Related
I have recently flashed one of the nougat Roms and would like to return to the stock from with Android 6.
My phone is a virgin contract phone(with optus boot screen) eva-l09 FCC ID qiseva-l09 I 6369a-eval09.
Can anyone tell me which stock from to get so that things like Android Pay work?
Australian Virgin phone btw
Pleaae, search in the forum, there are some threads about this...
I have searched,there is a thread with a heap of different stock firmwares but I'm unsure which one is right because I flashed the nougat Roms and now I'm unsure of the model number of the phone and I have no backup.
Presumably the model number in the nougat Roms info is wrong,maybe I have cross flashed?
nuttzo33 said:
I have searched,there is a thread with a heap of different stock firmwares but I'm unsure which one is right because I flashed the nougat Roms and now I'm unsure of the model number of the phone and I have no backup.
Presumably the model number in the nougat Roms info is wrong,maybe I have cross flashed?
Click to expand...
Click to collapse
Use the 136 full rom.
https://mega.nz/#!QE4TTSzJ!OjP6yXFtliK4XDRHLNIAKgxpf0gmhEeksDr_fjja0oY
1-. create folder "dload" in your external sdcard. Uncompress the rom zip inside it (one file "UPDATE.APP" and 2 folders: "dt" and "hw")
2-. turn off yout phone
3-. turn it pressing and holding power button + volume up + volume down
wait to restore.
Can you let me know if this works for you, nuttzo?
I've been trying to do the same as you for about a week now, with no progress
OK,ill have to find a different mirror for the file because that mega link seems to not work properly.
Through the phone I've tried downloading the file and both times the file is corrupted despite appearing to download fully.
On the raspberry pi the file stops once it hits 2gb and complains that the file is too big.
Thanks Iomunet but I can't download the file.
Mega sucks,i don't know why people use it.
Try installing mega app or from computer...
nuttzo33 said:
Thanks Iomunet but I can't download the file.
Mega sucks,i don't know why people use it.
Click to expand...
Click to collapse
I only have a raspberry pi and the Android phone.
Mega sucks and doesn't work on both.
Unfortunately I don't have a Windows PC anymore.
OK I've managed to find another link to the stock ROM and have successfully downgraded back to marshmallow.
Android pay is still not working,any way to fix that?
Also Huawei id doesn't work,something about unable to service region.
Any way to fix these 2 issues?
OK it looks like if I install twrp after unlocking the bootloader I can flash the oeminfo IMG and remove the c900 build number from the phone.
That should get Android Pay working.
Now I have to pay for a bootloader code because I don't have Windows and I can't seem to get it through Huawei because their emails in chinglish are cryptic and the website links are broken.
Install adb and fastboot from your Pi
https://github.com/blobbsen/adb-fastboot-executables-for-ARM
lomunet said:
Install adb and fastboot from your Pi
https://github.com/blobbsen/adb-fastboot-executables-for-ARM
Click to expand...
Click to collapse
You still have to unlock the bootloader to flash twrp don't you?
I have the Android and fastboot tools installed in Raspbian but I never checked the OEM unlock option in the developer options.
When I tried flashing twrp before it came up with an error something about unable to write due to permission error.
I assumed it was because the bootloader was locked.
you must unlock your bootloader first, yea. Huawei have a webpage to do it.
nuttzo33 said:
You still have to unlock the bootloader to flash twrp don't you?
I have the Android and fastboot tools installed in Raspbian but I never checked the OEM unlock option in the developer options.
When I tried flashing twrp before it came up with an error something about unable to write due to permission error.
I assumed it was because the bootloader was locked.
Click to expand...
Click to collapse
lomunet said:
you must unlock your bootloader first, yea. Huawei have a webpage to do it.
Click to expand...
Click to collapse
Haven't had success with getting to the Huawei page to unlock bootloader.
The closest I got to one I couldn't proceed because it required my mobile number but none of the country codes were from Australia so I couldn't get the SMS.
This is the email I got from Huawei which I couldn't make sense of.
Dear User,
Huawei Customer Service is pleasure to be at your service,sorry to bring you the trouble,if you want to unlock your phone, you should meet these conditions as follow:
1.Please register your Huawei ID in our official website http://huawei.com/en/ on your phone.
2.Log in your Huawei ID for continuously 14 days.
3.Each Huawei ID should not apply for the unlock code more than twice within half years.If you meet the information,please go to http://emui.huawei.com/en/ and click the 'download'button to login your Huawei ID other than any other third party ID to apply for the unlock code.Please contact us by mail or local service hotline as following if error message appears.
TEL: http://consumer.huawei.com/en/contact-us/index.htm?tag=hotline
Mail: http://consumer.huawei.com/en/contact-us/index.htm?tag=email
Please submit your mobile model, SN, IMEI/MEID and erro message in your e-mail.We also need to know that your phone is rooted, it can be out of the best working state and part of functions may not be able to work normally. In additon, the system is vulnerable to be invaded by viruses once your phone is permitted to unlock. What's more, for the lacking of fully tested, the third party software will not be compatible with your phone. Unlocking will bring unexpected negative impacts and the device will be not normal, and can not be restored, Huawei after-sales service office will not provide warranty service for your rooted phone, and you may bear the cost. So we strongly advise you to think it twice.
If you have any other problems, please send your feedback to us. We will be at your service to help you to solve your problems.
Once again thank you for contacting Huawei device.
Best Regards.
Huawei Device Customer Care Team
I think that exist a windows software to generate the code... If you want, send in a pm your phone info, imei, s/n... all data asked in huawei page and I can try to get the code tomorrow when I back to the office (I haven't windows at home)
nuttzo33 said:
Haven't had success with getting to the Huawei page to unlock bootloader.
The closest I got to one I couldn't proceed because it required my mobile number but none of the country codes were from Australia so I couldn't get the SMS.
This is the email I got from Huawei which I couldn't make sense of.
Dear User,
Huawei Customer Service is pleasure to be at your service,sorry to bring you the trouble,if you want to unlock your phone, you should meet these conditions as follow:
1.Please register your Huawei ID in our official website http://huawei.com/en/ on your phone.
2.Log in your Huawei ID for continuously 14 days.
3.Each Huawei ID should not apply for the unlock code more than twice within half years.If you meet the information,please go to http://emui.huawei.com/en/ and click the 'download'button to login your Huawei ID other than any other third party ID to apply for the unlock code.Please contact us by mail or local service hotline as following if error message appears.
TEL: http://consumer.huawei.com/en/contact-us/index.htm?tag=hotline
Mail: http://consumer.huawei.com/en/contact-us/index.htm?tag=email
Please submit your mobile model, SN, IMEI/MEID and erro message in your e-mail.We also need to know that your phone is rooted, it can be out of the best working state and part of functions may not be able to work normally. In additon, the system is vulnerable to be invaded by viruses once your phone is permitted to unlock. What's more, for the lacking of fully tested, the third party software will not be compatible with your phone. Unlocking will bring unexpected negative impacts and the device will be not normal, and can not be restored, Huawei after-sales service office will not provide warranty service for your rooted phone, and you may bear the cost. So we strongly advise you to think it twice.
If you have any other problems, please send your feedback to us. We will be at your service to help you to solve your problems.
Once again thank you for contacting Huawei device.
Best Regards.
Huawei Device Customer Care Team
Click to expand...
Click to collapse
lomunet said:
I think that exist a windows software to generate the code... If you want, send in a pm your phone info, imei, s/n... all data asked in huawei page and I can try to get the code tomorrow when I back to the office (I haven't windows at home)
Click to expand...
