Database Develop

The perfect case

Well I'm still searching for it. So far the best case with the best compromise I have used is the original Samsung case as it coveres all corners and sides, the back is well protected, it is not bulky, only missing bit is the front flap. If only they made one with a front flap then it will be the best case, at least for myself...

owl74 said:
Well I'm still searching for it. So far the best case with the best compromise I have used is the original Samsung case as it coveres all corners and sides, the back is well protected, it is not bulky, only missing bit is the front flap. If only they made one with a front flap then it will be the best case, at least for myself...
Click to expand...
Click to collapse
http://www.ebay.com.au/itm/Flip-Lea...ies&hash=item56504172a3&_uhb=1#ht_1799wt_1372
then buy one of these. flip cover as well as offering decent corner and side protection for the phone. back is completely covered and has a bit of leather for impact absorbing when flap is closed.
from what i've seen, samsung do have their own version of this case coming soon.

I was thinking about these but the magnetic case worries me about Spen function.
I don't use the compass but that may get affected too from what I've read...

http://www.ioffer.com/i/leather-flip-cover-case-for-samsung-n7100-galaxy-note-2-523926617 then this one seems to suit you better, although it doesnt offer as much protection for the top and bottom.
from my experience with 15 different cases on my galaxy note 1, you will never be able to find the perfect case. there will always be a compromise, you just have to figure out for yourself what you're willing to compromise.
for me, i like how flip covers protector the screen, but i hate how flimsy they are, how fast they wear and tear, and how clumsy it can be to use them when you're trying to take photos with the camera.
in the end, i've just stuck with an ebay rugged case with stand for my note 2. its durable enough, adds an acceptable amount of bulk and has an integrated stand. i'll probably change to a different case later, but for now, this is as close to perfect as i'll find for my use.

I have the rock flip case already. It has already started peeling off, and getting discolored after a month. This rock case actually feels nice to touch and offers decent protection too but I really wanted something covering the top and bottom after dropping my phone on concrete, which landed top side first and luckily I was using the samsung case at the time so no damage was done.

http://blog.gsmarena.com/samsung-announces-protective-flip-covers-for-the-note-ii-and-s-iii/ so basically you want something like this?
unless you go for a case with magnetic latch, its not gonna stay closed when you drop your phone on concrete. i just go for rugged cases where the edges are raised above the glass. that way the glass doesnt actually kiss the concrete.

any clear back case with the back curved in same shape as S7 edge ?

all the cases look like they have a flat back
iwant a case that keep the curve on the back

bloodomen2 said:
all the cases look like they have a flat back
iwant a case that keep the curve on the back
Click to expand...
Click to collapse
I am using the Spigen Neo Hybrid Crystal - I don't think it does curve per se, but it really does feel good in the hand and it is so thin - it is almost like not having a case at all. The case itself is soft plastic so it is mallable - and in a way it does sort of conform to the shape of the S7Edge, but I don't want to overstate it - with the metal frame around it, the frame itself will keep the soft plastic from curving in until your hand puts pressure on the case, if you know what I mean. The firmness of The steel (or aluminium) frame around the case will cause the back to be flat - but because the case is soft, when you hold it it will sort of conform with the shape of the phone. I love it - excellent case- I have always prefered Spigen Cases over the others. Really nice look and feel.
The other thing I like about it - is it makes it easier to hold the S7Edge and type or do stuff and not have the holding hand interfer by accidentally touching the edge.
http://www.amazon.com/gp/product/B01AUORACQ?psc=1&redirect=true&ref_=oh_aui_detailpage_o03_s01

mocsab said:
I am using the Spigen New Crystal - I don't think it does curve per se, but it really does feel good in the hand and it is so thin - it is almost like not having a case at all. The case itself is soft plastic so it is mallable - and in a way it does sort of conform to the shape of the S7Edge, but I don't want to overstate it - with the metal frame around it, the frame itself will keep the soft plastic from curving in until your hand puts pressure on the case, if you know what I mean. The firmness of The steel (or aluminium) frame around the case will cause the back to be flat - but because the case is soft, when you hold it it will sort of conform with the shape of the phone. I love it - excellent case- I have always prefered Spigen Cases over the others. Really nice look and feel.
The other thing I like about it - is it makes it easier to hold the S7Edge and type or do stuff and not have the holding hand interfer by accidentally touching the edge.
http://www.amazon.com/gp/product/B01AUORACQ?psc=1&redirect=true&ref_=oh_aui_detailpage_o03_s01
Click to expand...
Click to collapse
does it protect the curved screen enough hows the lip ?
usually buy clear ultra hybrid or ringke fusion both give good protection and clarity for the back
i might also consider UAG they have great cases

Funnily enough, this is what I'm after too. I want a case that has a curve on the back similar to the rear of the phone itself.

mocsab said:
I am using the Spigen Neo Hybrid Crystal - I don't think it does curve per se, but it really does feel good in the hand and it is so thin - it is almost like not having a case at all. The case itself is soft plastic so it is mallable - and in a way it does sort of conform to the shape of the S7Edge, but I don't want to overstate it - with the metal frame around it, the frame itself will keep the soft plastic from curving in until your hand puts pressure on the case, if you know what I mean. The firmness of The steel (or aluminium) frame around the case will cause the back to be flat - but because the case is soft, when you hold it it will sort of conform with the shape of the phone. I love it - excellent case- I have always prefered Spigen Cases over the others. Really nice look and feel.
The other thing I like about it - is it makes it easier to hold the S7Edge and type or do stuff and not have the holding hand interfer by accidentally touching the edge.
http://www.amazon.com/gp/product/B01AUORACQ?psc=1&redirect=true&ref_=oh_aui_detailpage_o03_s01
Click to expand...
Click to collapse
I got a little bit different one than this from Spigen and it fits great, adds some grip, does not leave finger prints and is very slim. I can't really feel the curve, but it does feel great in hand. There is a slight lip at the top and the bottom of the case, so if you lay it on a flat surface the screen does not hit the surface. The side edges are exposed and it does not interfere with the use of the edge functions. I do think if the phone fell just right on the edge sides it could hit the ground where there is no protection. Hopefully they will make a tempered glass screen protector soon that will take care of this.
http://www.amazon.com/Galaxy-Spigen..._UL160_SR160,160_&refRID=1SBDDY7TNKRHYPY7TKEB

