Related
Ok so I have been looking around for two days now and have not been able to find an answer to my problem. I've even searched and tried everything on these forums so please don't ask me to google or use the forums search.
I've got a Bell Canada Samsung Galaxy S GT-I9000M, it was working fine a few days ago and I picked it up to check my messages and it was frozen. After a few minutes I pulled the battery and went to restart the phone.
The phone will now only show the Samsung Galaxy S white logo and simply restart itself and play that logo over and over. If the phone is plugged into the wall it will show the battle charge logo briefly and than restart to the logo. It will go no further than this point.
I have tried to do a factory reset via Home + Power + Vol Up but it seems to reset itself before it will actually load into that menu. Home + Power + Vol Dn will bring me to the download screen which is stable and will not reset the phone.
This is where it gets strange, I have tried Odin and a 100% stock flash on the phone with no luck the phone just sits resetting. After a download of DarkyROM it will actually load the white Galaxy S logo along with the DarkyROM logo and simply go back to resetting.
So the phone is clearly in some state of a working order able to download and accept ROMs but just keeps restarting itself after the white initial Galaxy S logo.
Any and all help would be appreciated! I hope I have explained this problem well enough, maybe it is in need of being brought to a shop to be fixed? Just happens that the warranty expired last week, almost seems coincidental.
Thanks!
After you installed DarkyRom (or any other ROM with CWM), did you try re-entering the recovery menu? Perhaps you will now be able to enter recovery?
tptp said:
After you installed DarkyRom (or any other ROM with CWM), did you try re-entering the recovery menu? Perhaps you will now be able to enter recovery?
Click to expand...
Click to collapse
No, after the install of the ROM it would load up the white galaxy logo along with the DarkyROM logo and than just go back to resetting itself over and over. I could still go back to to the download but not access the reset menu.
Knagar said:
No, after the install of the ROM it would load up the white galaxy logo along with the DarkyROM logo and than just go back to resetting itself over and over. I could still go back to to the download but not access the reset menu.
Click to expand...
Click to collapse
run through My Android Solutions, link below and do the first step after that to immediately to recovery or download mode , than flash a rescue or resurrection kit from My Android collections, link below, all this done without sim card or exts SD card inserted
None of this has worked, I have tried every trick I can find on the net but I can't seem to get it to go.
As before the phone will go into download mode, will accept roms and so on as shown by the DarkyROM logo showing up and going away with the removal of it.
After every attempt I am still not able to get into recovery mode but am still able to access download mode. The phone seems to be in some state of working order but continues to reset itself only when turned on but will run stable in download mode.
ADB doesn't see the device and even if it did I think it would still just reboot once it started into recovery.
It's almost as if the phone starts and after it shows the starting Galaxy S GT I9000 it just turns itself off for some reason
Is their any way to totally reformat the phone and start 100% from scratch without getting into recovery to do factory reset?
Step by step instructions on what to do and download for Odin would be fantastic. I am still not sure 100% on what the PIT/Bootloader/PDA/Phone/CSC are or do so the files I need to put in those and a good explanation would be great!
This happens sometime. To fix, Do this.
1. Boot into download mode.
2. Flash stock ginger bread with Odin using 512 pit.
3. Now boot into recovery and wipe data/factory reset.
4. Boot again into download mode.
5. Flash devil or semaphore kernel.
5a note. Your phone doesn't need to be able to boot. All we need is recovery mode.
6. Boot into the new recovery and wipe data/factory reset.
7. Format /system.
8. Flash ROM / gapps etc.
9. Boot with success.
10. Happy dance time, brings good luck.
Sent from my GT-I9000 using xda premium
Knagar said:
Step by step instructions on what to do and download for Odin would be fantastic. I am still not sure 100% on what the PIT/Bootloader/PDA/Phone/CSC are or do so the files I need to put in those and a good explanation would be great!
Click to expand...
Click to collapse
ok, try flashing a gingerbread Ezboot loader, visit My Android collections, link below, has complete guide at download page
Well I've tried both suggestions with no luck. I am starting to think it's some sort of hardware problem which I can't understand because it is 100% stable and won't reset in download mode. It will accept ROMs and so on but instantly just starts to restart itself after the first logo is shown. No work around will let me into recovery mode and no method I have found so far will just reload how the phone boots. I guess it's time for a new phone eh chaps?
Knagar said:
Well I've tried both suggestions with no luck.
Click to expand...
Click to collapse
hmm, its strange..anyway, you should remove SIM Card and Ext SD card, and try to use any tool from My Android Collection, to format the Internal SD card and flash a 2e recovery to see , if you can get your recovery back or even a i9000 rescue kit would be good to go after formating your Internal SD card
Formatting you Internal SD card, will resolve any settings, data, delvik cache etc that would be the cause of your initial problem.. there are formatting tools as well a recovery tools that can be used to achieve this
Did u flash the correct stock firmware for ur I9000M? try this http://www.hotfile.com/dl/162558059/7efd7bc/I9000UGKG3_I9000BMCKG3_VMC.zip.html.
Source : http://www.sammobile.com/firmware/?page=3&model=GT-I9000M&pcode=0&os=1&type=1#firmware
Ok progress is being made, first I used Odin to load I9000UGKG3-I9000BMCKG3_VMC in the PDA slot without doing a reboot. Then I loaded JPK_Root_Recovery_2e using just the i9000_Kernel and was able to boot recovery.
After doing a Wipe Cache and then Factory reset the phone went back to a boot loop and I was unable to get back to the recovery menu.
After repeating the first steps I am once again in the recovery mode with no boot loot but am unsure as to where to go from here.
Currently the screen reads
Android system recovery <2e>
Samsung Recovery Utils
- for BML -
reboot system now
apply sdcard:update.zip
wipe data/factory reset
wipe cache
-------------------------------------------------
E: Invalid command argument
-- Install from package...
Finding update package...
Opening update package...
