Database Develop

[STOCK][DUMPS][FIRMWARE] Essential stock firmware and rom dumps

I am not responsible if you break your phone in any way, these are here for your aid. I will help as much as i can, but it is on YOU, the user to read the OP and understand exactly what it is you are doing at ALL times.
READ THIS: http://mata.readthedocs.io/en/latest/ LEARN FROM IT, DONT EVEN CONTINUE UNLESS YOU HAVE READ THIS
These can be used to return to 100% stock as long as you can get into fastboot mode on the device, and have unlocked the bootloader and critical partitions. All images contained in the zips are directly from the essential Fastboot zips and OTA's, and dumps for the rest
Prerequisites:
1. Working fastboot environment in bootloader: (test using the command fastboot devices should return your s/n) Windows drivers are at the bottom of the OP.
Essentials windows drivers contain working ADB/Fastboot and places an environment variable to link to these binaries, i would HIGHLY recommend ditching any and all adb/fastboots you may have (minimal, HTC, etc) and use what is supplied by essential, they just work (Not gonna help you either if your hellbent on using your adb/fastboot).
The zips contain all the firmware (19 Images), TWRP11.img (the latest version), and a stockboot.img (so you can conveniently place on your phone and flash in twrp) when rooting with magisk, and boot.fix.red.img (In case you kill verity).
2. Bootloader unlocked: run the command fastboot flashing unlock in bootloader (THIS WIPES USER DATA, BACKUP BEFOREHAND), conversely fastboot flashing lock will relock the bootloader. I dont recommend this, as there are lots of bricks from messing up a flash and locking yourself out afterward.
3. Critical partition unlocked: run the command fastboot flashing unlock_critical in bootloader (THIS WIPES USER DATA, BACKUP BEFOREHAND), conversely fastboot flashing lock_critical will relock the critical partition flashability. I dont recommend this, as there are lots of bricks from messing up a flash and locking yourself out afterward.
4. Common Sense: Use IT!!!!!
Downloads
Android 10 BTS Folder: https://sourceforge.net/projects/mata-bts/files/10
Q Beta BTS Folder: https://sourceforge.net/projects/mata-bts/files/Q-Beta/
Pie BTS & Novendor Folder: https://sourceforge.net/projects/mata-bts/files/Pie
P Beta BTS: https://sourceforge.net/projects/mata-bts/files/P-Beta/
Oreo BTS & NOVENDOR: https://sourceforge.net/projects/mata-bts/files/Oreo/
The Files below are OLD as dirt BTS
OPM1.180104.010 mega.nz (oreo 8.1 beta1)
OPM1.170911.254 mega.nz (oreo 8.0 beta3)
OPM1.170911.213 mega.nz (oreo 8.0 beta2)
OPM1.170911.130 mega.nz (oreo 8.0 beta)
NMK32F AFH (latest nougat 7.1)
NMJ88C mega.nz (nougat 7.1)
NMJ51B AFH (nougat 7.1)
NMJ32F AFH (nougat 7.1)
NMJ20D mega.nz (nougat 7.1)
NMI81C AFH (nougat 7.1)
Drive Folder of Patched Essential Boot images Credit Goes to @dazeone
Some OLD AS DIRT Novendor zips aswell... if anyone still cares
OPM1.180104.010 mega.nz (oreo 8.1 beta1)
OPM1.170911.254 mega.nz (oreo 8.0 beta3)
OPM1.170911.213 mega.nz (oreo 8.0 beta2)
Windows Drivers
drivers
Unzip this and check out the flash-all.[bat,sh] scripts for win/lin (they're identical but provided for easier flashability).
They're set up to flash to both slots. Most people will want to do this on a back to stock mission, but they can be adjusted if your goal is something else.
If coming from some other rom, you're also going to want to wipe your data, or you're not going to boot. This can be accomplished by the command in the bootloader: fastboot -w keep in mind there are multiple scripts to wipe for you in the zips.
These can also be used to make custom roms/rooted boot images/etc too, so have fun with it!
Thanks:
@invisiblek - aer0zer0 stole his thread, he put most of it together
@aer0zer0 - i stole the thread from aer0, his 2yr old son makes more use of the PH-1 than he does.
@bmg1001 - Root thread, found here root
@dazeone - Provides independent patched boot images and has an awesome YouTube Channel of Guides! DazeOne Youtube Channel
Enjoy

Heck ya

Yesssss

Ill be giving this a shot in a few days hoping to return my phone back to complete stock.