bloodomen2 said:
does it protect the curved screen enough hows the lip ?
usually buy clear ultra hybrid or ringke fusion both give good protection and clarity for the back
i might also consider UAG they have great cases
Click to expand...
Click to collapse
I don't believe it offers much protection for the screen - drop the phone screen down and it is likely to break - (depending on how high you drop it and how it lands of course) I think it does offer some decent protection for the phone - the back and the edges - I wish there was a good option for glass screen protectors but I don't think they have perfected that yet for EDGE..for now I am waiting on a pet type screen protector from Skinomi (I think that is how you spell their name).....
---------- Post added at 11:20 AM ---------- Previous post was at 11:15 AM ----------
kxhaz said:
I got a little bit different one than this from Spigen and it fits great, adds some grip, does not leave finger prints and is very slim. I can't really feel the curve, but it does feel great in hand. There is a slight lip at the top and the bottom of the case, so if you lay it on a flat surface the screen does not hit the surface. The side edges are exposed and it does not interfere with the use of the edge functions. I do think if the phone fell just right on the edge sides it could hit the ground where there is no protection. Hopefully they will make a tempered glass screen protector soon that will take care of this.
http://www.amazon.com/Galaxy-Spigen..._UL160_SR160,160_&refRID=1SBDDY7TNKRHYPY7TKEB
Click to expand...
Click to collapse
the one you bought looks identical to the one I bought - may be slightly different - I just realized that my case also has a "lip" at the top and bottom of the phone that keeps the screen from touching when placed on it's face. The only difference between yours and mine that I can see is the aluminum is gun metal grey on mine - looks great on the phone....

I got this but not got phone yet so can't comment.

Sorry this

bloodomen2 said:
all the cases look like they have a flat back
iwant a case that keep the curve on the back
Click to expand...
Click to collapse
I have 15 cases for this phone right now.
The one I have that fits your description is the Spigen Liquid Crystal.
It is clear and has the same rounded back sides as the phone.
http://www.amazon.com/Spigen®-Cryst...sr=8-1&keywords=s7+edge+spigen+liquid+crystal

otterbox has a crystal case as well I have the item reviewed but here is the link to the product http://goo.gl/vO0KLw

Milimbar said:
I have 15 cases for this phone right now.
The one I have that fits your description is the Spigen Liquid Crystal.
It is clear and has the same rounded back sides as the phone.
http://www.amazon.com/Spigen®-Cryst...sr=8-1&keywords=s7+edge+spigen+liquid+crystal
Click to expand...
Click to collapse
the problem with the liquid is that it doesn't provide enough protection for the screen
so i ordered the CLEAR ULTRA HYBRID in the end
now i gotta find some good screen protector..

Bah, I've used the crystal on 3 different phones and they have survived drops and usage just fine.
But I'm not one to buy a nice phone and wrap it up like an ugly mummy either.
Sent from my XT1585 using Tapatalk

bloodomen2 said:
the problem with the liquid is that it doesn't provide enough protection for the screen
so i ordered the CLEAR ULTRA HYBRID in the end
now i gotta find some good screen protector..
Click to expand...
Click to collapse
Both are nice cases, you will be happy with either.

I'll probably get the Samsung clear case. I like to keep the phone thin and not hide it in a case. I know it's a risk as far as protection but I'm very careful with my phone. *knocks on wood* I will get something to put protect my phone when I put it in my golf bag though. lol

Top Rated Case For S7 edge from Amazon Round up Review : Heavy duty , lightweight

