Related
I flashed the newest version of viper4android on my nexus 6 and try to install it but it doesn't install. What am I doing wrong?
awsumatt said:
I flashed the newest version of viper4android on my nexus 6 and try to install it but it doesn't install. What am I doing wrong?
Click to expand...
Click to collapse
do you have the SELinuxMode app set to permissive?
simms22 said:
do you have the SELinuxMode app set to permissive?
Click to expand...
Click to collapse
OHHHH Ok I will try that. Sorry that was stupid.
awsumatt said:
OHHHH Ok I will try that. Sorry that was stupid.
Click to expand...
Click to collapse
download the app, set it to permissive, then try again. i think that by default, lollipop doesnt allow modules.
Might also need to install busybox
Sent from my Nexus 6 using XDA Free mobile app
Hi, i have same problem " driver installation failure "
I try to set SELinuxMode app set to permissive ( use SELinuxModeChange app ) , but got same error.
Also i try to reinstall busybox, to unroot/root, try different version of V4A . try to change FX compatible mode but nothig help so far.
My config: Colorfly G708 MTK6592 (octa core) KitKat 4.4.2
Thanks in advance for your Help
lazer88 said:
Hi, i have same problem " driver installation failure "
I try to set SELinuxMode app set to permissive ( use SELinuxModeChange app ) , but got same error.
Also i try to reinstall busybox, to unroot/root, try different version of V4A . try to change FX compatible mode but nothig help so far.
My config: Colorfly G708 MTK6592 (octa core) KitKat 4.4.2
Thanks in advance for your Help
Click to expand...
Click to collapse
Different phone, different OS version. Hard to answer in nexus forum.
rootSU said:
Different phone, different OS version. Hard to answer in nexus forum.
Click to expand...
Click to collapse
Oh, i am sorry i didnt see that is Nexus forum, just see " Viper4Android Driver Installation Failure "
lazer88 said:
Oh, i am sorry i didnt see that is Nexus forum, just see " Viper4Android Driver Installation Failure "
Click to expand...
Click to collapse
One thing though, selinux is a new requirement for viper in lollipop. It was never needed on KitKat so don't waste time there.
rootSU said:
One thing though, selinux is a new requirement for viper in lollipop. It was never needed on KitKat so don't waste time there.
Click to expand...
Click to collapse
Thanks for the note
Update Busybox, disable "MOUNT SPACE SEPARATION" On SuperSU
killerBRs said:
Update Busybox, disable "MOUNT SPACE SEPARATION" On SuperSU
Click to expand...
Click to collapse
you do realize that this thread is over a year old? its a dead thread. theres no point to bring up dead threads.
simms22 said:
you do realize that this thread is over a year old? its a dead thread. theres no point to bring up dead threads.
Click to expand...
Click to collapse
Yu, but no anyone got a Solution for this problem.
killerBRs said:
Yu, but no anyone got a Solution for this problem.
Click to expand...
Click to collapse
sure i do, use a kernel that sets SElinux as permissive or use an app that will do that.
Hi,
I've updated my Oneplus 3 to latest everything: OxygenOS 4.1.0 with Android 7.1.1, and Magisk to 11.6.
I'm using the Viper4Android FX Module from topjohnwu, in the official Magisk repo.
Since then, V4A seems to be ignoring the audio feed, it never processes it.
Code:
Driver Version: 2.5.0.4
NEON Enabled: Yes
Enabled: Yes
Status: Normal
Audio Format: Supported
Processing: No
Sampling Rate: 48000
Whatever the source, or the output, despite triggering the master switch on and off, or even uninstalling the driver, rebooting, installing, rebooting again, it never works.
Any idea on how to solve this?
Cheers
Have the same probleme.
I saw a answer here inthe forum, try to disable master power option
Iaa85 from Brazil with Oneplus 3t
Powered by Aex Rom
iaa85 said:
I saw a answer here inthe forum, try to disable master power option
Iaa85 from Brazil with Oneplus 3t
Powered by Aex Rom
Click to expand...