Hot diggity... been fun reading/watching you all work on this through Discord, think I'll go ahead and unlock it while I still have my S8 in case I trash things

Anyone planning on trying to make some custom roms for this phone? I am waiting to see if there will be any decent dev community for this phone before I actually buy it.

vekenti said:
Anyone planning on trying to make some custom roms for this phone? I am waiting to see if there will be any decent dev community for this phone before I actually buy it.
Click to expand...
Click to collapse
Lineage okay for you lol?
You've got one of the top devs on Lineage working on this so I think you're good.

Thank you! I'll be rooting now that we have a safety net!

I am trying this out now got a lot of errors saying:
FAILED (remote: Flashing is not allowed for Critical Partitions
However the main partitions like modem and system seem to work fine.

invisiblek said:
So as we're still waiting for Essential to release official factory images, I thought it'd be helpful to link the dumps that we've produced. These can be used to return to 100% stock as long as you can get into fastboot mode on the device.
Click to expand...
Click to collapse
Thanks for this. My fingerprint sensor was not working for some reason after rooting and I thought i would go completely stock. This thread helped me to go completely stock and get the fingerprint back to working.
Thought I haven't locked the bootloader yet. Will try it later.
---------- Post added at 05:55 AM ---------- Previous post was at 05:48 AM ----------
sarcoptic said:
I am trying this out now got a lot of errors saying:
FAILED (remote: Flashing is not allowed for Critical Partitions
However the main partitions like modem and system seem to work fine.
Click to expand...
Click to collapse
For flashing to critical partition you need to unlock them. The command is similar to unlock boot-loader.
Code:
fastboot flashing unlock_critical
And to lock it again
Code:
fastboot flashing lock_critical

The unlock_critical command worked fine....have you tried updating to the latest build from essential? I tried a couple times and I keep getting a installation problem.

sarcoptic said:
The unlock_critical command worked fine....have you tried updating to the latest build from essential? I tried a couple times and I keep getting a installation problem.
Click to expand...
Click to collapse
New zip on the way. I know why that is. The system image was modified (I had forgot I mounted it once which broke its signature).
I'll update once its ready. Sorry about that.
EDIT: OP updated with new link. Again, sorry about that. Slight oversight. With the new zip the OTA will take fine.

invisiblek said:
New zip on the way. I know why that is. The system image was modified (I had forgot I mounted it once which broke its signature).
I'll update once its ready. Sorry about that.
EDIT: OP updated with new link. Again, sorry about that. Slight oversight. With the new zip the OTA will take fine.
Click to expand...
Click to collapse
Freaking rockstar thanks!

invisiblek said:
New zip on the way. I know why that is. The system image was modified (I had forgot I mounted it once which broke its signature).
I'll update once its ready. Sorry about that.
EDIT: OP updated with new link. Again, sorry about that. Slight oversight. With the new zip the OTA will take fine.
Click to expand...
Click to collapse
Thanks mate.

Thanks for the dump! Just yesterday I was trying to figure out how to do the adb backup command but I gave up cause I couldn't get a good reliable connection to my phone (driver issues, then to failed to connect to device, then to using the adb shell and a mouse on recovery, fun times.)

Great

please can someone guide on how to root it

chambar said:
please can someone guide on how to root it
Click to expand...
Click to collapse
I'm not sure how you missed this:
https://forum.xda-developers.com/es.../guide-rooting-essential-ph-1-magisk-t3701976

charlie.s said:
I'm not sure how you missed this:
https://forum.xda-developers.com/es.../guide-rooting-essential-ph-1-magisk-t3701976
Click to expand...
Click to collapse
Much appreciated, indeed dunno how i missed it.

free XDA points for @invisiblek .......Thanks for putting it all together, hopefully you can get a teiko sports watch when you turn all the points in, LOL
Seriously, thanks for putting it all together

Xposed working flawlessly on Zenfone 5Q/lite zc600kl

Used Twrp to flash SuperSU installed Xposed framework installer and flashed the nougat sdk.
Modules are working
Zuper
Lucky patcher
Gravitybox
3C
One tap video downloader

Few quick questions. Did you use the official Asus unlock app? Can you post a link to the twrp download?