Click to collapse
Done,i sent you a pm.
Thank you for all your help.
You are a stand up guy/gal Iomunet,thanks for helping me.
Do I mark as solved or anything like that?
Just out of curiosity, how was nougat? Why did you switch back?
Hi,
I am currently the owner of a P10 VTR-L09GBRC5555
The phone is branded by Three UK(carrier) but not locked into theyr network. I am on android 7.0 nougat (B152) and after a while I realised that the software update option is nowhere to be seen. I unlocked the bootloader before but locked it back beacouse I wasn't able to use banking apps beacouse of it. I have a screenshot of my device with the software update missing, any ideas why this is happening? Do let me know if you need any more info I can provide in the hope that somebody can help me.
Regards
Where's your screenshot?
The unlocked bootloader and root can be hid by MagiskHide - it works fine BTW.
Only fix I can provide you is to do a factory reset via eRecovery.
Backup all your data with HiSuite app on PC - note that it doesn't backup Photos and Videos, so copy them manually to SD or PC.
Then boot into eRecovery by connecting USB, power off the phone and power it on again while holding Vol+.
Jannomag said:
Where's your screenshot?
The unlocked bootloader and root can be hid by MagiskHide - it works fine BTW.
Only fix I can provide you is to do a factory reset via eRecovery.
Backup all your data with HiSuite app on PC - note that it doesn't backup Photos and Videos, so copy them manually to SD or PC.
Then boot into eRecovery by connecting USB, power off the phone and power it on again while holding Vol+.
Click to expand...
Click to collapse
I can not upload a photo yet beacouse
To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding!
I get this message when I try to upload a link to my picture.
Marius87ism said:
Hi,
I am currently the owner of a P10 VTR-L09GBRC5555
The phone is branded by Three UK(carrier) but not locked into theyr network. I am on android 7.0 nougat (B152) and after a while I realised that the software update option is nowhere to be seen. I unlocked the bootloader before but locked it back beacouse I wasn't able to use banking apps beacouse of it. I have a screenshot of my device with the software update missing, any ideas why this is happening? Do let me know if you need any more info I can provide in the hope that somebody can help me.
Regards
Click to expand...
Click to collapse
Are you sure that f/w is correct? Have you flashed a different firmware when rooting etc and now update is missing? The option to update should still be on HiSuite if you plug into computer?
Jannomag said:
Where's your screenshot?
The unlocked bootloader and root can be hid by MagiskHide - it works fine BTW.
Only fix I can provide you is to do a factory reset via eRecovery.
Backup all your data with HiSuite app on PC - note that it doesn't backup Photos and Videos, so copy them manually to SD or PC.
Then boot into eRecovery by connecting USB, power off the phone and power it on again while holding Vol+.
Click to expand...
Click to collapse
I don't believe Magisk hides from all banking apps etc. I used to have it on my old phone and Barclays wouldn't hide. Have asked people to confirm if this is still the case but haven't had a response.
SavageRobot said:
Are you sure that f/w is correct? Have you flashed a different firmware when rooting etc and now update is missing? The option to update should still be on HiSuite if you plug into computer?
I don't believe Magisk hides from all banking apps etc. I used to have it on my old phone and Barclays wouldn't hide. Have asked people to confirm if this is still the case but haven't had a response.
Click to expand...
Click to collapse
Hi, and thank you for your involvement, I hadn't flashed anything on the phone. When I unlocked it via a code from Huawei I was trying to rebrand it from Three UK to a normal variant, non branded by carrier. As I read online rebranding must be done to a VTR L29, so a dual sim or else my sim would not be recognizer. The rebranding process didn't take place beacouse I did not know how to do it, it is just too complicated for me. At the time I had B152 on the phone, and I found in FF an approved B152 software, and I flashed that, or rather just made a kind of software update via system update option. Since then I seem to be missing the update software option. The screenshot is missing from the tread beacouse I am a newbie and the forum will not let me upload things yet.
Regards.
Fix?
Hi, did you ever find a fix for this? I am having the same issue. Currently on B152 with no stock applications and update settings missing
winefolife said:
Hi, did you ever find a fix for this? I am having the same issue. Currently on B152 with no stock applications and update settings missing
Click to expand...
Click to collapse
Hi
I did a rebrand, so new software, converted it from Three Uk branded phone to dual sim international variant, with the help of xda user jannomag, hope this helps.
Brand new here, looking to unlock, root and then flash a standard Android build or custom DeGoogled ROM for my new device. I was looking to find a way to unlock the bootloader to start and found that Huawei have stopped giving out unlock codes and that the info around unlocking wasn't great so I made a note of all my steps as below.
Please let me know if this works for you and if you have any issues, please also read and follow the guidelines carefully as there are lots of things like using all the applications as an administator and changing directories that are important.
I am also looking for a way to install TWRP or another recovery thing on this device so I don't brick it, as I want to root the tablet and muck around with it. Has anyone got any experience of doing this successfully and does anyone have links to methods to create a cloned backup of the standard OS?
This was done on a brand new Mediapad M3 Lite 8 (the Wifi version, not LTE) with Android 7.0, EMUI 5.1, CPN-W09, build CPN-W09C100B251 - BUT will probably work on the LTE version, the non-lite version and the 7 and 10 inch models.
IMPORTANT: This costs money and is done through the DC Unlocker tool, it costs 4 credits (4 euros/dollars) for the Mediapad M3 Lite 8 (Wifi, not LTE) as Huawei now do not offer the bootloader code AT ALL . I have copied/streamlined the steps below that were found as guides originally at the dc unlocker website, check their site guides to find originals.
Step 1 - Developer Options enable
Go to settings, about tablet, tap build number 7 times to unlock developer options
Go to developer options, enable OEM unlock, enable USB debugging
Step 2 - Enable manufacture mode
If your phone has a dialpad, enter dial pad code *#*#2846579#*#*
IF your phone doesn't have a dialpad, go to calculator and enter ()()2846579()()=
This willl take you to a developer menu, select "Project Menu", "Background settings", "USB ports settings", "Manufacture mode".
Step 3 - Install drivers
Connect your Android device to your PC with a usb cable and either install Hisuite from the connected drive that will attach, or download it from the Huawei website by searching for Huawei Hisuite and going to their official website.
To check this has worked, go to Device Manager on your PC and look for Modems - there should be an entry called Android Adapter Modem - if this is not present try disconnecting/reconnecting your device and restarting Hisuite.
Step 4 - Read bootloader code
Download the latest DC Unlocker tool from dc-unlocker dot com and extract it, then AS AN ADMINISTRATOR (right click and Run as Administrator) run the client.exe (was called dc-unlockerclient2.exe)
Click Select Manufacturer dropdown and change to Huawei Phones, not Modems, press the magnifier/search icon at bottom left and your phone info should be found. This should also
Step 5 - Buy credits from the dc unlocker site as a new user, try 4 credits first and then login with these new user details in the dc unlocker application on your PC, this will show your credits and the phone connected as well as the cost. Click the Unlocking icon on the top right and click Read botloader code to get your code. Make a note of this/copy it somewhere.