Click to collapse
Switching "master power" to off, turns v4a, well... off. So no, not a solution I'm afraid :cyclops:
Try this https://forum.xda-developers.com/apps/magisk/module-viper4android-fx-2-5-0-5-t3577058
ahrion said:
Try this https://forum.xda-developers.com/apps/magisk/module-viper4android-fx-2-5-0-5-t3577058
Click to expand...
Click to collapse
changed nothing
But Viper4Android needs SELinux in permissive mode, right?
And on OxygenOS 4.1 it is on Enforcing mode and I'm not able to change it
DanielL. said:
changed nothing
But Viper4Android needs SELinux in permissive mode, right?
And on OxygenOS 4.1 it is on Enforcing mode and I'm not able to change it
Click to expand...
Click to collapse
I am having same issue I'm set to permissive and still it's not processing.. Magisk 11.6 latest Pure Nexus rom.
Castanoff said:
I am having same issue I'm set to permissive and still it's not processing.. Magisk 11.6 latest Pure Nexus rom.
Click to expand...
Click to collapse
Has viper4abdroid ever worked for you the deep buffer remover should fix this issue.
Castanoff said:
I am having same issue I'm set to permissive and still it's not processing.. Magisk 11.6 latest Pure Nexus rom.
Click to expand...
Click to collapse
I've installed FreedomOS (dirty flash from OxygenOS) and now it works
ahrion said:
Has viper4abdroid ever worked for you the deep buffer remover should fix this issue.
Click to expand...
Click to collapse
Just did a clean flash of rom and Magisk 11.6 and installed the v4a module and apk. Re!Over deep buffer and still not processing.
Fixed using ARIES...
https://forum.xda-developers.com/showpost.php?p=71569390&postcount=24001
Overwrite /magisk/v4a/system/vendor/etc/audio_effects.conf with /magisk/v4a/system/etc/audio_effects.conf, reboot.
laggardkernel said:
Overwrite /magisk/v4a/system/vendor/etc/audio_effects.conf with /magisk/v4a/system/etc/audio_effects.conf, reboot.
Click to expand...
Click to collapse
This is supposed to happen automatically with my audmodlib
laggardkernel said:
Overwrite /magisk/v4a/system/vendor/etc/audio_effects.conf with /magisk/v4a/system/etc/audio_effects.conf, reboot.
Click to expand...
Click to collapse
Ha! Solved... I completely forget about that step. I once read that somewhere.
Thank you very much
laggardkernel said:
Overwrite /magisk/v4a/system/vendor/etc/audio_effects.conf with /magisk/v4a/system/etc/audio_effects.conf, reboot.
Click to expand...
Click to collapse
Same problem after update. This did the trick. Thanks
Sent from my HTC 2PS64 using XDA Labs
laggardkernel said:
Overwrite /magisk/v4a/system/vendor/etc/audio_effects.conf with /magisk/v4a/system/etc/audio_effects.conf, reboot.
Click to expand...
Click to collapse
Ive lost the plot, im using root browser and i still cant find the path listed above... :crying:
Srbija2012 said:
Ive lost the plot, im using root browser and i still cant find the path listed above... :crying:
Click to expand...
Click to collapse
Just go to System folder
laggardkernel said:
Overwrite /magisk/v4a/system/vendor/etc/audio_effects.conf with /magisk/v4a/system/etc/audio_effects.conf, reboot.
Click to expand...
Click to collapse
PERFECT!
Sent from my VS996 using Tapatalk
Wait what ?, how do I install this fix for the not processing problem anyway ?, I tried flashing
2 different zips from the Fix author but I get an install error number 1 on TWRP.
How else am I supposed to do this ??
Thank You
Update : NeverMind, I got it. I've installed the fixes VIA Magisks Under selecting Modules and
flashing the Fix Zip's. One last thing, is there a way for me to delete a posted message in the XDA
Forum ??
Thanks Again.
Srbija2012 said:
Ive lost the plot, im using root browser and i still cant find the path listed above... :crying:
Click to expand...