Shakez619 said:
Used Twrp to flash SuperSU installed Xposed framework installer and flashed the nougat sdk.
Modules are working
Zuper
Lucky patcher
Gravitybox
3C
One tap video downloader
Click to expand...
Click to collapse
Where did you get the TWRP? Can you give me the link?
I want to install magisk and enable camera2 api so I can install gcam

DumDumBumBum said:
Where did you get the TWRP? Can you give me the link?
I want to install magisk and enable camera2 api so I can install gcam
Click to expand...
Click to collapse
You don't need trwp to install magisk. You can use magisk manager to patch the stock boot image, then adb push to install the patch boot image to your device. There are plenty of tutorials on how to do this here on XDA.

Cyb3rk1ll said:
You don't need trwp to install magisk. You can use magisk manager to patch the stock boot image, then adb push to install the patch boot image to your device. There are plenty of tutorials on how to do this here on XDA.
Click to expand...
Click to collapse
Yeah i know, but haven't try it myself and I usually use twrp to install it. That's why I lack the confidence to do so ?.
Have you tried rooting your zenfone 5q?

DumDumBumBum said:
Yeah i know, but haven't try it myself and I usually use twrp to install it. That's why I lack the confidence to do so ?.
Have you tried rooting your zenfone 5q?
Click to expand...
Click to collapse
I have not yet, I'm waiting for an unlock method that is reversable, I have however used magisk to patch boot images on some of my other devices that don't have twrp available.
---------- Post added at 05:50 PM ---------- Previous post was at 05:44 PM ----------
DumDumBumBum said:
Yeah i know, but haven't try it myself and I usually use twrp to install it. That's why I lack the confidence to do so ?.
Have you tried rooting your zenfone 5q?
Click to expand...
Click to collapse
Which part makes you uncomfortable? Is it patching the image or using adb push?

But bro, feels like you posted in the wrong forum. This forum is for Zenfone 5 x86 A500CG/ A501CG.

mzj4213 said:
But bro, feels like you posted in the wrong forum. This forum is for Zenfone 5 x86 A500CG/ A501CG.
Click to expand...
Click to collapse
Is there a dedicated forum for the 5q? I've looked on the app and haven't found one. I find threads for it in all kinds of places though.

Cyb3rk1ll said:
Is there a dedicated forum for the 5q? I've looked on the app and haven't found one. I find threads for it in all kinds of places though.
Click to expand...
Click to collapse
Well yeah somehow, maybe you can make a request to the moderators? Or maybe use some kind of tag temporarily?

DumDumBumBum said:
Where did you get the TWRP? Can you give me the link?
I want to install magisk and enable camera2 api so I can install gcam
Click to expand...
Click to collapse
Soon after making my original post I downloaded the stock rom from the Asus support page the same place I got the bootloader unlock app from.
After flashing I got brave or stupid and found a site that had a TWRP for the zc600kl so i said what the hell and installed the TWRP idk if I can link it here but I'm sure they'll get rid of it if it isn't.
https://mega.nz/#!OuJHnaJR!aUTwAtRcEukqOi6XMh-FKsYcM22gHEzC35YajMkSOns
It turned out to be TWRP 3.2.3.0 and works perfectly. only issue I had was during the Magisk installation, twrp couldn't mount anything. turns out it was showing my internal storage as 0 but it was an extremely easy fix! all I had to do was just change the phones storage file system from it's original to another then immediately back to the original file system (can't remember specifics) within the twrp advanced menu I think, but it worked just fine and my internal storage read the correct size. Found fix on YouTube easily.
I installed magisk flawlessly then installed xposed seamless now have the best of both and everything is working great phone is stable no issues at all I'm very pleased,
Safety net check fails but IDC I don't need it.
Ridiculously easy root I love this phone ?? oh and now I have iOS 11 Emojis lol
Hope this helps all you Zenfone 5Q zc600kl owners out there.
If anyone wishes to know anything else PM me I'll try to help.
???