Hi , There .
My name is Ben Hoffman , if you are familian with A C forum you will know i am the formed Admin and i was quite good at accessories.
I just joined this forum a couple days ago . So here we go , let us talk about cases .
And the boss of this forum sent me an email , i am so flatted , he is such a nice guy .
Otterbox SYmmeter Case
This is a great case, I got my galaxy s7 edge alot earlier then I expected to, the phone was scheduled to be released on the 11th but I ended up getting it on the 1st of March!! Now to me this was good and bad, the good I HAVE A NEW PHONE YAY!!!, the bad? well...I have no case.... SO luckily AMAZON was there to rescue me from my issue, I purchased this otterbox case, because in the past I have used Otterbox and not only are the cases good, so is the customer service, great company. This case is very sturdy, and It feels light on the hands which I love, the only complaint I had was that since the case was on so tight, that my screen protector started to peel, other then that however it is a great case and I would highly recommend it
After a few days I purchased a Invisible sheild screen protector, and now the screen protector issue is solved invisible shields quality is amazing it covers the entire phone, I would not recommend buying a knock off screen protector only because it seems that they do not fit the edges on the screen properly. I hope this helps
Two Weeks Later
I have to say that I've tried out a few other cases such as caseology spigen ect but I end up coming back to this case because the buttons are easy to press, and it just feels sturdy in the hand. People are complaining that this case messes up their screen protector but the reality is that since the phone has edges it's going to be harder for adhesive to really stick on the surfaces of the screen. I HIGHLY RECOMMEND USING A WET NOT DRY screen protector as I do notice that the dry screen protectors seem to have the edges lift. I still love this case and I really do think it's the best out of the options out there at the moment. I would steer away from the bad reviews as again you pay for quality, you not only get a great case you get a company with an amazing lifetime warranty. It's a win win for you.
If you're familiar with the OtterBox Commuter series for other phones, this case will feel very familiar. It fits very snugly, which I feel gives it great protection. Some have complained that it fits too snug. I did not find this to be the case, but that may be because I put my phone in a case and leave it in. If you plan on constantly taking it out of a case and putting it back in, this case is most likely not for you. It is a dual layer case. The inner layer is a synthetic rubber like material that helps absorb shock, while the outer layer is a hard plastic.
Pros:
-Dual layer protection
-The case keeps the vitals recessed while still giving access to the edge functions and not obscuring the camera.
-Fits very snugly, keeping the phone from ever popping out of the case unintentionally.
-Not very bulky. This allows the phone to easily be put in a pocket and taken out without hanging up on clothing.
-The speaker is exposed, allowing sound quality to not be compromised.
-The covers for the sound jack and micro-USB port protect the ports very well, while still allowing access when needed.
-The buttons on the side have a very tactile responsive feel to them when encompassed properly by the case.
Cons:
-Unlike previous Commuter Series cases, it does not come with a screen protector.
-The sound jack and micro-USB port can be somewhat difficult to access with some cords due to the amount of padding on the case.
-Despite being a pro, the snug fit is also a con as it can cause screen protectors to start to peel up. You have to be very careful when putting the phone into the case when a screen protector is on to ensure it doesn't peel.
Overall, I think this case is great and gives more than adequate protection without adding much bulk to the phone. My biggest gripe is that lack of screen protector being included, as previous Commuter series cases did come with them in the packaging.
In order to get a good fit when putting the phone in this case, I recommend taking the two layers apart first. Insert the phone into the rubbery layer. Make sure that your phone is fully encompassed and not loose. Next, snap the phone with the rubbery layer into the hard case by angling it in from the bottom to the top.
Link http://www.amazon.com/OtterBox-SYMM...376&sr=8-2&keywords=otterbox+s7+edge+symmetry
$39.98
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

2 The DALLAS LAZER Slim case
The Artech21 Galaxy S7 Edge case fits my phone really well. The edges on the top and bottom are raised to protect the screen when the phone is lying facing down. The edges on the side are made in such a way that it protects the edges of the phone while also giving you easy access to the curved Edge of the S7 Edge phone.
The textured pattern at the back feels soft rubber/plastic and prevents the phone from slipping from your hands. It looks good and does not appear cheap like some other cases. The border is made of plastic and has a metallic look to it. It looks good, however, could be more heavier.
The volume and the lock button are covered by the case's buttons, which are again, pretty good. The buttons and the holes are all at proper places and do not interfere with the charging cable etc.
The camera cutouts are wide enough to avoid any flash related interference in the photos. The hearbeat monitor is also easily accessible from the camera cutout.
It just saved my phone.I slapped it on my Galaxy S7 Edge easily, put it in my pocket. I pulled it out with 2 fingers and mildly aggressively. It went flying from my hip off the stone patio table, off wooden banister, and finally took rest on the tiled front porch. Not 15 seconds in, I had the worst drop of my new phone. At this very moment, this case became locked on my phone. There was not a single scratch, scrape, dent or marks from the terrible fall. Superb protection.
Overall, its a decent case with a decent amount of protection for the Samsung Galaxy S7 Edge and I would recommend it
Link http://www.amazon.com/Artech-21-Sho...sr=8-1&keywords=slim+case+for+samsung+s7+edge
$15.98 dollars

UAG ASH CASES
I smashed my Note 5, glove box incident, where my case couldn’t have helped me, so I ended up getting an S7 Edge recently. The first few days that I had the phone I was an absolute mess because I did not have a case for it. I ordered a case from UAG, as they are the cases that I have used in the past for almost everything that I have had. In going through the cases on the market, this is by far the best that I’ve come across, but, it still seems a little weaker than a few of the other UAG cases that I have had in the past.
After getting the phone I went to Best Buy to see what was on the market while I waited for the UAG case to come, nothing really stood out to me as being the perfect solution, as a lot of chases did not seem that durable. Also, my biggest pet peeve with most cases is that they give a bit in the heat, especially the Speck cases which are usually pushed by T-Mobile. UAG has consistently given me a case that doesn’t give when it is hot out, which this one is no exception, and even after leaving my phone in the car a bit, it still did not slip off or become super loose.
The case is durable, but in comparing it to past UAG cases, it is a bit more malleable than the others, which gives me a bit of pause. The back of the case is blue, but also transparent. I’m not sure if it is standard for all S7’s, but the guy at T-Mobile put my bar code information across the back; you can actually see it through the case on a few pictures. The transparency would be one reason why I am giving it four stars, but also the flexibility of the case is another. Granted, this makes it very easy to put the phone into the case.
The case also has ridges, which are good, in that it holds the phone in place, but, if you have a screen protector, one of the things that will happen is that it is very prone to pop it up. If you read a lot of reviews for screen protectors, this is an on-going issue with the S7, and not the UAG case, as almost all of the cases have this feature.
Overall, a touch phone to design for, but certainly the best one that I found for the S7 Edge. The stars are in ranking the UAG case against the other UAG cases I have had, especially for the original Note Edge (steeper edge and only one side), which seemed to be more durable and less transparent.
Also, sorry if my pictures are horrible, my camera (that’s not on my phone) is not the greatest.