# Manual Mode #
--Appling Multi-CSC...
Installing Multi-CSC
multicsc : src /system/csc/BMC/system/ .
*EDIT* Seems once you restart from the recovery mode it goes right back to a boot loop, was not able to apply the SD card update either. So getting to recovery is currently a one time deal without having to go back and reload VMC and 2e. Once restarted all is lost.
You will need to flash another firmware with 3 file method @odin. Search on this forum a firmware and flash it!
Don't worry, u can't brick your phone that easily. I flashed my phone 10times in a day, for boot loops, when i tried to upgrade to 4.0.4
Sent from my GT-I9000 using xda premium
Ok so this time I used Odin to do VMC in the PDA slot, then I9000 Kernel went back to VMC and loaded that then when I restarted the phone it went back to the same boot loop.
I have no way to clear the internal SD or anything like that because the programs will not see my phone connected to my PC.
What could be causing my phone to just continue to restart?
Knagar said:
Ok so this time I used Odin to do VMC in the PDA slot, then I9000 Kernel went back to VMC and loaded that then when I restarted the phone it went back to the same boot loop.
I have no way to clear the internal SD or anything like that because the programs will not see my phone connected to my PC.
What could be causing my phone to just continue to restart?
Click to expand...
Click to collapse
I gave u a source, download the guide on flashing through odin. It should work. Dun flash 1 file by 1 file.
EDIT : u can find more firmwares here. http://forum.xda-developers.com/showthread.php?t=1102881&page=1
Pm me if you need any help!
Ok so here is where I am at..
I have tried everything everyone has listed so far. The only think that has made any sort of progress at the moment is going into download mode, connecting to the USB after loading Odin. Using JPK_Root_Recovery_2e I9000_Kernel.tar will bring me to the recovery screen.
wipe cache partition + reboot = boot loop
wipe cache partition + wipe data/factory reset + restart = boot loop
wipe data/factory reset + restart = boot loop
Any of the above mentioned plus loading stock firmware results in a boot loop.
Any of the above mentioned plus loading DarkyROM Resurrection 10.2 will again show the Galaxy S I9000 Logo plus the DarkyROM logo and proceed to boot loop.
Clear cache and factory reset than load of i9000XXJVT pit/pda/modem/csc results in boot loop.
If I am missing something please explain in detail and not shunt me off to some other page.
As before I have tried everything mentioned with no luck at getting past this boot loop. Clearly the phone is able to accept roms and so on so the internel SD seems to be ok but the boot sequence seems scrambled. Strange that it will boot to download and boot to recovery with JPK but upon restart it just boot loops and without Odin and JPK I can only get back to download mode.
Seems to me you also have some partition woes. Try to find an older rom (Milky's worked for me) that requires re-partitioning to be done. Flash via ODIN, wait for 10-15 mins for whole process to complete. CWM flash any rom from there ... (Darky's Extreme also repartitions)
Hello everyone,
I just hardbricked my SGS+ and now I'm a bit curious how this could happen.
This is what I did:
I used to run CM9 RC5 from arco68 along with the Kernel for ICS from Christopher83 and CWM 6.0.1.2.
Because my phone always lost the wifi-connection and also had some freezes I decided to try out CM10 Beta 3 from ivendor.
I backuped my phone, downloaded the zips and even verified the MD5sums. Next I flashed CWM 6.0.1.9 as recommended in the thread from ivendor.
After exporting the nandroid backup and other stuff like photos to my computer I wiped everything as mentioned in the thread, flashed the two zips and rebooted. Everything went fine and I was almost ready with setting up my phone again when I got my first softreboot.
Suddenly it showed the CM-bootlogo and after maybe 10 seconds I was back on my homescreen. I got another two or three softreboots until I decided to flash the Kernel 3.x from CastagnaIT.
I rebooted into recovery, wiped cache and dalvik cache, flashed the zip and rebooted.
Now I wanted to reboot into recovery again to fix permissions but instead I got a softreboot and my phone stuck at the CM10 bootlogo.
I waited for around 5 minutes and then I just turned the phone off and booted into the recovery mode.
Because I wanted a clean install without any problems like softreboots I decided to wipe my phone again (data, cache, system) and just reflash the zip for CM10. And at this point everything went wrong.
I flashed CM10 but when I tried to flash gapps my phone just turned off. And no, the battery was not empty. In fact the battery was at around 50-60% and my phone was also connected to my computer.
I tried to turn on my phone but now it stuck at the Samsung bootlogo.
The next thing I did was probably a horrible mistake. I tried to un-brick my phone but I did not realize that I could boot into download mode without problems so I guess my phone wasn't softbricked at all.
Well, after that I still stuck at the Samsung bootlogo and couldn't enter recovery mode. I got into download mode somehow and maybe this was my second mistake. I tried to flash the "i9001Reset.zip" via Odin. Everything went fine but when Odin said "Close serial port and wait until rebooting" my phone was completely dead. I think it was while I tried to flash the reset-file when I got a message like "MBR: read failed". So somehow I managed to destroy my master boot record.
Now I can't turn on my phone or enter download nor recovery mode. I already removed the battery for about 45 minutes but this didn't work either.
My phone is dead but at least I saved the important data and maybe I'll get a new one through warranty. Or I just buy a Nexus 4.
My questions are:
What did I do wrong especially when I tried to save my phone?
How can I prevent such things from happening?
And at which point I should have got help here in the forum or elsewhere?
I would really appreciate some tips for the future because I already flashed and used a lot of different ROMs but this is the first time something really went wrong.
Thanks for reading and thanks for your help in advance.
(Please excuse my non-perfect englisch.)
Greetings,
Mangoniter
Hi.
