn't work ,is there something i can do to fix it ?
Click to expand...
Click to collapse
The widget must be set manually to your location and please dont quote the whole post
Is this also working on 530F ?
And if so, do I need to have stock Oreo or can it also be flashed over Lineage OS 15?
Mickeyvdb said:
Is this also working on 530F ?
And if so, do I need to have stock Oreo or can it also be flashed over Lineage OS 15?
Click to expand...
Click to collapse
confirmed working fine on f
Ngadhnjim said:
confirmed working fine on f
Click to expand...
Click to collapse
thanks for the info
Y para el j5 prime? para cuando?
Hello
Very good rom nice work!
But are you working on a update?
Pleas update
Thank you for the great rom!
Downloading...
Does this ROM have random reboots?
Wouldn't want that when gaming.
And also how good is it in graphic intense games like PUBG mobile?
Hello,
I've installed the ROM, no problems.
But in the main post, you mentioned the root with Magisk, but root checker says that only Superuser app is installed (Magisk Manager 6.0.0).No Superuser Binary files, and no Root user account.
Also in Developer options, there no option for OEM Unlock.
How can I get full root with this rom?
gjvv1975 said:
Hello,
I've installed the ROM, no problems.
But in the main post, you mentioned the root with Magisk, but root checker says that only Superuser app is installed (Magisk Manager 6.0.0).No Superuser Binary files, and no Root user account.
Also in Developer options, there no option for OEM Unlock.
How can I get full root with this rom?
Click to expand...
Click to collapse
just flash magisk
Hello,
I found it allready. The Magisk Manager was version 6.0.1, and could not install the latest Magisk.
I've rmoved completely the manager, and install the latest Magisk Manager.
Then flashed latest Magisk, and everthing was just fine.
Great rom, works fine and stable.
Nice to have a data toggle in the power menu :good:
How about a 9.0 Pie version of this rom?

[ROM][PORT][9.0.0] Xperia 5 - 55.0.A.7.115 [11.10.19]

Xperia 5 for OnePlus 6T!
Another ROM made by Jay's Dev Team! Huge Thanks to MounirHero for maintaining it! No more abandoned support, more frequent updates and tested builds! :victory:
This thread will be mostly updated by MounirHero (Matrix).
Features:
Stock Xperia 5 Firmware
Debloated
Automated Flasher
Custom Kernel Support
Full GCam 7 Support
Decrypted
Performance tweaks
Dolby Atmos!
Xperia AOD!
Xperia Loops!
Game Enhancer!
3D Creator with Face Animation!
Side Sense!
What works:
Almost everything, check bugs!
What doesn't work / Bugs:
Framework issues (same as MIUI)
Brightness is same as in Pixel port so use JRC app for 100%.
Firmware without FOD Support
How to Install:
Note: Backup Your nudes before flashing the rom!.
Boot TWRP
Flash 9.0.7 OTA
Reboot to fastboot menu
Run flasher.bat
Enjoy!
You can root after going through SetupWizard!
Check screenshots in second post!
Download:
Xperia 5 for OnePlus6T LatestBuild​
Warning! DO NOT flash Xperia OTA's! They may brick Your phone! If You end up flashing one anyway, just use EDL mode or fastboot to go back to stock firmware.
If You have any other problems, just ask here on XDA or for the fastest support PM me or ask someone in my group on Telegram
Join our group!
Jay's Dev Team:
Jay - Main Developer - Donate to Jay
MounirHero - OnePlus 6T Maintainer & Tester - Donate to Mounir
Credits:
MounirHero for maintaining and testing
ProtoDeVNan0 for base OP6 Port
erfanoabdi for vendor patcher idea.
FunkWizard/OnePlus for latest firmwares!
OnePlus for creating OP6!
My friend Dylan for always supporting me
If I forgot anyone, just PM me on Telegram!
​
XDA:DevDB Information
[ROM][PORT][9.0.0] Xperia 5 [11.10.19], ROM for the OnePlus 6T
Contributors
ProtoDeVNan0, MounirHero
Source Code: https://github.com/OnePlusOSS/android_kernel_oneplus_sdm845
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: OxygenOS 9.0.7
Based On: Xperia
Version Information
Status: Stable
Created 2019-10-11
Last Updated 2019-10-11
After rebooting device on and went to blank screen waited for long time no boot is there any other steps
I flashed 9.0.7 from twrp and flashed twrp
Again flashed 9.0.7 from twrp and rebooted to fastboot
Finally flashed .bat file and rebooted the device stuck at blank screen do I did any thing wrong
Screenshots?
The windows flash_all.bat is labeled the miui port and tries to flash rom.img but there is no rom.img in the Xperia rar. Only system.img. I tried replacing rom I'm with system.img but still no luck booting.
Buddhaog said:
The windows flash_all.bat is labeled the miui port and tries to flash rom.img but there is no rom.img in the Xperia rar. Only system.img. I tried replacing rom I'm with system.img but still no luck booting.
Click to expand...
Click to collapse
Don't forget to flash custom kernel and magisk after that
ZIDAN16 said:
Screenshots?
Click to expand...
Click to collapse
+1

[PORT]Oxygen OS[LAVENDER][STABLE]

The stablest OOS Pie port ever for lavender
9.0.9 Port from Oneplus 6
Steps:
*Wipe system, dalvik, cache, data, vendor
*Flash the ROM zip
*Format Data (its different from wipe)
*Reboot
Notes:
*If the screen turns black after the setup screen, force reboot using power button
*if you want to flash any kernel(use AOSP kernels), flash magisk after flashing the kernel
Everything working including VOLTE
For any questions, join lavendergsi on telegram
Known Bugs:
Almost none other than
*Stock Face Unlock(You can use Google trusted facial recognition from Smart Lock)
Rom:
Check reserved
Credits:
guzram(for porting this ROM to lavender)
erfanoabdi(for GSI)
XDA:DevDB Information
[PORT] Oxygen OS [LAVENDER][STABLE], ROM for the Xiaomi Redmi Note 7
Contributors
wow suspect, erfanoabdi, guzram
Source Code: https://github.com/erfanoabdi/ErfanGSIs
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: Unlocked Bootloader, Custom recovery
Based On: Oxygen OS
Version Information
Status: Stable
Current Stable Version: 9.0.9
Created 2019-11-17
Last Updated 2019-11-17
Reserved
Rom :-
MOD EDIT: DL link removed
Reserved
Is selinux permissive?
no need to flash gapps?
Nice release!
I'm testing and get some problem, display seems to be always on night mode, even if I try to change that in settings...
Thanks for u hard work!
Guzram allowed you to release his work?
guzado said:
Nice release!
I'm testing and get some problem, display seems to be always on night mode, even if I try to change that in settings...
Thanks for u hard work!
Click to expand...
Click to collapse
I do not own any rights. The dev is not active for a while. I will add his exact xda username on credits when he is back on telegram. Thank him!
Shinsen26 said:
Guzram allowed you to release his work?
Click to expand...
Click to collapse
Nope. The dev is offline for a while. I will ask his permission when he comes back online. If he doesn't allow, I'll obviously close the thread. How can people in XDA miss this amazing port.
Thread closed until permissions from the original dev is granted
OP: Please check your PM-Inbox for more informtion.
PM me if you want to have it reopened.
strongst
Forum Moderator

Categories

Resources