Vivid Arkansas Case
The first thing I would like you to know about this case is the fact that the inner section is not removable. It is lightweight, durable and the overall craftsmanship is of great quality. The color is not too loud but is actually very unique and fashionable.
With the inner section being a little more flexible, it allows a more comfortable press to the volume and power button. It’s ergonomically designed structure fits comfortably in the palm of my hands without being uncomfortable or slippery. It contours to the shape of my phone without looking bulky.The case has a snug fit and also provides my phone with great protection.
Accessibility: It has an easy access to all my phone’s ports along with an easily accessible and wide enough cut of to accommodate my phone’s camera. I was able to use all ports and buttons effectively.
Charging capability: it does not affects my phone’s capability of charging successfully with my charging adapter. Another great thing is the fact that it also does not interfere with wireless charging.
Flexibility : Firm and dual layer casing with the inner portion being extremely flexible; however it is easy to install.
Protection: Provides maximum protection with its dual material, it is very strong and sturdy.
Type of case: Day to day, casual, fashionable
Finger print smudges: Not evident
Drop test: phone remained intact and protected
Note: I am as of yet to set up my phone or even insert a sim card or apply a screen protector(phone might appear messy), video is for demonstration purposes only. Duer to the fact that the inner section of the case is kinda hard be sure to put it on from the top down,i realize it applies less stress on the volume and power buttons.
I would recommend this case if you are looking for a convenient way to protect your phone while having a durable case that will go the distance with you. It also makes a great fashion piece while getting you complements. I hope this review was helpful and before I go I will mention that I have received this product in exchange for my honest and unbiased review and based on its performance and functionality it has earned its rating. I love it.
Please see the following breakdown for why this product deserves 5 stars:
Ergonomics:
The case is very comfortable to hold. It does not feel too slippery in your hand, while at the same time being easy to clean (it does not pick up too much dirt). On the front side of the phone, the edges are raised so that the phone can be placed face down. The raised edges are rounded so that they do not feel uncomfortable when the phone is in use (at your ear).
Appearance:
I really like the design of the case. The plastic border crosses by the camera offering a very nice contrast. This would be more apparent in different colors, but I really like the subtle appearance of the color I chose.
Functionality:
The volume and power button are aligned perfectly. The buttons are very receptive when pushed and the case in no way reduces their use. The cutouts at the bottom of the phone are large enough for many different types of cable.
Conclusion:
This case is a great option for anyone looking for a slim design that will still offer adequate protection for drops. Although the design is a personal choice, I really do like the appearance of this case on my S7 Edge Silver phone. I did receive this product for free in exchange for my honest unbiased review. I rely on other Amazon reviews on a daily basis, and always provide honest feedback (and I think the pictures speak for themselves).
Link http://www.amazon.com/Artech-21-Sho...sr=8-9&keywords=slim+case+for+samsung+s7+edge 15.98 dollars

No Hiding , Show Off your phone Clear Case
The first thing I love and appreciate about this case is the fact that it has a dual layer which provides flexibility and is completely removable. I find this to be of much convenience where I typically remove the outer section of the case first and apply the inner layer to the phone before adding the outer layer. This provides a much more smoother installation without having too much pressure being applied to the volume control and power button. By following the instructions in the user manual also works effectively.
As it pertains to fit and structure of this case it is very slim lightweight durable and the overall craftsmanship is of great quality. It has a snug fit and all the ports were easily accessible including my camera, microphone, charging port, volume control button, power button and heart rate monitor. What I love the most about this case other than its overall protection is the fact that it also supports wireless charging.
Features of this particular case include:
-Raised lips and corners that provide protection from surface shock and scratches
-Precise cutouts perfectly aligned with the buttons.
- Color is even throughout; however I will note that the rose gold color might appear pink to others however it is perfectly fine on my behalf.
- Transparent
- Fingerprint smudges are slightly evident, however it is very easy to clean and care for
In comparison to other jelly cases I found that this case in particular provides more protection than others that i' ve experience and is of a more hard jelly case.
NOTE: Enjoy 20% off with coupon code: ARTECH21
I would recommend this case if you're looking for an effective way to provide protection to your phone while having a fashionable well-designed case to go the distance with you. I hope this review was helpful and before I go I will mention that I have received this product in exchange for my honest and unbiased review and based on its performance and functionality it has earned its rating. I love it. Please feel free to comment any questions that you might have below, i will try to respond in a timely manner, thank you for reading my review and happy shopping!
Link http://www.amazon.com/Artech-21-Sho...r=8-1&keywords=clear+case+for+samsung+s7+edge
15.98 dollars @Amazon

ordered the Obliq Slim Meta (No, not "Metal", they're tying to be very "meta' about the whole thing) from Amazon. I messed up and ordered the gray titanium instead of the silver, then re-ordered the silver. So before I sent the gray one back, I thought I'd snap some pics to share, along with my thoughts.
Basically I'm really happy with the case. It offers decent protection but doesn't add too much bulk, the top and bottom of the case elevate the screen off of any flat surfaces, and the sides have enough width to them that it has solved the problem of accidental side taps.
The case is a two-piece deal with a hard metallic-looking plastic shell over a softer rubber cover. The rubber cover extends beyond the hard shell in certain places. The silver is a great match for my silver S7E, although the gray didn't look too bad either.
Grip is greatly improved with a little bit of texture on the back, and the case fits well. The buttons work great, I'm able to attach headphones and a USB cable though the cut-outs, and wireless charging works with a Nokia DT-900.
Overall it's well-,made case that looks and feels great and offers about as much protection as you can get short something really big like an Otterbox.

