Related
Hello Friends ! I tried to install CyanogenMod for Atrix HD, but I forgot to unlock the Bootloader and now my phone shows me the message FASTBOOT can not load the Boot. Someone can help me with this problem to retrieve my phone ? Thank you very much for the prompt help from everyone .
Reinitialize fastboot and rsdlite to stock and start over again with unlocking BL and rooting the phone by flashing a recovery.
has anybody found a solution to this problem
i mean unlock FRP in fastboot mode
i can only enter Fastboot mode but cant flash anything due to the FRP Lock
and rescue Mode is absolutly useless
Huawei eRecovery fails
i feel like the Mate S has been out so long and since a lot of people have this problem
somebody must have found a solution by now
ladres said:
has anybody found a solution to this problem
i mean unlock FRP in fastboot mode
i can only enter Fastboot mode but cant flash anything due to the FRP Lock
and rescue Mode is absolutly useless
Huawei eRecovery fails
i feel like the Mate S has been out so long and since a lot of people have this problem
somebody must have found a solution by now
Click to expand...
Click to collapse
one thread is enough. if there was a way to solve this problem, you would find it in one of the top threads.
im desperate
ladres said:
im desperate
Click to expand...
Click to collapse
you f.ed up. live with it. if no one can help you in on thread, you don´t have to open another one. this is just annoying and people like me who want to help just get pissed because of that.
if your device:
- is FRP locked
- can´t boot into android
- can´t flash stock update.app via vol+/vol-/power
- has no twrp flashed
all together, you have to send it to an repair service.
dear,can i help you?excuse me for my english ,i am italian man and i have your same problem...my phone is in bootloop logo huawei and i have frp locked ..command via fastboot not work for flash boot.IMG and recovery because my phone had twrp recovery..i have contact dcunlocker via chat and i speak with valdemaras...it take to me software huaweiphonewriter.exe free in beta test and i reflash boot recovery and userdata before in fastboot mode and after i reflash total firmware in upgrade mode with same firmware...ask him in chat..tell me know..bye...my phone is restart !!
frisko76 said:
dear,can i help you?excuse me for my english ,i am italian man and i have your same problem...my phone is in bootloop logo huawei and i have frp locked ..command via fastboot not work for flash boot.IMG and recovery because my phone had twrp recovery..i have contact dcunlocker via chat and i speak with valdemaras...it take to me software huaweiphonewriter.exe free in beta test and i reflash boot recovery and userdata before in fastboot mode and after i reflash total firmware in upgrade mode with same firmware...ask him in chat..tell me know..bye...my phone is restart !!
Click to expand...
Click to collapse
I have the same problem and i'm French noob on XDA, so can you tell me were i can downlod huaweiphonewriter.exe? i don't find it on google / XDA.
THx
hello..you can contact there from contact support. https://www.dc-unlocker.com/contacts....livello chat..and speak with valdemaras..he take to you software with password for unlock device..OK?..i not have payment for unlock..try you..
---------- Post added at 01:12 PM ---------- Previous post was at 01:06 PM ----------
i tried that tool
cost me like 30 bucks but no use
ist wothless
help me please
Hi, how are you ? I have the same problems with my mate 's , you would find a solution because since I lost hope ... I tried everything , flash via adb command and copying the file update.app to the root of the sd card. I have a FRP locked and my eom desactivate ( my phone is bricked ) thx for your response
hi,i need this version ale-l21c113b130,i have search on internet but,i can found,any idea????
try here, http://huaweip8lite.blogspot.co.uk/ just use google to translate & scroll down for rom list
gordonyoung53 said:
try here, http://huaweip8lite.blogspot.co.uk/ just use google to translate & scroll down for rom list
Click to expand...
Click to collapse
Thanks for your reply,i will try with version ale-l21v100r001c432b136a,to see if can i unbrick my phone
cristi.blidariu said:
hi,i need this version ale-l21c113b130,i have search on internet but,i can found,any idea????