Step 6 - Go back to the folder that dc unlocker is in
Go into the unzipped folder and then copy the location of this folder by clicking on the address bar in File Explorer and copying this location, you'll have something similar to
C:\Users\ExampleUser\Downloads\dc-unlocker2client_1.00.1403
Step 7 - Turn off your phone and turn it back on holding the Vol down and Power buttons to enter fastboot mode, connect your device to your PC
Step 8 - Open cmd by searching for cmd in windows, right click cmd and open it as administrator, you'll get the black and white windows terminal
In the terminal type "cd C:\Users\ExampleUser\Downloads\dc-unlocker2client_1.00.1403" (or the path for the latest version of the dc unlocker you have downloaded) without the quotation marks and with YOUR directory path as described above. The command cd just changes directory to the one you give. Your terminal should now show the above directory as the path in which it now sends commands, i.e the > mark is now displayed after the directory path we copied
Step 9 - Type "adb devices" without quotation marks to start the adb daemon
Step 10 - Type "fastboot devices" without quotation marks and you should see a device number with the word fastboot next to it.
Step 11 - Now type "fastboot oem unlock" without the quotation marks, followed by a space and then your bootloader unlock code i.e
fastboot oem unlock XYZ123456789
Step 12 - Your device should show a screen asking you to accept the unlock, then onto another screen where you should press the power key to continue onto booting your factory reset unlocked device.
Step 13 - You might have to disconnect the USB cable and reboot your device now, and you'll set up the device from scratch again - but now the bootloader unlocked, allowing you to load stuff like TWRP if you can find the right version - which I can't right now! :good:
I have also now been able to install TWRP by using the TWRP image specifically for BAH-W09 found on page 17 of the "TWRP (greatslon mod)" in the link provided by pitapart
thread. I can't post links yet which is why I'm typing to source....
I have been trying to flash SuperSU using the latest 2.82 zip but keep getting the error "Extracting Ramdisk - Failure, aborting", which is the same error I'm getting when trying to root using SRKtool, both the 2.1 universal version and the 2.0 Huawei version, using option 1 for Mate P8 or option 6 for systemless.
I've downloaded a system root version of SuperSU (google "supersu system mode", first XDA thread) and flashed using TWRP, it says it has installed but the SuperSU app doesn't show root, and typing "su" in TWRP console doesn't show I can do commands in superuser mode. Can anyone help?
I recently have been purchased the LTE version of this device. Although I cannot try this out currently, I probably will in the future so please keep us updated about your experiments for reference!
avkjbl5bak said:
I have also now been able to install TWRP by using the TWRP image specifically for BAH-W09 found on page 17 of the "TWRP (greatslon mod)" in the link provided by pitapart
thread. I can't post links yet which is why I'm typing to source....
I have been trying to flash SuperSU using the latest 2.82 zip but keep getting the error "Extracting Ramdisk - Failure, aborting", which is the same error I'm getting when trying to root using SRKtool, both the 2.1 universal version and the 2.0 Huawei version, using option 1 for Mate P8 or option 6 for systemless.
I've downloaded a system root version of SuperSU (google "supersu system mode", first XDA thread) and flashed using TWRP, it says it has installed but the SuperSU app doesn't show root, and typing "su" in TWRP console doesn't show I can do commands in superuser mode. Can anyone help?
Click to expand...
Click to collapse
Hi,
Were you ever able to get your Mediapad M3 Lite 8 rooted? I really like this tablet but, need the 5 Ghz wifi band which requires root from everything I have read.
Thanks
howgies said:
Hi,
Were you ever able to get your Mediapad M3 Lite 8 rooted? I really like this tablet but, need the 5 Ghz wifi band which requires root from everything I have read.
Thanks
Click to expand...
Click to collapse
I have my Mediapad M3 Lite rooted by magisk.
I followed the unlock guide and unlocked the bootloader.
I couldn't find my exact firmware I downloaded the most recent one I could find.
I extracted the boot.img with Huawei Update extractor and copied it to my phone.
I download and installed latest magisk app.
I opened the magic app-> install -> install -> patch the boot image file which I then flashed through fastboot.
I then opened magisk -> install -> Direct install.
Everything works but like me you take a risk in not using the exact boot.img.
I tried and installed TWRP which worked but the volume keys would let me run the script I was trying to rebrand the phone. In the end it isn't necessary to root the phone.
sd26 said:
I followed the unlock guide and unlocked the bootloader.
I couldn't find my exact firmware I downloaded the most recent one I could find.
I extracted the boot.img with Huawei Update extractor and copied it to my phone.
Click to expand...
Click to collapse
Very bad idea and advice:
- people often uses wrong firmware or wrong version;
- a boot from a different version can be incompatible, you can be sure only too late!
The right thing is to boot to TWRP then in the console, using "dd" command do a copy of original boot!
nicolap8 said:
Very bad idea and advice:
- people often uses wrong firmware or wrong version;
- a boot from a different version can be incompatible, you can be sure only too late!
The right thing is to boot to TWRP then in the console, using "dd" command do a copy of original boot!
Click to expand...
Click to collapse
Very poor reply, you did not read my post properly, just jumped in to demonstrate your superciliousness. No advice was given and you missed the word risk. More productive use of replying would have been to include the actual command required anyway which is:
dd if=/dev/block/boot-device/by-name/boot of=boot.img
Helping wasn't the point your trying to make.
sd26 said:
Very poor reply, you did not read my post properly, just jumped in to demonstrate your superciliousness. No advice was given and you missed the word risk. More productive use of replying would have been to include the actual command required anyway which is:
dd if=/dev/block/boot-device/by-name/boot of=boot.img
Helping wasn't the point your trying to make.
Click to expand...
Click to collapse
if my reply is too poor, report it to mods...
A post like your IS an advice because people read and follow it. What is wrong is not that you write or my opinion but people behaviour
I read the "risk" word but a lot of people would not. This is also the reason I don't wrote the dd command: search and learn! Most of the messages you read here are of people who have broken their own terminal because just followed a post like your, without knowing what are doing.
N
sd26 said:
Everything works but like me you take a risk in not using the exact boot.img.
Click to expand...
Click to collapse
I see in your first screenshot the fingerprint-id menuentry is gone.... does your fingerprint-sensor working properly ?
I rooted my mediapad m3 lite 10 in the same way, but my boot-image is the right version. ( installed is BAH-W09C100B257, firmware downloaded with the huawei firmware finder app is exactly BAH-W09C100B257) . My fingerprint menuentry is gone too.....and the sensor doesnt work (with the working registered fingerprint before the rooting)
Marc
#marcg# said:
I see in your first screenshot the fingerprint-id menuentry is gone.... does your fingerprint-sensor working properly ?
I rooted my mediapad m3 lite 10 in the same way, but my boot-image is the right version. ( installed is BAH-W09C100B257, firmware downloaded with the huawei firmware finder app is exactly BAH-W09C100B257) . My fingerprint menuentry is gone too.....and the sensor doesnt work (with the working registered fingerprint before the rooting)
Marc
Click to expand...
Click to collapse
I did not have the fingerprint option activated so I checked it and found my sensor also does not work with the patched boot.img on. I could search and find the fingerprint menu entry but could not get it to operate. Reflashing the stock boot.img returned the sensor menu and fingerprint to normal but of course you lose root. More searching for solutions required.
Also I'm using the TWRP-3.2.1-bah-20180627.img recovery. The volume keys don't work so the hurupdater script I'd like to use aborts. Anyone got any other recovery for a CPN-W09C128B006?.
sd26 said:
I did not have the fingerprint option activated so I checked it and found my sensor also does not work with the patched boot.img on. I could search and find the fingerprint menu entry but could not get it to operate. Reflashing the stock boot.img returned the sensor menu and fingerprint to normal but of course you lose root. More searching for solutions required.
Also I'm using the TWRP-3.2.1-bah-20180627.img recovery. The volume keys don't work so the hurupdater script I'd like to use aborts. Anyone got any other recovery for a CPN-W09C128B006?.
