Related
ATTENTION!
You MUST read all the guide BEFORE doing it, if you do it without reading all of it first you may ends up bricking your phone!
Prerequisites:
Asus ZE500KL (may work on ZE500KG, but haven't tested, do it on your own risk) on Marshmallow, NOT LOLLIPOP!
Also, it must have fully booted AT LEAST one time, otherwise, you'll soft-brick it.
If your phone is not on Marshmallow, you can use THIS guide insteadDownload and put the unlocker zip file and the SuperSu zip file in the phone
How To:
1 - Install adb and fastboot driver (follow THIS guide)
Now you can connect the phone to your computer2 - Reboot in fastboot mode with one of the following method:
a -Volume Up while booting upb -With adb, after enabling USB debugging in developer settings, using:
Code:
adb reboot bootloader
Now that you are in bootloader, you have to boot in TWRP,
download THIS recovery (is the twrp one) and boot in to it, using this command:
IMPORTANT: DON'T FLASH IT OR YOU WILL GET BOOTLOOP!!!
Code:
fastboot boot TWRP-x-x-x-x.img
(Obviusly the recovery name must be the one you downloaded)
IMPORTANT: DON'T FLASH IT OR YOU WILL GET BOOTLOOP!!!
It should automaticaly enter in recovery.
Now you MUST flash FIRST ZE500KL_BootloaderUnlock.zip, otherwise you'll brick your phone
Btw, the recovery will mount your phone's memory, so you can put now the files in the phone, if you forgot to do it before
AFTER you installed the unlocker zip, you can install the SuperSu zip
When the install is complete, clear the cache and reboot your phone, now you can enjoy your root!
Downloads:
Latest @MiauLightouch TWRP - 3.0.0.2 Mirror
Latest SuperSu zip - 2.65 Mirror
Bootloader Unlocker (from @MiauLightouch original post) - Mirror
Credits:
@MiauLightouch for pretty much everything
@LuK1337 , @luca020400 and everyone on #titandev for being awesome
So.. I'm thinking of buying a ZE500KL and I've been doing some reading on this phone on the forums.. did it really just get unlocked like yesterday? does that mean custom roms from now on?
MuzgontarAco said:
So.. I'm thinking of buying a ZE500KL and I've been doing some reading on this phone on the forums.. did it really just get unlocked like yesterday? does that mean custom roms from now on?
Click to expand...
Click to collapse
I would recommend Z00L/T, you will get cm13, official unlock at least.
You Say " May Work On ZE500KG" Is ze500kg already receive Marshmallow Update?
MiauLightouch said:
I would recommend Z00L/T, you will get cm13, official unlock at least.
Click to expand...
Click to collapse
thanks for the advice but my choices are poor with about 5 phones in this price range with this one looking waay better.. getting it via contract so yeah..
How to install supersu zip? Tia.
Working! Have you tried to flash Viper4Android? On lollipop this will break Call recording and FM Radio, maybe this will not be a problem on MM?
Seanjhon027 said:
How to install supersu zip? Tia.
Click to expand...
Click to collapse
Inside TWRP there is a big "Install" button, press it and select the zip
what is the meaning of booted
mohamedelkholy said:
what is the meaning of booted
Click to expand...
Click to collapse
context?
until you saw the lock screen, that's what "booted".
stuck waiting for device
C:\Users\Clynt\Desktop\Android M>adb reboot bootloader
C:\Users\Clynt\Desktop\Android M>fastboot boot twrp.img
< waiting for device >
Ok I don't know where I get wrong but I got this error.
Img file name is ok because I renamed it.
Drivers were installed already.
Developers mode is enabled already.
Windows 7 64bit
Tried rooting this using lollipop and everything went well.
thanks!
UPDATE: i got it. it has something to do with the drivers.
Without opening the bootloader.
Notice. I have not tried it.
http://www.asus-zenfone.com/2016/05/how-to-root-asus-zenfone-2-laser-ze50kl-marshmallow.html?m=1
thanl you man i have rooted my zenfone 2 laser
Thanks very much for this guide and your work.
Can I install the new update v13.10.7.1 when I opened bootloader.
The twrp recovery is temporary or permanent? If permanent how to go back to stock recovery? Tia
thanks
thks TS
now my phone its rooted
Muminek111 said:
Without opening the bootloader.
Notice. I have not tried it.