Click to expand...
Click to collapse
To unbrick your phone the fastest way is to unlock bootloader which takes you 10-15 mins, and fastboot flash any rom. Easy peasy.
pilililo2 said:
To unbrick your phone the fastest way is to unlock bootloader which takes you 10-15 mins, and fastboot flash any rom. Easy peasy.
Click to expand...
Click to collapse
i have bootloader unlock,i have try many firmware to flash via adb,but when i type fastboot reboot only led blink red for 2 sec and then green for 10 sec,after that the phone shutdown,if i try to turn on same thing,led blink red the green,i dont have any clue what is the problem
To flash a firmware you must use Fastboot commands NOT adb. ADB commands are for when android is already booted. First flash boot.img, recovery.img... etc and then reboot your phone. Its should be working or at least booting. You should check out the mega-thread recently posted in the general section. It might help you.
pilililo2 said:
To flash a firmware you must use Fastboot commands NOT adb. ADB commands are for when android is already booted. First flash boot.img, recovery.img... etc and then reboot your phone. Its should be working or at least booting. You should check out the mega-thread recently posted in the general section. It might help you.
Click to expand...
Click to collapse
here what i use
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot reboot(i have try all version based on single sim and dual sim,the same error,when is try to boot the led indicator blink red then green and is shutdown,if i try to turn on same error led indicator blink red then green,the only option that i have is just to putt the phone in fastboot/rescue mod,so i don't know what is the problem )
Wow ive never heard of that :/ Have you tried flashing recovery before cust? Thats what I usually do. And I also use mfastboot instead of fastboot.
pilililo2 said:
Wow ive never heard of that :/ Have you tried flashing recovery before cust? Thats what I usually do. And I also use mfastboot instead of fastboot.
Click to expand...
Click to collapse
is not my phone,and to be honest with you i have upgrade and downgrade my phone(ale-l21c432b170) many times with out problem,but with this one i dont have any idea what is the problem,so this is his history,it was on ale-l21c113b130 single sim and my friend try to make dual sim by flash version b41c>>b46b>>b052,at the end she will end up with balong error,so his restart phone and from there the phone wont boot up,not even in recovery,so what is the problem????
I have balong bug in my phone and it doesnt really do anything, just a wrong build.prop but phone works perfectly, im on 565 single sim. Im sorry but a really have no idea on what is happening to your friends phone since ive never had that error. Maybe you could try talking to some more experienced users such as Sokkoban to see if he can help you. Sorry
pilililo2 said:
I have balong bug in my phone and it doesnt really do anything, just a wrong build.prop but phone works perfectly, im on 565 single sim. Im sorry but a really have no idea on what is happening to your friends phone since ive never had that error. Maybe you could try talking to some more experienced users such as Sokkoban to see if he can help you. Sorry
Click to expand...
Click to collapse
k,thanks for your reply
pilililo2 said:
I have balong bug in my phone and it doesnt really do anything, just a wrong build.prop but phone works perfectly, im on 565 single sim. Im sorry but a really have no idea on what is happening to your friends phone since ive never had that error. Maybe you could try talking to some more experienced users such as Sokkoban to see if he can help you. Sorry
Click to expand...
Click to collapse
Balong bug -> make sure your 1 on the right location or 2 install the vendor file from your build (vendor MM should do)
cristi.blidariu said:
is not my phone,and to be honest with you i have upgrade and downgrade my phone(ale-l21c432b170) many times with out problem,but with this one i dont have any idea what is the problem,so this is his history,it was on ale-l21c113b130 single sim and my friend try to make dual sim by flash version b41c>>b46b>>b052,at the end she will end up with balong error,so his restart phone and from there the phone wont boot up,not even in recovery,so what is the problem????
Click to expand...
Click to collapse
charge battery. check if bootloader is unlocked correctly ( connect device to pc -> hold volume down while powering up)
open console and type
Code:
fastboot oem get-bootinfo
you should get this
Code:
...