Click to expand...
Click to collapse
I have
avkjbl5bak said:
Brand new here, looking to unlock, root and then flash a standard Android build or custom DeGoogled ROM for my new device. I was looking to find a way to unlock the bootloader to start and found that Huawei have stopped giving out unlock codes and that the info around unlocking wasn't great so I made a note of all my steps as below.
Please let me know if this works for you and if you have any issues, please also read and follow the guidelines carefully as there are lots of things like using all the applications as an administator and changing directories that are important.
I am also looking for a way to install TWRP or another recovery thing on this device so I don't brick it, as I want to root the tablet and muck around with it. Has anyone got any experience of doing this successfully and does anyone have links to methods to create a cloned backup of the standard OS?
This was done on a brand new Mediapad M3 Lite 8 (the Wifi version, not LTE) with Android 7.0, EMUI 5.1, CPN-W09, build CPN-W09C100B251 - BUT will probably work on the LTE version, the non-lite version and the 7 and 10 inch models.
IMPORTANT: This costs money and is done through the DC Unlocker tool, it costs 4 credits (4 euros/dollars) for the Mediapad M3 Lite 8 (Wifi, not LTE) as Huawei now do not offer the bootloader code AT ALL . I have copied/streamlined the steps below that were found as guides originally at the dc unlocker website, check their site guides to find originals.
Step 1 - Developer Options enable
Go to settings, about tablet, tap build number 7 times to unlock developer options
Go to developer options, enable OEM unlock, enable USB debugging
Step 2 - Enable manufacture mode
If your phone has a dialpad, enter dial pad code *#*#2846579#*#*
IF your phone doesn't have a dialpad, go to calculator and enter ()()2846579()()=
This willl take you to a developer menu, select "Project Menu", "Background settings", "USB ports settings", "Manufacture mode".
Step 3 - Install drivers
Connect your Android device to your PC with a usb cable and either install Hisuite from the connected drive that will attach, or download it from the Huawei website by searching for Huawei Hisuite and going to their official website.
To check this has worked, go to Device Manager on your PC and look for Modems - there should be an entry called Android Adapter Modem - if this is not present try disconnecting/reconnecting your device and restarting Hisuite.
Step 4 - Read bootloader code
Download the latest DC Unlocker tool from dc-unlocker dot com and extract it, then AS AN ADMINISTRATOR (right click and Run as Administrator) run the client.exe (was called dc-unlockerclient2.exe)
Click Select Manufacturer dropdown and change to Huawei Phones, not Modems, press the magnifier/search icon at bottom left and your phone info should be found. This should also
Step 5 - Buy credits from the dc unlocker site as a new user, try 4 credits first and then login with these new user details in the dc unlocker application on your PC, this will show your credits and the phone connected as well as the cost. Click the Unlocking icon on the top right and click Read botloader code to get your code. Make a note of this/copy it somewhere.
Step 6 - Go back to the folder that dc unlocker is in
Go into the unzipped folder and then copy the location of this folder by clicking on the address bar in File Explorer and copying this location, you'll have something similar to
C:\Users\ExampleUser\Downloads\dc-unlocker2client_1.00.1403
Step 7 - Turn off your phone and turn it back on holding the Vol down and Power buttons to enter fastboot mode, connect your device to your PC
Step 8 - Open cmd by searching for cmd in windows, right click cmd and open it as administrator, you'll get the black and white windows terminal
In the terminal type "cd C:\Users\ExampleUser\Downloads\dc-unlocker2client_1.00.1403" (or the path for the latest version of the dc unlocker you have downloaded) without the quotation marks and with YOUR directory path as described above. The command cd just changes directory to the one you give. Your terminal should now show the above directory as the path in which it now sends commands, i.e the > mark is now displayed after the directory path we copied
Step 9 - Type "adb devices" without quotation marks to start the adb daemon
Step 10 - Type "fastboot devices" without quotation marks and you should see a device number with the word fastboot next to it.
Step 11 - Now type "fastboot oem unlock" without the quotation marks, followed by a space and then your bootloader unlock code i.e
fastboot oem unlock XYZ123456789
Step 12 - Your device should show a screen asking you to accept the unlock, then onto another screen where you should press the power key to continue onto booting your factory reset unlocked device.
Step 13 - You might have to disconnect the USB cable and reboot your device now, and you'll set up the device from scratch again - but now the bootloader unlocked, allowing you to load stuff like TWRP if you can find the right version - which I can't right now! :good:
Click to expand...
Click to collapse
Did you ever get and answer to your question about cloning or getting the original factory images. I've been trying on and off for 9months. I have unlocked the bootloader and backed up using TWRP (from the 10inch model), but when I relocked the bootloader everything fell apart... unstable boot loops, etc. not sure if I had to wipe recovery I burned with TWRP or what. Also TWRP does not back-up the data partition I think due to encryption (from other posts I read). My goal was to rebrand a pile of the Chinese version tablets I have to US because we use them in our product, and the US are not available, so rebranding would give me more time before to find a replacement. Any clues would help!!!
sd26 said:
I did not have the fingerprint option activated so I checked it and found my sensor also does not work with the patched boot.img on. I could search and find the fingerprint menu entry but could not get it to operate. Reflashing the stock boot.img returned the sensor menu and fingerprint to normal but of course you lose root. More searching for solutions required.
Also I'm using the TWRP-3.2.1-bah-20180627.img recovery. The volume keys don't work so the hurupdater script I'd like to use aborts. Anyone got any other recovery for a CPN-W09C128B006?.
Click to expand...
Click to collapse
I successfully rooted my CPN-L09 without loosing fp sensor, have a look here: https://forum.xda-developers.com/mediapad-m3/help/to-patch-boot-img-magisk-v17-3-t3938629
Hi
im a new member but have been using the site for ages.
my mediapad m3 is also wifi only and im trying to get the code for the bootloader to be unlocked except for the fact that my calculator app isn't scientific enough (lol) to include brackets.
what do I do to get the code or update my calc app?
alex
bigprat9 said:
Hi
im a new member but have been using the site for ages.
my mediapad m3 is also wifi only and im trying to get the code for the bootloader to be unlocked except for the fact that my calculator app isn't scientific enough (lol) to include brackets.
what do I do to get the code or update my calc app?
alex
Click to expand...
Click to collapse
You have to use the calculator in landscape mode (turn on auto-rotate) and then the bracket buttons will appear.
So I finally got around to installing this on my stock version. I found 16GB was too limiting and I was hoping to use the SD card to expand the space so I could use it for a few more years. I purchased the code from DC_unlocker.
A couple of things I noticed while following the guide. To enter fastboot mode, holding down the volume down and power button doesn't seem to work. What you to do is while it's off, hold down the volume down button and plug in the microusb cable, while continuing to hold it down. You could also enter fastboot using an ADB command.
Also I couldn't wipe anything before installing the new roms, I got error messages. I'm not sure what that means. Anyways after installing android 9, it seemed to take a very long time to first boot. The graphic animation is going, but I wasn't sure if it was working so I hard reset once, tried to boot again and then waited again, hard reset again and put it down thinking I would have to look into the error messages and when I came back it was up and running.
Hi, I'm hoping someone can help me out here.
A few days ago, I followed the instructions unlocking the bootloader of my Mediapad M3 lite 8 (CPN-W09) and sure enough, I successfully unlocked the bootloader. However I've now run into another problem - I cannot get the FRP on the tablet to be unlocked!