Speck Candygrip Case
Before ordering I thought it was quite a nice looking case but I was afraid the rubber ribbing on the case was a gimmick. It seems that the majority of products these days are full of gimmicks. Upon receiving the case I've been pleasantly surprised. It's really everything that I want from a case. I like it even more than my last case that was made by Tech21 Impactology.
The case has a hard plastic outer shell. Because it's a very glossy plastic material it is very prone to receiving scratches. My case already came pre-scratched at the very top and very bottom. I suspect this was from rubbing against the product packaging. I'm curious to see how long it will take until the case is scratched up enough to start bothering me. Time will tell. However the glossy black with the gray ribbing looks beautiful. It is truly a great looking case and would not look out of place anywhere. Inside the plastic there is an extremely thin coating of silicone on everything. This probably makes it grip your phone to prevent it from falling out. There are also silicone lips on the front top and bottom allowing you to place the phone face down without risking scratches to the screen.
I'm not going to drop test my own phone to find out. But I feel that this case give very acceptable durability to a phone that is naturally more prone to damage than others. The s7 edge screen is great looking but I believe the design also increases your chances for damage. This is a well designed case and it gives you complete coverage to all areas of the phone. The small lip on the top and bottom follow the curve of the screen allowing the case to provide protection to flat drops of the screen as well as drops to the edge of the screen. I am confident that this case provides as good or better protection as any other case that is the same style and thickness. I've seen poorly designed cases. They're all over. This is not one of them.
The case feels great in your hand. I really hate the feel of the s7 edge without a case. It's the most slippery phone I've ever felt and the narrow edge gives you less to hold on to. With this case I no longer feel like the phone is going to slip out of my hand at any minute. The soft silicone ribs on the edges grant a firm grip to the edges finally. Trying to hold on to the phone by the edges before the case made for nervous moments.
The fit of the case is perfect. You slip either top or bottom in first then push on the opposite end. It is very easy to both install and remove from your phone. I saw other reviews that stated it's difficult to install/remove. The only way I could see having difficulty is if you are trying to put it on side to side instead of top to bottom. Looking at the case it's kind of obvious that it will go on better by starting with either the top or bottom.
All the buttons and port cutouts are dead on. I love the giant opening for the USB and headphone jack. No more taking cases off for large plugs. Very good design here.
I can't say enough good things about this case. Great design leads to great execution. This case is a keeper. The only small complaint is about the packaging providing scuff scratches to the product before getting a chance to unbox it. They were minor but I feel that a new product should always look new. May need a change to the packaging setup.
Link http://www.amazon.com/Speck-Product...r=8-1&keywords=speck+case+for+samsung+s7+edge
$34.98 dollars

i will add more reveiw when i receive them
thx xda and the boss brandon

Something that would be really useful is if you could give us your impression of how slippery each case is. I don't want a slippery case no matter how thick and protective it is. Avoiding drops is better than protecting it after you've dropped it.
Thanks.

meyerweb said:
Something that would be really useful is if you could give us your impression of how slippery each case is. I don't want a slippery case no matter how thick and protective it is. Avoiding drops is better than protecting it after you've dropped it.
Thanks.
Click to expand...
Click to collapse
The Speck Candyshell Grip will always have the best grip. I've tried well over 100 different cases between my past 3 phones and no case has better grip so far.

Pilz said:
The Speck Candyshell Grip will always have the best grip. I've tried well over 100 different cases between my past 3 phones and no case has better grip so far.
Click to expand...
Click to collapse
yes , and the vivid artech 21 case has good grip too

dallasmanic said:
No Hiding , Show Off your phone Clear Case
Click to expand...
Click to collapse
The back is soft TPU material right?

I have been using the POETIC Affinity Series. I got the clear one to really show off my gold phone. I seem to always buy their product no matter the phone. Its thin but gives minor drop protection. I would not go bouncing it off a roof. lol
The clear back is not a fingerprint magnet for those that seem to really worry about that.
stock photo:
Link: http://amzn.to/1T0zXSq

as the admin messaged me that i put affliation link into the review , i have to said it is not afflition link at all
please check it out what is afflition link before remove my link and change my review

joey3002 said:
I have been using the POETIC Affinity Series. I got the clear one to really show off my gold phone. I seem to always buy their product no matter the phone. Its thin but gives minor drop protection. I would not go bouncing it off a roof. lol
The clear back is not a fingerprint magnet for those that seem to really worry about that.
stock photo:
Link: http://amzn.to/1T0zXSq
Click to expand...
Click to collapse
i have been contacted by poetic and i ordered the cases from them . But the photo sucks , right ? i wish they can realize that and produce a more attractive case

I really like this case. It's sleek and looks nice.
Pros
1. Phone fits snugly
2. Raised lips at top and bottom for extra protection
3. Look good
4. Holds up to 3 cards and easy to open
5. Buttons line up perfectly.
6. Double lining case for extra protection
Cons
1. Screen protector doesn't stay on due to tight fittings. (Solution: file down edges with file or scissors)
2. Card slot is very tight
3. Compared to my Onway case, this feels cheaper and more malleable.
4. Card slot could be a tad bigger.
Overall, it's a very nice case and I highly recommend it especially for someone who doesn't like carrying their wallet.