(bootloader) unlocked
OKAY [ -0.000s]
finished. total time: -0.000s
if that's the case...
install Twrp 3.0.2
boot into twrp (volume down and volume up while powering on)
wipe everything (dalvik/cache/data/system/internal)
unbrick.
to make everything easier here is a thread.
take those files. it's all prepared (just click once )
also sorry for the noob explaining. you probarly are wellkown with android but it's a custom by now
---------- Post added at 19:19 ---------- Previous post was at 18:59 ----------
btw your problem is that you flashed the custom.img before the recovery it should be in this order.
boot.img
recovery.img
cust.img
system.img
Lordbannakaffalatta said:
Balong bug -> make sure your 1 on the right location or 2 install the vendor file from your build (vendor MM should do)
charge battery. check if bootloader is unlocked correctly ( connect device to pc -> hold volume down while powering up)
open console and type
Code:
fastboot oem get-bootinfo
you should get this
Code:
...
(bootloader) unlocked
OKAY [ -0.000s]
finished. total time: -0.000s
if that's the case...
install Twrp 3.0.2
boot into twrp (volume down and volume up while powering on)
wipe everything (dalvik/cache/data/system/internal)
unbrick.
to make everything easier here is a thread.
take those files. it's all prepared (just click once )
also sorry for the noob explaining. you probarly are wellkown with android but it's a custom by now
---------- Post added at 19:19 ---------- Previous post was at 18:59 ----------
btw your problem is that you flashed the custom.img before the recovery it should be in this order.
boot.img
recovery.img
cust.img
system.img
Click to expand...
Click to collapse
i have try with many firmware(extract files from update.app)but,none was work,every time the same error,I think it might be a problem with the partition,or maybe if i can find someone with version c113b130 and try to flash boot an recovery i will have a chance
cristi.blidariu said:
i have try with many firmware(extract files from update.app)but,none was work,every time the same error,I think it might be a problem with the partition,or maybe if i can find someone with version c113b130 and try to flash boot an recovery i will have a chance
Click to expand...
Click to collapse
it goes the same way.
as i told you try installing twrp first wipe everything and then flash it but do it in the order i gave you.
first boot.img
second recovery.img
third cust.img
fourth system.img
this problem occured before. (cant find the thread anymore) but it should work.
and the way is see it you have nothing to lose at this point so
I also told him that. Usually when I flash a rom I also flash recovery before custom, but for no reason at all haha didnt know it could cause a bootloop if done cust before recovery :/
pilililo2 said:
I also told him that. Usually when I flash a rom I also flash recovery before custom, but for no reason at all haha didnt know it could cause a bootloop if done cust before recovery :/
Click to expand...
Click to collapse
K,thanks for the point,it no mater wich order i flash files,the problem is the boot partition wich meen that i am not able to boot in recovery(not even in stock revcovery)i have try to wipe data by using command fastboot -w and press enter but he gave me command not alowed
Sent from my ALE-L21 using XDA-Developers mobile app
pilililo2 said:
I also told him that. Usually when I flash a rom I also flash recovery before custom, but for no reason at all haha didnt know it could cause a bootloop if done cust before recovery :/
Click to expand...
Click to collapse
Yeah i'm not sure eather but they use to hammer this into us that it become an OCD thing for me
and it wwas the only thing i could see what was wrong.
cristi.blidariu said:
K,thanks for the point,it no mater wich order i flash files,the problem is the boot partition wich meen that i am not able to boot in recovery(not even in stock revcovery)i have try to wipe data by using command fastboot -w and press enter but he gave me command not alowed
Sent from my ALE-L21 using XDA-Developers mobile app
Click to expand...