Nothing I've tried seems to get it to unlock. The (only) Google account used on the tablet has been my own, and it's been no problem signing back into my account when factory resetting the tablet. One time when investigating it, after a factory reset it did say that it was "restricted" but again, adding my Google account details on the setup was no issue, but even after then deleting the account (which, if I'm right, should set FRP to "unlocked") when I enter into fastboot mode it still shows FRP as locked! And it shows it no matter what I do, wherever the Google account is "active" on the tablet or not, and the last four or five times I've did a factory reset with both data and cache partition wipes done and nothing budges. I think I'm at a lost cause here - the "OEM Unlock" option in the developer settings is totally greyed out. ?
Of course, the tablet is still "usable" but there is no way to carry out special functions after unlocking the bootloader, like rooting, install TWRP, custom ROM etc. and it just kinds of stands in a limbo.
I've tried searching here on XDA and the web in general, high and low, to see if this problem has affected anyone else, and strangely it doesn't seem to happen to anyone else!
For the record, I've also tried hardreset.info's FRP unlock tool which claimed to be successful, but it clearly wasn't!
I hope someone out there might have a solution to my woe - as I think I've partially crippled by M3 Lite 8 otherwise by trying to unlock the bootloader.
lawhec said:
Hi, I'm hoping someone can help me out here.
A few days ago, I followed the instructions unlocking the bootloader of my Mediapad M3 lite 8 (CPN-W09) and sure enough, I successfully unlocked the bootloader. However I've now run into another problem - I cannot get the FRP on the tablet to be unlocked!
Nothing I've tried seems to get it to unlock. The (only) Google account used on the tablet has been my own, and it's been no problem signing back into my account when factory resetting the tablet. One time when investigating it, after a factory reset it did say that it was "restricted" but again, adding my Google account details on the setup was no issue, but even after then deleting the account (which, if I'm right, should set FRP to "unlocked") when I enter into fastboot mode it still shows FRP as locked! And it shows it no matter what I do, wherever the Google account is "active" on the tablet or not, and the last four or five times I've did a factory reset with both data and cache partition wipes done and nothing budges. I think I'm at a lost cause here - the "OEM Unlock" option in the developer settings is totally greyed out. ?
Of course, the tablet is still "usable" but there is no way to carry out special functions after unlocking the bootloader, like rooting, install TWRP, custom ROM etc. and it just kinds of stands in a limbo.
I've tried searching here on XDA and the web in general, high and low, to see if this problem has affected anyone else, and strangely it doesn't seem to happen to anyone else!
For the record, I've also tried hardreset.info's FRP unlock tool which claimed to be successful, but it clearly wasn't!
I hope someone out there might have a solution to my woe - as I think I've partially crippled by M3 Lite 8 otherwise by trying to unlock the bootloader.
Click to expand...
Click to collapse
You could try to lock bootloader back, and before to unlock bootloader again, first just unlock OEM .
surdu_petru said:
You could try to lock bootloader back, and before to unlock bootloader again, first just unlock OEM .
Click to expand...
Click to collapse
I did try this at the time, and I couldn't get it to work. But I had another try at it yesterday and I managed to get the bootloader locked again, toggle OEM unlock to "off" and unlocked the bootloader once more and it worked!
So after doing this, I tried to get TWRP 3.3.1-1 flashed but it would stay frozen on the screen - I then read that I needed to install TWRP 3.2.0-0 first, install the August 2019 Lineage 16 firmware, then go back to the bootloader, flash TWRP 3.3.1-0, check everything was OK and then return to bootloader to finally flash TWRP 3.3.1-1. Success! I then flashed the latest Lineage OS 17.1 firmware along with Open Gapps (ARM64, Android 10, nano) and so far everything has worked OK. I just need to download all my apps again, but I'm sure it will give my CPN-W09 a new lease of life!
I used to do some rooting previously with Android handsets in the past, but the last time was two years ago (rooting & upgrading an Alcatel handset to Android 6.0) and FRP was new to me, throwing me off.
I've donated some Euros to you as an appreciation for your work & advice. Merci beaucoup!
lawhec said:
I did try this at the time, and I couldn't get it to work. But I had another try at it yesterday and I managed to get the bootloader locked again, toggle OEM unlock to "off" and unlocked the bootloader once more and it worked!
So after doing this, I tried to get TWRP 3.3.1-1 flashed but it would stay frozen on the screen - I then read that I needed to install TWRP 3.2.0-0 first, install the August 2019 Lineage 16 firmware, then go back to the bootloader, flash TWRP 3.3.1-0, check everything was OK and then return to bootloader to finally flash TWRP 3.3.1-1. Success! I then flashed the latest Lineage OS 17.1 firmware along with Open Gapps (ARM64, Android 10, nano) and so far everything has worked OK. I just need to download all my apps again, but I'm sure it will give my CPN-W09 a new lease of life!
I used to do some rooting previously with Android handsets in the past, but the last time was two years ago (rooting & upgrading an Alcatel handset to Android 6.0) and FRP was new to me, throwing me off.
I've donated some Euros to you as an appreciation for your work & advice. Merci beaucoup!
Click to expand...
Click to collapse
Thank you very much too
Hello
I followed the steps here to unlock the bootloader with my btv-dl09, that worked fine even its not lite.. :fingers-crossed:
but now, any clues? may i ll try the way of lawhec with
lawhec said:
So after doing this, I tried to get TWRP 3.3.1-1 flashed but it would stay frozen on the screen - I then read that I needed to install TWRP 3.2.0-0 first, install the August 2019 Lineage 16 firmware, then go back to the bootloader, flash TWRP 3.3.1-0, check everything was OK and then return to bootloader to finally flash TWRP 3.3.1-1. Success! I then flashed the latest Lineage OS 17.1 firmware along with Open Gapps (ARM64, Android 10, nano) and so far everything has worked OK. I just need to download all my apps again, but I'm sure it will give my CPN-W09 a new lease of life!
Click to expand...
Click to collapse
but cant find the TWRP 3.3.1-1?
may u Mean
[Recovery][Official] TWRP 3.3.1-10 [G97*0][Snap][3.Jan.20]
[Recovery][Official] TWRP 3.3.1-12 Snapdragon [N97x0][10.Nov.19]
[RECOVERY][ROOT]TWRP 3.3.1-1 Galaxy J6+/J610F/FN/G/DS
???
if so, why u choose one of these? No Clue for me^^ plz let me know
greetz
ADD: just found
Developed By :letschky
twrp-3.1.1-1-next.img
Jul 13, 2017 | 03:32PM
maybe these? looks pretty old but still working? Oo
So.. My Huawei P10 won't boot neither into system nor recovery, the screen is off and there's no LED indication.
It is recognized in fastboot, I can erase and flash both system and recovery, though rebooting the device does nothing, it just shows up in fastboot again, still with screen off.
Is there any way to save this phone? I installed a new battery too.
dc pheonix and hcu client did not help either.
:crying:
I have the same issue. Hard brick, doesnt turn on after I upgraded to oreo.
Guys, I have this issue, too and worked a bit with DC Phoenix support.
The reason why my P10 didn't boot anymore is simple: I just flashed the wrong firmware files for rolling back from Pie to Oreo.
Now I have a shiny black piece of junk.
I tried to flash with DC Phoenix, also with test point. The device was recognized as serial device, so the test point was working. But DC Phoenix failed at flashing.
DC support says, that Dec 18 security patches are preventing to flash old firmwares but DC needs to flash the original factory firmware, OTA isn't working.
So at the end of an 8 hour day trying to fix my P10 my result was a nice chat and a fast refund of my 19€ for DC pheonix.
If you can't get it working even with test point method, your phone is is a piece of junk.
