P10 Plus stuck in fastboot with black screen - Huawei P10 Questions & Answers

Hi,
I just tried to do a OTA today, and my p10 try to reboot and never came back. Now the screen is completely off. When I plugged in my computer it can be detected in fastboot mode. I can unlock bootloader with the code and flash recovery. But I cannot reboot into recovery or anything as the screen remains complete off. I bought it in China and rebranded to Asia pacific. Anything I can to do unbrick it?
Thanks.

Fixed.

Hi,
How did you solve it?
Thanks

I have the same issue.
Please Can you tell us How did you solve it?

Any one found a solution? have same issue.
Phone connected to the laptop reacts and fastboot devices shows the device but nothing else. Black screen like phone would be off

I have the same problem. phone freeze on black screen. Several reboots necessary to make it work again. I mean up to 10 reboots. It happened already several times. After it is back it does work for some days without problems. But obviously, it comes again and again.
If there is any solution to that would be really great.

wrong rebranding...do rebranding again

some solution ?
:crying: some solution my huawei p10 plus is dead

Need help
hi j have the same proble can you maybe help me how to bring my phone back to live .

I also have the same problem but with P10 only, after updating with hisuite, it wont turn on and it only detects as fastboot, also my bootloader is locked.

Related

[Q] Phone not booting

Hi all,
I use CM12 from MacLaw in combination with TWRP 2.8.1.0 recovery for about 3 weeks now.
Yesterday the phone didn't respond properly, was very very slow and I basically couldn't use the phone. It felt like the CPU was at 100% all the time, so unlocking the phone, calling and so was nearly impossible. A reboot (battery removal) didn't solve it, also the pin code for the sim card came after a few minutes while usually this will come right after starting.
So eventually I did a factory reset from the menu as I did on other occasions just to get rid of this kind of problems.
Well, right after the Samsung s3 mini logo I get the TWRP logo and it will be stuck in there, I see it blinking every few seconds and that's it. When I connect the phone to USB I hear it connecting-disconnecting every few seconds (bing-bong, bong-bing sound).
After a while I flashed TWRP using Odin again, this didn't give any problem but it will still hang in this TWRP loop.
I found some references to this problem but no real solutions. Someone suggested to use ADB but I don't know how to do that, nor could I find a suitable guide on this.
Can anyone help me? Or is it bricked somehow?? I suspect not, download mode is still working.
Thanks for any help!

honor 3c (h30-u10) stuck at boot logo (restarting at boot logo)

Hello guys ,
out of the blue my phone just stuck at boot logo and just keeps restarting .
it either stays at boot screen or nothing at all.
power+vol up(down) isnt working as well
can anyone please help me resolve this
i went to a service center and they said it is a hardware issue and parts for this model are not available any more so they cant do anything this about it.
TIA
regards
umerashraf said:
Hello guys ,
out of the blue my phone just stuck at boot logo and just keeps restarting .
it either stays at boot screen or nothing at all.
power+vol up(down) isnt working as well
can anyone please help me resolve this
i went to a service center and they said it is a hardware issue and parts for this model are not available any more so they cant do anything this about it.
TIA
regards
Click to expand...
Click to collapse
Do adb recognize your phone?!
Fixed it?
flash stock rom.
If your phone is showing you BOOT (huawei/honor logo or image) then this not hardware issue. It can occur if you have flashed a custom recovery while its bootloader is locked or Chinese local update available on carbon tesla. Code [email protected] has given very precise details and solution about it. Solution= Download Sp flash tools. Download drivers. Download signed and unsigned official roms B108 or 115. and start experimenting.
what I have done : I flashed Chinese version Rom and then Same issue occurred sent it to claim my warranty. after sometime I did the same mistake but I started searching for this issue and found a complete huawei honor 3c guide on xda. Do not believe shop owner they can be mistaken or experienced.
Fixed
My huawei honor 3c was stuck on logo. I copied dload file to mmc and through stock recovery flashed it. Phone is now ok.

Phone memory seems to be read only

As I said in the title. The phone's memory seems to be read only.
I can access the fastboot mode of the phone and issue commands like flashing the recovery but it doesn't seem to update anything on the phone even though I get the "OKAY" message.
My phone is unlocked and until last night I was running CyanogenMod on it just fine. But now I can't flash a new recovery or access it. I have TWRP installed but everytime I try to boot into recovery the phone gets stuck on the logo screen and flashes every couple of seconds.
If I try to start my phone normally I get the cyanogenmod logo on start up (even after flashing stock) and the phone never actually boots up.
Anyone had the same problem before? If you need more details I'll reply ASAP.
My phone is the retail European XT1068 Dual Sim. Thank you in advance for any help.
Same issue here (I'm MrPowerGamerBR on Reddit), the more I read about trying to fix this issue, the more I start thinking "this phone is dead, move on..."
There isn't no fix for this, the only way to fix is replacing the logic board.

ROG phone 2 Bootloop

Hello guys,
My phone suddenly reboots itself while browsing on FB.
After it reboots it freezes on the RoG phone 2 Logo.
I tried to force reboot it by pressing Volume up + Power buttons. I tried all the options but it still go backs to the Black screen.
I tried reflashing it to the default A9 firmware. Still the problem persist. :crying:
Anyone have the same problem or how to fix this issue?
Thanks in advance
A factory reset would do, maybe you configured some of the settings wrongly.
First of all the phone was rooted and bootloader is unlocked this is the information you guys should mention in posts while need help if you were rooted i would highly recommend factory rest and reflashing rom but keeping the bootloader unlocked in case something went wrong the unlocked bootloader would be helpful.

Need help ROG 2 bricked?

Hi guys, i need help with my ROG Phone II CN ver
the other day, i was downloading stuff from PlayStore, just regular app, and suddenly it shuts off.
Then i turn in on again and it stuck on the ROG logo forever.
I force shutdown and try again, still stuck.
Then i boot into fastboot, and try to access the recovery mode, no avail, when i choose recovery mode, its also stuck in ROG logo
Now, i already try flashing raw both CN and WW and doesnt work, the result is FAILED. I've downloaded bunch of raw firmware and seems like AFT can't flash my phone.
Next i try the EDL method using the XiaomiFlash, it works and give a green success sign, BUT when i turn on the phone, STILL STUCK ON LOGO
I've try using another PC and still cant get it work.
Now i dont know what to to anymore. Can anyone help before i finally have to get this to the service center.
Is the NAND (UFS) broken? or anything else i can do?
FYI the phone still "works" like charging and even detecting normal/quick charge.
THanks guys

Categories

Resources