SGM Rugged Case Review
First the pros. There is nothing safer for your phone than this case. It isn't going anywhere. Even trying to open it back up after enclosing it is very difficult.One review said that the covers that cover your earphone port and charging port were unnecessary, I disagree, although they could be a nuisance, I didn't find them to be a problem, and they help keep out dirt and other debris. I also did not find the case to be "too much". It wasn't too bulky or goddy (which I hate). the S7 is bigger and heavier and I actually found peace of mind with it in this case because I am almost positive that when it drops, it's doomed.
But there are cons. The front screen protector sweats (yeah, I thought that weird also). Also it doesn't register your finger press all the time or very well. It would miss keys, press the wrong ones, or if there was a scratch on it lose that key all together. Sometimes the volume keys were harder to press. Earlier I said that the port covers didn't bother me and I understood why they were there, the volume and power keys, I don't. They are completely covered and difficult to press at times, and again you could think you locked your phone, but it didn't and welcome to butt dialing all over again. The most annoying part though was that you were not going to be pulling down the menu from the top ever! There are features on the S7 that make this less necessary, but you better never need to do it because I had to give up trying.
All in all, I might have given this a 4, if the screen was thinner and if I didn't have to have body builder hands to use it. It's a good a case, and some people might enjoy it. I know I felt my phone was safe, that's for sure. Some people are even willing to give some usage up for safety. I am not one of those people.

As someone that owns a ton of cases for all of my phones I disagree about the Otterbox Symmetry case. The buttons are nothing short of awful to press and require so much force the case physically moves inward with each press. It was bad enough that I retuned the case which is not somthing I do unless there's a serious flaw with the design. The same issue also persists in the Otterbox Strada case that I own which would be a great case I'd the buttons didn't require an unreasonable amount of force to push.

Pilz said:
As someone that owns a ton of cases for all of my phones I disagree about the Otterbox Symmetry case. The buttons are nothing short of awful to press and require so much force the case physically moves inward with each press. It was bad enough that I retuned the case which is not somthing I do unless there's a serious flaw with the design. The same issue also persists in the Otterbox Strada case that I own which would be a great case I'd the buttons didn't require an unreasonable amount of force to push.
Click to expand...
Click to collapse
then you can buy a speck case plus a tempered glass screen protector

best thin case note 20 ultra with grip

I find most cases get slippery on the sides.
I had speck in the past but it was OK any others that you recommend thanks

From what I've seen so far:
1. Spigen Liquid Air - Seems to have some good grip potential, especially with ridges on the sides. However, the gap around the camera bump is an interesting design choice...
2. Samsung OEM Matte Black Silicone Case - Seems to have a decent grip on the matte finish and very minimal.
3. Pitaka Air or MagEZ Case - While I haven't used them myself, I've heard good things about the grip/feel of the Ipitaka cases.
I'm personally going to try the PItaka MagEZ case when it becomes available (Aug 21st) since I like the idea of having embedded metal so I don't have to stick a scosche metal piece on the back of the case.
Also, just a heads up. According to some initial reviews on the new speck 'grip' cases, they're using a more plastic-feeling material for grips instead of rubberized and people are not happy about it. (I previously used them as well)

I switch phones often, but one thing that remains constant is my Pitaka MagEZ cases. Have purchased well over 10 of them at this point. Wouldn't choose any other thin case

PseudoChris said:
From what I've seen so far:
1. Spigen Liquid Air - Seems to have some good grip potential, especially with ridges on the sides. However, the gap around the camera bump is an interesting design choice...
2. Samsung OEM Matte Black Silicone Case - Seems to have a decent grip on the matte finish and very minimal.
3. Pitaka Air or MagEZ Case - While I haven't used them myself, I've heard good things about the grip/feel of the Ipitaka cases.
I'm personally going to try the PItaka MagEZ case when it becomes available (Aug 21st) since I like the idea of having embedded metal so I don't have to stick a scosche metal piece on the back of the case.
Also, just a heads up. According to some initial reviews on the new speck 'grip' cases, they're using a more plastic-feeling material for grips instead of rubberized and people are not happy about it. (I previously used them as well)
Click to expand...
Click to collapse
Does the pitika have a lip to protect the screen? Thanks

magichoward said:
Does the pitika have a lip to protect the screen? Thanks
Click to expand...
Click to collapse
The "Air" series cases generally don't rise above the screen.
They do have a thicker "Pro" series option with a raised lip to protect the screen, bumpers on the corners, etc.

Samsung OEM silicon. Can confirm it has excellent grip

seoulbrova said:
Samsung OEM silicon. Can confirm it has excellent grip
Click to expand...
Click to collapse
The cloth one does as well since there's a slim silicone band along the edge.

zedwards said:
The cloth one does as well since there's a slim silicone band along the edge.
Click to expand...
Click to collapse
Yes I've seen the one the only concern I've read it's a little difficult to remove the spen.. Your thoughts.

I will never choose Pitaka again.
Edges are rough and the upper part could have covered more
But I especially won't because it damaged my Note 10+ because of a defect in the inside of the case that made a grain of sand sized hole in the back of my phone.