Mostly it's caused by doing something wrong at downloading firmwares or flashing them, also while flashing wrong Magisk modules, Xposed or wrong boot images.
Since Pie don't have a boot partition anymore it's important to download a rollback firmware (2 files instead of 3) so the recovery is able to reformat before flashing.
Jannomag said:
Guys, I have this issue, too and worked a bit with DC Phoenix support.
The reason why my P10 didn't boot anymore is simple: I just flashed the wrong firmware files for rolling back from Pie to Oreo.
Now I have a shiny black piece of junk.
I tried to flash with DC Phoenix, also with test point. The device was recognized as serial device, so the test point was working. But DC Phoenix failed at flashing.
DC support says, that Dec 18 security patches are preventing to flash old firmwares but DC needs to flash the original factory firmware, OTA isn't working.
So at the end of an 8 hour day trying to fix my P10 my result was a nice chat and a fast refund of my 19€ for DC pheonix.
If you can't get it working even with test point method, your phone is is a piece of junk.
Mostly it's caused by doing something wrong at downloading firmwares or flashing them, also while flashing wrong Magisk modules, Xposed or wrong boot images.
Since Pie don't have a boot partition anymore it's important to download a rollback firmware (2 files instead of 3) so the recovery is able to reformat before flashing.
Click to expand...
Click to collapse
were you able to send flash erecovery through adb ? or did it show success read and failed write?
thank you
NowLearn said:
were you able to send flash erecovery through adb ? or did it show success read and failed write?
thank you
Click to expand...
Click to collapse
For adb it’s needed that the phone starts completely into system or twrp - both not possible for me.
With fastboot it’s not possible to flash eRecovery, just recovery.
Jannomag said:
Guys, I have this issue, too and worked a bit with DC Phoenix support.
The reason why my P10 didn't boot anymore is simple: I just flashed the wrong firmware files for rolling back from Pie to Oreo.
Now I have a shiny black piece of junk.
I tried to flash with DC Phoenix, also with test point. The device was recognized as serial device, so the test point was working. But DC Phoenix failed at flashing.
DC support says, that Dec 18 security patches are preventing to flash old firmwares but DC needs to flash the original factory firmware, OTA isn't working.
So at the end of an 8 hour day trying to fix my P10 my result was a nice chat and a fast refund of my 19€ for DC pheonix.
If you can't get it working even with test point method, your phone is is a piece of junk.
Mostly it's caused by doing something wrong at downloading firmwares or flashing them, also while flashing wrong Magisk modules, Xposed or wrong boot images.
Since Pie don't have a boot partition anymore it's important to download a rollback firmware (2 files instead of 3) so the recovery is able to reformat before flashing.
Click to expand...
Click to collapse
Yes, I tried the same, and also got the security patch warning, though little did I know I could get a refund. I did not try the 'test point' method. Not sure if I get it, do you connect/solder usb-cable onto the phone's motherboard?
You need to connect the test point to ground, you can use the shielding right beside of it. Take a small wire or tweezers for it.
I did it like this:
- connect the phone to pc, it should be recognized as fastboot device
- Short test point with ground
- hold down the power button until the computer recognizes the device again
- install the serial driver
DC should work now. But if it doesn’t, write it in the dc forums and you’ll get refund
Huawei P10 Successfully Recovered from Fastboot black screen on latest Security 9.
Alham Do Lillah With the help of Allah Almighty today I successfully recovered my p10 from black display stuck in fastboot mode on latest Security 9..
I used 2 tools
1: Dc phoenix
2: chimera
chsaim said:
Alham Do Lillah With the help of Allah Almighty today I successfully recovered my p10 from black display stuck in fastboot mode on latest Security 9..
I used 2 tools
1: Dc phoenix
2: chimera
Click to expand...
Click to collapse
Can you explain exactly how?
Jannomag said:
Can you explain exactly how?[/QUOTE
you need to know exactly build number and flash latest firmware according to build number with chimera tool.
make sure that phone is in fastboot mode... am sorry if i cant explained well ... for more details write me at [email protected]
Click to expand...
Click to collapse
Yes, please share some information how can we recover our dead p10. It would greatly help the community. Thank you
I tried it with DC and Chimera. Both aren't working for me, because of the security patches. Huawei did some deep changes between October and December 2018 and made it very hard to flash even with test points - another reason for me to leave Huawei to my alltime smartphone enemy Samsung...
The DC-Phoenix and Chimera teams are working hard on a solution, take a look at their forums and you'll notice that many people have this problems, just because Huawei ****ed it up.
I mean, we did all something wrong, otherwise this threat won't exist. But Huawei made it hard for us to revive the devices and this reminds me of Apples politics. Huawei doesn't need to give support to unlocked phones but it's very unfair to prevent their customers from doing what they want including unlocking.
Back to topic:
Follow the forums of DC and Chimera. If you found any solution or fix, please post it here.
My device, also bricked while flashing the wrong firmware for rolling back from pie, shows just black screen and fastboot is working.
Test point didn't work, also Chimera couldn't flash anything.
My device gets quiet warm while in fastboot, so I disconnected the battery to prevent deep discharging.
Dear the same situation was happened with my p10 but i recovered... So if you want to recover your phone then give ultra view id and pass....... If you have chimera and dc phoenix you can make it possible.. But remember you must need to know exactly build number
If any one needs my help here is my WhatsApp contact me anytime... +923007969629
If you can share the steps. It would help the community thank you @chsaim
Yes, please share the steps to help the community.
Thanks!
There's absolutely no reason for not sharing the steps in a simple tutorial. Instead @chsaim is begging for remote access to our computers, I don't know why.
I chatted a lot with Chimera support and they told me that there's currently not way to recover, with faulty partitions caused by flashing, with the Dec.2018 security patches and newer. This included the firmware 382, on some 380 devices it doesn't work either.
They also want to send me an E-Mail when they find a solution for this. For now I got my money back from them - great support, also the DC team.
I'm happy to get a used mainboard from local market and now have my P10 as spare phone.
yeap.same **** again with Huawei phones.ı want to try pie rom and when ı try rollback oreo phones turn off and not open again.this is not like a other hard or soft brick problem because I have a experiance about other problems.phone cant charge or pc can't see the device ı cant see red led too.just dead.ı use this phone 2 years but never buying huawei again neverrrr.anybody found a solition ?
Jannomag said:
You need to connect the test point to ground...
- connect the phone to pc, it should be recognized as fastboot device
- Short test point with ground
- hold down the power button until the computer recognizes the device again
- install the serial driver
...
Click to expand...
Click to collapse
Testpoint should be connected till pc recognize it properly or connected all the time during flashing? Do you have any logs at what point dc crashed in your case?
lukastob said:
Testpoint should be connected till pc recognize it properly or connected all the time during flashing? Do you have any logs at what point dc crashed in your case?
Click to expand...
Click to collapse
I can access fastboot with dc-phoenix. Once I tried to send erecovery, recovery, or kernel w
Through cmd. It reads but it can't write. That's where I get stuck. If dc it's able to write then I would be able to recover my dead phone. Thank you
lukastob said:
Testpoint should be connected till pc recognize it properly or connected all the time during flashing? Do you have any logs at what point dc crashed in your case?
Click to expand...
Click to collapse
Test point needs to be shorted until the computer recognizes the P10 as an USB serial device. You need drivers for this, which you can get from DC Phoenix.
DC couldn't flash the bootloader:
Code:
BOOTLOADER File to update: Kirin960_T0_A7.0_V1
20.02.2019 21:34:26 Starting to write device...