Click to collapse
i am also unable to find this please help ASAP. but i found this audio file its in the /etc folder.
A reinstall worked for me
For detailed please check Original threads
https://forum.xda-developers.com/xi...porary-gcam-fix-oreo-8-1-roms-simple-t3736541
All credits goes to @Azzkaran for making magisk module
FOR THOSE WHO WANT PERMANENT FIX VIA TWRP READ THIS POST
url]https://forum.xda-developers.com/xi...camera-hdr-lens-blur-mi-t3670386/post75290292[/url]
IGNORE THE MAGISK MODULE JUST FLASH THAT ATTACHED FILE FROM THAT POST
Any question ?
Reply here
Credits:
Thanks to @Azzkaran for creating PERMANENT Fix Gcam module
Redmi 3s thread
Dont use attached file ,just use gdrive link
I cannot delete media codecs, after deleted using root browser, it still exist
andhika_prasetya said:
I cannot delete media codecs, after deleted using root browser, it still exist
Click to expand...
Click to collapse
Use es file manager grant root with magisk
evanlocked said:
Use es file manager grant root with magisk
Click to expand...
Click to collapse
If the module activ yes there will be media.codec.google.video but if the module inactive media.codecs will be gone and you can use gcam
The module its self just like a switch button to turn on and of gcam
Go And Get Permanent Fix Is Up!??
Azzkaran said:
Go And Get Permanent Fix Is Up!??
Click to expand...
Click to collapse
Is there already fixed the issue?
evanlocked said:
Is there already fixed the issue?
Click to expand...
Click to collapse
Permanently Fixed Check Thread For Details
Sent from my [device_name] using XDA-Developers Legacy app
Azzkaran said:
Permanently Fixed Check Thread For Details
Click to expand...
Click to collapse
Thanks man i will update my threads,thanks alot for creating magisk module
evanlocked said:
Thanks man i will update my threads,thanks alot for creating magisk module
Click to expand...
Click to collapse
[emoji3] [emoji3] [emoji3]
Sent from my [device_name] using XDA-Developers Legacy app
Tested on pixel experience rom, it workssss!!! I just flashed the magisk module, because i cannot install other zip (i forgot its name). But it's okay. Thanks a lot dude!
The music still can't be played even if i use the permanent fix.. Why?
Jorday22 said:
The music still can't be played even if i use the permanent fix.. Why?
Click to expand...
Click to collapse
Its recomended to use this patch after clean rom flash
Check if you use temporary fix before permanent fix you should delete temporary fix module first,then use permanent fix only
I've got error when flash the permanent fix on pixelexperience rom by sahroni_al_dika.
apranus said:
I've got error when flash the permanent fix on pixelexperience rom by sahroni_al_dika.
Click to expand...
Click to collapse
Thats a ported rom u can use non rom pixelexperience rom its already there bro flash using magisk
https://forum.xda-developers.com/xi...camera-hdr-lens-blur-mi-t3670386/post75290292 check this for twrp gcam fix
How to update Gcam on android 8.1? My Gcam has low quality, so i want to update it
evanlocked said:
https://forum.xda-developers.com/xi...camera-hdr-lens-blur-mi-t3670386/post75290292 check this for twrp gcam fix
Click to expand...
Click to collapse
Ah, you're the man....
It's fully working now on pixel ROM.
Bye-bye old gcam 3.2
@evanlocked
I am getting "no digest file found" error when I am flashing it over Nitrogen os.
The red error lines say:
Updater process ended with Error: 2
Error installing zip file
Ali_Waris said:
@evanlocked
I am getting "no digest file found" error when I am flashing it over Nitrogen os.
The red error lines say:
Updater process ended with Error: 2
Error installing zip file
Click to expand...