No... when trace a perequisite link Given..
you really need to unlock bootloader first
wulfe13 said:
The twrp recovery is temporary or permanent? If permanent how to go back to stock recovery? Tia
Click to expand...
Click to collapse
i think isnt permanent, this step is needed to boot into twrp then flashing a unlockBL..
to make permanent.. the command must "fastboot flash recovery twrp_X.X.X.X.img"
but make sure to unlock bootloader first...
CMIIW
Click to expand...
Click to collapse
Is it me or everytime I reboot the device after rooted, it's going back to unrooted?
Root is a success tho, great job, OP!
Edit: okay, not every reboot, but after several reboots, then it went back unrooted
Hi,
I found it on web and i don't really remember from where i got it but its not my work so all credits to whom so ever it may be concerned.
##Please proceed at your own risk, i am note responsible for any damage to your device or any data loss.
Below is a zip file that will root nearly any version of MIUI on Redmi Note 4g.
Tried and tested on miui 7 & 8.
##Need Someone to test on MIUI 6##
Its a superuser flashable zip rooting file for Redmi Note 4g only.
https://drive.google.com/file/d/0B8CWcCKLg4hraUZXMDVLc050TWM/view?usp=drivesdk
**To Root**
Please make a backup of your data before starting to root your device.
Recommended: Do not connect to any internet network such as wifi,gprs,3G/4G...
to avoid update searching issue till the process is over.
1)Download the above rooting .zip file from the above URL and save it into your internal/external SD Card(Recommend in your internal SD Card).
2) Now open Updater App of MIUI and open options.(3 dots in the right at the top)
3) Now choose the option "Choose Update Package". Now the file manager will get open.
4)Locate the .zip file that you downloaded in the file manager and click on it(For MIUI 8: After clicking on the file it gets selected and then click on ok).
5)Wait for the process to get over. Phone will restart and you will see the superuser app installed now.
6)Now open the app and a pop up will come to update su.Click on Ok and in that select Normal/CWM or TWRP as per the recovery you have installed on your device.
7) That's it now your device is successful rooted.
##Note: Its not a native root.
**To UNROOT**
1)Just Open The SuperSU App
2)Click on Settings. Then, click On Full Unroot option.
3)Then Click Continue, and the unrooting will begin.
4)After a reboot, your phone should be clean of the root.
I used KINGRoot. Just download the APK and run. So far no any issue seen
Schuan said:
I used KINGRoot. Just download the APK and run. So far no any issue seen
Click to expand...
Click to collapse
Ya its an alternative method to it but using kingroot my experience is not good.
It couldn't not help to fully unroot my device also if i needed to use super su it gave me problem.
If it's working for u then its well and good but if u like super su more then u can use the above method.
I m using note 4g used king root. it did not root. I m using latest firmware. what shoud i do please help
Vivek Kantesaria said:
I m using note 4g used king root. it did not root. I m using latest firmware. what shoud i do please help
Click to expand...
Click to collapse
Give a try to the method that i have mentioned...
Sry for late reply
nrathod3 said:
Give a try to the method that i have mentioned...
Sry for late reply
Click to expand...
Click to collapse
Okay brother not an issue
Vivek Kantesaria said:
Okay brother not an issue
Click to expand...
Click to collapse
Did it work for you?
nrathod3 said:
Did it work for you?
Click to expand...
Click to collapse
Yes then i flashed twrp and RR :angel:
Vivek Kantesaria said:
Yes then i flashed twrp and RR :angel:
Click to expand...
Click to collapse
Cool
iT may cause your phone no reaction while connecting to The Pc if you use The latest supersu version on supersu official website. I prefer phh's superuser . I rooted my mido perfectly With it.
I tried the above method but I accidentally selected twrp method when su asked to update.
Now the phone stuck at MI boot loop screen I can only access to fast boot mode but can't enter recovery mode.
So any help ?
Is the file size 2.81 MB only?
Phone stuck/ Damaged
Im also having same problem.
After flashing Su, it asked for reboot. When i reboot, it is stuck in MI logo and not restarting. i observed this for more than 10 hrs. When i tried to start with recovery, again it is stuck is FASTBOOT screen and not progressing. My phone is not usable now. Please help
aadison said:
I tried the above method but I accidentally selected twrp method when su asked to update.
Now the phone stuck at MI boot loop screen I can only access to fast boot mode but can't enter recovery mode.
So any help ?
Click to expand...