Since yesterday my galaxy s3 lte i9305 does not boot anymore, the blue cyanogenmod logo keeps turning for hours. I can however still go to the recovery (which was a few month old cwm). I completely wiped the phone (both caches, data, internal sd, boot, firmware etc ... all but the modem) and reinstalled the newest cwm and the newest nightly build three times now using heimdall and the external sd (connected my external micro sd to my computer sd card reader via adapter and put the zip on it). Just now I installed twrp-2.8.5.0-i9305 as a new recovery and installed everything again, but everytime - and also now - despite the seemingly successful installation, the phone is stuck at the cyanogen bootlogo.
Any ideas on how to get my phone running again?
Cheers
ScPo said:
Hi.
Since yesterday my galaxy s3 lte i9305 does not boot anymore, the blue cyanogenmod logo keeps turning for hours. I can however still go to the recovery (which was a few month old cwm). I completely wiped the phone (both caches, data, internal sd, boot, firmware etc ... all but the modem) and reinstalled the newest cwm and the newest nightly build three times now using heimdall and the external sd (connected my external micro sd to my computer sd card reader via adapter and put the zip on it). Just now I installed twrp-2.8.5.0-i9305 as a new recovery and installed everything again, but everytime - and also now - despite the seemingly successful installation, the phone is stuck at the cyanogen bootlogo.
Any ideas on how to get my phone running again?
Cheers
Click to expand...
Click to collapse
I would try a factory reset from recovery and see if that helps. You did check the md5 for your downloads right?
Otherwise I would install the stock rom, then try again, this time(making sure you have a compatible recovery) just wipe caches, data, and format system, and then install CM
noppy22 said:
I would try a factory reset from recovery and see if that helps. You did check the md5 for your downloads right?
Otherwise I would install the stock rom, then try again, this time(making sure you have a compatible recovery) just wipe caches, data, and format system, and then install CM
Click to expand...
Click to collapse
I did do the factory reset. I just wiped the areas separately as well. Anyway, I took your advice and installed the latest stock rom. Now I got the Samsung logo slightly flashing blue for hours instead of the cyanogenmod logo. Did not do anything else.
I suspect that its a battery issue in some way. The last weeks the phone lost its charge very quickly very often (not constantly though). Yesterday, the phone was in my pocket and then went off. It went into the constantly trying to restart despite the lack of batteries state until I removed the battery. Maybe that gives any clue?
ScPo said:
I did do the factory reset. I just wiped the areas separately as well. Anyway, I took your advice and installed the latest stock rom. Now I got the Samsung logo slightly flashing blue for hours instead of the cyanogenmod logo. Did not do anything else.
I suspect that its a battery issue in some way. The last weeks the phone lost its charge very quickly very often (not constantly though). Yesterday, the phone was in my pocket and then went off. It went into the constantly trying to restart despite the lack of batteries state until I removed the battery. Maybe that gives any clue?
Click to expand...
Click to collapse
Try booting into stock recovery, then factory reset from there. Last time I went back to stock I had a bootloop until I did this, then it booted properly. If that doesn't work, maybe try new battery.
Have you tried booting up whilst plugged in to a usb charger?
noppy22 said:
Try booting into stock recovery, then factory reset from there. Last time I went back to stock I had a bootloop until I did this, then it booted properly. If that doesn't work, maybe try new battery.
Have you tried booting up whilst plugged in to a usb charger?
Click to expand...
Click to collapse
Thanks for your helpful input.
I did what you said, even tried it twice now. Phone is still booting after 20 minutes now. I also tried booting up while charging the phone, yes. That was my standard procedure actually, but nothing changes when I unplug it. I don't have a different battery and I am wary of buying one just for the sake of trying. Tried that when my galaxy s 1 broke down and that didn't save the phone. At this point I am contemplating if the phone (s3) is broken now or not. It still reliably boots to the recovery, but it doesn't do much else. How are the chances?
Or has anyone any idea on how to proceed?
ScPo said:
Thanks for your helpful input.
I did what you said, even tried it twice now. Phone is still booting after 20 minutes now. I also tried booting up while charging the phone, yes. That was my standard procedure actually, but nothing changes when I unplug it. I don't have a different battery and I am wary of buying one just for the sake of trying. Tried that when my galaxy s 1 broke down and that didn't save the phone. At this point I am contemplating if the phone (s3) is broken now or not. It still reliably boots to the recovery, but it doesn't do much else. How are the chances?
Or has anyone any idea on how to proceed?
Click to expand...
Click to collapse
Try to boot into recovery. Do a factory reset then boot straight into download mode and flash stock rom. You might have to redownload the firmware it could be corrupted.. If that doesn't work then you might have to send it in. It might cost about to fix. Or go to your local phone repair shop and see if they could fix it for cheaper
Sent from my GT-I9305 using XDA Forums
Hi all,
I have a big problem with my phone.
I wanted to try out Resurrection Remix on my phone.
I installed twrp-3.0.2-0-dogo.img with fastboot.
After reboot i saw the Teamwin logo and then i did a full wipe of everything, except SD Card (like i always do when i install a custom rom)
Then i installed Resurrection Remix M v.5.7.3.zip from sd and gapps, then wiped cache and pressed reboot.
No error with flashing, when the phone booted and i saw some logo's, took like 2-3 minutes and then the phone went off and started to reboot and reboot, had to take the battery off to let it stop.
Since then my phone isn't working properly, i tried to flash different kinds of stock roms with flash tool including wipe options.
No errors with flashing, but the phone still doesn't boot or it goes off after Sony logo then i leave the battery out for 10 mins or so then it starts and it looks normal, i can install aps, i can call, but the first time when i reboot my phone with this new install it's back to rebooting. I tried to leave my battery out for 10 hours but it doesn't help.
I tried to relock my bootloader and then unlock it again.
If i tried to install twrp-3.0.2-0-dogo.img it's going to reboot also, i tried airless or evomix kernel, then recovery starts but when i try to install a custom rom zip, and try to flash it my phone reboots after 5 seconds.
And now i don't know what to do anymore, so please anyone? help?
Thanks in advance!
did you try installing stock rom with flashtool ?