Shakez619 said:
Soon after making my original post I downloaded the stock rom from the Asus support page the same place I got the bootloader unlock app from.
After flashing I got brave or stupid and found a site that had a TWRP for the zc600kl so i said what the hell and installed the TWRP idk if I can link it here but I'm sure they'll get rid of it if it isn't.
https://mega.nz/#!OuJHnaJR!aUTwAtRcEukqOi6XMh-FKsYcM22gHEzC35YajMkSOns
It turned out to be TWRP 3.2.3.0 and works perfectly. only issue I had was during the Magisk installation, twrp couldn't mount anything. turns out it was showing my internal storage as 0 but it was an extremely easy fix! all I had to do was just change the phones storage file system from it's original to another then immediately back to the original file system (can't remember specifics) within the twrp advanced menu I think, but it worked just fine and my internal storage read the correct size. Found fix on YouTube easily.
I installed magisk flawlessly then installed xposed seamless now have the best of both and everything is working great phone is stable no issues at all I'm very pleased,
Safety net check fails but IDC I don't need it.
Ridiculously easy root I love this phone ? oh and now I have iOS 11 Emojis lol
Hope this helps all you Zenfone 5Q zc600kl owners out there.
If anyone wishes to know anything else PM me I'll try to help.
Click to expand...
Click to collapse
Just tried with this and it says it's too big when flashing and fails ZF5Q ZC600kl (X017D)

slayerking said:
Just tried with this and it says it's too big when flashing and fails ZF5Q ZC600kl (X017D)
Click to expand...
Click to collapse
Same here, seems as though this twrp is for the X017DA which has a much larger size recovery compared to the regular X017D which has a stock recovery size and flash limit of 32mb. I tried for hours to get a ported twrp running on the X017D to no avail. Can someone help?

PizzaG said:
Same here, seems as though this twrp is for the X017DA which has a much larger size recovery compared to the regular X017D which has a stock recovery size and flash limit of 32mb. I tried for hours to get a ported twrp running on the X017D to no avail. Can someone help?
Click to expand...
Click to collapse
I just finished attempting to flash this recovery using my X017DA and I'm getting the file size too large error as well.
There are NUMEROUS people stating that they've rooted this phone and I'd SURE as hell love to know how.
I unlocked the bootloader at this point for nothing, and it's rather irritating.
It's bad enough I have spotty service on this phone because apparently, it doesn't support band 12 (which is crap) and ASUS refuses to cert it for VOLTE
I love the cameras, and functionality of this phone, and for the price the specs are GREAT, but this WILL be the last and only ASUS phone I'll purchase. Hell, I might even ban their computer components from my home after this fiasco.

Question!
Did you use the official Asus unlock app?

dracconus said:
I just finished attempting to flash this recovery using my X017DA and I'm getting the file size too large error as well.
There are NUMEROUS people stating that they've rooted this phone and I'd SURE as hell love to know how.
I unlocked the bootloader at this point for nothing, and it's rather irritating.
It's bad enough I have spotty service on this phone because apparently, it doesn't support band 12 (which is crap) and ASUS refuses to cert it for VOLTE
I love the cameras, and functionality of this phone, and for the price the specs are GREAT, but this WILL be the last and only ASUS phone I'll purchase. Hell, I might even ban their computer components from my home after this fiasco.
Click to expand...
Click to collapse
please tell me how you unlock the bootloader of zc600kl x017d ?
I m trying for months to do so but fail, as the official unlock apk tool is not working.
Please tell me how you unlock the bootloader on ([email protected])
I shall be very thankfull to you for this

Cyb3rk1ll said:
Few quick questions. Did you use the official Asus unlock app? Can you post a link to the twrp download?
Click to expand...
Click to collapse
oye me puedes ayudar para descargar una twrp en asus x017da me puedes dar un link

[help] XT1921-1 root

Hello all,
I was wondering if there has been any development / root process for the E5 Play XT1921-1?
Thanks

smeogle said:
Hello all,
I was wondering if there has been any development / root process for the E5 Play XT1921-1?
Thanks
Click to expand...
Click to collapse
If you have unlocked your bootloader, you should be able to use @CodyF86's TWRP and root method from this thread. https://forum.xda-developers.com/mo...very-twrp-moto-e-5-play-james-t3796323/page23
The xt1921-1 appears to be the unbranded variant of xt1921-5.

