Related
Is anyone else having an issue where your device will be hooked up to a wifi network, will still indicate you're connected but no data will sync? I email myself and nothing happens. Happens with FB, Email, Gmail, and Voice Controls don't work.
ShamanicEnzan said:
Is anyone else having an issue where your device will be hooked up to a wifi network, will still indicate you're connected but no data will sync? I email myself and nothing happens. Happens with FB, Email, Gmail, and Voice Controls don't work.
Click to expand...
Click to collapse
I have that issue with my gNex and my wife's DNA on our home network. I don't think it is necessarily this phone, but I am not convinced (yet) that it is my router, either...
TheKaz said:
I have that issue with my gNex and my wife's DNA on our home network. I don't think it is necessarily this phone, but I am not convinced (yet) that it is my router, either...
Click to expand...
Click to collapse
It comes and goes, it looks almost app specific. I say Hello Google Now, and it seems to lock up on recognition or says it can't connect to google....but I'm able to browse the internet.
Yeah I've been having a ton of WiFi issues with this phone.
Slusho said:
Yeah I've been having a ton of WiFi issues with this phone.
Click to expand...
Click to collapse
I called Moto and after dealing with their terrible level 1 support I got the following:
HERE ARE THE INSTRUCTIONS FOR DOING THE WIPE CACHE PARTITION:
This will remove any temporary files that may be causing the problem, but will not delete your files or settings.
1. With the phone powered off, press the VOL DOWN KEY for 2-3 seconds then POWER key then release.
2. The device will display different BOOT OPTIONS
3. Use the VOL DOWN Key to SCROLL to Recovery and VOL UP Key to select
Tip: If the device reboots, you may have waited to long to make a selection, you will need to begin the process again.
4. The device will display the Motorola logo and then the Android in distress ( logo with Exclamation mark)
5. Press and hold the VOL UP key for 10-15 seconds. While still holding the VOL UP key tap and release the POWER key
Tip: You can try this step, holding the phone in landscape. If you are stuck on step 6, try a force reboot by pressing the Power key and Vol Down key, and start the process again.
6. The device will display additional menu options (Text will appear in BLUE)
7. Use the VOL DOWN Key to scroll to wipe cache partition and the POWER Key to select this option
8. The device will then perform the partition wipe
9. The device will reboot and start the normal power up sequence
Ever since it hasn't had any problems, but it's only been a few hours as well.
The issues started happening again...turned off wifi and everything resynced perfectly...
ShamanicEnzan said:
The issues started happening again...turned off wifi and everything resynced perfectly...
Click to expand...
Click to collapse
Have you tried it on a different router?
Sent from my Nexus 7
phositadc said:
Have you tried it on a different router?
Sent from my Nexus 7
Click to expand...
Click to collapse
I haven't been able to yet, I'm hoping to at work, but my current router works with my laptop and my old HTC
ShamanicEnzan said:
I haven't been able to yet, I'm hoping to at work, but my current router works with my laptop and my old HTC
Click to expand...
Click to collapse
If it doesn't work properly with a different router try exchanging it. Also have you gone into advanced WiFi settings and forced the moto x to 2.4 GHz? If give that a try.
Sent from my Nexus 7
phositadc said:
If it doesn't work properly with a different router try exchanging it. Also have you gone into advanced WiFi settings and forced the moto x to 2.4 GHz? If give that a try.
Sent from my Nexus 7
Click to expand...
Click to collapse
It was set to auto, I set it to 2.4 ghz...now to wait if it happens again.
phositadc said:
If it doesn't work properly with a different router try exchanging it. Also have you gone into advanced WiFi settings and forced the moto x to 2.4 GHz? If give that a try.
Sent from my Nexus 7
Click to expand...
Click to collapse
The force to 2.4ghz actually made the problem occur a lot faster, any reason it might be due to the massive amount of wifi networks around? When I set to scan 5 ghz there was only one still open, I might go into my router and see if I can change the atenna settings.
EDIT: Turns out if I go to 5 ghz my computer can't connect, but I changed the channel to something less populated in the area to see if that helps.
DOUBLE EDIT: It appears to occur after I'm supposed to get a Facebook notification, at that point I don't get any more notifications....attempting to clear out facebook data and cache to see if that does anything
Try disabling WMM on your router.
drilus said:
Try disabling WMM on your router.
Click to expand...
Click to collapse
Forgive the stupid, but what's WMM short for in case that's not readily apparent?
Edit: I've also noticed the problem is exponentially worse after I upload pictures to facebook
Edit Edit: Found WMM, turned it off, let's see what happens.
I has this kind of issue before and did a cold boot but nothing happaned. so my last option was to do a restore. After that, my WIFI connection got okay again. problem solved :silly:
alicepattinson said:
I has this kind of issue before and did a cold boot but nothing happaned. so my last option was to do a restore. After that, my WIFI connection got okay again. problem solved :silly:
Click to expand...
Click to collapse
You mean full reset? It looks like I may have to do that with the idle battery drain issue anyways....so that's the last resort.