Writing bootloader...
Error writing Bootloader
20.02.2019 21:35:36 Writing device finished - INCOMPLETE
Damn, it's been a while since I was here. Back then it was mostly about Windows PDAs.
Disclaimer:
Your warranty after this process is void and your phone will tell you it can not be trusted because it's unlocked.
This is what worked for me. I did it on Windows 10. I just went through the process and it was a bit of mixing and matching various guides.
I'm not your tech support, the only one responsible for following this is you.
If any part of this guide doesn't work for you: too bad. Maybe Google or other users can help you with your problem.
Needed:
An internet-enabled PC
Huawei P10 Lite phone
USB to Micro-USB cable
HiSuite https://consumer.huawei.com/en/support/hisuite/
DC-Unlocker (comes with abd & fastboot) https://www.dc-unlocker.com/
Optional: Huawei Driver Tools https://mega.nz/file/qrpBUIKA#zaI8Th0ovgyK48VzFUFAzMNWF2r_R12lNc-uJZsIx4w
Note: I recommend not to buy credits until you've come to the part in my guide which says buy credits.
Install HiSuite
Unzip and install HiSuite on your PC
Start it at the end of the installation (it should show a button with "Start")
Connect the phone to your computer with the USB cable and follow the instructions in HiSuite to install HiSuite on your phone
At the bottom of the (Windows) HiSuite there's an option to do a System Upgrade, mine had the option to install an older version (Android 7 with EMUI 5.1) Install this. (This will take some time)
Note: I've read that some people couldn't downgrade because of modern security fixes. It's possible I didn't run the latest updates, but as far as I'm aware everything was up to date.
The following part might be annoying because HiSuite tries to connect to the phone. I uninstalled it at this point, but I had the Driver Tools installed (and did the Install within said tools).
Phone
Once the phone restarted, go through the set-up as quickly as possible (skip WiFi-setup, decline all optional things and skip account creation)
Go to Settings > System > About Phone > Keep tapping the "Build Number" until you're told you're a developer
Find the developer options (Usually in Settings > System and enable USB/ADB debugging
Open the telephone app and type: *#*#2846579#*#* (it should open a menu automatically after the last *)
Click Background Settings > USB Port Settings and select Manufacture Mode
Once Manufacture Mode is selected, leave the phone untouched
DC-Unlocker, part 1
Unzip the contents of the DC-unlocker zip
Start dc-unlocker2client.exe
In the top left, under "Select manufacturer" change "Huawei modems" to "Huawei phones"
Click the button with the magnifying glass, if you did the previous step hovering should say "Detect phone" on hover
Example out put (this might differ for you, but triple-check a port is detected):
Code:
DC - Unlocker 2 Client 1.00.1431
Detecting phone :
selection :
manufacturer - Huawei phones
model - Auto detect (recommended)
Found Applications port COM3
Model : Huawei HiSilicon Kirin Android phone
Serial NR. : [redacted]
Firmware : System 5.1.0.78(0VVV)
DC-Unlocker, part 2
Check again if a model and port is shown in both the output and above the big buttons.
In the top right, click About > Buy Credits
DC-Unlocker site
Select your payment processor
By default it creates a new account, unless you've used this service before, you probably want to keep it this way.
Fill in a username and an email address
You need 4 credits (€4 for me) at the time of writing this, but do check the link "How much do I need?"
Hit confirm and go through the payment process, wait until everything is processed (if you use a script blocker, you might want to temporarily disable it).
At the end you should get confirmation page with your username, a password and 4 credits. (Username and password will be mailed too.)
DC-Unlocker, part 3
Go back to DC-Unlocker
In the top right, click "Server" and enter the details you've gotten
Click "Check login" and see if the output window shows your username and the credits you have left (which should be 4 at the time of writing)
In the top right, click "Unlocking" and then click "Read bootloader code"
The output should show you the bootloader code once it's done. Copy this to a textfile and save it (and keep it in the memory).
You can close DC unlocker once you've saved the code.
Don't be lazy and try to copy/paste the commands following in the next section, since you want to keep the code in your memory, as seen in step 6. Besides, I'll show you some shortcuts anyway! Keep in mind that our example code is 1111222233334444 (yours most likely isn't, mine sure wasn't) and that [tab] will mean the tab-key on your keyboard.
PowerShell/Command Prompt
In the folder where you unzipped dc-unlocker2client.exe to, press [shift] on your keyboard and hold it while right-clicking in an empty area underneath the files, then click "Open PowerShell (or command prompt) here".
Whatever command-line you started will open, type ad[tab] and adb.exe should be appear (shows up as .\adb.exe in PowerShell)
Follow this by typing reboot bootloader. So it should show as
Code:
./adb.exe reboot bootloader
(no ./ in command prompt)
Hit [enter] and the phone should reboot to a screen with a white background
Once the bootloader screen shows (white background with the android mascot) type fast[tab] in PowerShell/Command prompt and follow it up by oem unlock[space]
If you still have the bootloader code in memory, right-click in PowerShell/Command prompt to paste it. Your entire line should be
Code:
./fastboot.exe oem unlock 1111222233334444
Hit [enter], the unlocking will start and factory reset your phone. My output was:
Code:
(bootloader) The device will reboot and do factory reset...
OKAY [ 10.330s]
If everything went right you'll see the Huawei/Android bootscreen and then a warning that the phone is "unlocked and can not be trusted" to use or something like that. It'll boot into the OS after that.
I'd like to remind you of the disclaimers at the top, but hopefully this will help some of you going through the process.
Edits
Forgot about USB debugging
Added the warning you get after a successful unlock
Changed the build number tapping sentence
Rewrote a sentence for clarity
Very nice guide, if ppl ask about unlocking we just link this from now on...
This is a very helpful guide, thank you so much! My question is, if I wanted to flash twrp when the bootloader is unlocked, is there a way to upgrade it to Oreo once again without locking the bootloader again? I can't seem to find a twrp tutorial where they use Nougat/Emui 5 to flash twrp, and all the tutorials to upgrade to Oreo/Emui 8 look like they're locking the bootloader once again and I don't really want to waste 4 euros to go back to the start.
A bootloader unlock should be permanent? I've been moving between Android 7 (EMUI 5), Android 8 (Emui 8) and Android 10 myself in all kinds of directions.
Besides, I think the code is tied to your device, so you should be able to use it again. (But I'm not sure about this!)
Syrion said:
A bootloader unlock should be permanent? I've been moving between Android 7 (EMUI 5), Android 8 (Emui 8) and Android 10 myself in all kinds of directions.
Besides, I think the code is tied to your device, so you should be able to use it again. (But I'm not sure about this!)
Click to expand...
Click to collapse
Thank you for your quick reply! So after the bootloader unlock, did you flash twrp on Android 7? or did you upgrade your phone to Android 8 and flash twrp then? How did you manage to upgrade it to Android 8?
I really appreciate your help with the previous tutorial, I've done everything until the buy credits part (I'm waiting a bit for that part) and I'm planning on getting to the end of the tutorial at least before August. My idea is to upgrade to Android 8 + flash twrp and Magisk, hopefully I'll be able to do all of that!
I did the above procedure on an up to date, official stock Huawei android. Both EMUI & Android are 8. I'm in the Netherlands, so it'should be the same model as in Spain. (WAS-LX1A)
The HiSuite step is to downgrade from EMUI 8 (Android 8) to EMUI 5 (Android 7), since that seems to have less securities to make it easier to unlock the bootloader.