Been using the Zizo Bolt on my Note 10+ for over 6 months. Excellent grip, usability and protection.
Kick stand doubles as a grip; either fully retract/extend it to keep from losing it's pins, if not secured in either position they can work their way out in your pocket! No issues with this case otherwise.
The one for the 20 seems to come with a temper glass screen protector; that may not work so well.
That's not present on the one for the 10.
Presumably you can use it without and substitute one one your choice?
Damn the 20's cam has a big bullseye on it... no likey. Buying a good case for the 10+ was very hard early on, no doubt the 20 U will be harder to protect
https://www.zizowireless.com/produc...axy-note-20-ultra-case?variant=32315584282672

magichoward said:
I find most cases get slippery on the sides.
I had speck in the past but it was OK any others that you recommend thanks
Click to expand...
Click to collapse
https://www.amazon.com/JJNUSA-Handmade-Leather-Samsung-Galaxy/dp/B08DXWJSQ1?ref_=ast_sto_dp
you know i never thought trying to find a case was going to leave me so hard pressed. note i do not mind the camera bump one bit. but they could have rounded out the camera hump a bit more. not the corners, but where the surface meets the edges and also they could have slanted the sides a bit more angled. who knows they did pull it off pretty good.
still on the camera bump.
note: with JJNUSA leather case you will be covering the mic on the camera bump. if that is a problem for you look elsewhere for a case.
i have received 200 in incentives to order goodies when i got my phone pre ordered and used it to order a few cases.
cases i ordered:
samsung rugged: bulky, heavy, don't like the texture on the back and flimsy kickstands that shoot off when used
samsung leather case: upgrade from last years, 2g lighter. seamless, but warps at the bottom. good cam protection.
samsun silicon: unsure if food grade safe. and slippery as glass
-other cases-
spigen Rugged Armor: oddly best all tpu case with carbon fiber accents. the back is slippery if trying to reach across the screen. side bumpers have one way slip grip and flimsy. camera is well protected. pen cut out too deep corner exposed but covered. top /bottom bumper good but top may block ear piece. 2g heavier then jjnusa leather
...now my official review of the JJNUSA Handmade Leather Case...
NOTE i used amazon prime
don't let the first pic they have on amazon throw you off, but what bothers me is the video they added to the product and it is of the s20 ultra; the camera lens is so scratched. i am still baffled how they did that. then again we will see in due time, because i can not stand the samsung leather case(which got me hooked on leather cases oddly) it is too slippery. the jjnusa case has tpu sides and saddle leather on back with plastic on the inside that the phone rests on. but i will say the leather on the back is so soft i think it sorta makes up for the lack of suede like the official samsung case has. then again the leather is so thick its' edges pop out the mold a teensy-weensy bit, but i doubt with proper use and not picking at it it will survive for a long time. with the 5% off coupon i also got another 1 usd off(who knows if it was the amazon prime). so for 19.95 it is a steal. most other leather cases are $30+. a steal; why may you say? hold on let me get to the rest of it. if we all remember the lg g4 leather back it was a looker. that was it, because it scratched easily and punctured easily. then we go onto the samsung leather case that scratches easily with minimal show. further more i can not say what that will mean over long term usage with this case from jjnusa. treat it lightly and it should be fine. now back to the leather on the jjnusa case. the leather reminds me of the type you get on a saddle and does not separate from itself. that is a plus. but a minus if the antiquing they use comes off very very easily?, and it does(con or not?) i had a cane that had antiquing and it turned my hands black, but after it leveled out it was fine. you know they always slap so much on to fill in the design that almost certainly more then half they put on will rub off. i have rubbed off some already. hence it would not rub off like wow, i had to use my nail. no way does it show like scratches on the samsung leather case. either way the extra antiquing will no matter what fade away over time and settle down to where it should be. i still think it will look good. at the same time the leather is much more scratch resistant then the latter. and the design and the look really grew on me. now on to the sides. the power button and volume are labeled with symbols and i like it even though i will never look at it. what else i like is that they are tpu like the rest of the sides. the tactile of the buttons are sturdy then again not too stiff not too mushy. then there is a bonus or an achilles heal; you move down the same side as the buttons and find a wrist strap punch out so you can add a wrist strap. have not tested it, seems like it should be worthy of use and not fearing. the bonus is removing the phone from the case, it does not shoot out like it does with the samsung leather case does. still it holds it in better. this is where i tell you that the jjnusa case has way better screen protection that leaves a better feel in the hand. the samsung leather case has a squidgy spongy top and bottom. the bottom is already warped and i never used it; i just put it on a few times and took it off. also a fail for the bottom bumper is the difficulty to remove the spen without nails. the jjnusa case is cut out just right and since it is thinner and more stiffer in a good way you can press your thumb or finger and hear that satisfying click to eject it. with that said the top and bottom bumper are raised higher then the samsung to protect the screen. the samsung case is more flush and flimsy.
i am a happy camper and if it fairs well i will update to 5 stars from 4, but i am really thinking at the price to slap down for another. as we all know leather cases do not last as long as other types
the reason i gave it 4 stars is i never really heard of JJNUSA till i saw them on etsy.com and since they where based in china i thought meh. then i thought to ebay's third party cases and said but leather? does not smell much like leather, oddly that is how saddles with the same type of leather smells. or it could be the antiquing they used and the shipping package. it was not shipped in a box or cheap plastic, it was in a cloth sleeve in a sealed padded envelope. JJNUSA do claim Oregon origins... yeah right etsy.com says ships from china.
i have played around with plenty of cases and phones in cases so it's not like i only have really had the note 20 ultra... just do not get one of them ultra thin all tpu cases. i have one for my lg g4 and only really protects the sides and back. busted the screen.

the quest for the perfect case continues

I hope this helps my detailed review of three of my best cases for the note 20 ultra... For those still on the quest of finding the perfect case.
Mod Edit

Mil drop protection with raised screen/cam protection and a easy to grip/clean surface.
Corner hits and face plants are common in drops; make sure the case you choose can handle a 2-3 foot drop onto concrete. Make sure any case fully protects the spen corner; they will corner hit here
Waterproofing not needed; these phones are well sealed.
These phones absolutely need a case. A good case makes them easier to handle, hold and helps prevent accidentally screen touches yet leaves the curved screen area easy to use.
For the 10+ the Zizo Bolt case is still my favorite. This type of two layer protection works well* and when in it's clip on back there are 3 layers.
*how I carry and occasionally drop it most times. The hard second polycarbonate shell reinforces the semihard urethane inner shell and keeps it in place during impacts.
After a few good corner impacts I replace the case to be on the safe side. It's the spen corner that I really keep a close eye on.
The retired cases still look great... spare parts as it's the urethane lining that could fatigue. Just not worth risking damaging a $1G phone over a $20 case.

