Hi everyone! I broken the screen of my P9 Plus, and there isn't official support for that phone in my country, so I had to buy a new screen+touch module and install it by myself. The installation was ok, but now the screen precision is terrible. Also I lost the 3d touch function and the possibility of screen capture with double knock.
So that repairship was very sad
Is possible that the screen module was SO fake? or did i omit any procedure? I don't know, may be like as a hard reset, or a recalibration... I didn't found nothing about that on the internet. Anyone with same experience?
Thank you!
what did u pay for screen and touch?
USD 275
Im from Argentina
Nobody?
I want to tell you that I returned the failed screen module. I will N E V E R buy here in Argentina again.
I bought a new screen module on eBay, from China, and now the screen precision is ok. The screen works mostly well, BUT... Im still without knuckle gestures and Force Touch functions...
So, I still with this issue... partly.
Besides, I get a little flashing or blinking (or flickering, sorry for my bad english, how should I call this? the screen turns off for 1 second and then returns to normal) every so often... I mean, every 2 or 3 minutes approximately. Maybe more.
Is there anything I can do? Any similar experience?
Help please, I read a lot on the internet and I did not find comments regarding experiences in screen changes on P9 Plus.
Any comment please
Thanks in advance!
let professionells do the work. I have replaced my screen two times with no problem. (Price: $200)
The problem is that there are no professionals working with this model here. That is why I have changed screen by miself. I hadnt another choice...
mati9054 said:
The problem is that there are no professionals working with this model here. That is why I have changed screen by miself. I hadnt another choice...
Click to expand...
Click to collapse
aha, understand.
Here again, I would like to ask a question...
I was watching carefully the screen that I have ordered, and I noted that it has a little window in lower left side... But there is nothing inside...
Like this: (look at lower left side of the screen, a little "orange window")
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
BUT... in my original screen that little window contains a connector or a flex, covered with a black sticker... like this
And this is the little flex or connector that i can see below:
Please... I need to know if I'm right when I say this could be related with Force Touch and knock-knock special functions...
Do you have any information on this? (or where could I get it?)
Thanks in advance!
Related
Hello,
I have broken the LCD before and it looked like this.....http://www.ppctechs.com/AT-T-Tilt_974/repairs/LCD-Touchscreen-Repair-Service_1025-373.htm
So I fixed the lcd and everything was good untill today....
I droped the phone from about 2 feet and the screen isnt cracked but everything is very bright now. I took 2 pictures below but its hard to see becuase well its hard to see on the phone. everything still works. I can still make calls and use it but its just very bright almost no color.
Does anyone know if it can be something loose? do i just need a digitizer? or do I have to go and buy the whole lcd/ digitizer combo again?
thanks so much
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Im runing a att tilt with the jan 3 hyper dragon rom.
It looks like the connection isnt seated properly. You may want to take it back apart and make sure its tightly seated. Dropping it may have jarred the connection loose.
This phone is a new htc i got never been opened... but i just opened it right now and disconnected everything and re connected, and it still like that...
anyone else have any other ideas or advice,
thanks for ur input to previous poster
http://forum.xda-developers.com/showthread.php?t=407181
Your not alone... there are other threads with pictures just like this one.
Some seem to be a hardware defect, so if its brand new, that's probably the case.
its actually about 2 years old.
it was used for about 4 months, then put away for a year. then i just started to use it again in December 08
then just today =[
so i dont mind i guess i can buy a new lcd screen and change it, ill keep searching around here
if anyone know thats its a forsure fix ill do it. thanks again for everyones help and suppoRT
I was referring to the LCD Ribbon that connects the LCD TO THE MOTHERBOARD. Try simply taking it apart and checking that ribbon before you go order a new lcd ........
Hi,
Very new to the forum, got my td2 from mobilephonesdirect, and have noticed a problem on the screen. when touch flow is running. Most noticibly on the web browser tab, the top half on the p in push page is missing. If i move the screen around i can get the whole white lines that split the sections on the page to disappear. I have ran the lcd test program and cannot see any problems.
Has any one got any ideas, is it a faulty screen or software problem.
Mine does the same, guess its a software problem
pau1200 said:
Hi,
Very new to the forum, got my td2 from mobilephonesdirect, and have noticed a problem on the screen. when touch flow is running. Most noticibly on the web browser tab, the top half on the p in push page is missing. If i move the screen around i can get the whole white lines that split the sections on the page to disappear. I have ran the lcd test program and cannot see any problems.
Has any one got any ideas, is it a faulty screen or software problem.
Click to expand...
Click to collapse
My one has similar situation. First row of 'Add a new Push Page' is slightly strange.
The first line of text is disappeared.
(E.G)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I think it is error of Touchflo 3d, doesn't it?
cactusbob said:
Mine does the same, guess its a software problem
Click to expand...
Click to collapse
If you recall how crappy the original diamonds were when they first came out (Slow and almost unuseable) then it's almost to be expected from HTC. Firmware will hopefully come soon (month or so).
I would phone HTC immediately so they can get their development team on board with rectifying this.
The faster you get on the phone the sooner it will be fixed. There is a good chance that they don't even know about it....
thanks for the speedy replies, i thought i had bought a faulty one. The last htc phone i had was a tytn, this is much better, it runs extremeley fast and touch flo is superb.
I will contact htc and let them know.
Seems you guys did/might have bought faulty ones with either dead or stuck pixels :S Either way, bad news. That's why you always get the third batch that comes out Because third time's the charm
Kraize said:
Seems you guys did/might have bought faulty ones with either dead or stuck pixels :S Either way, bad news. That's why you always get the third batch that comes out Because third time's the charm
Click to expand...