MotoJunkie01 said:
If you have unlocked your bootloader, you should be able to use @CodyF86's TWRP and root method from this thread. https://forum.xda-developers.com/mo...very-twrp-moto-e-5-play-james-t3796323/page23
The xt1921-1 appears to be the unbranded variant of xt1921-5.
Click to expand...
Click to collapse
I will give it a go, thank you for your info!

smeogle said:
I will give it a go, thank you for your info!
Click to expand...
Click to collapse
To play it completely safe, instead of actually flashing TWRP as an initial step, use the boot-only method:
fastboot boot twrp.img
This way, you can ascertain whether the TWRP build functions on your device normally before flashing the /recovery partition.

MotoJunkie01 said:
To play it completely safe, instead of actually flashing TWRP as an initial step, use the boot-only method:
fastboot boot twrp.img
This way, you can ascertain whether the TWRP build functions on your device normally before flashing the /recovery partition.
Click to expand...
Click to collapse
Well, it worked!. I had to flash your stock ROM in TWRP due to it being stuck in a bootloop, but overall, it runs well! I guess the steps outlined for 1921-5 are confirmed to work for XT1921-1. Thank you again for your help!

smeogle said:
Well, it worked!. I had to flash your stock ROM in TWRP due to it being stuck in a bootloop, but overall, it runs well! I guess the steps outlined for 1921-5 are confirmed to work for XT1921-1. Thank you again for your help!
Click to expand...
Click to collapse
Very glad you tried and confirmed this. I'll add the info to my stock ROM thread regarding the intercompatability between these two devices.

MotoJunkie01 said:
Very glad you tried and confirmed this. I'll add the info to my stock ROM thread regarding the intercompatability between these two devices.
Click to expand...
Click to collapse
Upon further use, there is some stability issues. When I navigate to Settings -> System -> About Phone -> Hardware Information, the popup 'Motorola Settings has stopped' appears. Additionally, camera doesn't launch.

smeogle said:
Upon further use, there is some stability issues. When I navigate to Settings -> System -> About Phone -> Hardware Information, the popup 'Motorola Settings has stopped' appears. Additionally, camera doesn't launch.
Click to expand...
Click to collapse
Interesting. That would appear to indicate some minor differences between the two devices in terms of firmware configurations. Try this, using the factory firmware package for your device, flash the /boot and /oem partitions only (since the camera drivers are located in /boot). Then boot into TWRP recovery and flash Magisk (or a no-verity script) in order to disable dm-verity and for root patching. Wipe the cache and Dalvik and reboot system.
If that doesn't do the trick, do a clean firmware install and do a TWRP dump of your system image and /boot partition. Upload them to a host like Google Drive, send me a link, and I'll build you a TWRP flashable stock ROM specifically for xt1921-1.

MotoJunkie01 said:
Interesting. That would appear to indicate some minor differences between the two devices in terms of firmware configurations. Try this, using the factory firmware package for your device, flash the /boot and /oem partitions only (since the camera drivers are located in /boot). Then boot into TWRP recovery and flash Magisk (or a no-verity script) in order to disable dm-verity and for root patching. Wipe the cache and Dalvik and reboot system.
If that doesn't do the trick, do a clean firmware install and do a TWRP dump of your system image and /boot partition. Upload them to a host like Google Drive, send me a link, and I'll build you a TWRP flashable stock ROM specifically for xt1921-1.
Click to expand...
Click to collapse
After following the flash boot and oem steps, it got caught in a bootloop. Once that occurred, I wiped and reflashed your stock rom (followed by Magisk). Once it booted again, the previously mentioned instability (camera and hardware settings) have disappeared. Good job!

smeogle said:
After following the flash boot and oem steps, it got caught in a bootloop. Once that occurred, I wiped and reflashed your stock rom (followed by Magisk). Once it booted again, the previously mentioned instability (camera and hardware settings) have disappeared. Good job!
Click to expand...
Click to collapse
Give me a TWRP backup of your system image and boot partition and I'll make a TWRP flashable stock ROM for the XT1921-1.
Thanks for testing. I'll add the intercompatability info to my stock ROM and firmware threads.