Hey guys I'm having a similar issue with my moto x on the 2.4ghz band. Speeds are very slow and sometimes cut out completely. Im getting a download speed of about 300kb/s on 2.4 both on auto channel and it doesn't rlly change once I change it manually to an open channel using WiFi analyzer app. My download speeds on 5ghz hit 4000kb/s even with a much lower signal strength.
YouTube and Netflix is unusable and growing the internet sucks. I usually just use the 4g network while at home cuz its a thousand times faster but I'd like this to be fixed regardless. Has anyone found a solution or explanation?
2.4 ghz wifi issues
matt87n said:
Hey guys I'm having a similar issue with my moto x on the 2.4ghz band. Speeds are very slow and sometimes cut out completely. Im getting a download speed of about 300kb/s on 2.4 both on auto channel and it doesn't rlly change once I change it manually to an open channel using WiFi analyzer app. My download speeds on 5ghz hit 4000kb/s even with a much lower signal strength.
YouTube and Netflix is unusable and growing the internet sucks. I usually just use the 4g network while at home cuz its a thousand times faster but I'd like this to be fixed regardless. Has anyone found a solution or explanation?
Click to expand...
Click to collapse
I'm having these issues too. Got the GSM Developer Edition on 11/29. It immediately updated to Kit Kat OTA so I'm not sure whether it had the issue prior to Kit Kat or not. This only happens on 2.4 ghz wifi and only with one of my routers at home, a Netgear WNDR3700v2 running OpenWrt Attitude Adjustment (I tried upgrading from Backfire to see if it would help, it did not). The other router is a Linksys WRT350N and when the phone is connected to that one the problem does not happen. Note, that there are 2 laptops, a Samsung Galaxy S2, and a Kindle Fire HDX that have zero problems with the WNDR3700. All can transfer data perfectly fine and at high speeds. Thus I do not think the router is bad. Have not checked work routers. 5 ghz wifi is totally fine and indeed very good with this phone.
For me, the problem is that the phone seems unable to receive data at high speed (over 1Mbps) on 2.4 ghz wifi in any area where the signal isn't perfect and sometimes even in the same room as the router (although usually it is fine there). Oddly in many cases when it has trouble receiving it can send data much faster. It almost seems like it might be some kind of interference as it is rather random.
At this point I'm wondering if the phone has a defective 2.4ghz subsystem, though that seem unlikely due to good transfer with the WRT350N, or if this is some kind of wifi tuning software bug in the phone.
Any info would be appreciated. Does anyone have this issue who did not have the issue on Jellybean? Am wondering if anything changed with wifi for the update? Note, I have tried clearing the cache in recovery as noted in another thread with no luck. Anyone have the WCNSS_qcom_cfg.ini file from Jellybean for this phone? Would rather not reflash just for 1 file.
Thanks.
glimmer00 said:
I'm having these issues too. Got the GSM Developer Edition on 11/29. It immediately updated to Kit Kat OTA so I'm not sure whether it had the issue prior to Kit Kat or not. This only happens on 2.4 ghz wifi and only with one of my routers at home, a Netgear WNDR3700v2 running OpenWrt Attitude Adjustment (I tried upgrading from Backfire to see if it would help, it did not). The other router is a Linksys WRT350N and when the phone is connected to that one the problem does not happen. Note, that there are 2 laptops, a Samsung Galaxy S2, and a Kindle Fire HDX that have zero problems with the WNDR3700. All can transfer data perfectly fine and at high speeds. Thus I do not think the router is bad. Have not checked work routers. 5 ghz wifi is totally fine and indeed very good with this phone.
For me, the problem is that the phone seems unable to receive data at high speed (over 1Mbps) on 2.4 ghz wifi in any area where the signal isn't perfect and sometimes even in the same room as the router (although usually it is fine there). Oddly in many cases when it has trouble receiving it can send data much faster. It almost seems like it might be some kind of interference as it is rather random.
At this point I'm wondering if the phone has a defective 2.4ghz subsystem, though that seem unlikely due to good transfer with the WRT350N, or if this is some kind of wifi tuning software bug in the phone.
Any info would be appreciated. Does anyone have this issue who did not have the issue on Jellybean? Am wondering if anything changed with wifi for the update? Note, I have tried clearing the cache in recovery as noted in another thread with no luck. Anyone have the WCNSS_qcom_cfg.ini file from Jellybean for this phone? Would rather not reflash just for 1 file.
Thanks.
Click to expand...
Click to collapse
For what it's worth I have this same Netgear router and have had the same connectivity issues on both 4.2.2 and 4.4.
I did some reading today and found a couple possible fixes I plan on trying out. First one is to disable WMM. Secondly I found on the official netgear forums that they have had major issues (some of which you've described) with all firmwares ending in the .30s and went so far as to pull them from their download section.
My router was running firmware .36 and I successfully downgraded it to the latest stable firmware .12 that netgear now recommends.
Hopefully 1 of those 2 fixes improves the performance, at any rate I really think it's something with the router itself and not the moto x.
Sent from my XT1060 using xda app-developers app
Thanks for letting me know this was also an issue on 4.2.2. Saves me the trouble of flashing back just to test.