Click to collapse
weird that's mostly the case when your bootloader is locked. altough it says PHONE unlocked" it isn't always the case. what do you get when you type
fastboot oem get-bootinfo
could you post it?
rip? http://forum.xda-developers.com/showthread.php?t=2456665
it's with the P6 i know but... those are the same symptones
Lordbannakaffalatta said:
Yeah i'm not sure eather but they use to hammer this into us that it become an OCD thing for me
and it wwas the only thing i could see what was wrong.
weird that's mostly the case when your bootloader is locked. altough it says PHONE unlocked" it isn't always the case. what do you get when you type
fastboot oem get-bootinfo
could you post it?
rip? http://forum.xda-developers.com/showthread.php?t=2456665
it's with the P6 i know but... those are the same symptones
Click to expand...
Click to collapse
i run command fastboot oem get-bootinfo and show bootloader unlock
Think I did the title pretty well, I can only access fastboot (Before you say anything I've already tried this guide:http://forum.xda-developers.com/hua...ow-to-unbrick-huawei-p8-failed-t3260704/page1) all it gets me is the screen to light up (black) that's it. At this point I have no clue how to bring it back, any useful tips or ideas would always be appreciated. Thanks.
EDIT: It would be helpful if anyone knew a way to unlock the bootloader through fastboot
EDIT: nvm unlocked the bootloader through adb
EDIT:Installed TWRP through FASTBOOT
EDIT: Had the future rom downloaded, installed through SD card. DEVICE BOOTS.
EDIT: Tried dload method, went back to square 1 (Device would only backlit screen on boot, bootloader locked) Repeated steps and used the Huawei P9 Updater 2.0 by Hajuuk (Godbless) IT WORKS. Currently on C185B170 will update to B180 and from there to Android N. IF anyone has a similar problem feel free to ask.
kyle_2103 said:
Think I did the title pretty well, I can only access fastboot (Before you say anything I've already tried this guide:http://forum.xda-developers.com/hua...ow-to-unbrick-huawei-p8-failed-t3260704/page1) all it gets me is the screen to light up (black) that's it. At this point I have no clue how to bring it back, any useful tips or ideas would always be appreciated. Thanks.
EDIT: It would be helpful if anyone knew a way to unlock the bootloader through fastboot
EDIT: nvm unlocked the bootloader through adb
EDIT:Installed TWRP through FASTBOOT
EDIT: Had the future rom downloaded, installed through SD card. DEVICE BOOTS.
EDIT: Tried dload method, went back to square 1 (Device would only backlit screen on boot, bootloader locked) Repeated steps and used the Huawei P9 Updater 2.0 by Hajuuk (Godbless) IT WORKS. Currently on C185B170 will update to B180 and from there to Android N. IF anyone has a similar problem feel free to ask.
Click to expand...
Click to collapse
Hi, I have problem. I have two Huawei P9. One is L19 and the other is L09.
My L19 is the C900
My L09 I do not remember what it is ... the problem is that it is no system, it only turns on fastboot recovery mode. I've tried combo keys with dload but it does not work or does not recognize. By Hisuite says that the model is not supported. Finally I tried the Firmware Update program by hajuuk https://forum.xda-developers.com/p9-...dater-t3435878 I used several firmwares inside the L09 option but in the middle of the installation it gives error.
I need to find a way to enable the OEM so I can flash boot.img, recovery.img and system.img because I can not flash anything at the momento because it gives the Not Allowed command.
The status is Bootloader locked and FRP locked.
I do not know what to do, I have no ideas.
ChaseRxx said:
Hi, I have problem. I have two Huawei P9. One is L19 and the other is L09.
My L19 is the C900
My L09 I do not remember what it is ... the problem is that it is no system, it only turns on fastboot recovery mode. I've tried combo keys with dload but it does not work or does not recognize. By Hisuite says that the model is not supported. Finally I tried the Firmware Update program by hajuuk https://forum.xda-developers.com/p9-...dater-t3435878 I used several firmwares inside the L09 option but in the middle of the installation it gives error.
I need to find a way to enable the OEM so I can flash boot.img, recovery.img and system.img because I can not flash anything at the momento because it gives the Not Allowed command.