What was your android version when you first flash TWRP 3.0.2 recovery?If you are coming from stock lollipop then you should flash TWRP 3.0.2 (.228).Make sure you unlocked phone bootloader.Use advance clean in the recovery,select all except sd card and clean all.Then try flashing RR Rom again.Do wipe cache/Delvik after flashing RR Rom and before flashing GAPPS.
falptekin said:
did you try installing stock rom with flashtool ?
Click to expand...
Click to collapse
Yes, i tried atleast :
C5503_10.1.1.A.1.310_GLOBAL-LTE.ftf
C5503_10.6.A.0.454_HK.ftf
C5503_10.7.A.0.228_TR.ftf
And used all wipe options.
I used Emma tool, after that i removed the battery from the phone for 48 hours, then it booted the second time. I charged the battery and i left it like this for a few hours, then i tried to reboot but it went off after 20 seconds, tried to boot again but it goes off after Sony logo.
Røbin said:
What was your android version when you first flash TWRP 3.0.2 recovery?If you are coming from stock lollipop then you should flash TWRP 3.0.2 (.228).Make sure you unlocked phone bootloader.Use advance clean in the recovery,select all except sd card and clean all.Then try flashing RR Rom again.Do wipe cache/Delvik after flashing RR Rom and before flashing GAPPS.
Click to expand...
Click to collapse
My version was CM 13 (cm-13.0-20160801-UNOFFICIAL-dogo.zip) that was working very well, but before i flashed RR i did advanced cleaning and i checked everything except SD Card and USB OTG and a factory reset and after flashing pressed wipe cache/dalvik and then i rebooted.
The phone is off now without battery. This Sony doesn't have recovery, buttons aren't working and they never did, i can only flash twrp with fastboot wich makes it only boot into recovery and then i used this to flash custom roms.
I only started to flash custom roms about a month ago because someone gave me this Sony ZR, i bought a new original battery for it but when i call on speaker there is some underwater bubbling sound and i also wanted marshmallow and i hoped this may fix the bubbling sound, with CM 13 the sound was already better but didn't fix it completely.
TWRP won't let me flash anything anymore, it's starting to flash but after 5 seconds it reboots back into recovery.
Edit: Is it possible that there is still stuff in the RAM that is causing problems?
Edit: I thought i'm going to this phone another try. I installed twrp-3.0.2-0-dogo.img and it boots, also this version didn't want to boot anymore but now it does. I wiped everything, also SD Card, i checked everything is empty. Before i couldn't wipe my SD Card anymore and in Windows all files showed double and i couldn't copy files. Going to charge it first and think about what i want try to flash. Wipe cache/dalvik and then flash gapps is a good idea.
Edit: it almost charged now, when it charged i will remove the battery again for the night, i will decide later what i'm going to do.
Fuchsia said:
My version was CM 13 (cm-13.0-20160801-UNOFFICIAL-dogo.zip) that was working very well, but before i flashed RR i did advanced cleaning and i checked everything except SD Card and USB OTG and a factory reset and after flashing pressed wipe cache/dalvik and then i rebooted.
The phone is off now without battery. This Sony doesn't have recovery, buttons aren't working and they never did, i can only flash twrp with fastboot wich makes it only boot into recovery and then i used this to flash custom roms.
I only started to flash custom roms about a month ago because someone gave me this Sony ZR, i bought a new original battery for it but when i call on speaker there is some underwater bubbling sound and i also wanted marshmallow and i hoped this may fix the bubbling sound, with CM 13 the sound was already better but didn't fix it completely.
TWRP won't let me flash anything anymore, it's starting to flash but after 5 seconds it reboots back into recovery.
Edit: Is it possible that there is still stuff in the RAM that is causing problems?
Edit: I thought i'm going to this phone another try. I installed twrp-3.0.2-0-dogo.img and it boots, also this version didn't want to boot anymore but now it does. I wiped everything, also SD Card, i checked everything is empty. Before i couldn't wipe my SD Card anymore and in Windows all files showed double and i couldn't copy files. Going to charge it first and think about what i want try to flash. Wipe cache/dalvik and then flash gapps is a good idea.
Edit: it almost charged now, when it charged i will remove the battery again for the night, i will decide later what i'm going to do.
Click to expand...
Click to collapse
Someone maybe played with your phone in underwater to cause bubbling sound.I don't see any hardware problem in your phone.You maybe did something wrong or anything else that your phone behaving like this.Listen,You first flash a stock rom.Lollipop would be better because you can flash flashable twrp 3.0.2(.228) via flash fire or flashify app.I once tried flashing twrp img through fastboot and it caused bootloop.So I always use flashable zip.Fastboot for emergency.And try to reformatting your system pertition.I hope this will work or you'll need expert developer to help you.Maybe Daedroza can help you if my sugg. don't work.
Røbin said:
Someone maybe played with your phone in underwater to cause bubbling sound.I don't see any hardware problem in your phone.You maybe did something wrong or anything else that your phone behaving like this.Listen,You first flash a stock rom.Lollipop would be better because you can flash flashable twrp 3.0.2(.228) via flash fire or flashify app.I once tried flashing twrp img through fastboot and it caused bootloop.So I always use flashable zip.Fastboot for emergency.And try to reformatting your system pertition.I hope this will work or you'll need expert developer to help you.Maybe Daedroza can help you if my sugg. don't work.
Click to expand...
Click to collapse
The bubbling sound is a known issue with some Sony smartphones, on google i have read more stories about this problem, not only zr but also other Z models. The problem is caused by the second mic i think, if i use loudspeaker when calling and i lay the phone on the back the sound is much better. I saw on other thread about this, http://forum.xda-developers.com/xperia-zr/help/disable-mic-t3434997
On YouTube you can find many movies about this, for example https://www.youtube.com/watch?v=fC6JbuQJ_gg
It's really annoying for the other person to hear these sounds when you are calling. They need to listen very carefully to understand you, but it's only when you call on speaker.