I will be interested to know if your using official netgear 1.0.0.12 firmware fixes the issue for you. I haven't actually ever used the official firmware as I've run OpenWRT since I got the router a year or two ago. 10.03.1 had the issue, and it appears 12.09 does as well. I may try a trunk build at some point to see if that changes anything.
I had previously written that all was well on the 5 ghz band. This appears to not be 100% correct. Yesterday evening and this morning I found myself "connected" to the 5ghz band without actually having working internet. Toggle wifi on/off fixes it, but I shouldn't have to do it.
Not sure if this helps, but on the 2.4 ghz side things do work better on one side of the house vs the other. Also it seems that I can get a very fast connection at times and then it stumbles and gets stuck going under 1 Mbps. I still suspect either a defect or some kind of low level radio issues with the moto or the router regarding interference from neighboring wifi access points (there are a lot around me, single family houses on small lots). However, keep in mind no other device has these issues but the moto. In the rare instance I venture into a bad signal pocket the signal indicator goes down and speed slows or they lose connection vs the moto where it can show excellent signal and have no/nearly no connectivity.
I haven't tried it for long, but switching to wireless g mode vs ng may improve stability though I only briefly tried it. I did walk around part of my house checking the Mbps with the app "WiFi Speed Test" and while way slower than N mode it was far more stable. Even if this does work it is a definate downgrade in speed though.
Well its only been a day or two so it may be too early to tell, but so far my wifi seems much better after making those two fixes I mentioned above. This is on 2.4 band, the 5ghz band doesn't provide me enough signal strength to use all the time (router is too far from my bedroom).
The main issue I was having was my wifi signal would cut out even though it still showed a good connection. I could swipe down on the status bar and see no download arrow next to the wifi icon so I knew I wasn't receiving data. However a simple disconnect and reconnect to my wifi would fix the problem until it happened again. This seemed to be most common while watching YouTube videos, in fact it happened far too often which is why I went searching for a solution.
So as I mentioned things seem to be better for sure so far but I need to give it a week or so to see how much it is really helped, but so far I can't remember any wifi cutting out since I've made those two fixes.
Sent from my XT1060 using xda app-developers app
I have noticed lately that my Moto X will sometimes not connect to my home WiFi. At all. Until I reboot the phone. Toggling WiFi on and off, and forgetting the network do nothing. Other devices (other phones, computers, tablets, TV, etc) are all connected fine, but won't connect. It can see the network, but that's it.
It's only my Moto X and only my home WiFi. It only happens once or twice a week, but it is annoying to have to reboot.
Mostly unrelated, but my Bluetooth icon doesn't always change state. I've noticed that sometimes even hours after getting out of my car the Bluetooth icon is white instead of dim gray like it should be when not connected. That doesn't seem to have any bearing on the ability to connect, just something I've noticed. Usually toggling BT off and on again fixes the issue.
Phone is a rooted 4.4 Verizon Moto Maker edition. I do have SnapDragon Battery Guru installed but I never set anything up to save power. There is a setting in stock WiFi settings about consuming less power on WiFi, but that would seemingly impact all networks, not just home, and it would only be in play once I am connected to the network, not before.
I do use Tasker to enable my WiFi when I get near home (based on cell towers when and I'm NOT connected to BT in my car), so WiFi typically shuts off when I leave home, turns on when I get to work (based on calendar events), turns off when work is done (calendar) and then turns on when I exit my car (BT disconnects and I'm connected to one of a few nearby towers). Only seems to happen when I get home from work, so it could be something in Tasker not properly enabling WiFi? If I notice it again I will try to connect to another different network before rebooting, if there any unsecured networks nearby at the time.
Thanks for any advice.
FYI... I use Tasker almost twice a day to shutdown wifi and turn on bluetooth (among other things) and have never had an issue connecting to any wifi. Not saying that is not a possibility in your case but it certainly hasn't been my experience.
Solutions Etcetera said:
FYI... I use Tasker almost twice a day to shutdown wifi and turn on bluetooth (among other things) and have never had an issue connecting to any wifi. Not saying that is not a possibility in your case but it certainly hasn't been my experience.
Click to expand...
Click to collapse
Thanks. I don't think it's Tasker, I've used it for years and never had any issues either.
I used screen record in Gravity Box to show what it does when I try to connect. It did what I described above upon arriving home from work today.
https://copy.com/fU1Gork0RZZmkXA
I tried connecting to my home network and then an xfinity network that uses a Web login or whatever to authenticate after connecting. Neither would work.
It would show full strength until I tap connect and then it goes to the lowest signal and does nothing.
Rebooting now, I guess.
I have the same problem. Some other user advised me to configure my router as "G only" and it has worked.
Enviado desde mi XT1058 mediante Tapatalk
santi.i said:
I have the same problem. Some other user advised me to configure my router as "G only" and it has worked.
Enviado desde mi XT1058 mediante Tapatalk
Click to expand...
Click to collapse
Thanks. I've had some other issues with my router lately too, so I did a factory reset yesterday afternoon. There were some plaguing speed and latency issues on wifi only. I learned that the smart TV while plugged in to ethernet, was still setup to use wifi. I don't know the spec on the wifi adapter in it, but I changed it to ethernet to see if the link speed for wifi devices would go up. It did jump from 24Mbps to 65Mbps, but still felt sluggish.