Click to collapse
How can i root my Xiaomi Redmi Note 4G with PC. Only fastboot mode is showing in my phone, no other option is coming.
Hi,
anyone tried to flash TWRP 3.1.0? https://dl.twrp.me/vienna/
Maybe succesfully rooted the P9+ with it?
Regards
Flashed on B360 but still unable to enter TWRP Recovery, just stuck on bootscreen "Your device has been unlocked..."
//Niklas
Any update for successful root ?????
FYI.... I'm on L29C636B362 and have full root, however I'm struggling to exchange the emojis to iOS 10.2 as I can't stand the android ones...
I used the EVA TWRP 3.1.0 and it works fine with the latest phh SuperUser ZIP and binary.
//Niklas
nikjensie said:
FYI.... I'm on L29C636B362 and have full root, however I'm struggling to exchange the emojis to iOS 10.2 as I can't stand the android ones...
I used the EVA TWRP 3.1.0 and it works fine with the latest phh SuperUser ZIP and binary.
//Niklas
Click to expand...
Click to collapse
Hello nikjensie, a favor I want to ask if you can post the procedure for granting that you made and the files you've used, because I on a P9 Plus VIE-L09C02334 have failed to have the root conn new TWRP, despite having tried to use latest SuperSu files, from 2.78 to 2.79. Thanks in advance and hope you can help me. See you soon
I hope that you understand their English translation.
Grlschia said:
Hello nikjensie, a favor I want to ask if you can post the procedure for granting that you made and the files you've used, because I on a P9 Plus VIE-L09C02334 have failed to have the root conn new TWRP, despite having tried to use latest SuperSu files, from 2.78 to 2.79. Thanks in advance and hope you can help me. See you soon
I hope that you understand their English translation.
Click to expand...
Click to collapse
Did you try to root using phh SuperSu?
cmexec said:
Did you try to root using phh SuperSu?
Click to expand...
Click to collapse
No, can you give me the link or if there is any thread on the forums. I did the phone unlocked, loaded the new TWRP and then I tried to load the various SuperSu, with negative results. In fact, failing to have the root are returned to the previous version of Andorid (Marshmallow).
Grlschia said:
No, can you give me the link or if there is any thread on the forums. I did the phone unlocked, loaded the new TWRP and then I tried to load the various SuperSu, with negative results. In fact, failing to have the root are returned to the previous version of Andorid (Marshmallow).
Click to expand...
Click to collapse
Wich TWRP did you used? im stuck in "your device is booting"
matagatoz said:
Wich TWRP did you used? im stuck in "your device is booting"
Click to expand...
Click to collapse
That downloaded from this link:
This https://dl.twrp.me/vienna/twrp-3.1.0-0-vienna.img.html of this link has blocked me too the phone. I reverted to another version that I downloaded through a link I always found on this forum, that I can not remember.
P.S.: Sorry if you copied it is not, just I find the load. Thank you
L29C636B362 wont boot to TWRP recovery...
matagatoz said:
Wich TWRP did you used? im stuck in "your device is booting"
Click to expand...
Click to collapse
A previous poster said he used TWRP 3.1.0 for the P9 (EVA). I just tried that version, and although it seems to flash ok via fastboot, a boot into recovery does not advance past the "Your device is booting now..." screen. :crying:
cmexec said:
A previous poster said he used TWRP 3.1.0 for the P9 (EVA). I just tried that version, and although it seems to flash ok via fastboot, a boot into recovery does not advance past the "Your device is booting now..." screen. :crying:
Click to expand...
Click to collapse
Go with the phone in bootloader and through the tool Universal_Fastboot_And_Adb_Tool loads the file that you find in this mega folder: mega:#fm/n5JlDJbT I shared. See that the language is Chinese and English.
You can also install it with command-ADB Fastboot if you back better.
Grlschia said:
Go with the phone in bootloader and through the tool Universal_Fastboot_And_Adb_Tool loads the file that you find in this mega folder: mega:#fm/n5JlDJbT I shared. See that the language is Chinese and English.
You can also install it with command-ADB Fastboot if you back better.
Click to expand...
Click to collapse
im unable to open that mega folder can you re-share it ?
Try it: pan.baidu.com/s/1nvqbYNR
All credits to [email protected]
matagatoz said:
im unable to open that mega folder can you re-share it ?
Click to expand...
Click to collapse
Excuse me, I have some problem for sharing, I fix just put the link to download.
jvelasco said:
Try it: pan.baidu.com/s/1nvqbYNR
Click to expand...