When i wanted to flash a custom rom for the first time i wanted to do this with apps on my phone. I rooted my phone with kingroot and used an app to check if the phone was really rooted. I installed twrp app and tried to install recovery but it gave an error. I tried to install recovery with Flashify but then it says that the recovery partition is not present. When i try to flash with Flashify it says it's going to reboot into recovery but then the the phone boots like normal. The only way for me to get a recovery on the phone is just flashing with fastboot or using flashtool. Doomlord kernel and XZDualrecovery don't boot, only twrp is working.
Fuchsia said:
The bubbling sound is a known issue with some Sony smartphones, on google i have read more stories about this problem, not only zr but also other Z models. The problem is caused by the second mic i think, if i use loudspeaker when calling and i lay the phone on the back the sound is much better. I saw on other thread about this, http://forum.xda-developers.com/xperia-zr/help/disable-mic-t3434997
On YouTube you can find many movies about this, for example https://www.youtube.com/watch?v=fC6JbuQJ_gg
It's really annoying for the other person to hear these sounds when you are calling. They need to listen very carefully to understand you, but it's only when you call on speaker.
When i wanted to flash a custom rom for the first time i wanted to do this with apps on my phone. I rooted my phone with kingroot and used an app to check if the phone was really rooted. I installed twrp app and tried to install recovery but it gave an error. I tried to install recovery with Flashify but then it says that the recovery partition is not present. When i try to flash with Flashify it says it's going to reboot into recovery but then the the phone boots like normal. The only way for me to get a recovery on the phone is just flashing with fastboot or using flashtool. Doomlord kernel and XZDualrecovery don't boot, only twrp is working.
Click to expand...
Click to collapse
First of all change the kingroot with supersu.Kingroot root access control not so stable.Download selinux mode changer to set in permissive mode.If you are at LP version,twrp app won't install recovery or support it.flash twrp3.0.2(.228) via flashify or different flashing app.selinux permissive mode will let you to go to recovery mode.By the way,xzdualrecovery is for locked bootloader and should boot without any problem.I don't know it will work on unlocked bootloader or not.So try your best what I have told and this is all I have to share from my own experience.
Røbin said:
First of all change the kingroot with supersu.Kingroot root access control not so stable.Download selinux mode changer to set in permissive mode.If you are at LP version,twrp app won't install recovery or support it.flash twrp3.0.2(.228) via flashify or different flashing app.selinux permissive mode will let you to go to recovery mode.By the way,xzdualrecovery is for locked bootloader and should boot without any problem.I don't know it will work on unlocked bootloader or not.So try your best what I have told and this is all I have to share from my own experience.
Click to expand...
Click to collapse
I flashed the latest Lollipop and it's back to rebooting, i see the sony logo and before it says powered by android it goes off. I removed the battery again, i will try to root the phone and use selinux mode changer when it's booting. It wil take atleast 12 hours without battery before it boots.
Fuchsia said:
I flashed the latest Lollipop and it's back to rebooting, i see the sony logo and before it says powered by android it goes off. I removed the battery again, i will try to root the phone and use selinux mode changer when it's booting. It wil take atleast 12 hours without battery before it boots.
Click to expand...
Click to collapse
Is there any problem with your phone?Did you experiment your phone too much?I don't get it,why after flashing stock rom via flashtool gives you bootloops if no error showed up while flashing!!Is this your battery problem?And I think so because few months ago my phone battery heavily damaged and therefor It don't charge and my phone didn't bootup but bootlooping.I first thought it was my mistake to flash rom incorrectly.So i had to flash stock rom via flashtool to go back to normal but unfortunetly PC don't recoznige my phone not even fastboot.I was worried and couldn't do anything and went to service center,they changed the battery with new one and my phone comes to life again.Mainly this was for my local charger fault.it also damaged in that day too.SO brought a orginal sony charger.But you said you brought a new battery too then how come you face bootloops.well if there is no error message shows up I can't help you with anything.Only better expert member can help you.By the way you can collect log via adeb fastboot if your phone fastboot mod work.
Here is the inst:
1. Install the Android Debug Bridge using http://developer.android.com/tools/help/adb.html
2. Instructions on installing Android Debug Bridge are located here:
http://www.howtogeek.com/125769/how-to-install-and-use-abd-the-android- debug-bridge-utility
3. Run the following commands:
“adb logcat -c" (This clears the logs.)
4. Reproduce the issue.
5. Then, run the following command to capture the logs in a file:
“adb logcat -d > Name_of_Log_File.txt"
maybe it will gives some clues what is happening.
Røbin said:
Is there any problem with your phone?Did you experiment your phone too much?I don't get it,why after flashing stock rom via flashtool gives you bootloops if no error showed up while flashing!!Is this your battery problem?And I think so because few months ago my phone battery heavily damaged and therefor It don't charge and my phone didn't bootup but bootlooping.I first thought it was my mistake to flash rom incorrectly.So i had to flash stock rom via flashtool to go back to normal but unfortunetly PC don't recoznige my phone not even fastboot.I was worried and couldn't do anything and went to service center,they changed the battery with new one and my phone comes to life again.Mainly this was for my local charger fault.it also damaged in that day too.SO brought a orginal sony charger.But you said you brought a new battery too then how come you face bootloops.well if there is no error message shows up I can't help you with anything.Only better expert member can help you.By the way you can collect log via adeb fastboot if your phone fastboot mod work.
Here is the inst:
1. Install the Android Debug Bridge using http://developer.android.com/tools/help/adb.html
2. Instructions on installing Android Debug Bridge are located here:
http://www.howtogeek.com/125769/how-to-install-and-use-abd-the-android- debug-bridge-utility
3. Run the following commands:
“adb logcat -c" (This clears the logs.)
4. Reproduce the issue.
5. Then, run the following command to capture the logs in a file:
“adb logcat -d > Name_of_Log_File.txt"
maybe it will gives some clues what is happening.