I will monitor it this week and see if it still has issues connecting. I don't want to limit to the G speeds, as everything that uses the wifi is N, I believe. There are three of us, all with new phones (2 Moto X and an S4), and one laptop that is used often, but it was bought in late 2013, so it (probably) has an N card.
I enjoy the battery life that wifi allows, but can't stand the 200-400KB/s speeds it seems to be offering. It has to be something with my home wifi, because when I'm on my wifi at work (fiber line) and load gifs from reddit they hit 2-3MB/s according to my network monitor.
If you have a dual band router.... connect to the 5ghz frequency.... that worked better for me. The 2.4ghz had a better range, but kept getting page errors or disconnects
Sent from my XT1060 using Tapatalk
I just received my gen 2 moto x last night and am having trouble connecting to Wifi at work. It connects to my home network and one of my work networks just fine, but when I try to connect to the work network I need it to connect to the signal strength drops to "poor" as soon as I press connect. My home network and work network both are password protected. I've verified the password and have the same connection settings as my friend's gen 1 moto x, which connects properly. The work network has excellent signal at all times when I am not trying to connect to it. It just keeps cycling from "connecting" to "saved."
Has anyone else experienced this or know a workaround? I found this but this is for a gen 1 (I'm not sure if that would help) but I'm not rooted so I don't have access to phase 2 authentication. http://forum.xda-developers.com/moto-x/moto-x-qa/wifi-signal-drops-trying-to-connect-t2872241
Thanks,
Mike
mikekory87 said:
I just received my gen 2 moto x last night and am having trouble connecting to Wifi at work. It connects to my home network and one of my work networks just fine, but when I try to connect to the work network I need it to connect to the signal strength drops to "poor" as soon as I press connect. My home network and work network both are password protected. I've verified the password and have the same connection settings as my friend's gen 1 moto x, which connects properly. The work network has excellent signal at all times when I am not trying to connect to it. It just keeps cycling from "connecting" to "saved."
Has anyone else experienced this or know a workaround? I found this but this is for a gen 1 (I'm not sure if that would help) but I'm not rooted so I don't have access to phase 2 authentication. http://forum.xda-developers.com/moto-x/moto-x-qa/wifi-signal-drops-trying-to-connect-t2872241
Thanks,
Mike
Click to expand...
Click to collapse
Exact same problem. Fine at home and everywhere else. Spent a couple hours this week on the phone with Moto. They keep saying it's the network, yet everyone else is on it. They say update firmware and open MAC. Both of which are done.
This is the message in the Access point every 3 seconds when my phone is trying to connect...
"Client Deauthenticated: MACAddress:9c:d9:17:a1:c8:51 Base Radio MAC:b8:62:1f:ad:5e:90 Slot: 0 User Name: unknown Ip Address: unknown Reason:Unspecified ReasonCode: 1"
My wife's phone drops WiFi in favor of 4G LTE at home. I have to turn off data to connect to WiFi but it eventually drops the WiFi. I'm still waiting on my pure edition so I'm not sure if its just her phone or if its a common problem.
bradley26 said:
My wife's phone drops WiFi in favor of 4G LTE at home. I have to turn off data to connect to WiFi but it eventually drops the WiFi. I'm still waiting on my pure edition so I'm not sure if its just her phone or if its a common problem.
Click to expand...
Click to collapse
This!
I have this problem all the time ON multiple networks, its very frustrating
Mines will disconnect from my 5ghz when the screen goes off and reconnects when turned on, works fine on 2.4ghz. I have a Nighthawk ac1900 so the phone is definitely the problem.
Sent from my Hammerhead
This is related to 802.1X, We have it implemented Radius and 802.1X at work and it doesnt connect. But the same AP has a guest SSID which has no protection and a separate vlan which has access only to internet and it works fine.
giovannirc said:
This is related to 802.1X, We have it implemented Radius and 802.1X at work and it doesnt connect. But the same AP has a guest SSID which has no protection and a separate vlan which has access only to internet and it works fine.
Click to expand...
Click to collapse
Sounds like this could be my problem. We have 4 networks we can login to, but they are all broadcast from the same access point. One says "secured with 802.1x" and is for laptops, two say "secured with WPA/WPA2" and are for cell phones/other, and the final is unsecured. I can only connect to the unsecured network.
So does it sound like it's the phone that's refusing the network, the network is refusing the phone for something the phone is sending back to it, or the network is refusing the phone for another reason?
I'm having this same issue. 1st Gen Moto X sitting right next to 2nd Gen, and the 1st Gen is connected while the 2nd Gen can't.
I'm having the exact same issue. It appears the problem is that older Cisco firmware doesnt support 802.11w, which is what the moto x 2014 uses by default. Here is a thread where a moto rep explains it to Cisco - https://supportforums.cisco.com/discussion/12331486/connectivity-issues-cisco-controllers-and-pmf-enabled-moto-x-gen-2
My girlfriend and I have this phone and we had a similar problem. It would connect/reconnect like a billion times before staying connected on our home network but connect fine on other networks. I tried several solutions but the one that worked was changing the channel on the router. I live in an apartment building and there are a lot of WiFi networks around me so I figured that might be causing some interference. I changed my channel from 6 to auto (it automatically jumped to 11) and now it connects instantly and is solid. What's weird is I tried channels recommended by WiFi analyzer and my other devices would connect just fine but the Moto X's couldn't even see the network in the list when it was on a lot of channels like 12, 13, and 14.