Click to collapse
Which one do you use? Dont use post 1 zip file in twrp its for magisk,
scrool up you can find the zip for twrp gcam fix
Check this post for twrp
Download it make sure its not corrupted
url]https://forum.xda-developers.com/xi...camera-hdr-lens-blur-mi-t3670386/post75290292[/url]
Global Positioning System Fix
Speed up Satellite fix for GPS on Android
Hello guys! I have heard lot of us face gps issues with Android and for this I have found a way to fix this issue easily just follow the steps carefully
This trick is not only to speedup the satelite fixing. Some also found that it increase the reception (strong signal even during cloudy, drizzling, and inside building's window). I am one among them!
Requirements:
1.Rooted Device
2.Magisk manager
3.Patience to read
Steps:
1.download the file given
2.flash the downloaded file in magisk manager!
3.reboot the device
4.Use the app gps status and toolbox and follow the steps
A.Open app> tools> manage A-GPS state>Reset
B.Open app> tools> manage A-GPS state>Download
C.use GPS status to start fixing satellites
5.reboot the device
6.use an app called gps locker from playstore to lock satellites and make a proper connection
Voilla!!!
GPS is fixed for your DROID!
Download:
https://github.com/Trevor-akshay/gps-fix/tree/Magisk
Thanks to http://www.pool.ntp.org/en/ for providing the ntp servers
Hit the thanks if I helped you!
cant flash it
letscook said:
cant flash it
Click to expand...
Click to collapse
What do yu mean cant flash? What does it show?
trevor_akshay said:
What do yu mean cant flash? What does it show?
Click to expand...
Click to collapse
Might have something to do with the fact that the zip that is available through the link in the OP is using a very, very old module template that cannot be installed on any Magisk version past v17...
Didgeridoohan said:
Might have something to do with the fact that the zip that is available through the link in the OP is using a very, very old module template that cannot be installed on any Magisk version past v17...
Click to expand...
Click to collapse
That is most problematic...
trevor_akshay said:
What do yu mean cant flash? What does it show?
Click to expand...
Click to collapse
twrp shows error
Didgeridoohan said:
Might have something to do with the fact that the zip that is available through the link in the OP is using a very, very old module template that cannot be installed on any Magisk version past v17...
Click to expand...
Click to collapse
Na sir. I did testing before posting it in XDA
letscook said:
twrp shows error
Click to expand...
Click to collapse
Wtf do yu mind reading the instructions?
trevor_akshay said:
Na sir. I did testing before posting it in XDA
Click to expand...
Click to collapse
Don't know what your testing entailed, but trust me that it won't work on an up-to-date Magisk installation. One dead giveaway is that it's trying to use the Magisk image, something that was deprecated with Magisk v19.0. And anyone that has been working with Magisk modules for a while can see that the structure and the update-binary is very outdated.
There are also other issues. You're using the REPLACE variable in config.sh wrong. That's for directories, not files.
trevor_akshay said:
Wtf do yu mind reading the instructions?
Click to expand...
Click to collapse
Magisk modules are flashable through TWRP, but because of the above mentioned issues this zip will fail. No need to be rude.
Edit: if you want to get your zip up-to-date you should take a look at the docs:
https://topjohnwu.github.io/Magisk/guides.html
trevor_akshay said:
Wtf do yu mind reading the instructions?
Click to expand...
Click to collapse
sorry flashed in mugisk nd it works now thks
Didgeridoohan said:
Don't know what your testing entailed, but trust me that it won't work on an up-to-date Magisk installation. One dead giveaway is that it's trying to use the Magisk image, something that was deprecated with Magisk v19.0. And anyone that has been working with Magisk modules for a while can see that the structure and the update-binary is very outdated.
There are also other issues. You're using the REPLACE variable in config.sh wrong. That's for directories, not files.
Magisk modules are flashable through TWRP, but because of the above mentioned issues this zip will fail. No need to be rude.
Edit: if you want to get your zip up-to-date you should take a look at the docs:
https://topjohnwu.github.io/Magisk/guides.html
Click to expand...
Click to collapse
Oops i tried with and without and uploaded the wrong one and i fixed it now sar and btw thanks for ya guidelines ..am new to these
I will make sure to verify nd change the update-binary file .