Click to expand...
Click to collapse
I tried my old battery and it boots, already booted up 3x times. I never thought it maybe the battery because it's only 2 months old. Thanks so much for your help.
I tried to install recovery with selinux permissive mode and flashify but i stil can't install recovery.
It says: Partition not found, your recovery partition couldn't be found. You won't be able to flash recovery images. You can stil flash zip files.
I don't think it's possible to have recovery on this phone, atleast not the normal way.
Edit: I flashed RR and it's working fine. I'm so happy it's working again, i never really used this old battery but i think it's not so bad at all. I only lost 8% battery with flashing and booting RR. I never really thought it was the battery because it was charging normal, i used it for 2 months or something without problems.
Fuchsia said:
I tried my old battery and it boots, already booted up 3x times. I never thought it maybe the battery because it's only 2 months old. Thanks so much for your help.
I tried to install recovery with selinux permissive mode and flashify but i stil can't install recovery.
It says: Partition not found, your recovery partition couldn't be found. You won't be able to flash recovery images. You can stil flash zip files.
I don't think it's possible to have recovery on this phone, atleast not the normal way.
Edit: I flashed RR and it's working fine. I'm so happy it's working again, i never really used this old battery but i think it's not so bad at all. I only lost 8% battery with flashing and booting RR. I never really thought it was the battery because it was charging normal, i used it for 2 months or something without problems.
Click to expand...
Click to collapse
If it was a battery problem then change it or carefully use it.And the error you are facing is because the latest flashify has some bugs.But now as you are already using RR MM rom.You can download twrp app and use this app to install recovery.
Røbin said:
If it was a battery problem then change it or carefully use it.And the error you are facing is because the latest flashify has some bugs.But now as you are already using RR MM rom.You can download twrp app and use this app to install recovery.
Click to expand...
Click to collapse
I tried to install recovery, flashify hangs all the time, twrp app gives an error when i try to install recovery and flashfire says there is no partition for this image. I thought i'll do a factory reset in RR and when the phone rebooted i saw twrp. I tried with pressing the buttons when booting but no luck. I used reboot into recovery option and it worked. This is the first custom rom that gave my phone recovery.
I will throw the battery away and use the old battery, i can always buy a new one later.
Fuchsia said:
I tried to install recovery, flashify hangs all the time, twrp app gives an error when i try to install recovery and flashfire says there is no partition for this image. I thought i'll do a factory reset in RR and when the phone rebooted i saw twrp. I tried with pressing the buttons when booting but no luck. I used reboot into recovery option and it worked. This is the first custom rom that gave my phone recovery.
I will throw the battery away and use the old battery, i can always buy a new one later.
Click to expand...
Click to collapse
OH!So that the old recovery occupied all the recovery partition space that you are unable to install twrp recovery.But old recovery should be replaced by new recovery,that's strange.well I don't know how did this happen but don't use fastboot to install recovery or anything else,It's for emergency.I'm not fully familiar with fastboot though,I tried once before and caused trouble. I hope your troubles are gone now.
Røbin said:
OH!So that the old recovery occupied all the recovery partition space that you are unable to install twrp recovery.But old recovery should be replaced by new recovery,that's strange.well I don't know how did this happen but don't use fastboot to install recovery or anything else,It's for emergency.I'm not fully familiar with fastboot though,I tried once before and caused trouble. I hope your troubles are gone now.
Click to expand...
Click to collapse
My phone don't have any partition recovery, i tried 100x times with stock rom to boot recovery, with buttons, with apps that boot in recovery. I do have recovery with RR rom, but it's not in the recovery partition. I tried Tesla, CM 13, XOSP but still no recovery. I tried to boot recovery with all roms, but it doesn't matter. It's fine now, been playing a bit with RR and it's a nice rom. Thank you for helping.
Hello Friends,
Yesterday I was chatting on whatsapp and suddenly my le2 restarts, and then a blue splash screen appears and device keeps on booting,
hence I went to recovery and clear the data, but that also didnt help me,
Then i flash the 13s rom via Flashone 1.9 then also same problem happens, sometimes it went to optimizing apps 3 of 4 and again restarts with blue LED, i were unable to switch it off,
after draining the whole battery I keep mobile to charge but now it is not charging, it only showing Red Solid LED Continuously.
Now I am also Unable to boot into recovery or fastboot mode.
I again flash the stock 13s rom via flashone 1.9 , i got success msg but then also mobile is not booting nor it is charging.
Note: I am on complete stock rom on locked bootloader, never unlocked or rooted, used as come in box.
Please give me a solution on this, I have searched everywhere but not getting any solutions.
Thanks in advance
Try to check your USB cable, most of the time charging issue is due to cable
shubham1358 said:
Try to check your USB cable, most of the time charging issue is due to cable
Click to expand...
Click to collapse
Cable is ok. I have another Le2 and it is charging with that cable very well
I am facing same problem. How you solve this issue? Blue led blinks after flashing any rom and bootloop.
xerol said:
Hello Friends,
Yesterday I was chatting on whatsapp and suddenly my le2 restarts, and then a blue splash screen appears and device keeps on booting,
hence I went to recovery and clear the data, but that also didnt help me,
Then i flash the 13s rom via Flashone 1.9 then also same problem happens, sometimes it went to optimizing apps 3 of 4 and again restarts with blue LED, i were unable to switch it off,
after draining the whole battery I keep mobile to charge but now it is not charging, it only showing Red Solid LED Continuously.
Now I am also Unable to boot into recovery or fastboot mode.
I again flash the stock 13s rom via flashone 1.9 , i got success msg but then also mobile is not booting nor it is charging.
Note: I am on complete stock rom on locked bootloader, never unlocked or rooted, used as come in box.
Please give me a solution on this, I have searched everywhere but not getting any solutions.
Thanks in advance
Click to expand...