Click to collapse
Okay I installed the TWRP from this package and was able to boot into TWRP (3.03) recovery and change the language to english. I tested a nandroid backup and all seems to work fine. I was not able to install phh superuser. The install fails with: "Updater process ended with Error 1". I guess I am missing a crucial step in rooting Nougat on the VIE-L29C636 ROM?
Hello, I too with the new TWRP I managed to back up and restore her, but miss the fact that we can have the rott. I tried to install the various 'SuperSu', 'phh superuser' and not least 'Magisk', not get anything good. Now I left clean, no bootloader unlocked and no TWRP. but its original recovery, waiting for some of the many programmers and modders are able to find a winning combination in order to have the root on our phone. One reason for the only backup I am using the app 'Backup Huawei' already installed it does its job very well, in qunto also saves the settings that we do. See you soon and good navigation and use with this amazing phone.
cmexec said:
Okay I installed the TWRP from this package and was able to boot into TWRP (3.03) recovery and change the language to english. I tested a nandroid backup and all seems to work fine. I was not able to install phh superuser. The install fails with: "Updater process ended with Error 1". I guess I am missing a crucial step in rooting Nougat on the VIE-L29C636 ROM?
Click to expand...
Click to collapse
Maybe try this: pan.baidu.com/s/1i5qQfm1
Original post: club.huawei.com/thread-12226302-1-1.html
All credits to [email protected]
cmexec said:
Okay I installed the TWRP from this package and was able to boot into TWRP (3.03) recovery and change the language to english. I tested a nandroid backup and all seems to work fine. I was not able to install phh superuser. The install fails with: "Updater process ended with Error 1". I guess I am missing a crucial step in rooting Nougat on the VIE-L29C636 ROM?
Click to expand...
Click to collapse
You need to use the phh version r275...
//Nik
jvelasco said:
Maybe try this: pan.baidu.com/s/1i5qQfm1
Original post: club.huawei.com/thread-12226302-1-1.html
All credits to [email protected]
Click to expand...
Click to collapse
Thank you for the response. I did use the same TWRP version from the linked site. It's actually v3.0.3. It installs and works fine; to the extent that I was able to successfully complete a nandroid backup in TWRP. However, when I tried to install phh Superuser r2.75 it fails with message "Updater process ended with Error: 1". Is it possible that I needed to uninstall/remove the previous root (SuperSu) that existed before I upgraded from MM to Nougat?
-Paul
cmexec said:
Thank you for the response. I did use the same TWRP version from the linked site. It's actually v3.0.3. It installs and works fine; to the extent that I was able to successfully complete a nandroid backup in TWRP. However, when I tried to install phh Superuser r2.75 it fails with message "Updater process ended with Error: 1". Is it possible that I needed to uninstall/remove the previous root (SuperSu) that existed before I upgraded from MM to Nougat?
-Paul
Click to expand...
Click to collapse
root can be achieved with systemless root. i think the version is 2.79 found in the p9 forums. i rooted my p9+ with the latest nougat earlier today. twrp is now 3.1.0.
Hey guys,
My younger brother had TWRP installed on his OP3. Yesterday he applied OTA and his phone got bricked. I unbricked it from MSMtool method (Qualcom Driver). It got unbricked and i have stock rom now however phone is stuck at android is upgrading (45 minutes). I tried restarting it and now it is in boot loop. i tried to flash latest OxygenOS from adb sideload and it got bricked again. Can anyone tell me what to do now or what is wrong with the device.
abdullah.ahsan11 said:
Hey guys,
My younger brother had TWRP installed on his OP3. Yesterday he applied OTA and his phone got bricked. I unbricked it from MSMtool method (Qualcom Driver). It got unbricked and i have stock rom now however phone is stuck at android is upgrading (45 minutes). I tried restarting it and now it is in boot loop. i tried to flash latest OxygenOS from adb sideload and it got bricked again. Can anyone tell me what to do now or what is wrong with the device.
Click to expand...
Click to collapse
You have TWRP installed? Use Method 2 of the unbrick guide. Now you want to wipe every partition then adb push your rom (not sideload) and manually flash it. Make sure you are on the latest Bluspark twrp.
Puddi_Puddin said:
You have TWRP installed? Use Method 2 of the unbrick guide. Now you want to wipe every partition then adb push your rom (not sideload) and manually flash it. Make sure you are on the latest Bluspark twrp.