Where is the file.cant find it.
adilrenzu said:
Where is the file.cant find it.
Click to expand...
Click to collapse
Its there in my github. Check desktop site if on droid . Thanks
I flashed from twrp, redmi note 7 pro, pixel experience rom(android11). my gps was fix! thanks alot.
Do this work with exynos (Samsung S10) or only with Qualcomm? I am on Android 11.
Can anyone confirm? Thanks!
Can anyone confirm? Thanks!
FortniteTweaks​
requirements
open magisk manager and go to settings here click on hide magisk manager a popup will open just click ok that's all
what is fortnitetweaks?
fortnitetweaks will enable 60fps in fortnite and will fix getting kicked after jumping from the battle bus
how to install fortnitetweaks?
flash fortnitetweaks in magisk manager and open fortnite it's that easy
does fortnitetweaks generates logs?
yes open any explorer and go to internal storage then find fortnitetweaks.log and open it
source
github
credits
@topjohnwu for magisk
This actually works thanks a lot
Sent from my NX659J using Tapatalk
gokhujee said:
This actually works thanks a lot
Sent from my NX659J using Tapatalk
Click to expand...
Click to collapse
thank you this means a lot to me
I will try this, hope it works, thanks for the tweak. ??
RedLikeSnow said:
I will try this, hope it works, thanks for the tweak. ?
Click to expand...
Click to collapse
hey thank you for your post i'm pretty sure it will work just fine but if it won't work please send me the log
VeRkNxT_lOvE_cUsToM_RoMs said:
hey thank you for your post i'm pretty sure it will work just fine but if it won't work please send me the log
Click to expand...
Click to collapse
Works fine without an issue, just played a round, hope to see some improvements etc. in the future, thanks
RedLikeSnow said:
Works fine without an issue, just played a round, hope to see some improvements etc. in the future, thanks
Click to expand...
Click to collapse
great thank you *hits thanks button* but what do you mean by improvements? sadly i can't tweak that much as the most values will get reset by fortnite
Does this work without having to hide fortnite in magisk? Does it mask usb debugging? I want to try this but don't want to reinstall fortnite without getting a clear idea of how it works. I saw previous posts saying it's working and that's awesome but I would like to know how. Also should I install fortnite first or module? Some info please!
***Edited, I tried the magisk module and it didn't work for me.
Sent from my Pixel 4 XL using XDA Labs
- deleted post lol -
bradical711 said:
Does this work without having to hide fortnite in magisk? Does it mask usb debugging? I want to try this but don't want to reinstall fortnite without getting a clear idea of how it works. I saw previous posts saying it's working and that's awesome but I would like to know how. Also should I install fortnite first or module? Some info please!
***Edited, I tried the magisk module and it didn't work for me.
Click to expand...
Click to collapse
hey please look into your downloads folder and remove the patched boot img from magisk if present!
VeRkNxT_lOvE_cUsToM_RoMs said:
hey please look into your downloads folder and remove the patched boot img from magisk if present!
Click to expand...
Click to collapse
Okay, I did.
Sent from my Pixel 4 XL using XDA Labs
bradical711 said:
Okay, I did.
Click to expand...
Click to collapse
so it works now? lol
VeRkNxT_lOvE_cUsToM_RoMs said:
so it works now? lol
Click to expand...
Click to collapse
Everything but 60 fps. Says no gameusersettings.ini found so unfortunately stuck at 30 fps.
Sent from my Pixel 4 XL using XDA Labs
bradical711 said:
Everything but 60 fps. Says no gameusersettings.ini found so unfortunately stuck at 30 fps.
Click to expand...
Click to collapse
this is very interesting please look at this directory /data/data/com.epicgames.fortnite/files/UE4Game/FortniteGame/FortniteGame/Saved/Config/Android/GameUserSettings.ini if you can't find it contact me on telegram if possible
I am new to this kind of stuff can you give me detailed step by step walkthrough I already have magisk managerr
working thank you