Seems like a weird WiFi radio firmware bug to me.
Is there a client side fix for this?
I just ran into the problem at my work. It is a major hospital. They are not going upgrade their cisco firmware so a couple of people's personal phones are able to connect to the network.
WiFi in general is bad on the X2014 and I am reading the same in the Droid Turbo forums.
Sent from my XT1095 using XDA Free mobile app
What!? Really?
I've not had a single issue with WiFi connectivity. I'm an IT professional so heavily reliant on WiFi.
will54880 said:
WiFi in general is bad on the X2014 and I am reading the same in the Droid Turbo forums.
Sent from my XT1095 using XDA Free mobile app
Click to expand...
Click to collapse
Wutang200 said:
I've not had a single issue with WiFi connectivity. I'm an IT professional so heavily reliant on WiFi.
Click to expand...
Click to collapse
I never had a WiFi problem with the Moto X 2014 until today at work. It wouldn't connect to a few different clients Wireless APs. At the first client site I power cycled the phone and WiFi still wouldn't connect. I then went to another client site and once again it would no longer connect. I power cycled again and this time it connected just fine albeit Bluetooth was acting funny and not connecting to the Moto 360. After cycling Bluetooth off and on again the 360 finally connected. Not sure if this is an actual issue or just dumb luck. I wonder if anyone that was having WiFi issues with this phone also has a Moto 360 connected via Bluetooth?
I don't own a 360 and my bluetooth is normally switched off unless I'm streaming music at home.
I know none of what I am about to write will solve anyone's issue but sharing my experiences mught help understand you're not alone. I wander between as many as a dozen different wifi networks daily. I manager a 63 room hotel on 7.5 acres where we are currently running EnGenius EAP350 AP's broadcasting in 2.4mhz band ONLY using .11bgn. I set the entire network to use one SSID so roaming is, in theory, problem free. My XT1095 has not had any issues at all here on property.
I also have my personal network in the lobby and main building under 2.4/5/.11AC side by side with out guest network. No issues bouncing around. I honestly expected issues but have found none.
There is one issue I have found in Android in general which can happen randomly, or I have not been able to induce the behavior only recognize it. Occasionally when I move from one building to another Android (ICS forward for sure) will forget which actual AP it's after and just hang. My solution is to tell the device to forget that node then once forgotten the network, of course, shows up in the list. I then select it and boom we're back in business.
I do have issues when I visit a network at say, the grocery store which requires accepting an EULA...the device simply will hang Wifi wize, even when I delete and reconnect I won't get the note to open the authorization page. I end up just killing wifi and going with LTE.
I get the same behaviors from all my phones ICS though Kitkat, don't have Lollipop yet darn it!!
I have long been frustrated with this weirdism from Android but have reached a point of M.A.D. with my devices but never found a solution.
I have noted I have the most issues by far with Cisco/Linksys devices. It has been almost assured that if I have an issue it's one of those routers running an older firmware version (amazing how many AP/routers use default password settings...I mean, really???)
Not 100% sure it's a firmware only issue but I do think it's some common bit of hardware in an AP/Router which can go spastic for some reason preventing Android from figuring out how to remain or get connected. I even had one of the EnGenius AP's go nuts, a fast swap with a freshly configured AP resolves but, again, still does not identify or solve the problem
I also sense there is some oddness deep in the bowels of Android's wifi/networking subsystem which just was never written correctly and may never be fixed.
Last I run and app called Wifi Analyzer by Kevin Yuan, it helps me a GREAT deal because I can target a specific AP/node to connect with. Android versions often defeat this by not remaining connected to that desired target AP and switching to something else. Here is where I think some of the issues with wifi connectivity live...Google MUST spend some time refining their wifi subsystem.
No matter this is a Very frustrating issue when it happens. My best solution has always been to forget the current connection then reconnect with it again once it reappears. Better yet use Wifi Analyzer or similar app to target a specific AP/node and connect/forget from inside the app, that really does seem to help, mostly...sigh, I know, sorry...
This WiFi issue is really aggravating. I have tried so many things:
1. Rebooting Router
2. Powering Off/On Phone
3. Turning WiFi Radio Off/On
4. Resetting Phone Cache Partition
5. Using WiFi analyzer and setting my router to various channels manually
6. Changing Router SSID
7. Forgetting SSID on phone and re-adding it
8. Verifying MAC Filtering is not enabled
9. Enabling MAC filtering and specifically allowing phone MAC address
10. Disabling "Avoid Poor Connections" in WiFi settings
11. Manually setting WiFi frequency band to 2.4ghz in phone settings
12. Disabling "WiFi Optimization" in phone settings
23. Changing WiFi direct and BT phone names (yeah, a big stretch, but I read somewhere that this worked)
24. Installed updated firmware on my ASUS RT-N12D1 (3.0.0.d.376_3602)
25. Disabled WPS on router
26. Switched router between Auto, Legacy and N-Only
27. Disabled Authentication and Encryption on router, just an "Open" connection.
After all of this, the phone still has WiFi connectivity issues. Sometimes after a phone power cycle it will connect to WiFi, but never for very long. Every other device I have connects to the WiFi without issues. I just got the Moto X a few days ago (AT&T version) and this is the first time I have ever had a device with WiFi connectivity issues like this. Very aggravating. There is clearly something wrong with either the hardware, or software on the phone.