The status is Bootloader locked and FRP locked.
I do not know what to do, I have no ideas.
Click to expand...
Click to collapse
I think there is not solution for this problem. We have to wait. (I have the same problem but in Al00 running Al19 rom)
How do you check for FRP lock on a Huawei phone just curious.
ChaseRxx said:
Hi, I have problem. I have two Huawei P9. One is L19 and the other is L09.
My L19 is the C900
My L09 I do not remember what it is ... the problem is that it is no system, it only turns on fastboot recovery mode. I've tried combo keys with dload but it does not work or does not recognize. By Hisuite says that the model is not supported. Finally I tried the Firmware Update program by hajuuk https://forum.xda-developers.com/p9-...dater-t3435878 I used several firmwares inside the L09 option but in the middle of the installation it gives error.
I need to find a way to enable the OEM so I can flash boot.img, recovery.img and system.img because I can not flash anything at the momento because it gives the Not Allowed command.
The status is Bootloader locked and FRP locked.
I do not know what to do, I have no ideas.
Click to expand...
Click to collapse
Okay to unlock the bootloader, go into fastboot and plug in the USB to your computer, then by either using SRK tool or adb you need to flash this command: fastboot oem unlock (insert bootloader code) *don't put brackets* if you are unaware of your bootloader code then I cannot help you, however if you do know it, then once you unlocked the bootloader flash system.img and stuff to see if that works for you
kyle_2103 said:
Okay to unlock the bootloader, go into fastboot and plug in the USB to your computer, then by either using SRK tool or adb you need to flash this command: fastboot oem unlock (insert bootloader code) *don't put brackets* if you are unaware of your bootloader code then I cannot help you, however if you do know it, then once you unlocked the bootloader flash system.img and stuff to see if that works for you
Click to expand...
Click to collapse
Already tried this, I have the unlocking password but can't unlock BL through fastboot oem unlock (code) because the OEM Unlock is disabled.
ChaseRxx said:
Already tried this, I have the unlocking password but can't unlock BL through fastboot oem unlock (code) because the OEM Unlock is disabled.
Click to expand...
Click to collapse
That's weird, OEM unlcok was also switched off in developer options for me, yet this still worked, can you tell me exactly what the error code says?
kyle_2103 said:
That's weird, OEM unlcok was also switched off in developer options for me, yet this still worked, can you tell me exactly what the error code says?
Click to expand...
Click to collapse
I've tried some command in fastboot mode but there's always an error: Remote: command not allowed.
I can't do anything with fastboot mode
1. Try to force update with Power Button + Min Vol Button + Max Vol Button, liked you said this isn't working try to do the button combination with the phone connect it to the PC; in my case some times dload din't works after I connected the phone to the computer.
2. Other thing, something happend if you turn of the phone and leave Max Vol Button pressed, you should be entering to eRecovery.
3. Remember that sometimes enter in eRecovery mode requires to the phone be turn off otherwise you can't access to Recovery. So if this is the case follow bullet #2 and them #1.
PD: OFC I'm assuming you already have the dload folder with an compatible version of stock ROM on your SDCARD. If you don't have any version tries this one: https://forum.xda-developers.com/p9...dload-file-p9-eva-l09-b136-t3382818?nocache=1
Hope I helped you, I already bricked twice my P9 corrupting System Table Partitions.
Jeremy Molina.
---------- Post added at 10:38 AM ---------- Previous post was at 10:36 AM ----------
kyle_2103 said:
That's weird, OEM unlcok was also switched off in developer options for me, yet this still worked, can you tell me exactly what the error code says?
Click to expand...
Click to collapse
If you did the change of Unlock OEM before the bricked in an previous authorized computer you will still have rights for, otherwise new Android Security features is going to rejected the request.
Exacly
Dload/ no network
ChaseRxx said:
Exacly
Click to expand...