Unlocking Bootloader on XT1921-1
Just wondering how you unlocked your Bootloader??? Motorola site states it is unlockable?
---------- Post added at 09:57 PM ---------- Previous post was at 09:46 PM ----------
smeogle said:
Well, it worked!. I had to flash your stock ROM in TWRP due to it being stuck in a bootloop, but overall, it runs well! I guess the steps outlined for 1921-5 are confirmed to work for XT1921-1. Thank you again for your help!
Click to expand...
Click to collapse
Just wondering how you unlocked your Bootloader??? Motorola site states it is unlockable?

dcluvsme said:
Just wondering how you unlocked your Bootloader??? Motorola site states it is unlockable?
---------- Post added at 09:57 PM ---------- Previous post was at 09:46 PM ----------
Just wondering how you unlocked your Bootloader??? Motorola site states it is unlockable?
Click to expand...
Click to collapse
I followed the guide the on the following Motorola website:
https://motorola-global-portal.custhelp.com/app/standalone/bootloader/unlock-your-device-a

Thanks
smeogle said:
I followed the guide the on the following Motorola website:
Click to expand...
Click to collapse
Using Linux, I was refused, did the exact same thing in Windows,and it worked.
Who knows.
Thanks for the tip.

dcluvsme said:
Using Linux, I was refused, did the exact same thing in Windows,and it worked.
Who knows.
Thanks for the tip.
Click to expand...
Click to collapse
When you tried in Linux, what do you mean it did not work? I performed mine with Linux Mint. Did you get any specific error? How did you install adb and fastboot?

smeogle said:
When you tried in Linux, what do you mean it did not work? I performed mine with Linux Mint. Did you get any specific error? How did you install adb and fastboot?
Click to expand...
Click to collapse
I used Puppy Xenial,but I also have Linux Mint. I am sure it was an error on my part. No worries.

smeogle said:
Well, it worked!. I had to flash your stock ROM in TWRP due to it being stuck in a bootloop, but overall, it runs well! I guess the steps outlined for 1921-5 are confirmed to work for XT1921-1. Thank you again for your help!
Click to expand...
Click to collapse
can u please help me i think im stuck in the same boat you were in

MotoJunkie01 said:
If you have unlocked your bootloader, you should be able to use @CodyF86's TWRP and root method from this thread. https://forum.xda-developers.com/mo...very-twrp-moto-e-5-play-james-t3796323/page23
The xt1921-1 appears to be the unbranded variant of xt1921-5.
Click to expand...
Click to collapse
is there a way to do it without twerp? my phone is in a boot loop i installed the wrong rom i think i cant find the correct one for this phone.

Hotspot help

I have a pixel 4 xl unlocked, the issue I am facing is when I try to add apn with dun it will not allow me to save I am on at&t is there a way to work around this? I would like not to root until it's got twrp to flash aosp ROMs .
Thanks for any help

kushman said:
I have a pixel 4 xl unlocked, the issue I am facing is when I try to add apn with dun it will not allow me to save I am on at&t is there a way to work around this? I would like not to root until it's got twrp to flash aosp ROMs .
Thanks for any help
Click to expand...
Click to collapse
You are going to have to root to do the tethering bypass. Also, so you know user bigbiff has made TWRP work on our phones and it's completely functional in it's 5th beta now. It works great and you can flash any AOSP ROM with it.