Click to expand...
Click to collapse
I am using method 2, the OS gets stuck on bootloop that's why i tried to sideload later
I don't have a working recovery, all i can get is stock recovery, how can i install twrp?
I've tried flashing (fastboot flash recovery recovery.img) it but it is not working
abdullah.ahsan11 said:
I am using method 2, the OS gets stuck on bootloop that's why i tried to sideload later
I don't have a working recovery, all i can get is stock recovery, how can i install twrp?
I've tried flashing (fastboot flash recovery recovery.img) it but it is not working
Click to expand...
Click to collapse
Why is it not working? Does it give an error or something?
Puddi_Puddin said:
Why is it not working? Does it give an error or something?
Click to expand...
Click to collapse
Yes, it says flashing partition not allowed.
I suppose it is because usb debugging is off.
abdullah.ahsan11 said:
Yes, it says flashing partition not allowed.
I suppose it is because usb debugging is off.
Click to expand...
Click to collapse
Nah, In windows, go to Device Manager. How does your device show up? It has to do with wrong drivers.
Puddi_Puddin said:
Nah, In windows, go to Device Manager. How does your device show up? It has to do with wrong drivers.
Click to expand...
Click to collapse
Yes It shows up correctly.
abdullah.ahsan11 said:
Yes It shows up correctly.
Click to expand...
Click to collapse
What is correctly? What does it say? You might want to try different ADB drivers. You should be able to always flash In fastboot..
abdullah.ahsan11 said:
Yes, it says flashing partition not allowed.
I suppose it is because usb debugging is off.
Click to expand...
Click to collapse
Check again the bootloader to be unlocked. Use the tool for that, is it on OP3 forum, then retry to get a stock rom up before anything else (TWRP, custom rom, etc)
Sent from my OnePlus3 using XDA Labs
follow this instruction -
1- go into twrp and wipe everything even internal and formate it .
2- unistall all adb driver and oneplus driver also .. then clean tmp file from window
3rd- install latest adb+ oneplus 3 driver ..again restrat ..
4th-boot in fastboot mod and lock your bootloader
5th-flast latest build of oxygen stock recovery from fastboot
6th than again wipe or factory reset the device via stock recovery
7th open stock recoery than flash latest build of oxygen os via sideload
8th reboot the device and setup quikly
9th-unlock bootloader, flash bluespark recovery , flash rom, flash supersu ..
10th play with device
Hi, I recently switched to OOS 5.0 .I got Error 7 in twrp, So I forced to boot with Stock Recovery,
Now I want to install Custom Recovery TWRP and Root the Device with Magistk..
I'm a noob in sideload kinda things,, and I'm on Windows 10 in PC.
How could i go around to root my device!?!?
Regards
vettayyan said:
Hi, I recently switched to OOS 5.0 .I got Error 7 in twrp, So I forced to boot with Stock Recovery,
Now I want to install Custom Recovery TWRP and Root the Device with Magistk..
I'm a noob in sideload kinda things,, and I'm on Windows 10 in PC.
How could i go around to root my device!?!?
Regards
Click to expand...
Click to collapse
By searching and not creating a thread just for your question answered ~1000 times.
Please use the search function before posting. Read the Forum Rules if you're a newbie.
Is there any other way to install or Flash TWRP other than Fastboot mode???
vettayyan said:
Is there any other way to install or Flash TWRP other than Fastboot mode???
Click to expand...
Click to collapse
Not without ROOT, still even that has already been answered to many times.
vettayyan said:
Is there any other way to install or Flash TWRP other than Fastboot mode???
Click to expand...
Click to collapse
Flashing TWRP by fastboot is a single command. I think you are making the solution more complicated than the problem. Downloading TWRP, putting it in the right place, and flashing with fastboot can all be done in about 3 minutes.
vettayyan said:
Hi, I recently switched to OOS 5.0 .I got Error 7 in twrp, So I forced to boot with Stock Recovery,
Now I want to install Custom Recovery TWRP and Root the Device with Magistk..
I'm a noob in sideload kinda things,, and I'm on Windows 10 in PC.
How could i go around to root my device!?!?
Regards
Click to expand...
Click to collapse
Since u had TWRP before, it should not be difficult for u to flash oreo TWRP with fastboot commend. U r even able to flash back to stock recovery. Your question is not making sense. ?