Click to collapse
when is the third batch set to come out...secondly will the ones available in india or the uae be newer diamonds or older ones
Is it normal that my device dont react on 10 points from both sides ?
10 points from both sides? I don't quite get what you mean here, can you elaborate a bit?
why do you need 10 detections at all?
These parts dont work on my device
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Mine either.
Fire up a drawing program and try and draw a line that starts at one side and finishes at the other, seems you can't.
Top to bottom is fine though.
Mine is inconsistent. when drawing from middle to left, it usually stops 5-20px from the edge. When drawing from middle to right, it stops 5-15 px from the edge. When drawing from outside left and into middle it starts on 1st pixel, when drawing from outside right into middle, it starts on 2nd-5th pixel.
This may be an explanation why A on qwerty keyboard is sometimes hard for me to hit with my big fingers.....
But, good to know im not alone, yea its hard to hit Q and P for me :/
last time i checked it works fine on stock rom, but on cm7 i cant use those edges either.
v10B stock rom/baseband/kernel all seems fine. well seems atleast.
OK, good to know but there is no Slovak ROM so i dont know what to flash as stock ^_^
That would be Euro Open
Or whatever other ROM you would like to use. There are differences, but there's nothing stopping you from using one not specifically for your country. Some releases may miss your language though..
IEski said:
OK, good to know but there is no Slovak ROM so i dont know what to flash as stock ^_^
Click to expand...
Click to collapse
stock on Slovak O2x is v10b Euro Open... i had that too, but now i have v10d uk, since it should be one of the latest...
IEski said:
These parts dont work on my device
Click to expand...
Click to collapse
I have an unresponsive area on my device as well, but at the bottom only not the sides...
Marked in yellow...
Hi,
As titled, need help in finding out what's the cause of the problem.
My extreme ride side of the screen (near e edge) for the middle section is not responding to touch anymore, so with e default keyboard, in portrait mode, i can never press the P letter.
I tested the screen with e multi screen test app and i found out that the length of e unresponsive side stretches to around 5 to 6cm in e middle section, with e lower end just under the P letter and stretches up...
I tried to use the Nook screen calibration app but didnt helped, i also reflashed CM7 and Mirage-CM7 over multiple times but still same issue...
Any idea wats going on? It was still working find few days ago
I have just recently started having the same problem on my phone. My HTC EVO 3D is running on D3RPs ICS ROM and I just recently noticed the problem, but I have not tried anything to attempt to fix it yet. Have you made any new discoveries since posting this?
cpm199 said:
I have just recently started having the same problem on my phone. My HTC EVO 3D is running on D3RPs ICS ROM and I just recently noticed the problem, but I have not tried anything to attempt to fix it yet. Have you made any new discoveries since posting this?
Click to expand...
Click to collapse
I suspect might be a hardware problem... I reflashed the rom, installed another rom and factory reset but nth helps....
Seems to be not software problem....:crying::crying:
Hardware for the both of you.
Sent from my SPH-D710 using xda premium
i meet the similar problem from the day before yesterday QAQ the left side of My nook color became unresponsive
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
the white area doesn't work now... i first thought if i broke the screen when i slept... but i find the post:http://bookclubs.barnesandnoble.com/t5/NOOK-Color-Support/nook-color-touchscreen-quot-dead-quot-areas/td-p/1356660? it seems there are some people having the same problem...
what can i do
lawrenceglue said:
i meet the similar problem from the day before yesterday QAQ the left side of My nook color became unresponsive
the white area doesn't work now... i first thought if i broke the screen when i slept... but i find the post: it seems there are some people having the same problem...
what can i do
Click to expand...
Click to collapse
exactly the same issue with me but mine on right side...
is there anyway to fix this? change digitalizer or something?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello forum
I am a Google Nexus 7 user, who accidently dropped the gadget and now the screen is broken. I can see the function inside working all well, no discolouration or tilt or anything else, but the touch is not working anymore. Anyone can suggest a fix ? Because I got it imported in India, so the warranty probably is not applicable in India, besides I don't think hardware damage is covered under warranty.
Any help would be appreciated.
I already miss this amazing device, an ebook reader, a gaming console, a perfect friend.
Thanks for reading
gplustl said:
I has suggestion, you can buy the touch screen digitizer or lcd display or full unit together for both lcd and touch screen to repair your google 7.
it is easy to do it, you can find the instruction in youtube.
if you want to find out where to order it, just let me know.
Click to expand...
Click to collapse
Thanks ! Where to order ? And how much would it cost me ? because I heard in India it is costing me almost 75% to the cost of a new Nexus 7
hemantchhabra said:
View attachment 2085805
View attachment 2085806
Hello forum
I am a Google Nexus 7 user, who accidently dropped the gadget and now the screen is broken. I can see the function inside working all well, no discolouration or tilt or anything else, but the touch is not working anymore. Anyone can suggest a fix ? Because I got it imported in India, so the warranty probably is not applicable in India, besides I don't think hardware damage is covered under warranty.
Any help would be appreciated.
I already miss this amazing device, an ebook reader, a gaming console, a perfect friend.
Thanks for reading
Click to expand...
Click to collapse
Sorry to hear about your predicament
Did you use any kind of Cases for your nexus 7?
Did you have any screen protectors on?
Virtualoddity said:
Sorry to hear about your predicament
Did you use any kind of Cases for your nexus 7?
Did you have any screen protectors on?
Click to expand...
Click to collapse
I do have a screen guard and a small cover for the tablet. But obviously when it fell, nothing could save it from cracking