Click to collapse
Hi guys! Im new sorry if posted in wrong place/topic, I did dload method as here https://forum.xda-developers.com/p9/development/stock-rom-dload-file-p9-eva-l09-b136-t3382818 to debrand my L09 Vodafone to stock software and now I end up in EVA-C900B136 and my sim card/network is not working anymmore I had download the software package is in the above post and did force flash.
Many thanks for help!!!
kyle_2103 said:
Think I did the title pretty well, I can only access fastboot (Before you say anything I've already tried this guide:http://forum.xda-developers.com/hua...ow-to-unbrick-huawei-p8-failed-t3260704/page1) all it gets me is the screen to light up (black) that's it. At this point I have no clue how to bring it back, any useful tips or ideas would always be appreciated. Thanks.
EDIT: It would be helpful if anyone knew a way to unlock the bootloader through fastboot
EDIT: nvm unlocked the bootloader through adb
EDIT:Installed TWRP through FASTBOOT
EDIT: Had the future rom downloaded, installed through SD card. DEVICE BOOTS.
EDIT: Tried dload method, went back to square 1 (Device would only backlit screen on boot, bootloader locked) Repeated steps and used the Huawei P9 Updater 2.0 by Hajuuk (Godbless) IT WORKS. Currently on C185B170 will update to B180 and from there to Android N. IF anyone has a similar problem feel free to ask.
Click to expand...
Click to collapse
How did you unlock the bootloader through adb ? I'm in the same position as you put I have a P9lite.
dondrog said:
How did you unlock the bootloader through adb ? I'm in the same position as you put I have a P9lite.
Click to expand...
Click to collapse
fastboot oem unlock (followed by bootloader code)
kyle_2103 said:
fastboot oem unlock (followed by bootloader code)
Click to expand...
Click to collapse
Hello gays i install nougat 7
install with TWRP after install my phone is no keybord no all problems and i can`t active oem waht i do all command
remote not allowed coomand and i try to install all veriosn but still problem please help me
i install
EVA-L19C432B322-update
and my phone 6369C-EVA L19
my mistake please help me
i try to swoftware sim but swoftware failed
--
incompatibility with current version please download the correct update package
i upload vedio on youtube see please https://www.youtube.com/watch?v=V2yH...ature=youtu.be
sry for my bad engilsh
Any help would be greatly appreciated
I have a P9 L09, i have unlocked the bootloader, flashed TWRP recovery, and started flashing some roms. I have succesfully flashed a cyanogenmod, and it booted properly, but when it started it asked me for a password which i did not know, so i google searched and found out that it is a common issue and i need to wipe data from recovery. I tryed that but it did not work it says failed, and nothing works in the wipe advanced section, beside system. And also in the custom recovery it says that the internal storage has 0MB ! I was able to put other custom roms on the SDcard and flash them, they booted but every single one asks for the password.. I then tryed to install stock rom with the dload method, but it crashes and 40% , and i tryied the System Recovery option in HiSuite and it says it is not compatible with my device. Any help would be greatly appreciated! Thank you!
kyle_2103 said:
fastboot oem unlock (followed by bootloader code)
Click to expand...
Click to collapse
Hello. I have the same problem. I have my unlock code but in fastboot, adb command says it failed. Sorry for bad english. What can i do?
FAILED: REMOTE COMMAND NOT ALLOWED FINISHED.
Same problem on my honor &x locked bootloader and bricked. unlocking the oem like you said above does not work
Hi I have a problem with my honor 5c so I deleted everything from the phone because I wanted to install custom rom but that didnt worked out and now I dont have system on it and twrp recovery was also deleted I unlocked bootloader but every command i type in fastboot is not working even one for oem status but if I type fastboot devices it shows my device and if I go to huawei erecovery and try to recover it it says getting package info failed and when battery discharge and I put it on charger it says
error mode
attention!
Please update system again.
Error!