Click to collapse
I also have the exact same problem. Phone started rebooting as soon as it booted up. Somehow i managed to unlock the bootloader, but to no avail. Can't seems to find any rom which can boot up. So practically i have a bricked device with trwp. Formatted the system and other partitions with twrp, flashed many roms. Still the result is same. Bootloops.
Hi,
try to to reimage your phone with QFIL from this site:
https://www.techpoison.in/2017/12/how-to-flash-letv-le-2-x526-stock.html
I downloaded everything from there, QFIL, Sparse image and drivers. My phone was bricked, but its working normally now. After you flash the image your phone should charge normally, just try to boot it up. In my case i had issues with baseband, not detected, no sim function and no wifi and phone was restarting each 3-4 minutes, but it was operable. Basedband issues can be solved by hard reseting the phone and updating it to 21s using the local update, just put the 21s stock renamed to update.zip to internal storage and run system update. When you get the error - APK missing, just boot it up again and retry the local update, should work fine the second time, i just deleted the update.zip and put back again and ran the update.
---------- Post added at 03:24 PM ---------- Previous post was at 03:18 PM ----------
Forthe55 said:
I also have the exact same problem. Phone started rebooting as soon as it booted up. Somehow i managed to unlock the bootloader, but to no avail. Can't seems to find any rom which can boot up. So practically i have a bricked device with trwp. Formatted the system and other partitions with twrp, flashed many roms. Still the result is same. Bootloops.
Click to expand...
Click to collapse
Flash the 21s bootloader + modem, one ZIP file, should work fine. Not sure what ROM did you install last time. You can give it a shot with with MIUI 10 - its nougat.
I had similar issues, see my topic, maybe it helps a bit.
https://forum.xda-developers.com/le-2/help/x526-bricked-unknown-baseband-4g-t3838093
Modem + bootloader 21s.
https://drive.google.com/file/d/0B_R...FxTGxlMHM/view
Brother same thing happened to me, a week ago. I cant say about your problem but my problem was due to faulty power button. Actually due to that reason my phone actually kept restarting itself. It showed red light blinking while charging and wasn't able to bypass the optimizing app screen. I also thought it was a software issue but actually it wasn't. I spent about 2 hours figuring out what the actual problem was. The problem was: As we know when power button is hard pressed for about 10-15 seconds it reboots itself.
Although the repair shop guy didn't put new power button but he added a tiny piece of paper in between the power button and body housing to prevent the issue and voila the problem was solved.
delltech1 said:
Hi,
try to to reimage your phone with QFIL from this site:
https://www.techpoison.in/2017/12/how-to-flash-letv-le-2-x526-stock.html
I downloaded everything from there, QFIL, Sparse image and drivers. My phone was bricked, but its working normally now. After you flash the image your phone should charge normally, just try to boot it up. In my case i had issues with baseband, not detected, no sim function and no wifi and phone was restarting each 3-4 minutes, but it was operable. Basedband issues can be solved by hard reseting the phone and updating it to 21s using the local update, just put the 21s stock renamed to update.zip to internal storage and run system update. When you get the error - APK missing, just boot it up again and retry the local update, should work fine the second time, i just deleted the update.zip and put back again and ran the update.
---------- Post added at 03:24 PM ---------- Previous post was at 03:18 PM ----------
Flash the 21s bootloader + modem, one ZIP file, should work fine. Not sure what ROM did you install last time. You can give it a shot with with MIUI 10 - its nougat.
I had similar issues, see my topic, maybe it helps a bit.
https://forum.xda-developers.com/le-2/help/x526-bricked-unknown-baseband-4g-t3838093
Modem + bootloader 21s.
https://drive.google.com/file/d/0B_R...FxTGxlMHM/view
Click to expand...
Click to collapse
Hi, Thanks. I actually did that first, flashing through qfil the same rom. it helped me to go to settings after umpteen attempts to go past language selection screen, and i was just able to oem unlock and enable usb debugging (actually after a 2nd partial failed flashing). the phone kept freezing within seconds of booting up. Now After i unlocked the bootloader and installing twrp and flashing many roms thru twrp, i am still having the same problem of booting up and freezing at start-up. cant flash again through qfil, as i will again loose the unlocked bootloader and twrp.
At least , now i can try different roms to see which can unbrick it. last one used was the twrp flashable rom based on eui (small eui by aurel) but it also freezes on language selection screen or beyond.
I am running out of ideas, lets see.
2nd partial failed flashing? any issues during the flash process? i had some issues when i used usb 3.0, 2.0 worked fine for me. If you have also charging issues stay in twrp and let the phone charge properly, its slower but should work fine. You can try to flash the 21s bootloader with modem, maybe it will boot properly. But try it only when you are able to enter the fastboot mode, longpress volume down and power for 10-15 seconds, if that is working you should be able to flash twrp via fastboot and you can experiment a bit. Try to find the chinesse twrp 3.0.2.0 and try to flash the stock 21s version. Should be also an image file, in standard twrp go to install - image, after selecting the image file click on recovery and install, after installation go back, reboot, recovery. Copy 21s to storage, wipe data, cache, dalvik and flash it, chinesse twrp will skip version check and will let you install the stock image, after install reboot but click on do not replace recovery button - this will keep the chinesse twrp installed.
If nothing helps it can be only a HW failure, maybe the power button, try usb 2.0 port during the flash process, i had issues with 3.0 on my pc, if that doesnt help.try a different cable, no more suggestions, sorry.
delltech1 said:
2nd partial failed flashing? any issues during the flash process? i had some issues when i used usb 3.0, 2.0 worked fine for me. If you have also charging issues stay in twrp and let the phone charge properly, its slower but should work fine. You can try to flash the 21s bootloader with modem, maybe it will boot properly. But try it only when you are able to enter the fastboot mode, longpress volume down and power for 10-15 seconds, if that is working you should be able to flash twrp via fastboot and you can experiment a bit. Try to find the chinesse twrp 3.0.2.0 and try to flash the stock 21s version. Should be also an image file, in standard twrp go to install - image, after selecting the image file click on recovery and install, after installation go back, reboot, recovery. Copy 21s to storage, wipe data, cache, dalvik and flash it, chinesse twrp will skip version check and will let you install the stock image, after install reboot but click on do not replace recovery button - this will keep the chinesse twrp installed.