Oh, I understand now! One more question (sorry if I'm being annoying, it's my first time playing with a Huawei, I must say that Samsungs are far easier to root/unlock lol): If I follow your method, but after getting the bootloader unlock code and right before unlocking the bootloader, I use HiSuite to upgrade back to Android 8/Emui 8, would the procedure be fine? like, it's totally fine to unlock the bootloader either with android 7 or 8, the only time I need android 7 is to get my code because DC unlocker supports them better, right?
Again, thank you so much!!!
I'm not sure to be honest. But I reverted to 7/EMUI 5 because I read around here on the board that's better for trying to unlock.
Thank you,
Only fastboot.exe oem unlock xxxxx failed with the following error: FAILED (remote: Command not allowed)
finished. total time: 0.022s
This was resolved by going back to settings, developer options and check 'enable oem unlocking'. I didn't read that in your guide.
Syrion said:
I did the above procedure on an up to date, official stock Huawei android. Both EMUI & Android are 8. I'm in the Netherlands, so it'should be the same model as in Spain. (WAS-LX1A)
The HiSuite step is to downgrade from EMUI 8 (Android 8) to EMUI 5 (Android 7), since that seems to have less securities to make it easier to unlock the bootloader.
Click to expand...
Click to collapse
Hi, I have the same model. But I can't figure out how to update to EMUI8 again (or which custom recovery works). It doesn't find the update in HiSuite and it doesn't find it via System update. Do you happen to know how? Thank you.
What should I do next?
I did manage to unlock the bootloader thanks to this very clear post. I did downgrade to Android 7 / Emui 5.1.1 and have a working rooted system but he is trying to upgrade again to android 8 / Emui 8. I know by experience that it will lock again with the higher version (the unlock code can be used several time fortunately).
I did try to flash some roms on it, going for instance to Lineage OS 14 but it was all a disaster and I think that I need some guidance now..
I am not a newbee for rooting and flashing but do not understand yet the Huawei system; is that so that I have to choose a new ROM with caution, especially with the Emui version? Looking at the old posts, I find some old ROM's even with Emui 5 version but do not understand the path that I should follow to progressively upgrade.
Thanks in advance for your orientations!
Syrion said:
A bootloader unlock should be permanent? I've been moving between Android 7 (EMUI 5), Android 8 (Emui 8) and Android 10 myself in all kinds of directions.
Besides, I think the code is tied to your device, so you should be able to use it again. (But I'm not sure about this!)
Click to expand...
Click to collapse
For me, I did get to relock by accident but I confirm that the unlock code is permanent (at least, I did use it 3 times with no problem!)
P10 lite Pinout
I would like to know if they have tried to unlock the bootloader with the Pinout method.
Correcaminos604 said:
I did manage to unlock the bootloader thanks to this very clear post. I did downgrade to Android 7 / Emui 5.1.1 and have a working rooted system but he is trying to upgrade again to android 8 / Emui 8. I know by experience that it will lock again with the higher version (the unlock code can be used several time fortunately).
I did try to flash some roms on it, going for instance to Lineage OS 14 but it was all a disaster and I think that I need some guidance now..
I am not a newbee for rooting and flashing but do not understand yet the Huawei system; is that so that I have to choose a new ROM with caution, especially with the Emui version? Looking at the old posts, I find some old ROM's even with Emui 5 version but do not understand the path that I should follow to progressively upgrade.
Thanks in advance for your orientations!
Click to expand...
Click to collapse
I ran into the same problem. Did you find a solution?
I followed this guide, downgraded to EMUI 5.1.1 and tried to install several custom ROMs. But none of them will boot. It is always stuck on the splash screen with the "bootloader unlocked" warning and doesn't get any further.
I tried installing LineageOS 17.1, 15.1, and RR on Android 9 but no luck on any of these. Also, is it possible to revert back to the stock ROM? Maybe that will help...
Thank you all for any help
Nothing unfortunately, I did finally reinstall Android 7 with HWOTA https://www.******.com/huawei-hwota-tool-for-huawei-devices/ and managed to have a working Android 7 / Emui 5 that works perfectly if you do not forget to make a complete wipe/reset when rebooting. The bootloader is still unlocked.
Strange enough this system is upgradable through the normal update system (parameter/system/update) and keeps the unlocked bootloader. Today, I did upgrade to a very last built today - 394(C432) - without problem. Apparently I just have to re-root it through trwp.
I keep it like this now, finally, the Huawei system is not bad! and it is yet rooted
be-rty said:
I ran into the same problem. Did you find a solution?
I followed this guide, downgraded to EMUI 5.1.1 and tried to install several custom ROMs. But none of them will boot. It is always stuck on the splash screen with the "bootloader unlocked" warning and doesn't get any further.
I tried installing LineageOS 17.1, 15.1, and RR on Android 9 but no luck on any of these. Also, is it possible to revert back to the stock ROM? Maybe that will help...
Thank you all for any help
Click to expand...
Click to collapse
Correcaminos604 said:
Nothing unfortunately, I did finally reinstall Android 7 with HWOTA https://www.******.com/huawei-hwota-tool-for-huawei-devices/ and managed to have a working Android 7 / Emui 5 that works perfectly if you do not forget to make a complete wipe/reset when rebooting. The bootloader is still unlocked.
Strange enough this system is upgradable through the normal update system (parameter/system/update) and keeps the unlocked bootloader. Today, I did upgrade to a very last built today - 394(C432) - without problem. Apparently I just have to re-root it through trwp.
I keep it like this now, finally, the Huawei system is not bad! and it is yet rooted
Click to expand...
Click to collapse
Is 394(C432) finally coming as OTA? Back in July I had to download it via firmware finder and flash it with HWOTA after unlocking the bootloader... lol just to relock after updating... However even Huawei support didn't know about 394 and denied it would even exist, not too surprising in hindsight! Still eversince I was wondering if it ever comes as simple OTA, which indeed seems the case eventually!
Sent from my Google Pixel 3 XL using XDA Labs
Yes, WASLX1A 8.0.0.0394(C432) did arrive as OTA around the end of October. I was surprised as I did not expect any new update on this phone!
Sam Nakamura said:
Is 394(C432) finally coming as OTA? Back in July I had to download it via firmware finder and flash it with HWOTA after unlocking the bootloader... lol just to relock after updating... However even Huawei support didn't know about 394 and denied it would even exist, not too surprising in hindsight! Still eversince I was wondering if it ever comes as simple OTA, which indeed seems the case eventually!
Sent from my Google Pixel 3 XL using XDA Labs
Click to expand...
Click to collapse
DC-Unlocker can't find my phone
I followed your instructions, but when I click the magnifying glass on DC-unlocker it says
===================================================================
DC - Unlocker 2 Client 1.00.1431
Detecting phone :
selection :
manufacturer - Huawei phones
model - Auto detect (recommended)
Found Applications port COM6
===================================================================
But then nothing else is listed .....
My model is WAS-LX1
Correcaminos604 said:
Yes, WASLX1A 8.0.0.0394(C432) did arrive as OTA around the end of October. I was surprised as I did not expect any new update on this phone!
Click to expand...
Click to collapse
Yeah, it's actually crazy cool that it was patched after all this years, I however read it was primary updated to support the coronavirus warning App framework! That's actually the reason for Huawei to push another last update!
Sounds like a crazy conspiracy theory but was written on their Homepage...
Sent from my Google Pixel 3 XL using XDA Labs
Downgrade option doesn't exist for me in Hisuite. My phone is WAS-LX2 8.0.0.370(C185). The last update I got was on 13 February 2019 with the 2019 Feb security patches. Is there a free way to unlock bootloader?