There are some other oddities. When it won't connect to WiFi, there is something strange with the phone. Its not like it just can't connect or stay connected to WiFi, but somehow it seems like the WiFi is in a stalled state. Sometimes it won't show any WiFi networks and just says "Searching for WiFi networks..." until I turn off wifi and turn back on again. Then as soon as it turns back on, it will show the nearby SSID's, and try to auto-connect to my router, but after a few seconds it shows "Disabled" under the SSID. Then after a few seconds the disabled goes away, and it just shows the SSID name. It also won't let me change the WiFi Direct phone name while the WiFi is in this state, it gives me an error saying "Failed to rename device", followed by "Group Creation Failed". However, when I am actually connected to WiFi, I can rename the WiFi direct name just fine. So its not just simply an issue with bad radio signal or something, but something more serious, like the WiFi state is hung or something. If I can't resolve this in another day or two, I am going to have to return the phone, and hopefully a replacement will work. If not, I might have to get something other than a MotoX because I can't not have WiFi while at home and work.
---------- Post added at 12:29 PM ---------- Previous post was at 12:10 PM ----------
I found a way that seems to work to connect to WiFi. To clear, this isn't a fix for the data-sync issue that some people are having, or poor signal, but the issue where you can't connect to an SSID, and there is no error or anything.
1. Hold Down Power Button
2. Turn Airplane Mode On
3. Turn Wi-Fi On
4. Connect to SSID
5. Press Power Button down again
6. Turn airplane mode "Off"
I have now tried this several times, and it works everytime. If I turn off Wi-Fi and back on again, it won't connect, until I do the airplane mode trick. I don't know who to give credit for this, I have spent days and hours searching, and I remembered reading that from somebody else, but not sure where, so this is not my fix, I am just posting it here as it seems to work.
This issue is strange, and must be some combination of Android, and Motorola software/hardware/firmware configuration. I hope they get this fixed, but it at least now, this temporary fix will work whenever WiFi is not connecting.
For those of you getting WiFi connectivity problems, it could be related to your router setup. Download an app called InSSIDer and run a scan, then choose a channel that's not being used but make sure it's 5 channels higher or lower. For example, if it detects 3 networks on channels 3, 5 & 6, then you want to choose channel 10 or 11. If it detects one network on channel 6, then you should choose channel 1 or channel 10 or 11.
I noticed issues like this when I bought my Nexus 4 after my iPhone 4. Android devices seem to ship with rubbish WiFi radios.
Like I've mentioned before, I've not experienced a single disconnection with my phone either at home, work, in laws, coffee shops or anywhere else ever. Same with my first gen Moto X.
Mine is slightly different. Now and then, after power cycling or rebooting, it forgets all the WiFi passwords. Not every time. Just now and then.
Also sometimes it's quite fast, some slow. My wife's firs gen is pretty constant.
Issue: While connected to my EA6900 (1900 AC) linksys wireless modem my data dies. If I turn off wifi, I am able to call out, (although patchy), get texts, and use android services. As soon as I turn on wifi, these services all seem to shut down. Although sometimes some data is able to eak through.
Background: I am using a Moto x (2014) Pure Edition on the AT&T Network. I have confirmed time and time again that wireless works on my network, I have a full wifi signal and decent LTE signal (unsure how strong -- it shows 2-3 bars). I had this problem initially in 4.4.4 and it persists in 5.0 (I updated to see if that would fix the issue. Previously I had and HTC One with no issues what so ever. Reboots do not fix this issue and ATT has told me it is not their problem.
Hypothesis: I think the Moto X 2014 has problem connecting on the 5ghz (duel band) or AC networks. I have noticed while at work or other locations, I have had no connectivity issues with wifi on. I am pretty sure they are using standard 2.4ghz G and or N connections. I believe that the phone is unable to switch between the range of bands and causes it to lose data connectivity.
Has anyone had this issue or can anyone correct it?
I don't have an ac or 5ghz router so I can't test this. Have you played with the WiFi frequency band under advanced WiFi? You can force connect to 5ghz or 2.4ghz.
You could also turn off ac on the router configuration page to see if you can connect on n.
When I have time I will play around on my network to try and force the connection to different protocols. I have an AC router from EnGenius it's their ESR1200 which is a consumer grade device but pretty nice over all and was a steal at $60 over on Amazon:
http://www.engeniustech.com/home-networking/routers/16742-esr1200
But will try a few options. Right now I have it connected to the 5ghz band w/o issue. I can add I have long encountered issues for Android when moving between wifi networks. It has always been prone to struggling to juggle connections, even when switching nodes on a mono-SSID network. I can trace my issues back to Jelly Bean. But it seems like you are seeing something different.