1dopewrx05 said:
You are going to have to root to do the tethering bypass. Also, so you know user bigbiff has made TWRP work on our phones and it's completely functional in it's 5th beta now. It works great and you can flash any AOSP ROM with it.
Click to expand...
Click to collapse
Thanks I'm going to have to try although like I said in the twrp thread when he told me they are all side load idk what that mean to me that means put a apk on and card and install it lol this Is a bit more to it th b good ole htc 10 days. I also noticed there isn't really good instructions for people to root and "side load" ROMs. Either detailed steps in writing or detailed steps in a video on how to do all don't exist

kushman said:
Thanks I'm going to have to try although like I said in the twrp thread when he told me they are all side load idk what that mean to me that means put a apk on and card and install it lol this Is a bit more to it th b good ole htc 10 days. I also noticed there isn't really good instructions for people to root and "side load" ROMs. Either detailed steps in writing or detailed steps in a video on how to do all don't exist
Click to expand...
Click to collapse
Okay, so the "traditional" sideloading we used to have to do for a custom rom is extremely easy and only requires super basic ADB comprehension. As for installing a custom rom now, you don't even need to worry about sideloading, all you need to do is boot the TWRP.img that I told you about and once in TWRP you can install the custom rom right through there with just a tap or two.
I think you may be confused with how to get into TWRP, you Don't need to side load the TWRP image, you just need to fastboot boot the image. Ex: boot your device into the bootloader with the command: adb reboot bootloader
Then from bootloader use command: fastboot boot "location of TWRP.img you download on your computer"
Once running that command, you'll be in TWRP and can continue to flashing a custom rom.

General [IMG] Boot + magisk patched boot images

Hi, I have decided to gather boot images and magisk patched images to one thread for now. I will try to edit this thread to be up-to-date. You can let me know what could you want next or if anything is wrong etc.
Stock boot.img files (direct links): ​
EU NE2213_11_A.12​
Stock boot.img - link
EU NE2213_11_A.10​
Stock boot.img - link
​Magisk patched boot.img are here a file that can be downloaded (I am using magisk canary usually, but in Magisk, you can change the channel from the canary to stable etc.) - names as the versions come. ​
Below this there are those magisk patched files which you just flash (or boot and then flash directly from the Magisk app) via fastboot ​

Reserved

Don't you need to patch vendor_boot.img as well like OnePlus 9 pro ?

HessNL said:
Don't you need to patch vendor_boot.img as well like OnePlus 9 pro ?
Click to expand...
Click to collapse
Apparently not. I have patched that stock boot via magisk, then via fastboot boot <patchedimage.img> booted (and also tested if it actually boots) and when it booted, via magisk app I did "Direct install (recommended)", rebooted and done.

Oh okay you had a temporary boot we that's good to know well it works that's the most important thing ain't it

Noob question I been on locked bootloader for years so haven't been in the root scene, but I have US model NE2215 I'm guessing I need to wait for the firmware to be available to get the boot img? Did I just got my phone too early? Already oem unlocked now just waiting for twrp and root info. I always wanted a OnePlus phone because the community is big, but doesn't seem like much people upgraded from 9 pro.

HessNL said:
Oh okay you had a temporary boot we that's good to know well it works that's the most important thing ain't it
Click to expand...
Click to collapse
Yes, because this is probably and currently the most secure option to root it as we haven't got twrp available yet.
BuBbLeFIZzY said:
Noob question I been on locked bootloader for years so haven't been in the root scene, but I have US model NE2215 I'm guessing I need to wait for the firmware to be available to get the boot img? Did I just got my phone too early? Already oem unlocked now just waiting for twrp and root info. I always wanted a OnePlus phone because the community is big, but doesn't seem like much people upgraded from 9 pro.
Click to expand...
Click to collapse
That's not that you have it early. The phone itself is early in spite of rooting and doing things like rooting, custom recoveries, ROMs etc. I currently can't find boot img for your model, but once I do, I will post it here for you with patched one.