I'm tempted to buy a bare case but it's unfortunately expensive.

Nastrahl said:
I'm tempted to buy a bare case but it's unfortunately expensive.
Click to expand...
Click to collapse
The Bolt is under $20. My favorite all time case.
Don't let the price fool you...
https://www.amazon.com/Galaxy-Ultra...y=200623&hvtargid=pla-945538896475&psc=1&th=1
The cam protection for the 20 isn't as good as my 10+ but that's because of Samsung's blunder of making the cam array so wide.
If you do get a Bolt either keep the kickstand fully retracted or extended. If the stand is loose in your pocket it can dislodge its retainer pins. Happened once to me but they were in the pocket and I simply reinserted them.
The kickstand also makes a convenient handhold as well as to help keep the phone cool when charging.
I don't recommend using glass protector screens with this case. You might be able to but it may dislodge it when you're inserting the phone into the case.
I use wet apply IQ Shield urethane screen protectors.

I didn't have much faith in this case but after receiving it from Amazon I really enjoy the grippy feeling on the sides, the built-in kickstand and how easy it is to remove the phone if you need to compared to something like an OtterBox defender. The case I am referring to is the SAMSUNG Galaxy Note 20 Ultra Case, Rugged Drop Protection Cover - Black which I purchased from Amazon and it's currently $28. I have already dropped it from probably 4 feet directly onto a hard stone floor and all it did was left a small scratch on one corner of the case but the S-Pen did eject which I've noticed happens alot regardless of the case.

BigMosley said:
I didn't have much faith in this case but after receiving it from Amazon I really enjoy the grippy feeling on the sides, the built-in kickstand and how easy it is to remove the phone if you need to compared to something like an OtterBox defender. The case I am referring to is the SAMSUNG Galaxy Note 20 Ultra Case, Rugged Drop Protection Cover - Black which I purchased from Amazon and it's currently $28. I have already dropped it from probably 4 feet directly onto a hard stone floor and all it did was left a small scratch on one corner of the case but the S-Pen did eject which I've noticed happens alot regardless of the case.
Click to expand...
Click to collapse
Lol, it's so cute; the spen wuves to pop out. You need to be careful not to step on it or leave it behind.
The Bolts I have never looked worse for the wear after drops on concrete.
However when you see the urethane take on a shiny look near a point of impact it means it's been stressed. To error on the side on caution I replace them. The spen corner is the most vulnerable corner and the 10+ loves to fall right there.
Been doing good haven't dropped the phone in months... of course it's only a matter of time.

This is the perfect one for me. UAG Civilian Case. Feels great in hand and has excellent protection. Not too heavy like monarch but still great protection.

blackhawk said:
The Bolt is under $20. My favorite all time case.
Don't let the price fool you...
https://www.amazon.com/Galaxy-Ultra...y=200623&hvtargid=pla-945538896475&psc=1&th=1
The cam protection for the 20 isn't as good as my 10+ but that's because of Samsung's blunder of making the cam array so wide.
If you do get a Bolt either keep the kickstand fully retracted or extended. If the stand is loose in your pocket it can dislodge its retainer pins. Happened once to me but they were in the pocket and I simply reinserted them.
The kickstand also makes a convenient handhold as well as to help keep the phone cool when charging.
I don't recommend using glass protector screens with this case. You might be able to but it may dislodge it when you're inserting the phone into the case.
I use wet apply IQ Shield urethane screen protectors.
Click to expand...
Click to collapse
Itlooks unusual, I like it. I like the kickstand feature too.
I just can't really figure out how bulky it is, since I'm really looking for the less possible.
Strongly tempted to give it a try. Thanks!
---------- Post added at 03:03 PM ---------- Previous post was at 03:02 PM ----------
antisocialbratt said:
This is the perfect one for me. UAG Civilian Case. Feels great in hand and has excellent protection. Not too heavy like monarch but still great protection.
Click to expand...
Click to collapse
Too bad the orange part are much eye-catching in my opinion, but i like the back.

Nastrahl said:
Itlooks unusual, I like it. I like the kickstand feature too.
I just can't really figure out how bulky it is, since I'm really looking for the less possible.
Strongly tempted to give it a try.
Click to expand...
Click to collapse
It's actually quit thin which makes it less of a handful.
It has enough meat to protect the phone but not overkill. The 10+ is way too slippery with no case.
This case sticks in my hand.
I hold by the bottom corner with my thumb a lot or by the kickstand.
I use the kickstand when charging to help it cool.
It's a cool looking case that doesn't attract dust. Cleans up pretty with a toothbrush and soapy water.
I go with grey or black as red or blue may throw off your screen color perception. Plus the darker color scheme doesn't "advertise" your holding a $1 G phone.

Nastrahl said:
Itlooks unusual, I like it. I like the kickstand feature too.
I just can't really figure out how bulky it is, since I'm really looking for the less possible.
Strongly tempted to give it a try. Thanks!
---------- Post added at 03:03 PM ---------- Previous post was at 03:02 PM ----------
Too bad the orange part are much eye-catching in my opinion, but i like the back.
Click to expand...
Click to collapse
I kinda like the orange part and got it for this color combo You can try the blue version of this case, that has grey color instead of orange