Func NO: 10(boot image
Error NO: 2(load image)
I am really pissed off and I dont know what to do someone HELP ME PLEASE.:crying:
Simply u can fix
Preview:
Today I faced this issue,and successfully solved,
Shutdown mobile ,then connect to PC and quickly press volume down button automatically goes to bootloader mode , manually flash system,cust,recovery and boot img
---------- Post added at 01:30 PM ---------- Previous post was at 01:26 PM ----------
Then use Dload method u can fix this issue,
Today I post some posts according to this issue on Facebook,
Honor 5c group india
But as I wrote if I go to fastboot/bootloader I cant type any command on every command it says "command not allowed" even the one for oem status and I cant turn on usb debbuging or oem unlock because I dont have os.
Hey @leoleo333, I did exactly the same thing that you did and had exactly the same problem as a result. I considered myself fairly knowledgeable about Android and Huawei/honor mobiles... I tried everything you can think of and spent months trawling the internet for a solution and was unable to fix it. I posted here on XDA and even the most knowledgeable members were unable to help. You should do a search of my XDA posts relating to this.
That said,I am using my honor 5C right now!:laugh: I didn't realise that my warranty was 24 months,I thought it was 12 months. Hence why I spent so many months trying to fix the problem myself. By chance I found out I still had warranty and sent it to the repair centre. It was so easy and straight forward and in a matter of days they had fixed and returned my beloved mobile. I even had a slight defect on the screen as a result of falling over and they even repaired that free of charge!
All I can say is that I hope and pray you have warranty :fingers-crossed: or you can kiss your mobile goodbye. Sorry. Please do let me know if you fix it yourself though, I'd be really interested to know where I went wrong. Thx.
leoleo333 said:
But as I wrote if I go to fastboot/bootloader I cant type any command on every command it says "command not allowed" even the one for oem status and I cant turn on usb debbuging or oem unlock because I dont have os.
Click to expand...
Click to collapse
Is opend erecovery mode
I used Huawei multi tool,
For installing stock recovery,
If you success to flashing stock recovery
Then use dload method
shankarjdhv125 said:
Is opend erecovery mode
I used Huawei multi tool,
For installing stock recovery,
If you success to flashing stock recovery
Then use dload method
Click to expand...
Click to collapse
He has already explained that....!
It doesnt matter if you use multi tool or manual commands...You cant flash stock recovery because every fastboot command comes back 'remote command not allowed' and this is because the os will not boot so you cant enable oem unlock and usb debugging in order to unlock bootloader and have full use of adb/fastboot.
The dload method will install the update.app, it will even go to 100% and say success but it will NOT boot the OS. It will stay stuck on boot animation until the battery dies. Search my posts here on XDA (stuck on boot logo).
I think it has to do with the partitions or the filesystem...I'm afraid i cant help you with that @leoleo333
@leoleo333 , you mention that your bootloader is unlocked...I think you should double check that. if it was unlocked you would be able to use fastboot commands and flash whatever you want. I have read many posts on XDA where members report that their bootloader is unlocked and the device says as much but in fact that is not the case! Let me know how things go. Good Luck.
I managed to fix it couple of days ago with dload method, it actually worked for me i would try it before but i did not had micro sd card
Nice, Im really glad that the dload method was all it took to fix it. Take it easy now.
Bro try this ,added screenshots ,I fixed same issue
iantechie1979 said:
He has already explained that....!
It doesnt matter if you use multi tool or manual commands...You cant flash stock recovery because every fastboot command comes back 'remote command not allowed' and this is because the os will not boot so you cant enable oem unlock and usb debugging in order to unlock bootloader and have full use of adb/fastboot.
The dload method will install the update.app, it will even go to 100% and say success but it will NOT boot the OS. It will stay stuck on boot animation until the battery dies. Search my posts here on XDA (stuck on boot logo).
I think it has to do with the partitions or the filesystem...I'm afraid i cant help you with that @leoleo333
Click to expand...
Click to collapse
Same issue fixed by me
Software install failed but successfully booted