Thank you kouzelnik3 for this thread !
I was going to dl original firmware and patch it myself but found your thread in time with all ready to flash
Rooted OP10 pro done, now i can't wait to see some TWRP and roms in the future

fozzy056 said:
Thank you kouzelnik3 for this thread !
I was going to dl original firmware and patch it myself but found your thread in time with all ready to flash
Rooted OP10 pro done, now i can't wait to see some TWRP and roms in the future
Click to expand...
Click to collapse
You're really welcome, I wanted to unite those currently quite hard rooting stuff!
And yes, I can't wait to see twrp too!

Is there a known stock boot.img of the NE2215_11_A.10? I assume I shouldn't use the 2213_11_A.10.

GeekMcLeod said:
Is there a known stock boot.img of the NE2215_11_A.10? I assume I shouldn't use the 2213_11_A.10.
Click to expand...
Click to collapse
Not yet unfortunately. Or I don't know about it yet. :/

kouzelnik3 said:
Not yet unfortunately. Or I don't know about it yet. :/
Click to expand...
Click to collapse
Yeah.. I googled a lot last night once I got my phone trying to find it to root it. I need me that extra bit of customization.
Is there a way I can get it from my phone?

what am i doing wrong here rooted for 7+ years and some reason can't get this working.
Just moved over from ColorOS to Oxygen - when i try to flash the boot.img (patched one) all i get is this

Johnstan725 said:
what am i doing wrong here rooted for 7+ years and some reason can't get this working.
Just moved over from ColorOS to Oxygen - when i try to flash the boot.img (patched one) all i get is this
Click to expand...
Click to collapse
Ignore me but for anyone else that tries looks like i had to reboot bootloader and flash the img via bootloader...
thought it's normally flashed via fastboot?! weird phone

Johnstan725 said:
Ignore me but for anyone else that tries looks like i had to reboot bootloader and flash the img via bootloader...
thought it's normally flashed via fastboot?! weird phone
Click to expand...
Click to collapse
You should wipe the phone and start all over or else you won't be able to take ota updates. Never flash the patched boot image since you bypass the magisk backup feature. You have to wait for the full update package to update if you flash the boot. Ppl have previously had update issues after flashing.

g96818 said:
You should wipe the phone and start all over or else you won't be able to take ota updates. Never flash the patched boot image since you bypass the magisk backup feature. You have to wait for the full update package to update if you flash the boot. Ppl have previously had update issues after flashing.
Click to expand...
Click to collapse
Wiped the phone already, what difference would it make if i remove root or flash stock boot then flash ota and reflash boot?

Johnstan725 said:
Wiped the phone already, what difference would it make if i remove root or flash stock boot then flash ota and reflash boot?
Click to expand...
Click to collapse
Not sure what else magisk does during the backup process, but doing what you’re describing didn’t work for users on 8T and they usually ended up soft bricking. Everyone who flashed it vice installing from magisk app had to wait for op to post the full rom or for someone to post a repacked fastboot rom to update.
You do what you need to do, I’m just giving you some experience and recommendations since you just wiped and flashed the boot.

g96818 said:
Not sure what else magisk does during the backup process, but doing what you’re describing didn’t work for users on 8T and they usually ended up soft bricking. Everyone who flashed it vice installing from magisk app had to wait for op to post the full rom or for someone to post a repacked fastboot rom to update.
You do what you need to do, I’m just giving you some experience and recommendations since you just wiped and flashed the boot.
Click to expand...
Click to collapse
Interesting.
I moved over from ColorOS to oxygen OS, wiped the device then just booted a patched boot img, and installed direct.
I assume I flash ota and go onto magisk and do inactive slot? Where does the issue lie what method should I have gone down?

Johnstan725 said:
Interesting.
I moved over from ColorOS to oxygen OS, wiped the device then just booted a patched boot img, and installed direct.
I assume I flash ota and go onto magisk and do inactive slot? Where does the issue lie what method should I have gone down?
Click to expand...
Click to collapse
Hmmm. Well you should be fine if you patched the boot and let magisk do the install. I only suggested wiping since you said you flashed the img from the bootloader.
You might run into the same problem I have with the 9RT. I too upgraded from color to oos and couldn’t update at all, even though I rooted from the magisk app. I had to wait for someone to make a fastboot rom. I had no problems updating color following my method, but not oos after switching. Hopefully that’s not the case for you.