If I find anything I'll post it soon as time permits, busy week for me at work or I might get lucky and just die in my sleep.
EDIT: For giggles I forced a connection to the 5ghz side and sent some texts as well as a couple calls w/o issue. Was able to receive as well. Mode is .11n of course and a solid 433mbps network connection speed
This is where my hypothesis really dies... I have attempted forcing 2.4 or 5ghz but both failed. The other option is the phone doesnt play nice with the EA6900... which is seemingly supported by the fact that my phone hasnt had any issues while i am connected to my parents house for thankgsiving. They are running 2.4ghz at a blazing 65mbps (i usually average around 400 at my house on my ea6900). Could it be the AC modem? One other thought is chromecast is somehow interfering with my phone. I will need to try removing chromecast when i get home to see if that works, but at this point, i would find it hard to imagine.
This is literally driving me up a wall.
EDIT: So I am at home at it has been running better but just now it has decided to seize up. Showing same info... 2.4ghz 65mpbs same network... full bars.... att shows 3/5 bars but doesnt say LTE or H or anything..just ATT (pretty sure thats normal)
http://www.amazon.com/gp/aw/cr/B00EXK14S0/s=sd/ref=mw_dp_cr
There are a bunch of comments about it overheating and dropping signal repeatedly. I would think about returning it under warranty.
kcustom11 said:
http://www.amazon.com/gp/aw/cr/B00EXK14S0/s=sd/ref=mw_dp_cr
There are a bunch of comments about it overheating and dropping signal repeatedly. I would think about returning it under warranty.
Click to expand...
Click to collapse
I owned this router and had problems with android devices staying connected.
Sent from my Nexus 6 using Tapatalk
kcustom11 said:
http://www.amazon.com/gp/aw/cr/B00EXK14S0/s=sd/ref=mw_dp_cr
There are a bunch of comments about it overheating and dropping signal repeatedly. I would think about returning it under warranty.
Click to expand...
Click to collapse
I wanted to blame my router very badly... however i have never experienced any drops on my laptop -- unless my laptop somehow deals with drops better than my phone...
Has anybody had any problems with their WiFi not connecting? My device seems to fail to connect to wifi after a couple of days and just sits trying to connect. Toggling WiFi doesn't seem to resolve it, and I have to reboot the entire phone to get it back online.
No problem here.
Connects very quickly, never seen it fail to connect, even on my works dodgy BT homehub 3, which used to tie my old Z3 compact up in knots..
Yep.I thought that Snapdragon 835 cause this problem. Xi oami 6., ZTE z17 and Op5 had the same question with WI-FI connection.
gesongwei said:
Yep.I thought that Snapdragon 835 cause this problem. Xi oami 6., ZTE z17 and Op5 had the same question with WI-FI connection.
Click to expand...
Click to collapse
I have a sd835 s8 and I haven't had any wifi issues whatsoever since launch. It's a sample size of 1, but I don't know if it's truly due to the sd835
I haven't had any WiFi issues. In fact my WiFi connections have improved using the XZ1 compact over the X performance (the X performance dropped its WiFi connections 3 times during my data transfer to the new phone)
I've had my XZ1c for about a week now (European model) and it connects to my home network (5G) normally. Signal strength is fine, although the galaxyS6 it replaced definitely had superior reception. I do have wifi issues, but only when already connected to the network. When the phone is asleep (screenlocked) it seems to lose an active connection. The wifi connection should be on at all times, even asleep. It will show the wifi symbol, but data apps don't load, and it will have lost the connection as remote for spotify connect (playing on my reciever). It will also switch to mobile data at random times with normal wifi signal strength (even though I toggled this function off in the developper settings).
I'm not sure if this is something that can be fixed through system updates. I haven't seen any forum posts with similar problems though, so I'll try to document what is actually happening before I contact Sony support.
I bought the US version and flashed the UK firmware to get the fingerprint reader to work. No issues whatsoever with this phone. No Wi-Fi issues, overheating, signal strength, battery, nothing. Everything works just perfectly.
Same issue here. Mine is Europe (NL) version. The upload and download speed can be very unstable. And especially when I take it a bit far way, even you see that it's connect to the wifi with full signal strength, it said internet is unavailable.
I'm not sure if this related to the system update of last weekend or not.
Further to my issue. My phone will drop wifi connection and repeatedly try and connect - it usually cannot see any other networks at the time. Restarting the wifi on the phone, or rebooting the access point do not help. Running a packet sniffer on the LAN shows no activity, which indicates the issue is to do with wireless handshaking.
The problem occurs every few days and the only way to resolve it is to reboot the phone, which fixes it instantly.
I contacted Sony and they told me to do a complete reset on the phone, this didn't work. I updated my findings and pointed out that it's seems to be a firmware compatibility issue. Of course, you only get to talk to first line, and as a reset didn't work, they want me to send it off for a warranty repair (which of course will be returned with "no fault found" as no doubt their wifi will be different enough for it not to have been picked up on day 1 testing).