Click to expand...
Click to collapse
My phone has been flashed multiple times by qfil method. And always it hangs at initial setup (so it boots up, but hangs at language selection or further up screens, before setup can complete and launcher could be loaded).
While trying to flash again with qfil once it stopped at 25 percent (because the battery went dead). Charged the battery and booted up the phone, and i was surprised it booted up. After 2-3 attempts i was able to reach the launcher screen and immediately enabled developer options and oem unlock / usb debugging. Only had few split seconds to do this and the phone froze again. After that i installed twrp and hence treying different roms. Most fail at setup.
Just tried MIUI 9PRO ROM. It also froze at setup multiple times, but once i was able to complete the setup and miui launcher is up , but it reboots or turn off the phone just after that. So cant do anything with the phone. Unsure of whether a newer bootloader will help in these freezing issues as i have been able to boot up at least in some roms only if for few seconds. Will try to tinker the settings of miui rom (if the phone let me do it before freezing/hanging). Lets see. Thanks for suggestions. More suggestions welcome, because i am still unsure weather this is a software or hardware related problem. I am guessing that it may have something to do with Google security as earlier i was getting msg that phone has been wrongly resetted and needs to verify with Google (but i couldn't get a chance to use the same account, as phone kept freezing at setup).
Did you fully charge the battery, if not let it fully charge in twrp. Flashing the roms in twrp works everytime or do you see any errors? Before you flash anything disconnect the usb cable.
---------- Post added at 09:54 PM ---------- Previous post was at 09:47 PM ----------
Try to flash the 21s bootloarder with modem, one zip using twrp. Go to fastboot mode and wipe modems. fastboot erase modem1st fastboot erase modem2st. Put the phone to flash mode and reimage with qfil. Before you do it write down both imeis, you can find them also on the original package on the backside. Also try to remove all sim cards from the phone and try a different cable. If nothing helps, hw issue, maybe the power button mention earlier in this thread.
After reflash skip everything at setup and reset phone to factory defaults. OEM is already unlocked, you dont have to do it again.
I have charged the phone fully before any flashing after that error. I can flash the phone through twrp without any error msg. The phone boots up most of times in various roms but hangs at or after the initial setup screens show (like language selection etc). Flashed the modem+bootloader, success, but it showed bootloader version as 20s (not 21s). Tried the commands u mentioned to erase modems, it say error failed, no such partition found. I had checked the partitions with parted and 56 partitions are there including the modemst1 & 2.
Now re flashed via qfil , did as advised but again the same problem of hanging / freezing at or after initialization screens of various roms.
Forthe55 said:
I have charged the phone fully before any flashing after that error. I can flash the phone through twrp without any error msg. The phone boots up most of times in various roms but hangs at or after the initial setup screens show (like language selection etc). Flashed the modem+bootloader, success, but it showed bootloader version as 20s (not 21s). Tried the commands u mentioned to erase modems, it say error failed, no such partition found. I had checked the partitions with parted and 56 partitions are there including the modemst1 & 2.
Now re flashed via qfil , did as advised but again the same problem of hanging / freezing at or after initialization screens of various roms.
Click to expand...
Click to collapse
Yeah sorry i screwed the command its fastboot erase modest1 modemst2, my bad.
Just now i was able to complete the initialization (setup screen) of sparse image india rom. I can reach the launcher and settings for few seconds before the device freezes or reboots.
So the same problem , with which i started, the only good thing is that i have been able to set oem unlock to on, so that i can flash trwp and various roms (but all fail with the same freezing issues)
Forthe55 said:
Just now i was able to complete the initialization (setup screen) of sparse image india rom. I can reach the launcher and settings for few seconds before the device freezes or reboots.
So the same problem , with which i started, the only good thing is that i have been able to set oem unlock to on, so that i can flash trwp and various roms (but all fail with the same freezing issues)
Click to expand...
Click to collapse
So you erased modems and reflashed with qfil right? If so i assume its a HW problem. Try the fix with the power button, i ran out of ideas
Last thing which can help maybe: https://www.youtube.com/watch?v=LH3VOIlLfvo&t=135s
Download 21s stock image + the chinesse twrp, links should be under the video, i think so, or look somewhere in the forum for new links. Try to reflash the 21s, some people reported that freezing issues were gone after installing the latest EUI. Basically you can do the same after QFIL reflash but you need enough time to copy the ZIP file as UPDATE.ZIP to the internal storage and run the local update via setting, system update and local update, i hope that TWRP will work for you, just follow the video tutorial.
delltech1 said:
Last thing which can help maybe: https://www.youtube.com/watch?v=LH3VOIlLfvo&t=135s
Download 21s stock image + the chinesse twrp, links should be under the video, i think so, or look somewhere in the forum for new links. Try to reflash the 21s, some people reported that freezing issues were gone after installing the latest EUI. Basically you can do the same after QFIL reflash but you need enough time to copy the ZIP file as UPDATE.ZIP to the internal storage and run the local update via setting, system update and local update, i hope that TWRP will work for you, just follow the video tutorial.
Click to expand...
Click to collapse
Did that also, the same problem. The phone freezes after the os is booted. I was wondering what is that isnt touched by flashing ( in download mode or fastboot mode or through twrp). I may need to tinker that. The roms are all fine in the sense they all stop at the same points. Something in the phones partition, which isnt touched by flashing? (There must be, as i flashed with qfil, the oem unlock remains, the bootloader didn't lock, and it remains unaffected by re-imaging)
Try this, maybe it helps:
https://forum.xda-developers.com/le-2/help/issues-installing-twrp-rom-le-s3-x522-t3618662/page2