I'm currently trying to gather a bit more information on the fault, e.g. does it only happen on my home wifi etc. I've disabled channel bonding but that didn't help, and I've not jiggled my DHCP settings after seeing plenty of posts describing wifi problems on Oreo for other phones.
It doesn't happen frequently enough and I don't have the time to delve deeply into the network to identify the cause.
One interesting thing was that it went funny at home, but it was working when I got to work. When I got home it still couldn't connect. So I suspect it's to do with a particular compatibility issue somewhere.
no problem here conecting to 5 and 2.4 wifis...
android_fury said:
I bought the US version and flashed the UK firmware to get the fingerprint reader to work. No issues whatsoever with this phone. No Wi-Fi issues, overheating, signal strength, battery, nothing. Everything works just perfectly.
Click to expand...
Click to collapse
I haven't gotten around to this yet. Do you still have wifi calling and volte available?
---------- Post added at 11:05 AM ---------- Previous post was at 11:04 AM ----------
So far my wifi has been fine...
Mine is worst, i couldnt get it to connect at all but all my other device including xperia xa, xzp, laptop, Ps4 PS3, everything connect without any issue whatsoever, already excahnged once and still the same.
Think mine is struggling with either a single access point or VLANs. I need to dig further, but that requires buying a new AP - this phone is getting more and more expensive!
exactly same issue as Dashers describes with my XZ1c. I am not watching it closely, but it seems that it is hapenning after around 2 days online. Never happened before on same network with my previous Z3c, which had run months without restart and any problems whatsoever (till its display died
Dashers said:
Further to my issue. My phone will drop wifi connection and repeatedly try and connect - it usually cannot see any other networks at the time. Restarting the wifi on the phone, or rebooting the access point do not help. Running a packet sniffer on the LAN shows no activity, which indicates the issue is to do with wireless handshaking.
The problem occurs every few days and the only way to resol... .
Click to expand...
Click to collapse
I have more or less the same issues, and a reboot always solves it. It happens with both routers form ASUS and Draytek.
Additionally I see issues with Spotify connect dropping or not being found on my Sonos (hardwired to LAN), but not so much to Chrome Cast Audio on the same network.
I don't have a problem connecting to wifi, but I seem to have a different issue. Even though wifi scanning is toggled off in settings, my phone still seems to be scanning according to Battery Historian. I think this is one of several things contributing to my high idle drain. Does anyone else have this problem?
jrbmed08 said:
I don't have a problem connecting to wifi, but I seem to have a different issue. Even though wifi scanning is toggled off in settings, my phone still seems to be scanning according to Battery Historian. I think this is one of several things contributing to my high idle drain. Does anyone else have this problem?
Click to expand...
Click to collapse
Have you turned wifi scanning off ?
settings\Lock screen & security\Location\Scanning - turn wifi scanning off
Didgesteve said:
Have you turned wifi scanning off ?
settings\Lock screen & security\Location\Scanning - turn wifi scanning off
Click to expand...
Click to collapse
Yes, wifi and BT scanning are both turned off in settings and have been since the beginning, but both seem to be happening anyway according to Google's Battery Historian tool. When I go back in to see if they've been toggled on by an app or something, they still appear to be off.
Dashers said:
Further to my issue. My phone will drop wifi connection and repeatedly try and connect - it usually cannot see any other networks at the time. Restarting the wifi on the phone, or rebooting the access point do not help. Running a packet sniffer on the LAN shows no activity, which indicates the issue is to do with wireless handshaking.
The problem occurs every few days and the only way to resolve it is to reboot the phone, which fixes it instantly.
I contacted Sony and they told me to do a complete reset on the phone, this didn't work. I updated my findings and pointed out that it's seems to be a firmware compatibility issue. Of course, you only get to talk to first line, and as a reset didn't work, they want me to send it off for a warranty repair (which of course will be returned with "no fault found" as no doubt their wifi will be different enough for it not to have been picked up on day 1 testing).
I'm currently trying to gather a bit more information on the fault, e.g. does it only happen on my home wifi etc. I've disabled channel bonding but that didn't help, and I've not jiggled my DHCP settings after seeing plenty of posts describing wifi problems on Oreo for other phones.
It doesn't happen frequently enough and I don't have the time to delve deeply into the network to identify the cause.
One interesting thing was that it went funny at home, but it was working when I got to work. When I got home it still couldn't connect. So I suspect it's to do with a particular compatibility issue somewhere.
Click to expand...
Click to collapse
I have this exact problem. One second its 100% signal and is workin as expected. The other second it just drops and tries to reconnect like crazy. I have even had moments when i am unable to find my wifi after said disconnect. All my other devices is working like normal on my wifi. Using Asus n66u 5ghz.
I have been having the same issues as mentioned above with my XZ1 compact(european). My issues with dropping wifi signal seems to be happening when there are two different wifi signals to choose from. They are both on my local network. One is an extender due to the size of my house. When it can detect both signals, it can't make a decision on which one to choose. Once I remove a device(forget wifi device), it stays connected to the other with no problem. Since it isn't trying to compete with the other.
Has there been any improvement on this issue?